bfg-common 1.4.59 → 1.4.61

package/assets/localization/local_zh.json

@@ -83,6 +83,7 @@
     "advanced": "先进的",
     "advancedConfiguration": "高级配置",
     "advancedOptions": "高级选项",
+    "advancedPerformance": "高级性能",
     "advancedSystemSettings": "高级系统设置",
     "agentVmSettings": "代理虚拟机设置",
     "alarmActions": "报警动作",
@@ -200,6 +201,7 @@
     "certificateValidTo": "证书有效期至",
     "changeBothComputeResourceStorage": "更改计算和存储",
     "changeComputeResourceOnly": "仅编辑计算资源",
+    "changeCustomInterval": "更改自定义间隔",
     "changeIdentityProvider": "更改身份提供商",
     "changePassword": "更改密码",
     "changePasswordError": "密码错误！",
@@ -210,7 +212,10 @@
     "changesWillNotTakeEffectUntilTheHost": "主機重啟後更改才會生效。",
     "changingGatewayLossConnectBetweenHostVCenter": "更改默认网关可能会导致主机与Sphere Zone之间失去连接。",
     "characterRequirements": "品格要求",
+    "chartMetrics": "图表指标",
+    "chartOptions": "图表选项",
     "chartOptionsName": "图表选项名称",
+    "chartType": "图表类型",
     "chooseGuestOSInstalledVM": "选择要在虚拟机上安装的来宾操作系统",
     "chooseGuestOSInstalledVmAndMachineTypeUsedCreateVm": "选择将安装在虚拟机上的来宾操作系统以及将用于创建虚拟机的机器类型。",
     "chosenDatastoreName": "所选名称表单数据存储",
@@ -306,6 +311,7 @@
     "copyPaste": "复制粘贴",
     "copyTo": "复制到",
     "copyUrl": "复制网址",
+    "corePerSocket": "每个插槽的核心数",
     "coresPerSocket": "每个插座的核心数",
     "counters": "柜台",
     "cpu": "中央处理器",
@@ -315,6 +321,8 @@
     "cpuReady": "CPU 就绪",
     "cpus": "处理器",
     "cpus2": "处理器",
+    "cpuUsageInMhz": "以 MHz 为单位的 CPU 使用率",
+    "cpuUsageInPercent": "以 % 表示的 CPU 使用率",
     "cpuUtilization": "CPU 利用率",
     "create": "创造",
     "createHardDisk": "创建硬盘",
@@ -330,6 +338,7 @@
     "custom": "风俗",
     "customAttributes": "自定义属性",
     "customerImprovementProgram": "客户体验改善计划",
+    "customInterval": "自定义间隔",
     "customizeHardware": "硬件设置",
     "daemon": "守護進程",
     "datacenter": "数据中心",
@@ -345,6 +354,7 @@
     "date": "日期",
     "dateTimeOnHost": "主机上的日期/时间",
     "days": "天",
+    "days2": "天）",
     "dcFolders": "数据中心组",
     "december": "十二月",
     "default": "默认",
@@ -373,6 +383,7 @@
     "deleteGroupDesc": "你确定要删除 {0}? 此操作是永久性的，无法恢复。",
     "deleteGroupMemberDesc": "您确定要从 {group} 中删除用户 {user} 吗？",
     "deleteHostText": "刪除主機 {0} 也會從清單中刪除主機的所有虛擬機。",
+    "deleteOptions": "删除选项",
     "deletePermission": "删除权限",
     "deletePermissionDesc": "您想删除选定的权限吗？",
     "deleteRole": "删除角色",
@@ -485,6 +496,7 @@
     "emailErrorText": "请输入有效的电子邮件地址",
     "embeddedDesc": "嵌入式（集成 Windows 身份验证、基于 LDAP 的 Active Directory、开放 LDAP）",
     "empty": "空的",
+    "emptyAdvancedGraphText": "此条目当前没有性能数据",
     "emptyGraphText": "当前所选指标没有可用的性能数据",
     "emptyNameError": "名称不能为空。",
     "enable": "打开",
@@ -581,6 +593,7 @@
     "freeSpace": "可用空间",
     "friday": "星期五",
     "from": "从",
+    "from2": "从",
     "fullScreenMode": "全屏模式",
     "fullyAutomated": "全自動",
     "function": "功能",
@@ -667,6 +680,7 @@
     "hourFormat12": "12小时制",
     "hourFormat24": "24 小时格式",
     "hours": "小时",
+    "hours2": "小时）",
     "howWouldLikeCreateVirtualMachine": "您想如何创建虚拟机？",
     "hyperthreading": "超线程",
     "hyperthreadingStatus": "超线程状态",
@@ -714,6 +728,7 @@
     "internalName": "内部名称",
     "interoperability": "互操作性",
     "invalidMacAddress": "输入的 MAC 地址无效。",
+    "invalidTimeEntry": "时间输入无效",
     "inventories": "库存",
     "inventoryDesc": "选择将显示在清单树（左面板）中的项目。",
     "ioFilters": "输入/输出过滤器",
