biscuitboard 1.0.4 → 1.0.6

package/dist/npm.d.cts

@@ -482,8 +482,13 @@ declare const BREADBOARD_CLAD_VIA_HOLE_DIAMETER = 0.3;
 declare const BREADBOARD_CLAD_VIA_PAD_DIAMETER = 0.6;
 declare const BREADBOARD_CLAD_VIA_PITCH = 2.54;
 declare const BREADBOARD_CLAD_VIA_ROW_YS: readonly [-16.51, number, number, 16.51];
-declare const BREADBOARD_OUTER_VIA_ROW_YS: readonly [-24.13, 24.13];
-declare const BREADBOARD_OUTER_VIA_COLUMN_XS: readonly [-27.94, 27.94];
+declare const BREADBOARD_CORNER_VIA_SPACING = 1.3;
+declare const BREADBOARD_CORNER_VIA_ARM_WIDTH = 1.3;
+declare const BREADBOARD_CORNER_VIA_X_INNER_OFFSET = 27;
+declare const BREADBOARD_CORNER_VIA_X_OUTER_OFFSET = 32.2;
+declare const BREADBOARD_CORNER_VIA_Y_INNER_OFFSET = 21;
+declare const BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET = 26.2;
+declare const BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT = 3.9;
 declare const BREADBOARD_MOUNTING_HOLE_DIAMETER = 2.2;
 declare const BREADBOARD_TERMINAL_ROW_LABELS: readonly ["A", "B", "C", "D", "E", "F", "G", "H", "I", "J"];
 type BreadboardTerminalRowLabel = (typeof BREADBOARD_TERMINAL_ROW_LABELS)[number];
@@ -499,7 +504,6 @@ interface BreadboardCladViaPosition {
     y: number;
 }
 declare const BREADBOARD_COLUMN_XS: number[];
-declare const BREADBOARD_OUTER_VERTICAL_VIA_YS: number[];
 declare const BREADBOARD_TERMINAL_ROW_YS: Record<BreadboardTerminalRowLabel, number>;
 /** Individually routable A1-J21 sockets in a conventional breadboard grid. */
 declare const BREADBOARD_TERMINAL_HEADER_POSITIONS: {
@@ -509,47 +513,15 @@ declare const BREADBOARD_TERMINAL_HEADER_POSITIONS: {
     x: number;
     y: number;
 }[];
-declare const BREADBOARD_POWER_RAILS: readonly [{
-    readonly id: "topPositive";
-    readonly label: "+";
-    readonly y: 21.59;
-}, {
-    readonly id: "topNegative";
-    readonly label: "-";
-    readonly y: 19.05;
-}, {
-    readonly id: "bottomPositive";
-    readonly label: "+";
-    readonly y: -19.05;
-}, {
-    readonly id: "bottomNegative";
-    readonly label: "-";
-    readonly y: -21.59;
-}];
-type BreadboardPowerRailId = (typeof BREADBOARD_POWER_RAILS)[number]["id"];
-declare const BREADBOARD_POWER_HEADER_POSITIONS: {
-    rail: "topPositive" | "topNegative" | "bottomPositive" | "bottomNegative";
-    pin: number;
-    label: string;
-    column: number;
-    x: number;
-    y: 21.59 | -21.59 | 19.05 | -19.05;
-}[];
+/** Four two-via-wide L-shaped fields at the board corners. */
+declare const BREADBOARD_CORNER_VIA_POSITIONS: BreadboardCladViaPosition[];
 /**
- * Fixed layer-change rows run through each open channel. A single-via-wide
- * outer field also runs beyond all four sides of the pin headers while staying
- * clear of the tooling holes and board edge.
+ * Fixed layer-change rows run through each open channel and stay clear of the
+ * terminal headers.
