bambu-printer-mcp 1.1.37 → 1.1.38
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- package/CONTRIBUTORS.md +1 -0
- package/dist/safety/print-file.js +2 -2
- package/package.json +1 -1
- package/src/safety/print-file.ts +2 -2
package/CONTRIBUTORS.md
CHANGED
|
@@ -6,6 +6,7 @@ Thank you to everyone who builds, tests, reports problems, and shares real print
|
|
|
6
6
|
|
|
7
7
|
| Contributor | Contribution |
|
|
8
8
|
| --- | --- |
|
|
9
|
+
| [ZombieLurker](https://github.com/ZombieLurker) | Reports and diagnoses the unused-nozzle preheat rejection for OrcaSlicer 2.4.2 single-filament H2D jobs in [#73](https://github.com/DMontgomery40/bambu-printer-mcp/issues/73), supplies the exact startup commands and environment, and verifies a local inspection fix. H2D Pro coverage is independently supported by its official profile; no physical printing is claimed by this release. |
|
|
9
10
|
| [MorganFreeeman](https://github.com/MorganFreeeman) | Reports in [#67](https://github.com/DMontgomery40/bambu-printer-mcp/issues/67) that every H2D print stopped on stock HS01 nozzles. Supplies idle and mid-print firmware 01.04.00.00 nozzle reports showing a permanent `stat: 1` with `sn: "N/A"`, proposes keeping the check narrow to nozzles without an identity chip, and points out the misleading declined-confirmation advice and the missing settings-table entries. Maintainer validation uses their reports in regressions; no H2D hardware was available. |
|
|
10
11
|
| [Aaron Roberts (aaroberts)](https://github.com/aaroberts) | Diagnoses FULU's Linux host exit 101 and its working-directory library loading in [#68](https://github.com/DMontgomery40/bambu-printer-mcp/issues/68), reports both upstream as [FULU #50](https://github.com/FULU-Foundation/OrcaSlicer-bambulab/issues/50) and [#51](https://github.com/FULU-Foundation/OrcaSlicer-bambulab/issues/51), and shares a working configuration: the `cat` wrapper, absolute plug-in paths, the FULU GUI's session file for cloud login, and the required 02.05.02.5x plug-in. Reports cloud printing on two P1S printers with 1.1.33. The server now sets the library paths and explains exit 101. The host fixes themselves remain with FULU. |
|
|
11
12
|
| [bwees](https://github.com/bwees) | Reports and fixes missing non-preset vendor data in [OrcaSlicer #16700](https://github.com/OrcaSlicer/OrcaSlicer/issues/16700) and [#16706](https://github.com/OrcaSlicer/OrcaSlicer/pull/16706), restoring the authoritative BBL CLI matrix required by cache-based MCP slicing. |
|
|
@@ -640,8 +640,8 @@ export async function inspectPrintFile(filePath, options) {
|
|
|
640
640
|
for (const key of args.keys())
|
|
641
641
|
if (!'SLT'.includes(key))
|
|
642
642
|
fail(`unsupported M620.17 parameter ${key}`);
|
|
643
|
-
if (args.get('L') === -1 &&
|
|
644
|
-
// OrcaSlicer's X2D start G-code preheats a nozzle with no assigned
|
|
643
|
+
if (args.get('L') === -1 && ['x2d', 'h2d', 'h2dpro'].includes(model)) {
|
|
644
|
+
// OrcaSlicer's X2D/H2D/H2D Pro start G-code preheats a nozzle with no assigned
|
|
645
645
|
// filament (L-1) for toolhead-offset calibration; Bambu Studio writes
|
|
646
646
|
// L0 there. No project filament is selected, so check the target
|
|
647
647
|
// against the hardware limit and every declared material, like other
|
package/package.json
CHANGED
package/src/safety/print-file.ts
CHANGED
|
@@ -462,8 +462,8 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
|
|
|
462
462
|
const args=parameters(argumentsText);
|
|
463
463
|
if(!args.has('S') || !args.has('L') || !args.has('T') || !Number.isInteger(args.get('T')) || args.get('T')!<0 || args.get('T')!>=nozzleDiameters.length) fail('unsupported M620.17 nozzle/material temperature mapping');
|
|
464
464
|
for(const key of args.keys()) if(!'SLT'.includes(key)) fail(`unsupported M620.17 parameter ${key}`);
|
|
465
|
-
if(args.get('L')===-1 &&
|
|
466
|
-
// OrcaSlicer's X2D start G-code preheats a nozzle with no assigned
|
|
465
|
+
if(args.get('L')===-1 && ['x2d','h2d','h2dpro'].includes(model)) {
|
|
466
|
+
// OrcaSlicer's X2D/H2D/H2D Pro start G-code preheats a nozzle with no assigned
|
|
467
467
|
// filament (L-1) for toolhead-offset calibration; Bambu Studio writes
|
|
468
468
|
// L0 there. No project filament is selected, so check the target
|
|
469
469
|
// against the hardware limit and every declared material, like other
|