bambu-printer-mcp 1.1.25 → 1.1.26

package/CONTRIBUTORS.md

@@ -7,7 +7,8 @@ Thank you to everyone who builds, tests, reports problems, and shares real print
 | Contributor | Contribution |
 | --- | --- |
 | [Aleksei Popovich (alexpapay)](https://github.com/alexpapay) | Fixes cross-platform AMS profile resolution and packed P2S chamber status in [#43](https://github.com/DMontgomery40/bambu-printer-mcp/pull/43), contributes regressions, and supplies read-only Windows P2S/AMS 2 Pro status and local slicing evidence. No physical print is claimed for this contribution. |
-| [travismcashan](https://github.com/travismcashan) | Reports stock X2D material-switch and runout-purge rejection, misleading unchecked confirmation, and stdout diagnostics in [#44](https://github.com/DMontgomery40/bambu-printer-mcp/issues/44). Supplies exact preset syntax and firmware evidence, then reports a clean physical X2D cube print with a local workaround; maintainer validation remains isolated and mocked. |
+| [Adam (@adamkaplan)](https://github.com/adamkaplan) | Identifies the reversed H2C/H2D Pro serial prefixes in [#47](https://github.com/DMontgomery40/bambu-printer-mcp/issues/47), verifies corrected H2C status locally, and isolates the official H2C startup commands and config-block marker failure in [#48](https://github.com/DMontgomery40/bambu-printer-mcp/issues/48). Provides exact Bambu Studio version/template hash and unsafe-file reproductions; maintainer validation is offline and mocked. |
+| [travismcashan](https://github.com/travismcashan) | Reports stock X2D material-switch and runout-purge rejection, misleading unchecked confirmation, and stdout diagnostics in [#44](https://github.com/DMontgomery40/bambu-printer-mcp/issues/44). Supplies exact preset syntax and firmware evidence, then reports a clean physical X2D cube print with a local workaround; maintainer validation remains isolated and mocked. Reports the accepted native job and subsequent helper teardown crash in [#46](https://github.com/DMontgomery40/bambu-printer-mcp/issues/46), with completed-print and macOS crash evidence informing result preservation and duplicate-print warnings. |
 | [nitpreet22](https://github.com/nitpreet22) | Fixes rejection of the stock A1/A1 mini `M109 H` startup waits in [#41](https://github.com/DMontgomery40/bambu-printer-mcp/pull/41), contributes temperature and model regressions, and supplies Windows Bambu Studio profile and real sliced A1 job inspection evidence. Their physical print used Bambu Studio, not this MCP change. |
 | [Steavie (steavie)](https://github.com/steavie) | Reports the reversed A1/A1 mini serial prefixes in [#39](https://github.com/DMontgomery40/bambu-printer-mcp/issues/39), with A1 status and configuration evidence that identifies the status and fresh-identity regression. |
 | [JaviOFC](https://github.com/JaviOFC) | Reports the X2D identity rejection in [#36](https://github.com/DMontgomery40/bambu-printer-mcp/issues/36) and supplies current firmware, connection-mode, status-field, serial-prefix, and cloud-job evidence showing that `model_id` can contain a print-job identifier while `model` correctly identifies the printer. |

package/README.md

@@ -932,7 +932,7 @@ The npm package and desktop bundle include `native/bambu-native-print.cpp` and `
 
 For X2D, `print_3mf` defaults to `connection_mode: "bambu_native"`; legacy `lan_mqtt_ftps` requests are redirected to it. Supply `ams_slots`, a complete project-level `ams_mapping`, or `auto_match_ams: true`. An external-spool job requires explicit `use_ams: false`. Raw `ams_mapping2` and nozzle/extra-option overrides are rejected before dispatch; the server derives both AMS representations from the checked structured mapping. Model/nozzle/material inspection, fresh printer-state checks, and human preflight apply before the helper receives a private snapshot. The native helper requests fresh shared printer-state authorization immediately before each print submission, including a certificate retry, and before checked heating, resume, or error-clearing commands; custom helpers must support this handshake. Stop and heater-off remain available without preflight. Native upload-only requests use the same all-plate inspection as FTPS uploads. They accept `project_name`, `preset_name`, `bed_type`, and an existing `plate_index`; AMS, nozzle, and calibration print options are rejected. Use `print_3mf` for checked print settings.
 
-The helper waits for connection/certificate exchange and retries only the initial `-4030` send once. Previous hardware testing reached `RUNNING` on X2D; this revision is validated with mocked transport regressions and clean installs, not a new physical print. `bambu_connect` is an optional macOS handoff for user review in Bambu Connect and does not start a print. Native task, heater, and error controls retain the common safety checks; raw controls cannot bypass them. Request cancellation, stop, and heater-off interrupt pending native helpers; the server waits for process exit before releasing a checked file. A command already sent to the printer cannot be recalled by cancelling the request, so verify printer state before retrying.
+The helper waits for connection/certificate exchange and retries only the initial `-4030` send once. Rebuild the helper after upgrading to receive the teardown fix. A successful dispatch receipt ends the helper before plug-in cleanup can turn an accepted job into an error. If an older/custom helper crashes after dispatch, the server reports uncertainty: check the printer state and job name before retrying, because resending can duplicate a print. Previous hardware testing reached `RUNNING` on X2D; this revision is validated with mocked transport regressions and clean installs, not a new physical print. `bambu_connect` is an optional macOS handoff for user review in Bambu Connect and does not start a print. Native task, heater, and error controls retain the common safety checks; raw controls cannot bypass them. Request cancellation, stop, and heater-off interrupt pending native helpers; the server waits for process exit before releasing a checked file. A command already sent to the printer cannot be recalled by cancelling the request, so verify printer state before retrying.
 
 #### x2d_native_control
 

package/dist/bambu-native.js

@@ -180,7 +180,7 @@ function runNativeHelper(mode, env, timeoutMs, onUpdate, execution = {}) {
                 reject(failure);
                 return;
             }
-            if (needsAuthorization && code === 0 && (authorizing || authorizedAttempts === 0)) {
+            if (needsAuthorization && (code === 0 || updates.includes("native_print result=0") || stdout.trim() === "native_print result=0") && (authorizing || authorizedAttempts === 0)) {
                 reject(new Error("Native helper exited without completed dispatch authorization."));
                 return;
             }
@@ -189,7 +189,7 @@ function runNativeHelper(mode, env, timeoutMs, onUpdate, execution = {}) {
                 updates.push(trailing);
                 onUpdate?.(trailing);
             }
-            resolve({ resultCode: code ?? (signal ? 1 : 0), updates, stderr });
+            resolve({ resultCode: code ?? (signal ? 1 : 0), signal, authorizedAttempts, updates, stderr });
         });
     });
 }
@@ -551,6 +551,10 @@ export async function printWithBambuNative(options, onUpdate, execution) {
         BAMBU_NATIVE_TIMELAPSE: boolEnv(options.timelapse, false),
     }, 300000, onUpdate, execution);
     if (result.resultCode !== 0) {
+        const explicitRejection = result.updates.some(line => /^native_print result=-?[1-9]\d*$/.test(line));
+        if (result.authorizedAttempts > 0 && (result.updates.includes("native_print result=0") || (result.signal && !explicitRejection))) {
+            throw new Error("Bambu native print dispatch is uncertain: the printer may have accepted this job before the helper exited. Check printer status and the job name before retrying; do not automatically resend it.");
+        }
         const detail = [
             ...result.updates,
             ...(result.stderr ? [result.stderr.trim()] : []),

package/dist/printers/bambu.js

@@ -118,9 +118,9 @@ class TolerantBambuClient extends BambuClient {
             return "H2S";
         if (sn.startsWith("094"))
             return "H2D";
-        if (sn.startsWith("239"))
-            return "H2C";
         if (sn.startsWith("31B"))
+            return "H2C";
+        if (sn.startsWith("239"))
             return "H2DPRO";
         if (sn.startsWith("20P"))
             return "X2D";

package/dist/safety/print-file.js

@@ -80,7 +80,7 @@ function parameters(text, flags = '') {
     return result;
 }
 // Layer comments only close a startup exception; they can never enable one.
-const isLayerMarker = (line) => /^\s*;\s*(?:LAYER_CHANGE|CHANGE_LAYER|LAYER\s*:|layer num\/total_layer_count\s*:)/i.test(line);
+const isLayerMarker = (line) => /^\s*;\s*(?:(?:LAYER_CHANGE|CHANGE_LAYER)(?:\s|$)|LAYER\s*:|layer num\/total_layer_count\s*:)/i.test(line);
 function boundedX1ePurge(lines, index) {
     // Official X1E common flush: 50 mm at 200 mm/min, followed immediately by
     // lowering the target. No dwell, XY extrusion, repeated block or open-ended
@@ -331,6 +331,10 @@ export async function inspectPrintFile(filePath, options) {
     let previous;
     let maxNozzleTemperature = 0, maxBedTemperature = 0, maxChamberTemperature = 0, commandCount = 0;
     let depositionStarted = false, commonFlushUsed = false;
+    // Bound the H2C vendor forms to its one explicit executable startup block.
+    const startupStarts = lines.flatMap((line, index) => /^\s*;\s*EXECUTABLE_BLOCK_START\s*$/i.test(line) ? [index] : []);
+    const startupEnds = lines.flatMap((line, index) => /^\s*;\s*MACHINE_START_GCODE_END\s*$/i.test(line) ? [index] : []);
+    const h2cStartup = (index) => model === 'h2c' && !depositionStarted && startupStarts.length === 1 && startupEnds.length === 1 && index > startupStarts[0] && index < startupEnds[0];
     const heat = (component, value, position, allMaterials = false, startupPurge = false) => {
         const affected = allMaterials || position === undefined ? materials.map((_, index) => index) : [requirePosition(position)];
         if (component === 'nozzle' && startupPurge)
@@ -356,11 +360,14 @@ export async function inspectPrintFile(filePath, options) {
     };
     for (let index = 0; index < lines.length; index++) {
         try {
-            if (isLayerMarker(lines[index]))
+            if (isLayerMarker(lines[index]) || /^\s*;\s*MACHINE_START_GCODE_END\s*$/i.test(lines[index]))
                 closeStartupWindow();
             let line = stripComments(lines[index]);
             if (!line || line === '%')
                 continue;
+            // The official H2C template emits this literal separator without a semicolon.
+            if (line === '========== record data ==========' && h2cStartup(index))
+                continue;
             line = line.replace(/^N\d+\s*/i, '').replace(/\*\d+\s*$/, '');
             if (/[{}\[\]#]/.test(line))
                 fail('unresolved dynamic command syntax');
@@ -408,6 +415,31 @@ export async function inspectPrintFile(filePath, options) {
                 // Official A1 and A1 mini start G-code waits with M109 S<target> H<limit>
                 // (S25 H140, S100 H170, S220 H300). H is not a heater target: S stays the
                 // checked target, so H is accepted only within those vendor bounds.
+                if (args.has('O')) {
+                    // H2C's exact all-hotend preheat offset is relative to the declared
+                    // first-layer targets. Check every base and derived target, never use
+                    // editable maxima or an unchecked offset as thermal evidence.
+                    if (code !== 'M104' || !h2cStartup(index) || args.size !== 2 || args.get('O') !== -80 || !Number.isNaN(args.get('A')))
+                        fail('unsupported H2C startup offset parameters');
+                    const targets = consistent(metadataValues(metadata, ['nozzle_temperature_initial_layer']), value => {
+                        const values = list(value);
+                        return values.length === materials.length && values.every(v => NUMBER.test(v) && Number.isFinite(Number(v))) ? values.map(Number) : undefined;
+                    }, 'first-layer nozzle temperature');
+                    for (let position = 0; position < targets.length; position++) {
+                        validateTemperature('nozzle', targets[position], model, [materials[position]]);
+                        const preheat = Math.max(0, targets[position] - 80);
+                        validateTemperature('nozzle', preheat, model, [materials[position]]);
+                        nozzleTarget = Math.max(nozzleTarget, preheat);
+                        maxNozzleTemperature = Math.max(maxNozzleTemperature, preheat);
+                    }
+                    continue;
+                }
+                if (args.has('D')) {
+                    if (!['M140', 'M190'].includes(code) || !h2cStartup(index) || args.size !== 1)
+                        fail('unsupported H2C startup bed parameters');
+                    heat('bed', args.get('D'), undefined, true);
+                    continue;
+                }
                 const vendorWait = code === 'M109' && ['a1', 'a1mini'].includes(model);
                 for (const key of args.keys())
                     if (!'SRTA'.includes(key) && !(key === 'H' && vendorWait))
@@ -430,7 +462,9 @@ export async function inspectPrintFile(filePath, options) {
                         heat(component, args.get(key), position, args.has('T') || args.has('A'), commonFlush);
             }
             else if (code === 'M620' || code === 'M621') {
-                const args = parameters(argumentsText, model === 'x2d' ? 'MAB' : 'MA');
+                const args = parameters(argumentsText, model === 'x2d' ? 'MAB' : model === 'h2c' ? 'MAN' : 'MA');
+                if (args.has('N') && (code !== 'M620' || !h2cStartup(index) || args.size !== 1 || !Number.isNaN(args.get('N'))))
+                    fail('unsupported H2C startup hotend-remap flag');
                 // X2D templates use B as a bare material-switch flag, never a target.
                 if (args.has('B') && (model !== 'x2d' || !Number.isNaN(args.get('B'))))
                     fail('unsupported material-switch B flag');
@@ -483,10 +517,27 @@ export async function inspectPrintFile(filePath, options) {
             else if (/^G150\./.test(code) && /T/i.test(argumentsText)) {
                 fail(`unsupported thermal-affecting wipe command ${code}`);
             }
+            else if (code === 'M620.14') {
+                const args = parameters(argumentsText);
+                // H2C tower coordinates include the rear wipe area outside object bounds.
+                if (!h2cStartup(index) || args.size !== 2 || !['X', 'Y'].every(key => args.has(key) && Number.isFinite(args.get(key)) && args.get(key) >= 0 && args.get(key) <= 350))
+                    fail('unsupported H2C startup tower parameters');
+            }
+            else if (model === 'h2c' && ['G383', 'G383.3', 'G383.7'].includes(code) && /U/i.test(argumentsText)) {
+                const args = parameters(argumentsText);
+                const expected = code === 'G383.7' ? 'UJ' : code === 'G383.3' ? 'UL' : 'OUL';
+                if (!h2cStartup(index) || args.size !== expected.length || [...args.keys()].some(key => !expected.includes(key)) || args.get('U') !== 140 ||
+                    (code === 'G383.7' && args.get('J') !== 0) || (code === 'G383' && args.get('O') !== 2))
+                    fail('unsupported H2C startup probing parameters');
+                const position = args.has('L') ? requirePosition(args.get('L')) : active;
+                heat('nozzle', args.get('U'), position);
+            }
             else if (code === 'G383' || code === 'G383.3') {
                 // Bambu probing routines carry nozzle temperature in T and optionally
                 // the project filament position in L (including the H2D G383.3 form).
                 const args = parameters(argumentsText);
+                if (args.has('U'))
+                    fail('unsupported G383 temperature parameter U outside H2C startup');
                 if (code === 'G383.3' && (!args.has('T') || [...args.keys()].some(key => !'TL'.includes(key))))
                     fail('unsupported G383.3 temperature parameters');
                 const position = args.has('L') ? requirePosition(args.get('L')) : active;

