bireader 3.1.4 → 3.1.6

package/dist/core/BiBase.d.ts

@@ -1,1328 +0,0 @@
-/// <reference types="node" />
-import { BigValue, endian, hexdumpOptions, stringOptions } from '../common.js';
-export declare class BiBase {
-    /**
-     * Endianness of default read.
-     * @type {endian}
-     */
-    endian: endian;
-    /**
-     * Current read byte location.
-     */
-    offset: number;
-    /**
-     * Current read byte's bit location.
-     */
-    bitoffset: number;
-    /**
-     * Size in bytes of the current buffer.
-     */
-    size: number;
-    /**
-     * Size in bits of the current buffer.
-     */
-    sizeB: number;
-    /**
-     * Allows the buffer to extend reading or writing outside of current size
-     */
-    strict: boolean;
-    /**
-     * Console log a hexdump on error.
-     */
-    errorDump: boolean;
-    /**
-     * Current buffer data.
-     * @type {Buffer|Uint8Array|null}
-     */
-    data: Buffer | Uint8Array | null;
-    /**
-     * When the data buffer needs to be extended while strict mode is ``false``, this will be the amount it extends.
-     *
-     * Otherwise it extends just the amount of the next written value.
-     *
-     * This can greatly speed up data writes when large files are being written.
-     *
-     * NOTE: Using ``BiWriter.get`` or ``BiWriter.return`` will now remove all data after the current write position. Use ``BiWriter.data`` to get the full buffer instead.
-     */
-    extendBufferSize: number;
-    fd: any;
-    filePath: string;
-    fsMode: string;
-    /**
-     * The settings that used when using the .str getter / setter
-     */
-    private strDefaults;
-    maxFileSize: number | null;
-    constructor();
-    /**
-     * Settings for when using .str
-     *
-     * @param {stringOptions} settings options to use with .str
-     */
-    set strSettings(settings: stringOptions);
-    /**
-     * Enables expanding in reader (changes strict)
-     *
-     * @param {boolean} mode - Enable expanding in reader (changes strict)
-     */
-    writeMode(mode: boolean): void;
-    /**
-     * Dummy function, not needed on Non-Stream
-     */
-    open(): number;
-    /**
-     * Dummy function, not needed on Non-Stream
-     */
-    updateSize(): void;
-    /**
-     * removes data.
-     */
-    close(): void;
-    /**
-     * Dummy function, not needed on Non-Stream
-     */
-    read(start: number, length: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Dummy function, not needed on Non-Stream
-     */
-    write(start: number, data: Buffer, consume?: boolean): number;
-    /**
-     * Dummy function, not needed on Non-Stream
-     */
-    commit(consume?: boolean): number;
-    extendArray(to_padd: number): void;
-    isBufferOrUint8Array(obj: Buffer | Uint8Array): boolean;
-    /**
-     *
-     * Change endian, defaults to little.
-     *
-     * Can be changed at any time, doesn't loose position.
-     *
-     * @param {endian} endian - endianness ``big`` or ``little``
-     */
-    endianness(endian: endian): void;
-    /**
-     * Sets endian to big.
-     */
-    bigEndian(): void;
-    /**
-     * Sets endian to big.
-     */
-    big(): void;
-    /**
-     * Sets endian to big.
-     */
-    be(): void;
-    /**
-     * Sets endian to little.
-     */
-    littleEndian(): void;
-    /**
-     * Sets endian to little.
-     */
-    little(): void;
-    /**
-     * Sets endian to little.
-     */
-    le(): void;
-    /**
-     * Size in bytes of the current buffer.
-     *
-     * @returns {number} size
-     */
-    get length(): number;
-    /**
-     * Size in bytes of the current buffer.
-     *
-     * @returns {number} size
-     */
-    get len(): number;
-    /**
-     * Size in bytes of the current buffer.
-     *
-     * @returns {number} size
-     */
-    get FileSize(): number;
-    /**
-     * Size in bits of the current buffer.
-     *
-     * @returns {number} size
-     */
-    get lengthB(): number;
-    /**
-     * Size in bits of the current buffer.
-     *
-     * @returns {number} size
-     */
-    get FileSizeB(): number;
-    /**
-     * Size in bits of the current buffer.
-     *
-     * @returns {number} size
-     */
-    get lenb(): number;
-    /**
-     * Get the current byte position.
-     *
-     * @return {number} current byte position
-     */
-    get tell(): number;
-    /**
-     * Get the current byte position.
-     *
-     * @return {number} current byte position
-     */
-    get FTell(): number;
-    /**
-     * Get the current byte position.
