bambu-printer-mcp 1.1.22 → 1.1.24

package/CONTRIBUTORS.md

@@ -6,6 +6,8 @@ Thank you to everyone who builds, tests, reports problems, and shares real print
 
 | Contributor | Contribution |
 | --- | --- |
+| [nitpreet22](https://github.com/nitpreet22) | Fixes rejection of the stock A1/A1 mini `M109 H` startup waits in [#41](https://github.com/DMontgomery40/bambu-printer-mcp/pull/41), contributes temperature and model regressions, and supplies Windows Bambu Studio profile and real sliced A1 job inspection evidence. Their physical print used Bambu Studio, not this MCP change. |
+| [Steavie (steavie)](https://github.com/steavie) | Reports the reversed A1/A1 mini serial prefixes in [#39](https://github.com/DMontgomery40/bambu-printer-mcp/issues/39), with A1 status and configuration evidence that identifies the status and fresh-identity regression. |
 | [JaviOFC](https://github.com/JaviOFC) | Reports the X2D identity rejection in [#36](https://github.com/DMontgomery40/bambu-printer-mcp/issues/36) and supplies current firmware, connection-mode, status-field, serial-prefix, and cloud-job evidence showing that `model_id` can contain a print-job identifier while `model` correctly identifies the printer. |
 | [Izzy Mansurov (sapoepsilon)](https://github.com/sapoepsilon) | Fixes Bambu Studio 02.08 P2S extruder-variant metadata and airduct-command inspection in [#33](https://github.com/DMontgomery40/bambu-printer-mcp/pull/33). Supplies regression tests and offline inspection evidence from four real P2S 0.6 mm PLA/PETG jobs and unsafe mutated copies; this contribution does not claim a physical print. |
 | [Boardy (@boardyai)](https://x.com/boardyai) | Raises the nozzle-verification question that informs the added printer safety checks. |

package/dist/printers/bambu.js

@@ -136,9 +136,9 @@ class TolerantBambuClient extends BambuClient {
             return "P1S";
         if (sn.startsWith("22E"))
             return "P2S";
-        if (sn.startsWith("030"))
-            return "A1";
         if (sn.startsWith("039"))
+            return "A1";
+        if (sn.startsWith("030"))
             return "A1M";
         return undefined;
     }
@@ -563,7 +563,7 @@ export class BambuImplementation {
             isH2ModelName(options.bambuModel);
         const isP2S = serial.startsWith("22E") || isP2SModelName(options.bambuModel);
         const isA1 = String(options.bambuModel ?? "").trim().toLowerCase() === "a1" ||
-            (!options.bambuModel && serial.startsWith("030"));
+            (!options.bambuModel && serial.startsWith("039"));
         const usesH2ProjectFile = isH2 || isP2S;
         const remoteProjectPath = isH2 || isA1 ? remoteFileName : `cache/${remoteFileName}`;
         const remoteUploadPath = `/${remoteProjectPath}`;

package/dist/safety/print-file.js

@@ -405,9 +405,15 @@ export async function inspectPrintFile(filePath, options) {
             }
             if (['M104', 'M109', 'M140', 'M190', 'M141', 'M191'].includes(code)) {
                 const args = parameters(argumentsText, 'A');
+                // Official A1 and A1 mini start G-code waits with M109 S<target> H<limit>
+                // (S25 H140, S100 H170, S220 H300). H is not a heater target: S stays the
+                // checked target, so H is accepted only within those vendor bounds.
+                const vendorWait = code === 'M109' && ['a1', 'a1mini'].includes(model);
                 for (const key of args.keys())
-                    if (!'SRTA'.includes(key))
+                    if (!'SRTA'.includes(key) && !(key === 'H' && vendorWait))
                         fail(`unsupported ${code} temperature parameter ${key}`);
+                if (args.has('H') && (!Number.isFinite(args.get('H')) || args.get('H') < 0 || args.get('H') > 300))
+                    fail(`unsupported ${code} wait parameter H`);
                 if (!args.has('S') && !args.has('R'))
                     fail(`missing ${code} temperature target`);
                 const component = ['M104', 'M109'].includes(code) ? 'nozzle' : ['M140', 'M190'].includes(code) ? 'bed' : 'chamber';

package/dist/safety/printer-state.js

@@ -7,7 +7,7 @@ const MODEL_IDS = {
 };
 const SERIAL_MODELS = {
     "093": "H2S", "094": "H2D", "239": "H2C", "31B": "H2D Pro", "20P": "X2D",
-    "00M": "X1C", "00W": "X1", "03W": "X1E", "01S": "P1P", "01P": "P1S", "22E": "P2S", "030": "A1", "039": "A1 Mini",
+    "00M": "X1C", "00W": "X1", "03W": "X1E", "01S": "P1P", "01P": "P1S", "22E": "P2S", "039": "A1", "030": "A1 Mini",
 };
 function object(value) {
     return !!value && typeof value === "object" && !Array.isArray(value);

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "bambu-printer-mcp",
-  "version": "1.1.22",
+  "version": "1.1.24",
   "description": "MCP server for Bambu Lab 3D printers with STL manipulation, slicing, and print management",
   "main": "dist/index.js",
   "repository": {

