aws-sdk 2.995.0 → 2.999.0

package/clients/elbv2.d.ts

@@ -690,7 +690,7 @@ declare namespace ELBv2 {
      */
     HealthCheckPort?: HealthCheckPort;
     /**
-     * Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance or ip, health checks are always enabled and cannot be disabled.
+     * Indicates whether health checks are enabled. If the target type is lambda, health checks are disabled by default but can be enabled. If the target type is instance, ip, or alb, health checks are always enabled and cannot be disabled.
      */
     HealthCheckEnabled?: HealthCheckEnabled;
     /**
@@ -718,7 +718,7 @@ declare namespace ELBv2 {
      */
     Matcher?: Matcher;
     /**
-     * The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.    instance - Register targets by instance ID. This is the default value.    ip - Register targets by IP address. You can specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.    lambda - Register a single Lambda function as a target.  
+     * The type of target that you must specify when registering targets with this target group. You can't specify targets for a target group using more than one target type.    instance - Register targets by instance ID. This is the default value.    ip - Register targets by IP address. You can specify IP addresses from the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You can't specify publicly routable IP addresses.    lambda - Register a single Lambda function as a target.    alb - Register a single Application Load Balancer as a target.  
      */
     TargetType?: TargetTypeEnum;
     /**
@@ -1702,15 +1702,15 @@ declare namespace ELBv2 {
   export type TagValue = string;
   export interface TargetDescription {
     /**
-     * The ID of the target. If the target type of the target group is instance, specify an instance ID. If the target type is ip, specify an IP address. If the target type is lambda, specify the ARN of the Lambda function.
+     * The ID of the target. If the target type of the target group is instance, specify an instance ID. If the target type is ip, specify an IP address. If the target type is lambda, specify the ARN of the Lambda function. If the target type is alb, specify the ARN of the Application Load Balancer target. 
      */
     Id: TargetId;
     /**
-     * The port on which the target is listening. If the target group protocol is GENEVE, the supported port is 6081. Not used if the target is a Lambda function.
+     * The port on which the target is listening. If the target group protocol is GENEVE, the supported port is 6081. If the target type is alb, the targeted Application Load Balancer must have at least one listener whose port matches the target group port. Not used if the target is a Lambda function.
      */
     Port?: Port;
     /**
-     * An Availability Zone or all. This determines whether the target receives traffic from the load balancer nodes in the specified Availability Zone or from all enabled Availability Zones for the load balancer. This parameter is not supported if the target type of the target group is instance. If the target type is ip and the IP address is in a subnet of the VPC for the target group, the Availability Zone is automatically detected and this parameter is optional. If the IP address is outside the VPC, this parameter is required. With an Application Load Balancer, if the target type is ip and the IP address is outside the VPC for the target group, the only supported value is all. If the target type is lambda, this parameter is optional and the only supported value is all.
+     * An Availability Zone or all. This determines whether the target receives traffic from the load balancer nodes in the specified Availability Zone or from all enabled Availability Zones for the load balancer. This parameter is not supported if the target type of the target group is instance or alb. If the target type is ip and the IP address is in a subnet of the VPC for the target group, the Availability Zone is automatically detected and this parameter is optional. If the IP address is outside the VPC, this parameter is required. With an Application Load Balancer, if the target type is ip and the IP address is outside the VPC for the target group, the only supported value is all. If the target type is lambda, this parameter is optional and the only supported value is all.
      */
     AvailabilityZone?: ZoneName;
   }
@@ -1777,7 +1777,7 @@ declare namespace ELBv2 {
      */
     LoadBalancerArns?: LoadBalancerArns;
     /**
-     * The type of target that you must specify when registering targets with this target group. The possible values are instance (register targets by instance ID), ip (register targets by IP address), or lambda (register a single Lambda function as a target).
+     * The type of target that you must specify when registering targets with this target group. The possible values are instance (register targets by instance ID), ip (register targets by IP address), lambda (register a single Lambda function as a target), or alb (register a single Application Load Balancer as a target).
      */
     TargetType?: TargetTypeEnum;
     /**
@@ -1859,7 +1859,7 @@ declare namespace ELBv2 {
   export type TargetHealthReasonEnum = "Elb.RegistrationInProgress"|"Elb.InitialHealthChecking"|"Target.ResponseCodeMismatch"|"Target.Timeout"|"Target.FailedHealthChecks"|"Target.NotRegistered"|"Target.NotInUse"|"Target.DeregistrationInProgress"|"Target.InvalidState"|"Target.IpUnusable"|"Target.HealthCheckDisabled"|"Elb.InternalError"|string;
   export type TargetHealthStateEnum = "initial"|"healthy"|"unhealthy"|"unused"|"draining"|"unavailable"|string;
   export type TargetId = string;
-  export type TargetTypeEnum = "instance"|"ip"|"lambda"|string;
+  export type TargetTypeEnum = "instance"|"ip"|"lambda"|"alb"|string;
   export type VpcId = string;
   export type ZoneName = string;
   /**

package/clients/imagebuilder.d.ts

@@ -228,19 +228,19 @@ declare class Imagebuilder extends Service {
    */
   importComponent(callback?: (err: AWSError, data: Imagebuilder.Types.ImportComponentResponse) => void): Request<Imagebuilder.Types.ImportComponentResponse, AWSError>;
   /**
-   *  Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+   *  Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
    */
   listComponentBuildVersions(params: Imagebuilder.Types.ListComponentBuildVersionsRequest, callback?: (err: AWSError, data: Imagebuilder.Types.ListComponentBuildVersionsResponse) => void): Request<Imagebuilder.Types.ListComponentBuildVersionsResponse, AWSError>;
   /**
-   *  Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+   *  Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
    */
   listComponentBuildVersions(callback?: (err: AWSError, data: Imagebuilder.Types.ListComponentBuildVersionsResponse) => void): Request<Imagebuilder.Types.ListComponentBuildVersionsResponse, AWSError>;
   /**
-   * Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+   * Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
    */
   listComponents(params: Imagebuilder.Types.ListComponentsRequest, callback?: (err: AWSError, data: Imagebuilder.Types.ListComponentsResponse) => void): Request<Imagebuilder.Types.ListComponentsResponse, AWSError>;
   /**
-   * Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+   * Returns the list of component build versions for the specified semantic version.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
    */
   listComponents(callback?: (err: AWSError, data: Imagebuilder.Types.ListComponentsResponse) => void): Request<Imagebuilder.Types.ListComponentsResponse, AWSError>;
   /**
@@ -413,7 +413,7 @@ declare namespace Imagebuilder {
      */
     systemsManagerAgent?: SystemsManagerAgent;
     /**
-     * Use this property to provide commands or a command script to run when you launch your build instance.  The userDataOverride property replaces any commands that Image Builder might have added to ensure that Systems Manager is installed on your Linux build instance. If you override the user data, make sure that you add commands to install Systems Manager, if it is not pre-installed on your source image. 
