ballistics-engine 0.38.0 → 0.40.0

package/ballistics_engine.js

@@ -1,9 +1,754 @@
 /* @ts-self-types="./ballistics_engine.d.ts" */
-import * as wasm from "./ballistics_engine_bg.wasm";
-import { __wbg_set_wasm } from "./ballistics_engine_bg.js";
-
-__wbg_set_wasm(wasm);
-wasm.__wbindgen_start();
-export {
-    Calculator, WasmBallistics, bridgeCall
-} from "./ballistics_engine_bg.js";
+
+/**
+ * Object-oriented calculator for programmatic use
+ * Provides a type-safe, fluent API alternative to the CLI interface
+ */
+export class Calculator {
+    static __wrap(ptr) {
+        const obj = Object.create(Calculator.prototype);
+        obj.__wbg_ptr = ptr;
+        CalculatorFinalization.register(obj, obj.__wbg_ptr, obj);
+        return obj;
+    }
+    __destroy_into_raw() {
+        const ptr = this.__wbg_ptr;
+        this.__wbg_ptr = 0;
+        CalculatorFinalization.unregister(this);
+        return ptr;
+    }
+    free() {
+        const ptr = this.__destroy_into_raw();
+        wasm.__wbg_calculator_free(ptr, 0);
+    }
+    /**
+     * Add a downrange wind segment: `speed_mph` from `direction_deg`
+     * (wind-FROM: 0 = headwind, 90 = from the right) out to `until_yards`.
+     * Each segment applies from the previous boundary to `until_yards`; wind is
+     * zero beyond the last segment. When any segment is added it overrides the
+     * scalar `setWind` value. Repeatable.
+     * @param {number} speed_mph
+     * @param {number} direction_deg
+     * @param {number} until_yards
+     * @returns {Calculator}
+     */
+    addWindSegment(speed_mph, direction_deg, until_yards) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_addWindSegment(ptr, speed_mph, direction_deg, until_yards);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * Calculate trajectory and return result as JavaScript object
+     * Returns: { range_yards, drop_inches, windage_inches, velocity_fps, energy_ftlb, time_sec }
+     * @param {number} range_yards
+     * @returns {any}
+     */
+    calculateTrajectory(range_yards) {
+        const ret = wasm.calculator_calculateTrajectory(this.__wbg_ptr, range_yards);
+        if (ret[2]) {
+            throw takeFromExternrefTable0(ret[1]);
+        }
+        return takeFromExternrefTable0(ret[0]);
+    }
+    /**
+     * Remove all downrange wind segments (reverts to the scalar `setWind`).
+     * @returns {Calculator}
+     */
+    clearWindSegments() {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_clearWindSegments(ptr);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {boolean} enabled
+     * @param {number | null} [latitude]
+     * @returns {Calculator}
+     */
+    enableCoriolis(enabled, latitude) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_enableCoriolis(ptr, enabled, !isLikeNone(latitude), isLikeNone(latitude) ? 0 : latitude);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {boolean} enabled
+     * @param {number | null} [twist_rate]
+     * @returns {Calculator}
+     */
+    enableSpinDrift(enabled, twist_rate) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_enableSpinDrift(ptr, enabled, !isLikeNone(twist_rate), isLikeNone(twist_rate) ? 0 : twist_rate);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * Get full trajectory table as array of points
+     * Returns array of: [{ range_yards, drop_inches, windage_inches, velocity_fps, energy_ftlb, time_sec }, ...]
+     * @returns {any}
+     */
+    getFullTrajectory() {
+        const ret = wasm.calculator_getFullTrajectory(this.__wbg_ptr);
+        if (ret[2]) {
+            throw takeFromExternrefTable0(ret[1]);
+        }
+        return takeFromExternrefTable0(ret[0]);
+    }
+    /**
+     * Solve all the way to the requested range instead of stopping at ground impact.
+     *
+     * Without this, `calculateTrajectory(range)` returns the closest point it actually
+     * solved, which for a typical .308 is around 516 yd — short of a 1000 yd request, and
+     * reported only by the `range_yards` field of the returned object.