-     *
-     * @return {number} current byte position
-     */
-    get getOffset(): number;
-    /**
-     * Get the current byte position;
-     *
-     * @return {number} current byte position
-     */
-    get saveOffset(): number;
-    /**
-     * Get the current byte position;
-     *
-     * @return {number} current byte position
-     */
-    get off(): number;
-    /**
-     * Get the current bit position (0-7).
-     *
-     * @return {number} current bit position
-     */
-    get getOffsetBit(): number;
-    /**
-     * Get the current bit position (0-7).
-     *
-     * @return {number} current bit position
-     */
-    get tellB(): number;
-    /**
-     * Get the current bit position (0-7).
-     *
-     * @return {number} current bit position
-     */
-    get FTellB(): number;
-    /**
-     * Get the current bit position (0-7).
-     *
-     * @return {number} current bit position
-     */
-    get offb(): number;
-    /**
-     * Get the current absolute bit position (from start of data).
-     *
-     * @return {number} current absolute bit position
-     */
-    get getOffsetAbsBit(): number;
-    /**
-     * Get the current absolute bit position (from start of data).
-     *
-     * @return {number} current bit position
-     */
-    get saveOffsetAbsBit(): number;
-    /**
-     * Get the current absolute bit position (from start of data).
-     *
-     * @return {number} current absolute bit position
-     */
-    get tellAbsB(): number;
-    /**
-     * Get the current absolute bit position (from start of data).
-     *
-     * @return {number} current absolute bit position
-     */
-    get saveOffsetBit(): number;
-    /**
-     * Get the current absolute bit position (from start of data).
-     *
-     * @return {number} current absolute bit position
-     */
-    get offab(): number;
-    /**
-     * Size in bytes of current read position to the end
-     *
-     * @returns {number} size
-     */
-    get remain(): number;
-    /**
-     * Size in bytes of current read position to the end
-     *
-     * @returns {number} size
-     */
-    get FEoF(): number;
-    /**
-     * Size in bits of current read position to the end
-     *
-     * @returns {number} size
-     */
-    get remainB(): number;
-    /**
-     * Size in bits of current read position to the end
-     *
-     * @returns {number} size
-     */
-    get FEoFB(): number;
-    /**
-     * Row line of the file (16 bytes per row).
-     *
-     * @returns {number} size
-     */
-    get getLine(): number;
-    /**
-     * Row line of the file (16 bytes per row).
-     *
-     * @returns {number} size
-     */
-    get row(): number;
-    /**
-     * Returns current data.
-     *
-     * Note: Will remove all data after current position if ``extendBufferSize`` was set.
-     *
-     * Use ``.data`` instead if you want the full buffer data.
-     *
-     * @returns {Buffer|Uint8Array} ``Buffer`` or ``Uint8Array``
-     */
-    get get(): Buffer | Uint8Array;
-    /**
-     * Returns current data.
-     *
-     * Note: Will remove all data after current position if ``extendBufferSize`` was set.
-     *
-     * Use ``.data`` instead if you want the full buffer data.
-     *
-     * @returns {Buffer|Uint8Array} ``Buffer`` or ``Uint8Array``
-     */
-    get return(): Buffer | Uint8Array;
-    /**
-    * Creates hex dump string. Will console log or return string if set in options.
-    *
-    * @param {object} options
-    * @param {hexdumpOptions?} options - hex dump options
-    * @param {number?} options.length - number of bytes to log, default ``192`` or end of data
-    * @param {number?} options.startByte - byte to start dump (default ``0``)
-    * @param {boolean?} options.supressUnicode - Supress unicode character preview for even columns.
-    * @param {boolean?} options.returnString - Returns the hex dump string instead of logging it.
-    */
-    hexdump(options?: hexdumpOptions): void | string;
-    /**
-     * Turn hexdump on error off (default on).
-     */
-    errorDumpOff(): void;
-    /**
-     * Turn hexdump on error on (default on).
-     */
-    errorDumpOn(): void;
-    /**
-     * Disallows extending data if position is outside of max size.
-     */
-    restrict(): void;
-    /**
-     * Allows extending data if position is outside of max size.
-     */
-    unrestrict(): void;
-    /**
-     * removes data.
-     */
-    end(): void;
-    /**
-     * removes data.
-     */
-    done(): void;
-    /**
-     * removes data.
-     */
-    finished(): void;
-    /**
-     * Searches for byte position of string from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {string} string - String to search for.
-     */
-    findString(string: string): number;
-    /**
-     * Searches for byte value (can be signed or unsigned) position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {number} value - Number to search for.
