aws-sdk 2.974.0 → 2.978.0

package/clients/mediaconvert.d.ts

@@ -995,7 +995,7 @@ All burn-in and DVB-Sub font settings must match.
      */
     Encryption?: CmafEncryptionSettings;
     /**
-     * Length of fragments to generate (in seconds). Fragment length must be compatible with GOP size and Framerate. Note that fragments will end on the next keyframe after this number of seconds, so actual fragment length may be longer. When Emit Single File is checked, the fragmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
+     * Specify the length, in whole seconds, of the mp4 fragments. When you don't specify a value, MediaConvert defaults to 2. Related setting: Use Fragment length control (FragmentLengthControl) to specify whether the encoder enforces this value strictly.
      */
     FragmentLength?: __integerMin1Max2147483647;
     /**
@@ -1031,9 +1031,13 @@ All burn-in and DVB-Sub font settings must match.
      */
     SegmentControl?: CmafSegmentControl;
     /**
-     * Use this setting to specify the length, in seconds, of each individual CMAF segment. This value applies to the whole package; that is, to every output in the output group. Note that segments end on the first keyframe after this number of seconds, so the actual segment length might be slightly longer. If you set Segment control (CmafSegmentControl) to single file, the service puts the content of each output in a single file that has metadata that marks these segments. If you set it to segmented files, the service creates multiple files for each output, each with the content of one segment.
+     * Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 10. Related settings: Use Segment length control (SegmentLengthControl) to specify whether the encoder enforces this value strictly. Use Segment control (CmafSegmentControl) to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.
      */
     SegmentLength?: __integerMin1Max2147483647;
+    /**
+     * Specify how you want MediaConvert to determine the segment length. Choose Exact (EXACT) to have the encoder use the exact length that you specify with the setting Segment length (SegmentLength). This might result in extra I-frames. Choose Multiple of GOP (GOP_MULTIPLE) to have the encoder round up the segment lengths to match the next GOP boundary.
+     */
+    SegmentLengthControl?: CmafSegmentLengthControl;
     /**
      * Include or exclude RESOLUTION attribute for video in EXT-X-STREAM-INF tag of variant manifest.
      */
@@ -1063,6 +1067,7 @@ All burn-in and DVB-Sub font settings must match.
   export type CmafMpdProfile = "MAIN_PROFILE"|"ON_DEMAND_PROFILE"|string;
   export type CmafPtsOffsetHandlingForBFrames = "ZERO_BASED"|"MATCH_INITIAL_PTS"|string;
   export type CmafSegmentControl = "SINGLE_FILE"|"SEGMENTED_FILES"|string;
+  export type CmafSegmentLengthControl = "EXACT"|"GOP_MULTIPLE"|string;
   export type CmafStreamInfResolution = "INCLUDE"|"EXCLUDE"|string;
   export type CmafTargetDurationCompatibilityMode = "LEGACY"|"SPEC_COMPLIANT"|string;
   export type CmafWriteDASHManifest = "DISABLED"|"ENABLED"|string;
@@ -1430,9 +1435,13 @@ All burn-in and DVB-Sub font settings must match.
      */
     SegmentControl?: DashIsoSegmentControl;
     /**
-     * Length of mpd segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer. When Emit Single File is checked, the segmentation is internal to a single output file and it does not cause the creation of many output files as in other output types.
+     * Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 30. Related settings: Use Segment length control (SegmentLengthControl) to specify whether the encoder enforces this value strictly. Use Segment control (DashIsoSegmentControl) to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.
      */
     SegmentLength?: __integerMin1Max2147483647;
+    /**
+     * Specify how you want MediaConvert to determine the segment length. Choose Exact (EXACT) to have the encoder use the exact length that you specify with the setting Segment length (SegmentLength). This might result in extra I-frames. Choose Multiple of GOP (GOP_MULTIPLE) to have the encoder round up the segment lengths to match the next GOP boundary.
+     */
+    SegmentLengthControl?: DashIsoSegmentLengthControl;
     /**
      * If you get an HTTP error in the 400 range when you play back your DASH output, enable this setting and run your transcoding job again. When you enable this setting, the service writes precise segment durations in the DASH manifest. The segment duration information appears inside the SegmentTimeline element, inside SegmentTemplate at the Representation level. When you don't enable this setting, the service writes approximate segment durations in your DASH manifest.
      */
@@ -1444,6 +1453,7 @@ All burn-in and DVB-Sub font settings must match.
   export type DashIsoPlaybackDeviceCompatibility = "CENC_V1"|"UNENCRYPTED_SEI"|string;
   export type DashIsoPtsOffsetHandlingForBFrames = "ZERO_BASED"|"MATCH_INITIAL_PTS"|string;
   export type DashIsoSegmentControl = "SINGLE_FILE"|"SEGMENTED_FILES"|string;
+  export type DashIsoSegmentLengthControl = "EXACT"|"GOP_MULTIPLE"|string;
   export type DashIsoWriteSegmentTimelineInRepresentation = "ENABLED"|"DISABLED"|string;
   export type DecryptionMode = "AES_CTR"|"AES_CBC"|"AES_GCM"|string;
   export type DeinterlaceAlgorithm = "INTERPOLATE"|"INTERPOLATE_TICKER"|"BLEND"|"BLEND_TICKER"|string;
@@ -2063,7 +2073,7 @@ All burn-in and DVB-Sub font settings must match.
   export type H264CodecProfile = "BASELINE"|"HIGH"|"HIGH_10BIT"|"HIGH_422"|"HIGH_422_10BIT"|"MAIN"|string;
   export type H264DynamicSubGop = "ADAPTIVE"|"STATIC"|string;
   export type H264EntropyEncoding = "CABAC"|"CAVLC"|string;
-  export type H264FieldEncoding = "PAFF"|"FORCE_FIELD"|string;
+  export type H264FieldEncoding = "PAFF"|"FORCE_FIELD"|"MBAFF"|string;
   export type H264FlickerAdaptiveQuantization = "DISABLED"|"ENABLED"|string;
   export type H264FramerateControl = "INITIALIZE_FROM_SOURCE"|"SPECIFIED"|string;
   export type H264FramerateConversionAlgorithm = "DUPLICATE_DROP"|"INTERPOLATE"|"FRAMEFORMER"|string;
@@ -2116,7 +2126,7 @@ All burn-in and DVB-Sub font settings must match.