@@ -768,9 +783,13 @@
     "last": "最后的",
     "last_file_based_backup": "最新文件备份",
     "last_updated": "最后更新",
+    "lastDay": "最后一天",
     "lastModifiedDate": "最后修改日期",
+    "lastMonth": "上个月",
     "lastName": "姓",
     "lastSyncDate": "上次同步日期",
+    "lastWeek": "上星期",
+    "lastYear": "去年",
     "latest": "最新的",
     "latinCpu": "CPU",
     "launchConsole": "启动控制台",
@@ -798,6 +817,7 @@
     "limitIops": "限制 - IOPs",
     "limitMustBe": "限制必须大于或等于 {0}。",
     "limitMustBeMax": "该限制必须小于或等于 {0}。",
+    "lineGraph": "线形图",
     "linkLayerDiscoveryProtocol": "链路层发现协议",
     "linkStatusOnly": "仅限链接状态",
     "liveResizeOperations": "实时调整大小操作",
@@ -888,6 +908,7 @@
     "memoryUtilization": "内存利用率",
     "message": "信息",
     "method": "方法",
+    "mhz": "兆赫",
     "microsoftAdfs": "微软ADFS",
     "microsoftWindowsServer2019": "Microsoft Windows Server 2019（64 位）",
     "migrate": "迁移",
@@ -910,6 +931,7 @@
     "monday": "周一",
     "monitorHealthCheck": "监控健康检查",
     "monitoring": "监控",
+    "months2": "月份",
     "more": "是，他",
     "moreInfo": "更多信息",
     "moreInformation": "附加信息",
@@ -1006,6 +1028,7 @@
     "noAssociatedPortGroups": "没有关联的端口组",
     "noCertificatesAdded": "未添加证书。",
     "noConfigurableDeviceIsSelected": "未选择可配置设备。",
+    "noCountersSelected": "未选择计数器",
     "noDataProvided": "没有提供资料",
     "noDhcpEnabledVmKernelNetAdapters": "没有启用DHCP的VMkernel网络适配器。",
     "noFreeNetworkAdaptersAddSwitch": "没有免费的网络适配器可以添加到交换机上。",
@@ -1014,6 +1037,7 @@
     "none": "没有什么",
     "noNetworkSelected": "未选择网络。",
     "nonpersistent": "善变的",
+    "noPerformanceDataIsAvailableForTheCurrentlySelectedMetrics": "当前所选指标没有可用的性能数据",
     "noPhysicalNetworkAdapters": "没有物理网络适配器",
     "noPrivilegesAssigned": "没有分配权限",
     "normal": "普通的",
@@ -1050,6 +1074,7 @@
     "offlineOps": "离线操作",
     "ok": "好的",
     "okOrCancelToReviewYourChanges": "单击\"确定\"继续或\"取消\"以查看更改。",
+    "oneOfSelectedDatesIsInTheFuture": "指定的时间范围无效。 选定的日期之一是未来的日期。",
     "opaqueNetwork": "不透明网络",
     "openId": "开放ID",
     "openidAddress": "OpenID 地址",
@@ -1068,6 +1093,7 @@
     "overallHealth": "总体健康",
     "override": "覆盖",
     "overrideDefaultGatewayForThisAdapter": "覆盖该适配器的默认网关",
+    "overview": "概述",
     "overview2": "概述",
     "owner": "所有者",
     "packages": "套餐",
@@ -1105,10 +1131,12 @@
     "peakInvalidError": "峰值带宽必须是一个正的整数。",
     "perenniallyReserved": "常年保留",
     "performance": "表现",
+    "performanceChartLegend": "性能图表图例",
     "performanceCounters": "性能计数器",
     "performanceOptimization": "性能优化",
     "performanceOverview": "业绩概览",
     "performanceSummaryLastHour": "上一小时业绩汇总",
+    "period": "时期",
     "permissionsProvider": "密钥令牌持有者的最长生",
     "persistent": "执着的",
     "persistentMemory": "持久内存",
@@ -1182,6 +1210,7 @@
     "range": "范围",
     "readyComplete": "准备完成",
     "readyCompleteDesc": "在完成向导之前检查您的选择",
+    "realTime": "即时的",
     "reboot": "重新加载",
     "rebootNodeApplyChanges": "重新启动节点以应用更改。",
     "recommendations": "建议",
@@ -1243,6 +1272,7 @@
     "restartLoadBasedTeamingDaemonService": "重启 Load-Based Teaming Daemon 服务",
     "restartTheService": "重啟服務",
     "restrictReuse": "限制重复使用",
+    "retrievingData": "检索数据",
     "returnFileBrowser": "返回文件浏览器",
     "returnSearchResults": "返回搜索结果",
     "reversePolicy": "反向政策",
@@ -1269,6 +1299,7 @@
     "sata": "萨塔",
     "saturday": "周六",
     "save": "节省",
+    "saveOptionsAs": "将选项另存为",
