bigpowers 2.83.4 → 2.84.0

package/scripts/hooks/trae/pre-tool-git-guard.sh

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+# story: e70s01
+# scenario: SC-e70s01-P2-02
+# trae hook template — blocks dangerous terminal/git commands (fixed guard logic).
+set -euo pipefail
+
+INPUT=$(cat)
+CMD=$(echo "$INPUT" | jq -r '.tool_input.command // .tool_input.cmd // .command // empty')
+
+if [[ -z "$CMD" ]]; then
+  exit 0
+fi
+
+case "$CMD" in
+  *'git push --force'*|*'git push -f '*|*'reset --hard'*|*'git clean -f'*|*'rm -rf /'*)
+    jq -nc --arg reason "BLOCKED: dangerous command pattern" \
+      '{decision: "block", reason: $reason, hookVersion: "1.0.0"}'
+    exit 0
+    ;;
+esac
+
+exit 0

package/scripts/hooks/trae/settings.example.json

@@ -0,0 +1,16 @@
+{
+  "hooks": {
+    "SessionStart": [
+      {
+        "type": "command",
+        "command": "bash scripts/hooks/trae/pre-tool-git-guard.sh"
+      }
+    ],
+    "UserPromptSubmit": [
+      {
+        "type": "command",
+        "command": "bash scripts/hooks/trae/pre-tool-git-guard.sh"
+      }
+    ]
+  }
+}

package/scripts/hooks/windsurf/HOOKS.md

@@ -0,0 +1,23 @@
+# Windsurf Hook Templates (Wave A)
+
+Shipped under `scripts/hooks/windsurf/` — copy to user config in Wave B.
+
+## Events
+
+- `pre_read_code`
+- `post_read_code`
+- `pre_write_code`
+- `post_write_code`
+- `pre_run_command`
+- `post_run_command`
+- `pre_mcp_tool_use`
+- `post_mcp_tool_use`
+- `pre_user_prompt`
+- `post_cascade_response`
+- `post_cascade_response_with_transcript`
+- `post_setup_worktree`
+
+## Security
+
+Templates use fixed guard logic only — no dynamic eval.
+

package/scripts/hooks/windsurf/hooks-manifest.json

@@ -0,0 +1,19 @@
+{
+  "schema_version": 1,
+  "target": "windsurf",
+  "events_total": 12,
+  "events": [
+    "pre_read_code",
+    "post_read_code",
+    "pre_write_code",
+    "post_write_code",
+    "pre_run_command",
+    "post_run_command",
+    "pre_mcp_tool_use",
+    "post_mcp_tool_use",
+    "pre_user_prompt",
+    "post_cascade_response",
+    "post_cascade_response_with_transcript",
+    "post_setup_worktree"
+  ]
+}

package/scripts/hooks/windsurf/pre-tool-git-guard.sh

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+# story: e73s01
+# scenario: SC-e73s01-P2-02
+# windsurf hook template — blocks dangerous terminal/git commands (fixed guard logic).
+set -euo pipefail
+
+INPUT=$(cat)
+CMD=$(echo "$INPUT" | jq -r '.tool_input.command // .tool_input.cmd // .command // empty')
+
+if [[ -z "$CMD" ]]; then
+  exit 0
+fi
+
+case "$CMD" in
+  *'git push --force'*|*'git push -f '*|*'reset --hard'*|*'git clean -f'*|*'rm -rf /'*)
+    jq -nc --arg reason "BLOCKED: dangerous command pattern" \
+      '{decision: "block", reason: $reason, hookVersion: "1.0.0"}'
+    exit 0
+    ;;
+esac
+
+exit 0

package/scripts/hooks/windsurf/settings.example.json

@@ -0,0 +1,16 @@
+{
+  "hooks": {
+    "pre_read_code": [
+      {
+        "type": "command",
+        "command": "bash scripts/hooks/windsurf/pre-tool-git-guard.sh"
+      }
+    ],
+    "post_read_code": [
+      {
+        "type": "command",
+        "command": "bash scripts/hooks/windsurf/pre-tool-git-guard.sh"
+      }
+    ]
+  }
+}

package/scripts/install.sh

@@ -4,6 +4,15 @@
 # story: e63
 # story: e64s02
 # story: e74s02
+# story: e71s02
+# story: e62s02
+# story: e73s02
+# story: e70s02
+# story: e67s02
+# story: e66s02
+# story: e72s02
+# story: e68s02
+# story: e65s02
 # install.sh — global symlink install for bigpowers skills
 #
 # Supported tools:
@@ -37,6 +46,8 @@ for arg in "$@"; do
   esac
 done
 