-     * @param {boolean} unsigned - If the number is unsigned (default true)
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findByte(value: number, unsigned?: boolean, endian?: endian): number;
-    /**
-     * Searches for short value (can be signed or unsigned) position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {number} value - Number to search for.
-     * @param {boolean} unsigned - If the number is unsigned (default true)
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findShort(value: number, unsigned?: boolean, endian?: endian): number;
-    /**
-     * Searches for integer value (can be signed or unsigned) position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {number} value - Number to search for.
-     * @param {boolean} unsigned - If the number is unsigned (default true)
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findInt(value: number, unsigned?: boolean, endian?: endian): number;
-    /**
-     * Searches for 64 bit value (can be signed or unsigned) position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {BigValue} value - Number to search for.
-     * @param {boolean} unsigned - If the number is unsigned (default true)
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findInt64(value: BigValue, unsigned?: boolean, endian?: endian): number;
-    /**
-     * Searches for half float value position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {number} value - Number to search for.
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findHalfFloat(value: number, endian?: endian): number;
-    /**
-     * Searches for float value position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {number} value - Number to search for.
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findFloat(value: number, endian?: endian): number;
-    /**
-     * Searches for double float value position from current read position.
-     *
-     * Returns -1 if not found.
-     *
-     * Does not change current read position.
-     *
-     * @param {number} value - Number to search for.
-     * @param {endian} endian - endianness of value (default set endian).
-     */
-    findDoubleFloat(value: number, endian?: endian): number;
-    /**
-     * Aligns current byte position.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} number - Byte to align
-     */
-    align(number: number): void;
-    /**
-     * Reverse aligns current byte position.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} number - Byte to align
-     */
-    alignRev(number: number): void;
-    /**
-     * Offset current byte or bit position.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} bytes - Bytes to skip
-     * @param {number} bits - Bits to skip
-     */
-    skip(bytes: number, bits?: number): void;
-    /**
-    * Offset current byte or bit position.
-    *
-    * Note: Will extend array if strict mode is off and outside of max size.
-    *
-    * @param {number} bytes - Bytes to skip
-    * @param {number} bits - Bits to skip
-    */
-    jump(bytes: number, bits?: number): void;
-    /**
-     * Change position directly to address.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} byte - byte to set to
-     * @param {number} bit - bit to set to
-     */
-    FSeek(byte: number, bit?: number): void;
-    /**
-     * Offset current byte or bit position.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} bytes - Bytes to skip
-     * @param {number} bits - Bits to skip
-     */
-    seek(bytes: number, bits?: number): void;
-    /**
-     * Change position directly to address.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} byte - byte to set to
-     * @param {number} bit - bit to set to
-     */
-    goto(byte: number, bit?: number): void;
-    /**
-     * Change position directly to address.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} byte - byte to set to
-     * @param {number} bit - bit to set to
-     */
-    pointer(byte: number, bit?: number): void;
-    /**
-     * Change position directly to address.
-     *
-     * Note: Will extend array if strict mode is off and outside of max size.
-     *
-     * @param {number} byte - byte to set to
-     * @param {number} bit - bit to set to
-     */
-    warp(byte: number, bit?: number): void;
-    /**
-     * Set byte and bit position to start of data.
-     */
-    rewind(): void;
-    /**
-     * Set byte and bit position to start of data.
-     */
-    gotoStart(): void;
-    /**
-     * Set current byte and bit position to end of data.
-     */
-    last(): void;
-    /**
-     * Set current byte and bit position to end of data.
-     */
-    gotoEnd(): void;
-    /**
-     * Set byte and bit position to start of data.
-     */
-    EoF(): void;
-    /**
-     * Deletes part of data from start to current byte position unless supplied, returns removed.
-     *
-     * Note: Errors in strict mode.
-     *
-     * @param {number} startOffset - Start location (default 0)
-     * @param {number} endOffset - End location (default current position)
-     * @param {boolean} consume - Move position to end of removed data (default false)
-     * @returns {Buffer|Uint8Array} Removed data as ``Buffer`` or ``Uint8Array``
-     */
-    delete(startOffset?: number, endOffset?: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Deletes part of data from current byte position to end, returns removed.
-     *
-     * Note: Errors in strict mode.
-     *
-     * @returns {Buffer|Uint8Array} Removed data as ``Buffer`` or ``Uint8Array``
-     */
-    clip(): Buffer | Uint8Array;
-    /**
-     * Deletes part of data from current byte position to end, returns removed.
-     *
-     * Note: Errors in strict mode.