  */
-declare const BREADBOARD_CLAD_VIA_POSITIONS: {
-    x: number;
-    y: number;
-}[];
+declare const BREADBOARD_CLAD_VIA_POSITIONS: BreadboardCladViaPosition[];
 /** One connector exposing every terminal socket by its breadboard name. */
 declare const BreadboardTerminalHeaders: (props: ConnectorProps) => react.JSX.Element;
-/** One 1x21 female socket rail; select it with a BREADBOARD_POWER_RAILS id. */
-declare const BreadboardPowerHeader: ({ rail, ...props }: ConnectorProps & {
-    rail: BreadboardPowerRailId;
-}) => react.JSX.Element;
 interface BreadboardCladProps {
     children?: ReactNode;
     autorouter?: AutorouterProp;
@@ -562,10 +534,6 @@ interface BreadboardCladProps {
     /** Per-header no-connect overrides for partially populated designs. */
     headerNoConnects?: {
         terminals?: string[];
-        topPositive?: string[];
-        topNegative?: string[];
-        bottomPositive?: string[];
-        bottomNegative?: string[];
     };
 }
 /**
@@ -766,4 +734,4 @@ type XiaoCladWithPerforatedPinHeadersProps = XiaoCladWithPinHeadersProps;
 /** A XIAO clad whose header pads include perforations along both side edges. */
 declare const XiaoCladWithPerforatedPinHeaders: ({ markHeadersNoConnect, ...props }: XiaoCladWithPerforatedPinHeadersProps) => react.JSX.Element;
 
-export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_OUTER_VERTICAL_VIA_YS, BREADBOARD_OUTER_VIA_COLUMN_XS, BREADBOARD_OUTER_VIA_ROW_YS, BREADBOARD_POWER_HEADER_POSITIONS, BREADBOARD_POWER_RAILS, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardPowerHeader, type BreadboardPowerRailId, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_40X40_EDGE_MOUNTING_HOLE_INSET, CLAD_40X40_HEIGHT, CLAD_40X40_MOUNTING_HOLE_DIAMETER, CLAD_40X40_MOUNTING_HOLE_POSITIONS, CLAD_40X40_VIA_HOLE_DIAMETER, CLAD_40X40_VIA_PAD_DIAMETER, CLAD_40X40_VIA_POSITIONS, CLAD_40X40_VIA_RING_HALF_SIZES, CLAD_40X40_VIA_SPACING, CLAD_40X40_WIDTH, Clad40x40, type Clad40x40Props, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };
+export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_CORNER_VIA_ARM_WIDTH, BREADBOARD_CORNER_VIA_POSITIONS, BREADBOARD_CORNER_VIA_SPACING, BREADBOARD_CORNER_VIA_X_INNER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT, BREADBOARD_CORNER_VIA_Y_INNER_OFFSET, BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_40X40_EDGE_MOUNTING_HOLE_INSET, CLAD_40X40_HEIGHT, CLAD_40X40_MOUNTING_HOLE_DIAMETER, CLAD_40X40_MOUNTING_HOLE_POSITIONS, CLAD_40X40_VIA_HOLE_DIAMETER, CLAD_40X40_VIA_PAD_DIAMETER, CLAD_40X40_VIA_POSITIONS, CLAD_40X40_VIA_RING_HALF_SIZES, CLAD_40X40_VIA_SPACING, CLAD_40X40_WIDTH, Clad40x40, type Clad40x40Props, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };

package/dist/npm.d.ts

@@ -482,8 +482,13 @@ declare const BREADBOARD_CLAD_VIA_HOLE_DIAMETER = 0.3;
 declare const BREADBOARD_CLAD_VIA_PAD_DIAMETER = 0.6;
 declare const BREADBOARD_CLAD_VIA_PITCH = 2.54;