      */
     EntropyEncoding?: H264EntropyEncoding;
     /**
-     * Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields.
+     * The video encoding method for your MPEG-4 AVC output. Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field (FORCE_FIELD) to disable PAFF encoding and create separate interlaced fields. Choose MBAFF to disable PAFF and have MediaConvert use MBAFF encoding for interlaced outputs.
      */
     FieldEncoding?: H264FieldEncoding;
     /**
@@ -2176,7 +2186,7 @@ All burn-in and DVB-Sub font settings must match.
      */
     MinIInterval?: __integerMin0Max30;
     /**
-     * Number of B-frames between reference frames.
+     * Specify the number of B-frames that MediaConvert puts between reference frames in this output. Valid values are whole numbers from 0 through 7. When you don't specify a value, MediaConvert defaults to 2.
      */
     NumberBFramesBetweenReferenceFrames?: __integerMin0Max7;
     /**
@@ -2371,7 +2381,7 @@ All burn-in and DVB-Sub font settings must match.
      */
     MinIInterval?: __integerMin0Max30;
     /**
-     * Number of B-frames between reference frames.
+     * Specify the number of B-frames that MediaConvert puts between reference frames in this output. Valid values are whole numbers from 0 through 7. When you don't specify a value, MediaConvert defaults to 2.
      */
     NumberBFramesBetweenReferenceFrames?: __integerMin0Max7;
     /**
@@ -2673,9 +2683,13 @@ All burn-in and DVB-Sub font settings must match.
      */
     SegmentControl?: HlsSegmentControl;
     /**
-     * Length of MPEG-2 Transport Stream segments to create (in seconds). Note that segments will end on the next keyframe after this number of seconds, so actual segment length may be longer.
+     * Specify the length, in whole seconds, of each segment. When you don't specify a value, MediaConvert defaults to 10. Related settings: Use Segment length control (SegmentLengthControl) to specify whether the encoder enforces this value strictly. Use Segment control (HlsSegmentControl) to specify whether MediaConvert creates separate segment files or one content file that has metadata to mark the segment boundaries.
      */
     SegmentLength?: __integerMin1Max2147483647;
+    /**
+     * Specify how you want MediaConvert to determine the segment length. Choose Exact (EXACT) to have the encoder use the exact length that you specify with the setting Segment length (SegmentLength). This might result in extra I-frames. Choose Multiple of GOP (GOP_MULTIPLE) to have the encoder round up the segment lengths to match the next GOP boundary.
+     */
+    SegmentLengthControl?: HlsSegmentLengthControl;
     /**
      * Number of segments to write to a subdirectory before starting a new one. directoryStructure must be SINGLE_DIRECTORY for this setting to have an effect.
      */
@@ -2725,6 +2739,7 @@ All burn-in and DVB-Sub font settings must match.
     RenditionName?: __string;
   }
   export type HlsSegmentControl = "SINGLE_FILE"|"SEGMENTED_FILES"|string;
+  export type HlsSegmentLengthControl = "EXACT"|"GOP_MULTIPLE"|string;
   export interface HlsSettings {
     /**
      * Specifies the group to which the audio rendition belongs.
@@ -3492,6 +3507,7 @@ All burn-in and DVB-Sub font settings must match.
   export type M2tsAudioBufferModel = "DVB"|"ATSC"|string;
   export type M2tsAudioDuration = "DEFAULT_CODEC_DURATION"|"MATCH_VIDEO_DURATION"|string;
   export type M2tsBufferModel = "MULTIPLEX"|"NONE"|string;
+  export type M2tsDataPtsControl = "AUTO"|"ALIGN_TO_VIDEO"|string;
   export type M2tsEbpAudioInterval = "VIDEO_AND_FIXED_INTERVALS"|"VIDEO_INTERVAL"|string;
   export type M2tsEbpPlacement = "VIDEO_AND_AUDIO_PIDS"|"VIDEO_PID"|string;
   export type M2tsEsRateInPes = "INCLUDE"|"EXCLUDE"|string;
@@ -3533,6 +3549,10 @@ All burn-in and DVB-Sub font settings must match.
      * Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex  buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.
      */
     BufferModel?: M2tsBufferModel;
+    /**
+     * If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value (AUTO) to allow all PTS values.
+     */
+    DataPTSControl?: M2tsDataPtsControl;
     /**
      * Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output. When you work directly in your JSON job specification, include this object only when your job has a transport stream output and the container settings contain the object M2tsSettings.
      */
@@ -3659,6 +3679,7 @@ All burn-in and DVB-Sub font settings must match.
     VideoPid?: __integerMin32Max8182;
   }
   export type M3u8AudioDuration = "DEFAULT_CODEC_DURATION"|"MATCH_VIDEO_DURATION"|string;
+  export type M3u8DataPtsControl = "AUTO"|"ALIGN_TO_VIDEO"|string;
   export type M3u8NielsenId3 = "INSERT"|"NONE"|string;
   export type M3u8PcrControl = "PCR_EVERY_PES_PACKET"|"CONFIGURED_PCR_PERIOD"|string;
   export type M3u8Scte35Source = "PASSTHROUGH"|"NONE"|string;
@@ -3675,6 +3696,10 @@ All burn-in and DVB-Sub font settings must match.
      * Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.
      */
     AudioPids?: __listOf__integerMin32Max8182;
+    /**
+     * If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value (AUTO) to allow all PTS values.
+     */
+    DataPTSControl?: M3u8DataPtsControl;
     /**
      * Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.
      */
@@ -3960,11 +3985,11 @@ All burn-in and DVB-Sub font settings must match.
      */
     GopClosedCadence?: __integerMin0Max2147483647;
     /**
-     * GOP Length (keyframe interval) in frames or seconds. Must be greater than zero.
+     * Specify the interval between keyframes, in seconds or frames, for this output. Default: 12 Related settings: When you specify the GOP size in seconds, set GOP mode control (GopSizeUnits) to Specified, seconds (SECONDS). The default value for GOP mode control (GopSizeUnits) is Frames (FRAMES).