package/dist/safety/printer-state.js

@@ -6,7 +6,7 @@ const MODEL_IDS = {
     N2S: "A1", A1M: "A1 Mini", C11: "P1P", C12: "P1S", C13: "X1E", "BL-P001": "X1C", "BL-P002": "X1",
 };
 const SERIAL_MODELS = {
-    "093": "H2S", "094": "H2D", "239": "H2C", "31B": "H2D Pro", "20P": "X2D",
+    "093": "H2S", "094": "H2D", "31B": "H2C", "239": "H2D Pro", "20P": "X2D",
     "00M": "X1C", "00W": "X1", "03W": "X1E", "01S": "P1P", "01P": "P1S", "22E": "P2S", "039": "A1", "030": "A1 Mini",
 };
 function object(value) {

package/native/bambu-native-print.cpp

@@ -725,6 +725,11 @@ void runOperation(NativeApi &api, NativeOperation operation) {
         }
     }
     outputLine(std::string(uploadOnly ? "native_upload" : "native_print") + " result=" + std::to_string(result));
+    // A one-shot print helper has finished dispatch. Plug-in worker teardown can
+    // crash after acceptance; let the OS reclaim it without changing that result.
+    // outputLine flushes the receipt before exiting. Upload/control paths retain
+    // their existing cleanup, and no dispatched print is replayed here.
+    if (!uploadOnly) std::_Exit(result == 0 ? 0 : 20);
     destroyAgent();
     if (result != 0) std::exit(20);
 }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "bambu-printer-mcp",
-  "version": "1.1.25",
+  "version": "1.1.26",
   "description": "MCP server for Bambu Lab 3D printers with STL manipulation, slicing, and print management",
   "main": "dist/index.js",
   "repository": {