 declare const BREADBOARD_CLAD_VIA_ROW_YS: readonly [-16.51, number, number, 16.51];
-declare const BREADBOARD_OUTER_VIA_ROW_YS: readonly [-24.13, 24.13];
-declare const BREADBOARD_OUTER_VIA_COLUMN_XS: readonly [-27.94, 27.94];
+declare const BREADBOARD_CORNER_VIA_SPACING = 1.3;
+declare const BREADBOARD_CORNER_VIA_ARM_WIDTH = 1.3;
+declare const BREADBOARD_CORNER_VIA_X_INNER_OFFSET = 27;
+declare const BREADBOARD_CORNER_VIA_X_OUTER_OFFSET = 32.2;
+declare const BREADBOARD_CORNER_VIA_Y_INNER_OFFSET = 21;
+declare const BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET = 26.2;
+declare const BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT = 3.9;
 declare const BREADBOARD_MOUNTING_HOLE_DIAMETER = 2.2;
 declare const BREADBOARD_TERMINAL_ROW_LABELS: readonly ["A", "B", "C", "D", "E", "F", "G", "H", "I", "J"];
 type BreadboardTerminalRowLabel = (typeof BREADBOARD_TERMINAL_ROW_LABELS)[number];
@@ -499,7 +504,6 @@ interface BreadboardCladViaPosition {
     y: number;
 }
 declare const BREADBOARD_COLUMN_XS: number[];
-declare const BREADBOARD_OUTER_VERTICAL_VIA_YS: number[];
 declare const BREADBOARD_TERMINAL_ROW_YS: Record<BreadboardTerminalRowLabel, number>;
 /** Individually routable A1-J21 sockets in a conventional breadboard grid. */
 declare const BREADBOARD_TERMINAL_HEADER_POSITIONS: {
@@ -509,47 +513,15 @@ declare const BREADBOARD_TERMINAL_HEADER_POSITIONS: {
     x: number;
     y: number;
 }[];
-declare const BREADBOARD_POWER_RAILS: readonly [{
-    readonly id: "topPositive";
-    readonly label: "+";
-    readonly y: 21.59;
-}, {
-    readonly id: "topNegative";
-    readonly label: "-";
-    readonly y: 19.05;
-}, {
-    readonly id: "bottomPositive";
-    readonly label: "+";
-    readonly y: -19.05;
-}, {
-    readonly id: "bottomNegative";
-    readonly label: "-";
-    readonly y: -21.59;
-}];
-type BreadboardPowerRailId = (typeof BREADBOARD_POWER_RAILS)[number]["id"];
-declare const BREADBOARD_POWER_HEADER_POSITIONS: {
-    rail: "topPositive" | "topNegative" | "bottomPositive" | "bottomNegative";
-    pin: number;
-    label: string;
-    column: number;
-    x: number;
-    y: 21.59 | -21.59 | 19.05 | -19.05;
-}[];
+/** Four two-via-wide L-shaped fields at the board corners. */
+declare const BREADBOARD_CORNER_VIA_POSITIONS: BreadboardCladViaPosition[];
 /**
- * Fixed layer-change rows run through each open channel. A single-via-wide
- * outer field also runs beyond all four sides of the pin headers while staying
- * clear of the tooling holes and board edge.
+ * Fixed layer-change rows run through each open channel and stay clear of the
+ * terminal headers.
  */
-declare const BREADBOARD_CLAD_VIA_POSITIONS: {
-    x: number;
-    y: number;
-}[];
+declare const BREADBOARD_CLAD_VIA_POSITIONS: BreadboardCladViaPosition[];
 /** One connector exposing every terminal socket by its breadboard name. */
 declare const BreadboardTerminalHeaders: (props: ConnectorProps) => react.JSX.Element;