      */
     GopSize?: __doubleMin0;
     /**
-     * Indicates if the GOP Size in MPEG2 is specified in frames or seconds. If seconds the system will convert the GOP Size into a frame count at run time.
+     * Specify the units for GOP size (GopSize). If you don't specify a value here, by default the encoder measures GOP size in frames.
      */
     GopSizeUnits?: Mpeg2GopSizeUnits;
     /**
@@ -3992,7 +4017,7 @@ All burn-in and DVB-Sub font settings must match.
      */
     MinIInterval?: __integerMin0Max30;
     /**
-     * Number of B-frames between reference frames.
+     * Specify the number of B-frames that MediaConvert puts between reference frames in this output. Valid values are whole numbers from 0 through 7. When you don't specify a value, MediaConvert defaults to 2.
      */
     NumberBFramesBetweenReferenceFrames?: __integerMin0Max7;
     /**
@@ -4070,6 +4095,7 @@ All burn-in and DVB-Sub font settings must match.
      */
     SpekeKeyProvider?: SpekeKeyProvider;
   }
+  export type MsSmoothFragmentLengthControl = "EXACT"|"GOP_MULTIPLE"|string;
   export interface MsSmoothGroupSettings {
     /**
      * By default, the service creates one .ism Microsoft Smooth Streaming manifest for each Microsoft Smooth Streaming output group in your job. This default manifest references every output in the output group. To create additional manifests that reference a subset of the outputs in the output group, specify a list of them here.
@@ -4092,9 +4118,13 @@ All burn-in and DVB-Sub font settings must match.
      */
     Encryption?: MsSmoothEncryptionSettings;
     /**
-     * Use Fragment length (FragmentLength) to specify the mp4 fragment sizes in seconds. Fragment length must be compatible with GOP size and frame rate.
+     * Specify how you want MediaConvert to determine the fragment length. Choose Exact (EXACT) to have the encoder use the exact length that you specify with the setting Fragment length (FragmentLength). This might result in extra I-frames. Choose Multiple of GOP (GOP_MULTIPLE) to have the encoder round up the segment lengths to match the next GOP boundary.
      */
     FragmentLength?: __integerMin1Max2147483647;
+    /**
+     * Specify how you want MediaConvert to determine the fragment length. Choose Exact (EXACT) to have the encoder use the exact length that you specify with the setting Fragment length (FragmentLength). This might result in extra I-frames. Choose Multiple of GOP (GOP_MULTIPLE) to have the encoder round up the segment lengths to match the next GOP boundary.
+     */
+    FragmentLengthControl?: MsSmoothFragmentLengthControl;
     /**
      * Use Manifest encoding (MsSmoothManifestEncoding) to specify the encoding format for the server and client manifest. Valid options are utf8 and utf16.
      */
@@ -4685,6 +4715,10 @@ All burn-in and DVB-Sub font settings must match.
      * Specify how you want your data keys managed. AWS uses data keys to encrypt your content. AWS also encrypts the data keys themselves, using a customer master key (CMK), and then stores the encrypted data keys alongside your encrypted content. Use this setting to specify which AWS service manages the CMK. For simplest set up, choose Amazon S3 (SERVER_SIDE_ENCRYPTION_S3). If you want your master key to be managed by AWS Key Management Service (KMS), choose AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). By default, when you choose AWS KMS, KMS uses the AWS managed customer master key (CMK) associated with Amazon S3 to encrypt your data keys. You can optionally choose to specify a different, customer managed CMK. Do so by specifying the Amazon Resource Name (ARN) of the key for the setting  KMS ARN (kmsKeyArn).
      */
     EncryptionType?: S3ServerSideEncryptionType;
+    /**
+     * Optionally, specify the encryption context that you want to use alongside your KMS key. AWS KMS uses this encryption context as additional authenticated data (AAD) to support authenticated encryption. This value must be a base64-encoded UTF-8 string holding JSON which represents a string-string map. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). For more information about encryption context, see: https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#encrypt_context.
+     */
+    KmsEncryptionContext?: __stringPatternAZaZ0902;
     /**
      * Optionally, specify the customer master key (CMK) that you want to use to encrypt the data key that AWS uses to encrypt your output content. Enter the Amazon Resource Name (ARN) of the CMK. To use this setting, you must also set Server-side encryption (S3ServerSideEncryptionType) to AWS KMS (SERVER_SIDE_ENCRYPTION_KMS). If you set Server-side encryption to AWS KMS but don't specify a CMK here, AWS uses the AWS managed CMK associated with Amazon S3.
      */

package/clients/polly.d.ts

@@ -14,11 +14,11 @@ declare class Polly extends PollyCustomizations {
   constructor(options?: Polly.Types.ClientConfiguration)
   config: Config & Polly.Types.ClientConfiguration;
   /**
-   * Deletes the specified pronunciation lexicon stored in an AWS Region. A lexicon which has been deleted is not available for speech synthesis, nor is it possible to retrieve it using either the GetLexicon or ListLexicon APIs. For more information, see Managing Lexicons.
+   * Deletes the specified pronunciation lexicon stored in an Amazon Web Services Region. A lexicon which has been deleted is not available for speech synthesis, nor is it possible to retrieve it using either the GetLexicon or ListLexicon APIs. For more information, see Managing Lexicons.
    */
   deleteLexicon(params: Polly.Types.DeleteLexiconInput, callback?: (err: AWSError, data: Polly.Types.DeleteLexiconOutput) => void): Request<Polly.Types.DeleteLexiconOutput, AWSError>;
   /**
-   * Deletes the specified pronunciation lexicon stored in an AWS Region. A lexicon which has been deleted is not available for speech synthesis, nor is it possible to retrieve it using either the GetLexicon or ListLexicon APIs. For more information, see Managing Lexicons.
+   * Deletes the specified pronunciation lexicon stored in an Amazon Web Services Region. A lexicon which has been deleted is not available for speech synthesis, nor is it possible to retrieve it using either the GetLexicon or ListLexicon APIs. For more information, see Managing Lexicons.
    */
   deleteLexicon(callback?: (err: AWSError, data: Polly.Types.DeleteLexiconOutput) => void): Request<Polly.Types.DeleteLexiconOutput, AWSError>;
   /**
@@ -30,11 +30,11 @@ declare class Polly extends PollyCustomizations {
    */
   describeVoices(callback?: (err: AWSError, data: Polly.Types.DescribeVoicesOutput) => void): Request<Polly.Types.DescribeVoicesOutput, AWSError>;
   /**
-   * Returns the content of the specified pronunciation lexicon stored in an AWS Region. For more information, see Managing Lexicons.