+export DRY_RUN
+
 # ── helpers ──────────────────────────────────────────────────────────────────
 
 run() {
@@ -66,379 +77,12 @@ unlink_if_managed() {
   fi
 }
 
-# ── Claude Code ───────────────────────────────────────────────────────────────
-
-CLAUDE_CONFIG_DIR="$HOME/.claude"
-CLAUDE_SKILLS_DIR="$CLAUDE_CONFIG_DIR/skills"
-CLAUDE_HOOKS_DIR="$CLAUDE_CONFIG_DIR/hooks"
-CLAUDE_SETTINGS="$CLAUDE_CONFIG_DIR/settings.json"
-
-install_claude() {
-  echo ""
-  echo "Claude Code → $CLAUDE_SKILLS_DIR/"
-  local count=0
-  for skill_dir in "$SKILLS_ROOT"/*/; do
-    [[ -f "$skill_dir/SKILL.md" ]] || continue
-    local name; name="$(basename "$skill_dir")"
-    link "$skill_dir" "$CLAUDE_SKILLS_DIR/$name"
-    count=$((count + 1))
-  done
-  echo "  $count skills installed"
-
-  echo "Claude Code Hooks → $CLAUDE_HOOKS_DIR/"
-  link "$REPO_ROOT/.gemini/extensions/bigpowers/hooks/session-start" "$CLAUDE_HOOKS_DIR/session-start"
-  link "$REPO_ROOT/.gemini/extensions/bigpowers/hooks/run-hook.cmd" "$CLAUDE_HOOKS_DIR/run-hook.cmd"
-  # story: e60s01 e63 — canonical path is skills/guard-git (not bare guard-git/)
-  link "$REPO_ROOT/skills/guard-git/scripts/block-dangerous-git.sh" "$CLAUDE_HOOKS_DIR/block-dangerous-git.sh"
-  link "$REPO_ROOT/skills/guard-git/scripts/lib" "$CLAUDE_HOOKS_DIR/lib"
-  link "$REPO_ROOT/scripts/hooks/rtk-rewrite.sh" "$CLAUDE_HOOKS_DIR/rtk-rewrite.sh"
-  # story: e45s16
-  chmod +x "$REPO_ROOT/scripts/hooks/rtk-rewrite.sh" 2>/dev/null || true
-
-  if [[ -f "$CLAUDE_SETTINGS" ]]; then
-    echo "  Configuring global hooks in $CLAUDE_SETTINGS..."
-    # Robustly add hooks to settings.json if not already present
-    if command -v jq >/dev/null; then
-      local tmp; tmp=$(mktemp)
-      cat "$CLAUDE_SETTINGS" | jq '
-        .hooks.SessionStart += [{"matcher":"startup|clear|compact","hooks":[{"type":"command","command":"\"'"$CLAUDE_HOOKS_DIR/run-hook.cmd"'\" session-start","async":false}]}] |
-        .hooks.PreToolUse += [{"matcher":"Bash","hooks":[{"type":"command","command":"\"'"$CLAUDE_HOOKS_DIR/block-dangerous-git.sh"'\""}]}] |
-        .hooks.PreToolUse += [{"matcher":"Bash","hooks":[{"type":"command","command":"\"'"$CLAUDE_HOOKS_DIR/rtk-rewrite.sh"'\""}]}] |
-        # deduplicate
-        .hooks.SessionStart |= unique |
-        .hooks.PreToolUse |= unique
-      ' > "$tmp" && run mv "$tmp" "$CLAUDE_SETTINGS"
-    else
-      echo "  WARNING: jq not found. Manual setup required in $CLAUDE_SETTINGS"
-    fi
-  fi
-}
-
-uninstall_claude() {
-  echo ""
-  echo "Claude Code → removing management from $CLAUDE_CONFIG_DIR/"
-  if [[ -d "$CLAUDE_SKILLS_DIR" ]]; then
-    for dst in "$CLAUDE_SKILLS_DIR"/*/; do
-      [[ -L "${dst%/}" ]] || continue
-      unlink_if_managed "${dst%/}" "$REPO_ROOT/"
-    done
-  fi
-  if [[ -d "$CLAUDE_HOOKS_DIR" ]]; then
-    unlink_if_managed "$CLAUDE_HOOKS_DIR/session-start" "$REPO_ROOT/"
