aws-sdk 2.774.0 → 2.778.0

package/clients/ec2.d.ts

@@ -2989,11 +2989,11 @@ declare class EC2 extends Service {
    */
   purchaseScheduledInstances(callback?: (err: AWSError, data: EC2.Types.PurchaseScheduledInstancesResult) => void): Request<EC2.Types.PurchaseScheduledInstancesResult, AWSError>;
   /**
-   * Requests a reboot of the specified instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belong to you. Requests to reboot terminated instances are ignored. If an instance does not cleanly shut down within four minutes, Amazon EC2 performs a hard reboot. For more information about troubleshooting, see Getting console output and rebooting instances in the Amazon Elastic Compute Cloud User Guide.
+   * Requests a reboot of the specified instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belong to you. Requests to reboot terminated instances are ignored. If an instance does not cleanly shut down within a few minutes, Amazon EC2 performs a hard reboot. For more information about troubleshooting, see Getting console output and rebooting instances in the Amazon Elastic Compute Cloud User Guide.
    */
   rebootInstances(params: EC2.Types.RebootInstancesRequest, callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
-   * Requests a reboot of the specified instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belong to you. Requests to reboot terminated instances are ignored. If an instance does not cleanly shut down within four minutes, Amazon EC2 performs a hard reboot. For more information about troubleshooting, see Getting console output and rebooting instances in the Amazon Elastic Compute Cloud User Guide.
+   * Requests a reboot of the specified instances. This operation is asynchronous; it only queues a request to reboot the specified instances. The operation succeeds if the instances are valid and belong to you. Requests to reboot terminated instances are ignored. If an instance does not cleanly shut down within a few minutes, Amazon EC2 performs a hard reboot. For more information about troubleshooting, see Getting console output and rebooting instances in the Amazon Elastic Compute Cloud User Guide.
    */
   rebootInstances(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
   /**
@@ -6912,7 +6912,7 @@ declare namespace EC2 {
   }
   export interface CreateSpotDatafeedSubscriptionRequest {
     /**
-     * The Amazon S3 bucket in which to store the Spot Instance data feed.
+     * The name of the Amazon S3 bucket in which to store the Spot Instance data feed. For more information about bucket names, see Rules for bucket naming in the Amazon S3 Developer Guide.
      */
     Bucket: String;
     /**
@@ -6920,7 +6920,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * A prefix for the data feed file names.
+     * The prefix for the data feed file names.
      */
     Prefix?: String;
   }
@@ -10032,7 +10032,7 @@ declare namespace EC2 {
      */
     InstanceTypes?: RequestInstanceTypeList;
     /**
-     * One or more filters. Filter names and values are case-sensitive.    auto-recovery-supported - Indicates whether auto recovery is supported. (true | false)    bare-metal - Indicates whether it is a bare metal instance type. (true | false)    burstable-performance-supported - Indicates whether it is a burstable performance instance type. (true | false)    current-generation - Indicates whether this instance type is the latest generation instance type of an instance family. (true | false)    ebs-info.ebs-optimized-info.baseline-bandwidth-in-mbps - The baseline bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.baseline-throughput-in-mbps - The baseline throughput performance for an EBS-optimized instance type, in MBps.    ebs-info.ebs-optimized-info.baseline-iops - The baseline input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.maximum-bandwidth-in-mbps - The maximum bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.maximum-throughput-in-mbps - The maximum throughput performance for an EBS-optimized instance type, in MBps.    ebs-info.ebs-optimized-info.maximum-iops - The maximum input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-support - Indicates whether the instance type is EBS-optimized. (supported | unsupported | default)    ebs-info.encryption-support - Indicates whether EBS encryption is supported. (supported | unsupported)    ebs-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported or required. (required | supported | unsupported)    free-tier-eligible - Indicates whether the instance type is eligible to use in the free tier. (true | false)    hibernation-supported - Indicates whether On-Demand hibernation is supported. (true | false)    hypervisor - The hypervisor used. (nitro | xen)    instance-storage-info.disk.count - The number of local disks.    instance-storage-info.disk.size-in-gb - The storage size of each instance storage disk, in GB.    instance-storage-info.disk.type - The storage technology for the local instance storage disks. (hdd | ssd)    instance-storage-info.total-size-in-gb - The total amount of storage available from all local instance storage, in GB.    instance-storage-supported - Indicates whether the instance type has local instance storage. (true | false)    memory-info.size-in-mib - The memory size.    network-info.ena-support - Indicates whether Elastic Network Adapter (ENA) is supported or required. (required | supported | unsupported)    network-info.efa-supported - Indicates whether the instance type supports Elastic Fabric Adapter (EFA). (true | false)    network-info.ipv4-addresses-per-interface - The maximum number of private IPv4 addresses per network interface.    network-info.ipv6-addresses-per-interface - The maximum number of private IPv6 addresses per network interface.    network-info.ipv6-supported - Indicates whether the instance type supports IPv6. (true | false)    network-info.maximum-network-interfaces - The maximum number of network interfaces per instance.    network-info.network-performance - Describes the network performance.    processor-info.sustained-clock-speed-in-ghz - The CPU clock speed, in GHz.    vcpu-info.default-cores - The default number of cores for the instance type.    vcpu-info.default-threads-per-core - The default number of threads per core for the instance type.    vcpu-info.default-vcpus - The default number of vCPUs for the instance type.  
