biscuitboard 1.0.10 → 1.0.11

package/dist/npm.cjs

@@ -807,17 +807,20 @@ __export(npm_exports, {
   BoosterPackRightHeader: () => BoosterPackRightHeader,
   BreadboardClad: () => BreadboardClad,
   BreadboardTerminalHeaders: () => BreadboardTerminalHeaders,
-  CLAD_40X40_EDGE_MOUNTING_HOLE_INSET: () => CLAD_40X40_EDGE_MOUNTING_HOLE_INSET,
-  CLAD_40X40_HEIGHT: () => CLAD_40X40_HEIGHT,
-  CLAD_40X40_MOUNTING_HOLE_DIAMETER: () => CLAD_40X40_MOUNTING_HOLE_DIAMETER,
-  CLAD_40X40_MOUNTING_HOLE_POSITIONS: () => CLAD_40X40_MOUNTING_HOLE_POSITIONS,
-  CLAD_40X40_VIA_HOLE_DIAMETER: () => CLAD_40X40_VIA_HOLE_DIAMETER,
-  CLAD_40X40_VIA_PAD_DIAMETER: () => CLAD_40X40_VIA_PAD_DIAMETER,
-  CLAD_40X40_VIA_POSITIONS: () => CLAD_40X40_VIA_POSITIONS,
-  CLAD_40X40_VIA_RING_HALF_SIZES: () => CLAD_40X40_VIA_RING_HALF_SIZES,
-  CLAD_40X40_VIA_SPACING: () => CLAD_40X40_VIA_SPACING,
-  CLAD_40X40_WIDTH: () => CLAD_40X40_WIDTH,
-  Clad40x40: () => Clad40x40,
+  CLAD_32X32_EDGE_CONNECTOR_OPENING: () => CLAD_32X32_EDGE_CONNECTOR_OPENING,
+  CLAD_32X32_HEIGHT: () => CLAD_32X32_HEIGHT,
+  CLAD_32X32_MOUNTING_HOLE_DIAMETER: () => CLAD_32X32_MOUNTING_HOLE_DIAMETER,
+  CLAD_32X32_MOUNTING_HOLE_INSET: () => CLAD_32X32_MOUNTING_HOLE_INSET,
+  CLAD_32X32_MOUNTING_HOLE_POSITIONS: () => CLAD_32X32_MOUNTING_HOLE_POSITIONS,
+  CLAD_32X32_VIA_ARM_INNER_OFFSET: () => CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_OUTER_OFFSET: () => CLAD_32X32_VIA_ARM_OUTER_OFFSET,
+  CLAD_32X32_VIA_ARM_WIDTH: () => CLAD_32X32_VIA_ARM_WIDTH,
+  CLAD_32X32_VIA_HOLE_DIAMETER: () => CLAD_32X32_VIA_HOLE_DIAMETER,
+  CLAD_32X32_VIA_PAD_DIAMETER: () => CLAD_32X32_VIA_PAD_DIAMETER,
+  CLAD_32X32_VIA_POSITIONS: () => CLAD_32X32_VIA_POSITIONS,
+  CLAD_32X32_VIA_SPACING: () => CLAD_32X32_VIA_SPACING,
+  CLAD_32X32_WIDTH: () => CLAD_32X32_WIDTH,
+  Clad32x32: () => Clad32x32,
   FEATHER_CLAD_HEIGHT: () => FEATHER_CLAD_HEIGHT,
   FEATHER_CLAD_VIA_HOLE_DIAMETER: () => FEATHER_CLAD_VIA_HOLE_DIAMETER,
   FEATHER_CLAD_VIA_PAD_DIAMETER: () => FEATHER_CLAD_VIA_PAD_DIAMETER,
@@ -15870,46 +15873,67 @@ var BreadboardClad = ({
   }
 );
 
-// lib/Clad40x40.tsx
+// lib/Clad32x32.tsx
 var import_react5 = require("react");
 var import_jsx_runtime5 = require("react/jsx-runtime");
-var CLAD_40X40_WIDTH = 40;
-var CLAD_40X40_HEIGHT = 40;
-var CLAD_40X40_MOUNTING_HOLE_DIAMETER = 2;
-var CLAD_40X40_EDGE_MOUNTING_HOLE_INSET = 3;
-var CLAD_40X40_VIA_HOLE_DIAMETER = 0.3;
-var CLAD_40X40_VIA_PAD_DIAMETER = 0.6;
-var CLAD_40X40_VIA_SPACING = 1.3;
-var CLAD_40X40_VIA_RING_HALF_SIZES = [2.6, 3.9, 5.2];
-var CLAD_40X40_MOUNTING_HOLE_POSITIONS = [
-  { x: 0, y: 0 },
-  {
-    x: CLAD_40X40_WIDTH / 2 - CLAD_40X40_EDGE_MOUNTING_HOLE_INSET,