-     *
-     * @returns {Buffer|Uint8Array} Removed data as ``Buffer`` or ``Uint8Array``
-     */
-    trim(): Buffer | Uint8Array;
-    /**
-     * Deletes part of data from current byte position to supplied length, returns removed.
-     *
-     * Note: Errors in strict mode.
-     *
-     * @param {number} length - Length of data in bytes to remove
-     * @param {boolean} consume - Move position to end of removed data (default false)
-     * @returns {Buffer|Uint8Array} Removed data as ``Buffer`` or ``Uint8Array``
-     */
-    crop(length: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Deletes part of data from current position to supplied length, returns removed.
-     *
-     * Note: Only works in strict mode.
-     *
-     * @param {number} length - Length of data in bytes to remove
-     * @param {boolean} consume - Move position to end of removed data (default false)
-     * @returns {Buffer|Uint8Array} Removed data as ``Buffer`` or ``Uint8Array``
-     */
-    drop(length: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Replaces data in data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to replace in data
-     * @param {boolean} consume - Move current byte position to end of data (default false)
-     * @param {number} offset - Offset to add it at (defaults to current position)
-     */
-    replace(data: Buffer | Uint8Array, consume?: boolean, offset?: number): void;
-    /**
-     * Replaces data in data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to replace in data
-     * @param {boolean} consume - Move current byte position to end of data (default false)
-     * @param {number} offset - Offset to add it at (defaults to current position)
-     */
-    overwrite(data: Buffer | Uint8Array, consume?: boolean, offset?: number): void;
-    /**
-     * Returns part of data from current byte position to end of data unless supplied.
-     *
-     * @param {number} startOffset - Start location (default current position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move position to end of lifted data (default false)
-     * @param {number} fillValue - Byte value to to fill returned data (does NOT fill unless supplied)
-     * @returns {Buffer|Uint8Array} Selected data as ``Uint8Array`` or ``Buffer``
-     */
-    lift(startOffset?: number, endOffset?: number, consume?: boolean, fillValue?: number): Buffer | Uint8Array;
-    /**
-     * Returns part of data from current byte position to end of data unless supplied.
-     *
-     * @param {number} startOffset - Start location (default current position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move position to end of lifted data (default false)
-     * @param {number} fillValue - Byte value to to fill returned data (does NOT fill unless supplied)
-     * @returns {Buffer|Uint8Array} Selected data as ``Uint8Array`` or ``Buffer``
-     */
-    fill(startOffset?: number, endOffset?: number, consume?: boolean, fillValue?: number): Buffer | Uint8Array;
-    /**
-     * Extract data from current position to length supplied.
-     *
-     * Note: Does not affect supplied data.
-     *
-     * @param {number} length - Length of data in bytes to copy from current offset
-     * @param {number} consume - Moves offset to end of length
-     * @returns {Buffer|Uint8Array} Selected data as ``Uint8Array`` or ``Buffer``
-     */
-    extract(length: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Extract data from current position to length supplied.
-     *
-     * Note: Does not affect supplied data.
-     *
-     * @param {number} length - Length of data in bytes to copy from current offset
-     * @param {number} consume - Moves offset to end of length
-     * @returns {Buffer|Uint8Array} Selected data as ``Uint8Array`` or ``Buffer``
-     */
-    slice(length: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Extract data from current position to length supplied.
-     *
-     * Note: Does not affect supplied data.
-     *
-     * @param {number} length - Length of data in bytes to copy from current offset
-     * @param {number} consume - Moves offset to end of length
-     * @returns {Buffer|Uint8Array} Selected data as ``Uint8Array`` or ``Buffer``
-     */
-    wrap(length: number, consume?: boolean): Buffer | Uint8Array;
-    /**
-     * Inserts data into data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to add to data
-     * @param {boolean} consume - Move current byte position to end of data (default false)
-     * @param {number} offset - Byte position to add at (defaults to current position)
-     */
-    insert(data: Buffer | Uint8Array, consume?: boolean, offset?: number): void;
-    /**
-     * Inserts data into data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to add to data
-     * @param {boolean} consume - Move current byte position to end of data (default false)
-     * @param {number} offset - Byte position to add at (defaults to current position)
-     */
-    place(data: Buffer | Uint8Array, consume?: boolean, offset?: number): void;
-    /**
-     * Adds data to start of supplied data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to add to data
-     * @param {boolean} consume - Move current write position to end of data (default false)
-     */
-    unshift(data: Buffer | Uint8Array, consume?: boolean): void;
-    /**
-     * Adds data to start of supplied data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to add to data
-     * @param {boolean} consume - Move current write position to end of data (default false)
-     */
-    prepend(data: Buffer | Uint8Array, consume?: boolean): void;
-    /**
-     * Adds data to end of supplied data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to add to data
-     * @param {boolean} consume - Move current write position to end of data (default false)
-     */
-    push(data: Buffer | Uint8Array, consume?: boolean): void;
-    /**
-     * Adds data to end of supplied data.
