bambu-printer-mcp 1.1.23 → 1.1.25

package/CONTRIBUTORS.md

@@ -6,6 +6,9 @@ Thank you to everyone who builds, tests, reports problems, and shares real print
 
 | Contributor | Contribution |
 | --- | --- |
+| [Aleksei Popovich (alexpapay)](https://github.com/alexpapay) | Fixes cross-platform AMS profile resolution and packed P2S chamber status in [#43](https://github.com/DMontgomery40/bambu-printer-mcp/pull/43), contributes regressions, and supplies read-only Windows P2S/AMS 2 Pro status and local slicing evidence. No physical print is claimed for this contribution. |
+| [travismcashan](https://github.com/travismcashan) | Reports stock X2D material-switch and runout-purge rejection, misleading unchecked confirmation, and stdout diagnostics in [#44](https://github.com/DMontgomery40/bambu-printer-mcp/issues/44). Supplies exact preset syntax and firmware evidence, then reports a clean physical X2D cube print with a local workaround; maintainer validation remains isolated and mocked. |
+| [nitpreet22](https://github.com/nitpreet22) | Fixes rejection of the stock A1/A1 mini `M109 H` startup waits in [#41](https://github.com/DMontgomery40/bambu-printer-mcp/pull/41), contributes temperature and model regressions, and supplies Windows Bambu Studio profile and real sliced A1 job inspection evidence. Their physical print used Bambu Studio, not this MCP change. |
 | [Steavie (steavie)](https://github.com/steavie) | Reports the reversed A1/A1 mini serial prefixes in [#39](https://github.com/DMontgomery40/bambu-printer-mcp/issues/39), with A1 status and configuration evidence that identifies the status and fresh-identity regression. |
 | [JaviOFC](https://github.com/JaviOFC) | Reports the X2D identity rejection in [#36](https://github.com/DMontgomery40/bambu-printer-mcp/issues/36) and supplies current firmware, connection-mode, status-field, serial-prefix, and cloud-job evidence showing that `model_id` can contain a print-job identifier while `model` correctly identifies the printer. |
 | [Izzy Mansurov (sapoepsilon)](https://github.com/sapoepsilon) | Fixes Bambu Studio 02.08 P2S extruder-variant metadata and airduct-command inspection in [#33](https://github.com/DMontgomery40/bambu-printer-mcp/pull/33). Supplies regression tests and offline inspection evidence from four real P2S 0.6 mm PLA/PETG jobs and unsafe mutated copies; this contribution does not claim a physical print. |

package/README.md

@@ -191,7 +191,7 @@ The optional FULU **BambuNetwork bridge** exposes `bambu_network_bridge_status`,
 ## Features
 
 - Get detailed printer status: temperatures (nozzle, bed, chamber), print progress, current layer, time remaining, and live AMS slot data
-- Query live AMS inventory with resolved Bambu/Orca filament profile paths via `get_printer_filaments`. Includes per-tray display names, match confidence (`high`/`medium`/`low`/`none`), resolution tier (`exact-model-nozzle`/`model`/`generic`/`unresolved`), and a summary with recommended auto-slice filament. Retries automatically when AMS data hasn't arrived yet (common on first MQTT push from idle printers).
+- Query live AMS inventory with resolved Bambu/Orca filament profile paths via `get_printer_filaments`. Profile suggestions use the selected slicer installation on Windows, macOS and Linux, including an explicit `BAMBU_PROFILES_ROOT`; unavailable profiles leave live inventory readable. Includes per-tray display names, match confidence (`high`/`medium`/`low`/`none`), resolution tier (`exact-model-nozzle`/`model`/`generic`/`unresolved`), and a summary with recommended auto-slice filament. Retries automatically when AMS data hasn't arrived yet (common on first MQTT push from idle printers).
 - List, upload, and delete files on the printer's SD card via FTPS
 - Capture a JPEG snapshot from the chamber camera. Supports A1, A1 mini, P1S, P1P (TCP-on-6000), and X1, X1C, X1E, P2S, H2, H2S, H2D, H2C, H2D Pro, X2D (RTSP via ffmpeg). Requires ffmpeg in PATH for the RTSP path.
 - Upload and print pre-sliced `.3mf` projects with checked plate selection and calibration flags. Legacy `.gcode.3mf` routes require a single external-spool-only plate; see the [slicing guide](https://github.com/DMontgomery40/bambu-printer-mcp/blob/main/docs/SLICING.md).
@@ -568,6 +568,8 @@ Retrieve current printer state including temperatures, print progress, layer cou
 }
 ```
 
+Chamber status decodes the current temperature from newer firmware's packed CTC reports, including P2S, while retaining legacy chamber/frame fields.
