aws-sdk 2.949.0 → 2.953.0

package/clients/ec2.d.ts

@@ -93,19 +93,19 @@ declare class EC2 extends Service {
    */
   applySecurityGroupsToClientVpnTargetNetwork(callback?: (err: AWSError, data: EC2.Types.ApplySecurityGroupsToClientVpnTargetNetworkResult) => void): Request<EC2.Types.ApplySecurityGroupsToClientVpnTargetNetworkResult, AWSError>;
   /**
-   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.
+   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.  You can optionally use Prefix Delegation on the network interface. You must specify either the IPV6 Prefix Delegation prefixes, or the IPv6 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignIpv6Addresses(params: EC2.Types.AssignIpv6AddressesRequest, callback?: (err: AWSError, data: EC2.Types.AssignIpv6AddressesResult) => void): Request<EC2.Types.AssignIpv6AddressesResult, AWSError>;
   /**
-   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.
+   * Assigns one or more IPv6 addresses to the specified network interface. You can specify one or more specific IPv6 addresses, or you can specify the number of IPv6 addresses to be automatically assigned from within the subnet's IPv6 CIDR block range. You can assign as many IPv6 addresses to a network interface as you can assign private IPv4 addresses, and the limit varies per instance type. For information, see IP Addresses Per Network Interface Per Instance Type in the Amazon Elastic Compute Cloud User Guide. You must specify either the IPv6 addresses or the IPv6 address count in the request.  You can optionally use Prefix Delegation on the network interface. You must specify either the IPV6 Prefix Delegation prefixes, or the IPv6 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignIpv6Addresses(callback?: (err: AWSError, data: EC2.Types.AssignIpv6AddressesResult) => void): Request<EC2.Types.AssignIpv6AddressesResult, AWSError>;
   /**
-   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request.
+   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request. You can optionally use Prefix Delegation on the network interface. You must specify either the IPv4 Prefix Delegation prefixes, or the IPv4 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignPrivateIpAddresses(params: EC2.Types.AssignPrivateIpAddressesRequest, callback?: (err: AWSError, data: EC2.Types.AssignPrivateIpAddressesResult) => void): Request<EC2.Types.AssignPrivateIpAddressesResult, AWSError>;
   /**
-   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request.
+   * Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide. When you move a secondary private IP address to another network interface, any Elastic IP address that is associated with the IP address is also moved. Remapping an IP address is an asynchronous operation. When you move an IP address from one network interface to another, check network/interfaces/macs/mac/local-ipv4s in the instance metadata to confirm that the remapping is complete. You must specify either the IP addresses or the IP address count in the request. You can optionally use Prefix Delegation on the network interface. You must specify either the IPv4 Prefix Delegation prefixes, or the IPv4 Prefix Delegation count. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
    */
   assignPrivateIpAddresses(callback?: (err: AWSError, data: EC2.Types.AssignPrivateIpAddressesResult) => void): Request<EC2.Types.AssignPrivateIpAddressesResult, AWSError>;
   /**
@@ -125,11 +125,11 @@ declare class EC2 extends Service {
    */
   associateClientVpnTargetNetwork(callback?: (err: AWSError, data: EC2.Types.AssociateClientVpnTargetNetworkResult) => void): Request<EC2.Types.AssociateClientVpnTargetNetworkResult, AWSError>;
   /**
-   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   associateDhcpOptions(params: EC2.Types.AssociateDhcpOptionsRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC. After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   associateDhcpOptions(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -157,11 +157,11 @@ declare class EC2 extends Service {
    */
   associateInstanceEventWindow(callback?: (err: AWSError, data: EC2.Types.AssociateInstanceEventWindowResult) => void): Request<EC2.Types.AssociateInstanceEventWindowResult, AWSError>;
   /**
-   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   associateRouteTable(params: EC2.Types.AssociateRouteTableRequest, callback?: (err: AWSError, data: EC2.Types.AssociateRouteTableResult) => void): Request<EC2.Types.AssociateRouteTableResult, AWSError>;
   /**
-   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Associates a subnet in your VPC or an internet gateway or virtual private gateway attached to your VPC with a route table in your VPC. This association causes traffic from the subnet or gateway to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table later. A route table can be associated with multiple subnets. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   associateRouteTable(callback?: (err: AWSError, data: EC2.Types.AssociateRouteTableResult) => void): Request<EC2.Types.AssociateRouteTableResult, AWSError>;
   /**
@@ -197,11 +197,11 @@ declare class EC2 extends Service {
    */
   associateTrunkInterface(callback?: (err: AWSError, data: EC2.Types.AssociateTrunkInterfaceResult) => void): Request<EC2.Types.AssociateTrunkInterfaceResult, AWSError>;
   /**
-   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and Subnet Sizing in the Amazon Virtual Private Cloud User Guide.
+   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and subnet sizing in the Amazon Virtual Private Cloud User Guide.
    */
   associateVpcCidrBlock(params: EC2.Types.AssociateVpcCidrBlockRequest, callback?: (err: AWSError, data: EC2.Types.AssociateVpcCidrBlockResult) => void): Request<EC2.Types.AssociateVpcCidrBlockResult, AWSError>;
   /**
-   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and Subnet Sizing in the Amazon Virtual Private Cloud User Guide.
+   * Associates a CIDR block with your VPC. You can associate a secondary IPv4 CIDR block, an Amazon-provided IPv6 CIDR block, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). The IPv6 CIDR block size is fixed at /56. You must specify one of the following in the request: an IPv4 CIDR block, an IPv6 pool, or an Amazon-provided IPv6 CIDR block. For more information about associating CIDR blocks with your VPC and applicable restrictions, see VPC and subnet sizing in the Amazon Virtual Private Cloud User Guide.
    */
   associateVpcCidrBlock(callback?: (err: AWSError, data: EC2.Types.AssociateVpcCidrBlockResult) => void): Request<EC2.Types.AssociateVpcCidrBlockResult, AWSError>;
   /**
@@ -229,11 +229,11 @@ declare class EC2 extends Service {
    */
   attachNetworkInterface(callback?: (err: AWSError, data: EC2.Types.AttachNetworkInterfaceResult) => void): Request<EC2.Types.AttachNetworkInterfaceResult, AWSError>;
   /**
-   * Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name. Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. After you attach an EBS volume, you must make it available. For more information, see Making an EBS volume available for use. If a volume has an AWS Marketplace product code:   The volume can be attached only to a stopped instance.   AWS Marketplace product codes are copied from the volume to the instance.   You must be subscribed to the product.   The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.   For more information, see Attaching Amazon EBS volumes in the Amazon Elastic Compute Cloud User Guide.
+   * Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name. Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. After you attach an EBS volume, you must make it available. For more information, see Make an EBS volume available for use. If a volume has an Marketplace product code:   The volume can be attached only to a stopped instance.   Marketplace product codes are copied from the volume to the instance.   You must be subscribed to the product.   The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.   For more information, see Attach an Amazon EBS volume to an instance in the Amazon Elastic Compute Cloud User Guide.
    */
   attachVolume(params: EC2.Types.AttachVolumeRequest, callback?: (err: AWSError, data: EC2.Types.VolumeAttachment) => void): Request<EC2.Types.VolumeAttachment, AWSError>;
   /**
-   * Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name. Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. After you attach an EBS volume, you must make it available. For more information, see Making an EBS volume available for use. If a volume has an AWS Marketplace product code:   The volume can be attached only to a stopped instance.   AWS Marketplace product codes are copied from the volume to the instance.   You must be subscribed to the product.   The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.   For more information, see Attaching Amazon EBS volumes in the Amazon Elastic Compute Cloud User Guide.
+   * Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name. Encrypted EBS volumes must be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. After you attach an EBS volume, you must make it available. For more information, see Make an EBS volume available for use. If a volume has an Marketplace product code:   The volume can be attached only to a stopped instance.   Marketplace product codes are copied from the volume to the instance.   You must be subscribed to the product.   The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.   For more information, see Attach an Amazon EBS volume to an instance in the Amazon Elastic Compute Cloud User Guide.
    */
   attachVolume(callback?: (err: AWSError, data: EC2.Types.VolumeAttachment) => void): Request<EC2.Types.VolumeAttachment, AWSError>;
   /**
@@ -365,11 +365,11 @@ declare class EC2 extends Service {
    */
   copyImage(callback?: (err: AWSError, data: EC2.Types.CopyImageResult) => void): Request<EC2.Types.CopyImageResult, AWSError>;
   /**
-   * Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost. You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs). When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default AWS Key Management Service (AWS KMS) customer master key (CMK); however, you can specify a different CMK. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the CMK used to encrypt the snapshot. Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information,  Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide. Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose. For more information, see Copying an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
+   * Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost. You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs). When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default Key Management Service (KMS) KMS key; however, you can specify a different KMS key. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the KMS key used to encrypt the snapshot. Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information,  Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide. Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose. For more information, see Copy an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   copySnapshot(params: EC2.Types.CopySnapshotRequest, callback?: (err: AWSError, data: EC2.Types.CopySnapshotResult) => void): Request<EC2.Types.CopySnapshotResult, AWSError>;
   /**
-   * Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost. You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs). When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default AWS Key Management Service (AWS KMS) customer master key (CMK); however, you can specify a different CMK. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the CMK used to encrypt the snapshot. Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information,  Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide. Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose. For more information, see Copying an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
+   * Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy a snapshot within the same Region, from one Region to another, or from a Region to an Outpost. You can't copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost. You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs). When copying snapshots to a Region, copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless you enable encryption for the snapshot copy operation. By default, encrypted snapshot copies use the default Key Management Service (KMS) KMS key; however, you can specify a different KMS key. To copy an encrypted snapshot that has been shared from another account, you must have permissions for the KMS key used to encrypt the snapshot. Snapshots copied to an Outpost are encrypted by default using the default encryption key for the Region, or a different key that you specify in the request using KmsKeyId. Outposts do not support unencrypted snapshots. For more information,  Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide. Snapshots created by copying another snapshot have an arbitrary volume ID that should not be used for any purpose. For more information, see Copy an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   copySnapshot(callback?: (err: AWSError, data: EC2.Types.CopySnapshotResult) => void): Request<EC2.Types.CopySnapshotResult, AWSError>;
   /**
@@ -381,11 +381,11 @@ declare class EC2 extends Service {
    */
   createCapacityReservation(callback?: (err: AWSError, data: EC2.Types.CreateCapacityReservationResult) => void): Request<EC2.Types.CreateCapacityReservationResult, AWSError>;
   /**
-   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the AWS Wavelength Developer Guide.
+   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the Amazon Web Services Wavelength Developer Guide.
    */
   createCarrierGateway(params: EC2.Types.CreateCarrierGatewayRequest, callback?: (err: AWSError, data: EC2.Types.CreateCarrierGatewayResult) => void): Request<EC2.Types.CreateCarrierGatewayResult, AWSError>;
   /**
-   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the AWS Wavelength Developer Guide.
+   * Creates a carrier gateway. For more information about carrier gateways, see Carrier gateways in the Amazon Web Services Wavelength Developer Guide.
    */
   createCarrierGateway(callback?: (err: AWSError, data: EC2.Types.CreateCarrierGatewayResult) => void): Request<EC2.Types.CreateCarrierGatewayResult, AWSError>;
   /**
@@ -413,27 +413,27 @@ declare class EC2 extends Service {
    */
   createCustomerGateway(callback?: (err: AWSError, data: EC2.Types.CreateCustomerGatewayResult) => void): Request<EC2.Types.CreateCustomerGatewayResult, AWSError>;
   /**
-   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a Default Subnet in the Amazon Virtual Private Cloud User Guide.
+   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a default subnet in the Amazon Virtual Private Cloud User Guide.
    */
   createDefaultSubnet(params: EC2.Types.CreateDefaultSubnetRequest, callback?: (err: AWSError, data: EC2.Types.CreateDefaultSubnetResult) => void): Request<EC2.Types.CreateDefaultSubnetResult, AWSError>;
   /**
-   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a Default Subnet in the Amazon Virtual Private Cloud User Guide.
+   * Creates a default subnet with a size /20 IPv4 CIDR block in the specified Availability Zone in your default VPC. You can have only one default subnet per Availability Zone. For more information, see Creating a default subnet in the Amazon Virtual Private Cloud User Guide.
    */
   createDefaultSubnet(callback?: (err: AWSError, data: EC2.Types.CreateDefaultSubnetResult) => void): Request<EC2.Types.CreateDefaultSubnetResult, AWSError>;
   /**
-   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and Default Subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
+   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and default subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
    */
   createDefaultVpc(params: EC2.Types.CreateDefaultVpcRequest, callback?: (err: AWSError, data: EC2.Types.CreateDefaultVpcResult) => void): Request<EC2.Types.CreateDefaultVpcResult, AWSError>;
   /**
-   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and Default Subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
+   * Creates a default VPC with a size /16 IPv4 CIDR block and a default subnet in each Availability Zone. For more information about the components of a default VPC, see Default VPC and default subnets in the Amazon Virtual Private Cloud User Guide. You cannot specify the components of the default VPC yourself. If you deleted your previous default VPC, you can create a default VPC. You cannot have more than one default VPC per Region. If your account supports EC2-Classic, you cannot use this action to create a default VPC in a Region that supports EC2-Classic. If you want a default VPC in a Region that supports EC2-Classic, see "I really want a default VPC for my existing EC2 account. Is that possible?" in the Default VPCs FAQ.
    */
   createDefaultVpc(callback?: (err: AWSError, data: EC2.Types.CreateDefaultVpcResult) => void): Request<EC2.Types.CreateDefaultVpcResult, AWSError>;
   /**
-   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   createDhcpOptions(params: EC2.Types.CreateDhcpOptionsRequest, callback?: (err: AWSError, data: EC2.Types.CreateDhcpOptionsResult) => void): Request<EC2.Types.CreateDhcpOptionsResult, AWSError>;
   /**
-   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.    domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas. To have your instance receive a custom DNS hostname as specified in domain-name, you must set domain-name-servers to a custom DNS server.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in another Region, specify region.compute.internal (for example, ap-northeast-1.compute.internal). Otherwise, specify a domain name (for example, ExampleCompany.com). This value is used to complete unqualified DNS hostnames. Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.    ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.   Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   createDhcpOptions(callback?: (err: AWSError, data: EC2.Types.CreateDhcpOptionsResult) => void): Request<EC2.Types.CreateDhcpOptionsResult, AWSError>;
   /**
@@ -453,11 +453,11 @@ declare class EC2 extends Service {
    */
   createFleet(callback?: (err: AWSError, data: EC2.Types.CreateFleetResult) => void): Request<EC2.Types.CreateFleetResult, AWSError>;
   /**
-   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow Log Records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
+   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow log records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
    */
   createFlowLogs(params: EC2.Types.CreateFlowLogsRequest, callback?: (err: AWSError, data: EC2.Types.CreateFlowLogsResult) => void): Request<EC2.Types.CreateFlowLogsResult, AWSError>;
   /**
-   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow Log Records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
+   * Creates one or more flow logs to capture information about IP traffic for a specific network interface, subnet, or VPC.  Flow log data for a monitored network interface is recorded as flow log records, which are log events consisting of fields that describe the traffic flow. For more information, see Flow log records in the Amazon Virtual Private Cloud User Guide. When publishing to CloudWatch Logs, flow log records are published to a log group, and each network interface has a unique log stream in the log group. When publishing to Amazon S3, flow log records for all of the monitored network interfaces are published to a single log file object that is stored in the specified bucket. For more information, see VPC Flow Logs in the Amazon Virtual Private Cloud User Guide.
    */
   createFlowLogs(callback?: (err: AWSError, data: EC2.Types.CreateFlowLogsResult) => void): Request<EC2.Types.CreateFlowLogsResult, AWSError>;
   /**
@@ -549,11 +549,11 @@ declare class EC2 extends Service {
    */
   createManagedPrefixList(callback?: (err: AWSError, data: EC2.Types.CreateManagedPrefixListResult) => void): Request<EC2.Types.CreateManagedPrefixListResult, AWSError>;
   /**
-   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT Gateways in the Amazon Virtual Private Cloud User Guide.