-     *
-     * Note: Errors on strict mode.
-     *
-     * @param {Buffer|Uint8Array} data - ``Uint8Array`` or ``Buffer`` to add to data
-     * @param {boolean} consume - Move current write position to end of data (default false)
-     */
-    append(data: Buffer | Uint8Array, consume?: boolean): void;
-    /**
-     * XOR data.
-     *
-     * @param {number|string|Uint8Array|Buffer} xorKey - Value, string or array to XOR
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    xor(xorKey: number | string | Uint8Array | Buffer, startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * XOR data.
-     *
-     * @param {number|string|Uint8Array|Buffer} xorKey - Value, string or array to XOR
-     * @param {number} length - Length in bytes to XOR from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    xorThis(xorKey: number | string | Uint8Array | Buffer, length?: number, consume?: boolean): void;
-    /**
-     * OR data
-     *
-     * @param {number|string|Uint8Array|Buffer} orKey - Value, string or array to OR
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    or(orKey: number | string | Uint8Array | Buffer, startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * OR data.
-     *
-     * @param {number|string|Uint8Array|Buffer} orKey - Value, string or array to OR
-     * @param {number} length - Length in bytes to OR from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    orThis(orKey: number | string | Uint8Array | Buffer, length?: number, consume?: boolean): void;
-    /**
-     * AND data.
-     *
-     * @param {number|string|Array<number>|Buffer} andKey - Value, string or array to AND
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    and(andKey: number | string | Array<number> | Buffer, startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * AND data.
-     *
-     * @param {number|string|Array<number>|Buffer} andKey - Value, string or array to AND
-     * @param {number} length - Length in bytes to AND from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    andThis(andKey: number | string | Array<number> | Buffer, length?: number, consume?: boolean): void;
-    /**
-     * Add value to data.
-     *
-     * @param {number|string|Array<number>|Buffer} addKey - Value, string or array to add to data
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    add(addKey: number | string | Array<number> | Buffer, startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * Add value to data.
-     *
-     * @param {number|string|Array<number>|Buffer} addKey - Value, string or array to add to data
-     * @param {number} length - Length in bytes to add from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    addThis(addKey: number | string | Array<number> | Buffer, length?: number, consume?: boolean): void;
-    /**
-     * Not data.
-     *
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    not(startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * Not data.
-     *
-     * @param {number} length - Length in bytes to NOT from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    notThis(length?: number, consume?: boolean): void;
-    /**
-     * Left shift data.
-     *
-     * @param {number|string|Array<number>|Buffer} shiftKey - Value, string or array to left shift data
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    lShift(shiftKey: number | string | Array<number> | Buffer, startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * Left shift data.
-     *
-     * @param {number|string|Array<number>|Buffer} shiftKey - Value, string or array to left shift data
-     * @param {number} length - Length in bytes to left shift from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    lShiftThis(shiftKey: number | string | Array<number> | Buffer, length?: number, consume?: boolean): void;
-    /**
-     * Right shift data.
-     *
-     * @param {number|string|Array<number>|Buffer} shiftKey - Value, string or array to right shift data
-     * @param {number} startOffset - Start location (default current byte position)
-     * @param {number} endOffset - End location (default end of data)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    rShift(shiftKey: number | string | Array<number> | Buffer, startOffset?: number, endOffset?: number, consume?: boolean): void;
-    /**
-     * Right shift data.
-     *
-     * @param {number|string|Array<number>|Buffer} shiftKey - Value, string or array to right shift data
-     * @param {number} length - Length in bytes to right shift from curent position (default 1 byte for value, length of string or array for Uint8Array or Buffer)
-     * @param {boolean} consume - Move current position to end of data (default false)
-     */
-    rShiftThis(shiftKey: number | string | Array<number> | Buffer, length?: number, consume?: boolean): void;
-    /**
-     *
-     * Write bits, must have at least value and number of bits.
-     *
-     * ``Note``: When returning to a byte write, remaining bits are skipped.
-     *
-     * @param {number} value - value as int
-     * @param {number} bits - number of bits to write
-     * @param {boolean} unsigned - if value is unsigned
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeBit(value: number, bits: number, unsigned?: boolean, endian?: endian): void;
-    /**
-     * Bit field writer.
-     *
-     * Note: When returning to a byte write, remaining bits are dropped.