+
 Returns a structured object with fields including `status` (gcode_state string), `temperatures.nozzle`, `temperatures.bed`, `temperatures.chamber`, `print.progress`, `print.currentLayer`, `print.totalLayers`, `print.timeRemaining`, and `ams` (raw AMS data from the printer).
 
 #### get_printer_filaments

package/dist/3mf_parser.js

@@ -90,7 +90,7 @@ async function parseBambuConfig(zip) {
         if (file) {
             configFile = file;
             configContent = await file.async('string');
-            console.log(`Found Bambu config file: ${configFile.name}`);
+            console.error(`Found Bambu config file: ${configFile.name}`);
             break; // Use the first one found (project usually has the most)
         }
     }
@@ -99,7 +99,7 @@ async function parseBambuConfig(zip) {
             // Attempt to parse as JSON
             const jsonData = JSON.parse(configContent);
             const parsedConfig = parseBambuJSONConfig(jsonData);
-            console.log('Bambu config parsed successfully as JSON.');
+            console.error('Bambu config parsed successfully as JSON.');
             return parsedConfig;
         }
         catch (jsonError) {
@@ -107,7 +107,7 @@ async function parseBambuConfig(zip) {
             // Fallback: Try parsing as INI if JSON fails (though unlikely based on sample)
             try {
                 const parsedConfig = parseFallbackINIConfig(configContent); // Keep a simple INI parser as fallback
-                console.log('Bambu config parsed successfully as INI (fallback).');
+                console.error('Bambu config parsed successfully as INI (fallback).');
                 return parsedConfig;
             }
             catch (iniError) {
@@ -117,7 +117,7 @@ async function parseBambuConfig(zip) {
         }
     }
     else {
-        console.log('No Bambu-specific config file found in Metadata directory.');
+        console.error('No Bambu-specific config file found in Metadata directory.');
         return {};
     }
 }
@@ -186,7 +186,7 @@ async function parse3DModelConfig(zip) {
                 });
             });
         }
-        console.log('3dmodel.model parsed successfully.');
+        console.error('3dmodel.model parsed successfully.');
         return { metadata, objects, build: { items: buildItems } };
     }
     catch (error) {
@@ -195,13 +195,13 @@ async function parse3DModelConfig(zip) {
     }
 }
 export async function parse3MF(filePath) {
-    console.log(`Parsing 3MF file: ${filePath}`);
+    console.error(`Parsing 3MF file: ${filePath}`);
     try {
         const data = await fs.readFile(filePath);
         const zip = await JSZip.loadAsync(data);
         // List files for debugging
         // const fileList = Object.keys(zip.files);
-        // console.log('Files in 3MF:', fileList);
+        // console.error('Files in 3MF:', fileList);
         const { metadata, objects, build } = await parse3DModelConfig(zip);
         const bambuConfig = await parseBambuConfig(zip);
         // Combine data into the final structure
@@ -211,7 +211,7 @@ export async function parse3MF(filePath) {
             build,
             slicerConfig: bambuConfig
         };
-        console.log('3MF parsing completed.');
+        console.error('3MF parsing completed.');
         return combinedData;
     }
     catch (error) {

package/dist/index.js

@@ -20,6 +20,7 @@ import { BambuImplementation, assertDirectPrintSupported } from "./printers/bamb
 import { inspectPrintFile } from "./safety/print-file.js";
 import { validatePrinterState } from "./safety/printer-state.js";
 import { withPrinterOperation, withPrintSnapshot, uniquePrintName } from "./safety/artifact.js";
+import { detectProfilesRoot } from "./slicer/profile-flatten.js";
 dotenv.config();
 const DEFAULT_HOST = process.env.BAMBU_PRINTER_HOST || process.env.PRINTER_HOST || "localhost";
 const DEFAULT_BAMBU_SERIAL = process.env.BAMBU_PRINTER_SERIAL || process.env.BAMBU_SERIAL || "";
@@ -104,7 +105,6 @@ const BAMBU_MODEL_PRESETS = {
     h2c: (n) => `Bambu Lab H2C ${n} nozzle`,
     x2d: (n) => `Bambu Lab X2D ${n} nozzle`,
 };
-const FILAMENT_PROFILE_DIR = "/Applications/BambuStudio.app/Contents/Resources/profiles/BBL/filament";
 const FILAMENT_MODEL_CODES = {
     p1s: "P1S",
     p1p: "P1P",
@@ -123,13 +123,27 @@ let filamentProfileIndexCache = null;
 function buildFilamentProfileIndex() {
     const byName = new Map();
     const baseNameByFilamentId = new Map();
-    if (!fs.existsSync(FILAMENT_PROFILE_DIR)) {
+    let filamentProfileDir;
+    try {
+        const { slicerType, slicerPath } = resolveSlicerConfig(undefined);
+        filamentProfileDir = path.join(detectProfilesRoot(slicerPath, slicerType), "BBL", "filament");
+    }
+    catch {
+        // Profile suggestions are optional; invalid slicer configuration must not hide AMS inventory.
         return { byName, baseNameByFilamentId };
     }
-    for (const entry of fs.readdirSync(FILAMENT_PROFILE_DIR)) {
+    let profileEntries;
+    try {
+        profileEntries = fs.readdirSync(filamentProfileDir);
+    }
+    catch {
+        // Ignore unavailable profile suggestions while keeping live inventory readable.