package/patches/bambu-node+3.22.21.patch

@@ -29,4 +29,4 @@ index 916e924..6eb81e9 100644
  {if activate_air_filtration[current_extruder] && support_air_filtration}
  M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} 
 -{endif}`],filament_id:"GFL01",filament_flow_ratio:["0.98"],filament_vendor:["Polymaker"]}};var W;(function(e){e[e.PRINTING=0]="PRINTING",e[e.BED_LEVELING=1]="BED_LEVELING",e[e.HEATBED_PREHEATING=2]="HEATBED_PREHEATING",e[e.XY_MECH_MODE_SWEEP=3]="XY_MECH_MODE_SWEEP",e[e.CHANGE_MATERIAL=4]="CHANGE_MATERIAL",e[e.M400_PAUSE=5]="M400_PAUSE",e[e.FILAMENT_RUNOUT_PAUSE=6]="FILAMENT_RUNOUT_PAUSE",e[e.HOTEND_HEATING=7]="HOTEND_HEATING",e[e.EXTRUDE_COMPENSATION_SCAN=8]="EXTRUDE_COMPENSATION_SCAN",e[e.BED_SCAN=9]="BED_SCAN",e[e.FIRST_LAYER_SCAN=10]="FIRST_LAYER_SCAN",e[e.BE_SURFACE_TYPT_IDENTIFICATION=11]="BE_SURFACE_TYPT_IDENTIFICATION",e[e.SCANNER_EXTRINSIC_PARA_CALI=12]="SCANNER_EXTRINSIC_PARA_CALI",e[e.TOOLHEAD_HOMING=13]="TOOLHEAD_HOMING",e[e.NOZZLE_TIP_CLEANING=14]="NOZZLE_TIP_CLEANING",e[e.EXTRUDER_TEMP_PROTECT_CALI=15]="EXTRUDER_TEMP_PROTECT_CALI",e[e.USER_PAUSE=16]="USER_PAUSE",e[e.TOOLHEAD_SHELL_OFF_PAUSE=17]="TOOLHEAD_SHELL_OFF_PAUSE",e[e.SCANNER_LASER_PARA_CALI=18]="SCANNER_LASER_PARA_CALI",e[e.EXTRUDER_ABSOLUTE_FLOW_CALI=19]="EXTRUDER_ABSOLUTE_FLOW_CALI",e[e.HOTEND_TEMPERATURE_ERROR_PAUSE=20]="HOTEND_TEMPERATURE_ERROR_PAUSE",e[e.HEATED_BED_TEMPERATURE_ERROR_PAUSE=21]="HEATED_BED_TEMPERATURE_ERROR_PAUSE",e[e.FILAMENT_UNLOADING=22]="FILAMENT_UNLOADING",e[e.SKIP_STEP_PAUSE=23]="SKIP_STEP_PAUSE",e[e.FILAMENT_LOADING=24]="FILAMENT_LOADING",e[e.MOTOR_NOISE_CALIBRATION=25]="MOTOR_NOISE_CALIBRATION",e[e.AMS_LOST_PAUSE=26]="AMS_LOST_PAUSE",e[e.HEAT_BREAK_FAN_PAUSE=27]="HEAT_BREAK_FAN_PAUSE",e[e.CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE=28]="CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE",e[e.CHAMBER_COOLING=29]="CHAMBER_COOLING",e[e.USER_INSERT_GCODE_PAUSE=30]="USER_INSERT_GCODE_PAUSE",e[e.MOTOR_NOISE_SHOWOFF=31]="MOTOR_NOISE_SHOWOFF",e[e.NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE=32]="NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE",e[e.CUTTER_ERROR_PAUSE=33]="CUTTER_ERROR_PAUSE",e[e.FIRST_LAYER_ERROR_PAUSE=34]="FIRST_LAYER_ERROR_PAUSE",e[e.NOZZLE_CLOG_PAUSE=35]="NOZZLE_CLOG_PAUSE"})(W||(W={}));var X;(function(e){e.SILENT="1",e.NORMAL="2",e.SPORT="3",e.LUDICROUS="4"})(X||(X={}));var V;(function(e){e[e.IDLE=0]="IDLE",e[e.READING=1]="READING",e[e.GCODE_TRANS=2]="GCODE_TRANS",e[e.GCODE_RUNNING=3]="GCODE_RUNNING",e[e.ASSISTANT=4]="ASSISTANT",e[e.SWITCH_FILAMENT=5]="SWITCH_FILAMENT",e[e.HAS_FILAMENT=6]="HAS_FILAMENT"})(V||(V={}));var $;(function(e){e.DOWNLOADING="DOWNLOADING",e.UPGRADE_REQUEST="UPGRADE_REQUEST",e.PRE_FLASH_START="PRE_FLASH_START",e.PRE_FLASH_SUCCESS="PRE_FLASH_SUCCESS"})($||($={}));var Z;(function(e){e.UPGRADE_SUCCESS="UPGRADE_SUCCESS",e.DOWNLOAD_FAIL="DOWNLOAD_FAIL",e.FLASH_FAIL="FLASH_FAIL",e.PRE_FLASH_FAIL="PRE_FLASH_FAIL",e.UPGRADE_FAIL="UPGRADE_FAIL"})(Z||(Z={}));var Y;(function(e){e[e.UpgradeNoError=0]="UpgradeNoError",e[e.UpgradeDownloadFailed=1]="UpgradeDownloadFailed",e[e.UpgradeVerifyFailed=2]="UpgradeVerifyFailed",e[e.UpgradeFlashFailed=3]="UpgradeFlashFailed",e[e.UpgradePrinting=4]="UpgradePrinting"})(Y||(Y={}));var K;(function(e){e[e.UNAVAILABLE=0]="UNAVAILABLE",e[e.IDLE=1]="IDLE",e[e.UPGRADING=2]="UPGRADING",e[e.UPGRADE_FINISHED=3]="UPGRADE_FINISHED"})(K||(K={}));var Q;(function(e){e.PLA="PLA",e.ABS="ABS",e.TPU="TPU",e.PC="PC",e.ASA="ASA",e.PA_CF="PA-CF",e.PA6_CF="PA6-CF",e.PET_CF="PET-CF",e.PETG="PETG",e.PETG_CF="PETG-CF",e.PLA_AERO="PLA-AERO",e.PLA_CF="PLA-CF",e.PPA_CF="PPA-CF",e.PPA_GF="PPA-GF",e.PA="PA",e.HIPS="HIPS",e.PPS="PPS",e.PPS_CF="PPS-CF",e.PVA="PVA",e.PLA_S="PLA-S",e.PA_S="PLA-S"})(Q||(Q={}));function Je(e){return k[e]??null}r(Je,"getFilamentConfig");function h(e){return e.command==="push_status"&&Object.keys(e).length>=40}r(h,"isPushAllCommand");function ee(e){return e.command==="gcode_line"&&!!e?.param?.startsWith("M106")}r(ee,"isUpdateFanCommand");function te(e){return e.command==="push_status"&&e.hasOwnProperty("lights_report")}r(te,"isUpdateLightCommand");function _e(e){return e.command==="push_status"&&(e.hasOwnProperty("spd_lvl")||e.hasOwnProperty("spd_mag"))}r(_e,"isUpdateSpeedCommand");function re(e){return e.command===e.command}r(re,"isUpdateStateCommand");function ae(e){return e.command==="gcode_line"&&!!(e?.param?.startsWith("M104")||e?.param?.startsWith("M140"))}r(ae,"isUpdateTempCommand");function g(e){return!!e?.mc_print&&!!e?.mc_print?.command&&["push_info"].includes(e.mc_print.command)}r(g,"isMCPrintMessage");function ht(e){return e.command==="push_info"}r(ht,"isPushInfoCommand");function gt(e){let[,_,t,l]=e.param.match(/^\[(.+?)](?:\[(.+?)])?\s*(.+)$/)??[];return{sequenceId:Number(e.sequence_id),category:_,subcategory:t,content:l,rawParam:e.param}}r(gt,"getCleanPushInfoCommand");function x(e){return e.command==="get_version"}r(x,"isGetVersionCommand");function z(e){return!!e?.info&&!!e?.info?.command&&["get_version"].includes(e.info.command)}r(z,"isInfoMessage");var E=class E extends f{constructor({fileName:t}){super({param:t});n(this,"category","print");n(this,"command","gcode_file");n(this,"ownsResponse",q)}};r(E,"GCodeFileCommand");var ie=E;var S=class S extends d{constructor({gcodes:t}){super(t);n(this,"command","gcode_line");n(this,"ownsResponse",j)}};r(S,"GCodeLineCommand");var ne=S;var G=class G extends f{constructor(){super();n(this,"category","info");n(this,"command","get_version");n(this,"ownsResponse",x)}};r(G,"GetVersionCommand");var b=G;var M=class M extends f{constructor(){super();n(this,"category","pushing");n(this,"command","pushall");n(this,"ownsResponse",h)}};r(M,"PushAllCommand");var c=M;var le;(function(e){e[e.PART_COOLING_FAN=1]="PART_COOLING_FAN",e[e.AUXILIARY_FAN=2]="AUXILIARY_FAN",e[e.CHAMBER_FAN=3]="CHAMBER_FAN"})(le||(le={}));var L=class L extends d{constructor({fan:t,speed:l}){super([`M106 P${t.toString()} S${255*l/100}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ee)}};r(L,"UpdateFanCommand");var me=L;var F=class F extends f{constructor({light:t,mode:l,loopOptions:a={led_on_time:0,led_off_time:0,loop_times:0,interval_time:0}}){super({led_node:t,led_mode:l,...a});n(this,"category","system");n(this,"command","ledctrl");n(this,"ownsResponse",te)}};r(F,"UpdateLightCommand");var oe=F;var N=class N extends f{constructor({speed:t}){super({param:t.toString()});n(this,"category","print");n(this,"command","print_speed");n(this,"ownsResponse",_e)}};r(N,"UpdateSpeedCommand");var pe=N;var C=class C extends f{constructor({state:t}){super();n(this,"category","print");n(this,"command");n(this,"ownsResponse",re);this.command=t}};r(C,"UpdateStateCommand");var se=C;var fe;(function(e){e.BED="M140",e.EXTRUDER="M104"})(fe||(fe={}));var T=class T extends d{constructor({part:t,temperature:l}){super([`${t} S${l}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ae)}};r(T,"UpdateTempCommand");var ue=T;var p;(function(e){e.X1C="X1C",e.X1="X1",e.X1E="X1E",e.P1P="P1P",e.P1S="P1S",e.A1="A1",e.A1M="A1M"})(p||(p={}));import{createId as xe}from"@paralleldrive/cuid2";var ze=new RegExp(/\.[^/.]+$/),R=class R{constructor(_,t,l,a=new Date){n(this,"_jobData");let o=[p.P1P,p.P1S].includes(l);this._jobData={id:xe(),printerId:t,printerModel:l,name:_.subtask_name.replace(ze,""),fileName:_.subtask_name,gcodeName:_.gcode_file,jobOrigin:_.print_type,totalLayerNumber:_.total_layer_num,totalPrintTime:_.mc_remaining_time,status:_.gcode_state,stage:_.stg_cur,percentDone:_.mc_percent,layerNumber:_.layer_num,remainingTime:_.mc_remaining_time,skippedObjects:_.s_obj,statusHistory:[{status:_.gcode_state,changedAt:a}],speedLevelHistory:[{speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:a}],printingStageHistory:[{stage:_.stg_cur,changedAt:a}],temperatureHistory:[{bedTemp:_.bed_temper,bedTargetTemp:_.bed_target_temper,interiorTemp:o?_.frame_temper:_.chamber_temper,nozzleTemp:_.nozzle_temper,nozzleTargetTemp:_.nozzle_target_temper,changedAt:a}],tempLastUpdatedAt:new Date,errorCodes:_.hms.map(m=>({attr:m.attr,code:m.code,thrownAt:a,layerNumber:_.layer_num})),createdAt:a}}update(_){if(!this._jobData)return;let t=this._jobData,l=new Date,a=[p.P1P,p.P1S].includes(this._jobData.printerModel);_.gcode_state&&t.statusHistory.at(-1)?.status!==_.gcode_state&&t.statusHistory.push({status:_.gcode_state,changedAt:l}),_.spd_lvl&&_.spd_mag&&t.speedLevelHistory.at(-1)?.speedLevel!==_.spd_lvl&&t.speedLevelHistory.push({speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:l}),_.stg_cur&&t.printingStageHistory.at(-1)?.stage!==_.stg_cur&&t.printingStageHistory.push({stage:_.stg_cur,changedAt:l});let o=!!(_.bed_temper||_.bed_target_temper||(a?_.frame_temper:_.chamber_temper)||_.nozzle_temper||_.nozzle_target_temper),m=t.tempLastUpdatedAt.getTime()+5e3<l.getTime();if(o&&m){let s=a?_.frame_temper:_.chamber_temper,u=t.temperatureHistory.at(-1);t.temperatureHistory.push({bedTemp:_.bed_temper??u.bedTemp,bedTargetTemp:_.bed_target_temper??u.bedTargetTemp,interiorTemp:s??u.interiorTemp,nozzleTemp:_.nozzle_temper??u.nozzleTemp,nozzleTargetTemp:_.nozzle_target_temper??u.nozzleTargetTemp,changedAt:l}),t.tempLastUpdatedAt=l}let i={status:_.gcode_state??t.status,stage:_.stg_cur??t.stage,percentDone:_.mc_percent??t.percentDone,layerNumber:_.layer_num??t.layerNumber,remainingTime:_.mc_remaining_time??t.remainingTime,skippedObjects:_.s_obj??t.skippedObjects,errorCodes:_.hms?.map((s,u)=>({attr:s.attr??t.errorCodes[u].attr,code:s.code??t.errorCodes[u].code,thrownAt:l??t.errorCodes[u].thrownAt,layerNumber:_.layer_num??t.errorCodes[u].layerNumber}))??t.errorCodes};this._jobData={...this._jobData,...i}}get data(){return this._jobData}};r(R,"Job");var w=R;import*as ce from"mqtt";import*as ye from"eventemitter3";import{createId as be}from"@paralleldrive/cuid2";function I(e){return new Promise(_=>setTimeout(_,e))}r(I,"sleep");function O(e,_){let t={},l=r((a,o,m)=>{for(let i in o){let s=o[i],u=a[i];if(!(i in a&&JSON.stringify(a[i])===JSON.stringify(o[i]))){if(typeof s=="object"&&s!==null&&u!