-    unlink_if_managed "$CLAUDE_HOOKS_DIR/run-hook.cmd" "$REPO_ROOT/"
-    unlink_if_managed "$CLAUDE_HOOKS_DIR/block-dangerous-git.sh" "$REPO_ROOT/"
-    unlink_if_managed "$CLAUDE_HOOKS_DIR/rtk-rewrite.sh" "$REPO_ROOT/"
-    unlink_if_managed "$CLAUDE_HOOKS_DIR/lib" "$REPO_ROOT/"
-  fi
-}
-
-# ── Gemini CLI (e64s02) ───────────────────────────────────────────────────────
-
-GEMINI_CONFIG_DIR="$HOME/.gemini"
-GEMINI_EXT_SRC="$REPO_ROOT/.gemini/extensions/bigpowers"
-GEMINI_EXT_DST="$GEMINI_CONFIG_DIR/config/plugins/bigpowers"
-GEMINI_HOOKS_SRC="$GEMINI_EXT_SRC/hooks"
-GEMINI_HOOKS_DIR="$GEMINI_CONFIG_DIR/hooks"
-GEMINI_SETTINGS="$GEMINI_CONFIG_DIR/settings.json"
-
-install_gemini() {
-  echo ""
-  echo "Gemini CLI → $GEMINI_EXT_DST"
-  if [[ ! -d "$GEMINI_EXT_SRC" ]]; then
-    echo "  WARNING: $GEMINI_EXT_SRC not found — run sync-skills.sh first"
-    return
-  fi
-  link "$GEMINI_EXT_SRC" "$GEMINI_EXT_DST"
-
-  echo "Gemini CLI Hooks → $GEMINI_HOOKS_DIR/"
-  link "$GEMINI_HOOKS_SRC/session-start" "$GEMINI_HOOKS_DIR/session-start"
-  link "$GEMINI_HOOKS_SRC/run-hook.cmd" "$GEMINI_HOOKS_DIR/run-hook.cmd"
-  link "$GEMINI_HOOKS_SRC/before-tool-git-guard.sh" "$GEMINI_HOOKS_DIR/before-tool-git-guard.sh"
-  link "$GEMINI_HOOKS_SRC/before-tool-rtk.sh" "$GEMINI_HOOKS_DIR/before-tool-rtk.sh"
-  link "$GEMINI_HOOKS_SRC/before-tool-token-mgmt.sh" "$GEMINI_HOOKS_DIR/before-tool-token-mgmt.sh"
-  chmod +x "$GEMINI_HOOKS_SRC/before-tool-git-guard.sh" \
-    "$GEMINI_HOOKS_SRC/before-tool-rtk.sh" \
-    "$GEMINI_HOOKS_SRC/before-tool-token-mgmt.sh" 2>/dev/null || true
-
-  if [[ -f "$GEMINI_SETTINGS" ]]; then
-    echo "  Configuring global hooks in $GEMINI_SETTINGS..."
-    if command -v jq >/dev/null; then
-      local tmp; tmp=$(mktemp)
-      cat "$GEMINI_SETTINGS" | jq '
-        .hooks.SessionStart += [{"matcher":"startup|clear|compact","hooks":[{"type":"command","command":"\"'"$GEMINI_HOOKS_DIR/run-hook.cmd"'\" session-start","async":false}]}] |
-        .hooks.BeforeTool += [{"matcher":"run_shell_command","hooks":[{"name":"git-guardrails","type":"command","command":"GIT_GUARDRAILS_MODE=gemini \"'"$GEMINI_HOOKS_DIR/before-tool-git-guard.sh"'\"","timeout":5000}]}] |
-        .hooks.BeforeTool += [{"matcher":"run_shell_command","hooks":[{"name":"rtk-rewrite","type":"command","command":"\"'"$GEMINI_HOOKS_DIR/before-tool-rtk.sh"'\"","timeout":3000}]}] |
-        .hooks.SessionStart |= unique |
-        .hooks.BeforeTool |= unique
-      ' > "$tmp" && run mv "$tmp" "$GEMINI_SETTINGS"
-    else
-      echo "  WARNING: jq not found. Manual setup required in $GEMINI_SETTINGS"
-      echo "  See $GEMINI_HOOKS_SRC/settings.json.example"
-    fi
-  else
-    echo "  NOTE: $GEMINI_SETTINGS not found — copy $GEMINI_HOOKS_SRC/settings.json.example after first Gemini run"
-  fi
-}
-
-uninstall_gemini() {
-  echo ""