+     * One or more filters. Filter names and values are case-sensitive.    auto-recovery-supported - Indicates whether auto recovery is supported. (true | false)    bare-metal - Indicates whether it is a bare metal instance type. (true | false)    burstable-performance-supported - Indicates whether it is a burstable performance instance type. (true | false)    current-generation - Indicates whether this instance type is the latest generation instance type of an instance family. (true | false)    ebs-info.ebs-optimized-info.baseline-bandwidth-in-mbps - The baseline bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.baseline-iops - The baseline input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.baseline-throughput-in-mbps - The baseline throughput performance for an EBS-optimized instance type, in MBps.    ebs-info.ebs-optimized-info.maximum-bandwidth-in-mbps - The maximum bandwidth performance for an EBS-optimized instance type, in Mbps.    ebs-info.ebs-optimized-info.maximum-iops - The maximum input/output storage operations per second for an EBS-optimized instance type.    ebs-info.ebs-optimized-info.maximum-throughput-in-mbps - The maximum throughput performance for an EBS-optimized instance type, in MBps.    ebs-info.ebs-optimized-support - Indicates whether the instance type is EBS-optimized. (supported | unsupported | default)    ebs-info.encryption-support - Indicates whether EBS encryption is supported. (supported | unsupported)    ebs-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported for EBS volumes. (required | supported | unsupported)    free-tier-eligible - Indicates whether the instance type is eligible to use in the free tier. (true | false)    hibernation-supported - Indicates whether On-Demand hibernation is supported. (true | false)    hypervisor - The hypervisor. (nitro | xen)    instance-storage-info.disk.count - The number of local disks.    instance-storage-info.disk.size-in-gb - The storage size of each instance storage disk, in GB.    instance-storage-info.disk.type - The storage technology for the local instance storage disks. (hdd | ssd)    instance-storage-info.nvme-support - Indicates whether non-volatile memory express (NVMe) is supported for instance store. (required | supported) | unsupported)    instance-storage-info.total-size-in-gb - The total amount of storage available from all local instance storage, in GB.    instance-storage-supported - Indicates whether the instance type has local instance storage. (true | false)    instance-type - The instance type (for example c5.2xlarge or c5*).    memory-info.size-in-mib - The memory size.    network-info.efa-supported - Indicates whether the instance type supports Elastic Fabric Adapter (EFA). (true | false)    network-info.ena-support - Indicates whether Elastic Network Adapter (ENA) is supported or required. (required | supported | unsupported)    network-info.ipv4-addresses-per-interface - The maximum number of private IPv4 addresses per network interface.    network-info.ipv6-addresses-per-interface - The maximum number of private IPv6 addresses per network interface.    network-info.ipv6-supported - Indicates whether the instance type supports IPv6. (true | false)    network-info.maximum-network-interfaces - The maximum number of network interfaces per instance.    network-info.network-performance - The network performance (for example, "25 Gigabit").    processor-info.supported-architecture - The CPU architecture. (arm64 | i386 | x86_64)    processor-info.sustained-clock-speed-in-ghz - The CPU clock speed, in GHz.    supported-root-device-type - The root device type. (ebs | instance-store)    supported-usage-class - The usage class. (on-demand | spot)    supported-virtualization-type - The virtualization type. (hvm | paravirtual)    vcpu-info.default-cores - The default number of cores for the instance type.    vcpu-info.default-threads-per-core - The default number of threads per core for the instance type.    vcpu-info.default-vcpus - The default number of vCPUs for the instance type.    vcpu-info.valid-cores - The number of cores that can be configured for the instance type.    vcpu-info.valid-threads-per-core - The number of threads per core that can be configured for the instance type. For example, "1" or "1,2".  
      */
     Filters?: FilterList;
     /**
@@ -11353,7 +11353,7 @@ declare namespace EC2 {
   }
   export interface DescribeSpotPriceHistoryRequest {
     /**
-     * One or more filters.    availability-zone - The Availability Zone for which prices should be returned.    instance-type - The type of instance (for example, m3.medium).    product-description - The product description for the Spot price (Linux/UNIX | SUSE Linux | Windows | Linux/UNIX (Amazon VPC) | SUSE Linux (Amazon VPC) | Windows (Amazon VPC)).    spot-price - The Spot price. The value must match exactly (or use wildcards; greater than or less than comparison is not supported).    timestamp - The time stamp of the Spot price history, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). You can use wildcards (* and ?). Greater than or less than comparison is not supported.  
+     * One or more filters.    availability-zone - The Availability Zone for which prices should be returned.    instance-type - The type of instance (for example, m3.medium).    product-description - The product description for the Spot price (Linux/UNIX | Red Hat Enterprise Linux | SUSE Linux | Windows | Linux/UNIX (Amazon VPC) | Red Hat Enterprise Linux (Amazon VPC) | SUSE Linux (Amazon VPC) | Windows (Amazon VPC)).    spot-price - The Spot price. The value must match exactly (or use wildcards; greater than or less than comparison is not supported).    timestamp - The time stamp of the Spot price history, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). You can use wildcards (* and ?). Greater than or less than comparison is not supported.  