==null&&!Array.isArray(s)){m[i]=m[i]||{},l(a[i],o[i],m[i]);continue}m[i]=o[i]}}},"checkDifferences");return l(e,_,t),t}r(O,"subtractObject");var D=class D extends ye.EventEmitter{constructor(t){super();n(this,"clientOptions");n(this,"id");n(this,"mqttClient");n(this,"config");n(this,"_printerData");n(this,"_printerStatus");n(this,"jobHistory");n(this,"currentJob");this.clientOptions=t,this.id=be(),this.mqttClient=void 0,this._printerData={modules:[],model:void 0},this._printerStatus="OFFLINE",this.jobHistory=[],this.currentJob=null,this.config={host:t.host,port:t.port??8883,accessToken:t.accessToken,serialNumber:t.serialNumber,throwOnOfflineCommands:t.throwOnOfflineCommands??!1,reconnectInterval:t.reconnectInterval??1e3,connectTimeout:t.connectTimeout??2e3,keepAlive:t.keepAlive??20},this.jobHistory=t.jobHistory??[],this.currentJob=t.currentJob??null}emit(t,...l){return super.emit(t,...l)}off(t,l){return super.off(t,l),this}once(t,l){return super.once(t,l),this}on(t,l){return super.on(t,l),this}async connectMQTT(){return new Promise((t,l)=>{if(this.mqttClient)throw new Error("Can't establish a new connection while running another one!");this.mqttClient=ce.connect(`mqtts://${this.config.host}:${this.config.port}`,{username:"bblp",password:this.config.accessToken,reconnectPeriod:this.clientOptions.reconnectInterval,connectTimeout:this.clientOptions.connectTimeout,keepalive:this.clientOptions.keepAlive,resubscribe:!0,rejectUnauthorized:!1}),this.mqttClient.on("connect",async(...a)=>{await this.onConnect(...a),this.emit("client:connect"),t()}),this.mqttClient.on("disconnect",()=>{this.emit("client:disconnect",!1),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("offline",()=>{this.emit("client:disconnect",!0),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("message",(a,o)=>this.emit("rawMessage",a,o)),this.mqttClient.on("error",a=>{this.emit("client:error",a),l(a)})})}async connect(){return await Promise.all([this.connectMQTT()])}async disconnect(t=!1,l){return new Promise(a=>this.mqttClient?.end(t,l,a))}subscribe(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error(`Unable to subscribe to topic "${t}" while disconnected from printer!`);return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");this.mqttClient.subscribe(t,m=>{if(m)return a(`Error subscribing to topic '${t}': ${m.message}`)});let o=r(async(m,i)=>{m===t&&await this.onMessage(i.toString(),t)},"listener");this.mqttClient.on("message",o),l()})}async executeCommand(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error("Unable to send commands while disconnected from printer!");return new Promise((l,a)=>{t.invoke(this).catch(m=>a(m));let o=setTimeout(()=>{a(new Error("Command execution timed out after 5 seconds."))},5e3);this.on("rawMessage",(m,i)=>{let s=JSON.parse(i.toString()),u=Object.keys(s)[0];if(!(z(s)||g(s)||y(s)))return;let P=s[u];P?.command&&t.ownsResponse(P)&&(clearTimeout(o),l(P))})})}async onConnect(t){await this.subscribe(`device/${this.config.serialNumber}/report`),await I(1e3),await this.executeCommand(new b),(this._printerData.model===p.P1P||this._printerData.model===p.P1S||this._printerData.model===p.A1||this._printerData.model===p.A1M)&&(await this.executeCommand(new c),setInterval(async()=>{await this.executeCommand(new c)},5*60*1e3))}async onMessage(t,l){let a=JSON.parse(t),o=Object.keys(a)[0];if(z(a)||g(a)||y(a)){if(y(a)&&(this.emit("message",l,o,a.print),(h(a.print)||J(a.print))&&(this._printerData={...this._printerData,...a.print},this.emit("printer:dataUpdate",this._printerData,a.print),a.print.gcode_state&&a.print.gcode_state!==this._printerStatus))){let m=this._printerStatus,i=a.print.gcode_state;if(this.emit("printer:statusUpdate",m,i),(i==="PREPARE"||i==="SLICING")&&(i="IDLE"),(m==="PREPARE"||m==="SLICING")&&(m="RUNNING"),(m==="IDLE"||m==="FINISH"||m==="FAILED")&&i==="RUNNING")this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=new w(this._printerData,this.id,this._printerData.model),this.emit("job:start",this.currentJob);else if(m==="RUNNING"&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))i==="FINISH"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"SUCCESS"):i==="FAILED"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"FAILED"):i==="IDLE"&&this.currentJob!==null&&this.emit("job:finish",this.currentJob,"UNEXPECTED"),this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=null;else if(m==="RUNNING"&&i==="PAUSE")this.currentJob&&this.emit("job:pause",this.currentJob,!1);else if(m==="PAUSE"&&i==="RUNNING")this.currentJob&&this.emit("job:unpause",this.currentJob);else if(m==="OFFLINE"&&i==="PAUSE")this.emit("job:offlineRecovery",this.currentJob);else if(!(m==="OFFLINE"&&i==="RUNNING")){if(!((m==="IDLE"||m==="OFFLINE")&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))){if(!((m==="FINISH"||i==="FAILED")&&i==="IDLE")){if(m!==i)throw new Error("Edge case detected while updating printer status!")}}}if(this._printerStatus=a.print.gcode_state,this.currentJob){let s=this.currentJob?.data;this.currentJob.update(a.print),this.emit("job:update",this.currentJob,O(s,this.currentJob.data))}}if(g(a)&&this.emit("message",l,o,a.print),z(a)&&(this.emit("message",l,o,a.info),x(a.info))){let m=[...new Set([...this._printerData.modules,...a.info.module])];this._printerData.modules=m,this.emit("printer:dataUpdate",this._printerData,{modules:m});let i=this._printerData.modules.find(s=>s.name==="ota");if(!i)throw new Error("OTA module version data not found, unable to determine printer model!");if(i.sn.startsWith("00M"))this._printerData.model=p.X1C;else if(i.sn.startsWith("00W"))this._printerData.model=p.X1;else if(i.sn.startsWith("03W"))this._printerData.model=p.X1E;else if(i.sn.startsWith("01S"))this._printerData.model=p.P1P;else if(i.sn.startsWith("01P"))this._printerData.model=p.P1S;else if(i.sn.startsWith("030"))this._printerData.model=p.A1;else if(i.sn.startsWith("039"))this._printerData.model=p.A1M;else throw new Error("Printer model not supported!");this.emit("printer:dataUpdate",this._printerData,{model:this._printerData.model})}}}publish(t){return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");let o=typeof t=="string"?t:JSON.stringify(t),m=`device/${this.config.serialNumber}/request`;this.mqttClient.publish(m,o,i=>{if(i)return a(`Error publishing to topic '${m}': ${i.message}`);l()})})}get data(){return this._printerData}get status(){return this._printerStatus}};r(D,"BambuClient");var de=D;export{f as AbstractCommand,V as AmsRFIDStatus,de as BambuClient,le as Fan,Q as FilamentType,d as GCodeCommand,ie as GCodeFileCommand,ne as GCodeLineCommand,b as GetVersionCommand,w as Job,W as PrintStage,p as PrinterModel,c as PushAllCommand,X as SpeedLevel,me as UpdateFanCommand,oe as UpdateLightCommand,pe as UpdateSpeedCommand,se as UpdateStateCommand,ue as UpdateTempCommand,K as UpgradeDisplayState,Y as UpgradeErrorCode,Z as UpgradeStatusFinishState,$ as UpgradeStatusProgressState,gt as getCleanPushInfoCommand,Je as getFilamentConfig,j as isGCodeLineCommand,q as isGcodeFileCommand,x as isGetVersionCommand,z as isInfoMessage,g as isMCPrintMessage,y as isPrintMessage,Oe as isProjectFileCommand,h as isPushAllCommand,ht as isPushInfoCommand,J as isPushStatusCommand,ee as isUpdateFanCommand,te as isUpdateLightCommand,_e as isUpdateSpeedCommand,re as isUpdateStateCommand,ae as isUpdateTempCommand};
-+{endif}`],filament_id:"GFL01",filament_flow_ratio:["0.98"],filament_vendor:["Polymaker"]}};var W;(function(e){e[e.PRINTING=0]="PRINTING",e[e.BED_LEVELING=1]="BED_LEVELING",e[e.HEATBED_PREHEATING=2]="HEATBED_PREHEATING",e[e.XY_MECH_MODE_SWEEP=3]="XY_MECH_MODE_SWEEP",e[e.CHANGE_MATERIAL=4]="CHANGE_MATERIAL",e[e.M400_PAUSE=5]="M400_PAUSE",e[e.FILAMENT_RUNOUT_PAUSE=6]="FILAMENT_RUNOUT_PAUSE",e[e.HOTEND_HEATING=7]="HOTEND_HEATING",e[e.EXTRUDE_COMPENSATION_SCAN=8]="EXTRUDE_COMPENSATION_SCAN",e[e.BED_SCAN=9]="BED_SCAN",e[e.FIRST_LAYER_SCAN=10]="FIRST_LAYER_SCAN",e[e.BE_SURFACE_TYPT_IDENTIFICATION=11]="BE_SURFACE_TYPT_IDENTIFICATION",e[e.SCANNER_EXTRINSIC_PARA_CALI=12]="SCANNER_EXTRINSIC_PARA_CALI",e[e.TOOLHEAD_HOMING=13]="TOOLHEAD_HOMING",e[e.NOZZLE_TIP_CLEANING=14]="NOZZLE_TIP_CLEANING",e[e.EXTRUDER_TEMP_PROTECT_CALI=15]="EXTRUDER_TEMP_PROTECT_CALI",e[e.USER_PAUSE=16]="USER_PAUSE",e[e.TOOLHEAD_SHELL_OFF_PAUSE=17]="TOOLHEAD_SHELL_OFF_PAUSE",e[e.SCANNER_LASER_PARA_CALI=18]="SCANNER_LASER_PARA_CALI",e[e.EXTRUDER_ABSOLUTE_FLOW_CALI=19]="EXTRUDER_ABSOLUTE_FLOW_CALI",e[e.HOTEND_TEMPERATURE_ERROR_PAUSE=20]="HOTEND_TEMPERATURE_ERROR_PAUSE",e[e.HEATED_BED_TEMPERATURE_ERROR_PAUSE=21]="HEATED_BED_TEMPERATURE_ERROR_PAUSE",e[e.FILAMENT_UNLOADING=22]="FILAMENT_UNLOADING",e[e.SKIP_STEP_PAUSE=23]="SKIP_STEP_PAUSE",e[e.FILAMENT_LOADING=24]="FILAMENT_LOADING",e[e.MOTOR_NOISE_CALIBRATION=25]="MOTOR_NOISE_CALIBRATION",e[e.AMS_LOST_PAUSE=26]="AMS_LOST_PAUSE",e[e.HEAT_BREAK_FAN_PAUSE=27]="HEAT_BREAK_FAN_PAUSE",e[e.CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE=28]="CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE",e[e.CHAMBER_COOLING=29]="CHAMBER_COOLING",e[e.USER_INSERT_GCODE_PAUSE=30]="USER_INSERT_GCODE_PAUSE",e[e.MOTOR_NOISE_SHOWOFF=31]="MOTOR_NOISE_SHOWOFF",e[e.NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE=32]="NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE",e[e.CUTTER_ERROR_PAUSE=33]="CUTTER_ERROR_PAUSE",e[e.FIRST_LAYER_ERROR_PAUSE=34]="FIRST_LAYER_ERROR_PAUSE",e[e.NOZZLE_CLOG_PAUSE=35]="NOZZLE_CLOG_PAUSE"})(W||(W={}));var X;(function(e){e.SILENT="1",e.NORMAL="2",e.SPORT="3",e.LUDICROUS="4"})(X||(X={}));var V;(function(e){e[e.IDLE=0]="IDLE",e[e.READING=1]="READING",e[e.GCODE_TRANS=2]="GCODE_TRANS",e[e.GCODE_RUNNING=3]="GCODE_RUNNING",e[e.ASSISTANT=4]="ASSISTANT",e[e.SWITCH_FILAMENT=5]="SWITCH_FILAMENT",e[e.HAS_FILAMENT=6]="HAS_FILAMENT"})(V||(V={}));var $;(function(e){e.DOWNLOADING="DOWNLOADING",e.UPGRADE_REQUEST="UPGRADE_REQUEST",e.PRE_FLASH_START="PRE_FLASH_START",e.PRE_FLASH_SUCCESS="PRE_FLASH_SUCCESS"})($||($={}));var Z;(function(e){e.UPGRADE_SUCCESS="UPGRADE_SUCCESS",e.DOWNLOAD_FAIL="DOWNLOAD_FAIL",e.FLASH_FAIL="FLASH_FAIL",e.PRE_FLASH_FAIL="PRE_FLASH_FAIL",e.UPGRADE_FAIL="UPGRADE_FAIL"})(Z||(Z={}));var Y;(function(e){e[e.UpgradeNoError=0]="UpgradeNoError",e[e.UpgradeDownloadFailed=1]="UpgradeDownloadFailed",e[e.UpgradeVerifyFailed=2]="UpgradeVerifyFailed",e[e.UpgradeFlashFailed=3]="UpgradeFlashFailed",e[e.UpgradePrinting=4]="UpgradePrinting"})(Y||(Y={}));var K;(function(e){e[e.UNAVAILABLE=0]="UNAVAILABLE",e[e.IDLE=1]="IDLE",e[e.UPGRADING=2]="UPGRADING",e[e.UPGRADE_FINISHED=3]="UPGRADE_FINISHED"})(K||(K={}));var Q;(function(e){e.PLA="PLA",e.ABS="ABS",e.TPU="TPU",e.PC="PC",e.ASA="ASA",e.PA_CF="PA-CF",e.PA6_CF="PA6-CF",e.PET_CF="PET-CF",e.PETG="PETG",e.PETG_CF="PETG-CF",e.PLA_AERO="PLA-AERO",e.PLA_CF="PLA-CF",e.PPA_CF="PPA-CF",e.PPA_GF="PPA-GF",e.PA="PA",e.HIPS="HIPS",e.PPS="PPS",e.PPS_CF="PPS-CF",e.PVA="PVA",e.PLA_S="PLA-S",e.PA_S="PLA-S"})(Q||(Q={}));function Je(e){return k[e]??null}r(Je,"getFilamentConfig");function h(e){return e.command==="push_status"&&Object.keys(e).length>=40}r(h,"isPushAllCommand");function ee(e){return e.command==="gcode_line"&&!!e?.param?.startsWith("M106")}r(ee,"isUpdateFanCommand");function te(e){return e.command==="push_status"&&e.hasOwnProperty("lights_report")}r(te,"isUpdateLightCommand");function _e(e){return e.command==="push_status"&&(e.hasOwnProperty("spd_lvl")||e.hasOwnProperty("spd_mag"))}r(_e,"isUpdateSpeedCommand");function re(e){return e.command===e.command}r(re,"isUpdateStateCommand");function ae(e){return e.command==="gcode_line"&&!!