-  echo "Gemini CLI → removing management from $GEMINI_CONFIG_DIR/"
-  unlink_if_managed "$GEMINI_EXT_DST" "$REPO_ROOT/"
-  if [[ -d "$GEMINI_HOOKS_DIR" ]]; then
-    unlink_if_managed "$GEMINI_HOOKS_DIR/session-start" "$REPO_ROOT/"
-    unlink_if_managed "$GEMINI_HOOKS_DIR/run-hook.cmd" "$REPO_ROOT/"
-    unlink_if_managed "$GEMINI_HOOKS_DIR/before-tool-git-guard.sh" "$REPO_ROOT/"
-    unlink_if_managed "$GEMINI_HOOKS_DIR/before-tool-rtk.sh" "$REPO_ROOT/"
-    unlink_if_managed "$GEMINI_HOOKS_DIR/before-tool-token-mgmt.sh" "$REPO_ROOT/"
-  fi
-}
-
-# ── Cursor ────────────────────────────────────────────────────────────────────
-
-CURSOR_RULES_SRC="$REPO_ROOT/.cursor/rules"
-CURSOR_RULES_DST="$HOME/.cursor/rules"
-
-install_cursor() {
-  echo ""
-  echo "Cursor → $CURSOR_RULES_DST"
-  if [[ ! -d "$CURSOR_RULES_SRC" ]]; then
-    echo "  WARNING: $CURSOR_RULES_SRC not found — run sync-skills.sh first"
-    return
-  fi
-  link "$CURSOR_RULES_SRC" "$CURSOR_RULES_DST"
-  echo ""
-  echo "  NOTE: Cursor does not scan ~/.cursor/rules/ globally."
-  echo "  For per-project access, run in your project root:"
-  echo "    ln -sfn $CURSOR_RULES_SRC .cursor/rules"
-}
-
-uninstall_cursor() {
-  echo ""
-  echo "Cursor → removing $CURSOR_RULES_DST"
-  unlink_if_managed "$CURSOR_RULES_DST" "$REPO_ROOT/"
-}
-
-# ── pi ────────────────────────────────────────────────────────────────────────
-
-PI_CONFIG_DIR="$HOME/.pi"
-PI_SKILLS_DIR="$PI_CONFIG_DIR/agent/skills"
-
-install_pi() {
-  echo ""
-  echo "pi → $PI_SKILLS_DIR/"
-  local count=0
-  for skill_dir in "$SKILLS_ROOT"/*/; do
-    [[ -f "$skill_dir/SKILL.md" ]] || continue
-    local name; name="$(basename "$skill_dir")"
-    link "$skill_dir" "$PI_SKILLS_DIR/$name"
-    count=$((count + 1))
-  done
-  echo "  $count skills installed"
-}
-
-uninstall_pi() {
-  echo ""
-  echo "pi → removing management from $PI_CONFIG_DIR/"
-  if [[ -d "$PI_SKILLS_DIR" ]]; then
-    for dst in "$PI_SKILLS_DIR"/*/; do
-      [[ -L "${dst%/}" ]] || continue
-      unlink_if_managed "${dst%/}" "$REPO_ROOT/"
-    done
-  fi
-}
-
-# ── Hermes Agent (e61s02) ─────────────────────────────────────────────────────
-
-HERMES_CONFIG_DIR="$HOME/.hermes"
-HERMES_SKILLS_DIR="$HERMES_CONFIG_DIR/skills"
-HERMES_RENDERED="$REPO_ROOT/.hermes/skills"
-HERMES_CONFIG="$HERMES_CONFIG_DIR/config.yaml"
-HERMES_HOOKS_DIR="$HERMES_CONFIG_DIR/hooks"
-
-install_hermes() {
-  echo ""
-  echo "Hermes Agent → $HERMES_SKILLS_DIR/"
-  if [[ ! -d "$HERMES_RENDERED" ]]; then
-    echo "  WARNING: $HERMES_RENDERED not found — run sync-skills.sh first"
-    return
-  fi
-  local count=0
-  for skill_dir in "$HERMES_RENDERED"/*/; do
-    [[ -f "${skill_dir}SKILL.md" ]] || continue
-    local name; name="$(basename "$skill_dir")"
-    link "$skill_dir" "$HERMES_SKILLS_DIR/$name"
-    count=$((count + 1))
-  done
-  echo "  $count skills installed"