+     * Use this property to provide commands or a command script to run when you launch your build instance.  The userDataOverride property replaces any commands that Image Builder might have added to ensure that Systems Manager is installed on your Linux build instance. If you override the user data, make sure that you add commands to install Systems Manager, if it is not pre-installed on your base image. 
      */
     userDataOverride?: UserDataOverride;
   }
@@ -442,7 +442,7 @@ declare namespace Imagebuilder {
   }
   export interface AmiDistributionConfiguration {
     /**
-     * The name of the distribution configuration.
+     * The name of the output AMI.
      */
     name?: AmiNameString;
     /**
@@ -525,7 +525,7 @@ declare namespace Imagebuilder {
      */
     platform?: Platform;
     /**
-     * The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the parent image OS version during image recipe creation.
+     * The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.
      */
     supportedOsVersions?: OsVersionList;
     /**
@@ -639,7 +639,7 @@ declare namespace Imagebuilder {
      */
     platform?: Platform;
     /**
-     * The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the parent image OS version during image recipe creation.
+     * The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.
      */
     supportedOsVersions?: OsVersionList;
     /**
@@ -683,7 +683,7 @@ declare namespace Imagebuilder {
      */
     name?: ResourceName;
     /**
-     * The semantic version of the component.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+     * The semantic version of the component.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
      */
     version?: VersionNumber;
     /**
@@ -695,7 +695,7 @@ declare namespace Imagebuilder {
      */
     platform?: Platform;
     /**
-     * he operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the parent image OS version during image recipe creation.
+     * he operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.
      */
     supportedOsVersions?: OsVersionList;
     /**
@@ -765,7 +765,7 @@ declare namespace Imagebuilder {
      */
     owner?: NonEmptyString;
     /**
-     * The semantic version of the container recipe.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+     * The semantic version of the container recipe.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
      */
     version?: VersionNumber;
     /**
@@ -789,7 +789,7 @@ declare namespace Imagebuilder {
      */
     encrypted?: NullableBoolean;
     /**
-     * The source image for the container recipe.
+     * The base image for the container recipe.
      */
     parentImage?: NonEmptyString;
     /**
@@ -832,7 +832,7 @@ declare namespace Imagebuilder {
      */
     owner?: NonEmptyString;
     /**
-     * The source image for the container recipe.
+     * The base image for the container recipe.
      */
     parentImage?: NonEmptyString;
     /**
@@ -869,7 +869,7 @@ declare namespace Imagebuilder {
      */
     platform: Platform;
     /**
-     *  The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the parent image OS version during image recipe creation.
+     *  The operating system (OS) version supported by the component. If the OS information is available, a prefix match is performed against the base image OS version during image recipe creation.
      */
     supportedOsVersions?: OsVersionList;
     /**
@@ -941,15 +941,15 @@ declare namespace Imagebuilder {
      */
     dockerfileTemplateUri?: Uri;
     /**
-     * Specifies the operating system platform when you use a custom source image.
+     * Specifies the operating system platform when you use a custom base image.
      */
     platformOverride?: Platform;
     /**
-     * Specifies the operating system version for the source image.
+     * Specifies the operating system version for the base image.
      */
     imageOsVersionOverride?: NonEmptyString;
     /**
-     * The source image for the container recipe.
+     * The base image for the container recipe.
      */
     parentImage: NonEmptyString;
     /**
@@ -1105,7 +1105,7 @@ declare namespace Imagebuilder {
      */
     components: ComponentConfigurationList;
     /**
-     * The parent image of the image recipe. The value of the string can be the ARN of the parent image or an AMI ID. The format for the ARN follows this example: arn:aws:imagebuilder:us-west-2:aws:image/windows-server-2016-english-full-base-x86/x.x.x. You can provide the specific version that you want to use, or you can use a wildcard in all of the fields. If you enter an AMI ID for the string value, you must have access to the AMI, and the AMI must be in the same Region in which you are using Image Builder.
+     * The base image of the image recipe. The value of the string can be the ARN of the base image or an AMI ID. The format for the ARN follows this example: arn:aws:imagebuilder:us-west-2:aws:image/windows-server-2016-english-full-base-x86/x.x.x. You can provide the specific version that you want to use, or you can use a wildcard in all of the fields. If you enter an AMI ID for the string value, you must have access to the AMI, and the AMI must be in the same Region in which you are using Image Builder.