-/** One 1x21 female socket rail; select it with a BREADBOARD_POWER_RAILS id. */
-declare const BreadboardPowerHeader: ({ rail, ...props }: ConnectorProps & {
-    rail: BreadboardPowerRailId;
-}) => react.JSX.Element;
 interface BreadboardCladProps {
     children?: ReactNode;
     autorouter?: AutorouterProp;
@@ -562,10 +534,6 @@ interface BreadboardCladProps {
     /** Per-header no-connect overrides for partially populated designs. */
     headerNoConnects?: {
         terminals?: string[];
-        topPositive?: string[];
-        topNegative?: string[];
-        bottomPositive?: string[];
-        bottomNegative?: string[];
     };
 }
 /**
@@ -766,4 +734,4 @@ type XiaoCladWithPerforatedPinHeadersProps = XiaoCladWithPinHeadersProps;
 /** A XIAO clad whose header pads include perforations along both side edges. */
 declare const XiaoCladWithPerforatedPinHeaders: ({ markHeadersNoConnect, ...props }: XiaoCladWithPerforatedPinHeadersProps) => react.JSX.Element;
 
-export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_OUTER_VERTICAL_VIA_YS, BREADBOARD_OUTER_VIA_COLUMN_XS, BREADBOARD_OUTER_VIA_ROW_YS, BREADBOARD_POWER_HEADER_POSITIONS, BREADBOARD_POWER_RAILS, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardPowerHeader, type BreadboardPowerRailId, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_40X40_EDGE_MOUNTING_HOLE_INSET, CLAD_40X40_HEIGHT, CLAD_40X40_MOUNTING_HOLE_DIAMETER, CLAD_40X40_MOUNTING_HOLE_POSITIONS, CLAD_40X40_VIA_HOLE_DIAMETER, CLAD_40X40_VIA_PAD_DIAMETER, CLAD_40X40_VIA_POSITIONS, CLAD_40X40_VIA_RING_HALF_SIZES, CLAD_40X40_VIA_SPACING, CLAD_40X40_WIDTH, Clad40x40, type Clad40x40Props, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };
+export { ARDUINO_SHIELD_CLAD_HEIGHT, ARDUINO_SHIELD_CLAD_VIA_CANDIDATE_ZONES, ARDUINO_SHIELD_CLAD_VIA_HOLE_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_OUTER_DIAMETER, ARDUINO_SHIELD_CLAD_VIA_POSITIONS, ARDUINO_SHIELD_CLAD_VIA_SPACING, ARDUINO_SHIELD_CLAD_WIDTH, ARDUINO_SHIELD_CONNECTOR_OFFSET_X, ARDUINO_SHIELD_HEADER_PITCH, ARDUINO_SHIELD_HEADER_PLACEMENTS, ARDUINO_SHIELD_HEADER_ROW_Y, ARDUINO_SHIELD_MOUNTING_HOLE_DIAMETER, ARDUINO_SHIELD_MOUNTING_HOLE_POSITIONS, ArduinoShieldAnalogHeader, ArduinoShieldClad, type ArduinoShieldCladProps, type ArduinoShieldCladViaPosition, ArduinoShieldDigital0To7Header, ArduinoShieldDigital8To13Header, ArduinoShieldIcspSocket, ArduinoShieldPowerHeader, BISCUIT_BOARD_HEIGHT, BISCUIT_BOARD_MOUNTING_HOLE_POSITIONS, BISCUIT_BOARD_VIA_POSITIONS, BISCUIT_BOARD_VIA_ZONES, BISCUIT_BOARD_WIDTH, BOOSTERPACK_CLAD_HEIGHT, BOOSTERPACK_CLAD_MOUNTING_HOLE_VIA_CLEARANCE, BOOSTERPACK_CLAD_PLACEMENT_ZONES, BOOSTERPACK_CLAD_VIA_CANDIDATE_ZONES, BOOSTERPACK_CLAD_VIA_EXCLUSION_ZONES, BOOSTERPACK_CLAD_VIA_OUTER_DIAMETER, BOOSTERPACK_CLAD_VIA_PITCH, BOOSTERPACK_CLAD_VIA_POSITIONS, BOOSTERPACK_CLAD_WIDTH, BOOSTERPACK_CORNER_VERTICAL_ARM_INNER_Y, BOOSTERPACK_EDGE_BAND_CENTER_GAP, BOOSTERPACK_EDGE_BAND_OUTER_X, BOOSTERPACK_EDGE_HEADER_CENTER_X, BOOSTERPACK_EDGE_HEADER_PIN_COUNT, BOOSTERPACK_HEADER_CENTER_X, BOOSTERPACK_HEADER_CENTER_Y, BOOSTERPACK_HEADER_PITCH, BOOSTERPACK_MIDDLE_VIA_CLUSTER_CENTER_X, BOOSTERPACK_MIDDLE_VIA_CLUSTER_HEIGHT, BOOSTERPACK_MIDDLE_VIA_CLUSTER_WIDTH, BREADBOARD_CLAD_HEIGHT, BREADBOARD_CLAD_VIA_HOLE_DIAMETER, BREADBOARD_CLAD_VIA_PAD_DIAMETER, BREADBOARD_CLAD_VIA_PITCH, BREADBOARD_CLAD_VIA_POSITIONS, BREADBOARD_CLAD_VIA_ROW_YS, BREADBOARD_CLAD_WIDTH, BREADBOARD_COLUMN_COUNT, BREADBOARD_COLUMN_XS, BREADBOARD_CORNER_VIA_ARM_WIDTH, BREADBOARD_CORNER_VIA_POSITIONS, BREADBOARD_CORNER_VIA_SPACING, BREADBOARD_CORNER_VIA_X_INNER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTER_OFFSET, BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT, BREADBOARD_CORNER_VIA_Y_INNER_OFFSET, BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET, BREADBOARD_HEADER_HOLE_DIAMETER, BREADBOARD_HEADER_PAD_DIAMETER, BREADBOARD_HEADER_PITCH, BREADBOARD_MOUNTING_HOLE_DIAMETER, BREADBOARD_TERMINAL_HEADER_POSITIONS, BREADBOARD_TERMINAL_ROW_LABELS, BREADBOARD_TERMINAL_ROW_YS, BiscuitBoard, type BiscuitBoardAutorouterOptions, type BiscuitBoardProps, type BiscuitBoardViaPosition, BoosterPackClad, type BoosterPackCladPlacementZone, type BoosterPackCladProps, type BoosterPackCladViaPosition, BoosterPackEdgePinHeader, BoosterPackLeftHeader, BoosterPackRightHeader, BreadboardClad, type BreadboardCladProps, type BreadboardCladViaPosition, type BreadboardHeaderPosition, BreadboardTerminalHeaders, type BreadboardTerminalRowLabel, CLAD_40X40_EDGE_MOUNTING_HOLE_INSET, CLAD_40X40_HEIGHT, CLAD_40X40_MOUNTING_HOLE_DIAMETER, CLAD_40X40_MOUNTING_HOLE_POSITIONS, CLAD_40X40_VIA_HOLE_DIAMETER, CLAD_40X40_VIA_PAD_DIAMETER, CLAD_40X40_VIA_POSITIONS, CLAD_40X40_VIA_RING_HALF_SIZES, CLAD_40X40_VIA_SPACING, CLAD_40X40_WIDTH, Clad40x40, type Clad40x40Props, FEATHER_CLAD_HEIGHT, FEATHER_CLAD_VIA_HOLE_DIAMETER, FEATHER_CLAD_VIA_PAD_DIAMETER, FEATHER_CLAD_VIA_POSITIONS, FEATHER_CLAD_VIA_SPACING, FEATHER_CLAD_WIDTH, FEATHER_HEADER_HOLE_DIAMETER, FEATHER_HEADER_PAD_DIAMETER, FEATHER_HEADER_PITCH, FEATHER_HEADER_POSITIONS, FEATHER_HEADER_ROW_SPACING, FEATHER_MOUNTING_HOLE_DIAMETER, FEATHER_MOUNTING_HOLE_POSITIONS, FEATHER_PIN_LABELS, FEATHER_PIN_NAMES, FeatherCladWithPinHeaders, type FeatherCladWithPinHeadersProps, FeatherPinHeaders, type PrefabricatedViaAutorouterConfig, XIAO_CLAD_HEIGHT, XIAO_CLAD_VIA_HOLE_DIAMETER, XIAO_CLAD_VIA_PAD_DIAMETER, XIAO_CLAD_VIA_POSITIONS, XIAO_CLAD_VIA_SPACING, XIAO_CLAD_WIDTH, XIAO_HEADER_HOLE_DIAMETER, XIAO_HEADER_PAD_DIAMETER, XIAO_HEADER_PITCH, XIAO_HEADER_POSITIONS, XIAO_HEADER_ROW_SPACING, XIAO_PERFORATED_HEADER_PAD_HEIGHT, XIAO_PERFORATED_HEADER_PAD_WIDTH, XIAO_PERFORATION_HOLE_DIAMETER, XIAO_PERFORATION_POSITIONS, XIAO_PIN_LABELS, XIAO_PIN_NAMES, XiaoCladLayout, type XiaoCladLayoutProps, XiaoCladWithPerforatedPinHeaders, type XiaoCladWithPerforatedPinHeadersProps, XiaoCladWithPinHeaders, type XiaoCladWithPinHeadersProps, XiaoPerforatedPinHeaders, XiaoPinHeaders, createBiscuitBoardAutorouter, createPrefabricatedViaAutorouter };