+   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT gateways in the Amazon Virtual Private Cloud User Guide.
    */
   createNatGateway(params: EC2.Types.CreateNatGatewayRequest, callback?: (err: AWSError, data: EC2.Types.CreateNatGatewayResult) => void): Request<EC2.Types.CreateNatGatewayResult, AWSError>;
   /**
-   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT Gateways in the Amazon Virtual Private Cloud User Guide.
+   * Creates a NAT gateway in the specified subnet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. You can create either a public NAT gateway or a private NAT gateway. With a public NAT gateway, internet-bound traffic from a private subnet can be routed to the NAT gateway, so that instances in a private subnet can connect to the internet. With a private NAT gateway, private communication is routed across VPCs and on-premises networks through a transit gateway or virtual private gateway. Common use cases include running large workloads behind a small pool of allowlisted IPv4 addresses, preserving private IPv4 addresses, and communicating between overlapping networks. For more information, see NAT gateways in the Amazon Virtual Private Cloud User Guide.
    */
   createNatGateway(callback?: (err: AWSError, data: EC2.Types.CreateNatGatewayResult) => void): Request<EC2.Types.CreateNatGatewayResult, AWSError>;
   /**
@@ -629,19 +629,19 @@ declare class EC2 extends Service {
    */
   createRestoreImageTask(callback?: (err: AWSError, data: EC2.Types.CreateRestoreImageTaskResult) => void): Request<EC2.Types.CreateRestoreImageTaskResult, AWSError>;
   /**
-   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRoute(params: EC2.Types.CreateRouteRequest, callback?: (err: AWSError, data: EC2.Types.CreateRouteResult) => void): Request<EC2.Types.CreateRouteResult, AWSError>;
   /**
-   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route in a route table within a VPC. You must specify one of the following targets: internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. When determining how to route traffic, we use the route with the most specific match. For example, traffic is destined for the IPv4 address 192.0.2.3, and the route table includes the following two IPv4 routes:    192.0.2.0/24 (goes to some target A)    192.0.2.0/28 (goes to some target B)   Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRoute(callback?: (err: AWSError, data: EC2.Types.CreateRouteResult) => void): Request<EC2.Types.CreateRouteResult, AWSError>;
   /**
-   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRouteTable(params: EC2.Types.CreateRouteTableRequest, callback?: (err: AWSError, data: EC2.Types.CreateRouteTableResult) => void): Request<EC2.Types.CreateRouteTableResult, AWSError>;
   /**
-   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   createRouteTable(callback?: (err: AWSError, data: EC2.Types.CreateRouteTableResult) => void): Request<EC2.Types.CreateRouteTableResult, AWSError>;
   /**
@@ -653,11 +653,11 @@ declare class EC2 extends Service {
    */
   createSecurityGroup(callback?: (err: AWSError, data: EC2.Types.CreateSecurityGroupResult) => void): Request<EC2.Types.CreateSecurityGroupResult, AWSError>;
   /**
-   * Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance. You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost. When a snapshot is created, any AWS Marketplace product codes that are associated with the source volume are propagated to the snapshot. You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your EBS volume at the time the snapshot command is issued; this might exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending. To create a snapshot for EBS volumes that serve as root devices, you should stop the instance before taking the snapshot. Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected. You can tag your snapshots during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance. You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost. When a snapshot is created, any Marketplace product codes that are associated with the source volume are propagated to the snapshot. You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your Amazon EBS volume at the time the snapshot command is issued; this might exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending. To create a snapshot for Amazon EBS volumes that serve as root devices, you should stop the instance before taking the snapshot. Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected. You can tag your snapshots during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   createSnapshot(params: EC2.Types.CreateSnapshotRequest, callback?: (err: AWSError, data: EC2.Types.Snapshot) => void): Request<EC2.Types.Snapshot, AWSError>;
   /**
-   * Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance. You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost. When a snapshot is created, any AWS Marketplace product codes that are associated with the source volume are propagated to the snapshot. You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your EBS volume at the time the snapshot command is issued; this might exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending. To create a snapshot for EBS volumes that serve as root devices, you should stop the instance before taking the snapshot. Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected. You can tag your snapshots during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance. You can create snapshots of volumes in a Region and volumes on an Outpost. If you create a snapshot of a volume in a Region, the snapshot must be stored in the same Region as the volume. If you create a snapshot of a volume on an Outpost, the snapshot can be stored on the same Outpost as the volume, or in the Region for that Outpost. When a snapshot is created, any Marketplace product codes that are associated with the source volume are propagated to the snapshot. You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your Amazon EBS volume at the time the snapshot command is issued; this might exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending. To create a snapshot for Amazon EBS volumes that serve as root devices, you should stop the instance before taking the snapshot. Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected. You can tag your snapshots during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Amazon Elastic Block Store and Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   createSnapshot(callback?: (err: AWSError, data: EC2.Types.Snapshot) => void): Request<EC2.Types.Snapshot, AWSError>;
   /**
@@ -685,13 +685,21 @@ declare class EC2 extends Service {
    */
   createStoreImageTask(callback?: (err: AWSError, data: EC2.Types.CreateStoreImageTaskResult) => void): Request<EC2.Types.CreateStoreImageTaskResult, AWSError>;
   /**
-   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   AWS reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   Amazon Web Services reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   createSubnet(params: EC2.Types.CreateSubnetRequest, callback?: (err: AWSError, data: EC2.Types.CreateSubnetResult) => void): Request<EC2.Types.CreateSubnetResult, AWSError>;
   /**
-   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   AWS reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Creates a subnet in a specified VPC. You must specify an IPv4 CIDR block for the subnet. After you create a subnet, you can't change its CIDR block. The allowed block size is between a /16 netmask (65,536 IP addresses) and /28 netmask (16 IP addresses). The CIDR block must not overlap with the CIDR block of an existing subnet in the VPC. If you've associated an IPv6 CIDR block with your VPC, you can create a subnet with an IPv6 CIDR block that uses a /64 prefix length.   Amazon Web Services reserves both the first four and the last IPv4 address in each subnet's CIDR block. They're not available for use.  If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle. When you stop an instance in a subnet, it retains its private IPv4 address. It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available. For more information about subnets, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   createSubnet(callback?: (err: AWSError, data: EC2.Types.CreateSubnetResult) => void): Request<EC2.Types.CreateSubnetResult, AWSError>;
+  /**
+   * Creates a subnet CIDR reservation. For information about subnet CIDR reservations, see Subnet CIDR reservations in the Amazon Virtual Private Cloud User Guide.
+   */
+  createSubnetCidrReservation(params: EC2.Types.CreateSubnetCidrReservationRequest, callback?: (err: AWSError, data: EC2.Types.CreateSubnetCidrReservationResult) => void): Request<EC2.Types.CreateSubnetCidrReservationResult, AWSError>;
+  /**
+   * Creates a subnet CIDR reservation. For information about subnet CIDR reservations, see Subnet CIDR reservations in the Amazon Virtual Private Cloud User Guide.
+   */
+  createSubnetCidrReservation(callback?: (err: AWSError, data: EC2.Types.CreateSubnetCidrReservationResult) => void): Request<EC2.Types.CreateSubnetCidrReservationResult, AWSError>;
   /**
    * Adds or overwrites only the specified tags for the specified Amazon EC2 resource or resources. When you specify an existing tag key, the value is overwritten with the new value. Each resource can have a maximum of 50 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource. For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide. For more information about creating IAM policies that control users' access to resources based on tags, see Supported Resource-Level Permissions for Amazon EC2 API Actions in the Amazon Elastic Compute Cloud User Guide.
    */
@@ -805,19 +813,19 @@ declare class EC2 extends Service {
    */
   createTransitGatewayVpcAttachment(callback?: (err: AWSError, data: EC2.Types.CreateTransitGatewayVpcAttachmentResult) => void): Request<EC2.Types.CreateTransitGatewayVpcAttachmentResult, AWSError>;
   /**
-   * Creates an EBS volume that can be attached to an instance in the same Availability Zone. You can create a new empty volume or restore a volume from an EBS snapshot. Any AWS Marketplace product codes from the snapshot are propagated to the volume. You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can tag your volumes during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Creating an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
+   * Creates an EBS volume that can be attached to an instance in the same Availability Zone. You can create a new empty volume or restore a volume from an EBS snapshot. Any Marketplace product codes from the snapshot are propagated to the volume. You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can tag your volumes during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Create an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
    */
   createVolume(params: EC2.Types.CreateVolumeRequest, callback?: (err: AWSError, data: EC2.Types.Volume) => void): Request<EC2.Types.Volume, AWSError>;
   /**
-   * Creates an EBS volume that can be attached to an instance in the same Availability Zone. You can create a new empty volume or restore a volume from an EBS snapshot. Any AWS Marketplace product codes from the snapshot are propagated to the volume. You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can tag your volumes during creation. For more information, see Tagging your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Creating an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
+   * Creates an EBS volume that can be attached to an instance in the same Availability Zone. You can create a new empty volume or restore a volume from an EBS snapshot. Any Marketplace product codes from the snapshot are propagated to the volume. You can create encrypted volumes. Encrypted volumes must be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can tag your volumes during creation. For more information, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide. For more information, see Create an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
    */
   createVolume(callback?: (err: AWSError, data: EC2.Types.Volume) => void): Request<EC2.Types.Volume, AWSError>;
   /**
-   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
    */
   createVpc(params: EC2.Types.CreateVpcRequest, callback?: (err: AWSError, data: EC2.Types.CreateVpcResult) => void): Request<EC2.Types.CreateVpcResult, AWSError>;
   /**
-   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a VPC with the specified IPv4 CIDR block. The smallest VPC you can create uses a /28 netmask (16 IPv4 addresses), and the largest uses a /16 netmask (65,536 IPv4 addresses). For more information about how large to make your VPC, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide. You can optionally request an IPv6 CIDR block for the VPC. You can request an Amazon-provided IPv6 CIDR block from Amazon's pool of IPv6 addresses, or an IPv6 CIDR block from an IPv6 address pool that you provisioned through bring your own IP addresses (BYOIP). By default, each instance you launch in the VPC has the default DHCP options, which include only a default DNS server that we provide (AmazonProvidedDNS). For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide. You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Elastic Compute Cloud User Guide.
    */
   createVpc(callback?: (err: AWSError, data: EC2.Types.CreateVpcResult) => void): Request<EC2.Types.CreateVpcResult, AWSError>;
   /**
@@ -845,11 +853,11 @@ declare class EC2 extends Service {
    */
   createVpcEndpointServiceConfiguration(callback?: (err: AWSError, data: EC2.Types.CreateVpcEndpointServiceConfigurationResult) => void): Request<EC2.Types.CreateVpcEndpointServiceConfigurationResult, AWSError>;
   /**
-   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another AWS account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
+   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
    */
   createVpcPeeringConnection(params: EC2.Types.CreateVpcPeeringConnectionRequest, callback?: (err: AWSError, data: EC2.Types.CreateVpcPeeringConnectionResult) => void): Request<EC2.Types.CreateVpcPeeringConnectionResult, AWSError>;
   /**
-   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another AWS account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
+   * Requests a VPC peering connection between two VPCs: a requester VPC that you own and an accepter VPC with which to create the connection. The accepter VPC can belong to another account and can be in a different Region to the requester VPC. The requester VPC and accepter VPC cannot have overlapping CIDR blocks.  Limitations and rules apply to a VPC peering connection. For more information, see the limitations section in the VPC Peering Guide.  The owner of the accepter VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected. If you create a VPC peering connection request between VPCs with overlapping CIDR blocks, the VPC peering connection has a status of failed.
    */
   createVpcPeeringConnection(callback?: (err: AWSError, data: EC2.Types.CreateVpcPeeringConnectionResult) => void): Request<EC2.Types.CreateVpcPeeringConnectionResult, AWSError>;
   /**
@@ -1109,11 +1117,11 @@ declare class EC2 extends Service {
    */
   deleteSecurityGroup(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the specified snapshot. When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume. You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot. For more information, see Deleting an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
+   * Deletes the specified snapshot. When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume. You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot. For more information, see Delete an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   deleteSnapshot(params: EC2.Types.DeleteSnapshotRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the specified snapshot. When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume. You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot. For more information, see Deleting an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
+   * Deletes the specified snapshot. When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume. You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot. For more information, see Delete an Amazon EBS snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   deleteSnapshot(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -1132,6 +1140,14 @@ declare class EC2 extends Service {
    * Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.
    */
   deleteSubnet(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
+  /**
+   * Deletes a subnet CIDR reservation.
+   */
+  deleteSubnetCidrReservation(params: EC2.Types.DeleteSubnetCidrReservationRequest, callback?: (err: AWSError, data: EC2.Types.DeleteSubnetCidrReservationResult) => void): Request<EC2.Types.DeleteSubnetCidrReservationResult, AWSError>;
+  /**
+   * Deletes a subnet CIDR reservation.
+   */
+  deleteSubnetCidrReservation(callback?: (err: AWSError, data: EC2.Types.DeleteSubnetCidrReservationResult) => void): Request<EC2.Types.DeleteSubnetCidrReservationResult, AWSError>;
   /**
    * Deletes the specified set of tags from the specified set of resources. To list the current tags, use DescribeTags. For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide.
    */
@@ -1245,11 +1261,11 @@ declare class EC2 extends Service {
    */
   deleteTransitGatewayVpcAttachment(callback?: (err: AWSError, data: EC2.Types.DeleteTransitGatewayVpcAttachmentResult) => void): Request<EC2.Types.DeleteTransitGatewayVpcAttachmentResult, AWSError>;
   /**
-   * Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). The volume can remain in the deleting state for several minutes. For more information, see Deleting an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
+   * Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). The volume can remain in the deleting state for several minutes. For more information, see Delete an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
    */
   deleteVolume(params: EC2.Types.DeleteVolumeRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). The volume can remain in the deleting state for several minutes. For more information, see Deleting an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
+   * Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance). The volume can remain in the deleting state for several minutes. For more information, see Delete an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
    */
   deleteVolume(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -1501,11 +1517,11 @@ declare class EC2 extends Service {
    */
   describeCustomerGateways(callback?: (err: AWSError, data: EC2.Types.DescribeCustomerGatewaysResult) => void): Request<EC2.Types.DescribeCustomerGatewaysResult, AWSError>;
   /**
-   * Describes one or more of your DHCP options sets. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your DHCP options sets. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   describeDhcpOptions(params: EC2.Types.DescribeDhcpOptionsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeDhcpOptionsResult) => void): Request<EC2.Types.DescribeDhcpOptionsResult, AWSError>;
   /**
-   * Describes one or more of your DHCP options sets. For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your DHCP options sets. For more information, see DHCP options sets in the Amazon Virtual Private Cloud User Guide.
