bambu-printer-mcp 1.1.83 → 1.1.85

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/CONTRIBUTORS.md CHANGED
@@ -6,6 +6,7 @@ Thank you to everyone who builds, tests, reports problems, and shares real print
6
6
 
7
7
  | Contributor | Contribution |
8
8
  | --- | --- |
9
+ | [Rowan McMahon (RowanMcMahon)](https://github.com/RowanMcMahon) | Reports A1 firmware 01.08.01.00 retaining `FAILED` after a stopped job and contributes the narrow terminal-state fix and regression tests in [#133](https://github.com/DMontgomery40/bambu-printer-mcp/pull/133). Supplies fresh MQTT evidence and reports a subsequent job reaching `FINISH`; this is contributor-reported status, not inspected physical-part verification. |
9
10
  | [billh-hub](https://github.com/billh-hub) | Reports and isolates three official H2C time-lapse and filament-change command rejections in [#84](https://github.com/DMontgomery40/bambu-printer-mcp/issues/84), supplies emitted commands and multi-colour reproduction evidence, and distinguishes the unknown cooling parameter for source-backed investigation. The correction preserves independent safety checks; no maintainer physical printing is claimed. |
10
11
  | [Steve Pritchard (sjpritchard)](https://github.com/sjpritchard) | Reports and diagnoses H2C per-variant first-layer temperature rejection in [#81](https://github.com/DMontgomery40/bambu-printer-mcp/issues/81), supplies the exact official preset metadata and reproduction, and identifies the upstream variant-mapping contract. Verification uses synthetic slicing and offline regressions, not physical printing. |
11
12
  | [JackCA](https://github.com/JackCA) | Reports an X2D retaining `FAILED` with no active print/HMS error after cancellation, supplies read-only printer evidence for `fail_reason: 0300400C`, and contributes narrow canceled-task recovery, job-bound physical confirmation, a recheck of the job and error codes after connecting and before clearing hardware errors on any model, and regression coverage in [#76](https://github.com/DMontgomery40/bambu-printer-mcp/pull/76). Physical print delivery after the fix remains unverified. |
@@ -59,3 +60,7 @@ This is community recognition, separate from code authorship in this repository.
59
60
  Thanks to the [MQTT.js contributors](https://github.com/mqttjs/MQTT.js/releases/tag/v5.16.1), [proxy-addr maintainers](https://github.com/jshttp/proxy-addr/releases/tag/v2.0.8), and [source-map-js maintainers](https://github.com/7rulnik/source-map-js) for the reconnect and security fixes incorporated in 1.1.31. This recognizes upstream dependency work separately from authorship in this repository.
60
61
 
61
62
  Thanks to the [OrcaSlicer contributors](https://github.com/OrcaSlicer/OrcaSlicer/releases/tag/v2.5.0) for the published 2.5.0 source and macOS build used to reproduce and validate shared nozzle-flow metadata. This credits upstream software and contracts; it does not claim hardware verification or authorship of this repository’s fix.
63
+
64
+ Thanks to the [basic-ftp maintainers](https://github.com/patrickjuchli/basic-ftp/releases/tag/v6.2.6) and [MCP TypeScript SDK contributors](https://github.com/modelcontextprotocol/typescript-sdk) for compatible patch updates, including the upstream recursive-download path traversal correction.
65
+
66
+ - **David Montgomery** — reports and reproduces the macOS installed-slicer `bamboo_model` test scratch leak (#139); the regression is verified with the real isolated Bambu Studio CLI and mocked scratch cleanup.
package/README.md CHANGED
@@ -1186,6 +1186,8 @@ Slice an STL or 3MF file using an external slicer and return the path to the out
1186
1186
 
1187
1187
  `slicer_path` and `slicer_profile` fall back to the `SLICER_PATH` and `SLICER_PROFILE` environment variables when omitted. Per-call `slicer_path` overrides require `MCP_ALLOW_EXECUTABLE_ARG=1`.
1188
1188
 
1189
+ **A slicer that waits on a window:** on macOS each Bambu Studio, OrcaSlicer or FULU slice runs with an empty home folder of its own (`CFFIXED_USER_HOME` under `TEMP_DIR`), so macOS's "reopen windows?" question after a slicer crash can't stop it. On macOS, a Bambu-compatible slicer that still uses no CPU and writes nothing for `SLICER_STALL_SECONDS` (default 20, 0 turns it off) is stopped, and the error's `structuredContent.code` is `slicer-waiting-on-dialog`. Nothing is sent to the printer. Open the slicer once, answer what it shows, quit it and slice again.
1190
+
1189
1191
  You can provide either `template_3mf_path` or `template_name` when you want to slice from a saved template. `template_name` resolves through the local template registry directory configured for the server.
1190
1192
 