package/patches/bambu-node+3.22.21.patch

@@ -29,4 +29,4 @@ index 916e924..6eb81e9 100644
  {if activate_air_filtration[current_extruder] && support_air_filtration}
  M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} 
 -{endif}`],filament_id:"GFL01",filament_flow_ratio:["0.98"],filament_vendor:["Polymaker"]}};var W;(function(e){e[e.PRINTING=0]="PRINTING",e[e.BED_LEVELING=1]="BED_LEVELING",e[e.HEATBED_PREHEATING=2]="HEATBED_PREHEATING",e[e.XY_MECH_MODE_SWEEP=3]="XY_MECH_MODE_SWEEP",e[e.CHANGE_MATERIAL=4]="CHANGE_MATERIAL",e[e.M400_PAUSE=5]="M400_PAUSE",e[e.FILAMENT_RUNOUT_PAUSE=6]="FILAMENT_RUNOUT_PAUSE",e[e.HOTEND_HEATING=7]="HOTEND_HEATING",e[e.EXTRUDE_COMPENSATION_SCAN=8]="EXTRUDE_COMPENSATION_SCAN",e[e.BED_SCAN=9]="BED_SCAN",e[e.FIRST_LAYER_SCAN=10]="FIRST_LAYER_SCAN",e[e.BE_SURFACE_TYPT_IDENTIFICATION=11]="BE_SURFACE_TYPT_IDENTIFICATION",e[e.SCANNER_EXTRINSIC_PARA_CALI=12]="SCANNER_EXTRINSIC_PARA_CALI",e[e.TOOLHEAD_HOMING=13]="TOOLHEAD_HOMING",e[e.NOZZLE_TIP_CLEANING=14]="NOZZLE_TIP_CLEANING",e[e.EXTRUDER_TEMP_PROTECT_CALI=15]="EXTRUDER_TEMP_PROTECT_CALI",e[e.USER_PAUSE=16]="USER_PAUSE",e[e.TOOLHEAD_SHELL_OFF_PAUSE=17]="TOOLHEAD_SHELL_OFF_PAUSE",e[e.SCANNER_LASER_PARA_CALI=18]="SCANNER_LASER_PARA_CALI",e[e.EXTRUDER_ABSOLUTE_FLOW_CALI=19]="EXTRUDER_ABSOLUTE_FLOW_CALI",e[e.HOTEND_TEMPERATURE_ERROR_PAUSE=20]="HOTEND_TEMPERATURE_ERROR_PAUSE",e[e.HEATED_BED_TEMPERATURE_ERROR_PAUSE=21]="HEATED_BED_TEMPERATURE_ERROR_PAUSE",e[e.FILAMENT_UNLOADING=22]="FILAMENT_UNLOADING",e[e.SKIP_STEP_PAUSE=23]="SKIP_STEP_PAUSE",e[e.FILAMENT_LOADING=24]="FILAMENT_LOADING",e[e.MOTOR_NOISE_CALIBRATION=25]="MOTOR_NOISE_CALIBRATION",e[e.AMS_LOST_PAUSE=26]="AMS_LOST_PAUSE",e[e.HEAT_BREAK_FAN_PAUSE=27]="HEAT_BREAK_FAN_PAUSE",e[e.CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE=28]="CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE",e[e.CHAMBER_COOLING=29]="CHAMBER_COOLING",e[e.USER_INSERT_GCODE_PAUSE=30]="USER_INSERT_GCODE_PAUSE",e[e.MOTOR_NOISE_SHOWOFF=31]="MOTOR_NOISE_SHOWOFF",e[e.NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE=32]="NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE",e[e.CUTTER_ERROR_PAUSE=33]="CUTTER_ERROR_PAUSE",e[e.FIRST_LAYER_ERROR_PAUSE=34]="FIRST_LAYER_ERROR_PAUSE",e[e.NOZZLE_CLOG_PAUSE=35]="NOZZLE_CLOG_PAUSE"})(W||(W={}));var X;(function(e){e.SILENT="1",e.NORMAL="2",e.SPORT="3",e.LUDICROUS="4"})(X||(X={}));var V;(function(e){e[e.IDLE=0]="IDLE",e[e.READING=1]="READING",e[e.GCODE_TRANS=2]="GCODE_TRANS",e[e.GCODE_RUNNING=3]="GCODE_RUNNING",e[e.ASSISTANT=4]="ASSISTANT",e[e.SWITCH_FILAMENT=5]="SWITCH_FILAMENT",e[e.HAS_FILAMENT=6]="HAS_FILAMENT"})(V||(V={}));var $;(function(e){e.DOWNLOADING="DOWNLOADING",e.UPGRADE_REQUEST="UPGRADE_REQUEST",e.PRE_FLASH_START="PRE_FLASH_START",e.PRE_FLASH_SUCCESS="PRE_FLASH_SUCCESS"})($||($={}));var Z;(function(e){e.UPGRADE_SUCCESS="UPGRADE_SUCCESS",e.DOWNLOAD_FAIL="DOWNLOAD_FAIL",e.FLASH_FAIL="FLASH_FAIL",e.PRE_FLASH_FAIL="PRE_FLASH_FAIL",e.UPGRADE_FAIL="UPGRADE_FAIL"})(Z||(Z={}));var Y;(function(e){e[e.UpgradeNoError=0]="UpgradeNoError",e[e.UpgradeDownloadFailed=1]="UpgradeDownloadFailed",e[e.UpgradeVerifyFailed=2]="UpgradeVerifyFailed",e[e.UpgradeFlashFailed=3]="UpgradeFlashFailed",e[e.UpgradePrinting=4]="UpgradePrinting"})(Y||(Y={}));var K;(function(e){e[e.UNAVAILABLE=0]="UNAVAILABLE",e[e.IDLE=1]="IDLE",e[e.UPGRADING=2]="UPGRADING",e[e.UPGRADE_FINISHED=3]="UPGRADE_FINISHED"})(K||(K={}));var Q;(function(e){e.PLA="PLA",e.ABS="ABS",e.TPU="TPU",e.PC="PC",e.ASA="ASA",e.PA_CF="PA-CF",e.PA6_CF="PA6-CF",e.PET_CF="PET-CF",e.PETG="PETG",e.PETG_CF="PETG-CF",e.PLA_AERO="PLA-AERO",e.PLA_CF="PLA-CF",e.PPA_CF="PPA-CF",e.PPA_GF="PPA-GF",e.PA="PA",e.HIPS="HIPS",e.PPS="PPS",e.PPS_CF="PPS-CF",e.PVA="PVA",e.PLA_S="PLA-S",e.PA_S="PLA-S"})(Q||(Q={}));function Je(e){return k[e]??null}r(Je,"getFilamentConfig");function h(e){return e.command==="push_status"&&Object.keys(e).length>=40}r(h,"isPushAllCommand");function ee(e){return e.command==="gcode_line"&&!!e?.param?.startsWith("M106")}r(ee,"isUpdateFanCommand");function te(e){return e.command==="push_status"&&e.hasOwnProperty("lights_report")}r(te,"isUpdateLightCommand");function _e(e){return e.command==="push_status"&&(e.hasOwnProperty("spd_lvl")||e.hasOwnProperty("spd_mag"))}r(_e,"isUpdateSpeedCommand");function re(e){return e.command===e.command}r(re,"isUpdateStateCommand");function ae(e){return e.command==="gcode_line"&&!!(e?.param?.startsWith("M104")||e?.param?.startsWith("M140"))}r(ae,"isUpdateTempCommand");function g(e){return!!e?.mc_print&&!!e?.mc_print?.command&&["push_info"].includes(e.mc_print.command)}r(g,"isMCPrintMessage");function ht(e){return e.command==="push_info"}r(ht,"isPushInfoCommand");function gt(e){let[,_,t,l]=e.param.match(/^\[(.+?)](?:\[(.+?)])?\s*(.+)$/)??[];return{sequenceId:Number(e.sequence_id),category:_,subcategory:t,content:l,rawParam:e.param}}r(gt,"getCleanPushInfoCommand");function x(e){return e.command==="get_version"}r(x,"isGetVersionCommand");function z(e){return!!e?.info&&!!e?.info?.command&&["get_version"].includes(e.info.command)}r(z,"isInfoMessage");var E=class E extends f{constructor({fileName:t}){super({param:t});n(this,"category","print");n(this,"command","gcode_file");n(this,"ownsResponse",q)}};r(E,"GCodeFileCommand");var ie=E;var S=class S extends d{constructor({gcodes:t}){super(t);n(this,"command","gcode_line");n(this,"ownsResponse",j)}};r(S,"GCodeLineCommand");var ne=S;var G=class G extends f{constructor(){super();n(this,"category","info");n(this,"command","get_version");n(this,"ownsResponse",x)}};r(G,"GetVersionCommand");var b=G;var M=class M extends f{constructor(){super();n(this,"category","pushing");n(this,"command","pushall");n(this,"ownsResponse",h)}};r(M,"PushAllCommand");var c=M;var le;(function(e){e[e.PART_COOLING_FAN=1]="PART_COOLING_FAN",e[e.AUXILIARY_FAN=2]="AUXILIARY_FAN",e[e.CHAMBER_FAN=3]="CHAMBER_FAN"})(le||(le={}));var L=class L extends d{constructor({fan:t,speed:l}){super([`M106 P${t.toString()} S${255*l/100}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ee)}};r(L,"UpdateFanCommand");var me=L;var F=class F extends f{constructor({light:t,mode:l,loopOptions:a={led_on_time:0,led_off_time:0,loop_times:0,interval_time:0}}){super({led_node:t,led_mode:l,...a});n(this,"category","system");n(this,"command","ledctrl");n(this,"ownsResponse",te)}};r(F,"UpdateLightCommand");var oe=F;var N=class N extends f{constructor({speed:t}){super({param:t.toString()});n(this,"category","print");n(this,"command","print_speed");n(this,"ownsResponse",_e)}};r(N,"UpdateSpeedCommand");var pe=N;var C=class C extends f{constructor({state:t}){super();n(this,"category","print");n(this,"command");n(this,"ownsResponse",re);this.command=t}};r(C,"UpdateStateCommand");var se=C;var fe;(function(e){e.BED="M140",e.EXTRUDER="M104"})(fe||(fe={}));var T=class T extends d{constructor({part:t,temperature:l}){super([`${t} S${l}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ae)}};r(T,"UpdateTempCommand");var ue=T;var p;(function(e){e.X1C="X1C",e.X1="X1",e.X1E="X1E",e.P1P="P1P",e.P1S="P1S",e.A1="A1",e.A1M="A1M"})(p||(p={}));import{createId as xe}from"@paralleldrive/cuid2";var ze=new RegExp(/\.[^/.]+$/),R=class R{constructor(_,t,l,a=new Date){n(this,"_jobData");let o=[p.P1P,p.P1S].includes(l);this._jobData={id:xe(),printerId:t,printerModel:l,name:_.subtask_name.replace(ze,""),fileName:_.subtask_name,gcodeName:_.gcode_file,jobOrigin:_.print_type,totalLayerNumber:_.total_layer_num,totalPrintTime:_.mc_remaining_time,status:_.gcode_state,stage:_.stg_cur,percentDone:_.mc_percent,layerNumber:_.layer_num,remainingTime:_.mc_remaining_time,skippedObjects:_.s_obj,statusHistory:[{status:_.gcode_state,changedAt:a}],speedLevelHistory:[{speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:a}],printingStageHistory:[{stage:_.stg_cur,changedAt:a}],temperatureHistory:[{bedTemp:_.bed_temper,bedTargetTemp:_.bed_target_temper,interiorTemp:o?_.frame_temper:_.chamber_temper,nozzleTemp:_.nozzle_temper,nozzleTargetTemp:_.nozzle_target_temper,changedAt:a}],tempLastUpdatedAt:new Date,errorCodes:_.hms.map(m=>({attr:m.attr,code:m.code,thrownAt:a,layerNumber:_.layer_num})),createdAt:a}}update(_){if(!this._jobData)return;let t=this._jobData,l=new Date,a=[p.P1P,p.P1S].includes(this._jobData.printerModel);_.gcode_state&&t.statusHistory.at(-1)?.status!==_.gcode_state&&t.statusHistory.push({status:_.gcode_state,changedAt:l}),_.spd_lvl&&_.spd_mag&&t.speedLevelHistory.at(-1)?.speedLevel!==_.spd_lvl&&t.speedLevelHistory.push({speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:l}),_.stg_cur&&t.printingStageHistory.at(-1)?.stage!==_.stg_cur&&t.printingStageHistory.push({stage:_.stg_cur,changedAt:l});let o=!!(_.bed_temper||_.bed_target_temper||(a?