     "scanForNewStorage": "扫描新的存储设备",
     "scanForNewStorageDesc": "重新扫描所有主机总线适配器以查找新的存储设备。",
     "scanForNewVmsVolumes": "扫描新的 VMFS 卷",
@@ -1303,6 +1334,7 @@
     "selectConfiguration": "选择配置",
     "selectConnectionType": "选择连接类型",
     "selectConnectionTypeToCreate": "选择要创建的连接类型。",
+    "selectCountersForThisChart": "选择此图表的计数器",
     "selectCreationType": "选择创建类型",
     "selectDatastoreClusterDatastore": "选择数据仓库集群或数据仓库",
     "selectDatastoreName": "Select a name",
@@ -1330,6 +1362,8 @@
     "selectNameFolder": "选择名称和文件夹",
     "selectNetwork": "选择网络",
     "selectNfsVersion": "选择 NFS 版本。",
+    "selectObjectForChart": "选择此图表的对象",
+    "selectOption": "选择选项",
     "selectPhysicalNetworkAdapterFromListToViewItsDetails": "从列表中选择一个物理网络适配器，查看其详细信息。",
     "selectStorage": "选择存储",
     "selectStorageConfigurationDiskFiles": "为配置文件和磁盘选择存储",
@@ -1390,6 +1424,7 @@
     "space": "空间",
     "spaceReclamationGranularity": "空间回收粒度",
     "spaceReclamationPriority": "空间回收优先级",
+    "spaceUtilization": "空间利用",
     "specialCharacters": "特殊字符",
     "specificDomainControllers": "特定域控制器",
     "specifyContentLibraryNameAndLocation": "指定内容库名称和位置。",
@@ -1408,6 +1443,7 @@
     "sphere": "Sphere",
     "spreadVMsAcrossGPUsBestPerformance": "跨 GPU 分布虚拟机（最佳性能）",
     "srIov": "SR-IOV",
+    "stackedGraph": "堆叠图",
     "standardSwitch": "标准开关",
     "standardSwitchInvalidMessage": "选择现有的标准交换机。",
     "standbyAdapters": "待机适配器",
@@ -1476,6 +1512,7 @@
     "takeSnapshot": "快照",
     "targetDiscovery": "目标发现",
     "targetName": "目标名称",
+    "targetObjects": "目标对象",
     "taskConsole": "任务控制台",
     "tasksEvents": "任务和事件",
     "tb": "结核病",
@@ -1511,18 +1548,26 @@
     "timeFormatDesc": "选择 {trademark} 客户端要使用的时间格式。",
     "timeIntervalBetweenFailures": "故障间隔时间",
     "timeRange": "时间范围",
+    "timeRangeShouldNotBeSmallerThanHour": "指定的时间范围无效。 不应小于1小时。",
     "timeServiceIsCurrentlyNotSynchronized": "时间服务当前未同步。",
+    "timespan": "时间跨度",
     "timestamp": "时间戳",
     "timeSynchronizationServices": "时间同步服务",
     "timeSynchronizationServicesHelpText": "您一次只能使用一项计时服务。 当 PTP 是主要协议时，NTP 只能在 \"监控\" 状态。 计时服务运行时，您不能设置手动时间。",
     "timeSynchronizationServicesTest": "时间同步服务测试",
+    "timeToShouldBeLaterTimeFrom": "指定的时间范围无效。 “结束”日期应晚于“开始”日期。",
     "to": "到",
+    "to2": "到",
+    "toCsv": "到CSV",
     "toggleFullscreenMode": "切换全屏模式",
     "togglePassthrough": "切换直通",
+    "toJpeg": "致jPEG",
     "tokenTrustworthiness": "代币可信度",
     "tools": "工具",
     "toolsEnable": "启用工具",
     "toolsNotInstalledVm": "此虚拟机上未安装这些工具。",
+    "toPng": "到PNG",
+    "toSvg": "到SVG",
     "total": "一般的",
     "total_migrations": "vMotion 迁移总数",
     "total_processors": "处理器总数",
@@ -1634,6 +1679,7 @@
     "virtualHardware": "虚拟硬件",
     "virtualMachine": "虚拟机",
     "virtualMachineName": "虚拟机名称",
+    "virtualMachineOperations": "虚拟机操作",
     "virtualMachinePortGroup": "虚拟机端口组",
     "virtualMachinePortGroupStandardSwitch": "虚拟机端口组",
     "virtualMachinesLabel": "在主机和集群视图中显示虚拟机",
@@ -1697,6 +1743,7 @@
     "warnings": "警告",
     "webConsole": "网络控制台",
     "wednesday": "周三",
+    "weeks2": "星期）",
     "whatIsTheProblemHowCan": "問題是什麼？我們能幫你什麼嗎？",
     "whenEnabledLockdown": "启用锁定模式后，将阻止远程用户直接登录该主机 该主机只能通过本地控制台或授权的集中管理应用程序进行访问",
     "whenNeeded": "需要的时候",
@@ -1722,19 +1769,170 @@
     "memoryReservationMb": "内存预留 (MB)",
     "memoryLimitMb": "内存限制 (MB)",