package/dist/npm.js

@@ -15450,8 +15450,13 @@ var BREADBOARD_CLAD_VIA_ROW_YS = [
   BREADBOARD_HEADER_PITCH / 2,
   16.51
 ];
-var BREADBOARD_OUTER_VIA_ROW_YS = [-24.13, 24.13];
-var BREADBOARD_OUTER_VIA_COLUMN_XS = [-27.94, 27.94];
+var BREADBOARD_CORNER_VIA_SPACING = 1.3;
+var BREADBOARD_CORNER_VIA_ARM_WIDTH = 1.3;
+var BREADBOARD_CORNER_VIA_X_INNER_OFFSET = 27;
+var BREADBOARD_CORNER_VIA_X_OUTER_OFFSET = 32.2;
+var BREADBOARD_CORNER_VIA_Y_INNER_OFFSET = 21;
+var BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET = 26.2;
+var BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT = 3.9;
 var BREADBOARD_MOUNTING_HOLE_DIAMETER = 2.2;
 var BREADBOARD_CLAD_EDGE_CLEARANCE = 0.2;
 var BREADBOARD_CLAD_EDGE_CLEARANCE_VALIDATION_TOLERANCE = 1e-3;
@@ -15469,16 +15474,18 @@ var BREADBOARD_TERMINAL_ROW_LABELS = [
   "J"
 ];
 var roundCoordinate3 = (value) => Math.round(value * 1e6) / 1e6;
+var createPitchedRange = (start, end) => Array.from(
+  {
+    length: Math.round((end - start) / BREADBOARD_CORNER_VIA_SPACING) + 1
+  },
+  (_, index) => roundCoordinate3(start + index * BREADBOARD_CORNER_VIA_SPACING)
+);
 var BREADBOARD_COLUMN_XS = Array.from(
   { length: BREADBOARD_COLUMN_COUNT },
   (_, index) => roundCoordinate3(
     (index - (BREADBOARD_COLUMN_COUNT - 1) / 2) * BREADBOARD_HEADER_PITCH
   )
 );
-var BREADBOARD_OUTER_VERTICAL_VIA_YS = Array.from(
-  { length: 18 },
-  (_, index) => roundCoordinate3(-21.59 + index * BREADBOARD_CLAD_VIA_PITCH)
-);
 var BREADBOARD_TERMINAL_ROW_YS = Object.fromEntries(
   BREADBOARD_TERMINAL_ROW_LABELS.map((label, index) => {
     const bankIndex = index < 5 ? index : index - 5;
@@ -15495,32 +15502,61 @@ var BREADBOARD_TERMINAL_HEADER_POSITIONS = BREADBOARD_TERMINAL_ROW_LABELS.flatMa
     y: BREADBOARD_TERMINAL_ROW_YS[row]
   }))
 );
-var BREADBOARD_POWER_RAILS = [
-  { id: "topPositive", label: "+", y: 21.59 },
-  { id: "topNegative", label: "-", y: 19.05 },
-  { id: "bottomPositive", label: "+", y: -19.05 },
-  { id: "bottomNegative", label: "-", y: -21.59 }
-];
-var BREADBOARD_POWER_HEADER_POSITIONS = BREADBOARD_POWER_RAILS.flatMap(
-  (rail) => BREADBOARD_COLUMN_XS.map((x, columnIndex) => ({
-    rail: rail.id,
-    pin: columnIndex + 1,
-    label: `${rail.id}${columnIndex + 1}`,
-    column: columnIndex + 1,
-    x,
-    y: rail.y
-  }))
+var cornerViaAxisX = createPitchedRange(
+  BREADBOARD_CORNER_VIA_X_INNER_OFFSET,
+  BREADBOARD_CORNER_VIA_X_OUTER_OFFSET
+);
+var cornerViaAxisY = createPitchedRange(
+  BREADBOARD_CORNER_VIA_Y_INNER_OFFSET,
+  BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET
+);
+var cornerViaArmAxisX = createPitchedRange(
+  BREADBOARD_CORNER_VIA_X_INNER_OFFSET,
+  BREADBOARD_CORNER_VIA_X_INNER_OFFSET + BREADBOARD_CORNER_VIA_ARM_WIDTH
+);