+   * Returns the content of the specified pronunciation lexicon stored in an Amazon Web Services Region. For more information, see Managing Lexicons.
    */
   getLexicon(params: Polly.Types.GetLexiconInput, callback?: (err: AWSError, data: Polly.Types.GetLexiconOutput) => void): Request<Polly.Types.GetLexiconOutput, AWSError>;
   /**
-   * Returns the content of the specified pronunciation lexicon stored in an AWS Region. For more information, see Managing Lexicons.
+   * Returns the content of the specified pronunciation lexicon stored in an Amazon Web Services Region. For more information, see Managing Lexicons.
    */
   getLexicon(callback?: (err: AWSError, data: Polly.Types.GetLexiconOutput) => void): Request<Polly.Types.GetLexiconOutput, AWSError>;
   /**
@@ -46,11 +46,11 @@ declare class Polly extends PollyCustomizations {
    */
   getSpeechSynthesisTask(callback?: (err: AWSError, data: Polly.Types.GetSpeechSynthesisTaskOutput) => void): Request<Polly.Types.GetSpeechSynthesisTaskOutput, AWSError>;
   /**
-   * Returns a list of pronunciation lexicons stored in an AWS Region. For more information, see Managing Lexicons.
+   * Returns a list of pronunciation lexicons stored in an Amazon Web Services Region. For more information, see Managing Lexicons.
    */
   listLexicons(params: Polly.Types.ListLexiconsInput, callback?: (err: AWSError, data: Polly.Types.ListLexiconsOutput) => void): Request<Polly.Types.ListLexiconsOutput, AWSError>;
   /**
-   * Returns a list of pronunciation lexicons stored in an AWS Region. For more information, see Managing Lexicons.
+   * Returns a list of pronunciation lexicons stored in an Amazon Web Services Region. For more information, see Managing Lexicons.
    */
   listLexicons(callback?: (err: AWSError, data: Polly.Types.ListLexiconsOutput) => void): Request<Polly.Types.ListLexiconsOutput, AWSError>;
   /**
@@ -62,19 +62,19 @@ declare class Polly extends PollyCustomizations {
    */
   listSpeechSynthesisTasks(callback?: (err: AWSError, data: Polly.Types.ListSpeechSynthesisTasksOutput) => void): Request<Polly.Types.ListSpeechSynthesisTasksOutput, AWSError>;
   /**
-   * Stores a pronunciation lexicon in an AWS Region. If a lexicon with the same name already exists in the region, it is overwritten by the new lexicon. Lexicon operations have eventual consistency, therefore, it might take some time before the lexicon is available to the SynthesizeSpeech operation. For more information, see Managing Lexicons.
+   * Stores a pronunciation lexicon in an Amazon Web Services Region. If a lexicon with the same name already exists in the region, it is overwritten by the new lexicon. Lexicon operations have eventual consistency, therefore, it might take some time before the lexicon is available to the SynthesizeSpeech operation. For more information, see Managing Lexicons.
    */
   putLexicon(params: Polly.Types.PutLexiconInput, callback?: (err: AWSError, data: Polly.Types.PutLexiconOutput) => void): Request<Polly.Types.PutLexiconOutput, AWSError>;
   /**
-   * Stores a pronunciation lexicon in an AWS Region. If a lexicon with the same name already exists in the region, it is overwritten by the new lexicon. Lexicon operations have eventual consistency, therefore, it might take some time before the lexicon is available to the SynthesizeSpeech operation. For more information, see Managing Lexicons.
+   * Stores a pronunciation lexicon in an Amazon Web Services Region. If a lexicon with the same name already exists in the region, it is overwritten by the new lexicon. Lexicon operations have eventual consistency, therefore, it might take some time before the lexicon is available to the SynthesizeSpeech operation. For more information, see Managing Lexicons.
    */
   putLexicon(callback?: (err: AWSError, data: Polly.Types.PutLexiconOutput) => void): Request<Polly.Types.PutLexiconOutput, AWSError>;
   /**
-   * Allows the creation of an asynchronous synthesis task, by starting a new SpeechSynthesisTask. This operation requires all the standard information needed for speech synthesis, plus the name of an Amazon S3 bucket for the service to store the output of the synthesis task and two optional parameters (OutputS3KeyPrefix and SnsTopicArn). Once the synthesis task is created, this operation will return a SpeechSynthesisTask object, which will include an identifier of this task as well as the current status.
+   * Allows the creation of an asynchronous synthesis task, by starting a new SpeechSynthesisTask. This operation requires all the standard information needed for speech synthesis, plus the name of an Amazon S3 bucket for the service to store the output of the synthesis task and two optional parameters (OutputS3KeyPrefix and SnsTopicArn). Once the synthesis task is created, this operation will return a SpeechSynthesisTask object, which will include an identifier of this task as well as the current status. The SpeechSynthesisTask object is available for 72 hours after starting the asynchronous synthesis task.
    */
   startSpeechSynthesisTask(params: Polly.Types.StartSpeechSynthesisTaskInput, callback?: (err: AWSError, data: Polly.Types.StartSpeechSynthesisTaskOutput) => void): Request<Polly.Types.StartSpeechSynthesisTaskOutput, AWSError>;
   /**
-   * Allows the creation of an asynchronous synthesis task, by starting a new SpeechSynthesisTask. This operation requires all the standard information needed for speech synthesis, plus the name of an Amazon S3 bucket for the service to store the output of the synthesis task and two optional parameters (OutputS3KeyPrefix and SnsTopicArn). Once the synthesis task is created, this operation will return a SpeechSynthesisTask object, which will include an identifier of this task as well as the current status.
+   * Allows the creation of an asynchronous synthesis task, by starting a new SpeechSynthesisTask. This operation requires all the standard information needed for speech synthesis, plus the name of an Amazon S3 bucket for the service to store the output of the synthesis task and two optional parameters (OutputS3KeyPrefix and SnsTopicArn). Once the synthesis task is created, this operation will return a SpeechSynthesisTask object, which will include an identifier of this task as well as the current status. The SpeechSynthesisTask object is available for 72 hours after starting the asynchronous synthesis task.