+     * @param {boolean} ignore
+     * @returns {Calculator}
+     */
+    ignoreGroundImpact(ignore) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_ignoreGroundImpact(ptr, ignore);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * Create a new calculator with default values
+     * Defaults: .308 Winchester 168gr at 2700 fps, standard atmosphere
+     */
+    constructor() {
+        const ret = wasm.calculator_new();
+        this.__wbg_ptr = ret;
+        CalculatorFinalization.register(this, this.__wbg_ptr, this);
+        return this;
+    }
+    /**
+     * @param {number} altitude_ft
+     * @returns {Calculator}
+     */
+    setAltitude(altitude_ft) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setAltitude(ptr, altitude_ft);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} bc
+     * @returns {Calculator}
+     */
+    setBC(bc) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setBC(ptr, bc);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * Height of the bore above the ground, in inches (default 60 = 5 ft). The solve stops
+     * when the projectile falls this far below the muzzle, so raising it pushes the
+     * ground-impact cutoff further downrange. Use [`Self::ignore_ground_impact`] to remove
+     * the cutoff entirely rather than setting an implausible height.
+     * @param {number} height_inches
+     * @returns {Calculator}
+     */
+    setBoreHeight(height_inches) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setBoreHeight(ptr, height_inches);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} diameter_inches
+     * @returns {Calculator}
+     */
+    setDiameter(diameter_inches) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setDiameter(ptr, diameter_inches);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {string} model
+     * @returns {Calculator}
+     */
+    setDragModel(model) {
+        const ptr = this.__destroy_into_raw();
+        const ptr0 = passStringToWasm0(model, wasm.__wbindgen_malloc, wasm.__wbindgen_realloc);
+        const len0 = WASM_VECTOR_LEN;
+        const ret = wasm.calculator_setDragModel(ptr, ptr0, len0);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} humidity
+     * @returns {Calculator}
+     */
+    setHumidity(humidity) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setHumidity(ptr, humidity);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} mass_grains
+     * @returns {Calculator}
+     */
+    setMass(mass_grains) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setMass(ptr, mass_grains);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} range_yards
+     * @returns {Calculator}
+     */
+    setMaxRange(range_yards) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setMaxRange(ptr, range_yards);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} pressure_inhg
+     * @returns {Calculator}
+     */
+    setPressure(pressure_inhg) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setPressure(ptr, pressure_inhg);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * MBA-1368: compass bearing of the shot (degrees, 0 = north, 90 = east) —
+     * required by `setWindReference("compass")`; also feeds Coriolis when enabled.
+     * @param {number} bearing_deg
+     * @returns {Calculator}
+     */
+    setShotDirection(bearing_deg) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setShotDirection(ptr, bearing_deg);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} height_inches
+     * @returns {Calculator}
+     */
+    setSightHeight(height_inches) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setSightHeight(ptr, height_inches);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} temp_f
+     * @returns {Calculator}
+     */
+    setTemperature(temp_f) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setTemperature(ptr, temp_f);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} velocity_fps
+     * @returns {Calculator}
+     */
+    setVelocity(velocity_fps) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setVelocity(ptr, velocity_fps);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} speed_mph
+     * @param {number} direction_deg
+     * @returns {Calculator}
+     */
+    setWind(speed_mph, direction_deg) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setWind(ptr, speed_mph, direction_deg);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * MBA-1368: choose the wind entry frame — "shooter" (default; wind-FROM angles
+     * relative to the line of fire) or "compass" (earth-fixed bearings, 0 = north,
+     * covering `setWind` AND every `addWindSegment` direction, re-referenced against
+     * the shot azimuth at solve time). Compass mode requires `setShotDirection`;
+     * invalid values surface when the command runs. Additive method — no existing
+     * signature changed.