_.frame_temper:_.chamber_temper)||_.nozzle_temper||_.nozzle_target_temper),m=t.tempLastUpdatedAt.getTime()+5e3<l.getTime();if(o&&m){let s=a?_.frame_temper:_.chamber_temper,u=t.temperatureHistory.at(-1);t.temperatureHistory.push({bedTemp:_.bed_temper??u.bedTemp,bedTargetTemp:_.bed_target_temper??u.bedTargetTemp,interiorTemp:s??u.interiorTemp,nozzleTemp:_.nozzle_temper??u.nozzleTemp,nozzleTargetTemp:_.nozzle_target_temper??u.nozzleTargetTemp,changedAt:l}),t.tempLastUpdatedAt=l}let i={status:_.gcode_state??t.status,stage:_.stg_cur??t.stage,percentDone:_.mc_percent??t.percentDone,layerNumber:_.layer_num??t.layerNumber,remainingTime:_.mc_remaining_time??t.remainingTime,skippedObjects:_.s_obj??t.skippedObjects,errorCodes:_.hms?.map((s,u)=>({attr:s.attr??t.errorCodes[u].attr,code:s.code??t.errorCodes[u].code,thrownAt:l??t.errorCodes[u].thrownAt,layerNumber:_.layer_num??t.errorCodes[u].layerNumber}))??t.errorCodes};this._jobData={...this._jobData,...i}}get data(){return this._jobData}};r(R,"Job");var w=R;import*as ce from"mqtt";import*as ye from"eventemitter3";import{createId as be}from"@paralleldrive/cuid2";function I(e){return new Promise(_=>setTimeout(_,e))}r(I,"sleep");function O(e,_){let t={},l=r((a,o,m)=>{for(let i in o){let s=o[i],u=a[i];if(!(i in a&&JSON.stringify(a[i])===JSON.stringify(o[i]))){if(typeof s=="object"&&s!==null&&u!==null&&!Array.isArray(s)){m[i]=m[i]||{},l(a[i],o[i],m[i]);continue}m[i]=o[i]}}},"checkDifferences");return l(e,_,t),t}r(O,"subtractObject");var D=class D extends ye.EventEmitter{constructor(t){super();n(this,"clientOptions");n(this,"id");n(this,"mqttClient");n(this,"config");n(this,"_printerData");n(this,"_printerStatus");n(this,"jobHistory");n(this,"currentJob");this.clientOptions=t,this.id=be(),this.mqttClient=void 0,this._printerData={modules:[],model:void 0},this._printerStatus="OFFLINE",this.jobHistory=[],this.currentJob=null,this.config={host:t.host,port:t.port??8883,accessToken:t.accessToken,serialNumber:t.serialNumber,throwOnOfflineCommands:t.throwOnOfflineCommands??!1,reconnectInterval:t.reconnectInterval??1e3,connectTimeout:t.connectTimeout??2e3,keepAlive:t.keepAlive??20},this.jobHistory=t.jobHistory??[],this.currentJob=t.currentJob??null}emit(t,...l){return super.emit(t,...l)}off(t,l){return super.off(t,l),this}once(t,l){return super.once(t,l),this}on(t,l){return super.on(t,l),this}async connectMQTT(){return new Promise((t,l)=>{if(this.mqttClient)throw new Error("Can't establish a new connection while running another one!");this.mqttClient=ce.connect(`mqtts://${this.config.host}:${this.config.port}`,{username:"bblp",password:this.config.accessToken,reconnectPeriod:this.clientOptions.reconnectInterval,connectTimeout:this.clientOptions.connectTimeout,keepalive:this.clientOptions.keepAlive,resubscribe:!0,rejectUnauthorized:!1}),this.mqttClient.on("connect",async(...a)=>{await this.onConnect(...a),this.emit("client:connect"),t()}),this.mqttClient.on("disconnect",()=>{this.emit("client:disconnect",!1),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("offline",()=>{this.emit("client:disconnect",!0),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("message",(a,o)=>this.emit("rawMessage",a,o)),this.mqttClient.on("error",a=>{this.emit("client:error",a),l(a)})})}async connect(){return await Promise.all([this.connectMQTT()])}async disconnect(t=!1,l){return new Promise(a=>this.mqttClient?.end(t,l,a))}subscribe(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error(`Unable to subscribe to topic "${t}" while disconnected from printer!`);return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");this.mqttClient.subscribe(t,m=>{if(m)return a(`Error subscribing to topic '${t}': ${m.message}`)});let o=r(async(m,i)=>{m===t&&await this.onMessage(i.toString(),t)},"listener");this.mqttClient.on("message",o),l()})}async executeCommand(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error("Unable to send commands while disconnected from printer!");return new Promise((l,a)=>{t.invoke(this).catch(m=>a(m));let o=setTimeout(()=>{a(new Error("Command execution timed out after 5 seconds."))},5e3);this.on("rawMessage",(m,i)=>{let s=JSON.parse(i.toString()),u=Object.keys(s)[0];if(!(z(s)||g(s)||y(s)))return;let P=s[u];P?.command&&t.ownsResponse(P)&&(clearTimeout(o),l(P))})})}async onConnect(t){await this.subscribe(`device/${this.config.serialNumber}/report`),await I(1e3),await this.executeCommand(new b),(this._printerData.model===p.P1P||this._printerData.model===p.P1S||this._printerData.model===p.A1||this._printerData.model===p.A1M)&&(await this.executeCommand(new c),setInterval(async()=>{await this.executeCommand(new c)},5*60*1e3))}async onMessage(t,l){let a=JSON.parse(t),o=Object.keys(a)[0];if(z(a)||g(a)||y(a)){if(y(a)&&(this.emit("message",l,o,a.print),(h(a.print)||J(a.print))&&(this._printerData={...this._printerData,...a.print},this.emit("printer:dataUpdate",this._printerData,a.print),a.print.gcode_state&&a.print.gcode_state!==this._printerStatus))){let m=this._printerStatus,i=a.print.gcode_state;if(this.emit("printer:statusUpdate",m,i),(i==="PREPARE"||i==="SLICING")&&(i="IDLE"),(m==="PREPARE"||m==="SLICING")&&(m="RUNNING"),(m==="IDLE"||m==="FINISH"||m==="FAILED")&&i==="RUNNING")this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=new w(this._printerData,this.id,this._printerData.model),this.emit("job:start",this.currentJob);else if(m==="RUNNING"&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))i==="FINISH"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"SUCCESS"):i==="FAILED"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"FAILED"):i==="IDLE"&&this.currentJob!==null&&this.emit("job:finish",this.currentJob,"UNEXPECTED"),this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=null;else if(m==="RUNNING"&&i==="PAUSE")this.currentJob&&this.emit("job:pause",this.currentJob,!1);else if(m==="PAUSE"&&i==="RUNNING")this.currentJob&&this.emit("job:unpause",this.currentJob);else if(m==="OFFLINE"&&i==="PAUSE")this.emit("job:offlineRecovery",this.currentJob);else if(!(m==="OFFLINE"&&i==="RUNNING")){if(!((m==="IDLE"||m==="OFFLINE")&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))){if(!((m==="FINISH"||i==="FAILED")&&i==="IDLE")){if(m!==i)throw new Error("Edge case detected while updating printer status!")}}}if(this._printerStatus=a.print.gcode_state,this.currentJob){let s=this.currentJob?.data;this.currentJob.update(a.print),this.emit("job:update",this.currentJob,O(s,this.currentJob.data))}}if(g(a)&&this.emit("message",l,o,a.print),z(a)&&(this.emit("message",l,o,a.info),x(a.info))){let m=[...new Set([...this._printerData.modules,...a.info.module])];this._printerData.modules=m,this.emit("printer:dataUpdate",this._printerData,{modules:m});let i=this._printerData.modules.find(s=>s.name==="ota");if(!i)throw new Error("OTA module version data not found, unable to determine printer model!");if(i.sn.startsWith("00M"))this._printerData.model=p.X1C;else if(i.sn.startsWith("00W"))this._printerData.model=p.X1;else if(i.sn.startsWith("03W"))this._printerData.model=p.X1E;else if(i.sn.startsWith("01S"))this._printerData.model=p.P1P;else if(i.sn.startsWith("01P"))this._printerData.model=p.P1S;else if(i.sn.startsWith("030"))this._printerData.model=p.A1;else if(i.sn.startsWith("039"))this._printerData.model=p.A1M;else throw new Error("Printer model not supported!");this.emit("printer:dataUpdate",this._printerData,{model:this._printerData.model})}}}publish(t){return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");let o=typeof t=="string"?t:JSON.stringify(t),m=`device/${this.config.serialNumber}/request`;this.mqttClient.publish(m,o,i=>{if(i)return a(`Error publishing to topic '${m}': ${i.message}`);l()})})}get data(){return this._printerData}get status(){return this._printerStatus}};r(D,"BambuClient");var de=D;export{f as AbstractCommand,V as AmsRFIDStatus,de as BambuClient,le as Fan,Q as FilamentType,d as GCodeCommand,ie as GCodeFileCommand,ne as GCodeLineCommand,b as GetVersionCommand,w as Job,W as PrintStage,p as PrinterModel,c as PushAllCommand,X as SpeedLevel,me as UpdateFanCommand,oe as UpdateLightCommand,pe as UpdateSpeedCommand,se as UpdateStateCommand,ue as UpdateTempCommand,K as UpgradeDisplayState,Y as UpgradeErrorCode,Z as UpgradeStatusFinishState,$ as UpgradeStatusProgressState,gt as getCleanPushInfoCommand,Je as getFilamentConfig,j as isGCodeLineCommand,q as isGcodeFileCommand,x as isGetVersionCommand,z as isInfoMessage,g as isMCPrintMessage,y as isPrintMessage,Oe as isProjectFileCommand,h as isPushAllCommand,ht as isPushInfoCommand,J as isPushStatusCommand,ee as isUpdateFanCommand,te as isUpdateLightCommand,_e as isUpdateSpeedCommand,re as isUpdateStateCommand,ae as isUpdateTempCommand};