    */
   startSpeechSynthesisTask(callback?: (err: AWSError, data: Polly.Types.StartSpeechSynthesisTaskOutput) => void): Request<Polly.Types.StartSpeechSynthesisTaskOutput, AWSError>;
   /**
@@ -162,7 +162,7 @@ declare namespace Polly {
     SynthesisTask?: SynthesisTask;
   }
   export type IncludeAdditionalLanguageCodes = boolean;
-  export type LanguageCode = "arb"|"cmn-CN"|"cy-GB"|"da-DK"|"de-DE"|"en-AU"|"en-GB"|"en-GB-WLS"|"en-IN"|"en-US"|"es-ES"|"es-MX"|"es-US"|"fr-CA"|"fr-FR"|"is-IS"|"it-IT"|"ja-JP"|"hi-IN"|"ko-KR"|"nb-NO"|"nl-NL"|"pl-PL"|"pt-BR"|"pt-PT"|"ro-RO"|"ru-RU"|"sv-SE"|"tr-TR"|string;
+  export type LanguageCode = "arb"|"cmn-CN"|"cy-GB"|"da-DK"|"de-DE"|"en-AU"|"en-GB"|"en-GB-WLS"|"en-IN"|"en-US"|"es-ES"|"es-MX"|"es-US"|"fr-CA"|"fr-FR"|"is-IS"|"it-IT"|"ja-JP"|"hi-IN"|"ko-KR"|"nb-NO"|"nl-NL"|"pl-PL"|"pt-BR"|"pt-PT"|"ro-RO"|"ru-RU"|"sv-SE"|"tr-TR"|"en-NZ"|string;
   export type LanguageCodeList = LanguageCode[];
   export type LanguageName = string;
   export type LastModified = Date;
@@ -288,7 +288,7 @@ declare namespace Polly {
      */
     Engine?: Engine;
     /**
-     * Optional language code for the Speech Synthesis request. This is only necessary if using a bilingual voice, such as Aditi, which can be used for either Indian English (en-IN) or Hindi (hi-IN).  If a bilingual voice is used and no language code is specified, Amazon Polly will use the default language of the bilingual voice. The default language for any voice is the one returned by the DescribeVoices operation for the LanguageCode parameter. For example, if no language code is specified, Aditi will use Indian English rather than Hindi.
+     * Optional language code for the Speech Synthesis request. This is only necessary if using a bilingual voice, such as Aditi, which can be used for either Indian English (en-IN) or Hindi (hi-IN).  If a bilingual voice is used and no language code is specified, Amazon Polly uses the default language of the bilingual voice. The default language for any voice is the one returned by the DescribeVoices operation for the LanguageCode parameter. For example, if no language code is specified, Aditi will use Indian English rather than Hindi.
      */
     LanguageCode?: LanguageCode;
     /**
@@ -396,7 +396,7 @@ declare namespace Polly {
      */
     VoiceId?: VoiceId;
     /**
-     * Optional language code for a synthesis task. This is only necessary if using a bilingual voice, such as Aditi, which can be used for either Indian English (en-IN) or Hindi (hi-IN).  If a bilingual voice is used and no language code is specified, Amazon Polly will use the default language of the bilingual voice. The default language for any voice is the one returned by the DescribeVoices operation for the LanguageCode parameter. For example, if no language code is specified, Aditi will use Indian English rather than Hindi.
+     * Optional language code for a synthesis task. This is only necessary if using a bilingual voice, such as Aditi, which can be used for either Indian English (en-IN) or Hindi (hi-IN).  If a bilingual voice is used and no language code is specified, Amazon Polly uses the default language of the bilingual voice. The default language for any voice is the one returned by the DescribeVoices operation for the LanguageCode parameter. For example, if no language code is specified, Aditi will use Indian English rather than Hindi.
      */
     LanguageCode?: LanguageCode;
   }
@@ -407,7 +407,7 @@ declare namespace Polly {
      */
     Engine?: Engine;
     /**
-     * Optional language code for the Synthesize Speech request. This is only necessary if using a bilingual voice, such as Aditi, which can be used for either Indian English (en-IN) or Hindi (hi-IN).  If a bilingual voice is used and no language code is specified, Amazon Polly will use the default language of the bilingual voice. The default language for any voice is the one returned by the DescribeVoices operation for the LanguageCode parameter. For example, if no language code is specified, Aditi will use Indian English rather than Hindi.
+     * Optional language code for the Synthesize Speech request. This is only necessary if using a bilingual voice, such as Aditi, which can be used for either Indian English (en-IN) or Hindi (hi-IN).  If a bilingual voice is used and no language code is specified, Amazon Polly uses the default language of the bilingual voice. The default language for any voice is the one returned by the DescribeVoices operation for the LanguageCode parameter. For example, if no language code is specified, Aditi will use Indian English rather than Hindi.