+     * @param {string} mode
+     * @returns {Calculator}
+     */
+    setWindReference(mode) {
+        const ptr = this.__destroy_into_raw();
+        const ptr0 = passStringToWasm0(mode, wasm.__wbindgen_malloc, wasm.__wbindgen_realloc);
+        const len0 = WASM_VECTOR_LEN;
+        const ret = wasm.calculator_setWindReference(ptr, ptr0, len0);
+        return Calculator.__wrap(ret);
+    }
+    /**
+     * @param {number} range_yards
+     * @returns {Calculator}
+     */
+    setZeroRange(range_yards) {
+        const ptr = this.__destroy_into_raw();
+        const ret = wasm.calculator_setZeroRange(ptr, range_yards);
+        return Calculator.__wrap(ret);
+    }
+}
+if (Symbol.dispose) Calculator.prototype[Symbol.dispose] = Calculator.prototype.free;
+
+export class WasmBallistics {
+    __destroy_into_raw() {
+        const ptr = this.__wbg_ptr;
+        this.__wbg_ptr = 0;
+        WasmBallisticsFinalization.unregister(this);
+        return ptr;
+    }
+    free() {
+        const ptr = this.__destroy_into_raw();
+        wasm.__wbg_wasmballistics_free(ptr, 0);
+    }
+    /**
+     * Unload any custom drag table previously installed via [`Self::load_drag_table`],
+     * reverting every subsequent `trajectory`, `zero`, `lead`, and `monte-carlo` run to the
+     * standard G-model + BC drag (the `-b`/`--bc` value with the selected G1/G7 curve).
+     *
+     * The inverse of `loadDragTable`. It lets a single engine instance alternate between a
+     * measured-curve (CDM) solve and a plain G7-BC solve without constructing a second
+     * instance: `load → solve CDM → clear → solve G7`, with the G7 half uncontaminated —
+     * the same load/clear pattern `clearWindSegments` provides for segmented wind.
+     *
+     * Returns `true` if a table was loaded (and is now cleared), `false` if none was loaded
+     * (a harmless no-op). Idempotent.
+     * @returns {boolean}
+     */
+    clearDragTable() {
+        const ret = wasm.wasmballistics_clearDragTable(this.__wbg_ptr);
+        return ret !== 0;
+    }
+    /**
+     * Report whether a BC5D table is currently loaded.
+     * @returns {boolean}
+     */
+    hasBc5dTable() {
+        const ret = wasm.wasmballistics_hasBc5dTable(this.__wbg_ptr);
+        return ret !== 0;
+    }
+    /**
+     * Report whether a custom drag table is currently loaded.
+     * @returns {boolean}
+     */
+    hasDragTable() {
+        const ret = wasm.wasmballistics_hasDragTable(this.__wbg_ptr);
+        return ret !== 0;
+    }
+    /**
+     * Load a BC5D correction table from the raw bytes of a `bc5d_<caliber>.bin`
+     * file. The host (browser `fetch()` or Node `fs`/`fetch`) is responsible
+     * for retrieving the file — WASM has no filesystem or network — and passes
+     * the bytes here.
+     *
+     * Once loaded, any `trajectory` run that includes `--use-bc-segments` will
+     * apply velocity-dependent BC segments synthesized from this table. Load a
+     * table matching the bullet's caliber (e.g. `bc5d_308.bin` for a .308).
+     *
+     * Returns a short human-readable summary of the loaded table. Replaces any
+     * previously loaded table.
+     * @param {Uint8Array} bytes
+     * @returns {string}
+     */
+    loadBc5dTable(bytes) {
+        let deferred3_0;
+        let deferred3_1;
+        try {
+            const ptr0 = passArray8ToWasm0(bytes, wasm.__wbindgen_malloc);
+            const len0 = WASM_VECTOR_LEN;
+            const ret = wasm.wasmballistics_loadBc5dTable(this.__wbg_ptr, ptr0, len0);
+            var ptr2 = ret[0];
+            var len2 = ret[1];
+            if (ret[3]) {
+                ptr2 = 0; len2 = 0;
+                throw takeFromExternrefTable0(ret[2]);
+            }
+            deferred3_0 = ptr2;
+            deferred3_1 = len2;
+            return getStringFromWasm0(ptr2, len2);
+        } finally {
+            wasm.__wbindgen_free(deferred3_0, deferred3_1, 1);
+        }
+    }
+    /**
+     * Load a custom Mach:Cd drag table (MBA-1328) — a measured or manufacturer-published
+     * drag curve (Hornady CDM data, a Lapua/Doppler-radar-derived deck, or your own) — from
+     * the raw bytes of a CSV file. The host (browser `fetch()` or Node `fs`/`fetch`) is
+     * responsible for retrieving the file — WASM has no filesystem or network — and passes
+     * the bytes here, mirroring [`Self::load_bc5d_table`].