(e?.param?.startsWith("M104")||e?.param?.startsWith("M140"))}r(ae,"isUpdateTempCommand");function g(e){return!!e?.mc_print&&!!e?.mc_print?.command&&["push_info"].includes(e.mc_print.command)}r(g,"isMCPrintMessage");function ht(e){return e.command==="push_info"}r(ht,"isPushInfoCommand");function gt(e){let[,_,t,l]=e.param.match(/^\[(.+?)](?:\[(.+?)])?\s*(.+)$/)??[];return{sequenceId:Number(e.sequence_id),category:_,subcategory:t,content:l,rawParam:e.param}}r(gt,"getCleanPushInfoCommand");function x(e){return e.command==="get_version"}r(x,"isGetVersionCommand");function z(e){return!!e?.info&&!!e?.info?.command&&["get_version"].includes(e.info.command)}r(z,"isInfoMessage");var E=class E extends f{constructor({fileName:t}){super({param:t});n(this,"category","print");n(this,"command","gcode_file");n(this,"ownsResponse",q)}};r(E,"GCodeFileCommand");var ie=E;var S=class S extends d{constructor({gcodes:t}){super(t);n(this,"command","gcode_line");n(this,"ownsResponse",j)}};r(S,"GCodeLineCommand");var ne=S;var G=class G extends f{constructor(){super();n(this,"category","info");n(this,"command","get_version");n(this,"ownsResponse",x)}};r(G,"GetVersionCommand");var b=G;var M=class M extends f{constructor(){super();n(this,"category","pushing");n(this,"command","pushall");n(this,"ownsResponse",h)}};r(M,"PushAllCommand");var c=M;var le;(function(e){e[e.PART_COOLING_FAN=1]="PART_COOLING_FAN",e[e.AUXILIARY_FAN=2]="AUXILIARY_FAN",e[e.CHAMBER_FAN=3]="CHAMBER_FAN"})(le||(le={}));var L=class L extends d{constructor({fan:t,speed:l}){super([`M106 P${t.toString()} S${255*l/100}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ee)}};r(L,"UpdateFanCommand");var me=L;var F=class F extends f{constructor({light:t,mode:l,loopOptions:a={led_on_time:0,led_off_time:0,loop_times:0,interval_time:0}}){super({led_node:t,led_mode:l,...a});n(this,"category","system");n(this,"command","ledctrl");n(this,"ownsResponse",te)}};r(F,"UpdateLightCommand");var oe=F;var N=class N extends f{constructor({speed:t}){super({param:t.toString()});n(this,"category","print");n(this,"command","print_speed");n(this,"ownsResponse",_e)}};r(N,"UpdateSpeedCommand");var pe=N;var C=class C extends f{constructor({state:t}){super();n(this,"category","print");n(this,"command");n(this,"ownsResponse",re);this.command=t}};r(C,"UpdateStateCommand");var se=C;var fe;(function(e){e.BED="M140",e.EXTRUDER="M104"})(fe||(fe={}));var T=class T extends d{constructor({part:t,temperature:l}){super([`${t} S${l}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ae)}};r(T,"UpdateTempCommand");var ue=T;var p;(function(e){e.X1C="X1C",e.X1="X1",e.X1E="X1E",e.P1P="P1P",e.P1S="P1S",e.P2S="P2S",e.H2S="H2S",e.H2D="H2D",e.H2C="H2C",e.H2DPRO="H2DPRO",e.A1="A1",e.A1M="A1M"})(p||(p={}));import{createId as xe}from"@paralleldrive/cuid2";var ze=new RegExp(/\.[^/.]+$/),R=class R{constructor(_,t,l,a=new Date){n(this,"_jobData");let o=[p.P1P,p.P1S].includes(l);this._jobData={id:xe(),printerId:t,printerModel:l,name:_.subtask_name.replace(ze,""),fileName:_.subtask_name,gcodeName:_.gcode_file,jobOrigin:_.print_type,totalLayerNumber:_.total_layer_num,totalPrintTime:_.mc_remaining_time,status:_.gcode_state,stage:_.stg_cur,percentDone:_.mc_percent,layerNumber:_.layer_num,remainingTime:_.mc_remaining_time,skippedObjects:_.s_obj,statusHistory:[{status:_.gcode_state,changedAt:a}],speedLevelHistory:[{speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:a}],printingStageHistory:[{stage:_.stg_cur,changedAt:a}],temperatureHistory:[{bedTemp:_.bed_temper,bedTargetTemp:_.bed_target_temper,interiorTemp:o?_.frame_temper:_.chamber_temper,nozzleTemp:_.nozzle_temper,nozzleTargetTemp:_.nozzle_target_temper,changedAt:a}],tempLastUpdatedAt:new Date,errorCodes:_.hms.map(m=>({attr:m.attr,code:m.code,thrownAt:a,layerNumber:_.layer_num})),createdAt:a}}update(_){if(!this._jobData)return;let t=this._jobData,l=new Date,a=[p.P1P,p.P1S].includes(this._jobData.printerModel);_.gcode_state&&t.statusHistory.at(-1)?.status!==_.gcode_state&&t.statusHistory.push({status:_.gcode_state,changedAt:l}),_.spd_lvl&&_.spd_mag&&t.speedLevelHistory.at(-1)?.speedLevel!==_.spd_lvl&&t.speedLevelHistory.push({speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:l}),_.stg_cur&&t.printingStageHistory.at(-1)?.stage!==_.stg_cur&&t.printingStageHistory.push({stage:_.stg_cur,changedAt:l});let o=!!(_.bed_temper||_.bed_target_temper||(a?_.frame_temper:_.chamber_temper)||_.nozzle_temper||_.nozzle_target_temper),m=t.tempLastUpdatedAt.getTime()+5e3<l.getTime();if(o&&m){let s=a?_.frame_temper:_.chamber_temper,u=t.temperatureHistory.at(-1);t.temperatureHistory.push({bedTemp:_.bed_temper??u.bedTemp,bedTargetTemp:_.bed_target_temper??u.bedTargetTemp,interiorTemp:s??u.interiorTemp,nozzleTemp:_.nozzle_temper??u.nozzleTemp,nozzleTargetTemp:_.nozzle_target_temper??u.nozzleTargetTemp,changedAt:l}),t.tempLastUpdatedAt=l}let i={status:_.gcode_state??t.status,stage:_.stg_cur??t.stage,percentDone:_.mc_percent??t.percentDone,layerNumber:_.layer_num??t.layerNumber,remainingTime:_.mc_remaining_time??t.remainingTime,skippedObjects:_.s_obj??t.skippedObjects,errorCodes:_.hms?.map((s,u)=>({attr:s.attr??t.errorCodes[u].attr,code:s.code??t.errorCodes[u].code,thrownAt:l??t.errorCodes[u].thrownAt,layerNumber:_.layer_num??t.errorCodes[u].layerNumber}))??t.errorCodes};this._jobData={...this._jobData,...i}}get data(){return this._jobData}};r(R,"Job");var w=R;import*as ce from"mqtt";import*as ye from"eventemitter3";import{createId as be}from"@paralleldrive/cuid2";function I(e){return new Promise(_=>setTimeout(_,e))}r(I,"sleep");function O(e,_){let t={},l=r((a,o,m)=>{for(let i in o){let s=o[i],u=a[i];if(!(i in a&&JSON.stringify(a[i])===JSON.stringify(o[i]))){if(typeof s=="object"&&s!==null&&u!==null&&!Array.isArray(s)){m[i]=m[i]||{},l(a[i],o[i],m[i]);continue}m[i]=o[i]}}},"checkDifferences");return l(e,_,t),t}r(O,"subtractObject");var D=class D extends ye.EventEmitter{constructor(t){super();n(this,"clientOptions");n(this,"id");n(this,"mqttClient");n(this,"config");n(this,"_printerData");n(this,"_printerStatus");n(this,"jobHistory");n(this,"currentJob");this.clientOptions=t,this.id=be(),this.mqttClient=void 0,this._printerData={modules:[],model:void 0},this._printerStatus="OFFLINE",this.jobHistory=[],this.currentJob=null,this.config={host:t.host,port:t.port??8883,accessToken:t.accessToken,serialNumber:t.serialNumber,throwOnOfflineCommands:t.throwOnOfflineCommands??!1,reconnectInterval:t.reconnectInterval??1e3,connectTimeout:t.connectTimeout??2e3,keepAlive:t.keepAlive??20},this.jobHistory=t.jobHistory??[],this.currentJob=t.currentJob??null}emit(t,...l){return super.emit(t,...l)}off(t,l){return super.off(t,l),this}once(t,l){return super.once(t,l),this}on(t,l){return super.on(t,l),this}async connectMQTT(){return new Promise((t,l)=>{if(this.mqttClient)throw new Error("Can't establish a new connection while running another one!");this.mqttClient=ce.connect(`mqtts://${this.config.host}:${this.config.port}`,{username:"bblp",password:this.config.accessToken,reconnectPeriod:this.clientOptions.reconnectInterval,connectTimeout:this.clientOptions.connectTimeout,keepalive:this.clientOptions.keepAlive,resubscribe:!0,rejectUnauthorized:!1}),this.mqttClient.on("connect",async(...a)=>{await this.onConnect(...a),this.emit("client:connect"),t()}),this.mqttClient.on("disconnect",()=>{this.emit("client:disconnect",!1),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("offline",()=>{this.emit("client:disconnect",!0),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("message",(a,o)=>this.emit("rawMessage",a,o)),this.mqttClient.on("error",a=>{this.emit("client:error",a),l(a)})})}async connect(){return await Promise.all([this.connectMQTT()])}async disconnect(t=!1,l){return new Promise(a=>this.mqttClient?.end(t,l,a))}subscribe(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error(`Unable to subscribe to topic "${t}" while disconnected from printer!`);return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");this.mqttClient.subscribe(t,m=>{if(m)return a(`Error subscribing to topic '${t}': ${m.message}`)});let o=r(async(m,i)=>{m===t&&await this.onMessage(i.toString(),t)},"listener");this.mqttClient.on("message",o),l()})}async executeCommand(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error("Unable to send commands while disconnected from printer!");return new Promise((l,a)=>{t.invoke(this).catch(m=>a(m));let o=setTimeout(()=>{a(new Error("Command execution timed out after 5 seconds."))},5e3);this.on("rawMessage",(m,i)=>{let s=JSON.parse(i.toString()),u=Object.keys(s)[0];if(!(z(s)||g(s)||y(s)))return;let P=s[u];P?.command&&t.ownsResponse(P)&&(clearTimeout(o),l(P))})})}async onConnect(t){await this.subscribe(`device/${this.config.serialNumber}/report`),await I(1e3),await this.executeCommand(new b),(this._printerData.model===p.P1P||this._printerData.model===p.P1S||this._printerData.model===p.P2S||this._printerData.model===p.A1||this._printerData.model===p.A1M)&&(await this.executeCommand(new c),setInterval(async()=>{await this.executeCommand(new c)},5*60*1e3))}async onMessage(t,l){let a=JSON.parse(t),o=Object.keys(a)[0];if(z(a)||g(a)||y(a)){if(y(a)&&(this.emit("message",l,o,a.print),(h(a.print)||J(a.print))&&(this._printerData={...this._printerData,...a.print},this.emit("printer:dataUpdate",this._printerData,a.print),a.print.gcode_state&&a.print.gcode_state!==this._printerStatus))){let m=this._printerStatus,i=a.print.gcode_state;if(this.emit("printer:statusUpdate",m,i),(i==="PREPARE"||i==="SLICING")&&(i="IDLE"),(m==="PREPARE"||m==="SLICING")&&(m="RUNNING"),(m==="IDLE"||m==="FINISH"||m==="FAILED")&&i==="RUNNING")this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=new w(this._printerData,this.id,this._printerData.model),this.emit("job:start",this.currentJob);else if(m==="RUNNING"&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))i==="FINISH"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"SUCCESS"):i==="FAILED"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"FAILED"):i==="IDLE"&&this.currentJob!