1191
1193
  For printing on a Bambu printer, the recommended workflow is: export a sliced 3MF from your selected Bambu-compatible slicer, then pass that output path to `print_3mf`.
@@ -5,7 +5,7 @@ import { cameraNumber } from "./camera-tools.js";
5
5
  import { cameraFrameParser, cameraAuth } from "./camera-wire.js";
6
6
  import { createHash } from "node:crypto";
7
7
  import { controlReply, refusedControlMessage } from "../control-reply.js";
8
- import { isFinishedP1SJob, isCancelledX2DJob, readFreshPrinterStatus } from "../safety/printer-state.js";
8
+ import { isFinishedIdleJob, isCancelledX2DJob, readFreshPrinterStatus } from "../safety/printer-state.js";
9
9
  import fs from "node:fs/promises";
10
10
  import { createReadStream, readFileSync, existsSync, mkdirSync, writeFileSync, renameSync, rmSync } from "node:fs";
11
11
  import path from "node:path";
@@ -659,7 +659,7 @@ export class BambuImplementation {
659
659
  }
660
660
  finishedJobIdentity(status) {
661
661
  const raw = status.raw;
662
- return raw.gcode_state === "FINISH" || (isCancelledX2DJob(raw, String(status.model ?? "")) || isFinishedP1SJob(raw, String(status.model ?? "")))
662
+ return raw.gcode_state === "FINISH" || (isCancelledX2DJob(raw, String(status.model ?? "")) || isFinishedIdleJob(raw, String(status.model ?? "")))
663
663
  ? printJobIdentity(raw)
664
664
  : undefined;
665
665
  }
package/dist/refusal.d.ts CHANGED
@@ -1,19 +1,26 @@
1
1
  /**
2
- * A printer refusal with a stable diagnostic code, retained for existing clients.
3
- * Counterpart uses structuredContent.printOutcome for dispatch truth, never
4
- * these firmware-specific codes or the message.
2
+ * A refusal with a stable code, returned as structuredContent.code on the tool's error, so clients such as
3
+ * Counterpart act on the code instead of matching the message (whose words, HMS numbers, firmware and slicer
4
+ * details change). None of them starts a print. Whether a print command was sent is dispatch truth: clients
5
+ * read structuredContent.printOutcome for it, never these codes or the message.
5
6
  *
6
7
  * - printer-command-rejected: the printer refused the print command itself (for Bambu, HMS 0500-0500-0001-0007,
7
8
  * MQTT command verification); the file was uploaded and the command sent, but nothing is printing.
8
9
  * - printer-not-ready: the printer isn't in a state that can start a print (busy, paused, failed, unknown).
9
10
  * - printer-upload-failed: the print file didn't reach the printer, so no print command was sent.
11
+ * - slicer-waiting-on-dialog: the slicer stopped working (no CPU, no output) as it does while a window waits for an
12
+ * answer, and was stopped; nothing was sliced or sent. Not the slicer's verdict on the model: no slicer_report.
10
13
  */
11
- export declare const REFUSAL_CODES: readonly ["printer-command-rejected", "printer-not-ready", "printer-upload-failed"];
14
+ export declare const REFUSAL_CODES: readonly ["printer-command-rejected", "printer-not-ready", "printer-upload-failed", "slicer-waiting-on-dialog"];
12
15
  export type RefusalCode = (typeof REFUSAL_CODES)[number];
13
16
  export declare class PrinterRefusal extends Error {
14
17
  readonly code: RefusalCode;
15
18
  constructor(code: RefusalCode, message: string);
16
19
  }
20
+ /** A slicer stopped because it waited on a dialog (src/slicer/slicer-launch.ts); carries slicer-waiting-on-dialog. */
21
+ export declare class SlicerStalled extends PrinterRefusal {
22
+ constructor(message: string);
23
+ }
17
24
  /** counterpart/1 dispatch-tool errors describe dispatch truth independently of firmware-specific codes. */
18
25
  export type PrintOutcome = "not-sent" | "unknown" | "rejected";
19
26
  export declare function withPrintDispatch<T>(run: () => T): T;
package/dist/refusal.js CHANGED
@@ -1,15 +1,18 @@
1
1
  import { AsyncLocalStorage } from "node:async_hooks";
2
2
  /**
3
- * A printer refusal with a stable diagnostic code, retained for existing clients.
4
- * Counterpart uses structuredContent.printOutcome for dispatch truth, never
5
- * these firmware-specific codes or the message.
3
+ * A refusal with a stable code, returned as structuredContent.code on the tool's error, so clients such as
4
+ * Counterpart act on the code instead of matching the message (whose words, HMS numbers, firmware and slicer
5
+ * details change). None of them starts a print. Whether a print command was sent is dispatch truth: clients
6
+ * read structuredContent.printOutcome for it, never these codes or the message.
6
7
  *
7
8
  * - printer-command-rejected: the printer refused the print command itself (for Bambu, HMS 0500-0500-0001-0007,
8
9
  * MQTT command verification); the file was uploaded and the command sent, but nothing is printing.
9
10
  * - printer-not-ready: the printer isn't in a state that can start a print (busy, paused, failed, unknown).
10
11
  * - printer-upload-failed: the print file didn't reach the printer, so no print command was sent.
12
+ * - slicer-waiting-on-dialog: the slicer stopped working (no CPU, no output) as it does while a window waits for an
13
+ * answer, and was stopped; nothing was sliced or sent. Not the slicer's verdict on the model: no slicer_report.
11
14
  */
12
- export const REFUSAL_CODES = ["printer-command-rejected", "printer-not-ready", "printer-upload-failed"];
15
+ export const REFUSAL_CODES = ["printer-command-rejected", "printer-not-ready", "printer-upload-failed", "slicer-waiting-on-dialog"];
13
16
  export class PrinterRefusal extends Error {
14
17
  constructor(code, message) {
15
18
  super(message);
@@ -17,6 +20,13 @@ export class PrinterRefusal extends Error {
17
20
  this.name = "PrinterRefusal";
18
21
  }
19
22
  }
23
+ /** A slicer stopped because it waited on a dialog (src/slicer/slicer-launch.ts); carries slicer-waiting-on-dialog. */
24
+ export class SlicerStalled extends PrinterRefusal {
25
+ constructor(message) {
26
+ super("slicer-waiting-on-dialog", message);
27
+ this.name = "SlicerStalled";
28
+ }
29
+ }
20
30
  const printDispatch = new AsyncLocalStorage();
21
31
  export function withPrintDispatch(run) {
22
32
  return printDispatch.run({ attempted: false }, run);
@@ -51,10 +51,14 @@ export declare function finiteNumber(value: unknown): number | undefined;
51
51
  * and print dispatch rechecks the identity of the observed job.
52
52
  */
53
53
  export declare function isCancelledX2DJob(raw: Record<string, any>, model: string): boolean;
54
- /** Bambu Studio 2.8.2.61 marks FAILED as finished. Limit P1S recovery to
54
+ /** Models observed retaining FAILED for a named prior job while explicitly reporting
55
+ * idle with no print error and no HMS: P1S (#87) and A1 firmware 01.08.01.00 after a