      */
     Filters?: FilterList;
     /**
@@ -13242,6 +13242,7 @@ declare namespace EC2 {
   }
   export type EndDateType = "unlimited"|"limited"|string;
   export type EndpointSet = ClientVpnEndpoint[];
+  export type EphemeralNvmeSupport = "unsupported"|"supported"|"required"|string;
   export type ErrorSet = ValidationError[];
   export type EventCode = "instance-reboot"|"system-reboot"|"system-maintenance"|"instance-retirement"|"instance-stop"|string;
   export interface EventInformation {
@@ -16376,6 +16377,10 @@ declare namespace EC2 {
      * Array describing the disks that are available for the instance type.
      */
     Disks?: DiskInfoList;
+    /**
+     * Indicates whether non-volatile memory express (NVMe) is supported for instance store.
+     */
+    NvmeSupport?: EphemeralNvmeSupport;
   }
   export type InstanceTagKeySet = String[];
   export interface InstanceTagNotificationAttribute {
@@ -20989,7 +20994,7 @@ declare namespace EC2 {
      */
     AvailabilityZoneGroup?: String;
     /**
-     * The required duration for the Spot Instances (also known as Spot blocks), in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, or 360). The duration period starts as soon as your Spot Instance receives its instance ID. At the end of the duration period, Amazon EC2 marks the Spot Instance for termination and provides a Spot Instance termination notice, which gives the instance a two-minute warning before it terminates. You can't specify an Availability Zone group or a launch group if you specify a duration.
+     * The required duration for the Spot Instances (also known as Spot blocks), in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, or 360). The duration period starts as soon as your Spot Instance receives its instance ID. At the end of the duration period, Amazon EC2 marks the Spot Instance for termination and provides a Spot Instance termination notice, which gives the instance a two-minute warning before it terminates. You can't specify an Availability Zone group or a launch group if you specify a duration. New accounts or accounts with no previous billing history with AWS are not eligible for Spot Instances with a defined duration (also known as Spot blocks).
      */
     BlockDurationMinutes?: Integer;
     /**
@@ -21025,7 +21030,7 @@ declare namespace EC2 {
      */
     ValidFrom?: DateTime;
     /**
-     * The end date of the request. If this is a one-time request, the request remains active until all instances launch, the request is canceled, or this date is reached. If the request is persistent, it remains active until it is canceled or this date is reached. The default end date is 7 days from the current date.
+     * The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ).   For a persistent request, the request remains active until the ValidUntil date and time is reached. Otherwise, the request remains active until you cancel it.    For a one-time request, the request remains active until all instances launch, the request is canceled, or the ValidUntil date and time is reached. By default, the request is valid for 7 days from the date the request was created.  
      */
     ValidUntil?: DateTime;
     /**
@@ -23045,7 +23050,7 @@ declare namespace EC2 {
   export type SpotAllocationStrategy = "lowest-price"|"diversified"|"capacity-optimized"|string;
   export interface SpotDatafeedSubscription {
     /**
-     * The Amazon S3 bucket where the Spot Instance data feed is located.
+     * The name of the Amazon S3 bucket where the Spot Instance data feed is located.
      */
     Bucket?: String;
     /**
@@ -23057,7 +23062,7 @@ declare namespace EC2 {
      */
     OwnerId?: String;
     /**
-     * The prefix that is prepended to data feed files.
+     * The prefix for the data feed files.
      */
     Prefix?: String;
     /**
@@ -23107,7 +23112,7 @@ declare namespace EC2 {
      */
     Monitoring?: SpotFleetMonitoring;
     /**
-     * One or more network interfaces. If you specify a network interface, you must specify subnet IDs and security group IDs using the network interface.
+     * One or more network interfaces. If you specify a network interface, you must specify subnet IDs and security group IDs using the network interface.   SpotFleetLaunchSpecification currently does not support Elastic Fabric Adapter (EFA). To specify an EFA, you must use LaunchTemplateConfig. 
      */
     NetworkInterfaces?: InstanceNetworkInterfaceSpecificationList;
     /**
@@ -23350,7 +23355,7 @@ declare namespace EC2 {
      */
     ValidFrom?: DateTime;
     /**
-     * The end date of the request, in UTC format (for example, YYYY-MM-DDTHH:MM:SSZ). If this is a one-time request, it remains active until all instances launch, the request is canceled, or this date is reached. If the request is persistent, it remains active until it is canceled or this date is reached. The default end date is 7 days from the current date.
+     * The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ).   For a persistent request, the request remains active until the validUntil date and time is reached. Otherwise, the request remains active until you cancel it.    For a one-time request, the request remains active until all instances launch, the request is canceled, or the validUntil date and time is reached. By default, the request is valid for 7 days from the date the request was created.  
      */
     ValidUntil?: DateTime;
     /**
@@ -23397,11 +23402,11 @@ declare namespace EC2 {
      */
     SpotInstanceType?: SpotInstanceType;
     /**
-     * The required duration for the Spot Instances (also known as Spot blocks), in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, or 360).
+     * The required duration for the Spot Instances (also known as Spot blocks), in minutes. This value must be a multiple of 60 (60, 120, 180, 240, 300, or 360). The duration period starts as soon as your Spot Instance receives its instance ID. At the end of the duration period, Amazon EC2 marks the Spot Instance for termination and provides a Spot Instance termination notice, which gives the instance a two-minute warning before it terminates. You can't specify an Availability Zone group or a launch group if you specify a duration. New accounts or accounts with no previous billing history with AWS are not eligible for Spot Instances with a defined duration (also known as Spot blocks).
      */
     BlockDurationMinutes?: Integer;
     /**
-     * The end date of the request. For a one-time request, the request remains active until all instances launch, the request is canceled, or this date is reached. If the request is persistent, it remains active until it is canceled or this date and time is reached. The default end date is 7 days from the current date.