==null&&this.emit("job:finish",this.currentJob,"UNEXPECTED"),this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=null;else if(m==="RUNNING"&&i==="PAUSE")this.currentJob&&this.emit("job:pause",this.currentJob,!1);else if(m==="PAUSE"&&i==="RUNNING")this.currentJob&&this.emit("job:unpause",this.currentJob);else if(m==="OFFLINE"&&i==="PAUSE")this.emit("job:offlineRecovery",this.currentJob);else if(!(m==="OFFLINE"&&i==="RUNNING")){if(!((m==="IDLE"||m==="OFFLINE")&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))){if(!((m==="FINISH"||i==="FAILED")&&i==="IDLE")){if(m!==i)void 0}}}if(this._printerStatus=a.print.gcode_state,this.currentJob){let s=this.currentJob?.data;this.currentJob.update(a.print),this.emit("job:update",this.currentJob,O(s,this.currentJob.data))}}if(g(a)&&this.emit("message",l,o,a.print),z(a)&&(this.emit("message",l,o,a.info),x(a.info))){let m=[...new Set([...this._printerData.modules,...a.info.module])];this._printerData.modules=m,this.emit("printer:dataUpdate",this._printerData,{modules:m});let i=this._printerData.modules.find(s=>s.name==="ota");if(!i)return;if(i.sn.startsWith("00M"))this._printerData.model=p.X1C;else if(i.sn.startsWith("00W"))this._printerData.model=p.X1;else if(i.sn.startsWith("03W"))this._printerData.model=p.X1E;else if(i.sn.startsWith("01S"))this._printerData.model=p.P1P;else if(i.sn.startsWith("01P"))this._printerData.model=p.P1S;else if(i.sn.startsWith("22E"))this._printerData.model=p.P2S;else if(i.sn.startsWith("039"))this._printerData.model=p.A1;else if(i.sn.startsWith("030"))this._printerData.model=p.A1M;else if(i.sn.startsWith("093"))this._printerData.model=p.H2S;else if(i.sn.startsWith("094"))this._printerData.model=p.H2D;else if(i.sn.startsWith("239"))this._printerData.model=p.H2C;else if(i.sn.startsWith("31B"))this._printerData.model=p.H2DPRO;this.emit("printer:dataUpdate",this._printerData,{model:this._printerData.model})}}}publish(t){return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");let o=typeof t=="string"?t:JSON.stringify(t),m=`device/${this.config.serialNumber}/request`;this.mqttClient.publish(m,o,i=>{if(i)return a(`Error publishing to topic '${m}': ${i.message}`);l()})})}get data(){return this._printerData}get status(){return this._printerStatus}};r(D,"BambuClient");var de=D;export{f as AbstractCommand,V as AmsRFIDStatus,de as BambuClient,le as Fan,Q as FilamentType,d as GCodeCommand,ie as GCodeFileCommand,ne as GCodeLineCommand,b as GetVersionCommand,w as Job,W as PrintStage,p as PrinterModel,c as PushAllCommand,X as SpeedLevel,me as UpdateFanCommand,oe as UpdateLightCommand,pe as UpdateSpeedCommand,se as UpdateStateCommand,ue as UpdateTempCommand,K as UpgradeDisplayState,Y as UpgradeErrorCode,Z as UpgradeStatusFinishState,$ as UpgradeStatusProgressState,gt as getCleanPushInfoCommand,Je as getFilamentConfig,j as isGCodeLineCommand,q as isGcodeFileCommand,x as isGetVersionCommand,z as isInfoMessage,g as isMCPrintMessage,y as isPrintMessage,Oe as isProjectFileCommand,h as isPushAllCommand,ht as isPushInfoCommand,J as isPushStatusCommand,ee as isUpdateFanCommand,te as isUpdateLightCommand,_e as isUpdateSpeedCommand,re as isUpdateStateCommand,ae as isUpdateTempCommand};
++{endif}`],filament_id:"GFL01",filament_flow_ratio:["0.98"],filament_vendor:["Polymaker"]}};var W;(function(e){e[e.PRINTING=0]="PRINTING",e[e.BED_LEVELING=1]="BED_LEVELING",e[e.HEATBED_PREHEATING=2]="HEATBED_PREHEATING",e[e.XY_MECH_MODE_SWEEP=3]="XY_MECH_MODE_SWEEP",e[e.CHANGE_MATERIAL=4]="CHANGE_MATERIAL",e[e.M400_PAUSE=5]="M400_PAUSE",e[e.FILAMENT_RUNOUT_PAUSE=6]="FILAMENT_RUNOUT_PAUSE",e[e.HOTEND_HEATING=7]="HOTEND_HEATING",e[e.EXTRUDE_COMPENSATION_SCAN=8]="EXTRUDE_COMPENSATION_SCAN",e[e.BED_SCAN=9]="BED_SCAN",e[e.FIRST_LAYER_SCAN=10]="FIRST_LAYER_SCAN",e[e.BE_SURFACE_TYPT_IDENTIFICATION=11]="BE_SURFACE_TYPT_IDENTIFICATION",e[e.SCANNER_EXTRINSIC_PARA_CALI=12]="SCANNER_EXTRINSIC_PARA_CALI",e[e.TOOLHEAD_HOMING=13]="TOOLHEAD_HOMING",e[e.NOZZLE_TIP_CLEANING=14]="NOZZLE_TIP_CLEANING",e[e.EXTRUDER_TEMP_PROTECT_CALI=15]="EXTRUDER_TEMP_PROTECT_CALI",e[e.USER_PAUSE=16]="USER_PAUSE",e[e.TOOLHEAD_SHELL_OFF_PAUSE=17]="TOOLHEAD_SHELL_OFF_PAUSE",e[e.SCANNER_LASER_PARA_CALI=18]="SCANNER_LASER_PARA_CALI",e[e.EXTRUDER_ABSOLUTE_FLOW_CALI=19]="EXTRUDER_ABSOLUTE_FLOW_CALI",e[e.HOTEND_TEMPERATURE_ERROR_PAUSE=20]="HOTEND_TEMPERATURE_ERROR_PAUSE",e[e.HEATED_BED_TEMPERATURE_ERROR_PAUSE=21]="HEATED_BED_TEMPERATURE_ERROR_PAUSE",e[e.FILAMENT_UNLOADING=22]="FILAMENT_UNLOADING",e[e.SKIP_STEP_PAUSE=23]="SKIP_STEP_PAUSE",e[e.FILAMENT_LOADING=24]="FILAMENT_LOADING",e[e.MOTOR_NOISE_CALIBRATION=25]="MOTOR_NOISE_CALIBRATION",e[e.AMS_LOST_PAUSE=26]="AMS_LOST_PAUSE",e[e.HEAT_BREAK_FAN_PAUSE=27]="HEAT_BREAK_FAN_PAUSE",e[e.CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE=28]="CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE",e[e.CHAMBER_COOLING=29]="CHAMBER_COOLING",e[e.USER_INSERT_GCODE_PAUSE=30]="USER_INSERT_GCODE_PAUSE",e[e.MOTOR_NOISE_SHOWOFF=31]="MOTOR_NOISE_SHOWOFF",e[e.NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE=32]="NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE",e[e.CUTTER_ERROR_PAUSE=33]="CUTTER_ERROR_PAUSE",e[e.FIRST_LAYER_ERROR_PAUSE=34]="FIRST_LAYER_ERROR_PAUSE",e[e.NOZZLE_CLOG_PAUSE=35]="NOZZLE_CLOG_PAUSE"})(W||(W={}));var X;(function(e){e.SILENT="1",e.NORMAL="2",e.SPORT="3",e.LUDICROUS="4"})(X||(X={}));var V;(function(e){e[e.IDLE=0]="IDLE",e[e.READING=1]="READING",e[e.GCODE_TRANS=2]="GCODE_TRANS",e[e.GCODE_RUNNING=3]="GCODE_RUNNING",e[e.ASSISTANT=4]="ASSISTANT",e[e.SWITCH_FILAMENT=5]="SWITCH_FILAMENT",e[e.HAS_FILAMENT=6]="HAS_FILAMENT"})(V||(V={}));var $;(function(e){e.DOWNLOADING="DOWNLOADING",e.UPGRADE_REQUEST="UPGRADE_REQUEST",e.PRE_FLASH_START="PRE_FLASH_START",e.PRE_FLASH_SUCCESS="PRE_FLASH_SUCCESS"})($||($={}));var Z;(function(e){e.UPGRADE_SUCCESS="UPGRADE_SUCCESS",e.DOWNLOAD_FAIL="DOWNLOAD_FAIL",e.FLASH_FAIL="FLASH_FAIL",e.PRE_FLASH_FAIL="PRE_FLASH_FAIL",e.UPGRADE_FAIL="UPGRADE_FAIL"})(Z||(Z={}));var Y;(function(e){e[e.UpgradeNoError=0]="UpgradeNoError",e[e.UpgradeDownloadFailed=1]="UpgradeDownloadFailed",e[e.UpgradeVerifyFailed=2]="UpgradeVerifyFailed",e[e.UpgradeFlashFailed=3]="UpgradeFlashFailed",e[e.UpgradePrinting=4]="UpgradePrinting"})(Y||(Y={}));var K;(function(e){e[e.UNAVAILABLE=0]="UNAVAILABLE",e[e.IDLE=1]="IDLE",e[e.UPGRADING=2]="UPGRADING",e[e.UPGRADE_FINISHED=3]="UPGRADE_FINISHED"})(K||(K={}));var Q;(function(e){e.PLA="PLA",e.ABS="ABS",e.TPU="TPU",e.PC="PC",e.ASA="ASA",e.PA_CF="PA-CF",e.PA6_CF="PA6-CF",e.PET_CF="PET-CF",e.PETG="PETG",e.PETG_CF="PETG-CF",e.PLA_AERO="PLA-AERO",e.PLA_CF="PLA-CF",e.PPA_CF="PPA-CF",e.PPA_GF="PPA-GF",e.PA="PA",e.HIPS="HIPS",e.PPS="PPS",e.PPS_CF="PPS-CF",e.PVA="PVA",e.PLA_S="PLA-S",e.PA_S="PLA-S"})(Q||(Q={}));function Je(e){return k[e]??null}r(Je,"getFilamentConfig");function h(e){return e.command==="push_status"&&Object.keys(e).length>=40}r(h,"isPushAllCommand");function ee(e){return e.command==="gcode_line"&&!!e?.param?.startsWith("M106")}r(ee,"isUpdateFanCommand");function te(e){return e.command==="push_status"&&e.hasOwnProperty("lights_report")}r(te,"isUpdateLightCommand");function _e(e){return e.command==="push_status"&&(e.hasOwnProperty("spd_lvl")||e.hasOwnProperty("spd_mag"))}r(_e,"isUpdateSpeedCommand");function re(e){return e.command===e.command}r(re,"isUpdateStateCommand");function ae(e){return e.command==="gcode_line"&&!!(e?.param?.startsWith("M104")||e?.param?.startsWith("M140"))}r(ae,"isUpdateTempCommand");function g(e){return!!e?.mc_print&&!!e?.mc_print?.command&&["push_info"].includes(e.mc_print.command)}r(g,"isMCPrintMessage");function ht(e){return e.command==="push_info"}r(ht,"isPushInfoCommand");function gt(e){let[,_,t,l]=e.param.match(/^\[(.+?)](?:\[(.+?)])?\s*(.+)$/)??[];return{sequenceId:Number(e.sequence_id),category:_,subcategory:t,content:l,rawParam:e.param}}r(gt,"getCleanPushInfoCommand");function x(e){return e.command==="get_version"}r(x,"isGetVersionCommand");function z(e){return!!e?.info&&!!e?.info?.command&&["get_version"].includes(e.info.command)}r(z,"isInfoMessage");var E=class E extends f{constructor({fileName:t}){super({param:t});n(this,"category","print");n(this,"command","gcode_file");n(this,"ownsResponse",q)}};r(E,"GCodeFileCommand");var ie=E;var S=class S extends d{constructor({gcodes:t}){super(t);n(this,"command","gcode_line");n(this,"ownsResponse",j)}};r(S,"GCodeLineCommand");var ne=S;var G=class G extends f{constructor(){super();n(this,"category","info");n(this,"command","get_version");n(this,"ownsResponse",x)}};r(G,"GetVersionCommand");var b=G;var M=class M extends f{constructor(){super();n(this,"category","pushing");n(this,"command","pushall");n(this,"ownsResponse",h)}};r(M,"PushAllCommand");var c=M;var le;(function(e){e[e.PART_COOLING_FAN=1]="PART_COOLING_FAN",e[e.AUXILIARY_FAN=2]="AUXILIARY_FAN",e[e.CHAMBER_FAN=3]="CHAMBER_FAN"})(le||(le={}));var L=class L extends d{constructor({fan:t,speed:l}){super([`M106 P${t.toString()} S${255*l/100}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ee)}};r(L,"UpdateFanCommand");var me=L;var F=class F extends f{constructor({light:t,mode:l,loopOptions:a={led_on_time:0,led_off_time:0,loop_times:0,interval_time:0}}){super({led_node:t,led_mode:l,...a});n(this,"category","system");n(this,"command","ledctrl");n(this,"ownsResponse",te)}};r(F,"UpdateLightCommand");var oe=F;var N=class N extends f{constructor({speed:t}){super({param:t.toString()});n(this,"category","print");n(this,"command","print_speed");n(this,"ownsResponse",_e)}};r(N,"UpdateSpeedCommand");var pe=N;var C=class C extends f{constructor({state:t}){super();n(this,"category","print");n(this,"command");n(this,"ownsResponse",re);this.command=t}};r(C,"UpdateStateCommand");var se=C;var fe;(function(e){e.BED="M140",e.EXTRUDER="M104"})(fe||(fe={}));var T=class T extends d{constructor({part:t,temperature:l}){super([`${t} S${l}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ae)}};r(T,"UpdateTempCommand");var ue=T;var p;(function(e){e.X1C="X1C",e.X1="X1",e.X1E="X1E",e.P1P="P1P",e.P1S="P1S",e.P2S="P2S",e.H2S="H2S",e.H2D="H2D",e.H2C="H2C",e.H2DPRO="H2DPRO",e.A1="A1",e.A1M="A1M"})(p||(p={}));import{createId as xe}from"@paralleldrive/cuid2";var ze=new RegExp(/\.