    */
   describeDhcpOptions(callback?: (err: AWSError, data: EC2.Types.DescribeDhcpOptionsResult) => void): Request<EC2.Types.DescribeDhcpOptionsResult, AWSError>;
   /**
@@ -1981,11 +1997,11 @@ declare class EC2 extends Service {
    */
   describeReservedInstancesOfferings(callback?: (err: AWSError, data: EC2.Types.DescribeReservedInstancesOfferingsResult) => void): Request<EC2.Types.DescribeReservedInstancesOfferingsResult, AWSError>;
   /**
-   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   describeRouteTables(params: EC2.Types.DescribeRouteTablesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeRouteTablesResult) => void): Request<EC2.Types.DescribeRouteTablesResult, AWSError>;
   /**
-   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your route tables. Each subnet in your VPC must be associated with a route table. If a subnet is not explicitly associated with any route table, it is implicitly associated with the main route table. This command does not return the subnet ID for implicit associations. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   describeRouteTables(callback?: (err: AWSError, data: EC2.Types.DescribeRouteTablesResult) => void): Request<EC2.Types.DescribeRouteTablesResult, AWSError>;
   /**
@@ -2037,11 +2053,11 @@ declare class EC2 extends Service {
    */
   describeSnapshotAttribute(callback?: (err: AWSError, data: EC2.Types.DescribeSnapshotAttributeResult) => void): Request<EC2.Types.DescribeSnapshotAttributeResult, AWSError>;
   /**
-   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other AWS accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All AWS accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific AWS account.    implicit: An AWS account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or AWS accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the AWS account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify AWS account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
+   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific account.    implicit: An account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
    */
   describeSnapshots(params: EC2.Types.DescribeSnapshotsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeSnapshotsResult) => void): Request<EC2.Types.DescribeSnapshotsResult, AWSError>;
   /**
-   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other AWS accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All AWS accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific AWS account.    implicit: An AWS account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or AWS accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the AWS account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify AWS account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
+   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific account.    implicit: An account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. The MaxResults parameter sets the maximum number of results returned in a single page. If the list of results exceeds your MaxResults value, then that number of results is returned along with a NextToken value that can be passed to a subsequent DescribeSnapshots request to retrieve the remaining results. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon Elastic Compute Cloud User Guide.
    */
   describeSnapshots(callback?: (err: AWSError, data: EC2.Types.DescribeSnapshotsResult) => void): Request<EC2.Types.DescribeSnapshotsResult, AWSError>;
   /**
@@ -2109,11 +2125,11 @@ declare class EC2 extends Service {
    */
   describeStoreImageTasks(callback?: (err: AWSError, data: EC2.Types.DescribeStoreImageTasksResult) => void): Request<EC2.Types.DescribeStoreImageTasksResult, AWSError>;
   /**
-   * Describes one or more of your subnets. For more information, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your subnets. For more information, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   describeSubnets(params: EC2.Types.DescribeSubnetsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeSubnetsResult) => void): Request<EC2.Types.DescribeSubnetsResult, AWSError>;
   /**
-   * Describes one or more of your subnets. For more information, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.
+   * Describes one or more of your subnets. For more information, see Your VPC and subnets in the Amazon Virtual Private Cloud User Guide.
    */
   describeSubnets(callback?: (err: AWSError, data: EC2.Types.DescribeSubnetsResult) => void): Request<EC2.Types.DescribeSubnetsResult, AWSError>;
   /**
@@ -2229,11 +2245,11 @@ declare class EC2 extends Service {
    */
   describeVolumeAttribute(callback?: (err: AWSError, data: EC2.Types.DescribeVolumeAttributeResult) => void): Request<EC2.Types.DescribeVolumeAttributeResult, AWSError>;
   /**
-   * Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event. The DescribeVolumeStatus operation provides the following information about the specified volumes:  Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitoring the status of your volumes in the Amazon Elastic Compute Cloud User Guide.  Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.  Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency. Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)
+   * Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event. The DescribeVolumeStatus operation provides the following information about the specified volumes:  Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitor the status of your volumes in the Amazon Elastic Compute Cloud User Guide.  Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.  Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency. Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)
    */
   describeVolumeStatus(params: EC2.Types.DescribeVolumeStatusRequest, callback?: (err: AWSError, data: EC2.Types.DescribeVolumeStatusResult) => void): Request<EC2.Types.DescribeVolumeStatusResult, AWSError>;
   /**
-   * Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event. The DescribeVolumeStatus operation provides the following information about the specified volumes:  Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitoring the status of your volumes in the Amazon Elastic Compute Cloud User Guide.  Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.  Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency. Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)
+   * Describes the status of the specified volumes. Volume status provides the result of the checks performed on your volumes to determine events that can impair the performance of your volumes. The performance of a volume can be affected if an issue occurs on the volume's underlying host. If the volume's underlying host experiences a power outage or system issue, after the system is restored, there could be data inconsistencies on the volume. Volume events notify you if this occurs. Volume actions notify you if any action needs to be taken in response to the event. The DescribeVolumeStatus operation provides the following information about the specified volumes:  Status: Reflects the current status of the volume. The possible values are ok, impaired , warning, or insufficient-data. If all checks pass, the overall status of the volume is ok. If the check fails, the overall status is impaired. If the status is insufficient-data, then the checks might still be taking place on your volume at the time. We recommend that you retry the request. For more information about volume status, see Monitor the status of your volumes in the Amazon Elastic Compute Cloud User Guide.  Events: Reflect the cause of a volume status and might require you to take action. For example, if your volume returns an impaired status, then the volume event might be potential-data-inconsistency. This means that your volume has been affected by an issue with the underlying host, has all I/O operations disabled, and might have inconsistent data.  Actions: Reflect the actions you might have to take in response to an event. For example, if the status of the volume is impaired and the volume event shows potential-data-inconsistency, then the action shows enable-volume-io. This means that you may want to enable the I/O operations for the volume by calling the EnableVolumeIO action and then check the volume for data consistency. Volume status is based on the volume status checks, and does not reflect the volume state. Therefore, volume status does not indicate volumes in the error state (for example, when a volume is incapable of accepting I/O.)
    */
   describeVolumeStatus(callback?: (err: AWSError, data: EC2.Types.DescribeVolumeStatusResult) => void): Request<EC2.Types.DescribeVolumeStatusResult, AWSError>;
   /**
@@ -2245,11 +2261,11 @@ declare class EC2 extends Service {
    */
   describeVolumes(callback?: (err: AWSError, data: EC2.Types.DescribeVolumesResult) => void): Request<EC2.Types.DescribeVolumesResult, AWSError>;
   /**
-   * Describes the most recent volume modification request for the specified EBS volumes. If a volume has never been modified, some information in the output will be null. If a volume has been modified more than once, the output includes only the most recent modification request. You can also use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. For more information, see Monitoring volume modifications in the Amazon Elastic Compute Cloud User Guide.
+   * Describes the most recent volume modification request for the specified EBS volumes. If a volume has never been modified, some information in the output will be null. If a volume has been modified more than once, the output includes only the most recent modification request. You can also use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. For more information, see Monitor the progress of volume modifications in the Amazon Elastic Compute Cloud User Guide.
    */
   describeVolumesModifications(params: EC2.Types.DescribeVolumesModificationsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeVolumesModificationsResult) => void): Request<EC2.Types.DescribeVolumesModificationsResult, AWSError>;
   /**
-   * Describes the most recent volume modification request for the specified EBS volumes. If a volume has never been modified, some information in the output will be null. If a volume has been modified more than once, the output includes only the most recent modification request. You can also use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. For more information, see Monitoring volume modifications in the Amazon Elastic Compute Cloud User Guide.
+   * Describes the most recent volume modification request for the specified EBS volumes. If a volume has never been modified, some information in the output will be null. If a volume has been modified more than once, the output includes only the most recent modification request. You can also use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. For more information, see Monitor the progress of volume modifications in the Amazon Elastic Compute Cloud User Guide.
    */
   describeVolumesModifications(callback?: (err: AWSError, data: EC2.Types.DescribeVolumesModificationsResult) => void): Request<EC2.Types.DescribeVolumesModificationsResult, AWSError>;
   /**
@@ -2381,11 +2397,11 @@ declare class EC2 extends Service {
    */
   detachNetworkInterface(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first. When a volume with an AWS Marketplace product code is detached from an instance, the product code is no longer associated with the instance. For more information, see Detaching an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
+   * Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first. When a volume with an Marketplace product code is detached from an instance, the product code is no longer associated with the instance. For more information, see Detach an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
    */
   detachVolume(params: EC2.Types.DetachVolumeRequest, callback?: (err: AWSError, data: EC2.Types.VolumeAttachment) => void): Request<EC2.Types.VolumeAttachment, AWSError>;
   /**
-   * Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first. When a volume with an AWS Marketplace product code is detached from an instance, the product code is no longer associated with the instance. For more information, see Detaching an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
+   * Detaches an EBS volume from an instance. Make sure to unmount any file systems on the device within your operating system before detaching the volume. Failure to do so can result in the volume becoming stuck in the busy state while detaching. If this happens, detachment can be delayed indefinitely until you unmount the volume, force detachment, reboot the instance, or all three. If an EBS volume is the root device of an instance, it can't be detached while the instance is running. To detach the root volume, stop the instance first. When a volume with an Marketplace product code is detached from an instance, the product code is no longer associated with the instance. For more information, see Detach an Amazon EBS volume in the Amazon Elastic Compute Cloud User Guide.
    */
   detachVolume(callback?: (err: AWSError, data: EC2.Types.VolumeAttachment) => void): Request<EC2.Types.VolumeAttachment, AWSError>;
   /**
@@ -2501,11 +2517,11 @@ declare class EC2 extends Service {
    */
   disassociateInstanceEventWindow(callback?: (err: AWSError, data: EC2.Types.DisassociateInstanceEventWindowResult) => void): Request<EC2.Types.DisassociateInstanceEventWindowResult, AWSError>;
   /**
-   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   disassociateRouteTable(params: EC2.Types.DisassociateRouteTableRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Disassociates a subnet or gateway from a route table. After you perform this action, the subnet no longer uses the routes in the route table. Instead, it uses the routes in the VPC's main route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   disassociateRouteTable(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -2549,11 +2565,11 @@ declare class EC2 extends Service {
    */
   disassociateVpcCidrBlock(callback?: (err: AWSError, data: EC2.Types.DisassociateVpcCidrBlockResult) => void): Request<EC2.Types.DisassociateVpcCidrBlockResult, AWSError>;
   /**
-   * Enables EBS encryption by default for your account in the current Region. After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default CMK or the CMK that you specified when you created each volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can specify the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. Enabling encryption by default has no effect on the encryption status of your existing volumes. After you enable encryption by default, you can no longer launch instances using instance types that do not support encryption. For more information, see Supported instance types.
+   * Enables EBS encryption by default for your account in the current Region. After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default KMS key or the KMS key that you specified when you created each volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can specify the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. Enabling encryption by default has no effect on the encryption status of your existing volumes. After you enable encryption by default, you can no longer launch instances using instance types that do not support encryption. For more information, see Supported instance types.
    */
   enableEbsEncryptionByDefault(params: EC2.Types.EnableEbsEncryptionByDefaultRequest, callback?: (err: AWSError, data: EC2.Types.EnableEbsEncryptionByDefaultResult) => void): Request<EC2.Types.EnableEbsEncryptionByDefaultResult, AWSError>;
   /**
-   * Enables EBS encryption by default for your account in the current Region. After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default CMK or the CMK that you specified when you created each volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can specify the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. Enabling encryption by default has no effect on the encryption status of your existing volumes. After you enable encryption by default, you can no longer launch instances using instance types that do not support encryption. For more information, see Supported instance types.
+   * Enables EBS encryption by default for your account in the current Region. After you enable encryption by default, the EBS volumes that you create are always encrypted, either using the default KMS key or the KMS key that you specified when you created each volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide. You can specify the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. Enabling encryption by default has no effect on the encryption status of your existing volumes. After you enable encryption by default, you can no longer launch instances using instance types that do not support encryption. For more information, see Supported instance types.
    */
   enableEbsEncryptionByDefault(callback?: (err: AWSError, data: EC2.Types.EnableEbsEncryptionByDefaultResult) => void): Request<EC2.Types.EnableEbsEncryptionByDefaultResult, AWSError>;
   /**
@@ -2709,11 +2725,11 @@ declare class EC2 extends Service {
    */
   getDefaultCreditSpecification(callback?: (err: AWSError, data: EC2.Types.GetDefaultCreditSpecificationResult) => void): Request<EC2.Types.GetDefaultCreditSpecificationResult, AWSError>;
   /**
-   * Describes the default customer master key (CMK) for EBS encryption by default for your account in this Region. You can change the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Describes the default KMS key for EBS encryption by default for your account in this Region. You can change the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   getEbsDefaultKmsKeyId(params: EC2.Types.GetEbsDefaultKmsKeyIdRequest, callback?: (err: AWSError, data: EC2.Types.GetEbsDefaultKmsKeyIdResult) => void): Request<EC2.Types.GetEbsDefaultKmsKeyIdResult, AWSError>;
   /**
-   * Describes the default customer master key (CMK) for EBS encryption by default for your account in this Region. You can change the default CMK for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Describes the default KMS key for EBS encryption by default for your account in this Region. You can change the default KMS key for encryption by default using ModifyEbsDefaultKmsKeyId or ResetEbsDefaultKmsKeyId. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   getEbsDefaultKmsKeyId(callback?: (err: AWSError, data: EC2.Types.GetEbsDefaultKmsKeyIdResult) => void): Request<EC2.Types.GetEbsDefaultKmsKeyIdResult, AWSError>;
   /**
@@ -2796,6 +2812,14 @@ declare class EC2 extends Service {
    * Retrieves the access status of your account to the EC2 serial console of all instances. By default, access to the EC2 serial console is disabled for your account. For more information, see Manage account access to the EC2 serial console in the Amazon EC2 User Guide.
    */
   getSerialConsoleAccessStatus(callback?: (err: AWSError, data: EC2.Types.GetSerialConsoleAccessStatusResult) => void): Request<EC2.Types.GetSerialConsoleAccessStatusResult, AWSError>;
+  /**
+   * Gets information about the subnet CIDR reservations.
+   */
+  getSubnetCidrReservations(params: EC2.Types.GetSubnetCidrReservationsRequest, callback?: (err: AWSError, data: EC2.Types.GetSubnetCidrReservationsResult) => void): Request<EC2.Types.GetSubnetCidrReservationsResult, AWSError>;
+  /**
+   * Gets information about the subnet CIDR reservations.
+   */
+  getSubnetCidrReservations(callback?: (err: AWSError, data: EC2.Types.GetSubnetCidrReservationsResult) => void): Request<EC2.Types.GetSubnetCidrReservationsResult, AWSError>;
   /**
    * Lists the route tables to which the specified resource attachment propagates routes.
    */
@@ -2925,11 +2949,11 @@ declare class EC2 extends Service {
    */
   modifyDefaultCreditSpecification(callback?: (err: AWSError, data: EC2.Types.ModifyDefaultCreditSpecificationResult) => void): Request<EC2.Types.ModifyDefaultCreditSpecificationResult, AWSError>;
   /**
-   * Changes the default customer master key (CMK) for EBS encryption by default for your account in this Region. AWS creates a unique AWS managed CMK in each Region for use with encryption by default. If you change the default CMK to a symmetric customer managed CMK, it is used instead of the AWS managed CMK. To reset the default CMK to the AWS managed CMK for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does not support asymmetric CMKs. If you delete or disable the customer managed CMK that you specified for use with encryption by default, your instances will fail to launch. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Changes the default KMS key for EBS encryption by default for your account in this Region. Amazon Web Services creates a unique Amazon Web Services managed KMS key in each Region for use with encryption by default. If you change the default KMS key to a symmetric customer managed KMS key, it is used instead of the Amazon Web Services managed KMS key. To reset the default KMS key to the Amazon Web Services managed KMS key for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does not support asymmetric KMS keys. If you delete or disable the customer managed KMS key that you specified for use with encryption by default, your instances will fail to launch. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   modifyEbsDefaultKmsKeyId(params: EC2.Types.ModifyEbsDefaultKmsKeyIdRequest, callback?: (err: AWSError, data: EC2.Types.ModifyEbsDefaultKmsKeyIdResult) => void): Request<EC2.Types.ModifyEbsDefaultKmsKeyIdResult, AWSError>;
   /**
-   * Changes the default customer master key (CMK) for EBS encryption by default for your account in this Region. AWS creates a unique AWS managed CMK in each Region for use with encryption by default. If you change the default CMK to a symmetric customer managed CMK, it is used instead of the AWS managed CMK. To reset the default CMK to the AWS managed CMK for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does not support asymmetric CMKs. If you delete or disable the customer managed CMK that you specified for use with encryption by default, your instances will fail to launch. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Changes the default KMS key for EBS encryption by default for your account in this Region. Amazon Web Services creates a unique Amazon Web Services managed KMS key in each Region for use with encryption by default. If you change the default KMS key to a symmetric customer managed KMS key, it is used instead of the Amazon Web Services managed KMS key. To reset the default KMS key to the Amazon Web Services managed KMS key for EBS, use ResetEbsDefaultKmsKeyId. Amazon EBS does not support asymmetric KMS keys. If you delete or disable the customer managed KMS key that you specified for use with encryption by default, your instances will fail to launch. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   modifyEbsDefaultKmsKeyId(callback?: (err: AWSError, data: EC2.Types.ModifyEbsDefaultKmsKeyIdResult) => void): Request<EC2.Types.ModifyEbsDefaultKmsKeyIdResult, AWSError>;
   /**
@@ -3077,11 +3101,11 @@ declare class EC2 extends Service {
    */
   modifySecurityGroupRules(callback?: (err: AWSError, data: EC2.Types.ModifySecurityGroupRulesResult) => void): Request<EC2.Types.ModifySecurityGroupRulesResult, AWSError>;
   /**
-   * Adds or removes permission settings for the specified snapshot. You may add or remove specified AWS account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must use multiple operations. You can make up to 500 modifications to a snapshot in a single operation. Encrypted snapshots and snapshots with AWS Marketplace product codes cannot be made public. Snapshots encrypted with your default CMK cannot be shared with other accounts. For more information about modifying snapshot permissions, see Sharing snapshots in the Amazon Elastic Compute Cloud User Guide.