56
+ * user-stopped job. Add a model only with that hardware evidence. */
57
+ export declare const FINISHED_WHEN_FAILED_IDLE_MODELS: ReadonlySet<string>;
58
+ /** Bambu Studio 2.8.2.61 marks FAILED as finished. Limit recovery to the models above and
55
59
  * a named prior job explicitly reporting idle, no print error and no HMS.
56
60
  * Dispatch rechecks the observed job identity. */
57
- export declare function isFinishedP1SJob(raw: Record<string, any>, model: string): boolean;
61
+ export declare function isFinishedIdleJob(raw: Record<string, any>, model: string): boolean;
58
62
  /** Nozzles whose reported diameter and type are configured settings rather than chip readings. */
59
63
  export declare function unchippedNozzles(raw: unknown): number[];
60
64
  export type HmsEntry = {
@@ -131,11 +131,17 @@ export function isCancelledX2DJob(raw, model) {
131
131
  finiteNumber(raw.print_error) === 0 && finiteNumber(raw.fail_reason) === 0x0300400c &&
132
132
  [raw.gcode_file, raw.subtask_name].some(value => typeof value === "string" && value.trim().length > 0);
133
133
  }
134
- /** Bambu Studio 2.8.2.61 marks FAILED as finished. Limit P1S recovery to
134
+ /** Models observed retaining FAILED for a named prior job while explicitly reporting
135
+ * idle with no print error and no HMS: P1S (#87) and A1 firmware 01.08.01.00 after a
136
+ * user-stopped job. Add a model only with that hardware evidence. */
137
+ export const FINISHED_WHEN_FAILED_IDLE_MODELS = new Set(["p1s", "a1"]);
138
+ /** Bambu Studio 2.8.2.61 marks FAILED as finished. Limit recovery to the models above and
135
139
  * a named prior job explicitly reporting idle, no print error and no HMS.
136
140
  * Dispatch rechecks the observed job identity. */
137
- export function isFinishedP1SJob(raw, model) {
138
- return normalizeModel(model) === "p1s" && raw.gcode_state === "FAILED" && raw.print_type === "idle" &&
141
+ export function isFinishedIdleJob(raw, model) {
142
+ const normalized = normalizeModel(model);
143
+ return normalized !== undefined && FINISHED_WHEN_FAILED_IDLE_MODELS.has(normalized) &&
144
+ raw.gcode_state === "FAILED" && raw.print_type === "idle" &&
139
145
  finiteNumber(raw.print_error) === 0 && Array.isArray(raw.hms) && raw.hms.length === 0 &&
140
146
  [raw.gcode_file, raw.subtask_name].some(value => typeof value === "string" && value.trim().length > 0);
141
147
  }
@@ -329,7 +335,7 @@ export function isPauseNotice(raw, requireIdle) {
329
335
  }
330
336
  function validateErrors(raw, requireIdle, serial, model) {
331
337
  const state = typeof raw.gcode_state === "string" ? raw.gcode_state.toUpperCase() : "UNKNOWN";
332
- const terminal = isCancelledX2DJob(raw, model) || isFinishedP1SJob(raw, model);
338
+ const terminal = isCancelledX2DJob(raw, model) || isFinishedIdleJob(raw, model);
333
339
  if (requireIdle && !["IDLE", "FINISH"].includes(state) && !terminal)
334
340
  throw new PrinterRefusal("printer-not-ready", `Printer state ${state} is not safely idle.`);
335
341
  if (!requireIdle && !["IDLE", "FINISH", "RUNNING", "PAUSE"].includes(state) && !terminal)
@@ -0,0 +1,34 @@
1
+ import { type ChildProcess } from "node:child_process";
2
+ import { SlicerStalled } from "../refusal.js";
3
+ export interface SlicerLaunch {
4
+ /** The environment for the slicer process (undefined: inherit this server's). */
5
+ env?: NodeJS.ProcessEnv;
6
+ /** Seconds without CPU or output after which the slice is stopped and reported (watchForStall); 0: never. */
7
+ stallSeconds: number;
8
+ /** Removes this launch's home folder. */
9
+ cleanup(): Promise<void>;
10
+ }
11
+ /**
12
+ * The launch for one slice. On macOS a Bambu-compatible CLI gets its own empty home folder (always: an inherited
13
+ * CFFIXED_USER_HOME is replaced, since a home that held a stalled slice may hold the history that stalled it), and
14
+ * is watched for stalls. A new folder each slice, not one kept in the data folder, so no crash history can build up
15
+ * in it. Elsewhere nothing changes: no AppKit, and a slicer there may run behind a wrapper (AppImage, Flatpak) whose
16
+ * own CPU says nothing about the slicer's.
17
+ */
18
+ export declare function prepareSlicerLaunch(slicerType: string, tempDir: string, platform?: NodeJS.Platform): Promise<SlicerLaunch>;
19
+ /**
20
+ * Seconds a slicer may use no CPU and write nothing before it is treated as waiting on a dialog
21
+ * (SLICER_STALL_SECONDS, 1-3600; 0 turns the check off). A slice is never idle that long: it computes or writes.
22
+ */
23
+ export declare function slicerStallSeconds(raw?: string | undefined): number;
24
+ /** "[[dd-]hh:]mm:ss[.cc]" from ps -o time= (macOS: m:ss.cc; Linux: [dd-]hh:mm:ss), in seconds. */
25
+ export declare function parseCpuTime(text: string): number | undefined;
26
+ /**
27
+ * Calls onStall once when the child has used no CPU and written nothing to stdout or stderr for `seconds`, counted
28
+ * in consecutive polls (so a Mac that sleeps meanwhile doesn't count the sleep). It starts counting only after the
29
+ * child has shown it is running (output or CPU), and does nothing where CPU time can't be read. Returns a stop
30
+ * function; it also stops when the child exits.
31
+ */
32
+ export declare function watchForStall(child: ChildProcess, seconds: number, onStall: () => void): () => void;
33
+ /** The failure for a slicer stopped by watchForStall. */
34
+ export declare function stalledSlicerError(slicerType: string, seconds: number): SlicerStalled;
@@ -0,0 +1,145 @@
1
+ import { execFile } from "node:child_process";
2
+ import fs from "node:fs";
3
+ import path from "node:path";
4
+ import { SlicerStalled } from "../refusal.js";
5
+ /**
6
+ * How a Bambu-compatible slicer CLI is launched so that it can't block on per-user AppKit launch state, and how a
7
+ * slicer that blocks anyway is noticed.
8
+ *
9
+ * Bambu Studio's command line opens a hidden GLFW window to draw plate thumbnails for --export-3mf (Bambu Studio
10
+ * 02.08.02.61 src/BambuStudio.cpp:6231-6259; OrcaSlicer and FULU's OrcaSlicer-bambulab inherit that code). The
11
+ * window starts NSApplication, and AppKit's window restoration then reads the person's crash history from
12
+ * ~/Library/Application Support/CrashReporter/<executable>_<hardware UUID>.plist. When that history says the app
13
+ * crashed while restoring windows, AppKit raises its modal "reopen windows?" alert, and the slicer waits on it at 0%
14
+ * CPU forever. Stopping it never answers the alert, so the next slice waits again.
15
+ *
16
+ * The CLI reads nothing else from the home folder: it takes its profiles from its own bundle (resources_dir(),
17