+var cornerViaArmAxisY = createPitchedRange(
+  BREADBOARD_CORNER_VIA_Y_INNER_OFFSET,
+  BREADBOARD_CORNER_VIA_Y_INNER_OFFSET + BREADBOARD_CORNER_VIA_ARM_WIDTH
+);
+var createCornerViaPositions = (xSign, ySign, xOutwardShift = 0) => {
+  const shiftedCornerViaAxisX = cornerViaAxisX.map(
+    (x) => roundCoordinate3(x + xOutwardShift)
+  );
+  const shiftedCornerViaArmAxisX = cornerViaArmAxisX.map(
+    (x) => roundCoordinate3(x + xOutwardShift)
+  );
+  const horizontalArm = shiftedCornerViaAxisX.flatMap(
+    (x) => cornerViaArmAxisY.map((y) => ({ x: x * xSign, y: y * ySign }))
+  );
+  const verticalArm = shiftedCornerViaArmAxisX.flatMap(
+    (x) => cornerViaAxisY.map((y) => ({ x: x * xSign, y: y * ySign }))
+  );
+  return Array.from(
+    new Map(
+      [...horizontalArm, ...verticalArm].map((point) => [
+        `${point.x},${point.y}`,
+        point
+      ])
+    ).values()
+  );
+};
+var BREADBOARD_CORNER_VIA_POSITIONS = [
+  [-1, -1],
+  [-1, 1],
+  [1, -1],
+  [1, 1]
+].flatMap(
+  ([xSign, ySign]) => createCornerViaPositions(
+    xSign,
+    ySign,
+    xSign === -1 || ySign === -1 ? BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT : 0
+  )
 );
 var BREADBOARD_CLAD_VIA_POSITIONS = [
   ...BREADBOARD_CLAD_VIA_ROW_YS.flatMap(
     (y) => BREADBOARD_COLUMN_XS.map((x) => ({ x, y }))
   ),
-  ...BREADBOARD_OUTER_VIA_ROW_YS.flatMap(
-    (y) => BREADBOARD_COLUMN_XS.map((x) => ({ x, y }))
-  ),
-  ...BREADBOARD_OUTER_VIA_COLUMN_XS.flatMap(
-    (x) => BREADBOARD_OUTER_VERTICAL_VIA_YS.map((y) => ({ x, y }))
-  )
+  ...BREADBOARD_CORNER_VIA_POSITIONS
 ];
 var terminalPinLabels = Object.fromEntries(
   BREADBOARD_TERMINAL_HEADER_POSITIONS.map((position) => [
@@ -15528,16 +15564,9 @@ var terminalPinLabels = Object.fromEntries(
     [position.label]
   ])
 );
-var powerPinLabels = Object.fromEntries(
-  BREADBOARD_COLUMN_XS.map((_, index) => [
-    `pin${index + 1}`,
-    [`COL${index + 1}`]
-  ])
-);
 var terminalPinNames = BREADBOARD_TERMINAL_HEADER_POSITIONS.map(
   (position) => `pin${position.pin}`
 );
-var powerPinNames = BREADBOARD_COLUMN_XS.map((_, index) => `pin${index + 1}`);
 var BreadboardTerminalHeaderFootprint = () => /* @__PURE__ */ jsx4("footprint", { insertionDirection: "from_above", children: BREADBOARD_TERMINAL_HEADER_POSITIONS.map((position) => /* @__PURE__ */ jsx4(Fragment4, { children: position.pin === 1 ? /* @__PURE__ */ jsx4(
   "platedhole",
   {
@@ -15560,26 +15589,6 @@ var BreadboardTerminalHeaderFootprint = () => /* @__PURE__ */ jsx4("footprint",
     pcbY: position.y
   }
 ) }, `terminal-${position.label}`)) });
-var BreadboardPowerHeaderFootprint = () => /* @__PURE__ */ jsx4("footprint", { insertionDirection: "from_above", children: BREADBOARD_COLUMN_XS.map((x, index) => /* @__PURE__ */ jsx4(Fragment4, { children: index === 0 ? /* @__PURE__ */ jsx4(
-  "platedhole",
-  {
-    portHints: [`pin${index + 1}`],
-    shape: "circular_hole_with_rect_pad",