+   * Adds or removes permission settings for the specified snapshot. You may add or remove specified account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must use multiple operations. You can make up to 500 modifications to a snapshot in a single operation. Encrypted snapshots and snapshots with Marketplace product codes cannot be made public. Snapshots encrypted with your default KMS key cannot be shared with other accounts. For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   modifySnapshotAttribute(params: EC2.Types.ModifySnapshotAttributeRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Adds or removes permission settings for the specified snapshot. You may add or remove specified AWS account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must use multiple operations. You can make up to 500 modifications to a snapshot in a single operation. Encrypted snapshots and snapshots with AWS Marketplace product codes cannot be made public. Snapshots encrypted with your default CMK cannot be shared with other accounts. For more information about modifying snapshot permissions, see Sharing snapshots in the Amazon Elastic Compute Cloud User Guide.
+   * Adds or removes permission settings for the specified snapshot. You may add or remove specified account IDs from a snapshot's list of create volume permissions, but you cannot do both in a single operation. If you need to both add and remove account IDs for a snapshot, you must use multiple operations. You can make up to 500 modifications to a snapshot in a single operation. Encrypted snapshots and snapshots with Marketplace product codes cannot be made public. Snapshots encrypted with your default KMS key cannot be shared with other accounts. For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   modifySnapshotAttribute(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -3149,11 +3173,11 @@ declare class EC2 extends Service {
    */
   modifyTransitGatewayVpcAttachment(callback?: (err: AWSError, data: EC2.Types.ModifyTransitGatewayVpcAttachmentResult) => void): Request<EC2.Types.ModifyTransitGatewayVpcAttachmentResult, AWSError>;
   /**
-   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying an EBS volume running Linux, see Modifying the size, IOPS, or type of an EBS volume on Linux. For more information about modifying an EBS volume running Windows, see Modifying the size, IOPS, or type of an EBS volume on Windows.  When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For information about extending a Linux file system, see Extending a Linux file system. For information about extending a Windows file system, see Extending a Windows file system.   You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitoring volume modifications.  With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. For more information, see Amazon EBS Elastic Volumes (Linux) or Amazon EBS Elastic Volumes (Windows). If you reach the maximum volume modification rate per volume limit, you will need to wait at least six hours before applying further modifications to the affected EBS volume.
+   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances). When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.  You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications. With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. If you reach the maximum volume modification rate per volume limit, you must wait at least six hours before applying further modifications to the affected EBS volume.
    */
   modifyVolume(params: EC2.Types.ModifyVolumeRequest, callback?: (err: AWSError, data: EC2.Types.ModifyVolumeResult) => void): Request<EC2.Types.ModifyVolumeResult, AWSError>;
   /**
-   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying an EBS volume running Linux, see Modifying the size, IOPS, or type of an EBS volume on Linux. For more information about modifying an EBS volume running Windows, see Modifying the size, IOPS, or type of an EBS volume on Windows.  When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For information about extending a Linux file system, see Extending a Linux file system. For information about extending a Windows file system, see Extending a Windows file system.   You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitoring volume modifications.  With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. For more information, see Amazon EBS Elastic Volumes (Linux) or Amazon EBS Elastic Volumes (Windows). If you reach the maximum volume modification rate per volume limit, you will need to wait at least six hours before applying further modifications to the affected EBS volume.
+   * You can modify several parameters of an existing EBS volume, including volume size, volume type, and IOPS capacity. If your EBS volume is attached to a current-generation EC2 instance type, you might be able to apply these changes without stopping the instance or detaching the volume from it. For more information about modifying EBS volumes, see Amazon EBS Elastic Volumes (Linux instances) or Amazon EBS Elastic Volumes (Windows instances). When you complete a resize operation on your volume, you need to extend the volume's file-system size to take advantage of the new storage capacity. For more information, see Extend a Linux file system or Extend a Windows file system.  You can use CloudWatch Events to check the status of a modification to an EBS volume. For information about CloudWatch Events, see the Amazon CloudWatch Events User Guide. You can also track the status of a modification using DescribeVolumesModifications. For information about tracking status changes using either method, see Monitor the progress of volume modifications. With previous-generation instance types, resizing an EBS volume might require detaching and reattaching the volume or stopping and restarting the instance. If you reach the maximum volume modification rate per volume limit, you must wait at least six hours before applying further modifications to the affected EBS volume.
    */
   modifyVolume(callback?: (err: AWSError, data: EC2.Types.ModifyVolumeResult) => void): Request<EC2.Types.ModifyVolumeResult, AWSError>;
   /**
@@ -3205,11 +3229,11 @@ declare class EC2 extends Service {
    */
   modifyVpcEndpointServicePermissions(callback?: (err: AWSError, data: EC2.Types.ModifyVpcEndpointServicePermissionsResult) => void): Request<EC2.Types.ModifyVpcEndpointServicePermissionsResult, AWSError>;
   /**
-   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same AWS account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different AWS accounts or different Regions. For peered VPCs in different AWS accounts, each AWS account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
+   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different different accounts or different Regions. For peered VPCs in different accounts, each account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
    */
   modifyVpcPeeringConnectionOptions(params: EC2.Types.ModifyVpcPeeringConnectionOptionsRequest, callback?: (err: AWSError, data: EC2.Types.ModifyVpcPeeringConnectionOptionsResult) => void): Request<EC2.Types.ModifyVpcPeeringConnectionOptionsResult, AWSError>;
   /**
-   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same AWS account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different AWS accounts or different Regions. For peered VPCs in different AWS accounts, each AWS account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
+   * Modifies the VPC peering connection options on one side of a VPC peering connection. You can do the following:   Enable/disable communication over the peering connection between an EC2-Classic instance that's linked to your VPC (using ClassicLink) and instances in the peer VPC.   Enable/disable communication over the peering connection between instances in your VPC and an EC2-Classic instance that's linked to the peer VPC.   Enable/disable the ability to resolve public DNS hostnames to private IP addresses when queried from instances in the peer VPC.   If the peered VPCs are in the same account, you can enable DNS resolution for queries from the local VPC. This ensures that queries from the local VPC resolve to private IP addresses in the peer VPC. This option is not available if the peered VPCs are in different different accounts or different Regions. For peered VPCs in different accounts, each account owner must initiate a separate request to modify the peering connection options. For inter-region peering connections, you must use the Region for the requester VPC to modify the requester VPC peering options and the Region for the accepter VPC to modify the accepter VPC peering options. To verify which VPCs are the accepter and the requester for a VPC peering connection, use the DescribeVpcPeeringConnections command.
    */
   modifyVpcPeeringConnectionOptions(callback?: (err: AWSError, data: EC2.Types.ModifyVpcPeeringConnectionOptionsResult) => void): Request<EC2.Types.ModifyVpcPeeringConnectionOptionsResult, AWSError>;
   /**
@@ -3421,19 +3445,19 @@ declare class EC2 extends Service {
    */
   replaceNetworkAclEntry(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   replaceRoute(params: EC2.Types.ReplaceRouteRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route Tables in the Amazon Virtual Private Cloud User Guide.
+   * Replaces an existing route within a route table in a VPC. You must provide only one of the following: internet gateway, virtual private gateway, NAT instance, NAT gateway, VPC peering connection, network interface, egress-only internet gateway, or transit gateway. For more information, see Route tables in the Amazon Virtual Private Cloud User Guide.
    */
   replaceRoute(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
+   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
    */
   replaceRouteTableAssociation(params: EC2.Types.ReplaceRouteTableAssociationRequest, callback?: (err: AWSError, data: EC2.Types.ReplaceRouteTableAssociationResult) => void): Request<EC2.Types.ReplaceRouteTableAssociationResult, AWSError>;
   /**
-   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
+   * Changes the route table associated with a given subnet, internet gateway, or virtual private gateway in a VPC. After the operation completes, the subnet or gateway uses the routes in the new route table. For more information about route tables, see Route tables in the Amazon Virtual Private Cloud User Guide. You can also use this operation to change which table is the main route table in the VPC. Specify the main route table's association ID and the route table ID of the new main route table.
    */
   replaceRouteTableAssociation(callback?: (err: AWSError, data: EC2.Types.ReplaceRouteTableAssociationResult) => void): Request<EC2.Types.ReplaceRouteTableAssociationResult, AWSError>;
   /**
@@ -3477,11 +3501,11 @@ declare class EC2 extends Service {
    */
   resetAddressAttribute(callback?: (err: AWSError, data: EC2.Types.ResetAddressAttributeResult) => void): Request<EC2.Types.ResetAddressAttributeResult, AWSError>;
   /**
-   * Resets the default customer master key (CMK) for EBS encryption for your account in this Region to the AWS managed CMK for EBS. After resetting the default CMK to the AWS managed CMK, you can continue to encrypt by a customer managed CMK by specifying it when you create the volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Resets the default KMS key for EBS encryption for your account in this Region to the Amazon Web Services managed KMS key for EBS. After resetting the default KMS key to the Amazon Web Services managed KMS key, you can continue to encrypt by a customer managed KMS key by specifying it when you create the volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   resetEbsDefaultKmsKeyId(params: EC2.Types.ResetEbsDefaultKmsKeyIdRequest, callback?: (err: AWSError, data: EC2.Types.ResetEbsDefaultKmsKeyIdResult) => void): Request<EC2.Types.ResetEbsDefaultKmsKeyIdResult, AWSError>;
   /**
-   * Resets the default customer master key (CMK) for EBS encryption for your account in this Region to the AWS managed CMK for EBS. After resetting the default CMK to the AWS managed CMK, you can continue to encrypt by a customer managed CMK by specifying it when you create the volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
+   * Resets the default KMS key for EBS encryption for your account in this Region to the Amazon Web Services managed KMS key for EBS. After resetting the default KMS key to the Amazon Web Services managed KMS key, you can continue to encrypt by a customer managed KMS key by specifying it when you create the volume. For more information, see Amazon EBS encryption in the Amazon Elastic Compute Cloud User Guide.
    */
   resetEbsDefaultKmsKeyId(callback?: (err: AWSError, data: EC2.Types.ResetEbsDefaultKmsKeyIdResult) => void): Request<EC2.Types.ResetEbsDefaultKmsKeyIdResult, AWSError>;
   /**
@@ -3517,11 +3541,11 @@ declare class EC2 extends Service {
    */
   resetNetworkInterfaceAttribute(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Resets permission settings for the specified snapshot. For more information about modifying snapshot permissions, see Sharing snapshots in the Amazon Elastic Compute Cloud User Guide.
+   * Resets permission settings for the specified snapshot. For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   resetSnapshotAttribute(params: EC2.Types.ResetSnapshotAttributeRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Resets permission settings for the specified snapshot. For more information about modifying snapshot permissions, see Sharing snapshots in the Amazon Elastic Compute Cloud User Guide.
+   * Resets permission settings for the specified snapshot. For more information about modifying snapshot permissions, see Share a snapshot in the Amazon Elastic Compute Cloud User Guide.
    */
   resetSnapshotAttribute(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -3661,19 +3685,19 @@ declare class EC2 extends Service {
    */
   terminateInstances(callback?: (err: AWSError, data: EC2.Types.TerminateInstancesResult) => void): Request<EC2.Types.TerminateInstancesResult, AWSError>;
   /**
-   * Unassigns one or more IPv6 addresses from a network interface.
+   * Unassigns one or more IPv6 addresses IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignIpv6Addresses(params: EC2.Types.UnassignIpv6AddressesRequest, callback?: (err: AWSError, data: EC2.Types.UnassignIpv6AddressesResult) => void): Request<EC2.Types.UnassignIpv6AddressesResult, AWSError>;
   /**
-   * Unassigns one or more IPv6 addresses from a network interface.
+   * Unassigns one or more IPv6 addresses IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignIpv6Addresses(callback?: (err: AWSError, data: EC2.Types.UnassignIpv6AddressesResult) => void): Request<EC2.Types.UnassignIpv6AddressesResult, AWSError>;
   /**
-   * Unassigns one or more secondary private IP addresses from a network interface.
+   * Unassigns one or more secondary private IP addresses, or IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignPrivateIpAddresses(params: EC2.Types.UnassignPrivateIpAddressesRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Unassigns one or more secondary private IP addresses from a network interface.
+   * Unassigns one or more secondary private IP addresses, or IPv4 Prefix Delegation prefixes from a network interface.
    */
   unassignPrivateIpAddresses(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -4448,7 +4472,7 @@ declare namespace EC2 {
      */
     DestinationCidr?: String;
     /**
-     * The prefix of the AWS service.
+     * The prefix of the Amazon Web Service.
      */
     DestinationPrefixListId?: String;
     /**
@@ -4549,6 +4573,14 @@ declare namespace EC2 {
      * One or more specific IPv6 addresses to be assigned to the network interface. You can't use this option if you're specifying a number of IPv6 addresses.
      */
     Ipv6Addresses?: Ipv6AddressList;
+    /**
+     * The number of IPv6 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
+     */
+    Ipv6PrefixCount?: Integer;
+    /**
+     * One or more IPv6 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: IpPrefixList;
     /**
      * The ID of the network interface.
      */
@@ -4559,6 +4591,10 @@ declare namespace EC2 {
      * The new IPv6 addresses assigned to the network interface. Existing IPv6 addresses that were assigned to the network interface before the request are not included.
      */
     AssignedIpv6Addresses?: Ipv6AddressList;
+    /**
+     * The IPv6 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    AssignedIpv6Prefixes?: IpPrefixList;
     /**
      * The ID of the network interface.
      */
@@ -4581,6 +4617,14 @@ declare namespace EC2 {
      * The number of secondary IP addresses to assign to the network interface. You can't specify this parameter when also specifying private IP addresses.
      */
     SecondaryPrivateIpAddressCount?: Integer;
+    /**
+     * One or more IPv4 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: IpPrefixList;
+    /**
+     * The number of IPv4 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv4 Prefixes option.
+     */
+    Ipv4PrefixCount?: Integer;
   }
   export interface AssignPrivateIpAddressesResult {
     /**
@@ -4591,6 +4635,10 @@ declare namespace EC2 {
      * The private IP addresses assigned to the network interface.
      */
     AssignedPrivateIpAddresses?: AssignedPrivateIpAddressList;
+    /**
+     * The IPv4 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    AssignedIpv4Prefixes?: Ipv4PrefixesList;
   }
   export interface AssignedPrivateIpAddress {
     /**
@@ -5806,7 +5854,7 @@ declare namespace EC2 {
      */
     State?: CarrierGatewayState;
     /**
-     * The AWS account ID of the owner of the carrier gateway.
