aws-sdk 2.950.0 → 2.954.0

package/clients/ec2.d.ts

@@ -93,19 +93,19 @@ declare class EC2 extends Service {
    */
   applySecurityGroupsToClientVpnTargetNetwork(callback?: (err: AWSError, data: EC2.Types.ApplySecurityGroupsToClientVpnTargetNetworkResult) => void): Request<EC2.Types.ApplySecurityGroupsToClientVpnTargetNetworkResult, AWSError>;
   /**
-   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.
+   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.  You can optionally use Prefix Delegation on the network interface. You must specify either the IPV6 Prefix Delegation prefixes, or the IPv6 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignIpv6Addresses(params: EC2.Types.AssignIpv6AddressesRequest, callback?: (err: AWSError, data: EC2.Types.AssignIpv6AddressesResult) => void): Request<EC2.Types.AssignIpv6AddressesResult, AWSError>;
   /**
-   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.
+   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.  You can optionally use Prefix Delegation on the network interface. You must specify either the IPV6 Prefix Delegation prefixes, or the IPv6 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignIpv6Addresses(callback?: (err: AWSError, data: EC2.Types.AssignIpv6AddressesResult) => void): Request<EC2.Types.AssignIpv6AddressesResult, AWSError>;
   /**
-   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request.
+   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request. You can optionally use Prefix Delegation on the network interface. You must specify either the IPv4 Prefix Delegation prefixes, or the IPv4 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignPrivateIpAddresses(params: EC2.Types.AssignPrivateIpAddressesRequest, callback?: (err: AWSError, data: EC2.Types.AssignPrivateIpAddressesResult) => void): Request<EC2.Types.AssignPrivateIpAddressesResult, AWSError>;
   /**
-   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request.
+   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request. You can optionally use Prefix Delegation on the network interface. You must specify either the IPv4 Prefix Delegation prefixes, or the IPv4 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignPrivateIpAddresses(callback?: (err: AWSError, data: EC2.Types.AssignPrivateIpAddressesResult) => void): Request<EC2.Types.AssignPrivateIpAddressesResult, AWSError>;
   /**
@@ -125,11 +125,11 @@ declare class EC2 extends Service {
    */
   associateClientVpnTargetNetwork(callback?: (err: AWSError, data: EC2.Types.AssociateClientVpnTargetNetworkResult) => void): Request<EC2.Types.AssociateClientVpnTargetNetworkResult, AWSError>;
   /**
-   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   associateDhcpOptions(params: EC2.Types.AssociateDhcpOptionsRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   associateDhcpOptions(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -157,11 +157,11 @@ declare class EC2 extends Service {
    */
   associateInstanceEventWindow(callback?: (err: AWSError, data: EC2.Types.AssociateInstanceEventWindowResult) => void): Request<EC2.Types.AssociateInstanceEventWindowResult, AWSError>;
   /**
-   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   associateRouteTable(params: EC2.Types.AssociateRouteTableRequest, callback?: (err: AWSError, data: EC2.Types.AssociateRouteTableResult) => void): Request<EC2.Types.AssociateRouteTableResult, AWSError>;
   /**
-   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   associateRouteTable(callback?: (err: AWSError, data: EC2.Types.AssociateRouteTableResult) => void): Request<EC2.Types.AssociateRouteTableResult, AWSError>;
   /**
@@ -197,11 +197,11 @@ declare class EC2 extends Service {
    */
   associateTrunkInterface(callback?: (err: AWSError, data: EC2.Types.AssociateTrunkInterfaceResult) => void): Request<EC2.Types.AssociateTrunkInterfaceResult, AWSError>;
   /**
-   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and Subnet Sizing in the Amazon Virtual Private Cloud User Guide.
+   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and subnet sizing in the Amazon Virtual Private Cloud User Guide.
    */
   associateVpcCidrBlock(params: EC2.Types.AssociateVpcCidrBlockRequest, callback?: (err: AWSError, data: EC2.Types.AssociateVpcCidrBlockResult) => void): Request<EC2.Types.AssociateVpcCidrBlockResult, AWSError>;
   /**
-   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and Subnet Sizing in the Amazon Virtual Private Cloud User Guide.
+   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and subnet sizing in the Amazon Virtual Private Cloud User Guide.
    */
   associateVpcCidrBlock(callback?: (err: AWSError, data: EC2.Types.AssociateVpcCidrBlockResult) => void): Request<EC2.Types.AssociateVpcCidrBlockResult, AWSError>;
   /**
@@ -381,11 +381,11 @@ declare class EC2 extends Service {
    */
   createCapacityReservation(callback?: (err: AWSError, data: EC2.Types.CreateCapacityReservationResult) => void): Request<EC2.Types.CreateCapacityReservationResult, AWSError>;
   /**
-   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the AWS Wavelength Developer Guide.
+   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the Amazon Web Services Wavelength Developer Guide.
    */
   createCarrierGateway(params: EC2.Types.CreateCarrierGatewayRequest, callback?: (err: AWSError, data: EC2.Types.CreateCarrierGatewayResult) => void): Request<EC2.Types.CreateCarrierGatewayResult, AWSError>;
   /**
-   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the AWS Wavelength Developer Guide.
+   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the Amazon Web Services Wavelength Developer Guide.
    */
   createCarrierGateway(callback?: (err: AWSError, data: EC2.Types.CreateCarrierGatewayResult) => void): Request<EC2.Types.CreateCarrierGatewayResult, AWSError>;
   /**
@@ -413,27 +413,27 @@ declare class EC2 extends Service {
    */
   createCustomerGateway(callback?: (err: AWSError, data: EC2.Types.CreateCustomerGatewayResult) => void): Request<EC2.Types.CreateCustomerGatewayResult, AWSError>;
   /**
-   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a Default Subnet in the Amazon Virtual Private Cloud User Guide.
+   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a default subnet in the Amazon Virtual Private Cloud User Guide.
    */
   createDefaultSubnet(params: EC2.Types.CreateDefaultSubnetRequest, callback?: (err: AWSError, data: EC2.Types.CreateDefaultSubnetResult) => void): Request<EC2.Types.CreateDefaultSubnetResult, AWSError>;
   /**
-   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a Default Subnet in the Amazon Virtual Private Cloud User Guide.
+   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a default subnet in the Amazon Virtual Private Cloud User Guide.
    */
   createDefaultSubnet(callback?: (err: AWSError, data: EC2.Types.CreateDefaultSubnetResult) => void): Request<EC2.Types.CreateDefaultSubnetResult, AWSError>;
   /**
-   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and Default Subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
+   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and default subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
    */
   createDefaultVpc(params: EC2.Types.CreateDefaultVpcRequest, callback?: (err: AWSError, data: EC2.Types.CreateDefaultVpcResult) => void): Request<EC2.Types.CreateDefaultVpcResult, AWSError>;
   /**
-   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and Default Subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
+   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and default subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
    */
   createDefaultVpc(callback?: (err: AWSError, data: EC2.Types.CreateDefaultVpcResult) => void): Request<EC2.Types.CreateDefaultVpcResult, AWSError>;
   /**
-   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   createDhcpOptions(params: EC2.Types.CreateDhcpOptionsRequest, callback?: (err: AWSError, data: EC2.Types.CreateDhcpOptionsResult) => void): Request<EC2.Types.CreateDhcpOptionsResult, AWSError>;
   /**
-   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   createDhcpOptions(callback?: (err: AWSError, data: EC2.Types.CreateDhcpOptionsResult) => void): Request<EC2.Types.CreateDhcpOptionsResult, AWSError>;
   /**
@@ -453,11 +453,11 @@ declare class EC2 extends Service {
    */
   createFleet(callback?: (err: AWSError, data: EC2.Types.CreateFleetResult) => void): Request<EC2.Types.CreateFleetResult, AWSError>;
   /**
-   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow Log Records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
+   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow log records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
    */
   createFlowLogs(params: EC2.Types.CreateFlowLogsRequest, callback?: (err: AWSError, data: EC2.Types.CreateFlowLogsResult) => void): Request<EC2.Types.CreateFlowLogsResult, AWSError>;
   /**
-   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow Log Records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
+   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow log records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
    */
   createFlowLogs(callback?: (err: AWSError, data: EC2.Types.CreateFlowLogsResult) => void): Request<EC2.Types.CreateFlowLogsResult, AWSError>;
   /**
@@ -549,11 +549,11 @@ declare class EC2 extends Service {
    */
   createManagedPrefixList(callback?: (err: AWSError, data: EC2.Types.CreateManagedPrefixListResult) => void): Request<EC2.Types.CreateManagedPrefixListResult, AWSError>;
   /**
-   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT Gateways in the Amazon Virtual Private Cloud User Guide.