+ * BambuStudio.cpp:8325-8328) or from the files this server passes, its temporary files from TMPDIR
18
+ * (BambuStudio.cpp:1558-1559), and it sets no data directory unless --datadir is given (BambuStudio.cpp:8363-8367).
19
+ * So each slice gets a fresh, empty home of its own through CFFIXED_USER_HOME, under this server's TEMP_DIR, which
20
+ * AppKit honours for that history. Its preferences still come from the person's own (cfprefsd ignores
21
+ * CFFIXED_USER_HOME) and HOME is unchanged, so nothing else the slicer or this server reads moves.
22
+ */
23
+ /** Slicer types launched from a local Bambu-compatible CLI binary. */
24
+ const BAMBU_CLI_TYPES = new Set(["bambustudio", "orcaslicer", "orcaslicer-bambulab"]);
25
+ /**
26
+ * The launch for one slice. On macOS a Bambu-compatible CLI gets its own empty home folder (always: an inherited
27
+ * CFFIXED_USER_HOME is replaced, since a home that held a stalled slice may hold the history that stalled it), and
28
+ * is watched for stalls. A new folder each slice, not one kept in the data folder, so no crash history can build up
29
+ * in it. Elsewhere nothing changes: no AppKit, and a slicer there may run behind a wrapper (AppImage, Flatpak) whose
30
+ * own CPU says nothing about the slicer's.
31
+ */
32
+ export async function prepareSlicerLaunch(slicerType, tempDir, platform = process.platform) {
33
+ if (!BAMBU_CLI_TYPES.has(slicerType) || platform !== "darwin")
34
+ return { stallSeconds: 0, cleanup: async () => { } };
35
+ await fs.promises.mkdir(tempDir, { recursive: true });
36
+ const home = await fs.promises.mkdtemp(path.join(tempDir, "slicer-home-"));
37
+ return {
38
+ env: { ...process.env, CFFIXED_USER_HOME: home },
39
+ stallSeconds: slicerStallSeconds(),
40
+ cleanup: () => fs.promises.rm(home, { recursive: true, force: true }).catch(() => undefined),
41
+ };
42
+ }
43
+ const DEFAULT_STALL_SECONDS = 20;
44
+ /**
45
+ * Seconds a slicer may use no CPU and write nothing before it is treated as waiting on a dialog
46
+ * (SLICER_STALL_SECONDS, 1-3600; 0 turns the check off). A slice is never idle that long: it computes or writes.
47
+ */
48
+ export function slicerStallSeconds(raw = process.env.SLICER_STALL_SECONDS) {
49
+ const text = raw?.trim();
50
+ if (!text)
51
+ return DEFAULT_STALL_SECONDS;
52
+ const value = Number(text);
53
+ return Number.isFinite(value) && value >= 0 && value <= 3600 ? value : DEFAULT_STALL_SECONDS;
54
+ }
55
+ /** "[[dd-]hh:]mm:ss[.cc]" from ps -o time= (macOS: m:ss.cc; Linux: [dd-]hh:mm:ss), in seconds. */
56
+ export function parseCpuTime(text) {
57
+ const match = /^\s*(?:(\d+)-)?((?:\d+:){0,2}\d+(?:\.\d+)?)\s*$/.exec(text);
58
+ if (!match)
59
+ return undefined;
60
+ const seconds = match[2].split(":").reduce((total, part) => total * 60 + Number(part), 0);
61
+ return (match[1] ? Number(match[1]) * 86400 : 0) + seconds;
62
+ }
63
+ /** The process's CPU time so far, in seconds, or undefined when it can't be read (Windows, an exited process). */
64
+ async function cpuSeconds(pid) {
65
+ if (process.platform === "win32")
66
+ return undefined;
67
+ if (process.platform === "linux") {
68
+ try {
69
+ // utime and stime, fields 14 and 15, after the parenthesised command name (which may hold spaces).
70
+ const stat = await fs.promises.readFile(`/proc/${pid}/stat`, "utf8");
71
+ const fields = stat.slice(stat.lastIndexOf(")") + 2).split(" ");
72
+ return (Number(fields[11]) + Number(fields[12])) / 100;
73
+ }
74
+ catch {
75
+ return undefined;
76
+ }
77
+ }
78
+ return new Promise(resolve => {
79
+ execFile("/bin/ps", ["-o", "time=", "-p", String(pid)], { timeout: 5000 }, (error, stdout) => {
80
+ resolve(error ? undefined : parseCpuTime(stdout));
81
+ });
82
+ });
83
+ }
84
+ /** CPU seconds under which a poll counts as idle: a slicing CLI uses far more, a blocked one none. */
85
+ const IDLE_CPU_SECONDS = 0.05;
86
+ /**
87
+ * Calls onStall once when the child has used no CPU and written nothing to stdout or stderr for `seconds`, counted
88
+ * in consecutive polls (so a Mac that sleeps meanwhile doesn't count the sleep). It starts counting only after the
89
+ * child has shown it is running (output or CPU), and does nothing where CPU time can't be read. Returns a stop
90
+ * function; it also stops when the child exits.
91
+ */
92
+ export function watchForStall(child, seconds, onStall) {
93
+ if (!seconds || child.pid === undefined || process.platform === "win32")
94
+ return () => { };
95
+ const pid = child.pid;
96
+ const pollMs = Math.min(2000, (seconds * 1000) / 4);
97
+ const pollsNeeded = Math.ceil((seconds * 1000) / pollMs);
98
+ let output = false, started = false, idlePolls = 0, lastCpu, stopped = false, polling = false;
99
+ const sawOutput = () => { output = true; };
100
+ child.stdout?.on("data", sawOutput);
101
+ child.stderr?.on("data", sawOutput);
102
+ const timer = setInterval(async () => {
103
+ if (polling || stopped)
104
+ return;
105
+ polling = true;
106
+ try {
107
+ const cpu = await cpuSeconds(pid);
108
+ if (stopped || cpu === undefined)
109
+ return;
110
+ const busy = output || lastCpu === undefined || cpu - lastCpu >= IDLE_CPU_SECONDS;
111
+ if (output || cpu >= IDLE_CPU_SECONDS)
112
+ started = true;
113
+ output = false;
114
+ lastCpu = cpu;
115
+ idlePolls = busy || !started ? 0 : idlePolls + 1;
116
+ // A slicer that exited meanwhile finished; its exit, not a stall, is reported.
117
+ if (idlePolls >= pollsNeeded && child.exitCode === null && child.signalCode === null) {
118
+ stop();
119
+ onStall();
120
+ }
121
+ }
122
+ finally {
123
+ polling = false;
124
+ }
125
+ }, pollMs);
126
+ const stop = () => {
127
+ if (stopped)
128
+ return;
129
+ stopped = true;
130
+ clearInterval(timer);
131
+ child.stdout?.off("data", sawOutput);
132
+ child.stderr?.off("data", sawOutput);
133
+ };
134
+ child.once("exit", stop);
135
+ child.once("error", stop);
136
+ return stop;
137
+ }
138
+ const SLICER_NAMES = { bambustudio: "Bambu Studio", orcaslicer: "OrcaSlicer", "orcaslicer-bambulab": "OrcaSlicer" };
139
+ /** The failure for a slicer stopped by watchForStall. */
140
+ export function stalledSlicerError(slicerType, seconds) {
141
+ const name = SLICER_NAMES[slicerType] ?? "The slicer";
142
+ return new SlicerStalled(`${name} stopped slicing: it used no processor time and wrote nothing for ${seconds} seconds, which is what it does ` +
143
+ `while it waits on a window nobody can answer, such as a question it asks after a crash. It was stopped, and nothing ` +
144
+ `was sent to the printer. Open ${name} once, answer any question it shows, quit it, then slice again.`);
145
+ }
@@ -19,6 +19,7 @@ import { applyProcessOverrides } from '../slicer/process-overrides.js';
19
19
  import { profileJsonFiles } from '../slicer/profile-files.js';
