bambu-printer-mcp 1.0.0

package/LICENSE

@@ -0,0 +1,339 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+                            NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

package/README.md

@@ -0,0 +1,85 @@
+# bambu-printer-mcp
+
+MCP server for Bambu Lab 3D printers. Provides STL manipulation, BambuStudio slicing, and direct printer control over MQTT/FTP.
+
+Stripped-down, Bambu-focused fork of [mcp-3D-printer-server](https://github.com/DMontgomery40/mcp-3D-printer-server).
+
+## Features
+
+- **Printer control**: status, cancel, temperature, file management via MQTT (bambu-node)
+- **Print 3MF**: upload via FTP, send `project_file` command with proper AMS mapping
+- **Auto-slice**: unsliced 3MF files are automatically sliced with BambuStudio CLI
+- **STL tools**: scale, rotate, extend base, merge vertices, center, lay flat, info
+- **Blender bridge**: optional integration for advanced model edits
+- **Transports**: stdio and Streamable HTTP
+
+## Quick Start
+
+```bash
+npx bambu-printer-mcp
+```
+
+Or install globally:
+
+```bash
+npm install -g bambu-printer-mcp
+```
+
+### Claude Desktop config
+
+```json
+{
+  "mcpServers": {
+    "bambu-printer": {
+      "command": "npx",
+      "args": ["-y", "bambu-printer-mcp"],
+      "env": {
+        "PRINTER_HOST": "192.168.1.100",
+        "BAMBU_SERIAL": "your_serial",
+        "BAMBU_TOKEN": "your_token"
+      }
+    }
+  }
+}
+```
+
+## Environment Variables
+
+| Variable | Default | Description |
+|----------|---------|-------------|
+| `PRINTER_HOST` | `localhost` | Printer IP address |
+| `BAMBU_SERIAL` | | Printer serial number |
+| `BAMBU_TOKEN` | | Printer access token |
+| `SLICER_PATH` | BambuStudio macOS path | Path to slicer executable |
+| `SLICER_PROFILE` | | Path to slicer profile |
+| `MCP_TRANSPORT` | `stdio` | `stdio` or `streamable-http` |
+
+## Tools
+
+### Printer
+- `get_printer_status` - Temperatures, print progress, AMS status
+- `print_3mf` - Upload and print a 3MF file (auto-slices if needed)
+- `cancel_print` - Cancel current print
+- `set_temperature` - Set bed/nozzle temperature
+- `start_print_job` - Start a gcode file already on the printer
+- `upload_file` / `upload_gcode` - Upload files to printer
+- `list_printer_files` - List files on printer SD card
+
+### STL Manipulation
+- `get_stl_info` - Bounding box, face count, dimensions
+- `scale_stl` - Scale by X/Y/Z factors
+- `rotate_stl` - Rotate by X/Y/Z angles
+- `extend_stl_base` - Extend the base of a model
+- `merge_vertices` - Merge close vertices
+- `center_model` - Center at origin
+- `lay_flat` - Orient largest face down
+
+### Slicing
+- `slice_stl` - Slice STL/3MF with BambuStudio (or PrusaSlicer, OrcaSlicer, Cura)
+
+### Advanced
+- `blender_mcp_edit_model` - Bridge to Blender MCP for advanced edits
+
+## License
+
+GPL-2.0

package/dist/3mf_parser.d.ts

@@ -0,0 +1,3 @@
+import { ThreeMFData } from './types.js';
+export { ThreeMFData };
+export declare function parse3MF(filePath: string): Promise<ThreeMFData>;