-+{endif}`],filament_id:"GFL01",filament_flow_ratio:["0.98"],filament_vendor:["Polymaker"]}};var W;(function(e){e[e.PRINTING=0]="PRINTING",e[e.BED_LEVELING=1]="BED_LEVELING",e[e.HEATBED_PREHEATING=2]="HEATBED_PREHEATING",e[e.XY_MECH_MODE_SWEEP=3]="XY_MECH_MODE_SWEEP",e[e.CHANGE_MATERIAL=4]="CHANGE_MATERIAL",e[e.M400_PAUSE=5]="M400_PAUSE",e[e.FILAMENT_RUNOUT_PAUSE=6]="FILAMENT_RUNOUT_PAUSE",e[e.HOTEND_HEATING=7]="HOTEND_HEATING",e[e.EXTRUDE_COMPENSATION_SCAN=8]="EXTRUDE_COMPENSATION_SCAN",e[e.BED_SCAN=9]="BED_SCAN",e[e.FIRST_LAYER_SCAN=10]="FIRST_LAYER_SCAN",e[e.BE_SURFACE_TYPT_IDENTIFICATION=11]="BE_SURFACE_TYPT_IDENTIFICATION",e[e.SCANNER_EXTRINSIC_PARA_CALI=12]="SCANNER_EXTRINSIC_PARA_CALI",e[e.TOOLHEAD_HOMING=13]="TOOLHEAD_HOMING",e[e.NOZZLE_TIP_CLEANING=14]="NOZZLE_TIP_CLEANING",e[e.EXTRUDER_TEMP_PROTECT_CALI=15]="EXTRUDER_TEMP_PROTECT_CALI",e[e.USER_PAUSE=16]="USER_PAUSE",e[e.TOOLHEAD_SHELL_OFF_PAUSE=17]="TOOLHEAD_SHELL_OFF_PAUSE",e[e.SCANNER_LASER_PARA_CALI=18]="SCANNER_LASER_PARA_CALI",e[e.EXTRUDER_ABSOLUTE_FLOW_CALI=19]="EXTRUDER_ABSOLUTE_FLOW_CALI",e[e.HOTEND_TEMPERATURE_ERROR_PAUSE=20]="HOTEND_TEMPERATURE_ERROR_PAUSE",e[e.HEATED_BED_TEMPERATURE_ERROR_PAUSE=21]="HEATED_BED_TEMPERATURE_ERROR_PAUSE",e[e.FILAMENT_UNLOADING=22]="FILAMENT_UNLOADING",e[e.SKIP_STEP_PAUSE=23]="SKIP_STEP_PAUSE",e[e.FILAMENT_LOADING=24]="FILAMENT_LOADING",e[e.MOTOR_NOISE_CALIBRATION=25]="MOTOR_NOISE_CALIBRATION",e[e.AMS_LOST_PAUSE=26]="AMS_LOST_PAUSE",e[e.HEAT_BREAK_FAN_PAUSE=27]="HEAT_BREAK_FAN_PAUSE",e[e.CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE=28]="CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE",e[e.CHAMBER_COOLING=29]="CHAMBER_COOLING",e[e.USER_INSERT_GCODE_PAUSE=30]="USER_INSERT_GCODE_PAUSE",e[e.MOTOR_NOISE_SHOWOFF=31]="MOTOR_NOISE_SHOWOFF",e[e.NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE=32]="NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE",e[e.CUTTER_ERROR_PAUSE=33]="CUTTER_ERROR_PAUSE",e[e.FIRST_LAYER_ERROR_PAUSE=34]="FIRST_LAYER_ERROR_PAUSE",e[e.NOZZLE_CLOG_PAUSE=35]="NOZZLE_CLOG_PAUSE"})(W||(W={}));var X;(function(e){e.SILENT="1",e.NORMAL="2",e.SPORT="3",e.LUDICROUS="4"})(X||(X={}));var V;(function(e){e[e.IDLE=0]="IDLE",e[e.READING=1]="READING",e[e.GCODE_TRANS=2]="GCODE_TRANS",e[e.GCODE_RUNNING=3]="GCODE_RUNNING",e[e.ASSISTANT=4]="ASSISTANT",e[e.SWITCH_FILAMENT=5]="SWITCH_FILAMENT",e[e.HAS_FILAMENT=6]="HAS_FILAMENT"})(V||(V={}));var $;(function(e){e.DOWNLOADING="DOWNLOADING",e.UPGRADE_REQUEST="UPGRADE_REQUEST",e.PRE_FLASH_START="PRE_FLASH_START",e.PRE_FLASH_SUCCESS="PRE_FLASH_SUCCESS"})($||($={}));var Z;(function(e){e.UPGRADE_SUCCESS="UPGRADE_SUCCESS",e.DOWNLOAD_FAIL="DOWNLOAD_FAIL",e.FLASH_FAIL="FLASH_FAIL",e.PRE_FLASH_FAIL="PRE_FLASH_FAIL",e.UPGRADE_FAIL="UPGRADE_FAIL"})(Z||(Z={}));var Y;(function(e){e[e.UpgradeNoError=0]="UpgradeNoError",e[e.UpgradeDownloadFailed=1]="UpgradeDownloadFailed",e[e.UpgradeVerifyFailed=2]="UpgradeVerifyFailed",e[e.UpgradeFlashFailed=3]="UpgradeFlashFailed",e[e.UpgradePrinting=4]="UpgradePrinting"})(Y||(Y={}));var K;(function(e){e[e.UNAVAILABLE=0]="UNAVAILABLE",e[e.IDLE=1]="IDLE",e[e.UPGRADING=2]="UPGRADING",e[e.UPGRADE_FINISHED=3]="UPGRADE_FINISHED"})(K||(K={}));var Q;(function(e){e.PLA="PLA",e.ABS="ABS",e.TPU="TPU",e.PC="PC",e.ASA="ASA",e.PA_CF="PA-CF",e.PA6_CF="PA6-CF",e.PET_CF="PET-CF",e.PETG="PETG",e.PETG_CF="PETG-CF",e.PLA_AERO="PLA-AERO",e.PLA_CF="PLA-CF",e.PPA_CF="PPA-CF",e.PPA_GF="PPA-GF",e.PA="PA",e.HIPS="HIPS",e.PPS="PPS",e.PPS_CF="PPS-CF",e.PVA="PVA",e.PLA_S="PLA-S",e.PA_S="PLA-S"})(Q||(Q={}));function Je(e){return k[e]??null}r(Je,"getFilamentConfig");function h(e){return e.command==="push_status"&&Object.keys(e).length>=40}r(h,"isPushAllCommand");function ee(e){return e.command==="gcode_line"&&!!e?.param?.startsWith("M106")}r(ee,"isUpdateFanCommand");function te(e){return e.command==="push_status"&&e.hasOwnProperty("lights_report")}r(te,"isUpdateLightCommand");function _e(e){return e.command==="push_status"&&(e.hasOwnProperty("spd_lvl")||e.hasOwnProperty("spd_mag"))}r(_e,"isUpdateSpeedCommand");function re(e){return e.command===e.command}r(re,"isUpdateStateCommand");function ae(e){return e.command==="gcode_line"&&!!(e?.param?.startsWith("M104")||e?.param?.startsWith("M140"))}r(ae,"isUpdateTempCommand");function g(e){return!!e?.mc_print&&!!e?.mc_print?.command&&["push_info"].includes(e.mc_print.command)}r(g,"isMCPrintMessage");function ht(e){return e.command==="push_info"}r(ht,"isPushInfoCommand");function gt(e){let[,_,t,l]=e.param.match(/^\[(.+?)](?:\[(.+?)])?\s*(.+)$/)??[];return{sequenceId:Number(e.sequence_id),category:_,subcategory:t,content:l,rawParam:e.param}}r(gt,"getCleanPushInfoCommand");function x(e){return e.command==="get_version"}r(x,"isGetVersionCommand");function z(e){return!!e?.info&&!!e?.info?.command&&["get_version"].includes(e.info.command)}r(z,"isInfoMessage");var E=class E extends f{constructor({fileName:t}){super({param:t});n(this,"category","print");n(this,"command","gcode_file");n(this,"ownsResponse",q)}};r(E,"GCodeFileCommand");var ie=E;var S=class S extends d{constructor({gcodes:t}){super(t);n(this,"command","gcode_line");n(this,"ownsResponse",j)}};r(S,"GCodeLineCommand");var ne=S;var G=class G extends f{constructor(){super();n(this,"category","info");n(this,"command","get_version");n(this,"ownsResponse",x)}};r(G,"GetVersionCommand");var b=G;var M=class M extends f{constructor(){super();n(this,"category","pushing");n(this,"command","pushall");n(this,"ownsResponse",h)}};r(M,"PushAllCommand");var c=M;var le;(function(e){e[e.PART_COOLING_FAN=1]="PART_COOLING_FAN",e[e.AUXILIARY_FAN=2]="AUXILIARY_FAN",e[e.CHAMBER_FAN=3]="CHAMBER_FAN"})(le||(le={}));var L=class L extends d{constructor({fan:t,speed:l}){super([`M106 P${t.toString()} S${255*l/100}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ee)}};r(L,"UpdateFanCommand");var me=L;var F=class F extends f{constructor({light:t,mode:l,loopOptions:a={led_on_time:0,led_off_time:0,loop_times:0,interval_time:0}}){super({led_node:t,led_mode:l,...a});n(this,"category","system");n(this,"command","ledctrl");n(this,"ownsResponse",te)}};r(F,"UpdateLightCommand");var oe=F;var N=class N extends f{constructor({speed:t}){super({param:t.toString()});n(this,"category","print");n(this,"command","print_speed");n(this,"ownsResponse",_e)}};r(N,"UpdateSpeedCommand");var pe=N;var C=class C extends f{constructor({state:t}){super();n(this,"category","print");n(this,"command");n(this,"ownsResponse",re);this.command=t}};r(C,"UpdateStateCommand");var se=C;var fe;(function(e){e.BED="M140",e.EXTRUDER="M104"})(fe||(fe={}));var T=class T extends d{constructor({part:t,temperature:l}){super([`${t} S${l}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ae)}};r(T,"UpdateTempCommand");var ue=T;var p;(function(e){e.X1C="X1C",e.X1="X1",e.X1E="X1E",e.P1P="P1P",e.P1S="P1S",e.P2S="P2S",e.H2S="H2S",e.H2D="H2D",e.H2C="H2C",e.H2DPRO="H2DPRO",e.A1="A1",e.A1M="A1M"})(p||(p={}));import{createId as xe}from"@paralleldrive/cuid2";var ze=new RegExp(/\.[^/.]+$/),R=class R{constructor(_,t,l,a=new Date){n(this,"_jobData");let o=[p.P1P,p.P1S].includes(l);this._jobData={id:xe(),printerId:t,printerModel:l,name:_.subtask_name.replace(ze,""),fileName:_.subtask_name,gcodeName:_.gcode_file,jobOrigin:_.print_type,totalLayerNumber:_.total_layer_num,totalPrintTime:_.mc_remaining_time,status:_.gcode_state,stage:_.stg_cur,percentDone:_.mc_percent,layerNumber:_.layer_num,remainingTime:_.mc_remaining_time,skippedObjects:_.s_obj,statusHistory:[{status:_.gcode_state,changedAt:a}],speedLevelHistory:[{speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:a}],printingStageHistory:[{stage:_.stg_cur,changedAt:a}],temperatureHistory:[{bedTemp:_.bed_temper,bedTargetTemp:_.bed_target_temper,interiorTemp:o?_.frame_temper:_.chamber_temper,nozzleTemp:_.nozzle_temper,nozzleTargetTemp:_.nozzle_target_temper,changedAt:a}],tempLastUpdatedAt:new Date,errorCodes:_.hms.map(m=>({attr:m.attr,code:m.code,thrownAt:a,layerNumber:_.layer_num})),createdAt:a}}update(_){if(!this._jobData)return;let t=this._jobData,l=new Date,a=[p.P1P,p.P1S].includes(this._jobData.printerModel);_.gcode_state&&t.statusHistory.at(-1)?.status!==_.gcode_state&&t.statusHistory.push({status:_.gcode_state,changedAt:l}),_.spd_lvl&&_.spd_mag&&t.speedLevelHistory.at(-1)?.speedLevel!==_.spd_lvl&&t.speedLevelHistory.push({speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:l}),_.stg_cur&&t.printingStageHistory.at(-1)?.stage!==_.stg_cur&&t.printingStageHistory.push({stage:_.stg_cur,changedAt:l});let o=!!(_.bed_temper||_.bed_target_temper||(a?_.frame_temper:_.chamber_temper)||_.nozzle_temper||_.nozzle_target_temper),m=t.tempLastUpdatedAt.getTime()+5e3<l.getTime();if(o&&m){let s=a?