+     * The end date of the request, in UTC format (YYYY-MM-DDTHH:MM:SSZ). Supported only for persistent requests.   For a persistent request, the request remains active until the ValidUntil date and time is reached. Otherwise, the request remains active until you cancel it.   For a one-time request, ValidUntil is not supported. The request remains active until all instances launch or you cancel the request.  
      */
     ValidUntil?: DateTime;
     /**

package/clients/elasticbeanstalk.d.ts

@@ -1654,7 +1654,7 @@ declare namespace ElasticBeanstalk {
      */
     LoadBalancer?: LoadBalancerDescription;
   }
-  export type EnvironmentStatus = "Launching"|"Updating"|"Ready"|"Terminating"|"Terminated"|string;
+  export type EnvironmentStatus = "Aborting"|"Launching"|"Updating"|"LinkingFrom"|"LinkingTo"|"Ready"|"Terminating"|"Terminated"|string;
   export interface EnvironmentTier {
     /**
      * The name of this environment tier. Valid values:   For Web server tier – WebServer    For Worker tier – Worker   

package/clients/globalaccelerator.d.ts

@@ -20,19 +20,19 @@ declare class GlobalAccelerator extends Service {
    */
   advertiseByoipCidr(callback?: (err: AWSError, data: GlobalAccelerator.Types.AdvertiseByoipCidrResponse) => void): Request<GlobalAccelerator.Types.AdvertiseByoipCidrResponse, AWSError>;
   /**
-   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers. To see an AWS CLI example of creating an accelerator, scroll down to Example. If you bring your own IP address ranges to AWS Global Accelerator (BYOIP), you can assign IP addresses from your own pool to your accelerator as the static IP address entry points. Only one IP address from each of your IP address ranges can be used for each accelerator.  You must specify the US West (Oregon) Region to create or update accelerators. 
+   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers. To see an AWS CLI example of creating an accelerator, scroll down to Example.  Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
    */
   createAccelerator(params: GlobalAccelerator.Types.CreateAcceleratorRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.CreateAcceleratorResponse, AWSError>;
   /**
-   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers. To see an AWS CLI example of creating an accelerator, scroll down to Example. If you bring your own IP address ranges to AWS Global Accelerator (BYOIP), you can assign IP addresses from your own pool to your accelerator as the static IP address entry points. Only one IP address from each of your IP address ranges can be used for each accelerator.  You must specify the US West (Oregon) Region to create or update accelerators. 
+   * Create an accelerator. An accelerator includes one or more listeners that process inbound connections and direct traffic to one or more endpoint groups, each of which includes endpoints, such as Network Load Balancers. To see an AWS CLI example of creating an accelerator, scroll down to Example.  Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
    */
   createAccelerator(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.CreateAcceleratorResponse, AWSError>;
   /**
-   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. To see an AWS CLI example of creating an endpoint group, scroll down to Example.
+   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint. To see an AWS CLI example of creating an endpoint group, scroll down to Example.
    */
   createEndpointGroup(params: GlobalAccelerator.Types.CreateEndpointGroupRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.CreateEndpointGroupResponse, AWSError>;
   /**
-   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. To see an AWS CLI example of creating an endpoint group, scroll down to Example.
+   * Create an endpoint group for the specified listener. An endpoint group is a collection of endpoints in one AWS Region. A resource must be valid and active when you add it as an endpoint. To see an AWS CLI example of creating an endpoint group, scroll down to Example.
    */
   createEndpointGroup(callback?: (err: AWSError, data: GlobalAccelerator.Types.CreateEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.CreateEndpointGroupResponse, AWSError>;
   /**
@@ -172,11 +172,11 @@ declare class GlobalAccelerator extends Service {
    */
   untagResource(callback?: (err: AWSError, data: GlobalAccelerator.Types.UntagResourceResponse) => void): Request<GlobalAccelerator.Types.UntagResourceResponse, AWSError>;
   /**
-   * Update an accelerator. To see an AWS CLI example of updating an accelerator, scroll down to Example.  You must specify the US West (Oregon) Region to create or update accelerators. 
+   * Update an accelerator. To see an AWS CLI example of updating an accelerator, scroll down to Example.  Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
    */
   updateAccelerator(params: GlobalAccelerator.Types.UpdateAcceleratorRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.UpdateAcceleratorResponse, AWSError>;
   /**
-   * Update an accelerator. To see an AWS CLI example of updating an accelerator, scroll down to Example.  You must specify the US West (Oregon) Region to create or update accelerators. 
+   * Update an accelerator. To see an AWS CLI example of updating an accelerator, scroll down to Example.  Global Accelerator is a global service that supports endpoints in multiple AWS Regions but you must specify the US West (Oregon) Region to create or update accelerators. 
    */
   updateAccelerator(callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateAcceleratorResponse) => void): Request<GlobalAccelerator.Types.UpdateAcceleratorResponse, AWSError>;
   /**
@@ -188,11 +188,11 @@ declare class GlobalAccelerator extends Service {
    */
   updateAcceleratorAttributes(callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateAcceleratorAttributesResponse) => void): Request<GlobalAccelerator.Types.UpdateAcceleratorAttributesResponse, AWSError>;
   /**
-   * Update an endpoint group. To see an AWS CLI example of updating an endpoint group, scroll down to Example.