+        return { byName, baseNameByFilamentId };
+    }
+    for (const entry of profileEntries) {
         if (!entry.endsWith(".json"))
             continue;
-        const filePath = path.join(FILAMENT_PROFILE_DIR, entry);
+        const filePath = path.join(filamentProfileDir, entry);
         try {
             const raw = fs.readFileSync(filePath, "utf8");
             const parsed = JSON.parse(raw);
@@ -880,6 +894,9 @@ class BambuPrinterMCPServer {
                         required: ["confirmed"],
                     },
                 }, { timeout: this.confirmationTimeoutMs });
+                if (response.action === "accept" && response.content?.confirmed !== true) {
+                    throw new Error("Hardware confirmation checkbox was not checked. Check it only after inspecting the printer, or cancel. No command was sent.");
+                }
                 return response.action === "accept" && response.content?.confirmed === true;
             }
             catch (error) {
@@ -1015,7 +1032,7 @@ class BambuPrinterMCPServer {
         if (bedType === "supertack_plate") {
             throw new Error('BambuStudio CLI SuperTack bed type is not verified; use a pre-sliced 3MF for SuperTack or choose textured_plate, cool_plate, engineering_plate, or hot_plate.');
         }
-        console.log(`3MF has no gcode - auto-slicing with ${slicerType} for ${printModel}`);
+        console.error(`3MF has no gcode - auto-slicing with ${slicerType} for ${printModel}`);
         const autoSliceOptions = {
             uptodate: true,
             ensureOnBed: true,
@@ -1025,7 +1042,7 @@ class BambuPrinterMCPServer {
             nozzleType: resolveNozzleType(args?.nozzle_type),
         };
         threeMFPath = await this.stlManipulator.sliceSTL(threeMFPath, slicerType, slicerPath, slicerProfile || undefined, undefined, printPreset, autoSliceOptions);
-        console.log("Auto-sliced to: " + threeMFPath);
+        console.error("Auto-sliced to: " + threeMFPath);
         return { threeMFPath, autoSliced: true };
     }
     async resolveAmsPrintSettings(threeMFPath, args, host, bambuSerial, bambuToken, printModel, printNozzle) {
@@ -3269,7 +3286,7 @@ class BambuPrinterMCPServer {
                             if (printBedType === "supertack_plate") {
                                 throw new Error('BambuStudio CLI SuperTack bed type is not verified; use a pre-sliced 3MF for SuperTack or choose textured_plate, cool_plate, engineering_plate, or hot_plate.');
                             }
-                            console.log(`3MF has no gcode — auto-slicing with ${slicerType} for ${printModel}`);
+                            console.error(`3MF has no gcode — auto-slicing with ${slicerType} for ${printModel}`);
                             const autoSliceOptions = {
                                 uptodate: true,
                                 ensureOnBed: true,
@@ -3291,7 +3308,7 @@ class BambuPrinterMCPServer {
                             }
                             threeMFPath = await this.stlManipulator.sliceSTL(threeMFPath, slicerType, slicerPath, activeSlicerProfile, undefined, // progressCallback
                             printPreset, autoSliceOptions);
-                            console.log("Auto-sliced to: " + threeMFPath);
+                            console.error("Auto-sliced to: " + threeMFPath);
                         }
                         const parsed3MFData = await parse3MF(threeMFPath);
                         const isH2Print = H2_BAMBU_MODELS.has(printModel);

package/dist/printers/bambu.js

@@ -504,6 +504,11 @@ export class BambuImplementation {
             const data = cachedData && Object.keys(cachedData).length > 0
                 ? cachedData
                 : printer.data;
+            const ctcTemperature = data.device?.ctc?.info?.temp;
+            // CTC packs the current temperature in the low 16 bits and the target in the high 16 bits.