_.frame_temper:_.chamber_temper,u=t.temperatureHistory.at(-1);t.temperatureHistory.push({bedTemp:_.bed_temper??u.bedTemp,bedTargetTemp:_.bed_target_temper??u.bedTargetTemp,interiorTemp:s??u.interiorTemp,nozzleTemp:_.nozzle_temper??u.nozzleTemp,nozzleTargetTemp:_.nozzle_target_temper??u.nozzleTargetTemp,changedAt:l}),t.tempLastUpdatedAt=l}let i={status:_.gcode_state??t.status,stage:_.stg_cur??t.stage,percentDone:_.mc_percent??t.percentDone,layerNumber:_.layer_num??t.layerNumber,remainingTime:_.mc_remaining_time??t.remainingTime,skippedObjects:_.s_obj??t.skippedObjects,errorCodes:_.hms?.map((s,u)=>({attr:s.attr??t.errorCodes[u].attr,code:s.code??t.errorCodes[u].code,thrownAt:l??t.errorCodes[u].thrownAt,layerNumber:_.layer_num??t.errorCodes[u].layerNumber}))??t.errorCodes};this._jobData={...this._jobData,...i}}get data(){return this._jobData}};r(R,"Job");var w=R;import*as ce from"mqtt";import*as ye from"eventemitter3";import{createId as be}from"@paralleldrive/cuid2";function I(e){return new Promise(_=>setTimeout(_,e))}r(I,"sleep");function O(e,_){let t={},l=r((a,o,m)=>{for(let i in o){let s=o[i],u=a[i];if(!(i in a&&JSON.stringify(a[i])===JSON.stringify(o[i]))){if(typeof s=="object"&&s!==null&&u!==null&&!Array.isArray(s)){m[i]=m[i]||{},l(a[i],o[i],m[i]);continue}m[i]=o[i]}}},"checkDifferences");return l(e,_,t),t}r(O,"subtractObject");var D=class D extends ye.EventEmitter{constructor(t){super();n(this,"clientOptions");n(this,"id");n(this,"mqttClient");n(this,"config");n(this,"_printerData");n(this,"_printerStatus");n(this,"jobHistory");n(this,"currentJob");this.clientOptions=t,this.id=be(),this.mqttClient=void 0,this._printerData={modules:[],model:void 0},this._printerStatus="OFFLINE",this.jobHistory=[],this.currentJob=null,this.config={host:t.host,port:t.port??8883,accessToken:t.accessToken,serialNumber:t.serialNumber,throwOnOfflineCommands:t.throwOnOfflineCommands??!1,reconnectInterval:t.reconnectInterval??1e3,connectTimeout:t.connectTimeout??2e3,keepAlive:t.keepAlive??20},this.jobHistory=t.jobHistory??[],this.currentJob=t.currentJob??null}emit(t,...l){return super.emit(t,...l)}off(t,l){return super.off(t,l),this}once(t,l){return super.once(t,l),this}on(t,l){return super.on(t,l),this}async connectMQTT(){return new Promise((t,l)=>{if(this.mqttClient)throw new Error("Can't establish a new connection while running another one!");this.mqttClient=ce.connect(`mqtts://${this.config.host}:${this.config.port}`,{username:"bblp",password:this.config.accessToken,reconnectPeriod:this.clientOptions.reconnectInterval,connectTimeout:this.clientOptions.connectTimeout,keepalive:this.clientOptions.keepAlive,resubscribe:!0,rejectUnauthorized:!1}),this.mqttClient.on("connect",async(...a)=>{await this.onConnect(...a),this.emit("client:connect"),t()}),this.mqttClient.on("disconnect",()=>{this.emit("client:disconnect",!1),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("offline",()=>{this.emit("client:disconnect",!0),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("message",(a,o)=>this.emit("rawMessage",a,o)),this.mqttClient.on("error",a=>{this.emit("client:error",a),l(a)})})}async connect(){return await Promise.all([this.connectMQTT()])}async disconnect(t=!1,l){return new Promise(a=>this.mqttClient?.end(t,l,a))}subscribe(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error(`Unable to subscribe to topic "${t}" while disconnected from printer!`);return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");this.mqttClient.subscribe(t,m=>{if(m)return a(`Error subscribing to topic '${t}': ${m.message}`)});let o=r(async(m,i)=>{m===t&&await this.onMessage(i.toString(),t)},"listener");this.mqttClient.on("message",o),l()})}async executeCommand(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error("Unable to send commands while disconnected from printer!");return new Promise((l,a)=>{t.invoke(this).catch(m=>a(m));let o=setTimeout(()=>{a(new Error("Command execution timed out after 5 seconds."))},5e3);this.on("rawMessage",(m,i)=>{let s=JSON.parse(i.toString()),u=Object.keys(s)[0];if(!(z(s)||g(s)||y(s)))return;let P=s[u];P?.command&&t.ownsResponse(P)&&(clearTimeout(o),l(P))})})}async onConnect(t){await this.subscribe(`device/${this.config.serialNumber}/report`),await I(1e3),await this.executeCommand(new b),(this._printerData.model===p.P1P||this._printerData.model===p.P1S||this._printerData.model===p.P2S||this._printerData.model===p.A1||this._printerData.model===p.A1M)&&(await this.executeCommand(new c),setInterval(async()=>{await this.executeCommand(new c)},5*60*1e3))}async onMessage(t,l){let a=JSON.parse(t),o=Object.keys(a)[0];if(z(a)||g(a)||y(a)){if(y(a)&&(this.emit("message",l,o,a.print),(h(a.print)||J(a.print))&&(this._printerData={...this._printerData,...a.print},this.emit("printer:dataUpdate",this._printerData,a.print),a.print.gcode_state&&a.print.gcode_state!==this._printerStatus))){let m=this._printerStatus,i=a.print.gcode_state;if(this.emit("printer:statusUpdate",m,i),(i==="PREPARE"||i==="SLICING")&&(i="IDLE"),(m==="PREPARE"||m==="SLICING")&&(m="RUNNING"),(m==="IDLE"||m==="FINISH"||m==="FAILED")&&i==="RUNNING")this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=new w(this._printerData,this.id,this._printerData.model),this.emit("job:start",this.currentJob);else if(m==="RUNNING"&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))i==="FINISH"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"SUCCESS"):i==="FAILED"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"FAILED"):i==="IDLE"&&this.currentJob!==null&&this.emit("job:finish",this.currentJob,"UNEXPECTED"),this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=null;else if(m==="RUNNING"&&i==="PAUSE")this.currentJob&&this.emit("job:pause",this.currentJob,!1);else if(m==="PAUSE"&&i==="RUNNING")this.currentJob&&this.emit("job:unpause",this.currentJob);else if(m==="OFFLINE"&&i==="PAUSE")this.emit("job:offlineRecovery",this.currentJob);else if(!(m==="OFFLINE"&&i==="RUNNING")){if(!((m==="IDLE"||m==="OFFLINE")&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))){if(!((m==="FINISH"||i==="FAILED")&&i==="IDLE")){if(m!==i)void 0}}}if(this._printerStatus=a.print.gcode_state,this.currentJob){let s=this.currentJob?.data;this.currentJob.update(a.print),this.emit("job:update",this.currentJob,O(s,this.currentJob.data))}}if(g(a)&&this.emit("message",l,o,a.print),z(a)&&(this.emit("message",l,o,a.info),x(a.info))){let m=[...new Set([...this._printerData.modules,...a.info.module])];this._printerData.modules=m,this.emit("printer:dataUpdate",this._printerData,{modules:m});let i=this._printerData.modules.find(s=>s.name==="ota");if(!i)return;if(i.sn.startsWith("00M"))this._printerData.model=p.X1C;else if(i.sn.startsWith("00W"))this._printerData.model=p.X1;else if(i.sn.startsWith("03W"))this._printerData.model=p.X1E;else if(i.sn.startsWith("01S"))this._printerData.model=p.P1P;else if(i.sn.startsWith("01P"))this._printerData.model=p.P1S;else if(i.sn.startsWith("22E"))this._printerData.model=p.P2S;else if(i.sn.startsWith("030"))this._printerData.model=p.A1;else if(i.sn.startsWith("039"))this._printerData.model=p.A1M;else if(i.sn.startsWith("093"))this._printerData.model=p.H2S;else if(i.sn.startsWith("094"))this._printerData.model=p.H2D;else if(i.sn.startsWith("239"))this._printerData.model=p.H2C;else if(i.sn.startsWith("31B"))this._printerData.model=p.H2DPRO;this.emit("printer:dataUpdate",this._printerData,{model:this._printerData.model})}}}publish(t){return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");let o=typeof t=="string"?t:JSON.stringify(t),m=`device/${this.config.serialNumber}/request`;this.mqttClient.publish(m,o,i=>{if(i)return a(`Error publishing to topic '${m}': ${i.message}`);l()})})}get data(){return this._printerData}get status(){return this._printerStatus}};r(D,"BambuClient");var de=D;export{f as AbstractCommand,V as AmsRFIDStatus,de as BambuClient,le as Fan,Q as FilamentType,d as GCodeCommand,ie as GCodeFileCommand,ne as GCodeLineCommand,b as GetVersionCommand,w as Job,W as PrintStage,p as PrinterModel,c as PushAllCommand,X as SpeedLevel,me as UpdateFanCommand,oe as UpdateLightCommand,pe as UpdateSpeedCommand,se as UpdateStateCommand,ue as UpdateTempCommand,K as UpgradeDisplayState,Y as UpgradeErrorCode,Z as UpgradeStatusFinishState,$ as UpgradeStatusProgressState,gt as getCleanPushInfoCommand,Je as getFilamentConfig,j as isGCodeLineCommand,q as isGcodeFileCommand,x as isGetVersionCommand,z as isInfoMessage,g as isMCPrintMessage,y as isPrintMessage,Oe as isProjectFileCommand,h as isPushAllCommand,ht as isPushInfoCommand,J as isPushStatusCommand,ee as isUpdateFanCommand,te as isUpdateLightCommand,_e as isUpdateSpeedCommand,re as isUpdateStateCommand,ae as isUpdateTempCommand};