     "memoryAllocationType": "内存分配类型",
+    "isoTimeFormat": "时间采用 ISO 8601 格式",
     "totalCpuUsagePercent": "时间间隔内总 CPU 使用率（%）",
     "usageForTotal": "总用量",
     "core": "核",
     "cpuCoreNUsagePercent": "时间间隔内 CPU coreN 使用率（%）",
     "usageForCoreN": "coreN 的用法",
     "active": "积极的",
+    "memoryActiveName": "积极的",
+    "amountMemoryIsCurrently": "当前正在使用或最近已使用且因此无法删除到磁盘的内存量",
+    "usageInKb": "使用量（以 Kb 为单位）",
+    "amountMemoryUsedKernel": "内核用于缓冲输入/输出设备数据的内存量",
+    "buffers": "缓冲器",
+    "amountMemoryUsedKernelBuffering": "内核用于缓冲输入/输出设备数据的内存量",
+    "cached": "缓存的",
+    "amountMemoryUsedKernelCaching": "内核用于缓存数据以加速对磁盘上文件的访问所使用的内存量",
+    "memoryFreeName": "自由的",
+    "amountFreeMemory": "可用内存量",
     "swap": "交换",
+    "memorySwapName": "交换",
+    "sizeSwapFile": "交换文件的大小",
+    "swapFree": "免掉期",
+    "amountFreeSpaceSwapFile": "交换文件中的可用空间量",
+    "multicast": "组播",
+    "numberMulticastPacketsTransmitted": "采样间隔内发送和接收的组播数据包数",
+    "multicastPackets": "组播数据包",
     "num": "编号",
+    "transmitBandwidth": "传输带宽",
+    "averageAmountDataTransmit": "每秒平均传输数据量",
+    "dataTransmit": "数据传输",
+    "kBps": "千字节/秒",
+    "receiveBandwidth": "接收带宽",
+    "averageAmountDataReceive": "平均每秒接收的数据量",
+    "dataReceive": "数据接收",
+    "networkUsageName": "用法",
+    "networkUtilizationDuringInterval": "时间间隔内的网络利用率（传输速率和接收速率之和）",
+    "dataUsage": "数据使用",
+    "packetsReceived": "收到数据包",
+    "numberPacketsWithErrors": "采样间隔内收到的错误数据包数",
+    "packetsWithErrorsReceived": "收到错误的数据包",
+    "packetsTransmitted": "传输的数据包",
+    "numberPacketsWithErrorsTransmitted": "采样间隔内传输的错误包数",
+    "packetsWithErrorsTransmitted": "传输有错误的数据包",
+    "transmitPacketsDropped": "传输数据包丢失",
+    "numberTransmitsDropped": "丢弃的传输数",
+    "receivePacketsDropped": "接收数据包丢失",
+    "numberReceiveDropped": "接收丢失数",
+    "receiveErrorsDetected": "检测到接收错误",
+    "numberReceivesDropped": "丢弃的接收数",
+    "transmitErrorsDetected": "检测到传输错误",
+    "numberTransmitDropped": "传输丢失数",
+    "receiveCrcErrors": "接收crc错误",
+    "numberReceiveCrcErrors": "接收 crc 错误的数量",
+    "receiveFifoErrors": "接收先进先出错误",
+    "numberReceiveFifoErrors": "接收 fifo 错误数",
+    "receiveFrameErrors": "接收帧错误",
+    "numberReceiveFrameErrors": "接收帧错误数",
+    "receiveLengthErrors": "接收长度错误",
+    "numberReceiveLengthErrors": "接收长度错误数",
+    "receiveMissedErrors": "接收错过的错误",
+    "numberReceiveMissedErrors": "收到漏报错误的数量",
+    "receiveOverErrors": "接收错误",
+    "numberReceiveOverErrors": "接收错误数",
+    "transmitAbortedErrors": "传输中止错误",
+    "numberTransmitAbortedErrors": "传输中止错误数",
+    "transmitCarrierErrors": "传输载波错误",
+    "numberTransmitCarrierErrors": "传输载波错误数",
+    "transmitFifoErrors": "传输先进先出错误",
+    "numberTransmitFifoErrors": "传输 fifo 错误数",
+    "transmitHeartbeatErrors": "传输心跳错误",
+    "numberTransmitHeartbeatErrors": "传输心跳错误数",
+    "transmitWindowErrors": "传输窗口错误",
+    "numberTransmitWindowErrors": "传输窗口错误数",
+    "averageReadRequests": "每秒平均读取请求数",
+    "averageNumberDiskReads": "收集间隔期间每秒平均磁盘读取次数",
+    "numberReadAveraged": "平均读取数",
+    "averageWriteRequests": "每秒平均写入请求",
+    "averageNumberDiskWrites": "收集间隔期间每秒平均磁盘写入次数",
+    "numberWriteAveraged": "平均写入次数",
+    "readRequests": "读取请求",
+    "numberDiskReadsDuring": "收集间隔期间的磁盘读取次数",
+    "numberRead": "读取数量",
+    "writeRequests": "写请求",
+    "numberDiskRitesDuring": "收集间隔期间磁盘写入次数",
+    "numberWrite": "号码写入",
+    "maximumQueueDepth": "最大队列深度",