      */
     parentImage: NonEmptyString;
     /**
@@ -1201,7 +1201,7 @@ declare namespace Imagebuilder {
      */
     description?: NonEmptyString;
     /**
-     * The instance metadata options that you can set for the HTTP requests that pipeline builds use to launch EC2 build and test instances. For more information about instance metadata options, see one of the following links:    Configure the instance metadata options in the  Amazon EC2 User Guide  for Linux instances.    Configure the instance metadata options in the  Amazon EC2 Windows Guide  for Windows instances.  
+     * The instance types of the infrastructure configuration. You can specify one or more instance types to use for this build. The service will pick one of these instance types based on availability.
      */
     instanceTypes?: InstanceTypeList;
     /**
@@ -1712,7 +1712,7 @@ declare namespace Imagebuilder {
      */
     name?: ResourceName;
     /**
-     * The semantic version of the image.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+     * The semantic version of the image.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
      */
     version?: VersionNumber;
     /**
@@ -1891,7 +1891,7 @@ declare namespace Imagebuilder {
      */
     components?: ComponentConfigurationList;
     /**
-     * The parent image of the image recipe.
+     * The base image of the image recipe.
      */
     parentImage?: NonEmptyString;
     /**
@@ -1934,7 +1934,7 @@ declare namespace Imagebuilder {
      */
     owner?: NonEmptyString;
     /**
-     * The parent image of the image recipe.
+     * The base image of the image recipe.
      */
     parentImage?: NonEmptyString;
     /**
@@ -2031,7 +2031,7 @@ declare namespace Imagebuilder {
      */
     type?: ImageType;
     /**
-     * Details for a specific version of an Image Builder image. This version follows the semantic version syntax.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+     * Details for a specific version of an Image Builder image. This version follows the semantic version syntax.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Assignment: For the first three nodes you can assign any positive integer value, including zero, with an upper limit of 2^30-1, or 1073741823 for each node. Image Builder automatically assigns the build number to the fourth node.  Patterns: You can use any numeric pattern that adheres to the assignment requirements for the nodes that you can assign. For example, you might choose a software version pattern, such as 1.0.0, or a date, such as 2021.01.01.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
      */
     version?: VersionNumber;
     /**
@@ -2060,7 +2060,7 @@ declare namespace Imagebuilder {
      */
     name: ResourceName;
     /**
-     * The semantic version of the component. This version follows the semantic version syntax.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+     * The semantic version of the component. This version follows the semantic version syntax.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
      */
     semanticVersion: VersionNumber;
     /**
@@ -2240,7 +2240,7 @@ declare namespace Imagebuilder {
      */
     virtualName?: NonEmptyString;
     /**
-     * Use to remove a mapping from the parent image.
+     * Use to remove a mapping from the base image.
      */
     noDevice?: EmptyString;
   }
@@ -2604,7 +2604,7 @@ declare namespace Imagebuilder {
      */
     requestId?: NonEmptyString;
     /**
-     * The list of image semantic versions.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the source image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
+     * The list of image semantic versions.  The semantic version has four nodes: &lt;major&gt;.&lt;minor&gt;.&lt;patch&gt;/&lt;build&gt;. You can assign values for the first three, and can filter on all of them.  Filtering: With semantic versioning, you have the flexibility to use wildcards (x) to specify the most recent versions or nodes when selecting the base image or components for your recipe. When you use a wildcard in any node, all nodes to the right of the first wildcard must also be wildcards. 
      */
     imageVersionList?: ImageVersionList;
     /**
@@ -2782,7 +2782,7 @@ declare namespace Imagebuilder {
      */
     timezone?: Timezone;
     /**
-     * The condition configures when the pipeline should trigger a new image build. When the pipelineExecutionStartCondition is set to EXPRESSION_MATCH_AND_DEPENDENCY_UPDATES_AVAILABLE, and you use semantic version filters on the source image or components in your image recipe, EC2 Image Builder will build a new image only when there are new versions of the image or components in your recipe that match the semantic version filter. When it is set to EXPRESSION_MATCH_ONLY, it will build a new image every time the CRON expression matches the current time. For semantic version syntax, see CreateComponent in the  EC2 Image Builder API Reference.
+     * The condition configures when the pipeline should trigger a new image build. When the pipelineExecutionStartCondition is set to EXPRESSION_MATCH_AND_DEPENDENCY_UPDATES_AVAILABLE, and you use semantic version filters on the base image or components in your image recipe, EC2 Image Builder will build a new image only when there are new versions of the image or components in your recipe that match the semantic version filter. When it is set to EXPRESSION_MATCH_ONLY, it will build a new image every time the CRON expression matches the current time. For semantic version syntax, see CreateComponent in the  EC2 Image Builder API Reference.
      */
     pipelineExecutionStartCondition?: PipelineExecutionStartCondition;
   }

package/clients/lambda.d.ts

@@ -22,11 +22,11 @@ declare class Lambda extends Service {
    */
   addLayerVersionPermission(callback?: (err: AWSError, data: Lambda.Types.AddLayerVersionPermissionResponse) => void): Request<Lambda.Types.AddLayerVersionPermissionResponse, AWSError>;
   /**
-   * Grants an Amazon Web Services service or another account permission to use a function. You can apply the policy at the function level, or specify a qualifier to restrict access to a single version or alias. If you use a qualifier, the invoker must use the full Amazon Resource Name (ARN) of that version or alias to invoke the function. To grant permission to another account, specify the account ID as the Principal. For Amazon Web Services services, the principal is a domain-style identifier defined by the service, like s3.amazonaws.com or sns.amazonaws.com. For Amazon Web Services services, you can also specify the ARN of the associated resource as the SourceArn. If you grant permission to a service principal without specifying the source, other accounts could potentially configure resources in their account to invoke your Lambda function. This action adds a statement to a resource-based permissions policy for the function. For more information about function policies, see Lambda Function Policies. 