+     *
+     * The bytes must be valid UTF-8 CSV text; parsing is delegated to
+     * [`crate::drag::DragTable::from_csv_str`] — the SAME parser native `--drag-table`
+     * uses — so the accepted format is identical: two columns `mach,cd` per line, blank
+     * lines and `#` comments ignored, a single leading textual header row tolerated, Mach
+     * strictly ascending with at least 2 points, Cd finite and > 0.
+     *
+     * Once loaded, EVERY subsequent `trajectory`, `zero`, `lead`, and `monte-carlo` run
+     * applies the table automatically — no `--use-*` gate flag is needed (unlike a loaded
+     * BC5D table, which only takes effect with `--use-bc-segments`). A loaded table is a
+     * full physical substitute for the G-model + BC (see `calculate_drag_coefficient`):
+     * `-b`/`--bc` may still be supplied but is ignored for drag once a table is active
+     * (matching the native `--drag-table` CLI semantics documented in CLI_USAGE.md).
+     *
+     * Returns a short human-readable summary of the loaded table (point count + Mach
+     * range). Replaces any previously loaded table.
+     *
+     * MBA-1409: also accepts `.drg` vendor drag-curve text (the same format the native
+     * `--drag-table` CLI accepts by `.drg` file extension) as a fallback. WASM has no
+     * filesystem and thus no extension to dispatch on, so the bytes are tried as CSV first
+     * (exactly as before this change); only on CSV failure, if the text
+     * [`crate::drag_file::looks_like_drg`], it is retried through
+     * [`crate::drag_file::parse_drg`]. If both fail, the returned error names both formats.
+     * @param {Uint8Array} bytes
+     * @returns {string}
+     */
+    loadDragTable(bytes) {
+        let deferred3_0;
+        let deferred3_1;
+        try {
+            const ptr0 = passArray8ToWasm0(bytes, wasm.__wbindgen_malloc);
+            const len0 = WASM_VECTOR_LEN;
+            const ret = wasm.wasmballistics_loadDragTable(this.__wbg_ptr, ptr0, len0);
+            var ptr2 = ret[0];
+            var len2 = ret[1];
+            if (ret[3]) {
+                ptr2 = 0; len2 = 0;
+                throw takeFromExternrefTable0(ret[2]);
+            }
+            deferred3_0 = ptr2;
+            deferred3_1 = len2;
+            return getStringFromWasm0(ptr2, len2);
+        } finally {
+            wasm.__wbindgen_free(deferred3_0, deferred3_1, 1);
+        }
+    }
+    constructor() {
+        const ret = wasm.wasmballistics_new();
+        this.__wbg_ptr = ret;
+        WasmBallisticsFinalization.register(this, this.__wbg_ptr, this);
+        return this;
+    }
+    /**
+     * Run a command and return the output
+     * @param {string} command
+     * @returns {string}
+     */
+    runCommand(command) {
+        let deferred3_0;
+        let deferred3_1;
+        try {
+            const ptr0 = passStringToWasm0(command, wasm.__wbindgen_malloc, wasm.__wbindgen_realloc);
+            const len0 = WASM_VECTOR_LEN;
+            const ret = wasm.wasmballistics_runCommand(this.__wbg_ptr, ptr0, len0);
+            var ptr2 = ret[0];
+            var len2 = ret[1];
+            if (ret[3]) {
+                ptr2 = 0; len2 = 0;
+                throw takeFromExternrefTable0(ret[2]);
+            }
+            deferred3_0 = ptr2;
+            deferred3_1 = len2;
+            return getStringFromWasm0(ptr2, len2);
+        } finally {
+            wasm.__wbindgen_free(deferred3_0, deferred3_1, 1);
+        }
+    }
+}
+if (Symbol.dispose) WasmBallistics.prototype[Symbol.dispose] = WasmBallistics.prototype.free;
+
+/**
+ * The engine's versioned JSON command bridge, as one JavaScript function.