+     * The account ID of the owner of the carrier gateway.
      */
     OwnerId?: String;
     /**
@@ -6467,11 +6515,11 @@ declare namespace EC2 {
      */
     Description?: String;
     /**
-     * The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an AWS Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost. For more information, see  Copying snapshots from an AWS Region to an Outpost in the Amazon Elastic Compute Cloud User Guide.
+     * The Amazon Resource Name (ARN) of the Outpost to which to copy the snapshot. Only specify this parameter when copying a snapshot from an Amazon Web Services Region to an Outpost. The snapshot must be in the Region for the destination Outpost. You cannot copy a snapshot from an Outpost to a Region, from one Outpost to another, or within the same Outpost. For more information, see  Copy snapshots from an Amazon Web Services Region to an Outpost in the Amazon Elastic Compute Cloud User Guide.
      */
     DestinationOutpostArn?: String;
     /**
-     * The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required. The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com). With the AWS CLI, this is specified using the --region parameter or the default Region in your AWS configuration file.
+     * The destination Region to use in the PresignedUrl parameter of a snapshot copy operation. This parameter is only valid for specifying the destination Region in a PresignedUrl parameter, where it is required. The snapshot copy is sent to the regional endpoint that you sent the HTTP request to (for example, ec2.us-east-1.amazonaws.com). With the CLI, this is specified using the --region parameter or the default Region in your Amazon Web Services configuration file.
      */
     DestinationRegion?: String;
     /**
@@ -6479,11 +6527,11 @@ declare namespace EC2 {
      */
     Encrypted?: Boolean;
     /**
-     * The identifier of the AWS Key Management Service (AWS KMS) customer master key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted state must be true. You can specify the CMK using any of the following:   Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.   Key alias. For example, alias/ExampleAlias.   Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.   Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.   AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
+     * The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true. You can specify the KMS key using any of the following:   Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.   Key alias. For example, alias/ExampleAlias.   Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.   Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.   Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
      */
     KmsKeyId?: KmsKeyId;
     /**
-     * When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests. The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The PresignedUrl must be signed using AWS Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (AWS Signature Version 4) in the Amazon Simple Storage Service API Reference. An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.
+     * When you copy an encrypted source snapshot using the Amazon EC2 Query API, you must supply a pre-signed URL. This parameter is optional for unencrypted snapshots. For more information, see Query requests. The PresignedUrl should use the snapshot source endpoint, the CopySnapshot action, and include the SourceRegion, SourceSnapshotId, and DestinationRegion parameters. The PresignedUrl must be signed using Amazon Web Services Signature Version 4. Because EBS snapshots are stored in Amazon S3, the signing algorithm for this parameter uses the same logic that is described in Authenticating Requests: Using Query Parameters (Amazon Web Services Signature Version 4) in the Amazon Simple Storage Service API Reference. An invalid or improperly signed PresignedUrl will cause the copy operation to fail asynchronously, and the snapshot will move to an error state.
      */
     PresignedUrl?: String;
     /**
@@ -6618,7 +6666,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
   }
@@ -6826,7 +6874,7 @@ declare namespace EC2 {
   }
   export interface CreateEgressOnlyInternetGatewayRequest {
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
     /**
@@ -6972,7 +7020,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken?: String;
     /**
@@ -7004,7 +7052,7 @@ declare namespace EC2 {
      */
     LogDestination?: String;
     /**
-     * The fields to include in the flow log record, in the order in which they should appear. For a list of available fields, see Flow Log Records. If you omit this parameter, the flow log is created using the default format. If you specify this parameter, you must specify at least one field. Specify the fields using the ${field-id} format, separated by spaces. For the AWS CLI, use single quotation marks (' ') to surround the parameter value.
+     * The fields to include in the flow log record, in the order in which they should appear. For a list of available fields, see Flow log records. If you omit this parameter, the flow log is created using the default format. If you specify this parameter, you must specify at least one field. Specify the fields using the ${field-id} format, separated by spaces. For the CLI, use single quotation marks (' ') to surround the parameter value.
      */
     LogFormat?: String;
     /**
@@ -7358,7 +7406,7 @@ declare namespace EC2 {
      */
     AllocationId?: AllocationId;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency. Constraint: Maximum 64 ASCII characters.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency. Constraint: Maximum 64 ASCII characters.
      */
     ClientToken?: String;
     /**
@@ -7452,19 +7500,19 @@ declare namespace EC2 {
   }
   export interface CreateNetworkInsightsPathRequest {
     /**
-     * The IP address of the AWS resource that is the source of the path.
+     * The IP address of the Amazon Web Services resource that is the source of the path.
      */
     SourceIp?: IpAddress;
     /**
-     * The IP address of the AWS resource that is the destination of the path.
+     * The IP address of the Amazon Web Services resource that is the destination of the path.
      */
     DestinationIp?: IpAddress;
     /**
-     * The AWS resource that is the source of the path.
+     * The Amazon Web Services resource that is the source of the path.
      */
     Source: String;
     /**
-     * The AWS resource that is the destination of the path.
+     * The Amazon Web Services resource that is the destination of the path.
      */
     Destination: String;
     /**
@@ -7484,7 +7532,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken: String;
   }
@@ -7555,6 +7603,22 @@ declare namespace EC2 {
      * The number of secondary private IPv4 addresses to assign to a network interface. When you specify a number of secondary IPv4 addresses, Amazon EC2 selects these IP addresses within the subnet's IPv4 CIDR range. You can't specify this option and specify more than one private IP address using privateIpAddresses. The number of IP addresses you can assign to a network interface varies by instance type. For more information, see IP Addresses Per ENI Per Instance Type in the Amazon Virtual Private Cloud User Guide.
      */
     SecondaryPrivateIpAddressCount?: Integer;
+    /**
+     * One or moreIPv4 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: Ipv4PrefixList;
+    /**
+     * The number of IPv4 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv4 Prefixes option.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or moreIPv6 Prefix Delegation prefixes assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: Ipv6PrefixList;
+    /**
+     * The number of IPv6 Prefix Delegation prefixes that AWS automatically assigns to the network interface. You cannot use this option if you use the Ipv6Prefixes option.
+     */
+    Ipv6PrefixCount?: Integer;
     /**
      * Indicates the type of network interface. To create an Elastic Fabric Adapter (EFA), specify efa. For more information, see  Elastic Fabric Adapter in the Amazon Elastic Compute Cloud User Guide. To create a trunk network interface, specify efa. For more information, see  Network interface trunking in the Amazon Elastic Compute Cloud User Guide.
      */
@@ -7617,7 +7681,7 @@ declare namespace EC2 {
      */
     SnapshotId?: SnapshotId;
     /**
-     * Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency. For more information, see Ensuring Idempotency.
+     * Unique, case-sensitive identifier you provide to ensure the idempotency of the request. If you do not specify a client token, a randomly generated token is used for the request to ensure idempotency. For more information, see Ensuring idempotency.
      */
     ClientToken?: String;
     /**
@@ -7813,11 +7877,11 @@ declare namespace EC2 {
      */
     Description?: String;
     /**
-     * The Amazon Resource Name (ARN) of the AWS Outpost on which to create a local snapshot.   To create a snapshot of a volume in a Region, omit this parameter. The snapshot is created in the same Region as the volume.   To create a snapshot of a volume on an Outpost and store the snapshot in the Region, omit this parameter. The snapshot is created in the Region for the Outpost.   To create a snapshot of a volume on an Outpost and store the snapshot on an Outpost, specify the ARN of the destination Outpost. The snapshot must be created on the same Outpost as the volume.   For more information, see  Creating local snapshots from volumes on an Outpost in the Amazon Elastic Compute Cloud User Guide.
+     * The Amazon Resource Name (ARN) of the Outpost on which to create a local snapshot.   To create a snapshot of a volume in a Region, omit this parameter. The snapshot is created in the same Region as the volume.   To create a snapshot of a volume on an Outpost and store the snapshot in the Region, omit this parameter. The snapshot is created in the Region for the Outpost.   To create a snapshot of a volume on an Outpost and store the snapshot on an Outpost, specify the ARN of the destination Outpost. The snapshot must be created on the same Outpost as the volume.   For more information, see Create local snapshots from volumes on an Outpost in the Amazon Elastic Compute Cloud User Guide.
      */
     OutpostArn?: String;
     /**
-     * The ID of the EBS volume.
+     * The ID of the Amazon EBS volume.
      */
     VolumeId: VolumeId;
     /**
@@ -7839,7 +7903,7 @@ declare namespace EC2 {
      */
     InstanceSpecification: InstanceSpecification;
     /**
-     * The Amazon Resource Name (ARN) of the AWS Outpost on which to create the local snapshots.   To create snapshots from an instance in a Region, omit this parameter. The snapshots are created in the same Region as the instance.   To create snapshots from an instance on an Outpost and store the snapshots in the Region, omit this parameter. The snapshots are created in the Region for the Outpost.   To create snapshots from an instance on an Outpost and store the snapshots on an Outpost, specify the ARN of the destination Outpost. The snapshots must be created on the same Outpost as the instance.   For more information, see  Creating multi-volume local snapshots from instances on an Outpost in the Amazon Elastic Compute Cloud User Guide.
+     * The Amazon Resource Name (ARN) of the Outpost on which to create the local snapshots.   To create snapshots from an instance in a Region, omit this parameter. The snapshots are created in the same Region as the instance.   To create snapshots from an instance on an Outpost and store the snapshots in the Region, omit this parameter. The snapshots are created in the Region for the Outpost.   To create snapshots from an instance on an Outpost and store the snapshots on an Outpost, specify the ARN of the destination Outpost. The snapshots must be created on the same Outpost as the instance.   For more information, see  Create multi-volume local snapshots from instances on an Outpost in the Amazon Elastic Compute Cloud User Guide.
      */
     OutpostArn?: String;
     /**
@@ -7905,23 +7969,51 @@ declare namespace EC2 {
      */
     ObjectKey?: String;
   }
+  export interface CreateSubnetCidrReservationRequest {
+    /**
+     * The tags to assign to the subnet CIDR reservation.
+     */
+    TagSpecifications?: TagSpecificationList;
+    /**
+     * The ID of the subnet.
+     */
+    SubnetId: SubnetId;
+    /**
+     * The IPv4 or IPV6 CIDR range to reserve.
+     */
+    Cidr: String;
+    /**
+     * The type of reservation. The following are valid values:    prefix: The Amazon EC2 Prefix Delegation feature assigns the IP addresses to network interfaces that are associated with an instance. For information about Prefix Delegation, see Prefix Delegation for Amazon EC2 network interfaces in the Amazon Elastic Compute Cloud User Guide.    explicit: You manually assign the IP addresses to resources that reside in your subnet.   
+     */
+    ReservationType: SubnetCidrReservationType;
+    /**
+     * The description to assign to the subnet CIDR reservation.
+     */
+    Description?: String;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface CreateSubnetCidrReservationResult {
+    /**
+     * Information about the created subnet CIDR reservation.
+     */
+    SubnetCidrReservation?: SubnetCidrReservation;
+  }
   export interface CreateSubnetRequest {
     /**
      * The tags to assign to the subnet.
      */
     TagSpecifications?: TagSpecificationList;
     /**
-     * The Availability Zone or Local Zone for the subnet. Default: AWS selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet. To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Available Regions in the Amazon Elastic Compute Cloud User Guide. To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.
+     * The Availability Zone or Local Zone for the subnet. Default: Amazon Web Services selects one for you. If you create more than one subnet in your VPC, we do not necessarily select a different zone for each subnet. To create a subnet in a Local Zone, set this value to the Local Zone ID, for example us-west-2-lax-1a. For information about the Regions that support Local Zones, see Available Regions in the Amazon Elastic Compute Cloud User Guide. To create a subnet in an Outpost, set this value to the Availability Zone for the Outpost and specify the Outpost ARN.
      */
     AvailabilityZone?: String;
     /**
      * The AZ ID or the Local Zone ID of the subnet.
      */
     AvailabilityZoneId?: String;
-    /**
-     * The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.
-     */
-    CidrBlock: String;
     /**
      * The IPv6 network range for the subnet, in CIDR notation. The subnet size must use a /64 prefix length.
      */
@@ -7938,6 +8030,10 @@ declare namespace EC2 {
      * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
      */
     DryRun?: Boolean;
+    /**
+     * The IPv4 network range for the subnet, in CIDR notation. For example, 10.0.0.0/24. We modify the specified CIDR block to its canonical form; for example, if you specify 100.68.0.18/18, we modify it to 100.68.0.0/18.
+     */
+    CidrBlock: String;
   }
   export interface CreateSubnetResult {
     /**
@@ -8423,18 +8519,18 @@ declare namespace EC2 {
      */
     Group?: PermissionGroup;
     /**
-     * The AWS account ID to be added or removed.
+     * The ID of the account to be added or removed.
      */
     UserId?: String;
   }
   export type CreateVolumePermissionList = CreateVolumePermission[];
   export interface CreateVolumePermissionModifications {
     /**
-     * Adds the specified AWS account ID or group to the list.
+     * Adds the specified account ID or group to the list.
      */
     Add?: CreateVolumePermissionList;
     /**
-     * Removes the specified AWS account ID or group from the list.
+     * Removes the specified account ID or group from the list.
      */
     Remove?: CreateVolumePermissionList;
   }
@@ -8448,11 +8544,11 @@ declare namespace EC2 {
      */
     Encrypted?: Boolean;
     /**
-     * The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting. The following are the supported values for each volume type:    gp3: 3,000-16,000 IOPS    io1: 100-64,000 IOPS    io2: 100-64,000 IOPS   For io1 and io2 volumes, we guarantee 64,000 IOPS only for Instances built on the Nitro System. Other instance families guarantee performance up to 32,000 IOPS. This parameter is required for io1 and io2 volumes. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard volumes.
+     * The number of I/O operations per second (IOPS). For gp3, io1, and io2 volumes, this represents the number of IOPS that are provisioned for the volume. For gp2 volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting. The following are the supported values for each volume type:    gp3: 3,000-16,000 IOPS    io1: 100-64,000 IOPS    io2: 100-64,000 IOPS    io1 and io2 volumes support up to 64,000 IOPS only on Instances built on the Nitro System. Other instance families support performance up to 32,000 IOPS. This parameter is required for io1 and io2 volumes. The default for gp3 volumes is 3,000 IOPS. This parameter is not supported for gp2, st1, sc1, or standard volumes.
      */
     Iops?: Integer;
     /**
-     * The identifier of the AWS Key Management Service (AWS KMS) customer master key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted state must be true. You can specify the CMK using any of the following:   Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.   Key alias. For example, alias/ExampleAlias.   Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.   Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.   AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
+     * The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true. You can specify the KMS key using any of the following:   Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.   Key alias. For example, alias/ExampleAlias.   Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.   Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.   Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails.
      */
     KmsKeyId?: KmsKeyId;
     /**
@@ -8487,6 +8583,10 @@ declare namespace EC2 {
      * The throughput to provision for a volume, with a maximum of 1,000 MiB/s. This parameter is valid only for gp3 volumes. Valid Range: Minimum value of 125. Maximum value of 1000.
      */
     Throughput?: Integer;
+    /**
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see Ensure Idempotency.
+     */
+    ClientToken?: String;
   }
   export interface CreateVpcEndpointConnectionNotificationRequest {
     /**
@@ -8626,7 +8726,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The AWS account ID of the owner of the accepter VPC. Default: Your AWS account ID
+     * The account ID of the owner of the accepter VPC. Default: Your account ID
      */
     PeerOwnerId?: String;
     /**
@@ -9402,6 +9502,22 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
   }
+  export interface DeleteSubnetCidrReservationRequest {
+    /**
+     * The ID of the subnet CIDR reservation.