+            const chamberTemperature = typeof ctcTemperature === "number" && Number.isInteger(ctcTemperature) && ctcTemperature >= 0 && ctcTemperature <= 0xffffffff
+                ? ctcTemperature & 0xffff
+                : data.chamber_temper || data.frame_temper || 0;
             return {
                 status: data.gcode_state || "UNKNOWN",
                 connected: true,
@@ -516,7 +521,7 @@ export class BambuImplementation {
                         actual: data.bed_temper || 0,
                         target: data.bed_target_temper || 0,
                     },
-                    chamber: data.chamber_temper || data.frame_temper || 0,
+                    chamber: chamberTemperature,
                 },
                 print: {
                     filename: data.subtask_name || data.gcode_file || "None",

package/dist/safety/print-file.js

@@ -405,9 +405,15 @@ export async function inspectPrintFile(filePath, options) {
             }
             if (['M104', 'M109', 'M140', 'M190', 'M141', 'M191'].includes(code)) {
                 const args = parameters(argumentsText, 'A');
+                // Official A1 and A1 mini start G-code waits with M109 S<target> H<limit>
+                // (S25 H140, S100 H170, S220 H300). H is not a heater target: S stays the
+                // checked target, so H is accepted only within those vendor bounds.
+                const vendorWait = code === 'M109' && ['a1', 'a1mini'].includes(model);
                 for (const key of args.keys())
-                    if (!'SRTA'.includes(key))
+                    if (!'SRTA'.includes(key) && !(key === 'H' && vendorWait))
                         fail(`unsupported ${code} temperature parameter ${key}`);
+                if (args.has('H') && (!Number.isFinite(args.get('H')) || args.get('H') < 0 || args.get('H') > 300))
+                    fail(`unsupported ${code} wait parameter H`);
                 if (!args.has('S') && !args.has('R'))
                     fail(`missing ${code} temperature target`);
                 const component = ['M104', 'M109'].includes(code) ? 'nozzle' : ['M140', 'M190'].includes(code) ? 'bed' : 'chamber';
@@ -424,7 +430,10 @@ export async function inspectPrintFile(filePath, options) {
                         heat(component, args.get(key), position, args.has('T') || args.has('A'), commonFlush);
             }
             else if (code === 'M620' || code === 'M621') {
-                const args = parameters(argumentsText, 'MA');
+                const args = parameters(argumentsText, model === 'x2d' ? 'MAB' : 'MA');
+                // X2D templates use B as a bare material-switch flag, never a target.
+                if (args.has('B') && (model !== 'x2d' || !Number.isNaN(args.get('B'))))
+                    fail('unsupported material-switch B flag');
                 if (args.has('S')) {
                     const position = args.get('S');
                     if ([254, 255, 65279, 65535].includes(position)) {
@@ -448,6 +457,14 @@ export async function inspectPrintFile(filePath, options) {
                     }
                 }
             }
+            else if (code === 'M620.22') {
+                // Official X2D runout auto-purge enables the declared project filament.
+                // It supplies no heater target; all explicit heat still uses the shared gate.
+                const args = parameters(argumentsText);
+                if (model !== 'x2d' || args.size !== 2 || !args.has('I') || args.get('P') !== 1)
+                    fail('unsupported M620.22 runout purge parameters');
+                requirePosition(args.get('I'));
+            }
             else if (code === 'M620.1' || code === 'M620.10') {
                 const args = parameters(argumentsText, 'E');
                 const position = code === 'M620.10' && args.get('A') === 1 ? pending ?? active : code === 'M620.10' && args.get('A') === 0 ? active : undefined;

package/dist/stl/stl-manipulator.js

@@ -1144,7 +1144,7 @@ export class STLManipulator extends EventEmitter {
         try {
             if (progressCallback)
                 progressCallback(0, "Starting base extension operation...");
-            console.log(`Extending base of ${stlFilePath} by ${extensionInches} inches`);
+            console.error(`Extending base of ${stlFilePath} by ${extensionInches} inches`);
             // Load the STL file
             const { geometry, boundingBox } = await this.loadSTL(stlFilePath, progressCallback);
             if (!this.activeOperations.get(operationId)) {
@@ -1197,7 +1197,7 @@ export class STLManipulator extends EventEmitter {
                 success: true,
                 output: outputFilePath
             });
-            console.log(`Modified STL saved to ${outputFilePath}`);
+            console.error(`Modified STL saved to ${outputFilePath}`);
             return outputFilePath;
         }
         catch (error) {
@@ -1364,7 +1364,7 @@ export class STLManipulator extends EventEmitter {
             }
             if (progressCallback)
                 progressCallback(20, `Executing slicer: ${slicerPath} ${args.join(' ')}`);
-            console.log(`Executing: ${slicerPath} ${args.join(' ')}`);
+            console.error(`Executing: ${slicerPath} ${args.join(' ')}`);