-    holeDiameter: `${BREADBOARD_HEADER_HOLE_DIAMETER}mm`,
-    rectPadWidth: `${BREADBOARD_HEADER_PAD_DIAMETER}mm`,
-    rectPadHeight: `${BREADBOARD_HEADER_PAD_DIAMETER}mm`,
-    pcbX: x
-  }
-) : /* @__PURE__ */ jsx4(
-  "platedhole",
-  {
-    portHints: [`pin${index + 1}`],
-    shape: "circle",
-    holeDiameter: `${BREADBOARD_HEADER_HOLE_DIAMETER}mm`,
-    outerDiameter: `${BREADBOARD_HEADER_PAD_DIAMETER}mm`,
-    pcbX: x
-  }
-) }, `power-pin-${index + 1}`)) });
 var BreadboardTerminalHeaders = (props) => /* @__PURE__ */ jsx4(
   "connector",
   {
@@ -15590,20 +15599,6 @@ var BreadboardTerminalHeaders = (props) => /* @__PURE__ */ jsx4(
     ...props
   }
 );
-var BreadboardPowerHeader = ({
-  rail,
-  ...props
-}) => /* @__PURE__ */ jsx4(
-  "connector",
-  {
-    pinLabels: powerPinLabels,
-    manufacturerPartNumber: "GENERIC-BREADBOARD-1X21-FEMALE-2.54MM",
-    footprint: /* @__PURE__ */ jsx4(BreadboardPowerHeaderFootprint, {}),
-    noSchematicRepresentation: true,
-    pcbY: BREADBOARD_POWER_RAILS.find((candidate) => candidate.id === rail).y,
-    ...props
-  }
-);
 var BreadboardClad = ({
   children,
   autorouter,
@@ -15652,14 +15647,6 @@ var BreadboardClad = ({
           noConnect: headerNoConnects?.terminals ?? (markHeadersNoConnect ? terminalPinNames : void 0)
         }
       ),
-      BREADBOARD_POWER_RAILS.map((rail) => /* @__PURE__ */ jsx4(Fragment4, { children: /* @__PURE__ */ jsx4(
-        BreadboardPowerHeader,
-        {
-          rail: rail.id,
-          name: `J_${rail.id.replace(/([A-Z])/g, "_$1").toUpperCase()}`,
-          noConnect: headerNoConnects?.[rail.id] ?? (markHeadersNoConnect ? powerPinNames : void 0)
-        }
-      ) }, rail.id)),
       [1, 5, 10, 15, 20, BREADBOARD_COLUMN_COUNT].map((column) => /* @__PURE__ */ jsx4(Fragment4, { children: /* @__PURE__ */ jsx4(
         "silkscreentext",
         {
@@ -16360,15 +16347,18 @@ export {
   BREADBOARD_CLAD_WIDTH,
   BREADBOARD_COLUMN_COUNT,
   BREADBOARD_COLUMN_XS,
+  BREADBOARD_CORNER_VIA_ARM_WIDTH,
+  BREADBOARD_CORNER_VIA_POSITIONS,
+  BREADBOARD_CORNER_VIA_SPACING,
+  BREADBOARD_CORNER_VIA_X_INNER_OFFSET,
+  BREADBOARD_CORNER_VIA_X_OUTER_OFFSET,
+  BREADBOARD_CORNER_VIA_X_OUTWARD_SHIFT,
+  BREADBOARD_CORNER_VIA_Y_INNER_OFFSET,
+  BREADBOARD_CORNER_VIA_Y_OUTER_OFFSET,
   BREADBOARD_HEADER_HOLE_DIAMETER,
   BREADBOARD_HEADER_PAD_DIAMETER,
   BREADBOARD_HEADER_PITCH,
   BREADBOARD_MOUNTING_HOLE_DIAMETER,
-  BREADBOARD_OUTER_VERTICAL_VIA_YS,
-  BREADBOARD_OUTER_VIA_COLUMN_XS,
-  BREADBOARD_OUTER_VIA_ROW_YS,
-  BREADBOARD_POWER_HEADER_POSITIONS,
-  BREADBOARD_POWER_RAILS,
   BREADBOARD_TERMINAL_HEADER_POSITIONS,
   BREADBOARD_TERMINAL_ROW_LABELS,
   BREADBOARD_TERMINAL_ROW_YS,
@@ -16378,7 +16368,6 @@ export {
   BoosterPackLeftHeader,
   BoosterPackRightHeader,
   BreadboardClad,
-  BreadboardPowerHeader,
   BreadboardTerminalHeaders,
   CLAD_40X40_EDGE_MOUNTING_HOLE_INSET,
   CLAD_40X40_HEIGHT,