-     *
-     * @param {number} value - value as int
-     * @param {number} bits - bits to write
-     * @returns number
-     */
-    writeUBitBE(value: number, bits: number): void;
-    /**
-     * Bit field writer.
-     *
-     * Note: When returning to a byte write, remaining bits are dropped.
-     *
-     * @param {number} value - value as int
-     * @param {number} bits - bits to write
-     * @param {boolean} unsigned - if the value is unsigned
-     * @returns number
-     */
-    writeBitBE(value: number, bits: number, unsigned?: boolean): void;
-    /**
-     * Bit field writer.
-     *
-     * Note: When returning to a byte write, remaining bits are dropped.
-     *
-     * @param {number} value - value as int
-     * @param {number} bits - bits to write
-     * @returns number
-     */
-    writeUBitLE(value: number, bits: number): void;
-    /**
-     * Bit field writer.
-     *
-     * Note: When returning to a byte write, remaining bits are dropped.
-     *
-     * @param {number} value - value as int
-     * @param {number} bits - bits to write
-     * @param {boolean} unsigned - if the value is unsigned
-     * @returns number
-     */
-    writeBitLE(value: number, bits: number, unsigned?: boolean): void;
-    /**
-     * Bit field reader.
-     *
-     * Note: When returning to a byte read, remaining bits are dropped.
-     *
-     * @param {number} bits - bits to read
-     * @param {boolean} unsigned - if the value is unsigned
-     * @param {endian} endian - ``big`` or ``little``
-     * @returns {number}
-     */
-    readBit(bits?: number, unsigned?: boolean, endian?: endian): number;
-    /**
-     * Bit field reader.
-     *
-     * Note: When returning to a byte read, remaining bits are dropped.
-     *
-     * @param {number} bits - bits to read
-     * @returns {number}
-     */
-    readUBitBE(bits: number): number;
-    /**
-     * Bit field reader.
-     *
-     * Note: When returning to a byte read, remaining bits are dropped.
-     *
-     * @param {number} bits - bits to read
-     * @param {boolean} unsigned - if the value is unsigned
-     * @returns {number}
-     */
-    readBitBE(bits: number, unsigned?: boolean): number;
-    /**
-     * Bit field reader.
-     *
-     * Note: When returning to a byte read, remaining bits are dropped.
-     *
-     * @param {number} bits - bits to read
-     * @returns {number}
-     */
-    readUBitLE(bits: number): number;
-    /**
-     * Bit field reader.
-     *
-     * Note: When returning to a byte read, remaining bits are dropped.
-     *
-     * @param {number} bits - bits to read
-     * @param {boolean} unsigned - if the value is unsigned
-     * @returns {number}
-     */
-    readBitLE(bits: number, unsigned?: boolean): number;
-    /**
-     * Read byte.
-     *
-     * @param {boolean} unsigned - if value is unsigned or not
-     * @returns {number}
-     */
-    readByte(unsigned?: boolean): number;
-    /**
-     * Read multiple bytes.
-     *
-     * @param {number} amount - amount of bytes to read
-     * @param {boolean} unsigned - if value is unsigned or not
-     * @returns {number[]}
-     */
-    readBytes(amount: number, unsigned?: boolean): number[];
-    /**
-     * Write byte.
-     *
-     * @param {number} value - value as int
-     * @param {boolean} unsigned - if the value is unsigned
-     */
-    writeByte(value: number, unsigned?: boolean): void;
-    /**
-     * Write multiple bytes.
-     *
-     * @param {number[]} values - array of values as int
-     * @param {boolean} unsigned - if the value is unsigned
-     */
-    writeBytes(values: number[], unsigned?: boolean): void;
-    /**
-     * Write unsigned byte.
-     *
-     * @param {number} value - value as int
-     */
-    writeUByte(value: number): void;
-    /**
-     * Read unsigned byte.
-     *
-     * @returns {number}
-     */
-    readUByte(): number;
-    /**
-     * Read short.
-     *
-     * @param {boolean} unsigned - if value is unsigned or not
-     * @param {endian} endian - ``big`` or ``little``
-     * @returns {number}
-     */
-    readInt16(unsigned?: boolean, endian?: endian): number;
-    /**
-     * Write int16.
-     *
-     * @param {number} value - value as int
-     * @param {boolean} unsigned - if the value is unsigned
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeInt16(value: number, unsigned?: boolean, endian?: endian): void;
-    /**
-     * Write unsigned int16.
-     *
-     * @param {number} value - value as int
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeUInt16(value: number, endian?: endian): void;
-    /**
-     * Write unsigned int16.