+     */
+    SubnetCidrReservationId: SubnetCidrReservationId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface DeleteSubnetCidrReservationResult {
+    /**
+     * Information about the deleted subnet CIDR reservation.
+     */
+    DeletedSubnetCidrReservation?: SubnetCidrReservation;
+  }
   export interface DeleteSubnetRequest {
     /**
      * The ID of the subnet.
@@ -10056,7 +10172,7 @@ declare namespace EC2 {
      */
     CarrierGatewayIds?: CarrierGatewayIdSet;
     /**
-     * One or more filters.    carrier-gateway-id - The ID of the carrier gateway.    state - The state of the carrier gateway (pending | failed | available | deleting | deleted).    owner-id - The AWS account ID of the owner of the carrier gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC associated with the carrier gateway.  
+     * One or more filters.    carrier-gateway-id - The ID of the carrier gateway.    state - The state of the carrier gateway (pending | failed | available | deleting | deleted).    owner-id - The account ID of the owner of the carrier gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC associated with the carrier gateway.  
      */
     Filters?: FilterList;
     /**
@@ -10360,7 +10476,7 @@ declare namespace EC2 {
      */
     DhcpOptionsIds?: DhcpOptionsIdStringList;
     /**
-     * One or more filters.    dhcp-options-id - The ID of a DHCP options set.    key - The key for one of the options (for example, domain-name).    value - The value for one of the options.    owner-id - The ID of the AWS account that owns the DHCP options set.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    dhcp-options-id - The ID of a DHCP options set.    key - The key for one of the options (for example, domain-name).    value - The value for one of the options.    owner-id - The ID of the account that owns the DHCP options set.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -10523,11 +10639,11 @@ declare namespace EC2 {
      */
     StateTransitionReason?: String;
     /**
-     * The ID of the AWS account that enabled fast snapshot restores on the snapshot.
+     * The ID of the account that enabled fast snapshot restores on the snapshot.
      */
     OwnerId?: String;
     /**
-     * The AWS owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
+     * The Amazon Web Services owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
      */
     OwnerAlias?: String;
     /**
@@ -10555,7 +10671,7 @@ declare namespace EC2 {
   export type DescribeFastSnapshotRestoresMaxResults = number;
   export interface DescribeFastSnapshotRestoresRequest {
     /**
-     * The filters. The possible values are:    availability-zone: The Availability Zone of the snapshot.    owner-id: The ID of the AWS account that enabled fast snapshot restore on the snapshot.    snapshot-id: The ID of the snapshot.    state: The state of fast snapshot restores for the snapshot (enabling | optimizing | enabled | disabling | disabled).  
+     * The filters. The possible values are:    availability-zone: The Availability Zone of the snapshot.    owner-id: The ID of the account that enabled fast snapshot restore on the snapshot.    snapshot-id: The ID of the snapshot.    state: The state of fast snapshot restores for the snapshot (enabling | optimizing | enabled | disabling | disabled).  
      */
     Filters?: FilterList;
     /**
@@ -11314,7 +11430,7 @@ declare namespace EC2 {
   export type DescribeInternetGatewaysMaxResults = number;
   export interface DescribeInternetGatewaysRequest {
     /**
-     * One or more filters.    attachment.state - The current state of the attachment between the gateway and the VPC (available). Present only if a VPC is attached.    attachment.vpc-id - The ID of an attached VPC.    internet-gateway-id - The ID of the Internet gateway.    owner-id - The ID of the AWS account that owns the internet gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     * One or more filters.    attachment.state - The current state of the attachment between the gateway and the VPC (available). Present only if a VPC is attached.    attachment.vpc-id - The ID of an attached VPC.    internet-gateway-id - The ID of the Internet gateway.    owner-id - The ID of the account that owns the internet gateway.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
      */
     Filters?: FilterList;
     /**
@@ -11778,7 +11894,7 @@ declare namespace EC2 {
   export type DescribeNetworkAclsMaxResults = number;
   export interface DescribeNetworkAclsRequest {
     /**
-     * One or more filters.    association.association-id - The ID of an association ID for the ACL.    association.network-acl-id - The ID of the network ACL involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    default - Indicates whether the ACL is the default network ACL for the VPC.    entry.cidr - The IPv4 CIDR range specified in the entry.    entry.icmp.code - The ICMP code specified in the entry, if any.    entry.icmp.type - The ICMP type specified in the entry, if any.    entry.ipv6-cidr - The IPv6 CIDR range specified in the entry.    entry.port-range.from - The start of the port range specified in the entry.     entry.port-range.to - The end of the port range specified in the entry.     entry.protocol - The protocol specified in the entry (tcp | udp | icmp or a protocol number).    entry.rule-action - Allows or denies the matching traffic (allow | deny).    entry.rule-number - The number of an entry (in other words, rule) in the set of ACL entries.    network-acl-id - The ID of the network ACL.    owner-id - The ID of the AWS account that owns the network ACL.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the network ACL.  
+     * One or more filters.    association.association-id - The ID of an association ID for the ACL.    association.network-acl-id - The ID of the network ACL involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    default - Indicates whether the ACL is the default network ACL for the VPC.    entry.cidr - The IPv4 CIDR range specified in the entry.    entry.icmp.code - The ICMP code specified in the entry, if any.    entry.icmp.type - The ICMP type specified in the entry, if any.    entry.ipv6-cidr - The IPv6 CIDR range specified in the entry.    entry.port-range.from - The start of the port range specified in the entry.     entry.port-range.to - The end of the port range specified in the entry.     entry.protocol - The protocol specified in the entry (tcp | udp | icmp or a protocol number).    entry.rule-action - Allows or denies the matching traffic (allow | deny).    entry.rule-number - The number of an entry (in other words, rule) in the set of ACL entries.    network-acl-id - The ID of the network ACL.    owner-id - The ID of the account that owns the network ACL.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the network ACL.  
      */
     Filters?: FilterList;
     /**
@@ -12299,7 +12415,7 @@ declare namespace EC2 {
   export type DescribeRouteTablesMaxResults = number;
   export interface DescribeRouteTablesRequest {
     /**
-     * One or more filters.    association.route-table-association-id - The ID of an association ID for the route table.    association.route-table-id - The ID of the route table involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    association.main - Indicates whether the route table is the main route table for the VPC (true | false). Route tables that do not have an association ID are not returned in the response.    owner-id - The ID of the AWS account that owns the route table.    route-table-id - The ID of the route table.    route.destination-cidr-block - The IPv4 CIDR range specified in a route in the table.    route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in a route in the route table.    route.destination-prefix-list-id - The ID (prefix) of the AWS service specified in a route in the table.    route.egress-only-internet-gateway-id - The ID of an egress-only Internet gateway specified in a route in the route table.    route.gateway-id - The ID of a gateway specified in a route in the table.    route.instance-id - The ID of an instance specified in a route in the table.    route.nat-gateway-id - The ID of a NAT gateway.    route.transit-gateway-id - The ID of a transit gateway.    route.origin - Describes how the route was created. CreateRouteTable indicates that the route was automatically created when the route table was created; CreateRoute indicates that the route was manually added to the route table; EnableVgwRoutePropagation indicates that the route was propagated by route propagation.    route.state - The state of a route in the route table (active | blackhole). The blackhole state indicates that the route's target isn't available (for example, the specified gateway isn't attached to the VPC, the specified NAT instance has been terminated, and so on).    route.vpc-peering-connection-id - The ID of a VPC peering connection specified in a route in the table.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the route table.  
+     * One or more filters.    association.route-table-association-id - The ID of an association ID for the route table.    association.route-table-id - The ID of the route table involved in the association.    association.subnet-id - The ID of the subnet involved in the association.    association.main - Indicates whether the route table is the main route table for the VPC (true | false). Route tables that do not have an association ID are not returned in the response.    owner-id - The ID of the account that owns the route table.    route-table-id - The ID of the route table.    route.destination-cidr-block - The IPv4 CIDR range specified in a route in the table.    route.destination-ipv6-cidr-block - The IPv6 CIDR range specified in a route in the route table.    route.destination-prefix-list-id - The ID (prefix) of the Amazon Web Service specified in a route in the table.    route.egress-only-internet-gateway-id - The ID of an egress-only Internet gateway specified in a route in the route table.    route.gateway-id - The ID of a gateway specified in a route in the table.    route.instance-id - The ID of an instance specified in a route in the table.    route.nat-gateway-id - The ID of a NAT gateway.    route.transit-gateway-id - The ID of a transit gateway.    route.origin - Describes how the route was created. CreateRouteTable indicates that the route was automatically created when the route table was created; CreateRoute indicates that the route was manually added to the route table; EnableVgwRoutePropagation indicates that the route was propagated by route propagation.    route.state - The state of a route in the route table (active | blackhole). The blackhole state indicates that the route's target isn't available (for example, the specified gateway isn't attached to the VPC, the specified NAT instance has been terminated, and so on).    route.vpc-peering-connection-id - The ID of a VPC peering connection specified in a route in the table.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the route table.  
      */
     Filters?: FilterList;
     /**
@@ -12526,7 +12642,7 @@ declare namespace EC2 {
   }
   export interface DescribeSnapshotsRequest {
     /**
-     * The filters.    description - A description of the snapshot.    encrypted - Indicates whether the snapshot is encrypted (true | false)    owner-alias - The owner alias, from an Amazon-maintained list (amazon). This is not the user-configured AWS account alias set using the IAM console. We recommend that you use the related parameter instead of this filter.    owner-id - The AWS account ID of the owner. We recommend that you use the related parameter instead of this filter.    progress - The progress of the snapshot, as a percentage (for example, 80%).    snapshot-id - The snapshot ID.    start-time - The time stamp when the snapshot was initiated.    status - The status of the snapshot (pending | completed | error).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    volume-id - The ID of the volume the snapshot is for.    volume-size - The size of the volume, in GiB.  
+     * The filters.    description - A description of the snapshot.    encrypted - Indicates whether the snapshot is encrypted (true | false)    owner-alias - The owner alias, from an Amazon-maintained list (amazon). This is not the user-configured account alias set using the IAM console. We recommend that you use the related parameter instead of this filter.    owner-id - The account ID of the owner. We recommend that you use the related parameter instead of this filter.    progress - The progress of the snapshot, as a percentage (for example, 80%).    snapshot-id - The snapshot ID.    start-time - The time stamp when the snapshot was initiated.    status - The status of the snapshot (pending | completed | error).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    volume-id - The ID of the volume the snapshot is for.    volume-size - The size of the volume, in GiB.  
      */
     Filters?: FilterList;
     /**
@@ -12538,11 +12654,11 @@ declare namespace EC2 {
      */
     NextToken?: String;
     /**
-     * Scopes the results to snapshots with the specified owners. You can specify a combination of AWS account IDs, self, and amazon.
+     * Scopes the results to snapshots with the specified owners. You can specify a combination of account IDs, self, and amazon.
      */
     OwnerIds?: OwnerStringList;
     /**
-     * The IDs of the AWS accounts that can create volumes from the snapshot.
+     * The IDs of the accounts that can create volumes from the snapshot.
      */
     RestorableByUserIds?: RestorableByStringList;
     /**
@@ -12832,7 +12948,7 @@ declare namespace EC2 {
   export type DescribeSubnetsMaxResults = number;
   export interface DescribeSubnetsRequest {
     /**
-     * One or more filters.    availability-zone - The Availability Zone for the subnet. You can also use availabilityZone as the filter name.    availability-zone-id - The ID of the Availability Zone for the subnet. You can also use availabilityZoneId as the filter name.    available-ip-address-count - The number of IPv4 addresses in the subnet that are available.    cidr-block - The IPv4 CIDR block of the subnet. The CIDR block you specify must exactly match the subnet's CIDR block for information to be returned for the subnet. You can also use cidr or cidrBlock as the filter names.    default-for-az - Indicates whether this is the default subnet for the Availability Zone. You can also use defaultForAz as the filter name.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.association-id - An association ID for an IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the subnet.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The ID of the AWS account that owns the subnet.    state - The state of the subnet (pending | available).    subnet-arn - The Amazon Resource Name (ARN) of the subnet.    subnet-id - The ID of the subnet.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the subnet.  
+     * One or more filters.    availability-zone - The Availability Zone for the subnet. You can also use availabilityZone as the filter name.    availability-zone-id - The ID of the Availability Zone for the subnet. You can also use availabilityZoneId as the filter name.    available-ip-address-count - The number of IPv4 addresses in the subnet that are available.    cidr-block - The IPv4 CIDR block of the subnet. The CIDR block you specify must exactly match the subnet's CIDR block for information to be returned for the subnet. You can also use cidr or cidrBlock as the filter names.    default-for-az - Indicates whether this is the default subnet for the Availability Zone. You can also use defaultForAz as the filter name.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.association-id - An association ID for an IPv6 CIDR block associated with the subnet.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the subnet.    outpost-arn - The Amazon Resource Name (ARN) of the Outpost.    owner-id - The ID of the account that owns the subnet.    state - The state of the subnet (pending | available).    subnet-arn - The Amazon Resource Name (ARN) of the subnet.    subnet-id - The ID of the subnet.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC for the subnet.  
      */
     Filters?: FilterList;
     /**
@@ -13668,7 +13784,7 @@ declare namespace EC2 {
   export type DescribeVpcPeeringConnectionsMaxResults = number;
   export interface DescribeVpcPeeringConnectionsRequest {
     /**
-     * One or more filters.    accepter-vpc-info.cidr-block - The IPv4 CIDR block of the accepter VPC.    accepter-vpc-info.owner-id - The AWS account ID of the owner of the accepter VPC.    accepter-vpc-info.vpc-id - The ID of the accepter VPC.    expiration-time - The expiration date and time for the VPC peering connection.    requester-vpc-info.cidr-block - The IPv4 CIDR block of the requester's VPC.    requester-vpc-info.owner-id - The AWS account ID of the owner of the requester VPC.    requester-vpc-info.vpc-id - The ID of the requester VPC.    status-code - The status of the VPC peering connection (pending-acceptance | failed | expired | provisioning | active | deleting | deleted | rejected).    status-message - A message that provides more information about the status of the VPC peering connection, if applicable.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-peering-connection-id - The ID of the VPC peering connection.  
+     * One or more filters.    accepter-vpc-info.cidr-block - The IPv4 CIDR block of the accepter VPC.    accepter-vpc-info.owner-id - The ID of the account that owns the accepter VPC.    accepter-vpc-info.vpc-id - The ID of the accepter VPC.    expiration-time - The expiration date and time for the VPC peering connection.    requester-vpc-info.cidr-block - The IPv4 CIDR block of the requester's VPC.    requester-vpc-info.owner-id - The ID of the account that owns the requester VPC.    requester-vpc-info.vpc-id - The ID of the requester VPC.    status-code - The status of the VPC peering connection (pending-acceptance | failed | expired | provisioning | active | deleting | deleted | rejected).    status-message - A message that provides more information about the status of the VPC peering connection, if applicable.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-peering-connection-id - The ID of the VPC peering connection.  
      */
     Filters?: FilterList;
     /**
@@ -13701,7 +13817,7 @@ declare namespace EC2 {
   export type DescribeVpcsMaxResults = number;
   export interface DescribeVpcsRequest {
     /**
-     * One or more filters.    cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify must exactly match the VPC's CIDR block for information to be returned for the VPC. Must contain the slash followed by one or two digits (for example, /28).    cidr-block-association.cidr-block - An IPv4 CIDR block associated with the VPC.    cidr-block-association.association-id - The association ID for an IPv4 CIDR block associated with the VPC.    cidr-block-association.state - The state of an IPv4 CIDR block associated with the VPC.    dhcp-options-id - The ID of a set of DHCP options.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.ipv6-pool - The ID of the IPv6 address pool from which the IPv6 CIDR block is allocated.    ipv6-cidr-block-association.association-id - The association ID for an IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the VPC.    isDefault - Indicates whether the VPC is the default VPC.    owner-id - The ID of the AWS account that owns the VPC.    state - The state of the VPC (pending | available).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC.  