+   * Grants an Amazon Web Services service or another account permission to use a function. You can apply the policy at the function level, or specify a qualifier to restrict access to a single version or alias. If you use a qualifier, the invoker must use the full Amazon Resource Name (ARN) of that version or alias to invoke the function. Note: Lambda does not support adding policies to version $LATEST. To grant permission to another account, specify the account ID as the Principal. For Amazon Web Services services, the principal is a domain-style identifier defined by the service, like s3.amazonaws.com or sns.amazonaws.com. For Amazon Web Services services, you can also specify the ARN of the associated resource as the SourceArn. If you grant permission to a service principal without specifying the source, other accounts could potentially configure resources in their account to invoke your Lambda function. This action adds a statement to a resource-based permissions policy for the function. For more information about function policies, see Lambda Function Policies. 
    */
   addPermission(params: Lambda.Types.AddPermissionRequest, callback?: (err: AWSError, data: Lambda.Types.AddPermissionResponse) => void): Request<Lambda.Types.AddPermissionResponse, AWSError>;
   /**
-   * Grants an Amazon Web Services service or another account permission to use a function. You can apply the policy at the function level, or specify a qualifier to restrict access to a single version or alias. If you use a qualifier, the invoker must use the full Amazon Resource Name (ARN) of that version or alias to invoke the function. To grant permission to another account, specify the account ID as the Principal. For Amazon Web Services services, the principal is a domain-style identifier defined by the service, like s3.amazonaws.com or sns.amazonaws.com. For Amazon Web Services services, you can also specify the ARN of the associated resource as the SourceArn. If you grant permission to a service principal without specifying the source, other accounts could potentially configure resources in their account to invoke your Lambda function. This action adds a statement to a resource-based permissions policy for the function. For more information about function policies, see Lambda Function Policies. 
+   * Grants an Amazon Web Services service or another account permission to use a function. You can apply the policy at the function level, or specify a qualifier to restrict access to a single version or alias. If you use a qualifier, the invoker must use the full Amazon Resource Name (ARN) of that version or alias to invoke the function. Note: Lambda does not support adding policies to version $LATEST. To grant permission to another account, specify the account ID as the Principal. For Amazon Web Services services, the principal is a domain-style identifier defined by the service, like s3.amazonaws.com or sns.amazonaws.com. For Amazon Web Services services, you can also specify the ARN of the associated resource as the SourceArn. If you grant permission to a service principal without specifying the source, other accounts could potentially configure resources in their account to invoke your Lambda function. This action adds a statement to a resource-based permissions policy for the function. For more information about function policies, see Lambda Function Policies. 
    */
   addPermission(callback?: (err: AWSError, data: Lambda.Types.AddPermissionResponse) => void): Request<Lambda.Types.AddPermissionResponse, AWSError>;
   /**
@@ -46,19 +46,19 @@ declare class Lambda extends Service {
    */
   createCodeSigningConfig(callback?: (err: AWSError, data: Lambda.Types.CreateCodeSigningConfigResponse) => void): Request<Lambda.Types.CreateCodeSigningConfigResponse, AWSError>;
   /**
-   * Creates a mapping between an event source and an Lambda function. Lambda reads items from the event source and triggers the function. For details about each event source type, see the following topics. In particular, each of the topics describes the required and optional parameters for the specific event source.      Configuring a Dynamo DB stream as an event source      Configuring a Kinesis stream as an event source      Configuring an SQS queue as an event source      Configuring an MQ broker as an event source      Configuring MSK as an event source      Configuring Self-Managed Apache Kafka as an event source    The following error handling options are only available for stream sources (DynamoDB and Kinesis):    BisectBatchOnFunctionError - If the function returns an error, split the batch in two and retry.    DestinationConfig - Send discarded records to an Amazon SQS queue or Amazon SNS topic.    MaximumRecordAgeInSeconds - Discard records older than the specified age. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires    MaximumRetryAttempts - Discard records after the specified number of retries. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires.    ParallelizationFactor - Process multiple batches from each shard concurrently.  
+   * Creates a mapping between an event source and an Lambda function. Lambda reads items from the event source and triggers the function. For details about each event source type, see the following topics.      Configuring a Dynamo DB stream as an event source      Configuring a Kinesis stream as an event source      Configuring an Amazon SQS queue as an event source      Configuring an MQ broker as an event source      Configuring MSK as an event source      Configuring Self-Managed Apache Kafka as an event source    The following error handling options are only available for stream sources (DynamoDB and Kinesis):    BisectBatchOnFunctionError - If the function returns an error, split the batch in two and retry.    DestinationConfig - Send discarded records to an Amazon SQS queue or Amazon SNS topic.    MaximumRecordAgeInSeconds - Discard records older than the specified age. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires    MaximumRetryAttempts - Discard records after the specified number of retries. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires.    ParallelizationFactor - Process multiple batches from each shard concurrently.  
    */
   createEventSourceMapping(params: Lambda.Types.CreateEventSourceMappingRequest, callback?: (err: AWSError, data: Lambda.Types.EventSourceMappingConfiguration) => void): Request<Lambda.Types.EventSourceMappingConfiguration, AWSError>;
   /**
-   * Creates a mapping between an event source and an Lambda function. Lambda reads items from the event source and triggers the function. For details about each event source type, see the following topics. In particular, each of the topics describes the required and optional parameters for the specific event source.      Configuring a Dynamo DB stream as an event source      Configuring a Kinesis stream as an event source      Configuring an SQS queue as an event source      Configuring an MQ broker as an event source      Configuring MSK as an event source      Configuring Self-Managed Apache Kafka as an event source    The following error handling options are only available for stream sources (DynamoDB and Kinesis):    BisectBatchOnFunctionError - If the function returns an error, split the batch in two and retry.    DestinationConfig - Send discarded records to an Amazon SQS queue or Amazon SNS topic.    MaximumRecordAgeInSeconds - Discard records older than the specified age. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires    MaximumRetryAttempts - Discard records after the specified number of retries. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires.    ParallelizationFactor - Process multiple batches from each shard concurrently.  