[^/.]+$/),R=class R{constructor(_,t,l,a=new Date){n(this,"_jobData");let o=[p.P1P,p.P1S].includes(l);this._jobData={id:xe(),printerId:t,printerModel:l,name:_.subtask_name.replace(ze,""),fileName:_.subtask_name,gcodeName:_.gcode_file,jobOrigin:_.print_type,totalLayerNumber:_.total_layer_num,totalPrintTime:_.mc_remaining_time,status:_.gcode_state,stage:_.stg_cur,percentDone:_.mc_percent,layerNumber:_.layer_num,remainingTime:_.mc_remaining_time,skippedObjects:_.s_obj,statusHistory:[{status:_.gcode_state,changedAt:a}],speedLevelHistory:[{speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:a}],printingStageHistory:[{stage:_.stg_cur,changedAt:a}],temperatureHistory:[{bedTemp:_.bed_temper,bedTargetTemp:_.bed_target_temper,interiorTemp:o?_.frame_temper:_.chamber_temper,nozzleTemp:_.nozzle_temper,nozzleTargetTemp:_.nozzle_target_temper,changedAt:a}],tempLastUpdatedAt:new Date,errorCodes:_.hms.map(m=>({attr:m.attr,code:m.code,thrownAt:a,layerNumber:_.layer_num})),createdAt:a}}update(_){if(!this._jobData)return;let t=this._jobData,l=new Date,a=[p.P1P,p.P1S].includes(this._jobData.printerModel);_.gcode_state&&t.statusHistory.at(-1)?.status!==_.gcode_state&&t.statusHistory.push({status:_.gcode_state,changedAt:l}),_.spd_lvl&&_.spd_mag&&t.speedLevelHistory.at(-1)?.speedLevel!==_.spd_lvl&&t.speedLevelHistory.push({speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:l}),_.stg_cur&&t.printingStageHistory.at(-1)?.stage!==_.stg_cur&&t.printingStageHistory.push({stage:_.stg_cur,changedAt:l});let o=!!(_.bed_temper||_.bed_target_temper||(a?_.frame_temper:_.chamber_temper)||_.nozzle_temper||_.nozzle_target_temper),m=t.tempLastUpdatedAt.getTime()+5e3<l.getTime();if(o&&m){let s=a?_.frame_temper:_.chamber_temper,u=t.temperatureHistory.at(-1);t.temperatureHistory.push({bedTemp:_.bed_temper??u.bedTemp,bedTargetTemp:_.bed_target_temper??u.bedTargetTemp,interiorTemp:s??u.interiorTemp,nozzleTemp:_.nozzle_temper??u.nozzleTemp,nozzleTargetTemp:_.nozzle_target_temper??u.nozzleTargetTemp,changedAt:l}),t.tempLastUpdatedAt=l}let i={status:_.gcode_state??t.status,stage:_.stg_cur??t.stage,percentDone:_.mc_percent??t.percentDone,layerNumber:_.layer_num??t.layerNumber,remainingTime:_.mc_remaining_time??t.remainingTime,skippedObjects:_.s_obj??t.skippedObjects,errorCodes:_.hms?.map((s,u)=>({attr:s.attr??t.errorCodes[u].attr,code:s.code??t.errorCodes[u].code,thrownAt:l??t.errorCodes[u].thrownAt,layerNumber:_.layer_num??t.errorCodes[u].layerNumber}))??t.errorCodes};this._jobData={...this._jobData,...i}}get data(){return this._jobData}};r(R,"Job");var w=R;import*as ce from"mqtt";import*as ye from"eventemitter3";import{createId as be}from"@paralleldrive/cuid2";function I(e){return new Promise(_=>setTimeout(_,e))}r(I,"sleep");function O(e,_){let t={},l=r((a,o,m)=>{for(let i in o){let s=o[i],u=a[i];if(!(i in a&&JSON.stringify(a[i])===JSON.stringify(o[i]))){if(typeof s=="object"&&s!==null&&u!==null&&!Array.isArray(s)){m[i]=m[i]||{},l(a[i],o[i],m[i]);continue}m[i]=o[i]}}},"checkDifferences");return l(e,_,t),t}r(O,"subtractObject");var D=class D extends ye.EventEmitter{constructor(t){super();n(this,"clientOptions");n(this,"id");n(this,"mqttClient");n(this,"config");n(this,"_printerData");n(this,"_printerStatus");n(this,"jobHistory");n(this,"currentJob");this.clientOptions=t,this.id=be(),this.mqttClient=void 0,this._printerData={modules:[],model:void 0},this._printerStatus="OFFLINE",this.jobHistory=[],this.currentJob=null,this.config={host:t.host,port:t.port??8883,accessToken:t.accessToken,serialNumber:t.serialNumber,throwOnOfflineCommands:t.throwOnOfflineCommands??!1,reconnectInterval:t.reconnectInterval??1e3,connectTimeout:t.connectTimeout??2e3,keepAlive:t.keepAlive??20},this.jobHistory=t.jobHistory??[],this.currentJob=t.currentJob??null}emit(t,...l){return super.emit(t,...l)}off(t,l){return super.off(t,l),this}once(t,l){return super.once(t,l),this}on(t,l){return super.on(t,l),this}async connectMQTT(){return new Promise((t,l)=>{if(this.mqttClient)throw new Error("Can't establish a new connection while running another one!");this.mqttClient=ce.connect(`mqtts://${this.config.host}:${this.config.port}`,{username:"bblp",password:this.config.accessToken,reconnectPeriod:this.clientOptions.reconnectInterval,connectTimeout:this.clientOptions.connectTimeout,keepalive:this.clientOptions.keepAlive,resubscribe:!0,rejectUnauthorized:!1}),this.mqttClient.on("connect",async(...a)=>{await this.onConnect(...a),this.emit("client:connect"),t()}),this.mqttClient.on("disconnect",()=>{this.emit("client:disconnect",!1),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("offline",()=>{this.emit("client:disconnect",!0),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("message",(a,o)=>this.emit("rawMessage",a,o)),this.mqttClient.on("error",a=>{this.emit("client:error",a),l(a)})})}async connect(){return await Promise.all([this.connectMQTT()])}async disconnect(t=!1,l){return new Promise(a=>this.mqttClient?.end(t,l,a))}subscribe(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error(`Unable to subscribe to topic "${t}" while disconnected from printer!`);return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");this.mqttClient.subscribe(t,m=>{if(m)return a(`Error subscribing to topic '${t}': ${m.message}`)});let o=r(async(m,i)=>{m===t&&await this.onMessage(i.toString(),t)},"listener");this.mqttClient.on("message",o),l()})}async executeCommand(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error("Unable to send commands while disconnected from printer!");return new Promise((l,a)=>{t.invoke(this).catch(m=>a(m));let o=setTimeout(()=>{a(new Error("Command execution timed out after 5 seconds."))},5e3);this.on("rawMessage",(m,i)=>{let s=JSON.parse(i.toString()),u=Object.keys(s)[0];if(!(z(s)||g(s)||y(s)))return;let P=s[u];P?.command&&t.ownsResponse(P)&&(clearTimeout(o),l(P))})})}async onConnect(t){await this.subscribe(`device/${this.config.serialNumber}/report`),await I(1e3),await this.executeCommand(new b),(this._printerData.model===p.P1P||this._printerData.model===p.P1S||this._printerData.model===p.P2S||this._printerData.model===p.A1||this._printerData.model===p.A1M)&&(await this.executeCommand(new c),setInterval(async()=>{await this.executeCommand(new c)},5*60*1e3))}async onMessage(t,l){let a=JSON.parse(t),o=Object.keys(a)[0];if(z(a)||g(a)||y(a)){if(y(a)&&(this.emit("message",l,o,a.print),(h(a.print)||J(a.print))&&(this._printerData={...this._printerData,...a.print},this.emit("printer:dataUpdate",this._printerData,a.print),a.print.gcode_state&&a.print.gcode_state!==this._printerStatus))){let m=this._printerStatus,i=a.print.gcode_state;if(this.emit("printer:statusUpdate",m,i),(i==="PREPARE"||i==="SLICING")&&(i="IDLE"),(m==="PREPARE"||m==="SLICING")&&(m="RUNNING"),(m==="IDLE"||m==="FINISH"||m==="FAILED")&&i==="RUNNING")this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=new w(this._printerData,this.id,this._printerData.model),this.emit("job:start",this.currentJob);else if(m==="RUNNING"&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))i==="FINISH"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"SUCCESS"):i==="FAILED"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"FAILED"):i==="IDLE"&&this.currentJob!==null&&this.emit("job:finish",this.currentJob,"UNEXPECTED"),this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=null;else if(m==="RUNNING"&&i==="PAUSE")this.currentJob&&this.emit("job:pause",this.currentJob,!1);else if(m==="PAUSE"&&i==="RUNNING")this.currentJob&&this.emit("job:unpause",this.currentJob);else if(m==="OFFLINE"&&i==="PAUSE")this.emit("job:offlineRecovery",this.currentJob);else if(!(m==="OFFLINE"&&i==="RUNNING")){if(!((m==="IDLE"||m==="OFFLINE")&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))){if(!((m==="FINISH"||i==="FAILED")&&i==="IDLE")){if(m!==i)void 0}}}if(this._printerStatus=a.print.gcode_state,this.currentJob){let s=this.currentJob?.data;this.currentJob.update(a.print),this.emit("job:update",this.currentJob,O(s,this.currentJob.data))}}if(g(a)&&this.emit("message",l,o,a.print),z(a)&&(this.emit("message",l,o,a.info),x(a.info))){let m=[...new Set([...this._printerData.modules,...a.info.module])];this._printerData.modules=m,this.emit("printer:dataUpdate",this._printerData,{modules:m});let i=this._printerData.modules.find(s=>s.name==="ota");if(!i)return;if(i.sn.startsWith("00M"))this._printerData.model=p.X1C;else if(i.sn.startsWith("00W"))this._printerData.model=p.X1;else if(i.sn.startsWith("03W"))this._printerData.model=p.X1E;else if(i.sn.startsWith("01S"))this._printerData.model=p.P1P;else if(i.sn.startsWith("01P"))this._printerData.model=p.P1S;else if(i.sn.startsWith("22E"))this._printerData.model=p.P2S;else if(i.sn.startsWith("039"))this._printerData.model=p.A1;else if(i.sn.startsWith("030"))this._printerData.model=p.A1M;else if(i.sn.startsWith("093"))this._printerData.model=p.H2S;else if(i.sn.startsWith("094"))this._printerData.model=p.H2D;else if(i.sn.startsWith("31B"))this._printerData.model=p.H2C;else if(i.sn.startsWith("239"))this._printerData.model=p.H2DPRO;this.emit("printer:dataUpdate",this._printerData,{model:this._printerData.model})}}}publish(t){return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");let o=typeof t=="string"?t:JSON.stringify(t),m=`device/${this.config.serialNumber}/request`;this.mqttClient.publish(m,o,i=>{if(i)return a(`Error publishing to topic '${m}': ${i.message}`);l()})})}get data(){return this._printerData}get status(){return this._printerStatus}};r(D,"BambuClient");var de=D;export{f as AbstractCommand,V as AmsRFIDStatus,de as BambuClient,le as Fan,Q as FilamentType,d as GCodeCommand,ie as GCodeFileCommand,ne as GCodeLineCommand,b as GetVersionCommand,w as Job,W as PrintStage,p as PrinterModel,c as PushAllCommand,X as SpeedLevel,me as UpdateFanCommand,oe as UpdateLightCommand,pe as UpdateSpeedCommand,se as UpdateStateCommand,ue as UpdateTempCommand,K as UpgradeDisplayState,Y as UpgradeErrorCode,Z as UpgradeStatusFinishState,$ as UpgradeStatusProgressState,gt as getCleanPushInfoCommand,Je as getFilamentConfig,j as isGCodeLineCommand,q as isGcodeFileCommand,x as isGetVersionCommand,z as isInfoMessage,g as isMCPrintMessage,y as isPrintMessage,Oe as isProjectFileCommand,h as isPushAllCommand,ht as isPushInfoCommand,J as isPushStatusCommand,ee as isUpdateFanCommand,te as isUpdateLightCommand,_e as isUpdateSpeedCommand,re as isUpdateStateCommand,ae as isUpdateTempCommand};