+    "maxQueueDepth": "最大队列深度",
+    "readLatency": "读取延迟",
+    "averageAmountTimeTakenDuringProcessScsi": "在收集间隔期间处理从来宾操作系统向虚拟机发出的 SCSI 读取命令所花费的平均时间",
+    "totalReadLatency": "总读取延迟",
+    "writeLatency": "写入延迟",
+    "averageAmountTimeTakenDuringProcessScsiByGuestOs": "在收集间隔期间处理由来宾操作系统向虚拟机发出的 SCSI 写入命令所花费的平均时间",
+    "totalWriteLatency": "总写入延迟",
+    "readRate": "读取率",
+    "averageNumberKilobytes": "收集间隔期间每秒从磁盘读取的平均千字节数",
     "read": "读",
+    "writeRate": "写入速率",
+    "averageNumberKilobytesWrittenDisk": "收集间隔期间每秒写入磁盘的平均千字节数",
     "write": "写",
+    "averageCommandsIssued": "每秒发出的平均命令",
+    "averageNumberScsi": "收集间隔期间每秒发出的平均 SCSI 命令数",
+    "commandsAveraged": "命令平均",
+    "commandsIssued": "发出命令",
+    "numberScsiCommands": "收集间隔期间发出的 SCSI 命令数",
     "commands": "命令",
+    "queueCommandLatency": "队列命令延迟",
+    "averageAmountTimeSpentVMKernelQueue": "收集间隔期间每个 SCSI 命令在 VMkernel 队列中花费的平均时间",
+    "queueLatency": "队列延迟",
+    "commandLatency": "命令延迟",
+    "averageAmountTimeTakenDuring": "在收集间隔期间处理来宾操作系统向虚拟机发出的 SCSI 命令所花费的平均时间",
+    "totalLatency": "总延迟",
+    "highestLatency": "最高延迟",
+    "highestLatencyValueAcross": "主机使用的所有磁盘中的最高延迟值",
+    "maxTotalLatency": "最大总延迟",
+    "diskUsedName": "用法",
+    "aggregatedDiskIORate": "聚合磁盘 I/O 速率。 对于主机，此指标包括收集间隔期间主机上运行的所有虚拟机的速率",
     "perc": "全氯乙烯",
+    "readBytes": "读取字节",
+    "averageNumberBytes": "收集间隔期间每秒从磁盘读取的平均字节数",
     "bytes": "字节",
+    "writeBytes": "写入字节",
+    "averageNumberBytesWrittenDisk": "收集间隔期间每秒写入磁盘的平均字节数",
+    "diskDevicesShares": "磁盘设备共享",
+    "amountDiskDevicesShares": "磁盘设备共享数量",
+    "usageInNum": "数量中的用法",
+    "diskDevicesLimitIOps": "磁盘设备限制iops",
+    "amountDiskDevicesLimitIOps": "磁盘设备数量限制IOPS",
+    "diskDevicesSize": "磁盘设备大小",
+    "amountDiskDevicesSize": "磁盘设备数量大小",
+    "amountReceivedPackets": "接收数据包数量",
+    "amountTransmittedPackets": "传输数据包数量",
+    "usedMhz": "使用兆赫",
+    "amountUsedMHz": "MHz 使用量",
+    "usageInMHz": "使用情况（以 MHz 为单位）",
+    "provisionedMhz": "规定的兆赫",
+    "amountProvisionedMHz": "所配置的 MHz 数量",
+    "currentVCpus": "当前 vcpu",
+    "currentNumberVirtualCPUs": "当前虚拟CPU数量",
+    "numberCoresPerSocket": "每个插槽的核心数",
+    "countCoresPerSocket": "每个插槽的核心数",
+    "limitMhz": "限制兆赫",
+    "limitMHz": "MHz限制",
+    "cPUUsagePercentage": "时间间隔内 CPU 使用率百分比",
+    "usagePerc": "perc 中的用法",
+    "memoryLimitMb2": "内存限制 MB",
+    "memoryLimitInMB": "内存限制（MB）",
+    "usageInMb": "使用量（以 Mb 为单位）",
+    "memorySizeMb": "内存大小MB",
+    "sizeAvailableMemoryInMB": "可用内存大小（MB）",
+    "memoryReservationMb2": "内存预留mb",
+    "memoryReservationInMB": "内存预留（MB）",
+    "memoryDramReadBandwidth": "内存 DRAM 读取带宽",
+    "memoryProvisionedMb": "内存配置 mb",
+    "provisionedMemoryInMB": "已配置的内存（以 MB 为单位）",
+    "memoryPMemReadBandwidth": "内存 pmem 读取带宽",
+    "memoryUsedMb": "已用内存 mb",
+    "usedMemoryInMB": "已用内存（MB）",
+    "memoryResidentSetSizeMb": "内存驻留集大小 mb",
+    "residentSetSizeMemoryInMB": "内存驻留集大小（MB）",
+    "storageAllocatedSpaceMb": "存储分配空间mb",
+    "allocatedStorageSpaceInMB": "分配的存储空间（以 MB 为单位）",
+    "storageUsedSpaceMb": "存储已用空间mb",
+    "amountUsedStorageSpaceInMB": "已用存储空间量（以 MB 为单位）",
+    "storageProvisionedSpaceMb": "存储配置空间mb",
+    "amountProvisionedStorageSpaceInMB": "已配置的存储空间量（以 MB 为单位）",
     "vmNameValidationDescription": "名称必须包含拉丁字母、数字、'-'、'_'、'.'。 并且必须包含 5 到 54 个字符。 如果跳过此步骤，系统会自动生成一个名称",