+   * Creates a mapping between an event source and an Lambda function. Lambda reads items from the event source and triggers the function. For details about each event source type, see the following topics.      Configuring a Dynamo DB stream as an event source      Configuring a Kinesis stream as an event source      Configuring an Amazon SQS queue as an event source      Configuring an MQ broker as an event source      Configuring MSK as an event source      Configuring Self-Managed Apache Kafka as an event source    The following error handling options are only available for stream sources (DynamoDB and Kinesis):    BisectBatchOnFunctionError - If the function returns an error, split the batch in two and retry.    DestinationConfig - Send discarded records to an Amazon SQS queue or Amazon SNS topic.    MaximumRecordAgeInSeconds - Discard records older than the specified age. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires    MaximumRetryAttempts - Discard records after the specified number of retries. The default value is infinite (-1). When set to infinite (-1), failed records are retried until the record expires.    ParallelizationFactor - Process multiple batches from each shard concurrently.  
    */
   createEventSourceMapping(callback?: (err: AWSError, data: Lambda.Types.EventSourceMappingConfiguration) => void): Request<Lambda.Types.EventSourceMappingConfiguration, AWSError>;
   /**
-   * Creates a Lambda function. To create a function, you need a deployment package and an execution role. The deployment package is a .zip file archive or container image that contains your function code. The execution role grants the function permission to use Amazon Web Services services, such as Amazon CloudWatch Logs for log streaming and X-Ray for request tracing. You set the package type to Image if the deployment package is a container image. For a container image, the code property must include the URI of a container image in the Amazon ECR registry. You do not need to specify the handler and runtime properties.  You set the package type to Zip if the deployment package is a .zip file archive. For a .zip file archive, the code property specifies the location of the .zip file. You must also specify the handler and runtime properties. When you create a function, Lambda provisions an instance of the function and its supporting resources. If your function connects to a VPC, this process can take a minute or so. During this time, you can't invoke or modify the function. The State, StateReason, and StateReasonCode fields in the response from GetFunctionConfiguration indicate when the function is ready to invoke. For more information, see Function States. A function has an unpublished version, and can have published versions and aliases. The unpublished version changes when you update your function's code and configuration. A published version is a snapshot of your function code and configuration that can't be changed. An alias is a named resource that maps to a version, and can be changed to map to a different version. Use the Publish parameter to create version 1 of your function from its initial configuration. The other parameters let you configure version-specific and function-level settings. You can modify version-specific settings later with UpdateFunctionConfiguration. Function-level settings apply to both the unpublished and published versions of the function, and include tags (TagResource) and per-function concurrency limits (PutFunctionConcurrency). You can use code signing if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with UpdateFunctionCode, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes set set of signing profiles, which define the trusted publishers for this function. If another account or an Amazon Web Services service invokes your function, use AddPermission to grant permission by creating a resource-based IAM policy. You can grant permissions at the function level, on a version, or on an alias. To invoke your function directly, use Invoke. To invoke your function in response to events in other Amazon Web Services services, create an event source mapping (CreateEventSourceMapping), or configure a function trigger in the other service. For more information, see Invoking Functions.
+   * Creates a Lambda function. To create a function, you need a deployment package and an execution role. The deployment package is a .zip file archive or container image that contains your function code. The execution role grants the function permission to use Amazon Web Services services, such as Amazon CloudWatch Logs for log streaming and X-Ray for request tracing. You set the package type to Image if the deployment package is a container image. For a container image, the code property must include the URI of a container image in the Amazon ECR registry. You do not need to specify the handler and runtime properties.  You set the package type to Zip if the deployment package is a .zip file archive. For a .zip file archive, the code property specifies the location of the .zip file. You must also specify the handler and runtime properties. The code in the deployment package must be compatible with the target instruction set architecture of the function (x86-64 or arm64). If you do not specify the architecture, the default value is x86-64. When you create a function, Lambda provisions an instance of the function and its supporting resources. If your function connects to a VPC, this process can take a minute or so. During this time, you can't invoke or modify the function. The State, StateReason, and StateReasonCode fields in the response from GetFunctionConfiguration indicate when the function is ready to invoke. For more information, see Function States. A function has an unpublished version, and can have published versions and aliases. The unpublished version changes when you update your function's code and configuration. A published version is a snapshot of your function code and configuration that can't be changed. An alias is a named resource that maps to a version, and can be changed to map to a different version. Use the Publish parameter to create version 1 of your function from its initial configuration. The other parameters let you configure version-specific and function-level settings. You can modify version-specific settings later with UpdateFunctionConfiguration. Function-level settings apply to both the unpublished and published versions of the function, and include tags (TagResource) and per-function concurrency limits (PutFunctionConcurrency). You can use code signing if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with UpdateFunctionCode, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes set set of signing profiles, which define the trusted publishers for this function. If another account or an Amazon Web Services service invokes your function, use AddPermission to grant permission by creating a resource-based IAM policy. You can grant permissions at the function level, on a version, or on an alias. To invoke your function directly, use Invoke. To invoke your function in response to events in other Amazon Web Services services, create an event source mapping (CreateEventSourceMapping), or configure a function trigger in the other service. For more information, see Invoking Functions.