             // Execute the slicer
             await new Promise((resolve, reject) => {
                 const process = execFile(slicerPath, args, (error, stdout, stderr) => {
@@ -1374,7 +1374,7 @@ export class STLManipulator extends EventEmitter {
                         reject(new Error(`Slicer failed: ${error.message}. Stderr: ${stderr}`));
                     }
                     else {
-                        console.log(`Slicer Stdout: ${stdout}`);
+                        console.error(`Slicer Stdout: ${stdout}`);
                         if (stderr) {
                             console.warn(`Slicer Stderr: ${stderr}`); // Log stderr even on success
                         }
@@ -1382,8 +1382,8 @@ export class STLManipulator extends EventEmitter {
                     }
                 });
                 // Optional: Add listeners for stdout/stderr for real-time progress if slicer provides it
-                // process.stdout?.on('data', (data) => { console.log(`Slicer stdout: ${data}`); });
-                // process.stderr?.on('data', (data) => { console.log(`Slicer stderr: ${data}`); });
+                // process.stdout?.on('data', (data) => { console.error(`Slicer stdout: ${data}`); });
+                // process.stderr?.on('data', (data) => { console.error(`Slicer stderr: ${data}`); });
                 // Check for cancellation periodically
                 const checkCancel = setInterval(() => {
                     if (!this.activeOperations.get(operationId)) {
@@ -1534,7 +1534,7 @@ export class STLManipulator extends EventEmitter {
             const originalVertexCount = geometry.attributes.position.count;
             const mergedGeometry = BufferGeometryUtils.mergeVertices(geometry, tolerance);
             const newVertexCount = mergedGeometry.attributes.position.count;
-            console.log(`Merged vertices: ${originalVertexCount} -> ${newVertexCount} (Tolerance: ${tolerance}mm)`);
+            console.error(`Merged vertices: ${originalVertexCount} -> ${newVertexCount} (Tolerance: ${tolerance}mm)`);
             if (progressCallback)
                 progressCallback(70, `Vertices merged: ${originalVertexCount} -> ${newVertexCount}`);
             if (!this.activeOperations.get(operationId))
@@ -1572,7 +1572,7 @@ export class STLManipulator extends EventEmitter {
             if (center.lengthSq() < 0.0001) { // Already centered (or very close)
                 if (progressCallback)
                     progressCallback(100, "Model is already centered.");
-                console.log("Model already centered. No changes made.");
+                console.error("Model already centered. No changes made.");
                 this.emit('operationComplete', { operationId, type: 'centerModel', success: true, output: stlFilePath, message: "Model already centered." });
                 return stlFilePath; // Return original path
             }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "bambu-printer-mcp",
-  "version": "1.1.23",
+  "version": "1.1.25",
   "description": "MCP server for Bambu Lab 3D printers with STL manipulation, slicing, and print management",
   "main": "dist/index.js",
   "repository": {
@@ -46,13 +46,13 @@
   "author": "David Montgomery",
   "license": "GPL-2.0",
   "dependencies": {
-    "@modelcontextprotocol/sdk": "^1.27.0",
+    "@modelcontextprotocol/sdk": "^1.32.1",
     "bambu-js": "^2.2.2",
     "bambu-node": "3.22.21",
-    "basic-ftp": "^5.0.5",
+    "basic-ftp": "^6.2.2",
     "dotenv": "^16.3.1",
-    "jszip": "^3.10.1",
-    "mqtt": "^5.15.1",
+    "jszip": "^3.10.2",
+    "mqtt": "^5.16.0",
     "patch-package": "8.0.1",
     "three": "^0.173.0",
     "xml2js": "^0.6.2"

package/src/3mf_parser.ts

@@ -86,7 +86,7 @@ async function parseBambuConfig(zip: JSZip): Promise<Partial<BambuSlicerConfig>>
         if (file) {
             configFile = file;
             configContent = await file.async('string');
-            console.log(`Found Bambu config file: ${configFile.name}`);
+            console.error(`Found Bambu config file: ${configFile.name}`);
             break; // Use the first one found (project usually has the most)
         }
     }
@@ -96,14 +96,14 @@ async function parseBambuConfig(zip: JSZip): Promise<Partial<BambuSlicerConfig>>
             // Attempt to parse as JSON
             const jsonData = JSON.parse(configContent);
             const parsedConfig = parseBambuJSONConfig(jsonData);
-            console.log('Bambu config parsed successfully as JSON.');
+            console.error('Bambu config parsed successfully as JSON.');
             return parsedConfig;
         } catch (jsonError: any) {
             console.warn(`Failed to parse ${configFile.name} as JSON: ${jsonError.message}. Attempting INI parse as fallback...`);
             // Fallback: Try parsing as INI if JSON fails (though unlikely based on sample)
             try {
                  const parsedConfig = parseFallbackINIConfig(configContent); // Keep a simple INI parser as fallback
-                 console.log('Bambu config parsed successfully as INI (fallback).');
+                 console.error('Bambu config parsed successfully as INI (fallback).');
                  return parsedConfig;
             } catch (iniError: any) {