+   * Update an endpoint group. A resource must be valid and active when you add it as an endpoint. To see an AWS CLI example of updating an endpoint group, scroll down to Example. 
    */
   updateEndpointGroup(params: GlobalAccelerator.Types.UpdateEndpointGroupRequest, callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.UpdateEndpointGroupResponse, AWSError>;
   /**
-   * Update an endpoint group. To see an AWS CLI example of updating an endpoint group, scroll down to Example.
+   * Update an endpoint group. A resource must be valid and active when you add it as an endpoint. To see an AWS CLI example of updating an endpoint group, scroll down to Example. 
    */
   updateEndpointGroup(callback?: (err: AWSError, data: GlobalAccelerator.Types.UpdateEndpointGroupResponse) => void): Request<GlobalAccelerator.Types.UpdateEndpointGroupResponse, AWSError>;
   /**
@@ -289,7 +289,7 @@ declare namespace GlobalAccelerator {
      */
     State?: ByoipCidrState;
     /**
-     * A history of status changes for an IP address range that that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).
+     * A history of status changes for an IP address range that you bring to AWS Global Accelerator through bring your own IP address (BYOIP).
      */
     Events?: ByoipCidrEvents;
   }
@@ -327,7 +327,7 @@ declare namespace GlobalAccelerator {
      */
     IpAddressType?: IpAddressType;
     /**
-     * Optionally, if you've added your own IP address pool to Global Accelerator, you can choose IP addresses from your own pool to use for the accelerator's static IP addresses. You can specify one or two addresses, separated by a comma. Do not include the /32 suffix. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
+     * Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose IP addresses from your own pool to use for the accelerator's static IP addresses when you create an accelerator. You can specify one or two addresses, separated by a comma. Do not include the /32 suffix. Only one IP address from each of your IP address ranges can be used for each accelerator. If you specify only one IP address from your IP address range, Global Accelerator assigns a second static IP address for the accelerator from the AWS IP address pool.  Note that you can't update IP addresses for an existing accelerator. To change them, you must create a new accelerator with the new addresses. For more information, see Bring Your Own IP Addresses (BYOIP) in the AWS Global Accelerator Developer Guide.
      */
     IpAddresses?: IpAddresses;
     /**
@@ -355,7 +355,7 @@ declare namespace GlobalAccelerator {
      */
     ListenerArn: GenericString;
     /**
-     * The name of the AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
+     * The AWS Region where the endpoint group is located. A listener can have only one endpoint group in a specific Region.
      */
     EndpointGroupRegion: GenericString;
     /**
@@ -390,6 +390,10 @@ declare namespace GlobalAccelerator {
      * A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the uniqueness—of the request.
      */
     IdempotencyToken: IdempotencyToken;
+    /**
+     * Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints. For more information, see  Port overrides in the AWS Global Accelerator Developer Guide.
+     */
+    PortOverrides?: PortOverrides;
   }
   export interface CreateEndpointGroupResponse {
     /**
@@ -411,7 +415,7 @@ declare namespace GlobalAccelerator {
      */
     Protocol: Protocol;
     /**
-     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Clienty affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
+     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
      */
     ClientAffinity?: ClientAffinity;
     /**
@@ -505,7 +509,7 @@ declare namespace GlobalAccelerator {
   }
   export interface EndpointConfiguration {
     /**
-     * An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For EC2 instances, this is the EC2 instance ID.  An Application Load Balancer can be either internal or internet-facing.
+     * An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. A resource must be valid and active when you add it as an endpoint. An Application Load Balancer can be either internal or internet-facing.
      */
     EndpointId?: GenericString;
     /**
@@ -547,7 +551,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointGroupArn?: GenericString;
     /**
-     * The AWS Region that this endpoint group belongs.
+     * The AWS Region where the endpoint group is located.
      */
     EndpointGroupRegion?: GenericString;
     /**
@@ -578,6 +582,10 @@ declare namespace GlobalAccelerator {
      * The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
      */
     ThresholdCount?: ThresholdCount;
+    /**
+     * Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you to map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on. 
+     */
+    PortOverrides?: PortOverrides;
   }
   export type EndpointGroups = EndpointGroup[];
   export type EndpointWeight = number;
@@ -716,13 +724,24 @@ declare namespace GlobalAccelerator {
      */
     Protocol?: Protocol;
     /**
-     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Clienty affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
+     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
      */
     ClientAffinity?: ClientAffinity;
   }
   export type Listeners = Listener[];
   export type MaxResults = number;
   export type PortNumber = number;
+  export interface PortOverride {
+    /**
+     * The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.
+     */
+    ListenerPort?: PortNumber;
+    /**
+     * The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.
+     */
+    EndpointPort?: PortNumber;
+  }
+  export type PortOverrides = PortOverride[];
   export interface PortRange {
     /**
      * The first port in the range of ports, inclusive.
@@ -847,7 +866,7 @@ declare namespace GlobalAccelerator {
      */
     EndpointGroupArn: GenericString;
     /**
-     * The list of endpoint objects.
+     * The list of endpoint objects. A resource must be valid and active when you add it as an endpoint.
      */
     EndpointConfigurations?: EndpointConfigurations;
     /**
@@ -874,6 +893,10 @@ declare namespace GlobalAccelerator {
      * The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.
      */
     ThresholdCount?: ThresholdCount;
+    /**
+     * Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints. For more information, see  Port overrides in the AWS Global Accelerator Developer Guide.