+   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT gateways in the Amazon Virtual Private Cloud User Guide.
    */
   createNatGateway(params: EC2.Types.CreateNatGatewayRequest, callback?: (err: AWSError, data: EC2.Types.CreateNatGatewayResult) => void): Request<EC2.Types.CreateNatGatewayResult, AWSError>;
   /**
-   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT Gateways in the Amazon Virtual Private Cloud User Guide.
+   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT gateways in the Amazon Virtual Private Cloud User Guide.
    */
   createNatGateway(callback?: (err: AWSError, data: EC2.Types.CreateNatGatewayResult) => void): Request<EC2.Types.CreateNatGatewayResult, AWSError>;
   /**
@@ -629,19 +629,19 @@ declare class EC2 extends Service {
    */
   createRestoreImageTask(callback?: (err: AWSError, data: EC2.Types.CreateRestoreImageTaskResult) => void): Request<EC2.Types.CreateRestoreImageTaskResult, AWSError>;
   /**
-   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRoute(params: EC2.Types.CreateRouteRequest, callback?: (err: AWSError, data: EC2.Types.CreateRouteResult) => void): Request<EC2.Types.CreateRouteResult, AWSError>;
   /**
-   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRoute(callback?: (err: AWSError, data: EC2.Types.CreateRouteResult) => void): Request<EC2.Types.CreateRouteResult, AWSError>;
   /**
-   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRouteTable(params: EC2.Types.CreateRouteTableRequest, callback?: (err: AWSError, data: EC2.Types.CreateRouteTableResult) => void): Request<EC2.Types.CreateRouteTableResult, AWSError>;
   /**
-   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRouteTable(callback?: (err: AWSError, data: EC2.Types.CreateRouteTableResult) => void): Request<EC2.Types.CreateRouteTableResult, AWSError>;
   /**
@@ -685,13 +685,21 @@ declare class EC2 extends Service {
    */
   createStoreImageTask(callback?: (err: AWSError, data: EC2.Types.CreateStoreImageTaskResult) => void): Request<EC2.Types.CreateStoreImageTaskResult, AWSError>;
   /**
-   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   AWS reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   Amazon Web Services reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   createSubnet(params: EC2.Types.CreateSubnetRequest, callback?: (err: AWSError, data: EC2.Types.CreateSubnetResult) => void): Request<EC2.Types.CreateSubnetResult, AWSError>;
   /**
-   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   AWS reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   Amazon Web Services reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   createSubnet(callback?: (err: AWSError, data: EC2.Types.CreateSubnetResult) => void): Request<EC2.Types.CreateSubnetResult, AWSError>;
+  /**
+   * Creates a subnet CIDR reservation. For information about subnet CIDR reservations, see Subnet CIDR reservations in the Amazon Virtual Private Cloud User Guide.
+   */
+  createSubnetCidrReservation(params: EC2.Types.CreateSubnetCidrReservationRequest, callback?: (err: AWSError, data: EC2.Types.CreateSubnetCidrReservationResult) => void): Request<EC2.Types.CreateSubnetCidrReservationResult, AWSError>;
+  /**
+   * Creates a subnet CIDR reservation. For information about subnet CIDR reservations, see Subnet CIDR reservations in the Amazon Virtual Private Cloud User Guide.
+   */
+  createSubnetCidrReservation(callback?: (err: AWSError, data: EC2.Types.CreateSubnetCidrReservationResult) => void): Request<EC2.Types.CreateSubnetCidrReservationResult, AWSError>;
   /**
    * Adds or overwrites only the specified tags for the specified Amazon EC2 resource or resources. When you specify an existing tag key, the value is overwritten with the new value. Each resource can have a maximum of 50 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource. For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide. For more information about creating IAM policies that control users' access to resources based on tags, see Supported Resource-Level Permissions for Amazon EC2 API Actions in the Amazon Elastic Compute Cloud User Guide.
    */
@@ -813,11 +821,11 @@ declare class EC2 extends Service {
    */
   createVolume(callback?: (err: AWSError, data: EC2.Types.Volume) => void): Request<EC2.Types.Volume, AWSError>;
   /**
-   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
    */
   createVpc(params: EC2.Types.CreateVpcRequest, callback?: (err: AWSError, data: EC2.Types.CreateVpcResult) => void): Request<EC2.Types.CreateVpcResult, AWSError>;
   /**
-   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
    */
   createVpc(callback?: (err: AWSError, data: EC2.Types.CreateVpcResult) => void): Request<EC2.Types.CreateVpcResult, AWSError>;
   /**
@@ -845,11 +853,11 @@ declare class EC2 extends Service {
    */
   createVpcEndpointServiceConfiguration(callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointServiceConfigurationResult) => void): Request<EC2.Types.CreateVpcEndpointServiceConfigurationResult, AWSError>;
   /**
-   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another AWS account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
+   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
    */
   createVpcPeeringConnection(params: EC2.Types.CreateVpcPeeringConnectionRequest, callback?: (err: AWSError, data: EC2.Types.CreateVpcPeeringConnectionResult) => void): Request<EC2.Types.CreateVpcPeeringConnectionResult, AWSError>;
   /**
-   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another AWS account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
+   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
    */
   createVpcPeeringConnection(callback?: (err: AWSError, data: EC2.Types.CreateVpcPeeringConnectionResult) => void): Request<EC2.Types.CreateVpcPeeringConnectionResult, AWSError>;
   /**
@@ -1132,6 +1140,14 @@ declare class EC2 extends Service {
    * Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.
    */
   deleteSubnet(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
+  /**
+   * Deletes a subnet CIDR reservation.
+   */
+  deleteSubnetCidrReservation(params: EC2.Types.DeleteSubnetCidrReservationRequest, callback?: (err: AWSError, data: EC2.Types.DeleteSubnetCidrReservationResult) => void): Request<EC2.Types.DeleteSubnetCidrReservationResult, AWSError>;
+  /**
+   * Deletes a subnet CIDR reservation.
+   */
+  deleteSubnetCidrReservation(callback?: (err: AWSError, data: EC2.Types.DeleteSubnetCidrReservationResult) => void): Request<EC2.Types.DeleteSubnetCidrReservationResult, AWSError>;
   /**
    * Deletes the specified set of tags from the specified set of resources. To list the current tags, use DescribeTags. For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide.