      */
     LanguageCode?: LanguageCode;
     /**
@@ -488,7 +488,7 @@ declare namespace Polly {
      */
     SupportedEngines?: EngineList;
   }
-  export type VoiceId = "Aditi"|"Amy"|"Astrid"|"Bianca"|"Brian"|"Camila"|"Carla"|"Carmen"|"Celine"|"Chantal"|"Conchita"|"Cristiano"|"Dora"|"Emma"|"Enrique"|"Ewa"|"Filiz"|"Gabrielle"|"Geraint"|"Giorgio"|"Gwyneth"|"Hans"|"Ines"|"Ivy"|"Jacek"|"Jan"|"Joanna"|"Joey"|"Justin"|"Karl"|"Kendra"|"Kevin"|"Kimberly"|"Lea"|"Liv"|"Lotte"|"Lucia"|"Lupe"|"Mads"|"Maja"|"Marlene"|"Mathieu"|"Matthew"|"Maxim"|"Mia"|"Miguel"|"Mizuki"|"Naja"|"Nicole"|"Olivia"|"Penelope"|"Raveena"|"Ricardo"|"Ruben"|"Russell"|"Salli"|"Seoyeon"|"Takumi"|"Tatyana"|"Vicki"|"Vitoria"|"Zeina"|"Zhiyu"|string;
+  export type VoiceId = "Aditi"|"Amy"|"Astrid"|"Bianca"|"Brian"|"Camila"|"Carla"|"Carmen"|"Celine"|"Chantal"|"Conchita"|"Cristiano"|"Dora"|"Emma"|"Enrique"|"Ewa"|"Filiz"|"Gabrielle"|"Geraint"|"Giorgio"|"Gwyneth"|"Hans"|"Ines"|"Ivy"|"Jacek"|"Jan"|"Joanna"|"Joey"|"Justin"|"Karl"|"Kendra"|"Kevin"|"Kimberly"|"Lea"|"Liv"|"Lotte"|"Lucia"|"Lupe"|"Mads"|"Maja"|"Marlene"|"Mathieu"|"Matthew"|"Maxim"|"Mia"|"Miguel"|"Mizuki"|"Naja"|"Nicole"|"Olivia"|"Penelope"|"Raveena"|"Ricardo"|"Ruben"|"Russell"|"Salli"|"Seoyeon"|"Takumi"|"Tatyana"|"Vicki"|"Vitoria"|"Zeina"|"Zhiyu"|"Aria"|string;
   export type VoiceList = Voice[];
   export type VoiceName = string;
   /**

package/clients/rekognition.d.ts

@@ -125,11 +125,11 @@ declare class Rekognition extends Service {
    */
   describeStreamProcessor(callback?: (err: AWSError, data: Rekognition.Types.DescribeStreamProcessorResponse) => void): Request<Rekognition.Types.DescribeStreamProcessorResponse, AWSError>;
   /**
-   * Detects custom labels in a supplied image by using an Amazon Rekognition Custom Labels model.  You specify which version of a model version to use by using the ProjectVersionArn input parameter.  You pass the input image as base64-encoded image bytes or as a reference to an image in an Amazon S3 bucket. If you use the AWS CLI to call Amazon Rekognition operations, passing image bytes is not supported. The image must be either a PNG or JPEG formatted file.   For each object that the model version detects on an image, the API returns a (CustomLabel) object in an array (CustomLabels). Each CustomLabel object provides the label name (Name), the level of confidence that the image contains the object (Confidence), and object location information, if it exists, for the label on the image (Geometry).  During training model calculates a threshold value that determines if a prediction for a label is true. By default, DetectCustomLabels doesn't return labels whose confidence value is below the model's calculated threshold value. To filter labels that are returned, specify a value for MinConfidence that is higher than the model's calculated threshold. You can get the model's calculated threshold from the model's training results shown in the Amazon Rekognition Custom Labels console. To get all labels, regardless of confidence, specify a MinConfidence value of 0.  You can also add the MaxResults parameter to limit the number of labels returned.  This is a stateless API operation. That is, the operation does not persist any data. This operation requires permissions to perform the rekognition:DetectCustomLabels action. 
+   * Detects custom labels in a supplied image by using an Amazon Rekognition Custom Labels model.  You specify which version of a model version to use by using the ProjectVersionArn input parameter.  You pass the input image as base64-encoded image bytes or as a reference to an image in an Amazon S3 bucket. If you use the AWS CLI to call Amazon Rekognition operations, passing image bytes is not supported. The image must be either a PNG or JPEG formatted file.   For each object that the model version detects on an image, the API returns a (CustomLabel) object in an array (CustomLabels). Each CustomLabel object provides the label name (Name), the level of confidence that the image contains the object (Confidence), and object location information, if it exists, for the label on the image (Geometry).  To filter labels that are returned, specify a value for MinConfidence. DetectCustomLabelsLabels only returns labels with a confidence that's higher than the specified value. The value of MinConfidence maps to the assumed threshold values created during training. For more information, see Assumed threshold in the Amazon Rekognition Custom Labels Developer Guide. Amazon Rekognition Custom Labels metrics expresses an assumed threshold as a floating point value between 0-1. The range of MinConfidence normalizes the threshold value to a percentage value (0-100). Confidence responses from DetectCustomLabels are also returned as a percentage. You can use MinConfidence to change the precision and recall or your model. For more information, see Analyzing an image in the Amazon Rekognition Custom Labels Developer Guide.  If you don't specify a value for MinConfidence, DetectCustomLabels returns labels based on the assumed threshold of each label. This is a stateless API operation. That is, the operation does not persist any data. This operation requires permissions to perform the rekognition:DetectCustomLabels action.  For more information, see Analyzing an image in the Amazon Rekognition Custom Labels Developer Guide. 
    */
   detectCustomLabels(params: Rekognition.Types.DetectCustomLabelsRequest, callback?: (err: AWSError, data: Rekognition.Types.DetectCustomLabelsResponse) => void): Request<Rekognition.Types.DetectCustomLabelsResponse, AWSError>;
   /**
-   * Detects custom labels in a supplied image by using an Amazon Rekognition Custom Labels model.  You specify which version of a model version to use by using the ProjectVersionArn input parameter.  You pass the input image as base64-encoded image bytes or as a reference to an image in an Amazon S3 bucket. If you use the AWS CLI to call Amazon Rekognition operations, passing image bytes is not supported. The image must be either a PNG or JPEG formatted file.   For each object that the model version detects on an image, the API returns a (CustomLabel) object in an array (CustomLabels). Each CustomLabel object provides the label name (Name), the level of confidence that the image contains the object (Confidence), and object location information, if it exists, for the label on the image (Geometry).  During training model calculates a threshold value that determines if a prediction for a label is true. By default, DetectCustomLabels doesn't return labels whose confidence value is below the model's calculated threshold value. To filter labels that are returned, specify a value for MinConfidence that is higher than the model's calculated threshold. You can get the model's calculated threshold from the model's training results shown in the Amazon Rekognition Custom Labels console. To get all labels, regardless of confidence, specify a MinConfidence value of 0.  You can also add the MaxResults parameter to limit the number of labels returned.  This is a stateless API operation. That is, the operation does not persist any data. This operation requires permissions to perform the rekognition:DetectCustomLabels action. 