-    y: CLAD_40X40_HEIGHT / 2 - CLAD_40X40_EDGE_MOUNTING_HOLE_INSET
-  }
+var CLAD_32X32_WIDTH = 32;
+var CLAD_32X32_HEIGHT = 32;
+var CLAD_32X32_MOUNTING_HOLE_DIAMETER = 2;
+var CLAD_32X32_MOUNTING_HOLE_INSET = 3;
+var CLAD_32X32_VIA_HOLE_DIAMETER = 0.3;
+var CLAD_32X32_VIA_PAD_DIAMETER = 0.6;
+var CLAD_32X32_VIA_SPACING = 1.3;
+var CLAD_32X32_VIA_ARM_INNER_OFFSET = 9.1;
+var CLAD_32X32_VIA_ARM_OUTER_OFFSET = 14.3;
+var CLAD_32X32_VIA_ARM_WIDTH = 1.3;
+var CLAD_32X32_EDGE_CONNECTOR_OPENING = CLAD_32X32_VIA_ARM_INNER_OFFSET * 2;
+var mountingHoleCenterOffset = CLAD_32X32_WIDTH / 2 - CLAD_32X32_MOUNTING_HOLE_INSET;
+var CLAD_32X32_MOUNTING_HOLE_POSITIONS = [
+  { x: -mountingHoleCenterOffset, y: -mountingHoleCenterOffset },
+  { x: -mountingHoleCenterOffset, y: mountingHoleCenterOffset },
+  { x: mountingHoleCenterOffset, y: -mountingHoleCenterOffset },
+  { x: mountingHoleCenterOffset, y: mountingHoleCenterOffset }
 ];
-var CLAD_40X40_EDGE_CLEARANCE = 0.2;
-var CLAD_40X40_EDGE_CLEARANCE_VALIDATION_TOLERANCE = 1e-3;
-var createSquareViaRingPositions = (halfSize) => {
-  const axisPositions = Array.from(
-    { length: Math.round(halfSize * 2 / CLAD_40X40_VIA_SPACING) + 1 },
-    (_, index) => Math.round((-halfSize + index * CLAD_40X40_VIA_SPACING) * 1e6) / 1e6
+var CLAD_32X32_EDGE_CLEARANCE = 0.2;
+var CLAD_32X32_EDGE_CLEARANCE_VALIDATION_TOLERANCE = 1e-3;
+var roundCoordinate4 = (value) => Math.round(value * 1e6) / 1e6;
+var createPitchedRange2 = (start, end) => Array.from(
+  {
+    length: Math.round((end - start) / CLAD_32X32_VIA_SPACING) + 1
+  },
+  (_, index) => roundCoordinate4(start + index * CLAD_32X32_VIA_SPACING)
+);
+var cornerAxis = createPitchedRange2(
+  CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_OUTER_OFFSET
+);
+var armAxis = createPitchedRange2(
+  CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_INNER_OFFSET + CLAD_32X32_VIA_ARM_WIDTH
+);
+var createCornerViaPositions2 = (xSign, ySign) => {
+  const horizontalArm = cornerAxis.flatMap(
+    (x) => armAxis.map((y) => ({ x: x * xSign, y: y * ySign }))
+  );
+  const verticalArm = armAxis.flatMap(
+    (x) => cornerAxis.map((y) => ({ x: x * xSign, y: y * ySign }))
+  );
+  return Array.from(
+    new Map(
+      [...horizontalArm, ...verticalArm].map((point) => [
+        `${point.x},${point.y}`,
+        point
+      ])
+    ).values()
   );
-  return [
-    ...axisPositions.flatMap((x) => [
-      { x, y: -halfSize },
-      { x, y: halfSize }
-    ]),
-    ...axisPositions.slice(1, -1).flatMap((y) => [
-      { x: -halfSize, y },
-      { x: halfSize, y }
-    ])
-  ];
 };
-var CLAD_40X40_VIA_POSITIONS = CLAD_40X40_VIA_RING_HALF_SIZES.flatMap(