    */
@@ -1501,11 +1517,11 @@ declare class EC2 extends Service {
    */
   describeCustomerGateways(callback?: (err: AWSError, data: EC2.Types.DescribeCustomerGatewaysResult) => void): Request<EC2.Types.DescribeCustomerGatewaysResult, AWSError>;
   /**
-   * Describes one or more of your DHCP options sets. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your DHCP options sets. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   describeDhcpOptions(params: EC2.Types.DescribeDhcpOptionsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeDhcpOptionsResult) => void): Request<EC2.Types.DescribeDhcpOptionsResult, AWSError>;
   /**
-   * Describes one or more of your DHCP options sets. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your DHCP options sets. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   describeDhcpOptions(callback?: (err: AWSError, data: EC2.Types.DescribeDhcpOptionsResult) => void): Request<EC2.Types.DescribeDhcpOptionsResult, AWSError>;
   /**
@@ -1981,11 +1997,11 @@ declare class EC2 extends Service {
    */
   describeReservedInstancesOfferings(callback?: (err: AWSError, data: EC2.Types.DescribeReservedInstancesOfferingsResult) => void): Request<EC2.Types.DescribeReservedInstancesOfferingsResult, AWSError>;
   /**
-   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   describeRouteTables(params: EC2.Types.DescribeRouteTablesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeRouteTablesResult) => void): Request<EC2.Types.DescribeRouteTablesResult, AWSError>;
   /**
-   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   describeRouteTables(callback?: (err: AWSError, data: EC2.Types.DescribeRouteTablesResult) => void): Request<EC2.Types.DescribeRouteTablesResult, AWSError>;
   /**
@@ -2109,11 +2125,11 @@ declare class EC2 extends Service {
    */
   describeStoreImageTasks(callback?: (err: AWSError, data: EC2.Types.DescribeStoreImageTasksResult) => void): Request<EC2.Types.DescribeStoreImageTasksResult, AWSError>;
   /**
-   * Describes one or more of your subnets. For more information, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your subnets. For more information, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   describeSubnets(params: EC2.Types.DescribeSubnetsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeSubnetsResult) => void): Request<EC2.Types.DescribeSubnetsResult, AWSError>;
   /**
-   * Describes one or more of your subnets. For more information, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your subnets. For more information, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   describeSubnets(callback?: (err: AWSError, data: EC2.Types.DescribeSubnetsResult) => void): Request<EC2.Types.DescribeSubnetsResult, AWSError>;
   /**
@@ -2501,11 +2517,11 @@ declare class EC2 extends Service {
    */
   disassociateInstanceEventWindow(callback?: (err: AWSError, data: EC2.Types.DisassociateInstanceEventWindowResult) => void): Request<EC2.Types.DisassociateInstanceEventWindowResult, AWSError>;
   /**
-   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   disassociateRouteTable(params: EC2.Types.DisassociateRouteTableRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   disassociateRouteTable(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -2796,6 +2812,14 @@ declare class EC2 extends Service {
    * Retrieves the access status of your account to the EC2 serial console of all instances. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account access to the EC2 serial console in the Amazon EC2 User Guide.
    */
   getSerialConsoleAccessStatus(callback?: (err: AWSError, data: EC2.Types.GetSerialConsoleAccessStatusResult) => void): Request<EC2.Types.GetSerialConsoleAccessStatusResult, AWSError>;
+  /**
+   * Gets information about the subnet CIDR reservations.
+   */
+  getSubnetCidrReservations(params: EC2.Types.GetSubnetCidrReservationsRequest, callback?: (err: AWSError, data: EC2.Types.GetSubnetCidrReservationsResult) => void): Request<EC2.Types.GetSubnetCidrReservationsResult, AWSError>;
+  /**
+   * Gets information about the subnet CIDR reservations.
+   */
+  getSubnetCidrReservations(callback?: (err: AWSError, data: EC2.Types.GetSubnetCidrReservationsResult) => void): Request<EC2.Types.GetSubnetCidrReservationsResult, AWSError>;
   /**
    * Lists the route tables to which the specified resource attachment propagates routes.
    */
@@ -3205,11 +3229,11 @@ declare class EC2 extends Service {
    */
   modifyVpcEndpointServicePermissions(callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointServicePermissionsResult) => void): Request<EC2.Types.ModifyVpcEndpointServicePermissionsResult, AWSError>;
   /**
-   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same AWS account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different AWS accounts or different Regions. For peered VPCs in different AWS accounts, each AWS account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
+   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different different accounts or different Regions. For peered VPCs in different accounts, each account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
    */
   modifyVpcPeeringConnectionOptions(params: EC2.Types.ModifyVpcPeeringConnectionOptionsRequest, callback?: (err: AWSError, data: EC2.Types.ModifyVpcPeeringConnectionOptionsResult) => void): Request<EC2.Types.ModifyVpcPeeringConnectionOptionsResult, AWSError>;
   /**
-   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same AWS account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different AWS accounts or different Regions. For peered VPCs in different AWS accounts, each AWS account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
+   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different different accounts or different Regions. For peered VPCs in different accounts, each account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
    */
   modifyVpcPeeringConnectionOptions(callback?: (err: AWSError, data: EC2.Types.ModifyVpcPeeringConnectionOptionsResult) => void): Request<EC2.Types.ModifyVpcPeeringConnectionOptionsResult, AWSError>;
   /**
@@ -3421,19 +3445,19 @@ declare class EC2 extends Service {
    */
   replaceNetworkAclEntry(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   replaceRoute(params: EC2.Types.ReplaceRouteRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   replaceRoute(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
+   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
    */
   replaceRouteTableAssociation(params: EC2.Types.ReplaceRouteTableAssociationRequest, callback?: (err: AWSError, data: EC2.Types.ReplaceRouteTableAssociationResult) => void): Request<EC2.Types.ReplaceRouteTableAssociationResult, AWSError>;
   /**
-   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
+   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
    */
   replaceRouteTableAssociation(callback?: (err: AWSError, data: EC2.Types.ReplaceRouteTableAssociationResult) => void): Request<EC2.Types.ReplaceRouteTableAssociationResult, AWSError>;
   /**
@@ -3661,19 +3685,19 @@ declare class EC2 extends Service {
    */
   terminateInstances(callback?: (err: AWSError, data: EC2.Types.TerminateInstancesResult) => void): Request<EC2.Types.TerminateInstancesResult, AWSError>;
   /**
-   * Unassigns one or more IPv6 addresses from a network interface.
+   * Unassigns one or more IPv6 addresses IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignIpv6Addresses(params: EC2.Types.UnassignIpv6AddressesRequest, callback?: (err: AWSError, data: EC2.Types.UnassignIpv6AddressesResult) => void): Request<EC2.Types.UnassignIpv6AddressesResult, AWSError>;
   /**
-   * Unassigns one or more IPv6 addresses from a network interface.
+   * Unassigns one or more IPv6 addresses IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignIpv6Addresses(callback?: (err: AWSError, data: EC2.Types.UnassignIpv6AddressesResult) => void): Request<EC2.Types.UnassignIpv6AddressesResult, AWSError>;
   /**
-   * Unassigns one or more secondary private IP addresses from a network interface.
+   * Unassigns one or more secondary private IP addresses, or IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignPrivateIpAddresses(params: EC2.Types.UnassignPrivateIpAddressesRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Unassigns one or more secondary private IP addresses from a network interface.
+   * Unassigns one or more secondary private IP addresses, or IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignPrivateIpAddresses(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -4448,7 +4472,7 @@ declare namespace EC2 {
      */
     DestinationCidr?: String;
     /**
-     * The prefix of the AWS service.
+     * The prefix of the Amazon Web Service.
      */
     DestinationPrefixListId?: String;
     /**
@@ -4549,6 +4573,14 @@ declare namespace EC2 {
      * One or more specific IPv6 addresses to be assigned to the network interface. You can't use this option if you're specifying a number of IPv6 addresses.
      */
     Ipv6Addresses?: Ipv6AddressList;
+    /**
+     * The number of IPv6 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
+     */
+    Ipv6PrefixCount?: Integer;
+    /**
+     * One or more IPv6 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: IpPrefixList;
     /**
      * The ID of the network interface.
      */
@@ -4559,6 +4591,10 @@ declare namespace EC2 {
      * The new IPv6 addresses assigned to the network interface. Existing IPv6 addresses that were assigned to the network interface before the request are not included.
      */
     AssignedIpv6Addresses?: Ipv6AddressList;
+    /**
+     * The IPv6 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    AssignedIpv6Prefixes?: IpPrefixList;
     /**
      * The ID of the network interface.
      */
@@ -4581,6 +4617,14 @@ declare namespace EC2 {
      * The number of secondary IP addresses to assign to the network interface. You can't specify this parameter when also specifying private IP addresses.
      */
     SecondaryPrivateIpAddressCount?: Integer;
+    /**
+     * One or more IPv4 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: IpPrefixList;
+    /**
+     * The number of IPv4 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv4 Prefixes option.
+     */
+    Ipv4PrefixCount?: Integer;
   }
   export interface AssignPrivateIpAddressesResult {
     /**
@@ -4591,6 +4635,10 @@ declare namespace EC2 {
      * The private IP addresses assigned to the network interface.