                  console.error(`Error parsing Bambu config ${configFile.name} as INI (fallback):`, iniError);
@@ -111,7 +111,7 @@ async function parseBambuConfig(zip: JSZip): Promise<Partial<BambuSlicerConfig>>
             }
         }
     } else {
-        console.log('No Bambu-specific config file found in Metadata directory.');
+        console.error('No Bambu-specific config file found in Metadata directory.');
         return {};
     }
 }
@@ -186,7 +186,7 @@ async function parse3DModelConfig(zip: JSZip): Promise<{ metadata: ThreeMFMetada
             });
         }
 
-        console.log('3dmodel.model parsed successfully.');
+        console.error('3dmodel.model parsed successfully.');
         return { metadata, objects, build: { items: buildItems } };
 
     } catch (error: any) {
@@ -198,14 +198,14 @@ async function parse3DModelConfig(zip: JSZip): Promise<{ metadata: ThreeMFMetada
 export { ThreeMFData };
 
 export async function parse3MF(filePath: string): Promise<ThreeMFData> {
-    console.log(`Parsing 3MF file: ${filePath}`);
+    console.error(`Parsing 3MF file: ${filePath}`);
     try {
         const data = await fs.readFile(filePath);
         const zip = await JSZip.loadAsync(data);
 
         // List files for debugging
         // const fileList = Object.keys(zip.files);
-        // console.log('Files in 3MF:', fileList);
+        // console.error('Files in 3MF:', fileList);
 
         const { metadata, objects, build } = await parse3DModelConfig(zip);
         const bambuConfig = await parseBambuConfig(zip);
@@ -218,7 +218,7 @@ export async function parse3MF(filePath: string): Promise<ThreeMFData> {
             slicerConfig: bambuConfig
         };
 
-        console.log('3MF parsing completed.');
+        console.error('3MF parsing completed.');
         return combinedData;
 
     } catch (error: any) {

package/src/index.ts

@@ -44,6 +44,7 @@ import { BambuImplementation, assertDirectPrintSupported } from "./printers/bamb
 import { inspectPrintFile } from "./safety/print-file.js";
 import { validatePrinterState } from "./safety/printer-state.js";
 import { withPrinterOperation, withPrintSnapshot, uniquePrintName } from "./safety/artifact.js";
+import { detectProfilesRoot } from "./slicer/profile-flatten.js";
 
 dotenv.config();
 
@@ -140,8 +141,6 @@ const BAMBU_MODEL_PRESETS: Record<string, (nozzle: string) => string> = {
   x2d: (n) => `Bambu Lab X2D ${n} nozzle`,
 };
 
-const FILAMENT_PROFILE_DIR =
-  "/Applications/BambuStudio.app/Contents/Resources/profiles/BBL/filament";
 const FILAMENT_MODEL_CODES: Record<string, string> = {
   p1s: "P1S",
   p1p: "P1P",
@@ -212,15 +211,27 @@ let filamentProfileIndexCache: FilamentProfileIndex | null = null;
 function buildFilamentProfileIndex(): FilamentProfileIndex {
   const byName = new Map<string, string>();
   const baseNameByFilamentId = new Map<string, string>();
+  let filamentProfileDir: string;
+  try {
+    const { slicerType, slicerPath } = resolveSlicerConfig(undefined);
+    filamentProfileDir = path.join(detectProfilesRoot(slicerPath, slicerType), "BBL", "filament");
+  } catch {
+    // Profile suggestions are optional; invalid slicer configuration must not hide AMS inventory.
+    return { byName, baseNameByFilamentId };
+  }
 
-  if (!fs.existsSync(FILAMENT_PROFILE_DIR)) {
+  let profileEntries: string[];
+  try {
+    profileEntries = fs.readdirSync(filamentProfileDir);
+  } catch {
+    // Ignore unavailable profile suggestions while keeping live inventory readable.
     return { byName, baseNameByFilamentId };
   }
 
-  for (const entry of fs.readdirSync(FILAMENT_PROFILE_DIR)) {
+  for (const entry of profileEntries) {
     if (!entry.endsWith(".json")) continue;
 
-    const filePath = path.join(FILAMENT_PROFILE_DIR, entry);
+    const filePath = path.join(filamentProfileDir, entry);
 
     try {
       const raw = fs.readFileSync(filePath, "utf8");
@@ -1174,6 +1185,9 @@ class BambuPrinterMCPServer {
             required: ["confirmed"],
           },
         }, { timeout: this.confirmationTimeoutMs });
+        if (response.action === "accept" && response.content?.confirmed !== true) {
+          throw new Error("Hardware confirmation checkbox was not checked. Check it only after inspecting the printer, or cancel. No command was sent.");
+        }
         return response.action === "accept" && response.content?.confirmed === true;
       } catch (error: any) {
         if (isElicitationTimeout(error)) {
@@ -1363,7 +1377,7 @@ class BambuPrinterMCPServer {
       );
     }
 
-    console.log(`3MF has no gcode - auto-slicing with ${slicerType} for ${printModel}`);
+    console.error(`3MF has no gcode - auto-slicing with ${slicerType} for ${printModel}`);
     const autoSliceOptions: BambuSliceOptions = {
       uptodate: true,
       ensureOnBed: true,
@@ -1378,7 +1392,7 @@ class BambuPrinterMCPServer {
       printPreset,
       autoSliceOptions
     );
-    console.log("Auto-sliced to: " + threeMFPath);
+    console.error("Auto-sliced to: " + threeMFPath);
     return { threeMFPath, autoSliced: true };
   }
 
@@ -3956,7 +3970,7 @@ class BambuPrinterMCPServer {
                   'BambuStudio CLI SuperTack bed type is not verified; use a pre-sliced 3MF for SuperTack or choose textured_plate, cool_plate, engineering_plate, or hot_plate.'