++{endif}`],filament_id:"GFL01",filament_flow_ratio:["0.98"],filament_vendor:["Polymaker"]}};var W;(function(e){e[e.PRINTING=0]="PRINTING",e[e.BED_LEVELING=1]="BED_LEVELING",e[e.HEATBED_PREHEATING=2]="HEATBED_PREHEATING",e[e.XY_MECH_MODE_SWEEP=3]="XY_MECH_MODE_SWEEP",e[e.CHANGE_MATERIAL=4]="CHANGE_MATERIAL",e[e.M400_PAUSE=5]="M400_PAUSE",e[e.FILAMENT_RUNOUT_PAUSE=6]="FILAMENT_RUNOUT_PAUSE",e[e.HOTEND_HEATING=7]="HOTEND_HEATING",e[e.EXTRUDE_COMPENSATION_SCAN=8]="EXTRUDE_COMPENSATION_SCAN",e[e.BED_SCAN=9]="BED_SCAN",e[e.FIRST_LAYER_SCAN=10]="FIRST_LAYER_SCAN",e[e.BE_SURFACE_TYPT_IDENTIFICATION=11]="BE_SURFACE_TYPT_IDENTIFICATION",e[e.SCANNER_EXTRINSIC_PARA_CALI=12]="SCANNER_EXTRINSIC_PARA_CALI",e[e.TOOLHEAD_HOMING=13]="TOOLHEAD_HOMING",e[e.NOZZLE_TIP_CLEANING=14]="NOZZLE_TIP_CLEANING",e[e.EXTRUDER_TEMP_PROTECT_CALI=15]="EXTRUDER_TEMP_PROTECT_CALI",e[e.USER_PAUSE=16]="USER_PAUSE",e[e.TOOLHEAD_SHELL_OFF_PAUSE=17]="TOOLHEAD_SHELL_OFF_PAUSE",e[e.SCANNER_LASER_PARA_CALI=18]="SCANNER_LASER_PARA_CALI",e[e.EXTRUDER_ABSOLUTE_FLOW_CALI=19]="EXTRUDER_ABSOLUTE_FLOW_CALI",e[e.HOTEND_TEMPERATURE_ERROR_PAUSE=20]="HOTEND_TEMPERATURE_ERROR_PAUSE",e[e.HEATED_BED_TEMPERATURE_ERROR_PAUSE=21]="HEATED_BED_TEMPERATURE_ERROR_PAUSE",e[e.FILAMENT_UNLOADING=22]="FILAMENT_UNLOADING",e[e.SKIP_STEP_PAUSE=23]="SKIP_STEP_PAUSE",e[e.FILAMENT_LOADING=24]="FILAMENT_LOADING",e[e.MOTOR_NOISE_CALIBRATION=25]="MOTOR_NOISE_CALIBRATION",e[e.AMS_LOST_PAUSE=26]="AMS_LOST_PAUSE",e[e.HEAT_BREAK_FAN_PAUSE=27]="HEAT_BREAK_FAN_PAUSE",e[e.CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE=28]="CHAMBER_TEMPERATURE_CONTROL_ERROR_PAUSE",e[e.CHAMBER_COOLING=29]="CHAMBER_COOLING",e[e.USER_INSERT_GCODE_PAUSE=30]="USER_INSERT_GCODE_PAUSE",e[e.MOTOR_NOISE_SHOWOFF=31]="MOTOR_NOISE_SHOWOFF",e[e.NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE=32]="NOZZLE_FILAMENT_COVERED_DETECTED_PAUSE",e[e.CUTTER_ERROR_PAUSE=33]="CUTTER_ERROR_PAUSE",e[e.FIRST_LAYER_ERROR_PAUSE=34]="FIRST_LAYER_ERROR_PAUSE",e[e.NOZZLE_CLOG_PAUSE=35]="NOZZLE_CLOG_PAUSE"})(W||(W={}));var X;(function(e){e.SILENT="1",e.NORMAL="2",e.SPORT="3",e.LUDICROUS="4"})(X||(X={}));var V;(function(e){e[e.IDLE=0]="IDLE",e[e.READING=1]="READING",e[e.GCODE_TRANS=2]="GCODE_TRANS",e[e.GCODE_RUNNING=3]="GCODE_RUNNING",e[e.ASSISTANT=4]="ASSISTANT",e[e.SWITCH_FILAMENT=5]="SWITCH_FILAMENT",e[e.HAS_FILAMENT=6]="HAS_FILAMENT"})(V||(V={}));var $;(function(e){e.DOWNLOADING="DOWNLOADING",e.UPGRADE_REQUEST="UPGRADE_REQUEST",e.PRE_FLASH_START="PRE_FLASH_START",e.PRE_FLASH_SUCCESS="PRE_FLASH_SUCCESS"})($||($={}));var Z;(function(e){e.UPGRADE_SUCCESS="UPGRADE_SUCCESS",e.DOWNLOAD_FAIL="DOWNLOAD_FAIL",e.FLASH_FAIL="FLASH_FAIL",e.PRE_FLASH_FAIL="PRE_FLASH_FAIL",e.UPGRADE_FAIL="UPGRADE_FAIL"})(Z||(Z={}));var Y;(function(e){e[e.UpgradeNoError=0]="UpgradeNoError",e[e.UpgradeDownloadFailed=1]="UpgradeDownloadFailed",e[e.UpgradeVerifyFailed=2]="UpgradeVerifyFailed",e[e.UpgradeFlashFailed=3]="UpgradeFlashFailed",e[e.UpgradePrinting=4]="UpgradePrinting"})(Y||(Y={}));var K;(function(e){e[e.UNAVAILABLE=0]="UNAVAILABLE",e[e.IDLE=1]="IDLE",e[e.UPGRADING=2]="UPGRADING",e[e.UPGRADE_FINISHED=3]="UPGRADE_FINISHED"})(K||(K={}));var Q;(function(e){e.PLA="PLA",e.ABS="ABS",e.TPU="TPU",e.PC="PC",e.ASA="ASA",e.PA_CF="PA-CF",e.PA6_CF="PA6-CF",e.PET_CF="PET-CF",e.PETG="PETG",e.PETG_CF="PETG-CF",e.PLA_AERO="PLA-AERO",e.PLA_CF="PLA-CF",e.PPA_CF="PPA-CF",e.PPA_GF="PPA-GF",e.PA="PA",e.HIPS="HIPS",e.PPS="PPS",e.PPS_CF="PPS-CF",e.PVA="PVA",e.PLA_S="PLA-S",e.PA_S="PLA-S"})(Q||(Q={}));function Je(e){return k[e]??null}r(Je,"getFilamentConfig");function h(e){return e.command==="push_status"&&Object.keys(e).length>=40}r(h,"isPushAllCommand");function ee(e){return e.command==="gcode_line"&&!!e?.param?.startsWith("M106")}r(ee,"isUpdateFanCommand");function te(e){return e.command==="push_status"&&e.hasOwnProperty("lights_report")}r(te,"isUpdateLightCommand");function _e(e){return e.command==="push_status"&&(e.hasOwnProperty("spd_lvl")||e.hasOwnProperty("spd_mag"))}r(_e,"isUpdateSpeedCommand");function re(e){return e.command===e.command}r(re,"isUpdateStateCommand");function ae(e){return e.command==="gcode_line"&&!!(e?.param?.startsWith("M104")||e?.param?.startsWith("M140"))}r(ae,"isUpdateTempCommand");function g(e){return!!e?.mc_print&&!!e?.mc_print?.command&&["push_info"].includes(e.mc_print.command)}r(g,"isMCPrintMessage");function ht(e){return e.command==="push_info"}r(ht,"isPushInfoCommand");function gt(e){let[,_,t,l]=e.param.match(/^\[(.+?)](?:\[(.+?)])?\s*(.+)$/)??[];return{sequenceId:Number(e.sequence_id),category:_,subcategory:t,content:l,rawParam:e.param}}r(gt,"getCleanPushInfoCommand");function x(e){return e.command==="get_version"}r(x,"isGetVersionCommand");function z(e){return!!e?.info&&!!e?.info?.command&&["get_version"].includes(e.info.command)}r(z,"isInfoMessage");var E=class E extends f{constructor({fileName:t}){super({param:t});n(this,"category","print");n(this,"command","gcode_file");n(this,"ownsResponse",q)}};r(E,"GCodeFileCommand");var ie=E;var S=class S extends d{constructor({gcodes:t}){super(t);n(this,"command","gcode_line");n(this,"ownsResponse",j)}};r(S,"GCodeLineCommand");var ne=S;var G=class G extends f{constructor(){super();n(this,"category","info");n(this,"command","get_version");n(this,"ownsResponse",x)}};r(G,"GetVersionCommand");var b=G;var M=class M extends f{constructor(){super();n(this,"category","pushing");n(this,"command","pushall");n(this,"ownsResponse",h)}};r(M,"PushAllCommand");var c=M;var le;(function(e){e[e.PART_COOLING_FAN=1]="PART_COOLING_FAN",e[e.AUXILIARY_FAN=2]="AUXILIARY_FAN",e[e.CHAMBER_FAN=3]="CHAMBER_FAN"})(le||(le={}));var L=class L extends d{constructor({fan:t,speed:l}){super([`M106 P${t.toString()} S${255*l/100}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ee)}};r(L,"UpdateFanCommand");var me=L;var F=class F extends f{constructor({light:t,mode:l,loopOptions:a={led_on_time:0,led_off_time:0,loop_times:0,interval_time:0}}){super({led_node:t,led_mode:l,...a});n(this,"category","system");n(this,"command","ledctrl");n(this,"ownsResponse",te)}};r(F,"UpdateLightCommand");var oe=F;var N=class N extends f{constructor({speed:t}){super({param:t.toString()});n(this,"category","print");n(this,"command","print_speed");n(this,"ownsResponse",_e)}};r(N,"UpdateSpeedCommand");var pe=N;var C=class C extends f{constructor({state:t}){super();n(this,"category","print");n(this,"command");n(this,"ownsResponse",re);this.command=t}};r(C,"UpdateStateCommand");var se=C;var fe;(function(e){e.BED="M140",e.EXTRUDER="M104"})(fe||(fe={}));var T=class T extends d{constructor({part:t,temperature:l}){super([`${t} S${l}`]);n(this,"command","gcode_line");n(this,"ownsResponse",ae)}};r(T,"UpdateTempCommand");var ue=T;var p;(function(e){e.X1C="X1C",e.X1="X1",e.X1E="X1E",e.P1P="P1P",e.P1S="P1S",e.P2S="P2S",e.H2S="H2S",e.H2D="H2D",e.H2C="H2C",e.H2DPRO="H2DPRO",e.A1="A1",e.A1M="A1M"})(p||(p={}));import{createId as xe}from"@paralleldrive/cuid2";var ze=new RegExp(/\.[^/.]+$/),R=class R{constructor(_,t,l,a=new Date){n(this,"_jobData");let o=[p.P1P,p.P1S].includes(l);this._jobData={id:xe(),printerId:t,printerModel:l,name:_.subtask_name.replace(ze,""),fileName:_.subtask_name,gcodeName:_.gcode_file,jobOrigin:_.print_type,totalLayerNumber:_.total_layer_num,totalPrintTime:_.mc_remaining_time,status:_.gcode_state,stage:_.stg_cur,percentDone:_.mc_percent,layerNumber:_.layer_num,remainingTime:_.mc_remaining_time,skippedObjects:_.s_obj,statusHistory:[{status:_.gcode_state,changedAt:a}],speedLevelHistory:[{speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:a}],printingStageHistory:[{stage:_.stg_cur,changedAt:a}],temperatureHistory:[{bedTemp:_.bed_temper,bedTargetTemp:_.bed_target_temper,interiorTemp:o?_.frame_temper:_.chamber_temper,nozzleTemp:_.nozzle_temper,nozzleTargetTemp:_.nozzle_target_temper,changedAt:a}],tempLastUpdatedAt:new Date,errorCodes:_.hms.map(m=>({attr:m.attr,code:m.code,thrownAt:a,layerNumber:_.layer_num})),createdAt:a}}update(_){if(!this._jobData)return;let t=this._jobData,l=new Date,a=[p.P1P,p.P1S].includes(this._jobData.printerModel);_.gcode_state&&t.statusHistory.at(-1)?.status!==_.gcode_state&&t.statusHistory.push({status:_.gcode_state,changedAt:l}),_.spd_lvl&&_.spd_mag&&t.speedLevelHistory.at(-1)?.speedLevel!==_.spd_lvl&&t.speedLevelHistory.push({speedLevel:_.spd_lvl,speedMagnitude:_.spd_mag,changedAt:l}),_.stg_cur&&t.printingStageHistory.at(-1)?.stage!==_.stg_cur&&t.printingStageHistory.push({stage:_.stg_cur,changedAt:l});let o=!!(_.bed_temper||_.bed_target_temper||(a?_.frame_temper:_.chamber_temper)||_.nozzle_temper||_.nozzle_target_temper),m=t.tempLastUpdatedAt.getTime()+5e3<l.getTime();if(o&&m){let s=a?