      */
     AssignedPrivateIpAddresses?: AssignedPrivateIpAddressList;
+    /**
+     * The IPv4 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    AssignedIpv4Prefixes?: Ipv4PrefixesList;
   }
   export interface AssignedPrivateIpAddress {
     /**
@@ -5806,7 +5854,7 @@ declare namespace EC2 {
      */
     State?: CarrierGatewayState;
     /**
-     * The AWS account ID of the owner of the carrier gateway.
+     * The account ID of the owner of the carrier gateway.
      */
     OwnerId?: String;
     /**
@@ -6618,7 +6666,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
   }
@@ -6826,7 +6874,7 @@ declare namespace EC2 {
   }
   export interface CreateEgressOnlyInternetGatewayRequest {
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
     /**
@@ -6972,7 +7020,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
     /**
@@ -7004,7 +7052,7 @@ declare namespace EC2 {
      */
     LogDestination?: String;
     /**
-     * The fields to include in the flow log record, in the order in which they should appear. For a list of available fields, see Flow Log Records. If you omit this parameter, the flow log is created using the default format. If you specify this parameter, you must specify at least one field. Specify the fields using the ${field-id} format, separated by spaces. For the AWS CLI, use single quotation marks (' ') to surround the parameter value.
+     * The fields to include in the flow log record, in the order in which they should appear. For a list of available fields, see Flow log records. If you omit this parameter, the flow log is created using the default format. If you specify this parameter, you must specify at least one field. Specify the fields using the ${field-id} format, separated by spaces. For the CLI, use single quotation marks (' ') to surround the parameter value.
      */
     LogFormat?: String;
     /**
@@ -7358,7 +7406,7 @@ declare namespace EC2 {
      */
     AllocationId?: AllocationId;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency. Constraint: Maximum 64 ASCII characters.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency. Constraint: Maximum 64 ASCII characters.
      */
     ClientToken?: String;
     /**
@@ -7452,19 +7500,19 @@ declare namespace EC2 {
   }
   export interface CreateNetworkInsightsPathRequest {
     /**
-     * The IP address of the AWS resource that is the source of the path.
+     * The IP address of the Amazon Web Services resource that is the source of the path.
      */
     SourceIp?: IpAddress;
     /**
-     * The IP address of the AWS resource that is the destination of the path.
+     * The IP address of the Amazon Web Services resource that is the destination of the path.
      */
     DestinationIp?: IpAddress;
     /**
-     * The AWS resource that is the source of the path.
+     * The Amazon Web Services resource that is the source of the path.
      */
     Source: String;
     /**
-     * The AWS resource that is the destination of the path.
+     * The Amazon Web Services resource that is the destination of the path.
      */
     Destination: String;
     /**
@@ -7484,7 +7532,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken: String;
   }
@@ -7555,6 +7603,22 @@ declare namespace EC2 {
      * The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet's IPv4 CIDR range. You can't specify this option and specify more than one private IP address using privateIpAddresses. The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide.
      */
     SecondaryPrivateIpAddressCount?: Integer;
+    /**
+     * One or moreIPv4 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: Ipv4PrefixList;
+    /**
+     * The number of IPv4 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv4 Prefixes option.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or moreIPv6 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: Ipv6PrefixList;
+    /**
+     * The number of IPv6 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
+     */
+    Ipv6PrefixCount?: Integer;
     /**
      * Indicates the type of network interface. To create an Elastic Fabric Adapter (EFA), specify efa. For more information, see  Elastic Fabric Adapter in the Amazon Elastic Compute Cloud User Guide. To create a trunk network interface, specify efa. For more information, see  Network interface trunking in the Amazon Elastic Compute Cloud User Guide.
      */
@@ -7905,23 +7969,51 @@ declare namespace EC2 {
      */
     ObjectKey?: String;
   }
+  export interface CreateSubnetCidrReservationRequest {
+    /**
+     * The tags to assign to the subnet CIDR reservation.
+     */
+    TagSpecifications?: TagSpecificationList;
+    /**
+     * The ID of the subnet.
+     */
+    SubnetId: SubnetId;
+    /**
+     * The IPv4 or IPV6 CIDR range to reserve.
+     */
+    Cidr: String;
+    /**
+     * The type of reservation. The following are valid values:    prefix: The Amazon EC2 Prefix Delegation feature assigns the IP addresses to network interfaces that are associated with an instance. For information about Prefix Delegation, see Prefix Delegation for Amazon EC2 network interfaces in the Amazon Elastic Compute Cloud User Guide.    explicit: You manually assign the IP addresses to resources that reside in your subnet.   
+     */
+    ReservationType: SubnetCidrReservationType;
+    /**
+     * The description to assign to the subnet CIDR reservation.
+     */
+    Description?: String;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface CreateSubnetCidrReservationResult {
+    /**
+     * Information about the created subnet CIDR reservation.
+     */
+    SubnetCidrReservation?: SubnetCidrReservation;
+  }
   export interface CreateSubnetRequest {
     /**
      * The tags to assign to the subnet.
      */
     TagSpecifications?: TagSpecificationList;
     /**
-     * The Availability Zone or Local Zone for the subnet. Default: AWS selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet. To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Available Regions in the Amazon Elastic Compute Cloud User Guide. To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.
+     * The Availability Zone or Local Zone for the subnet. Default: Amazon Web Services selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet. To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Available Regions in the Amazon Elastic Compute Cloud User Guide. To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.
      */
     AvailabilityZone?: String;
     /**
      * The AZ ID or the Local Zone ID of the subnet.
      */
     AvailabilityZoneId?: String;
-    /**
-     * The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.
-     */
-    CidrBlock: String;
     /**
      * The IPv6 network range for the subnet, in CIDR notation. The subnet size must use a /64 prefix length.
      */
@@ -7938,6 +8030,10 @@ declare namespace EC2 {
      * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
      */
     DryRun?: Boolean;
+    /**
+     * The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.
+     */
+    CidrBlock: String;
   }
   export interface CreateSubnetResult {
     /**
@@ -8630,7 +8726,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The AWS account ID of the owner of the accepter VPC. Default: Your AWS account ID
+     * The account ID of the owner of the accepter VPC. Default: Your account ID
      */
     PeerOwnerId?: String;
     /**
@@ -9406,6 +9502,22 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
   }
+  export interface DeleteSubnetCidrReservationRequest {
+    /**
+     * The ID of the subnet CIDR reservation.
+     */
+    SubnetCidrReservationId: SubnetCidrReservationId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface DeleteSubnetCidrReservationResult {
+    /**
+     * Information about the deleted subnet CIDR reservation.
+     */
+    DeletedSubnetCidrReservation?: SubnetCidrReservation;
+  }
   export interface DeleteSubnetRequest {
     /**
      * The ID of the subnet.
@@ -10060,7 +10172,7 @@ declare namespace EC2 {
      */
     CarrierGatewayIds?: CarrierGatewayIdSet;
     /**
-     * One or more filters.    carrier-gateway-id - The ID of the carrier gateway.    state - The state of the carrier gateway (pending | failed | available | deleting | deleted).    owner-id - The AWS account ID of the owner of the carrier gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC associated with the carrier gateway.  
+     * One or more filters.    carrier-gateway-id - The ID of the carrier gateway.    state - The state of the carrier gateway (pending | failed | available | deleting | deleted).    owner-id - The account ID of the owner of the carrier gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC associated with the carrier gateway.  