package/dist/3mf_parser.js

@@ -0,0 +1,216 @@
+import JSZip from 'jszip';
+import { parseStringPromise } from 'xml2js';
+import * as fs from 'fs/promises';
+// Parses Bambu Studio's JSON config data
+function parseBambuJSONConfig(jsonData) {
+    const config = {};
+    const amsMapping = {};
+    // Map known keys, converting types as needed
+    if (jsonData.layer_height !== undefined)
+        config.layer_height = parseFloat(jsonData.layer_height);
+    if (jsonData.initial_layer_print_height !== undefined)
+        config.first_layer_height = parseFloat(jsonData.initial_layer_print_height);
+    if (jsonData.sparse_infill_density !== undefined)
+        config.sparse_infill_density = parseFloat(jsonData.sparse_infill_density);
+    if (jsonData.sparse_infill_pattern !== undefined)
+        config.sparse_infill_pattern = String(jsonData.sparse_infill_pattern);
+    if (jsonData.enable_support !== undefined)
+        config.support_enabled = String(jsonData.enable_support) === '1' || String(jsonData.enable_support).toLowerCase() === 'true';
+    if (jsonData.support_type !== undefined)
+        config.support_type = String(jsonData.support_type);
+    if (jsonData.support_angle !== undefined)
+        config.support_threshold_angle = parseFloat(jsonData.support_angle);
+    if (jsonData.raft_layers !== undefined)
+        config.raft_layers = parseInt(String(jsonData.raft_layers), 10);
+    if (jsonData.brim_width !== undefined)
+        config.brim_width = parseFloat(jsonData.brim_width);
+    if (jsonData.wall_loops !== undefined)
+        config.wall_loops = parseInt(String(jsonData.wall_loops), 10);
+    if (jsonData.top_shell_layers !== undefined)
+        config.top_shell_layers = parseInt(String(jsonData.top_shell_layers), 10);
+    if (jsonData.bottom_shell_layers !== undefined)
+        config.bottom_shell_layers = parseInt(String(jsonData.bottom_shell_layers), 10);
+    // Temperatures (handle potential arrays)
+    if (Array.isArray(jsonData.nozzle_temperature) && jsonData.nozzle_temperature.length > 0) {
+        config.nozzle_temperature = jsonData.nozzle_temperature.map((t) => parseFloat(String(t)));
+    }
+    else if (jsonData.nozzle_temperature !== undefined) {
+        config.nozzle_temperature = [parseFloat(String(jsonData.nozzle_temperature))];
+    }
+    // Bed Temp (prefer initial layer temp)
+    let bedTempKey = jsonData.hot_plate_temp_initial_layer !== undefined ? 'hot_plate_temp_initial_layer' : 'hot_plate_temp';
+    if (jsonData[bedTempKey] !== undefined) {
+        if (Array.isArray(jsonData[bedTempKey]) && jsonData[bedTempKey].length > 0) {
+            config.bed_temperature = parseFloat(String(jsonData[bedTempKey][0]));
+        }
+        else {
+            config.bed_temperature = parseFloat(String(jsonData[bedTempKey]));
+        }
+    }
+    // Filaments and Flow (handle potential arrays)
+    if (Array.isArray(jsonData.filament_type) && jsonData.filament_type.length > 0) {
+        config.filament_type = jsonData.filament_type.map(String);
+    }
+    if (Array.isArray(jsonData.filament_flow_ratio) && jsonData.filament_flow_ratio.length > 0) {
+        config.flow_ratio = jsonData.filament_flow_ratio.map((f) => parseFloat(String(f)));
+    }
+    // AMS Mapping (derive from filament_settings_id order)
+    if (Array.isArray(jsonData.filament_settings_id) && jsonData.filament_settings_id.length > 0) {
+        jsonData.filament_settings_id.forEach((filamentId, index) => {
+            // Map filament ID (e.g., "Generic PLA @BBL P1P") to its index (assumed AMS slot)
+            if (filamentId) { // Ensure filamentId is not empty
+                amsMapping[filamentId] = index;
+            }
+        });
+        if (Object.keys(amsMapping).length > 0) {
+            config.ams_mapping = amsMapping;
+        }
+    }
+    // Store remaining keys found in the config
+    for (const key in jsonData) {
+        if (!config.hasOwnProperty(key)) {
+            // Simple assignment for remaining keys, preserving original type if possible
+            config[key] = jsonData[key];
+        }
+    }
+    return config;
+}
+async function parseBambuConfig(zip) {
+    // Look for common Bambu config file names
+    const potentialFiles = ['Metadata/project_settings.config', 'Metadata/model_settings.config', 'Metadata/slice_info.config'];
+    let configFile = null;
+    let configContent = '';
+    for (const name of potentialFiles) {
+        const file = zip.file(name);
+        if (file) {
+            configFile = file;
+            configContent = await file.async('string');
+            console.log(`Found Bambu config file: ${configFile.name}`);
+            break; // Use the first one found (project usually has the most)
+        }
+    }
+    if (configFile && configContent) {
+        try {
+            // Attempt to parse as JSON
+            const jsonData = JSON.parse(configContent);
+            const parsedConfig = parseBambuJSONConfig(jsonData);