_.frame_temper:_.chamber_temper,u=t.temperatureHistory.at(-1);t.temperatureHistory.push({bedTemp:_.bed_temper??u.bedTemp,bedTargetTemp:_.bed_target_temper??u.bedTargetTemp,interiorTemp:s??u.interiorTemp,nozzleTemp:_.nozzle_temper??u.nozzleTemp,nozzleTargetTemp:_.nozzle_target_temper??u.nozzleTargetTemp,changedAt:l}),t.tempLastUpdatedAt=l}let i={status:_.gcode_state??t.status,stage:_.stg_cur??t.stage,percentDone:_.mc_percent??t.percentDone,layerNumber:_.layer_num??t.layerNumber,remainingTime:_.mc_remaining_time??t.remainingTime,skippedObjects:_.s_obj??t.skippedObjects,errorCodes:_.hms?.map((s,u)=>({attr:s.attr??t.errorCodes[u].attr,code:s.code??t.errorCodes[u].code,thrownAt:l??t.errorCodes[u].thrownAt,layerNumber:_.layer_num??t.errorCodes[u].layerNumber}))??t.errorCodes};this._jobData={...this._jobData,...i}}get data(){return this._jobData}};r(R,"Job");var w=R;import*as ce from"mqtt";import*as ye from"eventemitter3";import{createId as be}from"@paralleldrive/cuid2";function I(e){return new Promise(_=>setTimeout(_,e))}r(I,"sleep");function O(e,_){let t={},l=r((a,o,m)=>{for(let i in o){let s=o[i],u=a[i];if(!(i in a&&JSON.stringify(a[i])===JSON.stringify(o[i]))){if(typeof s=="object"&&s!==null&&u!==null&&!Array.isArray(s)){m[i]=m[i]||{},l(a[i],o[i],m[i]);continue}m[i]=o[i]}}},"checkDifferences");return l(e,_,t),t}r(O,"subtractObject");var D=class D extends ye.EventEmitter{constructor(t){super();n(this,"clientOptions");n(this,"id");n(this,"mqttClient");n(this,"config");n(this,"_printerData");n(this,"_printerStatus");n(this,"jobHistory");n(this,"currentJob");this.clientOptions=t,this.id=be(),this.mqttClient=void 0,this._printerData={modules:[],model:void 0},this._printerStatus="OFFLINE",this.jobHistory=[],this.currentJob=null,this.config={host:t.host,port:t.port??8883,accessToken:t.accessToken,serialNumber:t.serialNumber,throwOnOfflineCommands:t.throwOnOfflineCommands??!1,reconnectInterval:t.reconnectInterval??1e3,connectTimeout:t.connectTimeout??2e3,keepAlive:t.keepAlive??20},this.jobHistory=t.jobHistory??[],this.currentJob=t.currentJob??null}emit(t,...l){return super.emit(t,...l)}off(t,l){return super.off(t,l),this}once(t,l){return super.once(t,l),this}on(t,l){return super.on(t,l),this}async connectMQTT(){return new Promise((t,l)=>{if(this.mqttClient)throw new Error("Can't establish a new connection while running another one!");this.mqttClient=ce.connect(`mqtts://${this.config.host}:${this.config.port}`,{username:"bblp",password:this.config.accessToken,reconnectPeriod:this.clientOptions.reconnectInterval,connectTimeout:this.clientOptions.connectTimeout,keepalive:this.clientOptions.keepAlive,resubscribe:!0,rejectUnauthorized:!1}),this.mqttClient.on("connect",async(...a)=>{await this.onConnect(...a),this.emit("client:connect"),t()}),this.mqttClient.on("disconnect",()=>{this.emit("client:disconnect",!1),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("offline",()=>{this.emit("client:disconnect",!0),this.emit("printer:statusUpdate",this._printerStatus,"OFFLINE"),this._printerStatus="OFFLINE",this.currentJob&&this.emit("job:pause",this.currentJob,!0)}),this.mqttClient.on("message",(a,o)=>this.emit("rawMessage",a,o)),this.mqttClient.on("error",a=>{this.emit("client:error",a),l(a)})})}async connect(){return await Promise.all([this.connectMQTT()])}async disconnect(t=!1,l){return new Promise(a=>this.mqttClient?.end(t,l,a))}subscribe(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error(`Unable to subscribe to topic "${t}" while disconnected from printer!`);return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");this.mqttClient.subscribe(t,m=>{if(m)return a(`Error subscribing to topic '${t}': ${m.message}`)});let o=r(async(m,i)=>{m===t&&await this.onMessage(i.toString(),t)},"listener");this.mqttClient.on("message",o),l()})}async executeCommand(t){if(this._printerStatus!=="OFFLINE"&&this.config.throwOnOfflineCommands)throw new Error("Unable to send commands while disconnected from printer!");return new Promise((l,a)=>{t.invoke(this).catch(m=>a(m));let o=setTimeout(()=>{a(new Error("Command execution timed out after 5 seconds."))},5e3);this.on("rawMessage",(m,i)=>{let s=JSON.parse(i.toString()),u=Object.keys(s)[0];if(!(z(s)||g(s)||y(s)))return;let P=s[u];P?.command&&t.ownsResponse(P)&&(clearTimeout(o),l(P))})})}async onConnect(t){await this.subscribe(`device/${this.config.serialNumber}/report`),await I(1e3),await this.executeCommand(new b),(this._printerData.model===p.P1P||this._printerData.model===p.P1S||this._printerData.model===p.P2S||this._printerData.model===p.A1||this._printerData.model===p.A1M)&&(await this.executeCommand(new c),setInterval(async()=>{await this.executeCommand(new c)},5*60*1e3))}async onMessage(t,l){let a=JSON.parse(t),o=Object.keys(a)[0];if(z(a)||g(a)||y(a)){if(y(a)&&(this.emit("message",l,o,a.print),(h(a.print)||J(a.print))&&(this._printerData={...this._printerData,...a.print},this.emit("printer:dataUpdate",this._printerData,a.print),a.print.gcode_state&&a.print.gcode_state!==this._printerStatus))){let m=this._printerStatus,i=a.print.gcode_state;if(this.emit("printer:statusUpdate",m,i),(i==="PREPARE"||i==="SLICING")&&(i="IDLE"),(m==="PREPARE"||m==="SLICING")&&(m="RUNNING"),(m==="IDLE"||m==="FINISH"||m==="FAILED")&&i==="RUNNING")this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=new w(this._printerData,this.id,this._printerData.model),this.emit("job:start",this.currentJob);else if(m==="RUNNING"&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))i==="FINISH"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"SUCCESS"):i==="FAILED"?this.currentJob!==null&&this.emit("job:finish",this.currentJob,"FAILED"):i==="IDLE"&&this.currentJob!==null&&this.emit("job:finish",this.currentJob,"UNEXPECTED"),this.currentJob!==null&&this.jobHistory.push(this.currentJob),this.currentJob=null;else if(m==="RUNNING"&&i==="PAUSE")this.currentJob&&this.emit("job:pause",this.currentJob,!1);else if(m==="PAUSE"&&i==="RUNNING")this.currentJob&&this.emit("job:unpause",this.currentJob);else if(m==="OFFLINE"&&i==="PAUSE")this.emit("job:offlineRecovery",this.currentJob);else if(!(m==="OFFLINE"&&i==="RUNNING")){if(!((m==="IDLE"||m==="OFFLINE")&&(i==="FINISH"||i==="FAILED"||i==="IDLE"))){if(!((m==="FINISH"||i==="FAILED")&&i==="IDLE")){if(m!==i)void 0}}}if(this._printerStatus=a.print.gcode_state,this.currentJob){let s=this.currentJob?.data;this.currentJob.update(a.print),this.emit("job:update",this.currentJob,O(s,this.currentJob.data))}}if(g(a)&&this.emit("message",l,o,a.print),z(a)&&(this.emit("message",l,o,a.info),x(a.info))){let m=[...new Set([...this._printerData.modules,...a.info.module])];this._printerData.modules=m,this.emit("printer:dataUpdate",this._printerData,{modules:m});let i=this._printerData.modules.find(s=>s.name==="ota");if(!i)return;if(i.sn.startsWith("00M"))this._printerData.model=p.X1C;else if(i.sn.startsWith("00W"))this._printerData.model=p.X1;else if(i.sn.startsWith("03W"))this._printerData.model=p.X1E;else if(i.sn.startsWith("01S"))this._printerData.model=p.P1P;else if(i.sn.startsWith("01P"))this._printerData.model=p.P1S;else if(i.sn.startsWith("22E"))this._printerData.model=p.P2S;else if(i.sn.startsWith("039"))this._printerData.model=p.A1;else if(i.sn.startsWith("030"))this._printerData.model=p.A1M;else if(i.sn.startsWith("093"))this._printerData.model=p.H2S;else if(i.sn.startsWith("094"))this._printerData.model=p.H2D;else if(i.sn.startsWith("239"))this._printerData.model=p.H2C;else if(i.sn.startsWith("31B"))this._printerData.model=p.H2DPRO;this.emit("printer:dataUpdate",this._printerData,{model:this._printerData.model})}}}publish(t){return new Promise((l,a)=>{if(!this.mqttClient)return a("Client not connected.");let o=typeof t=="string"?t:JSON.stringify(t),m=`device/${this.config.serialNumber}/request`;this.mqttClient.publish(m,o,i=>{if(i)return a(`Error publishing to topic '${m}': ${i.message}`);l()})})}get data(){return this._printerData}get status(){return this._printerStatus}};r(D,"BambuClient");var de=D;export{f as AbstractCommand,V as AmsRFIDStatus,de as BambuClient,le as Fan,Q as FilamentType,d as GCodeCommand,ie as GCodeFileCommand,ne as GCodeLineCommand,b as GetVersionCommand,w as Job,W as PrintStage,p as PrinterModel,c as PushAllCommand,X as SpeedLevel,me as UpdateFanCommand,oe as UpdateLightCommand,pe as UpdateSpeedCommand,se as UpdateStateCommand,ue as UpdateTempCommand,K as UpgradeDisplayState,Y as UpgradeErrorCode,Z as UpgradeStatusFinishState,$ as UpgradeStatusProgressState,gt as getCleanPushInfoCommand,Je as getFilamentConfig,j as isGCodeLineCommand,q as isGcodeFileCommand,x as isGetVersionCommand,z as isInfoMessage,g as isMCPrintMessage,y as isPrintMessage,Oe as isProjectFileCommand,h as isPushAllCommand,ht as isPushInfoCommand,J as isPushStatusCommand,ee as isUpdateFanCommand,te as isUpdateLightCommand,_e as isUpdateSpeedCommand,re as isUpdateStateCommand,ae as isUpdateTempCommand};