+   * Detects custom labels in a supplied image by using an Amazon Rekognition Custom Labels model.  You specify which version of a model version to use by using the ProjectVersionArn input parameter.  You pass the input image as base64-encoded image bytes or as a reference to an image in an Amazon S3 bucket. If you use the AWS CLI to call Amazon Rekognition operations, passing image bytes is not supported. The image must be either a PNG or JPEG formatted file.   For each object that the model version detects on an image, the API returns a (CustomLabel) object in an array (CustomLabels). Each CustomLabel object provides the label name (Name), the level of confidence that the image contains the object (Confidence), and object location information, if it exists, for the label on the image (Geometry).  To filter labels that are returned, specify a value for MinConfidence. DetectCustomLabelsLabels only returns labels with a confidence that's higher than the specified value. The value of MinConfidence maps to the assumed threshold values created during training. For more information, see Assumed threshold in the Amazon Rekognition Custom Labels Developer Guide. Amazon Rekognition Custom Labels metrics expresses an assumed threshold as a floating point value between 0-1. The range of MinConfidence normalizes the threshold value to a percentage value (0-100). Confidence responses from DetectCustomLabels are also returned as a percentage. You can use MinConfidence to change the precision and recall or your model. For more information, see Analyzing an image in the Amazon Rekognition Custom Labels Developer Guide.  If you don't specify a value for MinConfidence, DetectCustomLabels returns labels based on the assumed threshold of each label. This is a stateless API operation. That is, the operation does not persist any data. This operation requires permissions to perform the rekognition:DetectCustomLabels action.  For more information, see Analyzing an image in the Amazon Rekognition Custom Labels Developer Guide. 
    */
   detectCustomLabels(callback?: (err: AWSError, data: Rekognition.Types.DetectCustomLabelsResponse) => void): Request<Rekognition.Types.DetectCustomLabelsResponse, AWSError>;
   /**
@@ -173,11 +173,11 @@ declare class Rekognition extends Service {
    */
   detectText(callback?: (err: AWSError, data: Rekognition.Types.DetectTextResponse) => void): Request<Rekognition.Types.DetectTextResponse, AWSError>;
   /**
-   * Gets the name and additional information about a celebrity based on his or her Amazon Rekognition ID. The additional information is returned as an array of URLs. If there is no additional information about the celebrity, this list is empty. For more information, see Recognizing Celebrities in an Image in the Amazon Rekognition Developer Guide. This operation requires permissions to perform the rekognition:GetCelebrityInfo action. 
+   * Gets the name and additional information about a celebrity based on their Amazon Rekognition ID. The additional information is returned as an array of URLs. If there is no additional information about the celebrity, this list is empty. For more information, see Recognizing Celebrities in an Image in the Amazon Rekognition Developer Guide. This operation requires permissions to perform the rekognition:GetCelebrityInfo action. 
    */
   getCelebrityInfo(params: Rekognition.Types.GetCelebrityInfoRequest, callback?: (err: AWSError, data: Rekognition.Types.GetCelebrityInfoResponse) => void): Request<Rekognition.Types.GetCelebrityInfoResponse, AWSError>;
   /**
-   * Gets the name and additional information about a celebrity based on his or her Amazon Rekognition ID. The additional information is returned as an array of URLs. If there is no additional information about the celebrity, this list is empty. For more information, see Recognizing Celebrities in an Image in the Amazon Rekognition Developer Guide. This operation requires permissions to perform the rekognition:GetCelebrityInfo action. 
+   * Gets the name and additional information about a celebrity based on their Amazon Rekognition ID. The additional information is returned as an array of URLs. If there is no additional information about the celebrity, this list is empty. For more information, see Recognizing Celebrities in an Image in the Amazon Rekognition Developer Guide. This operation requires permissions to perform the rekognition:GetCelebrityInfo action. 
    */
   getCelebrityInfo(callback?: (err: AWSError, data: Rekognition.Types.GetCelebrityInfoResponse) => void): Request<Rekognition.Types.GetCelebrityInfoResponse, AWSError>;
   /**
@@ -537,6 +537,7 @@ declare namespace Rekognition {
      * The confidence, in percentage, that Amazon Rekognition has that the recognized face is the celebrity.
      */
     MatchConfidence?: Percent;
+    KnownGender?: KnownGender;
   }
   export interface CelebrityDetail {
     /**
@@ -653,6 +654,14 @@ declare namespace Rekognition {
      * Identifies face image brightness and sharpness. 
      */
     Quality?: ImageQuality;
+    /**
+     *  The emotions that appear to be expressed on the face, and the confidence level in the determination. Valid values include "Happy", "Sad", "Angry", "Confused", "Disgusted", "Surprised", "Calm", "Unknown", and "Fear". 
+     */
+    Emotions?: Emotions;
+    /**
+     *  Indicates whether or not the face is smiling, and the confidence level in the determination. 
+     */
+    Smile?: Smile;
   }
   export type ComparedFaceList = ComparedFace[];
   export interface ComparedSourceImageFace {
@@ -1001,7 +1010,7 @@ declare namespace Rekognition {
      */
     MaxResults?: UInteger;
     /**
-     * Specifies the minimum confidence level for the labels to return. Amazon Rekognition doesn't return any labels with a confidence lower than this specified value. If you specify a value of 0, all labels are return, regardless of the default thresholds that the model version applies.
+     * Specifies the minimum confidence level for the labels to return. DetectCustomLabels doesn't return any labels with a confidence value that's lower than this specified value. If you specify a value of 0, DetectCustomLabels returns all labels, regardless of the assumed threshold applied to each label. If you don't specify a value for MinConfidence, DetectCustomLabels returns labels based on the assumed threshold of each label.
      */
     MinConfidence?: Percent;
   }
@@ -1387,6 +1396,10 @@ declare namespace Rekognition {
      * The name of the celebrity.
      */
     Name?: String;
+    /**
+     * Retrieves the known gender for the celebrity.
+     */
+    KnownGender?: KnownGender;
   }
   export interface GetCelebrityRecognitionRequest {
     /**
@@ -1850,6 +1863,13 @@ declare namespace Rekognition {
     Arn?: KinesisVideoArn;
   }
   export type KmsKeyId = string;
+  export interface KnownGender {
+    /**
+     * A string value of the KnownGender info about the Celebrity.
+     */
+    Type?: KnownGenderType;
+  }
+  export type KnownGenderType = "Male"|"Female"|string;
   export interface Label {
     /**
      * The name (label) of the object or scene.