-     *
-     * @param {number} value - value as int
-     */
-    writeUInt16BE(value: number): void;
-    /**
-     * Write unsigned int16.
-     *
-     * @param {number} value - value as int
-     */
-    writeUInt16LE(value: number): void;
-    /**
-     * Write signed int16.
-     *
-     * @param {number} value - value as int
-     */
-    writeInt16LE(value: number): void;
-    /**
-     * Read unsigned short.
-     *
-     * @param {endian} endian - ``big`` or ``little``
-     *
-     * @returns {number}
-     */
-    readUInt16(endian?: endian): number;
-    /**
-     * Read unsigned short in little endian.
-     *
-     * @returns {number}
-     */
-    readUInt16LE(): number;
-    /**
-     * Read signed short in little endian.
-     *
-     * @returns {number}
-     */
-    readInt16LE(): number;
-    /**
-     * Read unsigned short in big endian.
-     *
-     * @returns {number}
-     */
-    readUInt16BE(): number;
-    /**
-    * Read signed short in big endian.
-    *
-    * @returns {number}
-    */
-    readInt16BE(): number;
-    /**
-     * Read half float.
-     *
-     * @param {endian} endian - ``big`` or ``little``
-     * @returns {number}
-     */
-    readHalfFloat(endian?: endian): number;
-    /**
-     * Writes half float.
-     *
-     * @param {number} value - value as int
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeHalfFloat(value: number, endian?: endian): void;
-    /**
-     * Writes half float.
-     *
-     * @param {number} value - value as int
-     */
-    writeHalfFloatBE(value: number): void;
-    /**
-     * Writes half float.
-     *
-     * @param {number} value - value as int
-     */
-    writeHalfFloatLE(value: number): void;
-    /**
-    * Read half float.
-    *
-    * @returns {number}
-    */
-    readHalfFloatBE(): number;
-    /**
-     * Read half float.
-     *
-     * @returns {number}
-     */
-    readHalfFloatLE(): number;
-    /**
-     * Read 32 bit integer.
-     *
-     * @param {boolean} unsigned - if value is unsigned or not
-     * @param {endian} endian - ``big`` or ``little``
-     * @returns {number}
-     */
-    readInt32(unsigned?: boolean, endian?: endian): number;
-    /**
-     * Write int32.
-     *
-     * @param {number} value - value as int
-     * @param {boolean} unsigned - if the value is unsigned
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeInt32(value: number, unsigned?: boolean, endian?: endian): void;
-    /**
-     * Write unsigned int32.
-     *
-     * @param {number} value - value as int
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeUInt32(value: number, endian?: endian): void;
-    /**
-     * Write signed int32.
-     *
-     * @param {number} value - value as int
-     */
-    writeInt32LE(value: number): void;
-    /**
-     * Write unsigned int32.
-     *
-     * @param {number} value - value as int
-     */
-    writeUInt32LE(value: number): void;
-    /**
-     * Write signed int32.
-     *
-     * @param {number} value - value as int
-     */
-    writeInt32BE(value: number): void;
-    /**
-     * Read signed 32 bit integer.
-     *
-     * @returns {number}
-     */
-    readInt32BE(): number;
-    /**
-     * Read unsigned 32 bit integer.
-     *
-     * @returns {number}
-     */
-    readUInt32BE(): number;
-    /**
-     * Read signed 32 bit integer.
-     *
-     * @returns {number}
-     */
-    readInt32LE(): number;
-    /**
-     * Read signed 32 bit integer.
-     *
-     * @returns {number}
-     */
-    readUInt32LE(): number;
-    /**
-     * Read unsigned 32 bit integer.
-     *
-     * @returns {number}
-     */
-    readUInt(): number;
-    /**
-     * Read float.
-     *
-     * @param {endian} endian - ``big`` or ``little``
-     * @returns {number}
-     */
-    readFloat(endian?: endian): number;
-    /**
-     * Write float.
-     *
-     * @param {number} value - value as int
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeFloat(value: number, endian?: endian): void;
-    /**
-     * Write float.
-     *
-     * @param {number} value - value as int
-     */
-    writeFloatLE(value: number): void;
-    /**
-     * Write float.
-     *
-     * @param {number} value - value as int
-     */
-    writeFloatBE(value: number): void;
-    /**
-     * Read float.
-     *
-     * @returns {number}
-     */
-    readFloatBE(): number;
-    /**
-     * Read float.
-     *
-     * @returns {number}
-     */
-    readFloatLE(): number;
-    /**
-     * Read signed 64 bit integer.