20
20
  import { materializeOrcaProfilesRoot, stageOrcaCliProfiles } from '../slicer/orca-profile-cache.js';
21
21
  import { sliceWithOrcaApi, validateRemoteSliceOptions } from '../slicer/remote-slicer.js';
22
+ import { prepareSlicerLaunch, stalledSlicerError, watchForStall } from '../slicer/slicer-launch.js';
22
23
  /** How long a slice's folder (its sliced file and result.json) is kept: a day, then a later slice removes it. */
23
24
  const SLICE_FOLDER_LIFETIME_MS = 24 * 60 * 60 * 1000;
24
25
  const readFileAsync = promisify(fs.readFile);
@@ -1660,43 +1661,64 @@ export class STLManipulator extends EventEmitter {
1660
1661
  if (progressCallback)
1661
1662
  progressCallback(20, `Executing slicer: ${slicerPath} ${args.join(' ')}`);
1662
1663
  console.error(`Executing: ${slicerPath} ${args.join(' ')}`);
1664
+ // A Bambu-compatible CLI runs in a home folder of its own (macOS), and one that waits on a dialog is stopped
1665
+ // and reported instead of waiting forever (src/slicer/slicer-launch.ts).
1666
+ const launch = await prepareSlicerLaunch(slicerType, this.tempDir);
1667
+ const stallSeconds = launch.stallSeconds;
1668
+ let stalled = false;
1663
1669
  // Execute the slicer
1664
- await new Promise((resolve, reject) => {
1665
- const process = execFile(slicerPath, args, (error, stdout, stderr) => {
1666
- if (error) {
1667
- console.error(`Slicer Error: ${error.message}`);
1668
- console.error(`Slicer Stderr: ${stderr}`);
1669
- const slicerResult = cliResult ? readCliResult(cliResult) : undefined;
1670
- reject(new SlicerRunError(describeSlicerFailure(error, stdout, stderr, cliResult), slicerResult));
1671
- }
1672
- else {
1673
- console.error(`Slicer Stdout: ${stdout}`);
1674
- if (stderr) {
1675
- console.warn(`Slicer Stderr: ${stderr}`); // Log stderr even on success
1670
+ try {
1671
+ await new Promise((resolve, reject) => {
1672
+ const process = execFile(slicerPath, args, launch.env ? { env: launch.env } : {}, (error, stdout, stderr) => {
1673
+ if (stalled && error) {
1674
+ reject(stalledSlicerError(slicerType, stallSeconds));
1676
1675
  }
1677
- resolve();
1678
- }
1679
- });
1680
- // Optional: Add listeners for stdout/stderr for real-time progress if slicer provides it
1681
- // process.stdout?.on('data', (data) => { console.error(`Slicer stdout: ${data}`); });
1682
- // process.stderr?.on('data', (data) => { console.error(`Slicer stderr: ${data}`); });
1683
- // Check for cancellation periodically
1684
- const checkCancel = setInterval(() => {
1685
- if (!this.activeOperations.get(operationId)) {
1686
- clearInterval(checkCancel);
1687
- try {
1688
- process.kill(); // Attempt to kill the slicer process
1689
- reject(new Error("Slicing operation cancelled"));
1676
+ else if (error) {
1677
+ console.error(`Slicer Error: ${error.message}`);
1678
+ console.error(`Slicer Stderr: ${stderr}`);
1679
+ const slicerResult = cliResult ? readCliResult(cliResult) : undefined;
1680
+ reject(new SlicerRunError(describeSlicerFailure(error, stdout, stderr, cliResult), slicerResult));
1690
1681
  }
1691
- catch (killError) {
1692
- console.error("Error attempting to kill slicer process:", killError);
1693
- reject(new Error("Slicing operation cancelled, but failed to kill process."));
1682
+ else {
1683
+ console.error(`Slicer Stdout: ${stdout}`);
1684
+ if (stderr) {
1685
+ console.warn(`Slicer Stderr: ${stderr}`); // Log stderr even on success
1686
+ }
1687
+ resolve();
1694
1688
  }
1695
- }
1696
- }, 500);
1697
- process.on('exit', () => clearInterval(checkCancel));
1698
- process.on('error', () => clearInterval(checkCancel)); // Ensure interval cleared on process error too
1699
- });
1689
+ });
1690
+ // Optional: Add listeners for stdout/stderr for real-time progress if slicer provides it
1691
+ // process.stdout?.on('data', (data) => { console.error(`Slicer stdout: ${data}`); });
1692
+ // process.stderr?.on('data', (data) => { console.error(`Slicer stderr: ${data}`); });
1693
+ // Check for cancellation periodically
1694
+ const checkCancel = setInterval(() => {
1695
+ if (!this.activeOperations.get(operationId)) {
1696
+ clearInterval(checkCancel);
1697
+ try {
1698
+ process.kill(); // Attempt to kill the slicer process
1699
+ reject(new Error("Slicing operation cancelled"));
1700
+ }
1701
+ catch (killError) {
1702
+ console.error("Error attempting to kill slicer process:", killError);
1703
+ reject(new Error("Slicing operation cancelled, but failed to kill process."));
1704
+ }
1705
+ }
1706
+ }, 500);
1707
+ process.on('exit', () => clearInterval(checkCancel));
1708
+ process.on('error', () => clearInterval(checkCancel)); // Ensure interval cleared on process error too
1709
+ watchForStall(process, stallSeconds, () => {
1710
+ stalled = true;
1711
+ console.error(`${slicerType} used no CPU and wrote nothing for ${stallSeconds} s; stopping it as waiting on a dialog.`);
1712
+ try {
1713
+ process.kill('SIGKILL');
1714
+ }
1715
+ catch { /* its exit is reported through the callback */ }
1716
+ });
1717
+ });
1718
+ }
1719
+ finally {
1720
+ await launch.cleanup();
1721
+ }
1700
1722
  }
1701
1723
  if (!this.activeOperations.get(operationId)) {
1702
1724
  // This check might be redundant if the promise rejected on kill, but good safety
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "bambu-printer-mcp",
3
- "version": "1.1.83",
3
+ "version": "1.1.85",
4
4
  "description": "MCP server for Bambu Lab 3D printers with STL manipulation, slicing, and print management",
5
5
  "main": "dist/index.js",
6
6
  "repository": {
@@ -48,9 +48,9 @@
48
48
  "author": "David Montgomery",
49
49
  "license": "GPL-2.0",
50
50
  "dependencies": {
51
- "@modelcontextprotocol/sdk": "^1.32.1",
51
+ "@modelcontextprotocol/sdk": "^1.32.2",
52
52
  "bambu-node": "3.22.21",
53
- "basic-ftp": "^6.2.3",
53
+ "basic-ftp": "^6.2.6",
54
54
  "dotenv": "^16.3.1",
55
55
  "jszip": "^3.10.2",
56
56
  "mqtt": "^5.16.1",
@@ -5,7 +5,7 @@ import {cameraNumber} from "./camera-tools.js";
5
5
  import {cameraFrameParser, cameraAuth} from "./camera-wire.js";
6
6
  import { createHash } from "node:crypto";
7
7
  import { controlReply, refusedControlMessage, type ControlReply } from "../control-reply.js";
8
- import { isFinishedP1SJob, isCancelledX2DJob, readFreshPrinterStatus } from "../safety/printer-state.js";
8
+ import { isFinishedIdleJob, isCancelledX2DJob, readFreshPrinterStatus } from "../safety/printer-state.js";
9
9
  import fs from "node:fs/promises";
10
10
  import { createReadStream, readFileSync, existsSync, mkdirSync, writeFileSync, renameSync, rmSync } from "node:fs";
11
11
  import path from "node:path";
@@ -790,7 +790,7 @@ export class BambuImplementation {
790
790
 