@@ -2267,7 +2287,7 @@ declare namespace Rekognition {
   }
   export interface RecognizeCelebritiesResponse {
     /**
-     * Details about each celebrity found in the image. Amazon Rekognition can detect a maximum of 64 celebrities in an image.
+     * Details about each celebrity found in the image. Amazon Rekognition can detect a maximum of 64 celebrities in an image. Each celebrity object includes the following attributes: Face, Confidence, Emotions, Landmarks, Pose, Quality, Smile, Id, KnownGender, MatchConfidence, Name, Urls.
      */
     CelebrityFaces?: CelebrityList;
     /**
@@ -2275,7 +2295,7 @@ declare namespace Rekognition {
      */
     UnrecognizedFaces?: ComparedFaceList;
     /**
-     * The orientation of the input image (counterclockwise direction). If your application displays the image, you can use this value to correct the orientation. The bounding box coordinates returned in CelebrityFaces and UnrecognizedFaces represent face locations before the image orientation is corrected.   If the input image is in .jpeg format, it might contain exchangeable image (Exif) metadata that includes the image's orientation. If so, and the Exif metadata for the input image populates the orientation field, the value of OrientationCorrection is null. The CelebrityFaces and UnrecognizedFaces bounding box coordinates represent face locations after Exif metadata is used to correct the image orientation. Images in .png format don't contain Exif metadata.  
+     *  Support for estimating image orientation using the the OrientationCorrection field has ceased as of August 2021. Any returned values for this field included in an API response will always be NULL.  The orientation of the input image (counterclockwise direction). If your application displays the image, you can use this value to correct the orientation. The bounding box coordinates returned in CelebrityFaces and UnrecognizedFaces represent face locations before the image orientation is corrected.   If the input image is in .jpeg format, it might contain exchangeable image (Exif) metadata that includes the image's orientation. If so, and the Exif metadata for the input image populates the orientation field, the value of OrientationCorrection is null. The CelebrityFaces and UnrecognizedFaces bounding box coordinates represent face locations after Exif metadata is used to correct the image orientation. Images in .png format don't contain Exif metadata.  
      */
     OrientationCorrection?: OrientationCorrection;
   }

package/clients/s3.d.ts

@@ -370,11 +370,11 @@ declare class S3 extends S3Customizations {
    */
   getBucketWebsite(callback?: (err: AWSError, data: S3.Types.GetBucketWebsiteOutput) => void): Request<S3.Types.GetBucketWebsiteOutput, AWSError>;
   /**
-   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have permission to read object tags (permission for the s3:GetObjectVersionTagging action), the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.    You need the s3:GetObjectVersion permission to access a specific version of an object.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.    You need the s3:GetObjectVersion permission to access a specific version of an object.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(params: S3.Types.GetObjectRequest, callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
-   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have permission to read object tags (permission for the s3:GetObjectVersionTagging action), the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.    You need the s3:GetObjectVersion permission to access a specific version of an object.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
+   * Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header. An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg. To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification. To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl. If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects. Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys). Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.    Versioning  By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.    You need the s3:GetObjectVersion permission to access a specific version of an object.    If the current version of the object is a delete marker, Amazon S3 behaves as if the object was deleted and includes x-amz-delete-marker: true in the response.    For more information about versioning, see PutBucketVersioning.   Overriding Response Header Values  There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request. You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.  You must sign the request, either using an Authorization header or a presigned URL, when using these parameters. They cannot be used with an unsigned (anonymous) request.     response-content-type     response-content-language     response-expires     response-cache-control     response-content-disposition     response-content-encoding     Additional Considerations about Request Headers  If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.  If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: If-None-Match condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code. For more information about conditional requests, see RFC 7232. The following operations are related to GetObject:    ListBuckets     GetObjectAcl   
    */
   getObject(callback?: (err: AWSError, data: S3.Types.GetObjectOutput) => void): Request<S3.Types.GetObjectOutput, AWSError>;
   /**
@@ -442,11 +442,11 @@ declare class S3 extends S3Customizations {
    */
   headBucket(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
+   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
    */
   headObject(params: S3.Types.HeadObjectRequest, callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
-   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the s3:GetObject permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
+   * The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object. A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes. If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:   x-amz-server-side-encryption-customer-algorithm   x-amz-server-side-encryption-customer-key   x-amz-server-side-encryption-customer-key-MD5   For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).    Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with CMKs stored in Amazon Web Services KMS (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.    The last modified property in this case is the creation date of the object.    Request headers are limited to 8 KB in size. For more information, see Common Request Headers. Consider the following when using request headers:    Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:    If-Match condition evaluates to true, and;    If-Unmodified-Since condition evaluates to false;   Then Amazon S3 returns 200 OK and the data requested.    Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:    If-None-Match condition evaluates to false, and;    If-Modified-Since condition evaluates to true;   Then Amazon S3 returns the 304 Not Modified response code.   For more information about conditional requests, see RFC 7232.  Permissions  You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.   If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.   If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.   The following action is related to HeadObject:    GetObject   
    */
   headObject(callback?: (err: AWSError, data: S3.Types.HeadObjectOutput) => void): Request<S3.Types.HeadObjectOutput, AWSError>;
   /**
@@ -1867,7 +1867,7 @@ declare namespace S3 {
     VersionId?: ObjectVersionId;
     RequestPayer?: RequestPayer;
     /**
-     * Indicates whether S3 Object Lock should bypass Governance-mode restrictions to process this operation.
+     * Indicates whether S3 Object Lock should bypass Governance-mode restrictions to process this operation. To use this header, you must have the s3:PutBucketPublicAccessBlock permission.
      */
     BypassGovernanceRetention?: BypassGovernanceRetention;
     /**
@@ -1925,7 +1925,7 @@ declare namespace S3 {
     MFA?: MFA;
     RequestPayer?: RequestPayer;
     /**
-     * Specifies whether you want to delete this object even if it has a Governance-type Object Lock in place. You must have sufficient permissions to perform this operation.
+     * Specifies whether you want to delete this object even if it has a Governance-type Object Lock in place. To use this header, you must have the s3:PutBucketPublicAccessBlock permission.
      */
     BypassGovernanceRetention?: BypassGovernanceRetention;
     /**