-
-  echo "Hermes Agent → context bridge $HERMES_CONFIG"
-  source "$REPO_ROOT/scripts/lib/context-wire.sh"
-  wire_context_mode config-bridge "$HERMES_CONFIG" "instructions" "AGENTS.md"
-
-  if [[ -d "$REPO_ROOT/scripts/hooks/hermes/gateway/session-log" ]]; then
-    echo "Hermes Agent hook templates → $HERMES_HOOKS_DIR/ (copy paths into config to enable)"
-    link "$REPO_ROOT/scripts/hooks/hermes/gateway/session-log" "$HERMES_HOOKS_DIR/session-log"
-  fi
-}
-
-uninstall_hermes() {
-  echo ""
-  echo "Hermes Agent → removing management from $HERMES_CONFIG_DIR/"
-  if [[ -d "$HERMES_SKILLS_DIR" ]]; then
-    for dst in "$HERMES_SKILLS_DIR"/*/; do
-      [[ -L "${dst%/}" ]] || continue
-      unlink_if_managed "${dst%/}" "$REPO_ROOT/"
-    done
-  fi
-  unlink_if_managed "$HERMES_HOOKS_DIR/session-log" "$REPO_ROOT/"
-}
-
-# ── ZCode (e76s02) ────────────────────────────────────────────────────────────
-
-ZCODE_CONFIG_DIR="$HOME/.zcode"
-ZCODE_SKILLS_DIR="$ZCODE_CONFIG_DIR/skills"
-ZCODE_RENDERED="$REPO_ROOT/.zcode/skills"
-ZCODE_AGENTS="$ZCODE_CONFIG_DIR/AGENTS.md"
-
-install_zcode() {
-  echo ""
-  echo "ZCode → $ZCODE_SKILLS_DIR/"
-  if [[ ! -d "$ZCODE_RENDERED" ]]; then
-    echo "  WARNING: $ZCODE_RENDERED not found — run sync-skills.sh first"
-    return
-  fi
-  local count=0
-  for skill_dir in "$ZCODE_RENDERED"/*/; do
-    [[ -f "${skill_dir}SKILL.md" ]] || continue
-    local name; name="$(basename "$skill_dir")"
-    link "$skill_dir" "$ZCODE_SKILLS_DIR/$name"
-    count=$((count + 1))
-  done
-  echo "  $count skills installed"
-
-  echo "ZCode → context symlink $ZCODE_AGENTS"
-  source "$REPO_ROOT/scripts/lib/context-wire.sh"
-  local zcode_agents_src="$REPO_ROOT/AGENTS.md"
-  [[ -f "$zcode_agents_src" ]] || zcode_agents_src="$REPO_ROOT/docs/templates/AGENTS.md"
-  wire_context_mode symlink "$ZCODE_AGENTS" "" read "$zcode_agents_src"
-}
-
-uninstall_zcode() {
-  echo ""
-  echo "ZCode → removing management from $ZCODE_CONFIG_DIR/"
-  if [[ -d "$ZCODE_SKILLS_DIR" ]]; then
-    for dst in "$ZCODE_SKILLS_DIR"/*/; do
-      [[ -L "${dst%/}" ]] || continue
-      unlink_if_managed "${dst%/}" "$REPO_ROOT/"
-    done
-  fi
-  unlink_if_managed "$ZCODE_AGENTS" "$REPO_ROOT/"
-}
-
-# ── MiMo Code (e69s02) ────────────────────────────────────────────────────────
-
-MIMO_CONFIG_DIR="$HOME/.mimocode"
-MIMO_SKILLS_DIR="$MIMO_CONFIG_DIR/skills"
-MIMO_RENDERED="$REPO_ROOT/.mimocode/skills"
-MIMO_AGENTS="$MIMO_CONFIG_DIR/AGENTS.md"
-
-install_mimo() {
-  echo ""
-  echo "MiMo Code → $MIMO_SKILLS_DIR/"
-  if [[ ! -d "$MIMO_RENDERED" ]]; then
-    echo "  WARNING: $MIMO_RENDERED not found — run sync-skills.sh first"
-    return
-  fi
-  local count=0
-  for skill_dir in "$MIMO_RENDERED"/*/; do
-    [[ -f "${skill_dir}SKILL.md" ]] || continue
-    local name; name="$(basename "$skill_dir")"
-    link "$skill_dir" "$MIMO_SKILLS_DIR/$name"