      */
     Filters?: FilterList;
     /**
@@ -10364,7 +10476,7 @@ declare namespace EC2 {
      */
     DhcpOptionsIds?: DhcpOptionsIdStringList;
     /**
-     * One or more filters.    dhcp-options-id - The ID of a DHCP options set.    key - The key for one of the options (for example, domain-name).    value - The value for one of the options.    owner-id - The ID of the AWS account that owns the DHCP options set.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    dhcp-options-id - The ID of a DHCP options set.    key - The key for one of the options (for example, domain-name).    value - The value for one of the options.    owner-id - The ID of the account that owns the DHCP options set.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -11318,7 +11430,7 @@ declare namespace EC2 {
   export type DescribeInternetGatewaysMaxResults = number;
   export interface DescribeInternetGatewaysRequest {
     /**
-     * One or more filters.    attachment.state - The current state of the attachment between the gateway and the VPC (available). Present only if a VPC is attached.    attachment.vpc-id - The ID of an attached VPC.    internet-gateway-id - The ID of the Internet gateway.    owner-id - The ID of the AWS account that owns the internet gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    attachment.state - The current state of the attachment between the gateway and the VPC (available). Present only if a VPC is attached.    attachment.vpc-id - The ID of an attached VPC.    internet-gateway-id - The ID of the Internet gateway.    owner-id - The ID of the account that owns the internet gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -11782,7 +11894,7 @@ declare namespace EC2 {
   export type DescribeNetworkAclsMaxResults = number;
   export interface DescribeNetworkAclsRequest {
     /**
-     * One or more filters.    association.association-id - The ID of an association ID for the ACL.    association.network-acl-id - The ID of the network ACL involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    default - Indicates whether the ACL is the default network ACL for the VPC.    entry.cidr - The IPv4 CIDR range specified in the entry.    entry.icmp.code - The ICMP code specified in the entry, if any.    entry.icmp.type - The ICMP type specified in the entry, if any.    entry.ipv6-cidr - The IPv6 CIDR range specified in the entry.    entry.port-range.from - The start of the port range specified in the entry.     entry.port-range.to - The end of the port range specified in the entry.     entry.protocol - The protocol specified in the entry (tcp | udp | icmp or a protocol number).    entry.rule-action - Allows or denies the matching traffic (allow | deny).    entry.rule-number - The number of an entry (in other words, rule) in the set of ACL entries.    network-acl-id - The ID of the network ACL.    owner-id - The ID of the AWS account that owns the network ACL.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the network ACL.  
+     * One or more filters.    association.association-id - The ID of an association ID for the ACL.    association.network-acl-id - The ID of the network ACL involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    default - Indicates whether the ACL is the default network ACL for the VPC.    entry.cidr - The IPv4 CIDR range specified in the entry.    entry.icmp.code - The ICMP code specified in the entry, if any.    entry.icmp.type - The ICMP type specified in the entry, if any.    entry.ipv6-cidr - The IPv6 CIDR range specified in the entry.    entry.port-range.from - The start of the port range specified in the entry.     entry.port-range.to - The end of the port range specified in the entry.     entry.protocol - The protocol specified in the entry (tcp | udp | icmp or a protocol number).    entry.rule-action - Allows or denies the matching traffic (allow | deny).    entry.rule-number - The number of an entry (in other words, rule) in the set of ACL entries.    network-acl-id - The ID of the network ACL.    owner-id - The ID of the account that owns the network ACL.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the network ACL.  
      */
     Filters?: FilterList;
     /**
@@ -12303,7 +12415,7 @@ declare namespace EC2 {
   export type DescribeRouteTablesMaxResults = number;
   export interface DescribeRouteTablesRequest {
     /**
-     * One or more filters.    association.route-table-association-id - The ID of an association ID for the route table.    association.route-table-id - The ID of the route table involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    association.main - Indicates whether the route table is the main route table for the VPC (true | false). Route tables that do not have an association ID are not returned in the response.    owner-id - The ID of the AWS account that owns the route table.    route-table-id - The ID of the route table.    route.destination-cidr-block - The IPv4 CIDR range specified in a route in the table.    route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in a route in the route table.    route.destination-prefix-list-id - The ID (prefix) of the AWS service specified in a route in the table.    route.egress-only-internet-gateway-id - The ID of an egress-only Internet gateway specified in a route in the route table.    route.gateway-id - The ID of a gateway specified in a route in the table.    route.instance-id - The ID of an instance specified in a route in the table.    route.nat-gateway-id - The ID of a NAT gateway.    route.transit-gateway-id - The ID of a transit gateway.    route.origin - Describes how the route was created. CreateRouteTable indicates that the route was automatically created when the route table was created; CreateRoute indicates that the route was manually added to the route table; EnableVgwRoutePropagation indicates that the route was propagated by route propagation.    route.state - The state of a route in the route table (active | blackhole). The blackhole state indicates that the route's target isn't available (for example, the specified gateway isn't attached to the VPC, the specified NAT instance has been terminated, and so on).    route.vpc-peering-connection-id - The ID of a VPC peering connection specified in a route in the table.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the route table.  
+     * One or more filters.    association.route-table-association-id - The ID of an association ID for the route table.    association.route-table-id - The ID of the route table involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    association.main - Indicates whether the route table is the main route table for the VPC (true | false). Route tables that do not have an association ID are not returned in the response.    owner-id - The ID of the account that owns the route table.    route-table-id - The ID of the route table.    route.destination-cidr-block - The IPv4 CIDR range specified in a route in the table.    route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in a route in the route table.    route.destination-prefix-list-id - The ID (prefix) of the Amazon Web Service specified in a route in the table.    route.egress-only-internet-gateway-id - The ID of an egress-only Internet gateway specified in a route in the route table.    route.gateway-id - The ID of a gateway specified in a route in the table.    route.instance-id - The ID of an instance specified in a route in the table.    route.nat-gateway-id - The ID of a NAT gateway.    route.transit-gateway-id - The ID of a transit gateway.    route.origin - Describes how the route was created. CreateRouteTable indicates that the route was automatically created when the route table was created; CreateRoute indicates that the route was manually added to the route table; EnableVgwRoutePropagation indicates that the route was propagated by route propagation.    route.state - The state of a route in the route table (active | blackhole). The blackhole state indicates that the route's target isn't available (for example, the specified gateway isn't attached to the VPC, the specified NAT instance has been terminated, and so on).    route.vpc-peering-connection-id - The ID of a VPC peering connection specified in a route in the table.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the route table.  
      */
     Filters?: FilterList;
     /**
@@ -12836,7 +12948,7 @@ declare namespace EC2 {
   export type DescribeSubnetsMaxResults = number;
   export interface DescribeSubnetsRequest {
     /**
-     * One or more filters.    availability-zone - The Availability Zone for the subnet. You can also use availabilityZone as the filter name.    availability-zone-id - The ID of the Availability Zone for the subnet. You can also use availabilityZoneId as the filter name.    available-ip-address-count - The number of IPv4 addresses in the subnet that are available.    cidr-block - The IPv4 CIDR block of the subnet. The CIDR block you specify must exactly match the subnet's CIDR block for information to be returned for the subnet. You can also use cidr or cidrBlock as the filter names.    default-for-az - Indicates whether this is the default subnet for the Availability Zone. You can also use defaultForAz as the filter name.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.association-id - An association ID for an IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the subnet.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The ID of the AWS account that owns the subnet.    state - The state of the subnet (pending | available).    subnet-arn - The Amazon Resource Name (ARN) of the subnet.    subnet-id - The ID of the subnet.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the subnet.  
+     * One or more filters.    availability-zone - The Availability Zone for the subnet. You can also use availabilityZone as the filter name.    availability-zone-id - The ID of the Availability Zone for the subnet. You can also use availabilityZoneId as the filter name.    available-ip-address-count - The number of IPv4 addresses in the subnet that are available.    cidr-block - The IPv4 CIDR block of the subnet. The CIDR block you specify must exactly match the subnet's CIDR block for information to be returned for the subnet. You can also use cidr or cidrBlock as the filter names.    default-for-az - Indicates whether this is the default subnet for the Availability Zone. You can also use defaultForAz as the filter name.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.association-id - An association ID for an IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the subnet.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The ID of the account that owns the subnet.    state - The state of the subnet (pending | available).    subnet-arn - The Amazon Resource Name (ARN) of the subnet.    subnet-id - The ID of the subnet.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the subnet.  