+ *
+ * One request envelope in, one response envelope out, both as strings:
+ *
+ * ```text
+ * in:   {"api_version":1,"command":"solve","request":{ … }}
+ * ok:   {"ok":true,"api_version":1,"engine_version":"…","command":"solve","result":{ … }}
+ * err:  {"ok":false,"api_version":1,"engine_version":"…","error":{"code":"…","message":"…"}}
+ * ```
+ *
+ * This is the module's programmatic surface, deliberately separate from the
+ * browser terminal above. The terminal's commands are per-feature gated because a
+ * stripped build is a smaller download; the bridge is not gateable that way — it
+ * is a single entry point onto every command the build actually contains, and it
+ * costs nothing but serde, which is already a core dependency.
+ *
+ * It is the ONLY route from JavaScript to `corrections.bc5d_table_path` and
+ * `atmosphere.pressure_reference`, and the only one that validates
+ * `effects.wind_shear_model` against a typed enum rather than silently resolving
+ * an unrecognised name to the power law.
+ *
+ * Failures arrive INSIDE the returned JSON — this never throws. Ask
+ * `meta.capabilities` for the command list, which depends on what this build
+ * compiled in rather than on what the bridge knows how to dispatch.
+ * @param {string} request_json
+ * @returns {string}
+ */
+export function bridgeCall(request_json) {
+    let deferred2_0;
+    let deferred2_1;
+    try {
+        const ptr0 = passStringToWasm0(request_json, wasm.__wbindgen_malloc, wasm.__wbindgen_realloc);
+        const len0 = WASM_VECTOR_LEN;
+        const ret = wasm.bridgeCall(ptr0, len0);
+        deferred2_0 = ret[0];
+        deferred2_1 = ret[1];
+        return getStringFromWasm0(ret[0], ret[1]);
+    } finally {
+        wasm.__wbindgen_free(deferred2_0, deferred2_1, 1);
+    }
+}
+function __wbg_get_imports() {
+    const import0 = {
+        __proto__: null,
+        __wbg___wbindgen_throw_344f42d3211c4765: function(arg0, arg1) {
+            throw new Error(getStringFromWasm0(arg0, arg1));
+        },
+        __wbg_getRandomValues_cc7f052a444bb2ce: function() { return handleError(function (arg0, arg1) {
+            globalThis.crypto.getRandomValues(getArrayU8FromWasm0(arg0, arg1));
+        }, arguments); },
+        __wbg_new_32b398fb48b6d94a: function() {
+            const ret = new Array();
+            return ret;
+        },
+        __wbg_new_da52cf8fe3429cb2: function() {
+            const ret = new Object();
+            return ret;
+        },
+        __wbg_push_d2ae3af0c1217ae6: function(arg0, arg1) {
+            const ret = arg0.push(arg1);
+            return ret;
+        },
+        __wbg_set_8535240470bf2500: function() { return handleError(function (arg0, arg1, arg2) {
+            const ret = Reflect.set(arg0, arg1, arg2);
+            return ret;
+        }, arguments); },
+        __wbindgen_cast_0000000000000001: function(arg0) {
+            // Cast intrinsic for `F64 -> Externref`.
+            const ret = arg0;
+            return ret;
+        },
+        __wbindgen_cast_0000000000000002: function(arg0, arg1) {
+            // Cast intrinsic for `Ref(String) -> Externref`.