    */
   createFunction(params: Lambda.Types.CreateFunctionRequest, callback?: (err: AWSError, data: Lambda.Types.FunctionConfiguration) => void): Request<Lambda.Types.FunctionConfiguration, AWSError>;
   /**
-   * Creates a Lambda function. To create a function, you need a deployment package and an execution role. The deployment package is a .zip file archive or container image that contains your function code. The execution role grants the function permission to use Amazon Web Services services, such as Amazon CloudWatch Logs for log streaming and X-Ray for request tracing. You set the package type to Image if the deployment package is a container image. For a container image, the code property must include the URI of a container image in the Amazon ECR registry. You do not need to specify the handler and runtime properties.  You set the package type to Zip if the deployment package is a .zip file archive. For a .zip file archive, the code property specifies the location of the .zip file. You must also specify the handler and runtime properties. When you create a function, Lambda provisions an instance of the function and its supporting resources. If your function connects to a VPC, this process can take a minute or so. During this time, you can't invoke or modify the function. The State, StateReason, and StateReasonCode fields in the response from GetFunctionConfiguration indicate when the function is ready to invoke. For more information, see Function States. A function has an unpublished version, and can have published versions and aliases. The unpublished version changes when you update your function's code and configuration. A published version is a snapshot of your function code and configuration that can't be changed. An alias is a named resource that maps to a version, and can be changed to map to a different version. Use the Publish parameter to create version 1 of your function from its initial configuration. The other parameters let you configure version-specific and function-level settings. You can modify version-specific settings later with UpdateFunctionConfiguration. Function-level settings apply to both the unpublished and published versions of the function, and include tags (TagResource) and per-function concurrency limits (PutFunctionConcurrency). You can use code signing if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with UpdateFunctionCode, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes set set of signing profiles, which define the trusted publishers for this function. If another account or an Amazon Web Services service invokes your function, use AddPermission to grant permission by creating a resource-based IAM policy. You can grant permissions at the function level, on a version, or on an alias. To invoke your function directly, use Invoke. To invoke your function in response to events in other Amazon Web Services services, create an event source mapping (CreateEventSourceMapping), or configure a function trigger in the other service. For more information, see Invoking Functions.
+   * Creates a Lambda function. To create a function, you need a deployment package and an execution role. The deployment package is a .zip file archive or container image that contains your function code. The execution role grants the function permission to use Amazon Web Services services, such as Amazon CloudWatch Logs for log streaming and X-Ray for request tracing. You set the package type to Image if the deployment package is a container image. For a container image, the code property must include the URI of a container image in the Amazon ECR registry. You do not need to specify the handler and runtime properties.  You set the package type to Zip if the deployment package is a .zip file archive. For a .zip file archive, the code property specifies the location of the .zip file. You must also specify the handler and runtime properties. The code in the deployment package must be compatible with the target instruction set architecture of the function (x86-64 or arm64). If you do not specify the architecture, the default value is x86-64. When you create a function, Lambda provisions an instance of the function and its supporting resources. If your function connects to a VPC, this process can take a minute or so. During this time, you can't invoke or modify the function. The State, StateReason, and StateReasonCode fields in the response from GetFunctionConfiguration indicate when the function is ready to invoke. For more information, see Function States. A function has an unpublished version, and can have published versions and aliases. The unpublished version changes when you update your function's code and configuration. A published version is a snapshot of your function code and configuration that can't be changed. An alias is a named resource that maps to a version, and can be changed to map to a different version. Use the Publish parameter to create version 1 of your function from its initial configuration. The other parameters let you configure version-specific and function-level settings. You can modify version-specific settings later with UpdateFunctionConfiguration. Function-level settings apply to both the unpublished and published versions of the function, and include tags (TagResource) and per-function concurrency limits (PutFunctionConcurrency). You can use code signing if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with UpdateFunctionCode, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes set set of signing profiles, which define the trusted publishers for this function. If another account or an Amazon Web Services service invokes your function, use AddPermission to grant permission by creating a resource-based IAM policy. You can grant permissions at the function level, on a version, or on an alias. To invoke your function directly, use Invoke. To invoke your function in response to events in other Amazon Web Services services, create an event source mapping (CreateEventSourceMapping), or configure a function trigger in the other service. For more information, see Invoking Functions.
    */
   createFunction(callback?: (err: AWSError, data: Lambda.Types.FunctionConfiguration) => void): Request<Lambda.Types.FunctionConfiguration, AWSError>;
   /**
@@ -310,19 +310,19 @@ declare class Lambda extends Service {
    */
   listFunctionsByCodeSigningConfig(callback?: (err: AWSError, data: Lambda.Types.ListFunctionsByCodeSigningConfigResponse) => void): Request<Lambda.Types.ListFunctionsByCodeSigningConfigResponse, AWSError>;
   /**
-   * Lists the versions of an Lambda layer. Versions that have been deleted aren't listed. Specify a runtime identifier to list only versions that indicate that they're compatible with that runtime.
+   * Lists the versions of an Lambda layer. Versions that have been deleted aren't listed. Specify a runtime identifier to list only versions that indicate that they're compatible with that runtime. Specify a compatible architecture to include only layer versions that are compatible with that architecture.
    */
   listLayerVersions(params: Lambda.Types.ListLayerVersionsRequest, callback?: (err: AWSError, data: Lambda.Types.ListLayerVersionsResponse) => void): Request<Lambda.Types.ListLayerVersionsResponse, AWSError>;
   /**
-   * Lists the versions of an Lambda layer. Versions that have been deleted aren't listed. Specify a runtime identifier to list only versions that indicate that they're compatible with that runtime.
+   * Lists the versions of an Lambda layer. Versions that have been deleted aren't listed. Specify a runtime identifier to list only versions that indicate that they're compatible with that runtime. Specify a compatible architecture to include only layer versions that are compatible with that architecture.