+     */
+    PortOverrides?: PortOverrides;
   }
   export interface UpdateEndpointGroupResponse {
     /**
@@ -895,7 +918,7 @@ declare namespace GlobalAccelerator {
      */
     Protocol?: Protocol;
     /**
-     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Clienty affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
+     * Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications, regardless of the port and protocol of the client request. Client affinity gives you control over whether to always route each client to the same specific endpoint. AWS Global Accelerator uses a consistent-flow hashing algorithm to choose the optimal endpoint for a connection. If client affinity is NONE, Global Accelerator uses the "five-tuple" (5-tuple) properties—source IP address, source port, destination IP address, destination port, and protocol—to select the hash value, and then chooses the best endpoint. However, with this setting, if someone uses different ports to connect to Global Accelerator, their connections might not be always routed to the same endpoint because the hash value changes.  If you want a given client to always be routed to the same endpoint, set client affinity to SOURCE_IP instead. When you use the SOURCE_IP setting, Global Accelerator uses the "two-tuple" (2-tuple) properties— source (client) IP address and destination IP address—to select the hash value. The default value is NONE.
      */
     ClientAffinity?: ClientAffinity;
   }

package/clients/glue.d.ts

@@ -1902,6 +1902,10 @@ declare namespace Glue {
      * A list of UTF-8 strings that specify the custom classifiers that are associated with the crawler.
      */
     Classifiers?: ClassifierNameList;
+    /**
+     * A policy that specifies whether to crawl the entire dataset again, or to crawl only folders that were added since the last crawler run.
+     */
+    RecrawlPolicy?: RecrawlPolicy;
     /**
      * The policy that specifies update and delete behaviors for the crawler.
      */
@@ -2084,6 +2088,10 @@ declare namespace Glue {
      * The policy for the crawler's update and deletion behavior.
      */
     SchemaChangePolicy?: SchemaChangePolicy;
+    /**
+     * A policy that specifies whether to crawl the entire dataset again, or to crawl only folders that were added since the last crawler run.
+     */
+    RecrawlPolicy?: RecrawlPolicy;
     /**
      * Crawler configuration information. This versioned JSON string allows users to specify aspects of a crawler's behavior. For more information, see Configuring a Crawler.
      */
@@ -5557,6 +5565,13 @@ declare namespace Glue {
   export type PythonScript = string;
   export type PythonVersionString = string;
   export type RecordsCount = number;
+  export type RecrawlBehavior = "CRAWL_EVERYTHING"|"CRAWL_NEW_FOLDERS_ONLY"|string;
+  export interface RecrawlPolicy {
+    /**
+     * Specifies whether to crawl the entire dataset again or to crawl only folders that were added since the last crawler run. A value of CRAWL_EVERYTHING specifies crawling the entire dataset again. A value of CRAWL_NEW_FOLDERS_ONLY specifies crawling only folders that were added since the last crawler run.
+     */
+    RecrawlBehavior?: RecrawlBehavior;
+  }
   export type ReplaceBoolean = boolean;
   export interface ResetJobBookmarkRequest {
     /**
@@ -6624,6 +6639,10 @@ declare namespace Glue {
      * The policy for the crawler's update and deletion behavior.
      */
     SchemaChangePolicy?: SchemaChangePolicy;
+    /**
+     * A policy that specifies whether to crawl the entire dataset again, or to crawl only folders that were added since the last crawler run.
+     */
+    RecrawlPolicy?: RecrawlPolicy;
     /**
      * Crawler configuration information. This versioned JSON string allows users to specify aspects of a crawler's behavior. For more information, see Configuring a Crawler.
      */

package/clients/kendra.d.ts

@@ -435,25 +435,29 @@ declare namespace Kendra {
      */
     Type: DataSourceType;
     /**
-     * The data source connector configuration information that is required to access the repository.
+     * The connector configuration information that is required to access the repository. You can't specify the Configuration parameter when the Type parameter is set to CUSTOM. If you do, you receive a ValidationException exception. The Configuration parameter is required for all other data sources.
      */
-    Configuration: DataSourceConfiguration;
+    Configuration?: DataSourceConfiguration;
     /**
      * A description for the data source.
      */
     Description?: Description;
     /**
-     * Sets the frequency that Amazon Kendra will check the documents in your repository and update the index. If you don't set a schedule Amazon Kendra will not periodically update the index. You can call the StartDataSourceSyncJob operation to update the index.
+     * Sets the frequency that Amazon Kendra will check the documents in your repository and update the index. If you don't set a schedule Amazon Kendra will not periodically update the index. You can call the StartDataSourceSyncJob operation to update the index. You can't specify the Schedule parameter when the Type parameter is set to CUSTOM. If you do, you receive a ValidationException exception.
      */
     Schedule?: ScanSchedule;
     /**
-     * The Amazon Resource Name (ARN) of a role with permission to access the data source. For more information, see IAM Roles for Amazon Kendra.
+     * The Amazon Resource Name (ARN) of a role with permission to access the data source. For more information, see IAM Roles for Amazon Kendra. You can't specify the RoleArn parameter when the Type parameter is set to CUSTOM. If you do, you receive a ValidationException exception. The RoleArn parameter is required for all other data sources.
      */
-    RoleArn: RoleArn;
+    RoleArn?: RoleArn;
     /**
      * A list of key-value pairs that identify the data source. You can use the tags to identify and organize your resources and to control access to resources.