      */
     Filters?: FilterList;
     /**
@@ -13672,7 +13784,7 @@ declare namespace EC2 {
   export type DescribeVpcPeeringConnectionsMaxResults = number;
   export interface DescribeVpcPeeringConnectionsRequest {
     /**
-     * One or more filters.    accepter-vpc-info.cidr-block - The IPv4 CIDR block of the accepter VPC.    accepter-vpc-info.owner-id - The AWS account ID of the owner of the accepter VPC.    accepter-vpc-info.vpc-id - The ID of the accepter VPC.    expiration-time - The expiration date and time for the VPC peering connection.    requester-vpc-info.cidr-block - The IPv4 CIDR block of the requester's VPC.    requester-vpc-info.owner-id - The AWS account ID of the owner of the requester VPC.    requester-vpc-info.vpc-id - The ID of the requester VPC.    status-code - The status of the VPC peering connection (pending-acceptance | failed | expired | provisioning | active | deleting | deleted | rejected).    status-message - A message that provides more information about the status of the VPC peering connection, if applicable.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-peering-connection-id - The ID of the VPC peering connection.  
+     * One or more filters.    accepter-vpc-info.cidr-block - The IPv4 CIDR block of the accepter VPC.    accepter-vpc-info.owner-id - The ID of the account that owns the accepter VPC.    accepter-vpc-info.vpc-id - The ID of the accepter VPC.    expiration-time - The expiration date and time for the VPC peering connection.    requester-vpc-info.cidr-block - The IPv4 CIDR block of the requester's VPC.    requester-vpc-info.owner-id - The ID of the account that owns the requester VPC.    requester-vpc-info.vpc-id - The ID of the requester VPC.    status-code - The status of the VPC peering connection (pending-acceptance | failed | expired | provisioning | active | deleting | deleted | rejected).    status-message - A message that provides more information about the status of the VPC peering connection, if applicable.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-peering-connection-id - The ID of the VPC peering connection.  
      */
     Filters?: FilterList;
     /**
@@ -13705,7 +13817,7 @@ declare namespace EC2 {
   export type DescribeVpcsMaxResults = number;
   export interface DescribeVpcsRequest {
     /**
-     * One or more filters.    cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify must exactly match the VPC's CIDR block for information to be returned for the VPC. Must contain the slash followed by one or two digits (for example, /28).    cidr-block-association.cidr-block - An IPv4 CIDR block associated with the VPC.    cidr-block-association.association-id - The association ID for an IPv4 CIDR block associated with the VPC.    cidr-block-association.state - The state of an IPv4 CIDR block associated with the VPC.    dhcp-options-id - The ID of a set of DHCP options.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.ipv6-pool - The ID of the IPv6 address pool from which the IPv6 CIDR block is allocated.    ipv6-cidr-block-association.association-id - The association ID for an IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the VPC.    isDefault - Indicates whether the VPC is the default VPC.    owner-id - The ID of the AWS account that owns the VPC.    state - The state of the VPC (pending | available).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC.  
+     * One or more filters.    cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify must exactly match the VPC's CIDR block for information to be returned for the VPC. Must contain the slash followed by one or two digits (for example, /28).    cidr-block-association.cidr-block - An IPv4 CIDR block associated with the VPC.    cidr-block-association.association-id - The association ID for an IPv4 CIDR block associated with the VPC.    cidr-block-association.state - The state of an IPv4 CIDR block associated with the VPC.    dhcp-options-id - The ID of a set of DHCP options.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.ipv6-pool - The ID of the IPv6 address pool from which the IPv6 CIDR block is allocated.    ipv6-cidr-block-association.association-id - The association ID for an IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the VPC.    is-default - Indicates whether the VPC is the default VPC.    owner-id - The ID of the account that owns the VPC.    state - The state of the VPC (pending | available).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC.  
      */
     Filters?: FilterList;
     /**
@@ -13882,7 +13994,7 @@ declare namespace EC2 {
      */
     DhcpOptionsId?: String;
     /**
-     * The ID of the AWS account that owns the DHCP options set.
+     * The ID of the account that owns the DHCP options set.
      */
     OwnerId?: String;
     /**
@@ -16308,6 +16420,43 @@ declare namespace EC2 {
      */
     SerialConsoleAccessEnabled?: Boolean;
   }
+  export type GetSubnetCidrReservationsMaxResults = number;
+  export interface GetSubnetCidrReservationsRequest {
+    /**
+     * One or more filters.    reservationType - The type of reservation (prefix | explicit).    subnet-id - The ID of the subnet.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     */
+    Filters?: FilterList;
+    /**
+     * The ID of the subnet.
+     */
+    SubnetId: SubnetId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+    /**
+     * The token for the next page of results.
+     */
+    NextToken?: String;
+    /**
+     * The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
+     */
+    MaxResults?: GetSubnetCidrReservationsMaxResults;
+  }
+  export interface GetSubnetCidrReservationsResult {
+    /**
+     * Information about the IPv4 subnet CIDR reservations.
+     */
+    SubnetIpv4CidrReservations?: SubnetCidrReservationList;
+    /**
+     * Information about the IPv6 subnet CIDR reservations.
+     */
+    SubnetIpv6CidrReservations?: SubnetCidrReservationList;
+    /**
+     * The token to use to retrieve the next page of results. This value is null when there are no more results to return.
+     */
+    NextToken?: String;
+  }
   export interface GetTransitGatewayAttachmentPropagationsRequest {
     /**
      * The ID of the attachment.
@@ -18064,6 +18213,13 @@ declare namespace EC2 {
   export type InstanceIdStringList = InstanceId[];
   export type InstanceIdsSet = InstanceId[];
   export type InstanceInterruptionBehavior = "hibernate"|"stop"|"terminate"|string;
+  export interface InstanceIpv4Prefix {
+    /**
+     * One or more IPv4 delegated prefixes assigned to the network interface.
+     */
+    Ipv4Prefix?: String;
+  }
+  export type InstanceIpv4PrefixList = InstanceIpv4Prefix[];
   export interface InstanceIpv6Address {
     /**
      * The IPv6 address.
@@ -18078,6 +18234,13 @@ declare namespace EC2 {
      */
     Ipv6Address?: String;
   }
+  export interface InstanceIpv6Prefix {
+    /**
+     * One or more IPv6 delegated prefixes assigned to the network interface.
+     */
+    Ipv6Prefix?: String;
+  }
+  export type InstanceIpv6PrefixList = InstanceIpv6Prefix[];
   export type InstanceLifecycle = "spot"|"on-demand"|string;
   export type InstanceLifecycleType = "spot"|"scheduled"|string;
   export type InstanceList = Instance[];
@@ -18202,6 +18365,14 @@ declare namespace EC2 {
      * Describes the type of network interface. Valid values: interface | efa | trunk 
      */
     InterfaceType?: String;
+    /**
+     * The IPv4 delegated prefixes that are assigned to the network interface.
+     */
+    Ipv4Prefixes?: InstanceIpv4PrefixList;
+    /**
+     * The IPv6 delegated prefixes that are assigned to the network interface.
+     */
+    Ipv6Prefixes?: InstanceIpv6PrefixList;
   }
   export interface InstanceNetworkInterfaceAssociation {
     /**
@@ -18309,6 +18480,22 @@ declare namespace EC2 {
      * The index of the network card. Some instance types support multiple network cards. The primary network interface must be assigned to network card index 0. The default is network card index 0.
      */
     NetworkCardIndex?: Integer;
+    /**
+     * One or more IPv4 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: Ipv4PrefixList;
+    /**
+     * The number of IPv4 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv4Prefix option.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or more IPv6 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: Ipv6PrefixList;
+    /**
+     * The number of IPv6 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv6Prefix option.
+     */
+    Ipv6PrefixCount?: Integer;
   }
   export type InstanceNetworkInterfaceSpecificationList = InstanceNetworkInterfaceSpecification[];
   export interface InstancePrivateIpAddress {
@@ -18622,7 +18809,7 @@ declare namespace EC2 {
      */
     InternetGatewayId?: String;
     /**
-     * The ID of the AWS account that owns the internet gateway.
+     * The ID of the account that owns the internet gateway.