     "tokens": "Tokens",
     "deleteToken": "删除令牌",
@@ -1787,6 +1985,8 @@
     "halfDuplex": "半双工",
     "srIovDescription": "SR-IOV是一种允许多个虚拟机使用同一PCI设备作为虚拟直通设备的技术。",
     "settingsNameErrorDesc": "设置名称不能为空。",
+    "deletingSavedSettings": "确认删除已保存的设置",
+    "deletingSavedSettingsDesc": "保存的设置“{0}”将被删除。 继续？",
     "removeItem": "除去项目",
     "youAreHere": "你在这里",
     "showAllDatastores": "显示所有数据存储",
@@ -1989,6 +2189,7 @@
     "startAt": "开始于",
     "backupWindow": "备份窗口",
     "maxBandwidth": "最大限度。带宽",
+    "timeRangeShouldNotBeMoreThanMonth": "指定的时间范围无效。它不应超过 1 个月。",
     "thereIsAlertAndWarningOutOfSensors": "{sensors} 个传感器发出 {alert} 警报和 {warning} 警告。",
     "sensors": "传感器",
     "storageSensors": "存储传感器",
@@ -2129,6 +2330,19 @@
     "networkInProcurator": "检察官网络",
     "editMultiPathing": "编辑多路径",
     "deleteCountFiles": "删除 {0} 个文件？",
+    "processorUsage": "CPU使用率",
+    "totalCpuUsage": "CPU 总负载",
+    "processorLoad": "CPU负载",
+    "cpuUsageByCores": "按核心划分的 CPU 使用率",
+    "loadingSelectedProcessorCore": "加载选定的处理器内核",
+    "processorCoreLoad": "CPU核心负载",
+    "mhzProcessorCore": "每个处理器核心 MHz",
+    "numberMhzSelectProcCore": "每个选定处理器内核的 MHz 数量",
+    "numberOfMhz": "兆赫数",
+    "commonUsageMhz": "MHz 总使用量",
+    "totalCpuUsageMhz": "处理器总负载（以 MHz 为单位）",
+    "averageCoreFrequency": "平均核心频率",
+    "averageProcLoadMhz": "平均 CPU 负载（以 MHz 为单位）",
     "sourceVmName": "源虚拟机名称",
     "preferedPath": "首选路径",
     "preferedPathForIos": "I/O 的首选路径",
@@ -2330,221 +2544,7 @@
     "activeMemory": "主动记忆"
   },
   "inventoryMonitor": {
-    "temperature": "温度",
-    "advancedPerformance": "高级性能",
-    "emptyAdvancedGraphText": "此条目当前没有性能数据",
-    "noPerformanceCurrentlySelectedMetrics": "当前所选指标没有可用的性能数据",
-    "retrievingData": "检索数据",
-    "performanceChartLegend": "性能图表图例",
-    "selectOption": "选择选项",
-    "saveOptionsAs": "将选项另存为",
-    "chartOptions": "图表选项",
-    "deleteOptions": "删除选项",
-    "deletingSavedSettings": "确认删除已保存的设置",
-    "deletingSavedSettingsDesc": "保存的设置“{0}”将被删除。 继续？",
-    "processorUsage": "CPU使用率",
-    "totalCpuUsage": "CPU 总负载",
-    "processorLoad": "CPU负载",
-    "cpuUsageByCores": "按核心划分的 CPU 使用率",
-    "loadingSelectedProcessorCore": "加载选定的处理器内核",
-    "processorCoreLoad": "CPU核心负载",
-    "mhzProcessorCore": "每个处理器核心 MHz",
-    "numberMhzSelectProcCore": "每个选定处理器内核的 MHz 数量",
-    "numberOfMhz": "兆赫数",
-    "mhz": "兆赫",
-    "commonUsageMhz": "MHz 总使用量",
-    "totalCpuUsageMhz": "处理器总负载（以 MHz 为单位）",
-    "averageCoreFrequency": "平均核心频率",
-    "averageProcLoadMhz": "平均 CPU 负载（以 MHz 为单位）",
-    "memoryActiveName": "积极的",
-    "amountMemoryIsCurrently": "当前正在使用或最近已使用且因此无法删除到磁盘的内存量",
-    "usageInKb": "使用量（以 Kb 为单位）",
-    "buffers": "缓冲器",
-    "amountMemoryUsedKernelBuffering": "内核用于缓冲输入/输出设备数据的内存量",
-    "cached": "缓存的",
-    "amountMemoryUsedKernelCaching": "内核用于缓存数据以加速对磁盘上文件的访问所使用的内存量",
-    "memoryFreeName": "自由的",
-    "amountFreeMemory": "可用内存量",
-    "memorySwapName": "交换",
-    "sizeSwapFile": "交换文件的大小",
-    "swapFree": "免掉期",
-    "amountFreeSpaceSwapFile": "交换文件中的可用空间量",
-    "multicast": "组播",
-    "numberMulticastPacketsTransmitted": "采样间隔内发送和接收的组播数据包数",
-    "multicastPackets": "组播数据包",
-    "transmitBandwidth": "传输带宽",
-    "averageAmountDataTransmit": "每秒平均传输数据量",
-    "dataTransmit": "数据传输",
-    "kBps": "千字节/秒",
-    "receiveBandwidth": "接收带宽",
-    "averageAmountDataReceive": "平均每秒接收的数据量",