      */
     Tags?: TagList;
+    /**
+     * A token that you provide to identify the request to create a data source. Multiple calls to the CreateDataSource operation with the same client token will create only one data source.
+     */
+    ClientToken?: ClientTokenName;
   }
   export interface CreateDataSourceResponse {
     /**
@@ -490,6 +494,10 @@ declare namespace Kendra {
      * The format of the input file. You can choose between a basic CSV format, a CSV format that includes customs attributes in a header, and a JSON format that includes custom attributes. The format must match the format of the file stored in the S3 bucket identified in the S3Path parameter. For more information, see Adding questions and answers.
      */
     FileFormat?: FaqFileFormat;
+    /**
+     * A token that you provide to identify the request to create a FAQ. Multiple calls to the CreateFaqRequest operation with the same client token will create only one FAQ. 
+     */
+    ClientToken?: ClientTokenName;
   }
   export interface CreateFaqResponse {
     /**
@@ -507,7 +515,7 @@ declare namespace Kendra {
      */
     Edition?: IndexEdition;
     /**
-     * An IAM role that gives Amazon Kendra permissions to access your Amazon CloudWatch logs and metrics. This is also the role used when you use the BatchPutDocument operation to index documents from an Amazon S3 bucket.
+     * An AWS Identity and Access Management (IAM) role that gives Amazon Kendra permissions to access your Amazon CloudWatch logs and metrics. This is also the role used when you use the BatchPutDocument operation to index documents from an Amazon S3 bucket.
      */
     RoleArn: RoleArn;
     /**
@@ -519,7 +527,7 @@ declare namespace Kendra {
      */
     Description?: Description;
     /**
-     * A token that you provide to identify the request to create an index. Multiple calls to the CreateIndex operation with the same client token will create only one index.”
+     * A token that you provide to identify the request to create an index. Multiple calls to the CreateIndex operation with the same client token will create only one index.
      */
     ClientToken?: ClientTokenName;
     /**
@@ -677,7 +685,7 @@ declare namespace Kendra {
     IndexFieldName: IndexFieldName;
   }
   export type DataSourceToIndexFieldMappingList = DataSourceToIndexFieldMapping[];
-  export type DataSourceType = "S3"|"SHAREPOINT"|"DATABASE"|"SALESFORCE"|"ONEDRIVE"|"SERVICENOW"|string;
+  export type DataSourceType = "S3"|"SHAREPOINT"|"DATABASE"|"SALESFORCE"|"ONEDRIVE"|"SERVICENOW"|"CUSTOM"|string;
   export interface DataSourceVpcConfiguration {
     /**
      * A list of identifiers for subnets within your Amazon VPC. The subnets should be able to connect to each other in the VPC, and they should have outgoing access to the Internet through a NAT device.
@@ -1469,7 +1477,11 @@ declare namespace Kendra {
      */
     InclusionPrefixes?: DataSourceInclusionsExclusionsStrings;
     /**
-     * A list of glob patterns for documents that should not be indexed. If a document that matches an inclusion prefix also matches an exclusion pattern, the document is not indexed. For more information about glob patterns, see glob (programming) in Wikipedia.
+     * A list of glob patterns for documents that should be indexed. If a document that matches an inclusion pattern also matches an exclusion pattern, the document is not indexed. For more information about glob patterns, see glob (programming) in Wikipedia.
+     */
+    InclusionPatterns?: DataSourceInclusionsExclusionsStrings;
+    /**
+     * A list of glob patterns for documents that should not be indexed. If a document that matches an inclusion prefix or inclusion pattern also matches an exclusion pattern, the document is not indexed. For more information about glob patterns, see glob (programming) in Wikipedia.
      */
     ExclusionPatterns?: DataSourceInclusionsExclusionsStrings;
     DocumentsMetadataConfiguration?: DocumentsMetadataConfiguration;

package/clients/macie2.d.ts

@@ -148,11 +148,11 @@ declare class Macie2 extends Service {
    */
   disableMacie(callback?: (err: AWSError, data: Macie2.Types.DisableMacieResponse) => void): Request<Macie2.Types.DisableMacieResponse, AWSError>;
   /**
-   * Disables an account as a delegated administrator of Amazon Macie for an AWS organization.
+   * Disables an account as the delegated Amazon Macie administrator account for an AWS organization.
    */
   disableOrganizationAdminAccount(params: Macie2.Types.DisableOrganizationAdminAccountRequest, callback?: (err: AWSError, data: Macie2.Types.DisableOrganizationAdminAccountResponse) => void): Request<Macie2.Types.DisableOrganizationAdminAccountResponse, AWSError>;
   /**
-   * Disables an account as a delegated administrator of Amazon Macie for an AWS organization.
+   * Disables an account as the delegated Amazon Macie administrator account for an AWS organization.
    */
   disableOrganizationAdminAccount(callback?: (err: AWSError, data: Macie2.Types.DisableOrganizationAdminAccountResponse) => void): Request<Macie2.Types.DisableOrganizationAdminAccountResponse, AWSError>;
   /**
@@ -180,11 +180,11 @@ declare class Macie2 extends Service {
    */
   enableMacie(callback?: (err: AWSError, data: Macie2.Types.EnableMacieResponse) => void): Request<Macie2.Types.EnableMacieResponse, AWSError>;
   /**
-   * Enables an account as a delegated administrator of Amazon Macie for an AWS organization.