                 );
               }
-              console.log(`3MF has no gcode — auto-slicing with ${slicerType} for ${printModel}`);
+              console.error(`3MF has no gcode — auto-slicing with ${slicerType} for ${printModel}`);
               const autoSliceOptions: BambuSliceOptions = {
                 uptodate: true,
                 ensureOnBed: true,
@@ -3987,7 +4001,7 @@ class BambuPrinterMCPServer {
                 printPreset,
                 autoSliceOptions
               );
-              console.log("Auto-sliced to: " + threeMFPath);
+              console.error("Auto-sliced to: " + threeMFPath);
             }
 
             const parsed3MFData = await parse3MF(threeMFPath);

package/src/printers/bambu.ts

@@ -606,10 +606,16 @@ export class BambuImplementation {
       }
 
       const cachedData = await this.printerStore.waitForInitialReport(host, serial, token);
-      const data =
+      const data: Record<string, any> =
         cachedData && Object.keys(cachedData).length > 0
           ? cachedData
           : printer.data;
+      const ctcTemperature = data.device?.ctc?.info?.temp;
+      // CTC packs the current temperature in the low 16 bits and the target in the high 16 bits.
+      const chamberTemperature =
+        typeof ctcTemperature === "number" && Number.isInteger(ctcTemperature) && ctcTemperature >= 0 && ctcTemperature <= 0xffffffff
+          ? ctcTemperature & 0xffff
+          : data.chamber_temper || data.frame_temper || 0;
 
       return {
         status: data.gcode_state || "UNKNOWN",
@@ -623,7 +629,7 @@ export class BambuImplementation {
             actual: data.bed_temper || 0,
             target: data.bed_target_temper || 0,
           },
-          chamber: data.chamber_temper || data.frame_temper || 0,
+          chamber: chamberTemperature,
         },
         print: {
           filename: data.subtask_name || data.gcode_file || "None",

package/src/safety/print-file.ts

@@ -296,7 +296,12 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
       }
       if(['M104','M109','M140','M190','M141','M191'].includes(code)) {
         const args=parameters(argumentsText,'A');
-        for(const key of args.keys()) if(!'SRTA'.includes(key)) fail(`unsupported ${code} temperature parameter ${key}`);
+        // Official A1 and A1 mini start G-code waits with M109 S<target> H<limit>
+        // (S25 H140, S100 H170, S220 H300). H is not a heater target: S stays the
+        // checked target, so H is accepted only within those vendor bounds.
+        const vendorWait=code==='M109' && ['a1','a1mini'].includes(model);
+        for(const key of args.keys()) if(!'SRTA'.includes(key) && !(key==='H' && vendorWait)) fail(`unsupported ${code} temperature parameter ${key}`);
+        if(args.has('H') && (!Number.isFinite(args.get('H')) || args.get('H')!<0 || args.get('H')!>300)) fail(`unsupported ${code} wait parameter H`);
         if(!args.has('S')&&!args.has('R')) fail(`missing ${code} temperature target`);
         const component= ['M104','M109'].includes(code)?'nozzle': ['M140','M190'].includes(code)?'bed':'chamber';
         // Heater T is a physical nozzle, unlike standalone remapped T filament selection.
@@ -307,12 +312,20 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
         if(commonFlush) commonFlushUsed=true;
         for(const key of ['S','R']) if(args.has(key)) heat(component,args.get(key)!,position,args.has('T') || args.has('A'),commonFlush);
       } else if(code==='M620' || code==='M621') {
-        const args=parameters(argumentsText,'MA');
+        const args=parameters(argumentsText,model==='x2d'?'MAB':'MA');
+        // X2D templates use B as a bare material-switch flag, never a target.