-    "dataReceive": "数据接收",
-    "networkUsageName": "用法",
-    "networkUtilizationDuringInterval": "时间间隔内的网络利用率（传输速率和接收速率之和）",
-    "dataUsage": "数据使用",
-    "packetsReceived": "收到数据包",
-    "numberPacketsWithErrors": "采样间隔内收到的错误数据包数",
-    "packetsWithErrorsReceived": "收到错误的数据包",
-    "packetsTransmitted": "传输的数据包",
-    "numberPacketsWithErrorsTransmitted": "采样间隔内传输的错误包数",
-    "packetsWithErrorsTransmitted": "传输有错误的数据包",
-    "transmitPacketsDropped": "传输数据包丢失",
-    "numberTransmitsDropped": "丢弃的传输数",
-    "receivePacketsDropped": "接收数据包丢失",
-    "numberReceiveDropped": "接收丢失数",
-    "receiveErrorsDetected": "检测到接收错误",
-    "numberReceivesDropped": "丢弃的接收数",
-    "transmitErrorsDetected": "检测到传输错误",
-    "numberTransmitDropped": "传输丢失数",
-    "receiveCrcErrors": "接收crc错误",
-    "numberReceiveCrcErrors": "接收 crc 错误的数量",
-    "receiveFifoErrors": "接收先进先出错误",
-    "numberReceiveFifoErrors": "接收 fifo 错误数",
-    "receiveFrameErrors": "接收帧错误",
-    "numberReceiveFrameErrors": "接收帧错误数",
-    "receiveLengthErrors": "接收长度错误",
-    "numberReceiveLengthErrors": "接收长度错误数",
-    "receiveMissedErrors": "接收错过的错误",
-    "numberReceiveMissedErrors": "收到漏报错误的数量",
-    "receiveOverErrors": "接收错误",
-    "numberReceiveOverErrors": "接收错误数",
-    "transmitAbortedErrors": "传输中止错误",
-    "numberTransmitAbortedErrors": "传输中止错误数",
-    "transmitCarrierErrors": "传输载波错误",
-    "numberTransmitCarrierErrors": "传输载波错误数",
-    "transmitFifoErrors": "传输先进先出错误",
-    "numberTransmitFifoErrors": "传输 fifo 错误数",
-    "transmitHeartbeatErrors": "传输心跳错误",
-    "numberTransmitHeartbeatErrors": "传输心跳错误数",
-    "transmitWindowErrors": "传输窗口错误",
-    "numberTransmitWindowErrors": "传输窗口错误数",
-    "averageReadRequests": "每秒平均读取请求数",
-    "averageNumberDiskReads": "收集间隔期间每秒平均磁盘读取次数",
-    "numberReadAveraged": "平均读取数",
-    "averageWriteRequests": "每秒平均写入请求",
-    "averageNumberDiskWrites": "收集间隔期间每秒平均磁盘写入次数",
-    "numberWriteAveraged": "平均写入次数",
-    "readRequests": "读取请求",
-    "numberDiskReadsDuring": "收集间隔期间的磁盘读取次数",
-    "numberRead": "读取数量",
-    "writeRequests": "写请求",
-    "numberDiskRitesDuring": "收集间隔期间磁盘写入次数",
-    "numberWrite": "号码写入",
-    "maximumQueueDepth": "最大队列深度",
-    "maxQueueDepth": "最大队列深度",
-    "readLatency": "读取延迟",
-    "averageAmountTimeTakenDuringProcessScsi": "在收集间隔期间处理从来宾操作系统向虚拟机发出的 SCSI 读取命令所花费的平均时间",
-    "totalReadLatency": "总读取延迟",
-    "writeLatency": "写入延迟",
-    "averageAmountTimeTakenDuringProcessScsiByGuestOs": "在收集间隔期间处理由来宾操作系统向虚拟机发出的 SCSI 写入命令所花费的平均时间",
-    "totalWriteLatency": "总写入延迟",
-    "readRate": "读取率",
-    "averageNumberKilobytes": "收集间隔期间每秒从磁盘读取的平均千字节数",
-    "writeRate": "写入速率",
-    "averageNumberKilobytesWrittenDisk": "收集间隔期间每秒写入磁盘的平均千字节数",
-    "averageCommandsIssued": "每秒发出的平均命令",
-    "averageNumberScsi": "收集间隔期间每秒发出的平均 SCSI 命令数",
-    "commandsAveraged": "命令平均",
-    "commandsIssued": "发出命令",
-    "numberScsiCommands": "收集间隔期间发出的 SCSI 命令数",
-    "queueCommandLatency": "队列命令延迟",
-    "averageAmountTimeSpentVMKernelQueue": "收集间隔期间每个 SCSI 命令在 VMkernel 队列中花费的平均时间",
-    "queueLatency": "队列延迟",
-    "commandLatency": "命令延迟",
-    "averageAmountTimeTakenDuring": "在收集间隔期间处理来宾操作系统向虚拟机发出的 SCSI 命令所花费的平均时间",
-    "totalLatency": "总延迟",
-    "highestLatency": "最高延迟",
-    "highestLatencyValueAcross": "主机使用的所有磁盘中的最高延迟值",
-    "maxTotalLatency": "最大总延迟",
-    "diskUsedName": "用法",