791
791
  private finishedJobIdentity(status: any): string | undefined {
792
792
  const raw = status.raw;
793
- return raw.gcode_state === "FINISH" || (isCancelledX2DJob(raw, String(status.model ?? "")) || isFinishedP1SJob(raw, String(status.model ?? "")))
793
+ return raw.gcode_state === "FINISH" || (isCancelledX2DJob(raw, String(status.model ?? "")) || isFinishedIdleJob(raw, String(status.model ?? "")))
794
794
  ? printJobIdentity(raw)
795
795
  : undefined;
796
796
  }
package/src/refusal.ts CHANGED
@@ -1,16 +1,19 @@
1
1
  import { AsyncLocalStorage } from "node:async_hooks";
2
2
 
3
3
  /**
4
- * A printer refusal with a stable diagnostic code, retained for existing clients.
5
- * Counterpart uses structuredContent.printOutcome for dispatch truth, never
6
- * these firmware-specific codes or the message.
4
+ * A refusal with a stable code, returned as structuredContent.code on the tool's error, so clients such as
5
+ * Counterpart act on the code instead of matching the message (whose words, HMS numbers, firmware and slicer
6
+ * details change). None of them starts a print. Whether a print command was sent is dispatch truth: clients
7
+ * read structuredContent.printOutcome for it, never these codes or the message.
7
8
  *
8
9
  * - printer-command-rejected: the printer refused the print command itself (for Bambu, HMS 0500-0500-0001-0007,
9
10
  * MQTT command verification); the file was uploaded and the command sent, but nothing is printing.
10
11
  * - printer-not-ready: the printer isn't in a state that can start a print (busy, paused, failed, unknown).
11
12
  * - printer-upload-failed: the print file didn't reach the printer, so no print command was sent.
13
+ * - slicer-waiting-on-dialog: the slicer stopped working (no CPU, no output) as it does while a window waits for an
14
+ * answer, and was stopped; nothing was sliced or sent. Not the slicer's verdict on the model: no slicer_report.
12
15
  */
13
- export const REFUSAL_CODES = ["printer-command-rejected", "printer-not-ready", "printer-upload-failed"] as const;
16
+ export const REFUSAL_CODES = ["printer-command-rejected", "printer-not-ready", "printer-upload-failed", "slicer-waiting-on-dialog"] as const;
14
17
  export type RefusalCode = (typeof REFUSAL_CODES)[number];
15
18
 