+        if(args.has('B') && (model!=='x2d' || !Number.isNaN(args.get('B')!))) fail('unsupported material-switch B flag');
         if(args.has('S')) {
           const position=args.get('S')!;
           if([254,255,65279,65535].includes(position)) {if(code==='M621') {previous=active;active=undefined;}pending=undefined;}
           else {selectsAms=true;requirePosition(position);if(code==='M620') pending=position;else {validateTemperature('nozzle',nozzleTarget,model,[materials[position]]);previous=active;active=position;pending=undefined;}}
         }
+      } else if(code==='M620.22') {
+        // Official X2D runout auto-purge enables the declared project filament.
+        // It supplies no heater target; all explicit heat still uses the shared gate.
+        const args=parameters(argumentsText);
+        if(model!=='x2d' || args.size!==2 || !args.has('I') || args.get('P')!==1) fail('unsupported M620.22 runout purge parameters');
+        requirePosition(args.get('I')!);
       } else if(code==='M620.1' || code==='M620.10') {
         const args=parameters(argumentsText,'E');
         const position=code==='M620.10' && args.get('A')===1 ? pending ?? active : code==='M620.10' && args.get('A')===0 ? active : undefined;

package/src/stl/stl-manipulator.ts

@@ -1477,7 +1477,7 @@ export class STLManipulator extends EventEmitter {
     
     try {
       if (progressCallback) progressCallback(0, "Starting base extension operation...");
-      console.log(`Extending base of ${stlFilePath} by ${extensionInches} inches`);
+      console.error(`Extending base of ${stlFilePath} by ${extensionInches} inches`);
       
       // Load the STL file
       const { geometry, boundingBox } = await this.loadSTL(stlFilePath, progressCallback);
@@ -1554,7 +1554,7 @@ export class STLManipulator extends EventEmitter {
         output: outputFilePath
       });
       
-      console.log(`Modified STL saved to ${outputFilePath}`);
+      console.error(`Modified STL saved to ${outputFilePath}`);
       return outputFilePath;
     } catch (error) {
       console.error("Error extending STL base:", error);
@@ -1733,7 +1733,7 @@ export class STLManipulator extends EventEmitter {
       }
 
       if (progressCallback) progressCallback(20, `Executing slicer: ${slicerPath} ${args.join(' ')}`);
-      console.log(`Executing: ${slicerPath} ${args.join(' ')}`);
+      console.error(`Executing: ${slicerPath} ${args.join(' ')}`);
 
       // Execute the slicer
       await new Promise<void>((resolve, reject) => {
@@ -1743,7 +1743,7 @@ export class STLManipulator extends EventEmitter {
             console.error(`Slicer Stderr: ${stderr}`);
             reject(new Error(`Slicer failed: ${error.message}. Stderr: ${stderr}`));
           } else {
-            console.log(`Slicer Stdout: ${stdout}`);
+            console.error(`Slicer Stdout: ${stdout}`);
              if (stderr) {
                  console.warn(`Slicer Stderr: ${stderr}`); // Log stderr even on success
              }
@@ -1752,8 +1752,8 @@ export class STLManipulator extends EventEmitter {
         });
 
         // Optional: Add listeners for stdout/stderr for real-time progress if slicer provides it
-        // process.stdout?.on('data', (data) => { console.log(`Slicer stdout: ${data}`); });
-        // process.stderr?.on('data', (data) => { console.log(`Slicer stderr: ${data}`); });
+        // process.stdout?.on('data', (data) => { console.error(`Slicer stdout: ${data}`); });
+        // process.stderr?.on('data', (data) => { console.error(`Slicer stderr: ${data}`); });
         
         // Check for cancellation periodically
         const checkCancel = setInterval(() => {
@@ -1938,7 +1938,7 @@ export class STLManipulator extends EventEmitter {
       const mergedGeometry = BufferGeometryUtils.mergeVertices(geometry, tolerance);
       const newVertexCount = mergedGeometry.attributes.position.count;
 
-      console.log(`Merged vertices: ${originalVertexCount} -> ${newVertexCount} (Tolerance: ${tolerance}mm)`);
+      console.error(`Merged vertices: ${originalVertexCount} -> ${newVertexCount} (Tolerance: ${tolerance}mm)`);
       if (progressCallback) progressCallback(70, `Vertices merged: ${originalVertexCount} -> ${newVertexCount}`);
 
       if (!this.activeOperations.get(operationId)) throw new Error("Operation cancelled");
@@ -1982,7 +1982,7 @@ export class STLManipulator extends EventEmitter {
 
       if (center.lengthSq() < 0.0001) { // Already centered (or very close)
           if (progressCallback) progressCallback(100, "Model is already centered.");
-          console.log("Model already centered. No changes made.");
+          console.error("Model already centered. No changes made.");
           this.emit('operationComplete', { operationId, type: 'centerModel', success: true, output: stlFilePath, message: "Model already centered." });
           return stlFilePath; // Return original path
       }