+     * One or more filters.    cidr - The primary IPv4 CIDR block of the VPC. The CIDR block you specify must exactly match the VPC's CIDR block for information to be returned for the VPC. Must contain the slash followed by one or two digits (for example, /28).    cidr-block-association.cidr-block - An IPv4 CIDR block associated with the VPC.    cidr-block-association.association-id - The association ID for an IPv4 CIDR block associated with the VPC.    cidr-block-association.state - The state of an IPv4 CIDR block associated with the VPC.    dhcp-options-id - The ID of a set of DHCP options.    ipv6-cidr-block-association.ipv6-cidr-block - An IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.ipv6-pool - The ID of the IPv6 address pool from which the IPv6 CIDR block is allocated.    ipv6-cidr-block-association.association-id - The association ID for an IPv6 CIDR block associated with the VPC.    ipv6-cidr-block-association.state - The state of an IPv6 CIDR block associated with the VPC.    is-default - Indicates whether the VPC is the default VPC.    owner-id - The ID of the account that owns the VPC.    state - The state of the VPC (pending | available).    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.    vpc-id - The ID of the VPC.  
      */
     Filters?: FilterList;
     /**
@@ -13878,7 +13994,7 @@ declare namespace EC2 {
      */
     DhcpOptionsId?: String;
     /**
-     * The ID of the AWS account that owns the DHCP options set.
+     * The ID of the account that owns the DHCP options set.
      */
     OwnerId?: String;
     /**
@@ -13963,11 +14079,11 @@ declare namespace EC2 {
      */
     StateTransitionReason?: String;
     /**
-     * The ID of the AWS account that enabled fast snapshot restores on the snapshot.
+     * The ID of the account that enabled fast snapshot restores on the snapshot.
      */
     OwnerId?: String;
     /**
-     * The AWS owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
+     * The Amazon Web Services owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
      */
     OwnerAlias?: String;
     /**
@@ -14718,11 +14834,11 @@ declare namespace EC2 {
      */
     StateTransitionReason?: String;
     /**
-     * The ID of the AWS account that enabled fast snapshot restores on the snapshot.
+     * The ID of the account that enabled fast snapshot restores on the snapshot.
      */
     OwnerId?: String;
     /**
-     * The AWS owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
+     * The Amazon Web Services owner alias that enabled fast snapshot restores on the snapshot. This is intended for future use.
      */
     OwnerAlias?: String;
     /**
@@ -14753,7 +14869,7 @@ declare namespace EC2 {
      */
     AvailabilityZones: AvailabilityZoneStringList;
     /**
-     * The IDs of one or more snapshots. For example, snap-1234567890abcdef0. You can specify a snapshot that was shared with you from another AWS account.
+     * The IDs of one or more snapshots. For example, snap-1234567890abcdef0. You can specify a snapshot that was shared with you from another account.
      */
     SourceSnapshotIds: SnapshotIdStringList;
     /**
@@ -16042,7 +16158,7 @@ declare namespace EC2 {
   }
   export interface GetEbsDefaultKmsKeyIdResult {
     /**
-     * The Amazon Resource Name (ARN) of the default CMK for encryption by default.
+     * The Amazon Resource Name (ARN) of the default KMS key for encryption by default.
      */
     KmsKeyId?: String;
   }
@@ -16304,6 +16420,43 @@ declare namespace EC2 {
      */
     SerialConsoleAccessEnabled?: Boolean;
   }
+  export type GetSubnetCidrReservationsMaxResults = number;
+  export interface GetSubnetCidrReservationsRequest {
+    /**
+     * One or more filters.    reservationType - The type of reservation (prefix | explicit).    subnet-id - The ID of the subnet.    tag:&lt;key&gt; - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key Owner and the value TeamA, specify tag:Owner for the filter name and TeamA for the filter value.    tag-key - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.  
+     */
+    Filters?: FilterList;
+    /**
+     * The ID of the subnet.
+     */
+    SubnetId: SubnetId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+    /**
+     * The token for the next page of results.
+     */
+    NextToken?: String;
+    /**
+     * The maximum number of results to return with a single call. To retrieve the remaining results, make another call with the returned nextToken value.
+     */
+    MaxResults?: GetSubnetCidrReservationsMaxResults;
+  }
+  export interface GetSubnetCidrReservationsResult {
+    /**
+     * Information about the IPv4 subnet CIDR reservations.
+     */
+    SubnetIpv4CidrReservations?: SubnetCidrReservationList;
+    /**
+     * Information about the IPv6 subnet CIDR reservations.
+     */
+    SubnetIpv6CidrReservations?: SubnetCidrReservationList;
+    /**
+     * The token to use to retrieve the next page of results. This value is null when there are no more results to return.
+     */
+    NextToken?: String;
+  }
   export interface GetTransitGatewayAttachmentPropagationsRequest {
     /**
      * The ID of the attachment.
@@ -18060,6 +18213,13 @@ declare namespace EC2 {
   export type InstanceIdStringList = InstanceId[];
   export type InstanceIdsSet = InstanceId[];
   export type InstanceInterruptionBehavior = "hibernate"|"stop"|"terminate"|string;
+  export interface InstanceIpv4Prefix {
+    /**
+     * One or more IPv4 delegated prefixes assigned to the network interface.
+     */
+    Ipv4Prefix?: String;
+  }
+  export type InstanceIpv4PrefixList = InstanceIpv4Prefix[];
   export interface InstanceIpv6Address {
     /**
      * The IPv6 address.
@@ -18074,6 +18234,13 @@ declare namespace EC2 {
      */
     Ipv6Address?: String;
   }
+  export interface InstanceIpv6Prefix {
+    /**
+     * One or more IPv6 delegated prefixes assigned to the network interface.
+     */
+    Ipv6Prefix?: String;
+  }
+  export type InstanceIpv6PrefixList = InstanceIpv6Prefix[];
   export type InstanceLifecycle = "spot"|"on-demand"|string;
   export type InstanceLifecycleType = "spot"|"scheduled"|string;
   export type InstanceList = Instance[];
@@ -18198,6 +18365,14 @@ declare namespace EC2 {
      * Describes the type of network interface. Valid values: interface | efa | trunk 
      */
     InterfaceType?: String;
+    /**
+     * The IPv4 delegated prefixes that are assigned to the network interface.
+     */
+    Ipv4Prefixes?: InstanceIpv4PrefixList;
+    /**
+     * The IPv6 delegated prefixes that are assigned to the network interface.
+     */
+    Ipv6Prefixes?: InstanceIpv6PrefixList;
   }
   export interface InstanceNetworkInterfaceAssociation {
     /**
@@ -18305,6 +18480,22 @@ declare namespace EC2 {
      * The index of the network card. Some instance types support multiple network cards. The primary network interface must be assigned to network card index 0. The default is network card index 0.
      */
     NetworkCardIndex?: Integer;
+    /**
+     * One or more IPv4 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: Ipv4PrefixList;
+    /**
+     * The number of IPv4 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv4Prefix option.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or more IPv6 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: Ipv6PrefixList;
+    /**
+     * The number of IPv6 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv6Prefix option.
+     */
+    Ipv6PrefixCount?: Integer;
   }
   export type InstanceNetworkInterfaceSpecificationList = InstanceNetworkInterfaceSpecification[];
   export interface InstancePrivateIpAddress {
@@ -18618,7 +18809,7 @@ declare namespace EC2 {
      */
     InternetGatewayId?: String;
     /**
-     * The ID of the AWS account that owns the internet gateway.
+     * The ID of the account that owns the internet gateway.
      */
     OwnerId?: String;
     /**
@@ -18673,6 +18864,7 @@ declare namespace EC2 {
     UserIdGroupPairs?: UserIdGroupPairList;
   }
   export type IpPermissionList = IpPermission[];
+  export type IpPrefixList = String[];
   export interface IpRange {
     /**
      * The IPv4 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv4 address, use the /32 prefix length.
@@ -18686,6 +18878,27 @@ declare namespace EC2 {
   export type IpRangeList = IpRange[];
   export type IpRanges = String[];
   export type Ipv4PoolEc2Id = string;
+  export type Ipv4PrefixList = Ipv4PrefixSpecificationRequest[];
+  export type Ipv4PrefixListResponse = Ipv4PrefixSpecificationResponse[];
+  export interface Ipv4PrefixSpecification {
+    /**
+     * The IPv4 Prefix Delegation prefix. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
+     */
+    Ipv4Prefix?: String;
+  }
+  export interface Ipv4PrefixSpecificationRequest {
+    /**
+     * The IPv4 Prefix Delegation prefix. For information, see Prefix Delegation in the Amazon Elastic Compute Cloud User Guide.
+     */
+    Ipv4Prefix?: String;
+  }
+  export interface Ipv4PrefixSpecificationResponse {
+    /**
+     * One or more IPv4 delegated prefixes assigned to the network interface.
+     */
+    Ipv4Prefix?: String;
+  }
+  export type Ipv4PrefixesList = Ipv4PrefixSpecification[];
   export type Ipv6Address = string;
   export type Ipv6AddressList = String[];
   export interface Ipv6CidrAssociation {
@@ -18729,6 +18942,27 @@ declare namespace EC2 {
   export type Ipv6PoolIdList = Ipv6PoolEc2Id[];
   export type Ipv6PoolMaxResults = number;
   export type Ipv6PoolSet = Ipv6Pool[];
+  export type Ipv6PrefixList = Ipv6PrefixSpecificationRequest[];
+  export type Ipv6PrefixListResponse = Ipv6PrefixSpecificationResponse[];
+  export interface Ipv6PrefixSpecification {
+    /**
+     * The IPv6 Prefix Delegation prefix.
+     */
+    Ipv6Prefix?: String;
+  }
+  export interface Ipv6PrefixSpecificationRequest {
+    /**
+     * The IPv6 Prefix Delegation prefix.
+     */
+    Ipv6Prefix?: String;
+  }
+  export interface Ipv6PrefixSpecificationResponse {
+    /**
+     * One or more IPv6 delegated prefixes assigned to the network interface.
+     */
+    Ipv6Prefix?: String;
+  }
+  export type Ipv6PrefixesList = Ipv6PrefixSpecification[];
   export interface Ipv6Range {
     /**
      * The IPv6 CIDR range. You can either specify a CIDR range or a source security group, not both. To specify a single IPv6 address, use the /128 prefix length.
@@ -19022,7 +19256,7 @@ declare namespace EC2 {
      */
     Iops?: Integer;
     /**
-     * The ARN of the AWS Key Management Service (AWS KMS) CMK used for encryption.
+     * The ARN of the Key Management Service (KMS) CMK used for encryption.
      */
     KmsKeyId?: KmsKeyId;
     /**
@@ -19056,7 +19290,7 @@ declare namespace EC2 {
      */
     Iops?: Integer;
     /**
-     * The ARN of the symmetric AWS Key Management Service (AWS KMS) CMK used for encryption.
+     * The ARN of the symmetric Key Management Service (KMS) CMK used for encryption.
      */
     KmsKeyId?: KmsKeyId;
     /**
@@ -19101,13 +19335,13 @@ declare namespace EC2 {
   export type LaunchTemplateElasticInferenceAcceleratorResponseList = LaunchTemplateElasticInferenceAcceleratorResponse[];
   export interface LaunchTemplateEnclaveOptions {
     /**
-     * If this parameter is set to true, the instance is enabled for AWS Nitro Enclaves; otherwise, it is not enabled for AWS Nitro Enclaves.
+     * If this parameter is set to true, the instance is enabled for Amazon Web Services Nitro Enclaves; otherwise, it is not enabled for Amazon Web Services Nitro Enclaves.
      */
     Enabled?: Boolean;
   }
   export interface LaunchTemplateEnclaveOptionsRequest {
     /**
-     * To enable the instance for AWS Nitro Enclaves, set this parameter to true.
+     * To enable the instance for Amazon Web Services Nitro Enclaves, set this parameter to true.
      */
     Enabled?: Boolean;
   }
@@ -19203,7 +19437,7 @@ declare namespace EC2 {
   export type LaunchTemplateInstanceMetadataOptionsState = "pending"|"applied"|string;
   export interface LaunchTemplateInstanceNetworkInterfaceSpecification {
     /**
-     * Indicates whether to associate a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the AWS Wavelength Developer Guide.
+     * Indicates whether to associate a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the Wavelength Developer Guide.
      */
     AssociateCarrierIpAddress?: Boolean;
     /**
@@ -19262,11 +19496,27 @@ declare namespace EC2 {
      * The index of the network card.
      */
     NetworkCardIndex?: Integer;
+    /**
+     * One or more IPv4 delegated prefixes assigned to the network interface.
+     */
+    Ipv4Prefixes?: Ipv4PrefixListResponse;
+    /**
+     * The number of IPv4 delegated prefixes that AWS automatically assigned to the network interface.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or more IPv6 delegated prefixes assigned to the network interface.
+     */
+    Ipv6Prefixes?: Ipv6PrefixListResponse;
+    /**
+     * The number of IPv6 delegated prefixes that AWS automatically assigned to the network interface.
+     */
+    Ipv6PrefixCount?: Integer;
   }
   export type LaunchTemplateInstanceNetworkInterfaceSpecificationList = LaunchTemplateInstanceNetworkInterfaceSpecification[];
   export interface LaunchTemplateInstanceNetworkInterfaceSpecificationRequest {
     /**
-     * Associates a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the AWS Wavelength Developer Guide.
+     * Associates a Carrier IP address with eth0 for a new network interface. Use this option when you launch an instance in a Wavelength Zone and want to associate a Carrier IP address with the network interface. For more information about Carrier IP addresses, see Carrier IP addresses in the Wavelength Developer Guide.
      */
     AssociateCarrierIpAddress?: Boolean;
     /**
@@ -19325,6 +19575,22 @@ declare namespace EC2 {
      * The index of the network card. Some instance types support multiple network cards. The primary network interface must be assigned to network card index 0. The default is network card index 0.
      */
     NetworkCardIndex?: Integer;
+    /**
+     * One or more IPv4 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv4PrefixCount option.
+     */
+    Ipv4Prefixes?: Ipv4PrefixList;
+    /**
+     * The number of IPv4 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv4Prefix option.
+     */
+    Ipv4PrefixCount?: Integer;
+    /**
+     * One or more IPv6 delegated prefixes to be assigned to the network interface. You cannot use this option if you use the Ipv6PrefixCount option.
+     */
+    Ipv6Prefixes?: Ipv6PrefixList;
+    /**
+     * The number of IPv6 delegated prefixes to be automatically assigned to the network interface. You cannot use this option if you use the Ipv6Prefix option.
+     */
+    Ipv6PrefixCount?: Integer;
   }
   export type LaunchTemplateInstanceNetworkInterfaceSpecificationRequestList = LaunchTemplateInstanceNetworkInterfaceSpecificationRequest[];
   export interface LaunchTemplateLicenseConfiguration {
@@ -20073,7 +20339,7 @@ declare namespace EC2 {
   }
   export interface ModifyEbsDefaultKmsKeyIdRequest {
     /**
-     * The identifier of the AWS Key Management Service (AWS KMS) customer master key (CMK) to use for Amazon EBS encryption. If this parameter is not specified, your AWS managed CMK for EBS is used. If KmsKeyId is specified, the encrypted state must be true. You can specify the CMK using any of the following:   Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.   Key alias. For example, alias/ExampleAlias.   Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.   Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.   AWS authenticates the CMK asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails. Amazon EBS does not support asymmetric CMKs.
+     * The identifier of the Key Management Service (KMS) KMS key to use for Amazon EBS encryption. If this parameter is not specified, your KMS key for Amazon EBS is used. If KmsKeyId is specified, the encrypted state must be true. You can specify the KMS key using any of the following:   Key ID. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.   Key alias. For example, alias/ExampleAlias.   Key ARN. For example, arn:aws:kms:us-east-1:012345678910:key/1234abcd-12ab-34cd-56ef-1234567890ab.   Alias ARN. For example, arn:aws:kms:us-east-1:012345678910:alias/ExampleAlias.   Amazon Web Services authenticates the KMS key asynchronously. Therefore, if you specify an ID, alias, or ARN that is not valid, the action can appear to complete, but eventually fails. Amazon EBS does not support asymmetric KMS keys.