    */
   listLayerVersions(callback?: (err: AWSError, data: Lambda.Types.ListLayerVersionsResponse) => void): Request<Lambda.Types.ListLayerVersionsResponse, AWSError>;
   /**
-   * Lists Lambda layers and shows information about the latest version of each. Specify a runtime identifier to list only layers that indicate that they're compatible with that runtime.
+   * Lists Lambda layers and shows information about the latest version of each. Specify a runtime identifier to list only layers that indicate that they're compatible with that runtime. Specify a compatible architecture to include only layers that are compatible with that instruction set architecture.
    */
   listLayers(params: Lambda.Types.ListLayersRequest, callback?: (err: AWSError, data: Lambda.Types.ListLayersResponse) => void): Request<Lambda.Types.ListLayersResponse, AWSError>;
   /**
-   * Lists Lambda layers and shows information about the latest version of each. Specify a runtime identifier to list only layers that indicate that they're compatible with that runtime.
+   * Lists Lambda layers and shows information about the latest version of each. Specify a runtime identifier to list only layers that indicate that they're compatible with that runtime. Specify a compatible architecture to include only layers that are compatible with that instruction set architecture.
    */
   listLayers(callback?: (err: AWSError, data: Lambda.Types.ListLayersResponse) => void): Request<Lambda.Types.ListLayersResponse, AWSError>;
   /**
@@ -594,7 +594,7 @@ declare namespace Lambda {
      */
     Principal: Principal;
     /**
-     * For Amazon Web Services services, the ARN of the Amazon Web Services resource that invokes the function. For example, an Amazon S3 bucket or Amazon SNS topic.
+     * For Amazon Web Services services, the ARN of the Amazon Web Services resource that invokes the function. For example, an Amazon S3 bucket or Amazon SNS topic. Note that Lambda configures the comparison using the StringLike operator.
      */
     SourceArn?: Arn;
     /**
@@ -662,6 +662,8 @@ declare namespace Lambda {
      */
     SigningProfileVersionArns: SigningProfileVersionArns;
   }
+  export type Architecture = "x86_64"|"arm64"|string;
+  export type ArchitecturesList = Architecture[];
   export type Arn = string;
   export type BatchSize = number;
   export type BisectBatchOnFunctionError = boolean;
@@ -704,6 +706,7 @@ declare namespace Lambda {
     UntrustedArtifactOnDeployment?: CodeSigningPolicy;
   }
   export type CodeSigningPolicy = "Warn"|"Enforce"|string;
+  export type CompatibleArchitectures = Architecture[];
   export type CompatibleRuntimes = Runtime[];
   export interface Concurrency {
     /**
@@ -763,15 +766,15 @@ declare namespace Lambda {
      */
     FunctionName: FunctionName;
     /**
-     * If true, the event source mapping is active. Set to false to pause polling and invocation.
+     * When true, the event source mapping is active. When false, Lambda pauses polling and invocation. Default: True
      */
     Enabled?: Enabled;
     /**
-     * The maximum number of items to retrieve in a single batch.    Amazon Kinesis - Default 100. Max 10,000.    Amazon DynamoDB Streams - Default 100. Max 1,000.    Amazon Simple Queue Service - Default 10. For standard queues the max is 10,000. For FIFO queues the max is 10.    Amazon Managed Streaming for Apache Kafka - Default 100. Max 10,000.    Self-Managed Apache Kafka - Default 100. Max 10,000.  
+     * The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).    Amazon Kinesis - Default 100. Max 10,000.    Amazon DynamoDB Streams - Default 100. Max 1,000.    Amazon Simple Queue Service - Default 10. For standard queues the max is 10,000. For FIFO queues the max is 10.    Amazon Managed Streaming for Apache Kafka - Default 100. Max 10,000.    Self-Managed Apache Kafka - Default 100. Max 10,000.  
      */
     BatchSize?: BatchSize;
     /**
-     * (Streams and SQS standard queues) The maximum amount of time to gather records before invoking the function, in seconds.
+     * (Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function. Default: 0 Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.
      */
     MaximumBatchingWindowInSeconds?: MaximumBatchingWindowInSeconds;
     /**
@@ -908,6 +911,10 @@ declare namespace Lambda {
      * To enable code signing for this function, specify the ARN of a code-signing configuration. A code-signing configuration includes a set of signing profiles, which define the trusted publishers for this function.
      */
     CodeSigningConfigArn?: CodeSigningConfigArn;
+    /**
+     * The instruction set architecture that the function supports. Enter a string array with one of the valid values. The default value is x86_64.
+     */
+    Architectures?: ArchitecturesList;
   }
   export type _Date = Date;
   export interface DeadLetterConfig {
@@ -1052,11 +1059,11 @@ declare namespace Lambda {
      */
     StartingPositionTimestamp?: _Date;
     /**
-     * The maximum number of items to retrieve in a single batch.
+     * The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB). Default value: Varies by service. For Amazon SQS, the default is 10. For all other services, the default is 100. Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.
      */
     BatchSize?: BatchSize;
     /**
-     * (Streams and Amazon SQS standard queues) The maximum amount of time to gather records before invoking the function, in seconds. The default value is zero.
+     * (Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function. Default: 0 Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.
      */
     MaximumBatchingWindowInSeconds?: MaximumBatchingWindowInSeconds;
     /**
@@ -1310,6 +1317,10 @@ declare namespace Lambda {
      * The ARN of the signing job.
      */
     SigningJobArn?: Arn;
+    /**
+     * The instruction set architecture that the function supports. Architecture is a string array with one of the valid values. The default architecture value is x86_64.