+            const ret = getStringFromWasm0(arg0, arg1);
+            return ret;
+        },
+        __wbindgen_init_externref_table: function() {
+            const table = wasm.__wbindgen_externrefs;
+            const offset = table.grow(4);
+            table.set(0, undefined);
+            table.set(offset + 0, undefined);
+            table.set(offset + 1, null);
+            table.set(offset + 2, true);
+            table.set(offset + 3, false);
+        },
+    };
+    return {
+        __proto__: null,
+        "./ballistics_engine_bg.js": import0,
+    };
+}
+
+const CalculatorFinalization = (typeof FinalizationRegistry === 'undefined')
+    ? { register: () => {}, unregister: () => {} }
+    : new FinalizationRegistry(ptr => wasm.__wbg_calculator_free(ptr, 1));
+const WasmBallisticsFinalization = (typeof FinalizationRegistry === 'undefined')
+    ? { register: () => {}, unregister: () => {} }
+    : new FinalizationRegistry(ptr => wasm.__wbg_wasmballistics_free(ptr, 1));
+
+function addToExternrefTable0(obj) {
+    const idx = wasm.__externref_table_alloc();
+    wasm.__wbindgen_externrefs.set(idx, obj);
+    return idx;
+}
+
+function getArrayU8FromWasm0(ptr, len) {
+    ptr = ptr >>> 0;
+    return getUint8ArrayMemory0().subarray(ptr / 1, ptr / 1 + len);
+}
+
+function getStringFromWasm0(ptr, len) {
+    return decodeText(ptr >>> 0, len);
+}
+
+let cachedUint8ArrayMemory0 = null;
+function getUint8ArrayMemory0() {
+    if (cachedUint8ArrayMemory0 === null || cachedUint8ArrayMemory0.byteLength === 0) {
+        cachedUint8ArrayMemory0 = new Uint8Array(wasm.memory.buffer);
+    }
+    return cachedUint8ArrayMemory0;
+}
+
+function handleError(f, args) {
+    try {
+        return f.apply(this, args);
+    } catch (e) {
+        const idx = addToExternrefTable0(e);
+        wasm.__wbindgen_exn_store(idx);
+    }
+}
+
+function isLikeNone(x) {
+    return x === undefined || x === null;
+}
+
+function passArray8ToWasm0(arg, malloc) {
+    const ptr = malloc(arg.length * 1, 1) >>> 0;
+    getUint8ArrayMemory0().set(arg, ptr / 1);
+    WASM_VECTOR_LEN = arg.length;
+    return ptr;
+}
+
+function passStringToWasm0(arg, malloc, realloc) {
+    if (realloc === undefined) {
+        const buf = cachedTextEncoder.encode(arg);
+        const ptr = malloc(buf.length, 1) >>> 0;
+        getUint8ArrayMemory0().subarray(ptr, ptr + buf.length).set(buf);
+        WASM_VECTOR_LEN = buf.length;
+        return ptr;
+    }
+
+    let len = arg.length;
+    let ptr = malloc(len, 1) >>> 0;
+
+    const mem = getUint8ArrayMemory0();
+
+    let offset = 0;
+
+    for (; offset < len; offset++) {
+        const code = arg.charCodeAt(offset);
+        if (code > 0x7F) break;
+        mem[ptr + offset] = code;
+    }
+    if (offset !== len) {
+        if (offset !== 0) {
+            arg = arg.slice(offset);
+        }
+        ptr = realloc(ptr, len, len = offset + arg.length * 3, 1) >>> 0;
+        const view = getUint8ArrayMemory0().subarray(ptr + offset, ptr + len);
+        const ret = cachedTextEncoder.encodeInto(arg, view);
+
+        offset += ret.written;
+        ptr = realloc(ptr, len, offset, 1) >>> 0;
+    }
+
+    WASM_VECTOR_LEN = offset;
+    return ptr;
+}
+
+function takeFromExternrefTable0(idx) {
+    const value = wasm.__wbindgen_externrefs.get(idx);
+    wasm.__externref_table_dealloc(idx);
+    return value;
+}
+
+let cachedTextDecoder = new TextDecoder('utf-8', { ignoreBOM: true, fatal: true });
+cachedTextDecoder.decode();
+const MAX_SAFARI_DECODE_BYTES = 2146435072;
+let numBytesDecoded = 0;
+function decodeText(ptr, len) {
+    numBytesDecoded += len;
+    if (numBytesDecoded >= MAX_SAFARI_DECODE_BYTES) {
+        cachedTextDecoder = new TextDecoder('utf-8', { ignoreBOM: true, fatal: true });