      */
     OwnerId?: String;
     /**
@@ -18677,6 +18864,7 @@ declare namespace EC2 {
     UserIdGroupPairs?: UserIdGroupPairList;
   }
   export type IpPermissionList = IpPermission[];
+  export type IpPrefixList = String[];
   export interface IpRange {
     /**
      * The IPv4 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv4 address, use the /32 prefix length.
@@ -18690,6 +18878,27 @@ declare namespace EC2 {
   export type IpRangeList = IpRange[];
   export type IpRanges = String[];
   export type Ipv4PoolEc2Id = string;
+  export type Ipv4PrefixList = Ipv4PrefixSpecificationRequest[];
+  export type Ipv4PrefixListResponse = Ipv4PrefixSpecificationResponse[];
+  export interface Ipv4PrefixSpecification {
+    /**
+     * The IPv4 Prefix Delegation prefix. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
+     */
+    Ipv4Prefix?: String;
+  }
+  export interface Ipv4PrefixSpecificationRequest {
+    /**
+     * The IPv4 Prefix Delegation prefix. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
+     */
+    Ipv4Prefix?: String;
+  }
+  export interface Ipv4PrefixSpecificationResponse {
+    /**
+     * One or more IPv4 delegated prefixes assigned to the network interface.
+     */
+    Ipv4Prefix?: String;
+  }
+  export type Ipv4PrefixesList = Ipv4PrefixSpecification[];
   export type Ipv6Address = string;
   export type Ipv6AddressList = String[];
   export interface Ipv6CidrAssociation {
@@ -18733,6 +18942,27 @@ declare namespace EC2 {
   export type Ipv6PoolIdList = Ipv6PoolEc2Id[];
   export type Ipv6PoolMaxResults = number;
   export type Ipv6PoolSet = Ipv6Pool[];
+  export type Ipv6PrefixList = Ipv6PrefixSpecificationRequest[];
+  export type Ipv6PrefixListResponse = Ipv6PrefixSpecificationResponse[];
+  export interface Ipv6PrefixSpecification {
+    /**
+     * The IPv6 Prefix Delegation prefix.
+     */
+    Ipv6Prefix?: String;
+  }
+  export interface Ipv6PrefixSpecificationRequest {
+    /**
+     * The IPv6 Prefix Delegation prefix.
+     */
+    Ipv6Prefix?: String;
+  }
+  export interface Ipv6PrefixSpecificationResponse {
+    /**
+     * One or more IPv6 delegated prefixes assigned to the network interface.
+     */
+    Ipv6Prefix?: String;
+  }
+  export type Ipv6PrefixesList = Ipv6PrefixSpecification[];
   export interface Ipv6Range {
     /**
      * The IPv6 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv6 address, use the /128 prefix length.
@@ -19026,7 +19256,7 @@ declare namespace EC2 {
      */
     Iops?: Integer;
     /**
-     * The ARN of the AWS Key Management Service (AWS KMS) CMK used for encryption.
+     * The ARN of the Key Management Service (KMS) CMK used for encryption.
      */
     KmsKeyId?: KmsKeyId;
     /**
@@ -19060,7 +19290,7 @@ declare namespace EC2 {
      */
     Iops?: Integer;
     /**
-     * The ARN of the symmetric AWS Key Management Service (AWS KMS) CMK used for encryption.
+     * The ARN of the symmetric Key Management Service (KMS) CMK used for encryption.
      */
     KmsKeyId?: KmsKeyId;
     /**
@@ -19105,13 +19335,13 @@ declare namespace EC2 {
   export type LaunchTemplateElasticInferenceAcceleratorResponseList = LaunchTemplateElasticInferenceAcceleratorResponse[];
   export interface LaunchTemplateEnclaveOptions {
     /**
-     * If this parameter is set to true, the instance is enabled for AWS Nitro Enclaves; otherwise, it is not enabled for AWS Nitro Enclaves.
+     * If this parameter is set to true, the instance is enabled for Amazon Web Services Nitro Enclaves; otherwise, it is not enabled for Amazon Web Services Nitro Enclaves.
      */
     Enabled?: Boolean;
   }
   export interface LaunchTemplateEnclaveOptionsRequest {
     /**
-     * To enable the instance for AWS Nitro Enclaves, set this parameter to true.
+     * To enable the instance for Amazon Web Services Nitro Enclaves, set this parameter to true.
      */
     Enabled?: Boolean;
   }
@@ -19207,7 +19437,7 @@ declare namespace EC2 {
   export type LaunchTemplateInstanceMetadataOptionsState = "pending"|"applied"|string;
   export interface LaunchTemplateInstanceNetworkInterfaceSpecification {
     /**
-     * Indicates whether to associate a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the AWS Wavelength Developer Guide.
+     * Indicates whether to associate a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the Wavelength Developer Guide.
      */
     AssociateCarrierIpAddress?: Boolean;
     /**
@@ -19266,11 +19496,27 @@ declare namespace EC2 {
      * The index of the network card.
      */
     NetworkCardIndex?: Integer;
+    /**
+     * One or more IPv4 delegated prefixes assigned to the network interface.
+     */
+    Ipv4Prefixes?: Ipv4PrefixListResponse;
+    /**
+     * The number of IPv4 delegated prefixes that AWS automatically assigned to the network interface.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or more IPv6 delegated prefixes assigned to the network interface.
+     */
+    Ipv6Prefixes?: Ipv6PrefixListResponse;
+    /**
+     * The number of IPv6 delegated prefixes that AWS automatically assigned to the network interface.
+     */
+    Ipv6PrefixCount?: Integer;
   }
   export type LaunchTemplateInstanceNetworkInterfaceSpecificationList = LaunchTemplateInstanceNetworkInterfaceSpecification[];
   export interface LaunchTemplateInstanceNetworkInterfaceSpecificationRequest {
     /**
-     * Associates a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the AWS Wavelength Developer Guide.
+     * Associates a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the Wavelength Developer Guide.
      */
     AssociateCarrierIpAddress?: Boolean;
     /**
@@ -19329,6 +19575,22 @@ declare namespace EC2 {
      * The index of the network card. Some instance types support multiple network cards. The primary network interface must be assigned to network card index 0. The default is network card index 0.
      */
     NetworkCardIndex?: Integer;
+    /**
+     * One or more IPv4 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: Ipv4PrefixList;
+    /**
+     * The number of IPv4 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv4Prefix option.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or more IPv6 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: Ipv6PrefixList;
+    /**
+     * The number of IPv6 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv6Prefix option.
+     */
+    Ipv6PrefixCount?: Integer;
   }
   export type LaunchTemplateInstanceNetworkInterfaceSpecificationRequestList = LaunchTemplateInstanceNetworkInterfaceSpecificationRequest[];
   export interface LaunchTemplateLicenseConfiguration {
@@ -21536,7 +21798,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the network ACL.
+     * The ID of the account that owns the network ACL.
      */
     OwnerId?: String;
   }
@@ -21670,7 +21932,7 @@ declare namespace EC2 {
      */
     NetworkInsightsPathId?: NetworkInsightsPathId;
     /**
-     * The Amazon Resource Names (ARN) of the AWS resources that the path must traverse.
+     * The Amazon Resource Names (ARN) of the Amazon Web Services resources that the path must traverse.
      */
     FilterInArns?: ArnList;
     /**
@@ -21728,19 +21990,19 @@ declare namespace EC2 {
      */
     CreatedDate?: MillisecondDateTime;
     /**
-     * The AWS resource that is the source of the path.
+     * The Amazon Web Services resource that is the source of the path.
      */
     Source?: String;
     /**
-     * The AWS resource that is the destination of the path.
+     * The Amazon Web Services resource that is the destination of the path.
      */
     Destination?: String;
     /**
-     * The IP address of the AWS resource that is the source of the path.
+     * The IP address of the Amazon Web Services resource that is the source of the path.
      */
     SourceIp?: IpAddress;
     /**
-     * The IP address of the AWS resource that is the destination of the path.
+     * The IP address of the Amazon Web Services resource that is the destination of the path.
      */
     DestinationIp?: IpAddress;
     /**
@@ -21816,6 +22078,14 @@ declare namespace EC2 {
      * The private IPv4 addresses associated with the network interface.