16
19
  export class PrinterRefusal extends Error {
@@ -20,6 +23,14 @@ export class PrinterRefusal extends Error {
20
23
  }
21
24
  }
22
25
 
26
+ /** A slicer stopped because it waited on a dialog (src/slicer/slicer-launch.ts); carries slicer-waiting-on-dialog. */
27
+ export class SlicerStalled extends PrinterRefusal {
28
+ constructor(message: string) {
29
+ super("slicer-waiting-on-dialog", message);
30
+ this.name = "SlicerStalled";
31
+ }
32
+ }
33
+
23
34
  /** counterpart/1 dispatch-tool errors describe dispatch truth independently of firmware-specific codes. */
24
35
  export type PrintOutcome = "not-sent" | "unknown" | "rejected";
25
36
  const printDispatch = new AsyncLocalStorage<{ attempted: boolean }>();
@@ -142,11 +142,17 @@ export function isCancelledX2DJob(raw: Record<string, any>, model: string): bool
142
142
  finiteNumber(raw.print_error) === 0 && finiteNumber(raw.fail_reason) === 0x0300400c &&
143
143
  [raw.gcode_file, raw.subtask_name].some(value => typeof value === "string" && value.trim().length > 0);
144
144
  }
145
- /** Bambu Studio 2.8.2.61 marks FAILED as finished. Limit P1S recovery to
145
+ /** Models observed retaining FAILED for a named prior job while explicitly reporting
146
+ * idle with no print error and no HMS: P1S (#87) and A1 firmware 01.08.01.00 after a
147
+ * user-stopped job. Add a model only with that hardware evidence. */
148
+ export const FINISHED_WHEN_FAILED_IDLE_MODELS: ReadonlySet<string> = new Set(["p1s", "a1"]);
149
+ /** Bambu Studio 2.8.2.61 marks FAILED as finished. Limit recovery to the models above and
146
150
  * a named prior job explicitly reporting idle, no print error and no HMS.
147
151
  * Dispatch rechecks the observed job identity. */
148
- export function isFinishedP1SJob(raw: Record<string, any>, model: string): boolean {
149
- return normalizeModel(model) === "p1s" && raw.gcode_state === "FAILED" && raw.print_type === "idle" &&
152
+ export function isFinishedIdleJob(raw: Record<string, any>, model: string): boolean {
153
+ const normalized = normalizeModel(model);
154
+ return normalized !== undefined && FINISHED_WHEN_FAILED_IDLE_MODELS.has(normalized) &&
155
+ raw.gcode_state === "FAILED" && raw.print_type === "idle" &&
150
156
  finiteNumber(raw.print_error) === 0 && Array.isArray(raw.hms) && raw.hms.length === 0 &&
151
157
  [raw.gcode_file, raw.subtask_name].some(value => typeof value === "string" && value.trim().length > 0);
152
158
  }
@@ -338,7 +344,7 @@ export function isPauseNotice(raw: Record<string, any>, requireIdle: boolean): b
338
344
  }
339
345
  function validateErrors(raw: Record<string,any>, requireIdle: boolean, serial: string, model: string) {
340
346
  const state = typeof raw.gcode_state === "string" ? raw.gcode_state.toUpperCase() : "UNKNOWN";
341
- const terminal = isCancelledX2DJob(raw, model) || isFinishedP1SJob(raw, model);
347
+ const terminal = isCancelledX2DJob(raw, model) || isFinishedIdleJob(raw, model);
342
348
  if (requireIdle && !["IDLE","FINISH"].includes(state) && !terminal) throw new PrinterRefusal("printer-not-ready", `Printer state ${state} is not safely idle.`);
343
349
  if (!requireIdle && !["IDLE","FINISH","RUNNING","PAUSE"].includes(state) && !terminal) throw new Error(`Printer state ${state} is unknown or failed.`);
344
350
  if (finiteNumber(raw.print_error) !== 0 && !isPauseNotice(raw, requireIdle)) throw new Error("Printer reports a print error or did not report its error state.");
@@ -0,0 +1,149 @@
1
+ import { execFile, type ChildProcess } from "node:child_process";
2
+ import fs from "node:fs";
3
+ import path from "node:path";
4
+ import { SlicerStalled } from "../refusal.js";
5
+
6
+ /**
7
+ * How a Bambu-compatible slicer CLI is launched so that it can't block on per-user AppKit launch state, and how a
8
+ * slicer that blocks anyway is noticed.
9
+ *
10
+ * Bambu Studio's command line opens a hidden GLFW window to draw plate thumbnails for --export-3mf (Bambu Studio
11
+ * 02.08.02.61 src/BambuStudio.cpp:6231-6259; OrcaSlicer and FULU's OrcaSlicer-bambulab inherit that code). The
12
+ * window starts NSApplication, and AppKit's window restoration then reads the person's crash history from
13
+ * ~/Library/Application Support/CrashReporter/<executable>_<hardware UUID>.plist. When that history says the app
14
+ * crashed while restoring windows, AppKit raises its modal "reopen windows?" alert, and the slicer waits on it at 0%
15
+ * CPU forever. Stopping it never answers the alert, so the next slice waits again.
16
+ *
17
+ * The CLI reads nothing else from the home folder: it takes its profiles from its own bundle (resources_dir(),
18
+ * BambuStudio.cpp:8325-8328) or from the files this server passes, its temporary files from TMPDIR
19
+ * (BambuStudio.cpp:1558-1559), and it sets no data directory unless --datadir is given (BambuStudio.cpp:8363-8367).
20
+ * So each slice gets a fresh, empty home of its own through CFFIXED_USER_HOME, under this server's TEMP_DIR, which
21
+ * AppKit honours for that history. Its preferences still come from the person's own (cfprefsd ignores
22
+ * CFFIXED_USER_HOME) and HOME is unchanged, so nothing else the slicer or this server reads moves.
23
+ */
24
+
25
+ /** Slicer types launched from a local Bambu-compatible CLI binary. */
26
+ const BAMBU_CLI_TYPES = new Set(["bambustudio", "orcaslicer", "orcaslicer-bambulab"]);
27
+
28
+ export interface SlicerLaunch {
29
+ /** The environment for the slicer process (undefined: inherit this server's). */
30
+ env?: NodeJS.ProcessEnv;
31
+ /** Seconds without CPU or output after which the slice is stopped and reported (watchForStall); 0: never. */
32
+ stallSeconds: number;
33
+ /** Removes this launch's home folder. */
34
+ cleanup(): Promise<void>;
35
+ }
36
+
37
+ /**
38
+ * The launch for one slice. On macOS a Bambu-compatible CLI gets its own empty home folder (always: an inherited
39
+ * CFFIXED_USER_HOME is replaced, since a home that held a stalled slice may hold the history that stalled it), and
40
+ * is watched for stalls. A new folder each slice, not one kept in the data folder, so no crash history can build up
41
+ * in it. Elsewhere nothing changes: no AppKit, and a slicer there may run behind a wrapper (AppImage, Flatpak) whose
42
+ * own CPU says nothing about the slicer's.
43
+ */
44
+ export async function prepareSlicerLaunch(slicerType: string, tempDir: string, platform: NodeJS.Platform = process.platform): Promise<SlicerLaunch> {
45
+ if (!BAMBU_CLI_TYPES.has(slicerType) || platform !== "darwin") return { stallSeconds: 0, cleanup: async () => {} };
46
+ await fs.promises.mkdir(tempDir, { recursive: true });
47
+ const home = await fs.promises.mkdtemp(path.join(tempDir, "slicer-home-"));
48
+ return {
49
+ env: { ...process.env, CFFIXED_USER_HOME: home },
50
+ stallSeconds: slicerStallSeconds(),
51
+ cleanup: () => fs.promises.rm(home, { recursive: true, force: true }).catch(() => undefined),
52
+ };
53
+ }
54
+
55
+ const DEFAULT_STALL_SECONDS = 20;
56
+
57
+ /**
58
+ * Seconds a slicer may use no CPU and write nothing before it is treated as waiting on a dialog
59
+ * (SLICER_STALL_SECONDS, 1-3600; 0 turns the check off). A slice is never idle that long: it computes or writes.
60
+ */
61
+ export function slicerStallSeconds(raw = process.env.SLICER_STALL_SECONDS): number {
62
+ const text = raw?.trim();
63
+ if (!text) return DEFAULT_STALL_SECONDS;
64
+ const value = Number(text);
65
+ return Number.isFinite(value) && value >= 0 && value <= 3600 ? value : DEFAULT_STALL_SECONDS;
66
+ }
67
+
68
+ /** "[[dd-]hh:]mm:ss[.cc]" from ps -o time= (macOS: m:ss.cc; Linux: [dd-]hh:mm:ss), in seconds. */
69
+ export function parseCpuTime(text: string): number | undefined {
70
+ const match = /^\s*(?:(\d+)-)?((?:\d+:){0,2}\d+(?:\.\d+)?)\s*$/.exec(text);
71
+ if (!match) return undefined;
72
+ const seconds = match[2].split(":").reduce((total, part) => total * 60 + Number(part), 0);
73
+ return (match[1] ? Number(match[1]) * 86400 : 0) + seconds;
74
+ }
75
+
76
+ /** The process's CPU time so far, in seconds, or undefined when it can't be read (Windows, an exited process). */
77
+ async function cpuSeconds(pid: number): Promise<number | undefined> {
78
+ if (process.platform === "win32") return undefined;
79
+ if (process.platform === "linux") {
80
+ try {
81
+ // utime and stime, fields 14 and 15, after the parenthesised command name (which may hold spaces).
82
+ const stat = await fs.promises.readFile(`/proc/${pid}/stat`, "utf8");
83
+ const fields = stat.slice(stat.lastIndexOf(")") + 2).split(" ");
84
+ return (Number(fields[11]) + Number(fields[12])) / 100;
85
+ } catch { return undefined; }
86
+ }
87
+ return new Promise(resolve => {
88
+ execFile("/bin/ps", ["-o", "time=", "-p", String(pid)], { timeout: 5_000 }, (error, stdout) => {
89
+ resolve(error ? undefined : parseCpuTime(stdout));
90
+ });
91
+ });
92
+ }
93
+
94
+ /** CPU seconds under which a poll counts as idle: a slicing CLI uses far more, a blocked one none. */
95
+ const IDLE_CPU_SECONDS = 0.05;
96
+
97
+ /**
98
+ * Calls onStall once when the child has used no CPU and written nothing to stdout or stderr for `seconds`, counted
99
+ * in consecutive polls (so a Mac that sleeps meanwhile doesn't count the sleep). It starts counting only after the
100
+ * child has shown it is running (output or CPU), and does nothing where CPU time can't be read. Returns a stop
101
+ * function; it also stops when the child exits.
102
+ */
103
+ export function watchForStall(child: ChildProcess, seconds: number, onStall: () => void): () => void {
104
+ if (!seconds || child.pid === undefined || process.platform === "win32") return () => {};
105
+ const pid = child.pid;
106
+ const pollMs = Math.min(2_000, (seconds * 1000) / 4);
107
+ const pollsNeeded = Math.ceil((seconds * 1000) / pollMs);
108
+ let output = false, started = false, idlePolls = 0, lastCpu: number | undefined, stopped = false, polling = false;
109
+ const sawOutput = () => { output = true; };
110
+ child.stdout?.on("data", sawOutput);
111
+ child.stderr?.on("data", sawOutput);
112
+ const timer = setInterval(async () => {
113
+ if (polling || stopped) return;
114
+ polling = true;
115
+ try {
116
+ const cpu = await cpuSeconds(pid);
117
+ if (stopped || cpu === undefined) return;
118
+ const busy = output || lastCpu === undefined || cpu - lastCpu >= IDLE_CPU_SECONDS;
119
+ if (output || cpu >= IDLE_CPU_SECONDS) started = true;
120
+ output = false;
121
+ lastCpu = cpu;
122
+ idlePolls = busy || !started ? 0 : idlePolls + 1;
123
+ // A slicer that exited meanwhile finished; its exit, not a stall, is reported.
124
+ if (idlePolls >= pollsNeeded && child.exitCode === null && child.signalCode === null) { stop(); onStall(); }
125
+ } finally { polling = false; }
126
+ }, pollMs);
127
+ const stop = () => {
128
+ if (stopped) return;
129
+ stopped = true;
130
+ clearInterval(timer);
131
+ child.stdout?.off("data", sawOutput);
132
+ child.stderr?.off("data", sawOutput);
133
+ };
134
+ child.once("exit", stop);
135
+ child.once("error", stop);
136
+ return stop;
137
+ }
138
+
139
+ const SLICER_NAMES: Record<string, string> = { bambustudio: "Bambu Studio", orcaslicer: "OrcaSlicer", "orcaslicer-bambulab": "OrcaSlicer" };
140
+
141
+ /** The failure for a slicer stopped by watchForStall. */
142
+ export function stalledSlicerError(slicerType: string, seconds: number): SlicerStalled {
143
+ const name = SLICER_NAMES[slicerType] ?? "The slicer";
144
+ return new SlicerStalled(
145
+ `${name} stopped slicing: it used no processor time and wrote nothing for ${seconds} seconds, which is what it does ` +
146
+ `while it waits on a window nobody can answer, such as a question it asks after a crash. It was stopped, and nothing ` +
147
+ `was sent to the printer. Open ${name} once, answer any question it shows, quit it, then slice again.`
148
+ );
149
+ }
@@ -19,6 +19,7 @@ import { applyProcessOverrides, type ProcessOverrides } from '../slicer/process-
19
19
  import { profileJsonFiles } from '../slicer/profile-files.js';
20
20
  import { materializeOrcaProfilesRoot, stageOrcaCliProfiles } from '../slicer/orca-profile-cache.js';
21
21
  import { sliceWithOrcaApi, validateRemoteSliceOptions } from '../slicer/remote-slicer.js';
22
+ import { prepareSlicerLaunch, stalledSlicerError, watchForStall } from '../slicer/slicer-launch.js';
22
23
 