-    count=$((count + 1))
-  done
-  echo "  $count skills installed"
-
-  echo "MiMo Code → context symlink $MIMO_AGENTS"
-  source "$REPO_ROOT/scripts/lib/context-wire.sh"
-  local mimo_agents_src="$REPO_ROOT/AGENTS.md"
-  [[ -f "$mimo_agents_src" ]] || mimo_agents_src="$REPO_ROOT/docs/templates/AGENTS.md"
-  wire_context_mode symlink "$MIMO_AGENTS" "" read "$mimo_agents_src"
-}
-
-uninstall_mimo() {
-  echo ""
-  echo "MiMo Code → removing management from $MIMO_CONFIG_DIR/"
-  if [[ -d "$MIMO_SKILLS_DIR" ]]; then
-    for dst in "$MIMO_SKILLS_DIR"/*/; do
-      [[ -L "${dst%/}" ]] || continue
-      unlink_if_managed "${dst%/}" "$REPO_ROOT/"
-    done
-  fi
-  unlink_if_managed "$MIMO_AGENTS" "$REPO_ROOT/"
-}
-
-# ── Antigravity CLI / agy (e74s02) ────────────────────────────────────────────
-# Global skills: ~/.gemini/antigravity-cli/skills/ (separate from e64 Gemini extension)
-
-AGY_CONFIG_DIR="$HOME/.gemini/antigravity-cli"
-AGY_SKILLS_DIR="$AGY_CONFIG_DIR/skills"
-AGY_RENDERED="$REPO_ROOT/.agents/skills"
-
-install_agy() {
-  echo ""
-  echo "Antigravity CLI → $AGY_SKILLS_DIR/"
-  if [[ ! -d "$AGY_RENDERED" ]]; then
-    echo "  WARNING: $AGY_RENDERED not found — run sync-skills.sh first"
-    return
-  fi
-  local count=0
-  for skill_dir in "$AGY_RENDERED"/*/; do
-    [[ -f "${skill_dir}SKILL.md" ]] || continue
-    local name; name="$(basename "$skill_dir")"
-    link "$skill_dir" "$AGY_SKILLS_DIR/$name"
-    count=$((count + 1))
-  done
-  echo "  $count skills installed"
-  echo "  NOTE: Antigravity uses ~/.gemini/antigravity-cli/skills/ — not .gemini/extensions/ (Gemini CLI)"
-}
-
-install_antigravity() {
-  install_agy
-}
-
-uninstall_agy() {
-  echo ""
-  echo "Antigravity CLI → removing management from $AGY_CONFIG_DIR/"
-  if [[ -d "$AGY_SKILLS_DIR" ]]; then
-    for dst in "$AGY_SKILLS_DIR"/*/; do
-      [[ -L "${dst%/}" ]] || continue
-      unlink_if_managed "${dst%/}" "$REPO_ROOT/"
-    done
-  fi
-}
-
-uninstall_antigravity() {
-  uninstall_agy
-}
-
-# ── Codex CLI (e37s15) ───────────────────────────────────────────────────────
-
-CODEX_DIR="$HOME/.codex"
-CODEX_AGENTS="$CODEX_DIR/AGENTS.md"
-CODEX_TEMPLATE="$REPO_ROOT/templates/codex/AGENTS.md"
-
-install_codex() {
-  echo ""
-  echo "Codex CLI → $CODEX_AGENTS"
-  [[ -f "$CODEX_TEMPLATE" ]] || { echo "  skip: template missing $CODEX_TEMPLATE" >&2; return 0; }
-  link "$CODEX_TEMPLATE" "$CODEX_AGENTS"
-}
-
-uninstall_codex() {
-  echo ""
-  echo "Codex CLI → removing $CODEX_AGENTS"
-  unlink_if_managed "$CODEX_AGENTS" "$REPO_ROOT/"
-}
+# Per-target install/uninstall functions (extracted for file-size cap)
+_INSTALL_LIB="$(dirname "${BASH_SOURCE[0]}")/lib"
+source "$_INSTALL_LIB/install-targets-a.sh"
+source "$_INSTALL_LIB/install-targets-b.sh"
+source "$_INSTALL_LIB/install-targets-c.sh"
+source "$_INSTALL_LIB/install-targets-d.sh"
 