+            console.log('Bambu config parsed successfully as JSON.');
+            return parsedConfig;
+        }
+        catch (jsonError) {
+            console.warn(`Failed to parse ${configFile.name} as JSON: ${jsonError.message}. Attempting INI parse as fallback...`);
+            // Fallback: Try parsing as INI if JSON fails (though unlikely based on sample)
+            try {
+                const parsedConfig = parseFallbackINIConfig(configContent); // Keep a simple INI parser as fallback
+                console.log('Bambu config parsed successfully as INI (fallback).');
+                return parsedConfig;
+            }
+            catch (iniError) {
+                console.error(`Error parsing Bambu config ${configFile.name} as INI (fallback):`, iniError);
+                return {};
+            }
+        }
+    }
+    else {
+        console.log('No Bambu-specific config file found in Metadata directory.');
+        return {};
+    }
+}
+// Fallback INI parser (Simplified version of the previous one)
+function parseFallbackINIConfig(configContent) {
+    const config = {};
+    const lines = configContent.split(/\r?\n/);
+    for (const line of lines) {
+        const trimmedLine = line.trim();
+        if (!trimmedLine || trimmedLine.startsWith('#') || trimmedLine.startsWith(';'))
+            continue;
+        const equalsIndex = trimmedLine.indexOf('=');
+        if (equalsIndex === -1)
+            continue;
+        const key = trimmedLine.substring(0, equalsIndex).trim();
+        const value = trimmedLine.substring(equalsIndex + 1).trim();
+        // Simple assignment - no type conversion here for fallback
+        config[key] = value;
+    }
+    return config;
+}
+async function parse3DModelConfig(zip) {
+    const modelFile = zip.file('3D/3dmodel.model');
+    if (!modelFile) {
+        throw new Error('3D/3dmodel.model not found in 3MF archive');
+    }
+    const modelContent = await modelFile.async('string');
+    try {
+        const parsedXml = await parseStringPromise(modelContent, {
+            explicitArray: false,
+            mergeAttrs: true,
+            charkey: 'value'
+        });
+        const modelData = parsedXml.model;
+        if (!modelData) {
+            throw new Error('Invalid 3dmodel.model format: <model> tag not found.');
+        }
+        const metadata = { unit: modelData.unit || 'millimeter' };
+        if (modelData.metadata) {
+            const metas = Array.isArray(modelData.metadata) ? modelData.metadata : [modelData.metadata];
+            metas.forEach((meta) => {
+                if (meta.name && meta.value !== undefined) {
+                    metadata[meta.name] = String(meta.value);
+                }
+            });
+        }
+        const objects = [];
+        if (modelData.resources?.object) {
+            const resources = Array.isArray(modelData.resources.object) ? modelData.resources.object : [modelData.resources.object];
+            resources.forEach((objResource) => {
+                objects.push({
+                    id: objResource.id,
+                    name: objResource.name,
+                    type: objResource.type || 'model'
+                    // Actual mesh data (vertices, triangles) is nested deeper if needed
+                });
+            });
+        }
+        const buildItems = [];
+        if (modelData.build?.item) {
+            const items = Array.isArray(modelData.build.item) ? modelData.build.item : [modelData.build.item];
+            items.forEach((item) => {
+                buildItems.push({
+                    objectId: item.objectid,
+                    transform: item.transform
+                });
+            });
+        }
+        console.log('3dmodel.model parsed successfully.');
+        return { metadata, objects, build: { items: buildItems } };
+    }
+    catch (error) {
+        console.error('Error parsing 3dmodel.model XML:', error);
+        throw new Error(`Failed to parse 3dmodel.model: ${error.message}`);
+    }
+}
+export async function parse3MF(filePath) {
+    console.log(`Parsing 3MF file: ${filePath}`);
+    try {
+        const data = await fs.readFile(filePath);
+        const zip = await JSZip.loadAsync(data);
+        // List files for debugging
+        // const fileList = Object.keys(zip.files);
+        // console.log('Files in 3MF:', fileList);
+        const { metadata, objects, build } = await parse3DModelConfig(zip);
+        const bambuConfig = await parseBambuConfig(zip);
+        // Combine data into the final structure
+        const combinedData = {
+            metadata,
+            objects,
+            build,
+            slicerConfig: bambuConfig
+        };
+        console.log('3MF parsing completed.');
+        return combinedData;
+    }
+    catch (error) {
+        console.error(`Error parsing 3MF file ${filePath}:`, error);
+        throw new Error(`Failed to parse 3MF file: ${error.message}`);
+    }
+}

package/dist/index.d.ts

@@ -0,0 +1,2 @@
+#!/usr/bin/env node
+export {};