23
24
  /** How long a slice's folder (its sliced file and result.json) is kept: a day, then a later slice removes it. */
24
25
  const SLICE_FOLDER_LIFETIME_MS = 24 * 60 * 60 * 1000;
@@ -2067,10 +2068,17 @@ export class STLManipulator extends EventEmitter {
2067
2068
  if (progressCallback) progressCallback(20, `Executing slicer: ${slicerPath} ${args.join(' ')}`);
2068
2069
  console.error(`Executing: ${slicerPath} ${args.join(' ')}`);
2069
2070
 
2071
+ // A Bambu-compatible CLI runs in a home folder of its own (macOS), and one that waits on a dialog is stopped
2072
+ // and reported instead of waiting forever (src/slicer/slicer-launch.ts).
2073
+ const launch = await prepareSlicerLaunch(slicerType, this.tempDir);
2074
+ const stallSeconds = launch.stallSeconds;
2075
+ let stalled = false;
2070
2076
  // Execute the slicer
2071
- await new Promise<void>((resolve, reject) => {
2072
- const process = execFile(slicerPath, args, (error, stdout, stderr) => {
2073
- if (error) {
2077
+ try { await new Promise<void>((resolve, reject) => {
2078
+ const process = execFile(slicerPath, args, launch.env ? { env: launch.env } : {}, (error, stdout, stderr) => {
2079
+ if (stalled && error) {
2080
+ reject(stalledSlicerError(slicerType, stallSeconds));
2081
+ } else if (error) {
2074
2082
  console.error(`Slicer Error: ${error.message}`);
2075
2083
  console.error(`Slicer Stderr: ${stderr}`);
2076
2084
  const slicerResult = cliResult ? readCliResult(cliResult) : undefined;
@@ -2104,8 +2112,13 @@ export class STLManipulator extends EventEmitter {
2104
2112
 
2105
2113
  process.on('exit', () => clearInterval(checkCancel));
2106
2114
  process.on('error', () => clearInterval(checkCancel)); // Ensure interval cleared on process error too
2115
+ watchForStall(process, stallSeconds, () => {
2116
+ stalled = true;
2117
+ console.error(`${slicerType} used no CPU and wrote nothing for ${stallSeconds} s; stopping it as waiting on a dialog.`);
2118
+ try { process.kill('SIGKILL'); } catch { /* its exit is reported through the callback */ }
2119
+ });
2107
2120
 
2108
- });
2121
+ }); } finally { await launch.cleanup(); }
2109
2122
  }
2110
2123
 
2111
2124
  if (!this.activeOperations.get(operationId)) {