+        cachedTextDecoder.decode();
+        numBytesDecoded = len;
+    }
+    return cachedTextDecoder.decode(getUint8ArrayMemory0().subarray(ptr, ptr + len));
+}
+
+const cachedTextEncoder = new TextEncoder();
+
+if (!('encodeInto' in cachedTextEncoder)) {
+    cachedTextEncoder.encodeInto = function (arg, view) {
+        const buf = cachedTextEncoder.encode(arg);
+        view.set(buf);
+        return {
+            read: arg.length,
+            written: buf.length
+        };
+    };
+}
+
+let WASM_VECTOR_LEN = 0;
+
+let wasmModule, wasmInstance, wasm;
+function __wbg_finalize_init(instance, module) {
+    wasmInstance = instance;
+    wasm = instance.exports;
+    wasmModule = module;
+    cachedUint8ArrayMemory0 = null;
+    wasm.__wbindgen_start();
+    return wasm;
+}
+
+async function __wbg_load(module, imports) {
+    if (typeof Response === 'function' && module instanceof Response) {
+        if (typeof WebAssembly.instantiateStreaming === 'function') {
+            try {
+                return await WebAssembly.instantiateStreaming(module, imports);
+            } catch (e) {
+                const validResponse = module.ok && expectedResponseType(module.type);
+
+                if (validResponse && module.headers.get('Content-Type') !== 'application/wasm') {
+                    console.warn("`WebAssembly.instantiateStreaming` failed because your server does not serve Wasm with `application/wasm` MIME type. Falling back to `WebAssembly.instantiate` which is slower. Original error:\n", e);
+
+                } else { throw e; }
+            }
+        }
+
+        const bytes = await module.arrayBuffer();
+        return await WebAssembly.instantiate(bytes, imports);
+    } else {
+        const instance = await WebAssembly.instantiate(module, imports);
+
+        if (instance instanceof WebAssembly.Instance) {
+            return { instance, module };
+        } else {
+            return instance;
+        }
+    }
+
+    function expectedResponseType(type) {
+        switch (type) {
+            case 'basic': case 'cors': case 'default': return true;
+        }
+        return false;
+    }
+}
+
+function initSync(module) {
+    if (wasm !== undefined) return wasm;
+
+
+    if (module !== undefined) {
+        if (Object.getPrototypeOf(module) === Object.prototype) {
+            ({module} = module)
+        } else {
+            console.warn('using deprecated parameters for `initSync()`; pass a single object instead')
+        }
+    }
+
+    const imports = __wbg_get_imports();
+    if (!(module instanceof WebAssembly.Module)) {
+        module = new WebAssembly.Module(module);
+    }
+    const instance = new WebAssembly.Instance(module, imports);
+    return __wbg_finalize_init(instance, module);
+}
+
+async function __wbg_init(module_or_path) {
+    if (wasm !== undefined) return wasm;
+
+
+    if (module_or_path !== undefined) {
+        if (Object.getPrototypeOf(module_or_path) === Object.prototype) {
+            ({module_or_path} = module_or_path)
+        } else {
+            console.warn('using deprecated parameters for the initialization function; pass a single object instead')
+        }
+    }
+
+    if (module_or_path === undefined) {
+        module_or_path = new URL('ballistics_engine_bg.wasm', import.meta.url);
+    }
+    const imports = __wbg_get_imports();
+
+    if (typeof module_or_path === 'string' || (typeof Request === 'function' && module_or_path instanceof Request) || (typeof URL === 'function' && module_or_path instanceof URL)) {
+        module_or_path = fetch(module_or_path);
+    }
+
+    const { instance, module } = await __wbg_load(await module_or_path, imports);
+
+    return __wbg_finalize_init(instance, module);
+}
+
+export { initSync, __wbg_init as default };