package/src/bambu-native.ts

@@ -37,6 +37,8 @@ export type BambuNativeControlOptions = {
 
 type NativeHelperResult = {
   resultCode: number;
+  signal: NodeJS.Signals | null;
+  authorizedAttempts: number;
   updates: string[];
   stderr: string;
 };
@@ -244,7 +246,7 @@ function runNativeHelper(
       settled = true;
       cleanup();
       if (failure) { reject(failure); return; }
-      if (needsAuthorization && code === 0 && (authorizing || authorizedAttempts === 0)) {
+      if (needsAuthorization && (code === 0 || updates.includes("native_print result=0") || stdout.trim() === "native_print result=0") && (authorizing || authorizedAttempts === 0)) {
         reject(new Error("Native helper exited without completed dispatch authorization."));
         return;
       }
@@ -253,7 +255,7 @@ function runNativeHelper(
         updates.push(trailing);
         onUpdate?.(trailing);
       }
-      resolve({ resultCode: code ?? (signal ? 1 : 0), updates, stderr });
+      resolve({ resultCode: code ?? (signal ? 1 : 0), signal, authorizedAttempts, updates, stderr });
     });
   });
 }
@@ -653,6 +655,10 @@ export async function printWithBambuNative(
     execution
   );
   if (result.resultCode !== 0) {
+    const explicitRejection = result.updates.some(line => /^native_print result=-?[1-9]\d*$/.test(line));
+    if (result.authorizedAttempts > 0 && (result.updates.includes("native_print result=0") || (result.signal && !explicitRejection))) {
+      throw new Error("Bambu native print dispatch is uncertain: the printer may have accepted this job before the helper exited. Check printer status and the job name before retrying; do not automatically resend it.");
+    }
     const detail = [
       ...result.updates,
       ...(result.stderr ? [result.stderr.trim()] : []),

package/src/printers/bambu.ts

@@ -183,8 +183,8 @@ class TolerantBambuClient extends BambuClient {
     const sn = this.config.serialNumber;
     if (sn.startsWith("093")) return "H2S";
     if (sn.startsWith("094")) return "H2D";
-    if (sn.startsWith("239")) return "H2C";
-    if (sn.startsWith("31B")) return "H2DPRO";
+    if (sn.startsWith("31B")) return "H2C";
+    if (sn.startsWith("239")) return "H2DPRO";
     if (sn.startsWith("20P")) return "X2D";
     if (sn.startsWith("00M")) return "X1C";
     if (sn.startsWith("00W")) return "X1";

package/src/safety/print-file.ts

@@ -70,7 +70,7 @@ function parameters(text: string, flags = ''): Map<string,number> {
   return result;
 }
 // Layer comments only close a startup exception; they can never enable one.
-const isLayerMarker=(line:string):boolean=>/^\s*;\s*(?:LAYER_CHANGE|CHANGE_LAYER|LAYER\s*:|layer num\/total_layer_count\s*:)/i.test(line);
+const isLayerMarker=(line:string):boolean=>/^\s*;\s*(?:(?:LAYER_CHANGE|CHANGE_LAYER)(?:\s|$)|LAYER\s*:|layer num\/total_layer_count\s*:)/i.test(line);
 function boundedX1ePurge(lines:string[],index:number):boolean {
   // Official X1E common flush: 50 mm at 200 mm/min, followed immediately by
   // lowering the target. No dwell, XY extrusion, repeated block or open-ended
@@ -249,6 +249,10 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
   let nozzleTarget=0;let selectsAms=false;let pending: number|undefined;let previous: number|undefined;
   let maxNozzleTemperature=0,maxBedTemperature=0,maxChamberTemperature=0,commandCount=0;
   let depositionStarted=false,commonFlushUsed=false;
+  // Bound the H2C vendor forms to its one explicit executable startup block.
+  const startupStarts=lines.flatMap((line,index)=>/^\s*;\s*EXECUTABLE_BLOCK_START\s*$/i.test(line)?[index]:[]);
+  const startupEnds=lines.flatMap((line,index)=>/^\s*;\s*MACHINE_START_GCODE_END\s*$/i.test(line)?[index]:[]);
+  const h2cStartup=(index:number)=>model==='h2c' && !depositionStarted && startupStarts.length===1 && startupEnds.length===1 && index>startupStarts[0] && index<startupEnds[0];
   const heat=(component:'nozzle'|'bed'|'chamber',value:number,position?:number,allMaterials=false,startupPurge=false)=>{
     const affected=allMaterials || position===undefined ? materials.map((_,index)=>index) : [requirePosition(position)];
     if(component==='nozzle' && startupPurge) validateStartupPurgeTemperature(value,model,affected.map(index=>materials[index]));
@@ -267,8 +271,10 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
   };
   for(let index=0;index<lines.length;index++) {
     try {
-      if(isLayerMarker(lines[index])) closeStartupWindow();
+      if(isLayerMarker(lines[index]) || /^\s*;\s*MACHINE_START_GCODE_END\s*$/i.test(lines[index])) closeStartupWindow();
       let line=stripComments(lines[index]);if(!line||line==='%') continue;
+      // The official H2C template emits this literal separator without a semicolon.
+      if(line==='========== record data ==========' && h2cStartup(index)) continue;
       line=line.replace(/^N\d+\s*/i,'').replace(/\*\d+\s*$/,'');
       if(/[{}\[\]#]/.test(line)) fail('unresolved dynamic command syntax');
       if(/^SYNC(?=$|\s)/i.test(line)) {
@@ -299,6 +305,27 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
         // Official A1 and A1 mini start G-code waits with M109 S<target> H<limit>
         // (S25 H140, S100 H170, S220 H300). H is not a heater target: S stays the
         // checked target, so H is accepted only within those vendor bounds.
+        if(args.has('O')) {
+          // H2C's exact all-hotend preheat offset is relative to the declared
+          // first-layer targets. Check every base and derived target, never use
+          // editable maxima or an unchecked offset as thermal evidence.
+          if(code!=='M104' || !h2cStartup(index) || args.size!==2 || args.get('O')!==-80 || !Number.isNaN(args.get('A')!)) fail('unsupported H2C startup offset parameters');
+          const targets=consistent(metadataValues(metadata,['nozzle_temperature_initial_layer']),value=>{
+            const values=list(value);return values.length===materials.length && values.every(v=>NUMBER.test(v) && Number.isFinite(Number(v)))?values.map(Number):undefined;
+          },'first-layer nozzle temperature');
+          for(let position=0;position<targets.length;position++) {
+            validateTemperature('nozzle',targets[position],model,[materials[position]]);
+            const preheat=Math.max(0,targets[position]-80);
+            validateTemperature('nozzle',preheat,model,[materials[position]]);
+            nozzleTarget=Math.max(nozzleTarget,preheat);
+            maxNozzleTemperature=Math.max(maxNozzleTemperature,preheat);
+          }
+          continue;
+        }
+        if(args.has('D')) {
+          if(!['M140','M190'].includes(code) || !h2cStartup(index) || args.size!==1) fail('unsupported H2C startup bed parameters');
+          heat('bed',args.get('D')!,undefined,true);continue;
+        }
         const vendorWait=code==='M109' && ['a1','a1mini'].includes(model);
         for(const key of args.keys()) if(!'SRTA'.includes(key) && !(key==='H' && vendorWait)) fail(`unsupported ${code} temperature parameter ${key}`);
         if(args.has('H') && (!Number.isFinite(args.get('H')) || args.get('H')!<0 || args.get('H')!>300)) fail(`unsupported ${code} wait parameter H`);
@@ -312,7 +339,8 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
         if(commonFlush) commonFlushUsed=true;
         for(const key of ['S','R']) if(args.has(key)) heat(component,args.get(key)!,position,args.has('T') || args.has('A'),commonFlush);
       } else if(code==='M620' || code==='M621') {
-        const args=parameters(argumentsText,model==='x2d'?'MAB':'MA');
+        const args=parameters(argumentsText,model==='x2d'?'MAB':model==='h2c'?'MAN':'MA');
+        if(args.has('N') && (code!=='M620' || !h2cStartup(index) || args.size!==1 || !Number.isNaN(args.get('N')!))) fail('unsupported H2C startup hotend-remap flag');
         // X2D templates use B as a bare material-switch flag, never a target.
         if(args.has('B') && (model!=='x2d' || !Number.isNaN(args.get('B')!))) fail('unsupported material-switch B flag');
         if(args.has('S')) {
@@ -338,10 +366,22 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
         if(args.has('T')) heat('nozzle',args.get('T')!,active);
       } else if(/^G150\./.test(code) && /T/i.test(argumentsText)) {
         fail(`unsupported thermal-affecting wipe command ${code}`);
+      } else if(code==='M620.14') {
+        const args=parameters(argumentsText);
+        // H2C tower coordinates include the rear wipe area outside object bounds.
+        if(!h2cStartup(index) || args.size!==2 || !['X','Y'].every(key=>args.has(key) && Number.isFinite(args.get(key)) && args.get(key)!>=0 && args.get(key)!<=350)) fail('unsupported H2C startup tower parameters');
+      } else if(model==='h2c' && ['G383','G383.3','G383.7'].includes(code) && /U/i.test(argumentsText)) {
+        const args=parameters(argumentsText);
+        const expected=code==='G383.7'?'UJ':code==='G383.3'?'UL':'OUL';
+        if(!h2cStartup(index) || args.size!==expected.length || [...args.keys()].some(key=>!expected.includes(key)) || args.get('U')!==140 ||
+           (code==='G383.7' && args.get('J')!==0) || (code==='G383' && args.get('O')!==2)) fail('unsupported H2C startup probing parameters');
+        const position=args.has('L')?requirePosition(args.get('L')!):active;
+        heat('nozzle',args.get('U')!,position);
       } else if(code==='G383' || code==='G383.3') {
         // Bambu probing routines carry nozzle temperature in T and optionally
         // the project filament position in L (including the H2D G383.3 form).
         const args=parameters(argumentsText);
+        if(args.has('U')) fail('unsupported G383 temperature parameter U outside H2C startup');
         if(code==='G383.3' && (!args.has('T') || [...args.keys()].some(key=>!'TL'.includes(key)))) fail('unsupported G383.3 temperature parameters');
         const position=args.has('L')?requirePosition(args.get('L')!):active;
         if(args.has('T')) heat('nozzle',args.get('T')!,position);

package/src/safety/printer-state.ts

@@ -7,7 +7,7 @@ const MODEL_IDS: Record<string, string> = {
   N2S: "A1", A1M: "A1 Mini", C11: "P1P", C12: "P1S", C13: "X1E", "BL-P001": "X1C", "BL-P002": "X1",
 };
 const SERIAL_MODELS: Record<string, string> = {
-  "093": "H2S", "094": "H2D", "239": "H2C", "31B": "H2D Pro", "20P": "X2D",
+  "093": "H2S", "094": "H2D", "31B": "H2C", "239": "H2D Pro", "20P": "X2D",
   "00M": "X1C", "00W": "X1", "03W": "X1E", "01S": "P1P", "01P": "P1S", "22E": "P2S", "039": "A1", "030": "A1 Mini",
 };