+     */
+    Architectures?: ArchitecturesList;
   }
   export interface FunctionEventInvokeConfig {
     /**
@@ -1524,6 +1535,10 @@ declare namespace Lambda {
      * The layer's software license.
      */
     LicenseInfo?: LicenseInfo;
+    /**
+     * A list of compatible instruction set architectures.
+     */
+    CompatibleArchitectures?: CompatibleArchitectures;
   }
   export interface GetPolicyRequest {
     /**
@@ -1628,7 +1643,7 @@ declare namespace Lambda {
      */
     InvocationType?: InvocationType;
     /**
-     * Set to Tail to include the execution log in the response.
+     * Set to Tail to include the execution log in the response. Applies to synchronously invoked functions only.
      */
     LogType?: LogType;
     /**
@@ -1778,6 +1793,10 @@ declare namespace Lambda {
      * The layer's open-source license.
      */
     LicenseInfo?: LicenseInfo;
+    /**
+     * A list of compatible instruction set architectures.
+     */
+    CompatibleArchitectures?: CompatibleArchitectures;
   }
   export type LayersList = LayersListItem[];
   export interface LayersListItem {
@@ -1965,6 +1984,10 @@ declare namespace Lambda {
      * The maximum number of versions to return.
      */
     MaxItems?: MaxLayerListItems;
+    /**
+     * The compatible instruction set architecture.
+     */
+    CompatibleArchitecture?: Architecture;
   }
   export interface ListLayerVersionsResponse {
     /**
@@ -1989,6 +2012,10 @@ declare namespace Lambda {
      * The maximum number of layers to return.
      */
     MaxItems?: MaxLayerListItems;
+    /**
+     * The compatible instruction set architecture.
+     */
+    CompatibleArchitecture?: Architecture;
   }
   export interface ListLayersResponse {
     /**
@@ -2026,7 +2053,7 @@ declare namespace Lambda {
   }
   export interface ListTagsRequest {
     /**
-     * The function's Amazon Resource Name (ARN).
+     * The function's Amazon Resource Name (ARN). Note: Lambda does not support adding tags to aliases or versions.
      */
     Resource: FunctionArn;
   }
@@ -2148,6 +2175,10 @@ declare namespace Lambda {
      * The layer's software license. It can be any of the following:   An SPDX license identifier. For example, MIT.   The URL of a license hosted on the internet. For example, https://opensource.org/licenses/MIT.   The full text of the license.  
      */
     LicenseInfo?: LicenseInfo;
+    /**
+     * A list of compatible instruction set architectures.
+     */
+    CompatibleArchitectures?: CompatibleArchitectures;
   }
   export interface PublishLayerVersionResponse {
     /**
@@ -2182,6 +2213,10 @@ declare namespace Lambda {
      * The layer's software license.
      */
     LicenseInfo?: LicenseInfo;
+    /**
+     * A list of compatible instruction set architectures.
+     */
+    CompatibleArchitectures?: CompatibleArchitectures;
   }
   export interface PublishVersionRequest {
     /**
@@ -2474,15 +2509,15 @@ declare namespace Lambda {
      */
     FunctionName?: FunctionName;
     /**
-     * If true, the event source mapping is active. Set to false to pause polling and invocation.
+     * When true, the event source mapping is active. When false, Lambda pauses polling and invocation. Default: True
      */
     Enabled?: Enabled;
     /**
-     * The maximum number of items to retrieve in a single batch.    Amazon Kinesis - Default 100. Max 10,000.    Amazon DynamoDB Streams - Default 100. Max 1,000.    Amazon Simple Queue Service - Default 10. For standard queues the max is 10,000. For FIFO queues the max is 10.    Amazon Managed Streaming for Apache Kafka - Default 100. Max 10,000.    Self-Managed Apache Kafka - Default 100. Max 10,000.  
+     * The maximum number of records in each batch that Lambda pulls from your stream or queue and sends to your function. Lambda passes all of the records in the batch to the function in a single call, up to the payload limit for synchronous invocation (6 MB).    Amazon Kinesis - Default 100. Max 10,000.    Amazon DynamoDB Streams - Default 100. Max 1,000.    Amazon Simple Queue Service - Default 10. For standard queues the max is 10,000. For FIFO queues the max is 10.    Amazon Managed Streaming for Apache Kafka - Default 100. Max 10,000.    Self-Managed Apache Kafka - Default 100. Max 10,000.  
      */
     BatchSize?: BatchSize;
     /**
-     * (Streams and SQS standard queues) The maximum amount of time to gather records before invoking the function, in seconds.
+     * (Streams and Amazon SQS standard queues) The maximum amount of time, in seconds, that Lambda spends gathering records before invoking the function. Default: 0 Related setting: When you set BatchSize to a value greater than 10, you must set MaximumBatchingWindowInSeconds to at least 1.
      */
     MaximumBatchingWindowInSeconds?: MaximumBatchingWindowInSeconds;
     /**
@@ -2555,6 +2590,10 @@ declare namespace Lambda {
      * Only update the function if the revision ID matches the ID that's specified. Use this option to avoid modifying a function that has changed since you last read it.
      */
     RevisionId?: String;
+    /**
+     * The instruction set architecture that the function supports. Enter a string array with one of the valid values. The default value is x86_64.
+     */
+    Architectures?: ArchitecturesList;
   }
   export interface UpdateFunctionConfigurationRequest {
     /**
@@ -2618,7 +2657,7 @@ declare namespace Lambda {
      */
     FileSystemConfigs?: FileSystemConfigList;
     /**
-     *  Container image configuration values that override the values in the container image Dockerfile.
+     *  Container image configuration values that override the values in the container image Docker file.
      */
     ImageConfig?: ImageConfig;
   }