 # ── main ──────────────────────────────────────────────────────────────────────
 
@@ -456,6 +100,14 @@ if $UNINSTALL; then
   uninstall_agy
   uninstall_cursor
   uninstall_codex
+  uninstall_qwen
+  uninstall_codebuddy
+  uninstall_cline
+  uninstall_kilocode
+  uninstall_trae
+  uninstall_windsurf
+  uninstall_opencode
+  uninstall_copilot
   echo ""
   echo "bigpowers uninstalled."
 else
@@ -468,6 +120,14 @@ else
   install_agy
   install_cursor
   install_codex
+  install_qwen
+  install_codebuddy
+  install_cline
+  install_kilocode
+  install_trae
+  install_windsurf
+  install_opencode
+  install_copilot
   echo ""
   echo "bigpowers installed. Future updates:"
   if [[ -d "$REPO_ROOT/.git" ]]; then

package/scripts/lib/context-wire.sh

@@ -44,6 +44,11 @@ wire_context_mode() {
   local bridge_key="${4:-read}"
   local src="${5:-AGENTS.md}"
 
+  if [[ "${DRY_RUN:-false}" == "true" ]]; then
+    echo "  [dry-run] context-wire: mode=$mode file=${file:-$bridge_file}"
+    return 0
+  fi
+
   case "$mode" in
     native) return 0 ;;
     symlink|copy)

package/scripts/lib/install-grep.sh

@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+# install-grep.sh — grep install.sh plus extracted install-targets-*.sh
+# story: e65s02 (fleet Wave B file-size split)
+
+if [[ -n "${INSTALL_GREP_LOADED:-}" ]]; then return 0; fi
+INSTALL_GREP_LOADED=1
+
+install_grep_paths() {
+  local root="${1:-${REPO_ROOT:-}}"
+  if [[ -z "$root" ]]; then
+    root="$(cd "$(dirname "${BASH_SOURCE[0]}")/../.." && pwd)"
+  fi
+  printf '%s\n' "$root/scripts/install.sh" "$root"/scripts/lib/install-targets-*.sh
+}
+
+install_grep() {
+  grep "$@" $(install_grep_paths)
+}