package/src/printers/bambu.ts

@@ -192,8 +192,8 @@ class TolerantBambuClient extends BambuClient {
     if (sn.startsWith("01S")) return "P1P";
     if (sn.startsWith("01P")) return "P1S";
     if (sn.startsWith("22E")) return "P2S";
-    if (sn.startsWith("030")) return "A1";
-    if (sn.startsWith("039")) return "A1M";
+    if (sn.startsWith("039")) return "A1";
+    if (sn.startsWith("030")) return "A1M";
     return undefined;
   }
 
@@ -680,7 +680,7 @@ export class BambuImplementation {
       isH2ModelName(options.bambuModel);
     const isP2S = serial.startsWith("22E") || isP2SModelName(options.bambuModel);
     const isA1 = String(options.bambuModel ?? "").trim().toLowerCase() === "a1" ||
-      (!options.bambuModel && serial.startsWith("030"));
+      (!options.bambuModel && serial.startsWith("039"));
     const usesH2ProjectFile = isH2 || isP2S;
     const remoteProjectPath = isH2 || isA1 ? remoteFileName : `cache/${remoteFileName}`;
     const remoteUploadPath = `/${remoteProjectPath}`;

package/src/safety/print-file.ts

@@ -296,7 +296,12 @@ export async function inspectPrintFile(filePath: string, options: {model:string;
       }
       if(['M104','M109','M140','M190','M141','M191'].includes(code)) {
         const args=parameters(argumentsText,'A');
-        for(const key of args.keys()) if(!'SRTA'.includes(key)) fail(`unsupported ${code} temperature parameter ${key}`);
+        // Official A1 and A1 mini start G-code waits with M109 S<target> H<limit>
+        // (S25 H140, S100 H170, S220 H300). H is not a heater target: S stays the
+        // checked target, so H is accepted only within those vendor bounds.
+        const vendorWait=code==='M109' && ['a1','a1mini'].includes(model);
+        for(const key of args.keys()) if(!'SRTA'.includes(key) && !(key==='H' && vendorWait)) fail(`unsupported ${code} temperature parameter ${key}`);
+        if(args.has('H') && (!Number.isFinite(args.get('H')) || args.get('H')!<0 || args.get('H')!>300)) fail(`unsupported ${code} wait parameter H`);
         if(!args.has('S')&&!args.has('R')) fail(`missing ${code} temperature target`);
         const component= ['M104','M109'].includes(code)?'nozzle': ['M140','M190'].includes(code)?'bed':'chamber';
         // Heater T is a physical nozzle, unlike standalone remapped T filament selection.

package/src/safety/printer-state.ts

@@ -8,7 +8,7 @@ const MODEL_IDS: Record<string, string> = {
 };
 const SERIAL_MODELS: Record<string, string> = {
   "093": "H2S", "094": "H2D", "239": "H2C", "31B": "H2D Pro", "20P": "X2D",
-  "00M": "X1C", "00W": "X1", "03W": "X1E", "01S": "P1P", "01P": "P1S", "22E": "P2S", "030": "A1", "039": "A1 Mini",
+  "00M": "X1C", "00W": "X1", "03W": "X1E", "01S": "P1P", "01P": "P1S", "22E": "P2S", "039": "A1", "030": "A1 Mini",
 };
 
 function object(value: unknown): value is Record<string, any> {