-     *
-     * @param {boolean} unsigned - if value is unsigned or not
-     * @param {endian?} endian - ``big`` or ``little``
-     * @returns {bigint}
-     */
-    readInt64(unsigned?: boolean, endian?: endian): bigint;
-    /**
-     * Write 64 bit integer.
-     *
-     * @param {BigValue} value - value as int
-     * @param {boolean} unsigned - if the value is unsigned
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeInt64(value: BigValue, unsigned?: boolean, endian?: endian): void;
-    /**
-     * Write unsigned 64 bit integer.
-     *
-     * @param {BigValue} value - value as int
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeUInt64(value: BigValue, endian?: endian): void;
-    /**
-     * Write signed 64 bit integer.
-     *
-     * @param {BigValue} value - value as int
-     */
-    writeInt64LE(value: BigValue): void;
-    /**
-     * Write unsigned 64 bit integer.
-     *
-     * @param {BigValue} value - value as int
-     */
-    writeUInt64LE(value: BigValue): void;
-    /**
-     * Write signed 64 bit integer.
-     *
-     * @param {BigValue} value - value as int
-     */
-    writeInt64BE(value: BigValue): void;
-    /**
-     * Write unsigned 64 bit integer.
-     *
-     * @param {BigValue} value - value as int
-     */
-    writeUInt64BE(value: BigValue): void;
-    /**
-     * Read unsigned 64 bit integer.
-     *
-     * @returns {bigint}
-     */
-    readUInt64(): bigint;
-    /**
-     * Read signed 64 bit integer.
-     *
-     * @returns {bigint}
-     */
-    readInt64BE(): bigint;
-    /**
-     * Read unsigned 64 bit integer.
-     *
-     * @returns {bigint}
-     */
-    readUInt64BE(): bigint;
-    /**
-     * Read signed 64 bit integer.
-     *
-     * @returns {bigint}
-     */
-    readInt64LE(): bigint;
-    /**
-     * Read unsigned 64 bit integer.
-     *
-     * @returns {bigint}
-     */
-    readUInt64LE(): bigint;
-    /**
-     * Read double float.
-     *
-     * @param {endian} endian - ``big`` or ``little``
-     * @returns {number}
-     */
-    readDoubleFloat(endian?: endian): number;
-    /**
-     * Writes double float.
-     *
-     * @param {number} value - value as int
-     * @param {endian} endian - ``big`` or ``little``
-     */
-    writeDoubleFloat(value: number, endian?: endian): void;
-    /**
-     * Writes double float.
-     *
-     * @param {number} value - value as int
-     */
-    writeDoubleFloatBE(value: number): void;
-    /**
-     * Writes double float.
-     *
-     * @param {number} value - value as int
-     */
-    writeDoubleFloatLE(value: number): void;
-    /**
-     * Read double float.
-     *
-     * @returns {number}
-     */
-    readDoubleFloatBE(): number;
-    /**
-     * Read double float.
-     *
-     * @returns {number}
-     */
-    readDoubleFloatLE(): number;
-    /**
-    * Reads string, use options object for different types.
-    *
-    * @param {stringOptions} options
-    * @param {stringOptions["length"]?} options.length - for fixed length, non-terminate value utf strings
-    * @param {stringOptions["stringType"]?} options.stringType - utf-8, utf-16, pascal or wide-pascal
-    * @param {stringOptions["terminateValue"]?} options.terminateValue - only with stringType: "utf"
-    * @param {stringOptions["lengthReadSize"]?} options.lengthReadSize - for pascal strings. 1, 2 or 4 byte length read size
-    * @param {stringOptions["encoding"]?} options.encoding - TextEncoder accepted types
-    * @param {stringOptions["endian"]?} options.endian - for wide-pascal and utf-16
-    * @return {Promise<string>}
-    */
-    readString(options?: stringOptions): string;
-    /**
-    * Writes string, use options object for different types.
-    *
-    * @param {string} string - text string
-    * @param {stringOptions?} options
-    * @param {stringOptions["length"]?} options.length - for fixed length, non-terminate value utf strings
-    * @param {stringOptions["stringType"]?} options.stringType - utf-8, utf-16, pascal or wide-pascal
-    * @param {stringOptions["terminateValue"]?} options.terminateValue - only with stringType: "utf"
-    * @param {stringOptions["lengthWriteSize"]?} options.lengthWriteSize - for pascal strings. 1, 2 or 4 byte length write size
-    * @param {stringOptions["encoding"]?} options.encoding - TextEncoder accepted types
-    * @param {stringOptions["endian"]?} options.endian - for wide-pascal and utf-16
-    */
-    writeString(string: string, options?: stringOptions): void;
-}