-  createSquareViaRingPositions
-);
-var Clad40x40 = ({
+var CLAD_32X32_VIA_POSITIONS = [
+  [-1, -1],
+  [-1, 1],
+  [1, -1],
+  [1, 1]
+].flatMap(([xSign, ySign]) => createCornerViaPositions2(xSign, ySign));
+var Clad32x32 = ({
   children,
   autorouter,
   autorouterOptions,
@@ -15919,35 +15943,35 @@ var Clad40x40 = ({
 }) => /* @__PURE__ */ (0, import_jsx_runtime5.jsxs)(
   "board",
   {
-    name: "Clad40x40",
-    title: "40 mm x 40 mm copper clad",
-    width: `${CLAD_40X40_WIDTH}mm`,
-    height: `${CLAD_40X40_HEIGHT}mm`,
+    name: "Clad32x32",
+    title: "32 mm x 32 mm copper clad",
+    width: `${CLAD_32X32_WIDTH}mm`,
+    height: `${CLAD_32X32_HEIGHT}mm`,
     borderRadius: "1.5mm",
     layers: 2,
     minTraceWidth: `${minTraceWidth ?? 0.15}mm`,
-    minBoardEdgeClearance: `${CLAD_40X40_EDGE_CLEARANCE - CLAD_40X40_EDGE_CLEARANCE_VALIDATION_TOLERANCE}mm`,
+    minBoardEdgeClearance: `${CLAD_32X32_EDGE_CLEARANCE - CLAD_32X32_EDGE_CLEARANCE_VALIDATION_TOLERANCE}mm`,
     minViaHoleDiameter: "0.2mm",
     minViaPadDiameter: "0.4mm",
     autorouter: autorouter ?? createPrefabricatedViaAutorouter({
-      width: CLAD_40X40_WIDTH,
-      height: CLAD_40X40_HEIGHT,
-      edgeClearance: CLAD_40X40_EDGE_CLEARANCE,
+      width: CLAD_32X32_WIDTH,
+      height: CLAD_32X32_HEIGHT,
+      edgeClearance: CLAD_32X32_EDGE_CLEARANCE,
       options: autorouterOptions,
       minimumTraceWidth: minTraceWidth,
       nominalTraceWidth
     }),
     routingDisabled,
     children: [
-      CLAD_40X40_MOUNTING_HOLE_POSITIONS.map((hole) => /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(import_react5.Fragment, { children: /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(
+      CLAD_32X32_MOUNTING_HOLE_POSITIONS.map((hole) => /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(import_react5.Fragment, { children: /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(
         "hole",
         {
           pcbX: hole.x,
           pcbY: hole.y,
-          diameter: `${CLAD_40X40_MOUNTING_HOLE_DIAMETER}mm`
+          diameter: `${CLAD_32X32_MOUNTING_HOLE_DIAMETER}mm`
         }
-      ) }, `clad-40x40-mounting-hole-${hole.x}-${hole.y}`)),
-      CLAD_40X40_VIA_POSITIONS.map((via) => /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(import_react5.Fragment, { children: /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(
+      ) }, `clad-32x32-mounting-hole-${hole.x}-${hole.y}`)),
+      CLAD_32X32_VIA_POSITIONS.map((via) => /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(import_react5.Fragment, { children: /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(
         "via",
         {
           netIsAssignable: true,