-    "aggregatedDiskIORate": "聚合磁盘 I/O 速率。 对于主机，此指标包括收集间隔期间主机上运行的所有虚拟机的速率",
-    "readBytes": "读取字节",
-    "averageNumberBytes": "收集间隔期间每秒从磁盘读取的平均字节数",
-    "writeBytes": "写入字节",
-    "averageNumberBytesWrittenDisk": "收集间隔期间每秒写入磁盘的平均字节数",
-    "diskDevicesShares": "磁盘设备共享",
-    "amountDiskDevicesShares": "磁盘设备共享数量",
-    "usageInNum": "数量中的用法",
-    "diskDevicesLimitIOps": "磁盘设备限制iops",
-    "amountDiskDevicesLimitIOps": "磁盘设备数量限制IOPS",
-    "amountReceivedPackets": "接收数据包数量",
-    "amountTransmittedPackets": "传输数据包数量",
-    "usedMhz": "使用兆赫",
-    "amountUsedMHz": "MHz 使用量",
-    "usageInMHz": "使用情况（以 MHz 为单位）",
-    "provisionedMhz": "规定的兆赫",
-    "amountProvisionedMHz": "所配置的 MHz 数量",
-    "currentVCpus": "当前 vcpu",
-    "currentNumberVirtualCPUs": "当前虚拟CPU数量",
-    "corePerSocket": "每个插槽的核心数",
-    "numberCoresPerSocket": "每个插槽的核心数",
-    "countCoresPerSocket": "每个插槽的核心数",
-    "limitMhz": "限制兆赫",
-    "limitMHz": "MHz限制",
-    "cPUUsagePercentage": "时间间隔内 CPU 使用率百分比",
-    "usagePerc": "perc 中的用法",
-    "memoryLimitMb2": "内存限制 MB",
-    "memoryLimitInMB": "内存限制（MB）",
-    "usageInMb": "使用量（以 Mb 为单位）",
-    "memorySizeMb": "内存大小MB",
-    "sizeAvailableMemoryInMB": "可用内存大小（MB）",
-    "memoryReservationMb2": "内存预留mb",
-    "memoryReservationInMB": "内存预留（MB）",
-    "memoryDramReadBandwidth": "内存 DRAM 读取带宽",
-    "memoryProvisionedMb": "内存配置 mb",
-    "provisionedMemoryInMB": "已配置的内存（以 MB 为单位）",
-    "memoryPMemReadBandwidth": "内存 pmem 读取带宽",
-    "memoryUsedMb": "已用内存 mb",
-    "usedMemoryInMB": "已用内存（MB）",
-    "memoryResidentSetSizeMb": "内存驻留集大小 mb",
-    "residentSetSizeMemoryInMB": "内存驻留集大小（MB）",
-    "storageUsedSpaceMb": "存储已用空间mb",
-    "amountUsedStorageSpaceInMB": "已用存储空间量（以 MB 为单位）",
-    "storageProvisionedSpaceMb": "存储配置空间mb",
-    "amountProvisionedStorageSpaceInMB": "已配置的存储空间量（以 MB 为单位）",
-    "amountMemoryUsedKernel": "内核用于缓冲输入/输出设备数据的内存量",
-    "diskDevicesSize": "磁盘设备大小",
-    "amountDiskDevicesSize": "磁盘设备数量大小",
-    "storageAllocatedSpaceMb": "存储分配空间mb",
-    "allocatedStorageSpaceInMB": "分配的存储空间（以 MB 为单位）",
-    "selectCountersForThisChart": "选择此图表的计数器",
-    "realTime": "即时的",
-    "lastDay": "最后一天",
-    "lastWeek": "上星期",
-    "lastMonth": "上个月",
-    "lastYear": "去年",
-    "customInterval": "自定义间隔",
-    "hours2": "小时）",
-    "days2": "天）",
-    "weeks2": "星期）",
-    "months2": "月份",
-    "lineGraph": "线形图",
-    "stackedGraph": "堆叠图",
-    "timespan": "时间跨度",
-    "from2": "从",
-    "to2": "到",
-    "isoTimeFormat": "时间采用 ISO 8601 格式",
-    "chartType": "图表类型",
-    "targetObjects": "目标对象",
-    "selectObjectForChart": "选择此图表的对象",
-    "chartMetrics": "图表指标",
-    "noCountersSelected": "未选择计数器",
-    "cpuUsageInPercent": "以 % 表示的 CPU 使用率",
-    "virtualMachineOperations": "虚拟机操作",
-    "cpuUsageInMhz": "以 MHz 为单位的 CPU 使用率",
-    "toPng": "到PNG",
-    "toJpeg": "致jPEG",
-    "toSvg": "到SVG",
-    "toCsv": "到CSV",
-    "period": "时期",
-    "invalidTimeEntry": "时间输入无效",
-    "oneOfSelectedDatesIsInTheFuture": "指定的时间范围无效。 选定的日期之一是未来的日期。",
-    "timeToShouldBeLaterTimeFrom": "指定的时间范围无效。 “结束”日期应晚于“开始”日期。",
-    "timeRangeShouldNotBeSmallerThanHour": "指定的时间范围无效。 不应小于1小时。",
-    "timeRangeShouldNotBeMoreThanMonth": "指定的时间范围无效。它不应超过 1 个月。",
-    "overview": "概述",
-    "spaceUtilization": "空间利用",
-    "changeCustomInterval": "更改自定义间隔"
+    "temperature": "温度"
   },
   "inventoryTabs": {
     "summary": "概括",