      */
     PrivateIpAddresses?: NetworkInterfacePrivateIpAddressList;
+    /**
+     * The IPv4 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    Ipv4Prefixes?: Ipv4PrefixesList;
+    /**
+     * The IPv6 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    Ipv6Prefixes?: Ipv6PrefixesList;
     /**
      * The alias or account ID of the principal or service that created the network interface.
      */
@@ -23508,15 +23778,15 @@ declare namespace EC2 {
      */
     LicenseSpecifications?: LaunchTemplateLicenseSpecificationListRequest;
     /**
-     * Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate Your Instance in the Amazon Elastic Compute Cloud User Guide.
+     * Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon Elastic Compute Cloud User Guide.
      */
     HibernationOptions?: LaunchTemplateHibernationOptionsRequest;
     /**
-     * The metadata options for the instance. For more information, see Instance Metadata and User Data in the Amazon Elastic Compute Cloud User Guide.
+     * The metadata options for the instance. For more information, see Instance metadata and user data in the Amazon Elastic Compute Cloud User Guide.
      */
     MetadataOptions?: LaunchTemplateInstanceMetadataOptionsRequest;
     /**
-     * Indicates whether the instance is enabled for AWS Nitro Enclaves. For more information, see  What is AWS Nitro Enclaves? in the AWS Nitro Enclaves User Guide. You can't enable AWS Nitro Enclaves and hibernation on the same instance.
+     * Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves. For more information, see  What is Amazon Web Services Nitro Enclaves? in the Amazon Web Services Nitro Enclaves User Guide. You can't enable Amazon Web Services Nitro Enclaves and hibernation on the same instance.
      */
     EnclaveOptions?: LaunchTemplateEnclaveOptionsRequest;
   }
@@ -24205,7 +24475,7 @@ declare namespace EC2 {
      */
     CreditSpecification?: CreditSpecification;
     /**
-     * The CPU options for the instance. For more information, see Optimizing CPU Options in the Amazon Elastic Compute Cloud User Guide.
+     * The CPU options for the instance. For more information, see Optimizing CPU options in the Amazon Elastic Compute Cloud User Guide.
      */
     CpuOptions?: LaunchTemplateCpuOptions;
     /**
@@ -24217,15 +24487,15 @@ declare namespace EC2 {
      */
     LicenseSpecifications?: LaunchTemplateLicenseList;
     /**
-     * Indicates whether an instance is configured for hibernation. For more information, see Hibernate Your Instance in the Amazon Elastic Compute Cloud User Guide.
+     * Indicates whether an instance is configured for hibernation. For more information, see Hibernate your instance in the Amazon Elastic Compute Cloud User Guide.
      */
     HibernationOptions?: LaunchTemplateHibernationOptions;
     /**
-     * The metadata options for the instance. For more information, see Instance Metadata and User Data in the Amazon Elastic Compute Cloud User Guide.
+     * The metadata options for the instance. For more information, see Instance metadata and user data in the Amazon Elastic Compute Cloud User Guide.
      */
     MetadataOptions?: LaunchTemplateInstanceMetadataOptions;
     /**
-     * Indicates whether the instance is enabled for AWS Nitro Enclaves.
+     * Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.
      */
     EnclaveOptions?: LaunchTemplateEnclaveOptions;
   }
@@ -24423,7 +24693,7 @@ declare namespace EC2 {
      */
     DestinationIpv6CidrBlock?: String;
     /**
-     * The prefix of the AWS service.
+     * The prefix of the Amazon Web Service.
      */
     DestinationPrefixListId?: String;
     /**
@@ -24439,7 +24709,7 @@ declare namespace EC2 {
      */
     InstanceId?: String;
     /**
-     * The AWS account ID of the owner of the instance.
+     * The ID of account that owns the instance.
      */
     InstanceOwnerId?: String;
     /**
@@ -24505,7 +24775,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the route table.
+     * The ID of the account that owns the route table.
      */
     OwnerId?: String;
   }
@@ -26357,7 +26627,7 @@ declare namespace EC2 {
      */
     TagSpecifications?: TagSpecificationList;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken: String;
   }
@@ -26517,7 +26787,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the subnet.
+     * The ID of the account that owns the subnet.
      */
     OwnerId?: String;
     /**
@@ -26564,6 +26834,39 @@ declare namespace EC2 {
     StatusMessage?: String;
   }
   export type SubnetCidrBlockStateCode = "associating"|"associated"|"disassociating"|"disassociated"|"failing"|"failed"|string;
+  export interface SubnetCidrReservation {
+    /**
+     * The ID of the subnet CIDR reservation.
+     */
+    SubnetCidrReservationId?: SubnetCidrReservationId;
+    /**
+     * The ID of the subnet.
+     */
+    SubnetId?: SubnetId;
+    /**
+     * The CIDR that has been reserved.
+     */
+    Cidr?: String;
+    /**
+     * The type of reservation. 
+     */
+    ReservationType?: SubnetCidrReservationType;
+    /**
+     * The ID of the account that owns the subnet CIDR reservation. 
+     */
+    OwnerId?: String;
+    /**
+     * The description assigned to the subnet CIDR reservation.
+     */
+    Description?: String;
+    /**
+     * The tags assigned to the subnet CIDR reservation.
+     */
+    Tags?: TagList;
+  }
+  export type SubnetCidrReservationId = string;
+  export type SubnetCidrReservationList = SubnetCidrReservation[];
+  export type SubnetCidrReservationType = "prefix"|"explicit"|string;
   export type SubnetId = string;
   export type SubnetIdStringList = SubnetId[];
   export interface SubnetIpv6CidrBlockAssociation {
@@ -27911,13 +28214,17 @@ declare namespace EC2 {
   export type TunnelOptionsList = TunnelOption[];
   export interface UnassignIpv6AddressesRequest {
     /**
-     * The ID of the network interface.
+     * The IPv6 addresses to unassign from the network interface.
      */
-    NetworkInterfaceId: NetworkInterfaceId;
+    Ipv6Addresses?: Ipv6AddressList;
     /**
-     * The IPv6 addresses to unassign from the network interface.
+     * One or moreIPv6 Prefix Delegation prefixes to unassign from the network interface.
+     */
+    Ipv6Prefixes?: IpPrefixList;
+    /**
+     * The ID of the network interface.
      */
-    Ipv6Addresses: Ipv6AddressList;
+    NetworkInterfaceId: NetworkInterfaceId;
   }
   export interface UnassignIpv6AddressesResult {
     /**
@@ -27928,6 +28235,10 @@ declare namespace EC2 {
      * The IPv6 addresses that have been unassigned from the network interface.
      */
     UnassignedIpv6Addresses?: Ipv6AddressList;
+    /**
+     * The IPv4 Prefix Delegation prefixes that have been unassigned from the network interface.
+     */
+    UnassignedIpv6Prefixes?: IpPrefixList;
   }
   export interface UnassignPrivateIpAddressesRequest {
     /**
@@ -27937,7 +28248,11 @@ declare namespace EC2 {
     /**
      * The secondary private IP addresses to unassign from the network interface. You can specify this option multiple times to unassign more than one IP address.
      */
-    PrivateIpAddresses: PrivateIpAddressStringList;
+    PrivateIpAddresses?: PrivateIpAddressStringList;
+    /**
+     * The IPv4 Prefix Delegation prefixes to unassign from the network interface.
+     */
+    Ipv4Prefixes?: IpPrefixList;
   }
   export type UnlimitedSupportedInstanceFamily = "t2"|"t3"|"t3a"|"t4g"|string;
   export interface UnmonitorInstancesRequest {
@@ -28492,7 +28807,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the VPC.
+     * The ID of the account that owns the VPC.
      */
     OwnerId?: String;
     /**
@@ -28780,7 +29095,7 @@ declare namespace EC2 {
      */
     CidrBlockSet?: CidrBlockSet;
     /**
-     * The AWS account ID of the VPC owner.
+     * The ID of the account that owns the VPC.
      */
     OwnerId?: String;
     /**