@@ -15955,36 +15979,24 @@ var Clad40x40 = ({
           pcbY: via.y,
           fromLayer: "top",
           toLayer: "bottom",
-          holeDiameter: `${CLAD_40X40_VIA_HOLE_DIAMETER}mm`,
-          outerDiameter: `${CLAD_40X40_VIA_PAD_DIAMETER}mm`
+          holeDiameter: `${CLAD_32X32_VIA_HOLE_DIAMETER}mm`,
+          outerDiameter: `${CLAD_32X32_VIA_PAD_DIAMETER}mm`
         }
-      ) }, `clad-40x40-prefab-via-${via.x}-${via.y}`)),
+      ) }, `clad-32x32-prefab-via-${via.x}-${via.y}`)),
       /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(
         "pcbnotedimension",
         {
-          from: {
-            x: -CLAD_40X40_WIDTH / 2,
-            y: CLAD_40X40_HEIGHT / 2 + 2.5
-          },
-          to: {
-            x: CLAD_40X40_WIDTH / 2,
-            y: CLAD_40X40_HEIGHT / 2 + 2.5
-          },
-          text: `${CLAD_40X40_WIDTH}mm`
+          from: { x: -CLAD_32X32_WIDTH / 2, y: CLAD_32X32_HEIGHT / 2 + 2.5 },
+          to: { x: CLAD_32X32_WIDTH / 2, y: CLAD_32X32_HEIGHT / 2 + 2.5 },
+          text: `${CLAD_32X32_WIDTH}mm`
         }
       ),
       /* @__PURE__ */ (0, import_jsx_runtime5.jsx)(
         "pcbnotedimension",
         {
-          from: {
-            x: CLAD_40X40_WIDTH / 2 + 2.5,
-            y: -CLAD_40X40_HEIGHT / 2
-          },
-          to: {
-            x: CLAD_40X40_WIDTH / 2 + 2.5,
-            y: CLAD_40X40_HEIGHT / 2
-          },
-          text: `${CLAD_40X40_HEIGHT}mm`
+          from: { x: CLAD_32X32_WIDTH / 2 + 2.5, y: -CLAD_32X32_HEIGHT / 2 },
+          to: { x: CLAD_32X32_WIDTH / 2 + 2.5, y: CLAD_32X32_HEIGHT / 2 },
+          text: `${CLAD_32X32_HEIGHT}mm`
         }
       ),
       children
@@ -16529,17 +16541,20 @@ var XiaoCladWithPerforatedPinHeaders = ({
   BoosterPackRightHeader,
   BreadboardClad,
   BreadboardTerminalHeaders,
-  CLAD_40X40_EDGE_MOUNTING_HOLE_INSET,
-  CLAD_40X40_HEIGHT,
-  CLAD_40X40_MOUNTING_HOLE_DIAMETER,
-  CLAD_40X40_MOUNTING_HOLE_POSITIONS,
-  CLAD_40X40_VIA_HOLE_DIAMETER,
-  CLAD_40X40_VIA_PAD_DIAMETER,
-  CLAD_40X40_VIA_POSITIONS,
-  CLAD_40X40_VIA_RING_HALF_SIZES,
-  CLAD_40X40_VIA_SPACING,
-  CLAD_40X40_WIDTH,
-  Clad40x40,
+  CLAD_32X32_EDGE_CONNECTOR_OPENING,
+  CLAD_32X32_HEIGHT,
+  CLAD_32X32_MOUNTING_HOLE_DIAMETER,
+  CLAD_32X32_MOUNTING_HOLE_INSET,
+  CLAD_32X32_MOUNTING_HOLE_POSITIONS,
+  CLAD_32X32_VIA_ARM_INNER_OFFSET,
+  CLAD_32X32_VIA_ARM_OUTER_OFFSET,
+  CLAD_32X32_VIA_ARM_WIDTH,
+  CLAD_32X32_VIA_HOLE_DIAMETER,
+  CLAD_32X32_VIA_PAD_DIAMETER,
+  CLAD_32X32_VIA_POSITIONS,
+  CLAD_32X32_VIA_SPACING,
+  CLAD_32X32_WIDTH,
+  Clad32x32,
   FEATHER_CLAD_HEIGHT,
   FEATHER_CLAD_VIA_HOLE_DIAMETER,
   FEATHER_CLAD_VIA_PAD_DIAMETER,