      */
     KmsKeyId: KmsKeyId;
     /**
@@ -20083,7 +20349,7 @@ declare namespace EC2 {
   }
   export interface ModifyEbsDefaultKmsKeyIdResult {
     /**
-     * The Amazon Resource Name (ARN) of the default CMK for encryption by default.
+     * The Amazon Resource Name (ARN) of the default KMS key for encryption by default.
      */
     KmsKeyId?: String;
   }
@@ -20979,19 +21245,19 @@ declare namespace EC2 {
      */
     VolumeId: VolumeId;
     /**
-     * The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume. The following are the supported volumes sizes for each volume type:    gp2 and gp3: 1-16,384    io1 and io2: 4-16,384    st1 and sc1: 125-16,384    standard: 1-1,024   Default: If no size is specified, the existing size is retained.
+     * The target size of the volume, in GiB. The target volume size must be greater than or equal to the existing size of the volume. The following are the supported volumes sizes for each volume type:    gp2 and gp3: 1-16,384    io1 and io2: 4-16,384    st1 and sc1: 125-16,384    standard: 1-1,024   Default: The existing size is retained.
      */
     Size?: Integer;
     /**
-     * The target EBS volume type of the volume. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide. Default: If no type is specified, the existing type is retained.
+     * The target EBS volume type of the volume. For more information, see Amazon EBS volume types in the Amazon Elastic Compute Cloud User Guide. Default: The existing type is retained.
      */
     VolumeType?: VolumeType;
     /**
-     * The target IOPS rate of the volume. This parameter is valid only for gp3, io1, and io2 volumes. The following are the supported values for each volume type:    gp3: 3,000-16,000 IOPS    io1: 100-64,000 IOPS    io2: 100-64,000 IOPS   Default: If no IOPS value is specified, the existing value is retained, unless a volume type is modified that supports different values.
+     * The target IOPS rate of the volume. This parameter is valid only for gp3, io1, and io2 volumes. The following are the supported values for each volume type:    gp3: 3,000-16,000 IOPS    io1: 100-64,000 IOPS    io2: 100-64,000 IOPS   Default: The existing value is retained if you keep the same volume type. If you change the volume type to io1, io2, or gp3, the default is 3,000.
      */
     Iops?: Integer;
     /**
-     * The target throughput of the volume, in MiB/s. This parameter is valid only for gp3 volumes. The maximum value is 1,000. Default: If no throughput value is specified, the existing value is retained. Valid Range: Minimum value of 125. Maximum value of 1000.
+     * The target throughput of the volume, in MiB/s. This parameter is valid only for gp3 volumes. The maximum value is 1,000. Default: The existing value is retained if the source and target volume type is gp3. Otherwise, the default value is 125. Valid Range: Minimum value of 125. Maximum value of 1000.
      */
     Throughput?: Integer;
     /**
@@ -21532,7 +21798,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the network ACL.
+     * The ID of the account that owns the network ACL.
      */
     OwnerId?: String;
   }
@@ -21666,7 +21932,7 @@ declare namespace EC2 {
      */
     NetworkInsightsPathId?: NetworkInsightsPathId;
     /**
-     * The Amazon Resource Names (ARN) of the AWS resources that the path must traverse.
+     * The Amazon Resource Names (ARN) of the Amazon Web Services resources that the path must traverse.
      */
     FilterInArns?: ArnList;
     /**
@@ -21724,19 +21990,19 @@ declare namespace EC2 {
      */
     CreatedDate?: MillisecondDateTime;
     /**
-     * The AWS resource that is the source of the path.
+     * The Amazon Web Services resource that is the source of the path.
      */
     Source?: String;
     /**
-     * The AWS resource that is the destination of the path.
+     * The Amazon Web Services resource that is the destination of the path.
      */
     Destination?: String;
     /**
-     * The IP address of the AWS resource that is the source of the path.
+     * The IP address of the Amazon Web Services resource that is the source of the path.
      */
     SourceIp?: IpAddress;
     /**
-     * The IP address of the AWS resource that is the destination of the path.
+     * The IP address of the Amazon Web Services resource that is the destination of the path.
      */
     DestinationIp?: IpAddress;
     /**
@@ -21812,6 +22078,14 @@ declare namespace EC2 {
      * The private IPv4 addresses associated with the network interface.
      */
     PrivateIpAddresses?: NetworkInterfacePrivateIpAddressList;
+    /**
+     * The IPv4 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    Ipv4Prefixes?: Ipv4PrefixesList;
+    /**
+     * The IPv6 Prefix Delegation prefixes that are assigned to the network interface.
+     */
+    Ipv6Prefixes?: Ipv6PrefixesList;
     /**
      * The alias or account ID of the principal or service that created the network interface.
      */
@@ -23504,15 +23778,15 @@ declare namespace EC2 {
      */
     LicenseSpecifications?: LaunchTemplateLicenseSpecificationListRequest;
     /**
-     * Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate Your Instance in the Amazon Elastic Compute Cloud User Guide.
+     * Indicates whether an instance is enabled for hibernation. This parameter is valid only if the instance meets the hibernation prerequisites. For more information, see Hibernate your instance in the Amazon Elastic Compute Cloud User Guide.
      */
     HibernationOptions?: LaunchTemplateHibernationOptionsRequest;
     /**
-     * The metadata options for the instance. For more information, see Instance Metadata and User Data in the Amazon Elastic Compute Cloud User Guide.
+     * The metadata options for the instance. For more information, see Instance metadata and user data in the Amazon Elastic Compute Cloud User Guide.
      */
     MetadataOptions?: LaunchTemplateInstanceMetadataOptionsRequest;
     /**
-     * Indicates whether the instance is enabled for AWS Nitro Enclaves. For more information, see  What is AWS Nitro Enclaves? in the AWS Nitro Enclaves User Guide. You can't enable AWS Nitro Enclaves and hibernation on the same instance.
+     * Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves. For more information, see  What is Amazon Web Services Nitro Enclaves? in the Amazon Web Services Nitro Enclaves User Guide. You can't enable Amazon Web Services Nitro Enclaves and hibernation on the same instance.
      */
     EnclaveOptions?: LaunchTemplateEnclaveOptionsRequest;
   }
@@ -24017,7 +24291,7 @@ declare namespace EC2 {
   }
   export interface ResetEbsDefaultKmsKeyIdResult {
     /**
-     * The Amazon Resource Name (ARN) of the default CMK for EBS encryption by default.
+     * The Amazon Resource Name (ARN) of the default KMS key for EBS encryption by default.
      */
     KmsKeyId?: String;
   }
@@ -24201,7 +24475,7 @@ declare namespace EC2 {
      */
     CreditSpecification?: CreditSpecification;
     /**
-     * The CPU options for the instance. For more information, see Optimizing CPU Options in the Amazon Elastic Compute Cloud User Guide.
+     * The CPU options for the instance. For more information, see Optimizing CPU options in the Amazon Elastic Compute Cloud User Guide.
      */
     CpuOptions?: LaunchTemplateCpuOptions;
     /**
@@ -24213,15 +24487,15 @@ declare namespace EC2 {
      */
     LicenseSpecifications?: LaunchTemplateLicenseList;
     /**
-     * Indicates whether an instance is configured for hibernation. For more information, see Hibernate Your Instance in the Amazon Elastic Compute Cloud User Guide.
+     * Indicates whether an instance is configured for hibernation. For more information, see Hibernate your instance in the Amazon Elastic Compute Cloud User Guide.
      */
     HibernationOptions?: LaunchTemplateHibernationOptions;
     /**
-     * The metadata options for the instance. For more information, see Instance Metadata and User Data in the Amazon Elastic Compute Cloud User Guide.
+     * The metadata options for the instance. For more information, see Instance metadata and user data in the Amazon Elastic Compute Cloud User Guide.
      */
     MetadataOptions?: LaunchTemplateInstanceMetadataOptions;
     /**
-     * Indicates whether the instance is enabled for AWS Nitro Enclaves.
+     * Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.
      */
     EnclaveOptions?: LaunchTemplateEnclaveOptions;
   }
@@ -24419,7 +24693,7 @@ declare namespace EC2 {
      */
     DestinationIpv6CidrBlock?: String;
     /**
-     * The prefix of the AWS service.
+     * The prefix of the Amazon Web Service.
      */
     DestinationPrefixListId?: String;
     /**
@@ -24435,7 +24709,7 @@ declare namespace EC2 {
      */
     InstanceId?: String;
     /**
-     * The AWS account ID of the owner of the instance.
+     * The ID of account that owns the instance.
      */
     InstanceOwnerId?: String;
     /**
@@ -24501,7 +24775,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the route table.
+     * The ID of the account that owns the route table.
      */
     OwnerId?: String;
   }
@@ -25562,11 +25836,11 @@ declare namespace EC2 {
      */
     Encrypted?: Boolean;
     /**
-     * The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the parent volume.
+     * The Amazon Resource Name (ARN) of the Key Management Service (KMS) KMS key that was used to protect the volume encryption key for the parent volume.
      */
     KmsKeyId?: String;
     /**
-     * The AWS account ID of the EBS snapshot owner.
+     * The ID of the account that owns the EBS snapshot.
      */
     OwnerId?: String;
     /**
@@ -25586,7 +25860,7 @@ declare namespace EC2 {
      */
     State?: SnapshotState;
     /**
-     * Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy operation fails (for example, if the proper AWS Key Management Service (AWS KMS) permissions are not obtained) this field displays error state details to help you diagnose why the error occurred. This parameter is only returned by DescribeSnapshots.
+     * Encrypted Amazon EBS snapshots are copied asynchronously. If a snapshot copy operation fails (for example, if the proper Key Management Service (KMS) permissions are not obtained) this field displays error state details to help you diagnose why the error occurred. This parameter is only returned by DescribeSnapshots.
      */
     StateMessage?: String;
     /**
@@ -25598,11 +25872,11 @@ declare namespace EC2 {
      */
     VolumeSize?: Integer;
     /**
-     * The AWS owner alias, from an Amazon-maintained list (amazon). This is not the user-configured AWS account alias set using the IAM console.
+     * The Amazon Web Services owner alias, from an Amazon-maintained list (amazon). This is not the user-configured account alias set using the IAM console.
      */
     OwnerAlias?: String;
     /**
-     * The ARN of the AWS Outpost on which the snapshot is stored. For more information, see EBS Local Snapshot on Outposts in the Amazon Elastic Compute Cloud User Guide.
+     * The ARN of the Outpost on which the snapshot is stored. For more information, see Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
      */
     OutpostArn?: String;
     /**
@@ -25716,7 +25990,7 @@ declare namespace EC2 {
      */
     SnapshotId?: String;
     /**
-     * The ARN of the AWS Outpost on which the snapshot is stored. For more information, see EBS Local Snapshot on Outposts in the Amazon Elastic Compute Cloud User Guide.
+     * The ARN of the Outpost on which the snapshot is stored. For more information, see Amazon EBS local snapshots on Outposts in the Amazon Elastic Compute Cloud User Guide.
      */
     OutpostArn?: String;
   }
@@ -26353,7 +26627,7 @@ declare namespace EC2 {
      */
     TagSpecifications?: TagSpecificationList;
     /**
-     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to Ensure Idempotency.
+     * Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see How to ensure idempotency.
      */
     ClientToken: String;
   }
@@ -26513,7 +26787,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the subnet.
+     * The ID of the account that owns the subnet.
      */
     OwnerId?: String;
     /**
@@ -26560,6 +26834,39 @@ declare namespace EC2 {
     StatusMessage?: String;
   }
   export type SubnetCidrBlockStateCode = "associating"|"associated"|"disassociating"|"disassociated"|"failing"|"failed"|string;
+  export interface SubnetCidrReservation {
+    /**
+     * The ID of the subnet CIDR reservation.
+     */
+    SubnetCidrReservationId?: SubnetCidrReservationId;
+    /**
+     * The ID of the subnet.
+     */
+    SubnetId?: SubnetId;
+    /**
+     * The CIDR that has been reserved.
+     */
+    Cidr?: String;
+    /**
+     * The type of reservation. 
+     */
+    ReservationType?: SubnetCidrReservationType;
+    /**
+     * The ID of the account that owns the subnet CIDR reservation. 
+     */
+    OwnerId?: String;
+    /**
+     * The description assigned to the subnet CIDR reservation.
+     */
+    Description?: String;
+    /**
+     * The tags assigned to the subnet CIDR reservation.
+     */
+    Tags?: TagList;
+  }
+  export type SubnetCidrReservationId = string;
+  export type SubnetCidrReservationList = SubnetCidrReservation[];
+  export type SubnetCidrReservationType = "prefix"|"explicit"|string;
   export type SubnetId = string;
   export type SubnetIdStringList = SubnetId[];
   export interface SubnetIpv6CidrBlockAssociation {
@@ -27907,13 +28214,17 @@ declare namespace EC2 {
   export type TunnelOptionsList = TunnelOption[];
   export interface UnassignIpv6AddressesRequest {
     /**
-     * The ID of the network interface.
+     * The IPv6 addresses to unassign from the network interface.
      */
-    NetworkInterfaceId: NetworkInterfaceId;
+    Ipv6Addresses?: Ipv6AddressList;
     /**
-     * The IPv6 addresses to unassign from the network interface.
+     * One or moreIPv6 Prefix Delegation prefixes to unassign from the network interface.
      */
-    Ipv6Addresses: Ipv6AddressList;
+    Ipv6Prefixes?: IpPrefixList;
+    /**
+     * The ID of the network interface.
+     */
+    NetworkInterfaceId: NetworkInterfaceId;
   }
   export interface UnassignIpv6AddressesResult {
     /**
@@ -27924,6 +28235,10 @@ declare namespace EC2 {
      * The IPv6 addresses that have been unassigned from the network interface.
      */
     UnassignedIpv6Addresses?: Ipv6AddressList;
+    /**
+     * The IPv4 Prefix Delegation prefixes that have been unassigned from the network interface.
+     */
+    UnassignedIpv6Prefixes?: IpPrefixList;
   }
   export interface UnassignPrivateIpAddressesRequest {
     /**
@@ -27933,7 +28248,11 @@ declare namespace EC2 {
     /**
      * The secondary private IP addresses to unassign from the network interface. You can specify this option multiple times to unassign more than one IP address.
      */
-    PrivateIpAddresses: PrivateIpAddressStringList;
+    PrivateIpAddresses?: PrivateIpAddressStringList;
+    /**
+     * The IPv4 Prefix Delegation prefixes to unassign from the network interface.
+     */
+    Ipv4Prefixes?: IpPrefixList;
   }
   export type UnlimitedSupportedInstanceFamily = "t2"|"t3"|"t3a"|"t4g"|string;
   export interface UnmonitorInstancesRequest {
@@ -28203,7 +28522,7 @@ declare namespace EC2 {
      */
     Encrypted?: Boolean;
     /**
-     * The Amazon Resource Name (ARN) of the AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the volume encryption key for the volume.
+     * The Amazon Resource Name (ARN) of the Key Management Service (KMS) KMS key that was used to protect the volume encryption key for the volume.
      */
     KmsKeyId?: String;
     /**
@@ -28488,7 +28807,7 @@ declare namespace EC2 {
      */
     VpcId?: String;
     /**
-     * The ID of the AWS account that owns the VPC.
+     * The ID of the account that owns the VPC.
      */
     OwnerId?: String;
     /**
@@ -28776,7 +29095,7 @@ declare namespace EC2 {
      */
     CidrBlockSet?: CidrBlockSet;
     /**
-     * The AWS account ID of the VPC owner.
+     * The ID of the account that owns the VPC.
      */
     OwnerId?: String;
     /**