+   * Designates an account as the delegated Amazon Macie administrator account for an AWS organization.
    */
   enableOrganizationAdminAccount(params: Macie2.Types.EnableOrganizationAdminAccountRequest, callback?: (err: AWSError, data: Macie2.Types.EnableOrganizationAdminAccountResponse) => void): Request<Macie2.Types.EnableOrganizationAdminAccountResponse, AWSError>;
   /**
-   * Enables an account as a delegated administrator of Amazon Macie for an AWS organization.
+   * Designates an account as the delegated Amazon Macie administrator account for an AWS organization.
    */
   enableOrganizationAdminAccount(callback?: (err: AWSError, data: Macie2.Types.EnableOrganizationAdminAccountResponse) => void): Request<Macie2.Types.EnableOrganizationAdminAccountResponse, AWSError>;
   /**
@@ -332,11 +332,11 @@ declare class Macie2 extends Service {
    */
   listMembers(callback?: (err: AWSError, data: Macie2.Types.ListMembersResponse) => void): Request<Macie2.Types.ListMembersResponse, AWSError>;
   /**
-   * Retrieves information about the account that's designated as the delegated administrator of Amazon Macie for an AWS organization.
+   * Retrieves information about the delegated Amazon Macie administrator account for an AWS organization.
    */
   listOrganizationAdminAccounts(params: Macie2.Types.ListOrganizationAdminAccountsRequest, callback?: (err: AWSError, data: Macie2.Types.ListOrganizationAdminAccountsResponse) => void): Request<Macie2.Types.ListOrganizationAdminAccountsResponse, AWSError>;
   /**
-   * Retrieves information about the account that's designated as the delegated administrator of Amazon Macie for an AWS organization.
+   * Retrieves information about the delegated Amazon Macie administrator account for an AWS organization.
    */
   listOrganizationAdminAccounts(callback?: (err: AWSError, data: Macie2.Types.ListOrganizationAdminAccountsResponse) => void): Request<Macie2.Types.ListOrganizationAdminAccountsResponse, AWSError>;
   /**
@@ -412,11 +412,11 @@ declare class Macie2 extends Service {
    */
   updateMemberSession(callback?: (err: AWSError, data: Macie2.Types.UpdateMemberSessionResponse) => void): Request<Macie2.Types.UpdateMemberSessionResponse, AWSError>;
   /**
-   * Updates Amazon Macie configuration settings for an AWS organization.
+   * Updates the Amazon Macie configuration settings for an AWS organization.
    */
   updateOrganizationConfiguration(params: Macie2.Types.UpdateOrganizationConfigurationRequest, callback?: (err: AWSError, data: Macie2.Types.UpdateOrganizationConfigurationResponse) => void): Request<Macie2.Types.UpdateOrganizationConfigurationResponse, AWSError>;
   /**
-   * Updates Amazon Macie configuration settings for an AWS organization.
+   * Updates the Amazon Macie configuration settings for an AWS organization.
    */
   updateOrganizationConfiguration(callback?: (err: AWSError, data: Macie2.Types.UpdateOrganizationConfigurationResponse) => void): Request<Macie2.Types.UpdateOrganizationConfigurationResponse, AWSError>;
 }
@@ -1311,7 +1311,7 @@ declare namespace Macie2 {
      */
     autoEnable?: __boolean;
     /**
-     * Specifies whether the maximum number of Amazon Macie member accounts are already associated with the AWS organization.
+     * Specifies whether the maximum number of Amazon Macie member accounts are part of the AWS organization.
      */
     maxAccountLimitReached?: __boolean;
   }
@@ -1364,7 +1364,7 @@ declare namespace Macie2 {
   }
   export interface EnableOrganizationAdminAccountRequest {
     /**
-     * The AWS account ID for the account.
+     * The AWS account ID for the account to designate as the delegated Amazon Macie administrator account for the organization.
      */
     adminAccountId: __string;
     /**
@@ -2227,7 +2227,7 @@ declare namespace Macie2 {
   }
   export interface ListOrganizationAdminAccountsResponse {
     /**
-     * An array of objects, one for each account that's designated as a delegated administrator of Amazon Macie for the AWS organization. Of those accounts, only one can have a status of ENABLED.
+     * An array of objects, one for each delegated Amazon Macie administrator account for the organization. Only one of these accounts can have a status of ENABLED.
      */
     adminAccounts?: __listOfAdminAccount;
     /**
@@ -2331,7 +2331,7 @@ declare namespace Macie2 {
      */
     lineRanges?: Ranges;
     /**
-     * An array of objects, one for each occurrence of sensitive data in a binary text file. Each object specifies the position of the data relative to the start of the file. This value is typically null. For binary text files, Macie adds location data to a lineRanges.Range or Page object, depending on the file type.
+     * An array of objects, one for each occurrence of sensitive data in a binary text file. Each object specifies the position of the data relative to the beginning of the file. This value is typically null. For binary text files, Macie adds location data to a lineRanges.Range or Page object, depending on the file type.
      */
     offsetRanges?: Ranges;
     /**
@@ -2350,7 +2350,7 @@ declare namespace Macie2 {
      */
     lineRange?: Range;
     /**
-     * The position of the data on the page, relative to the start and end of the page.
+     * The position of the data on the page, relative to the beginning of the page.
      */
     offsetRange?: Range;
     /**
@@ -2383,11 +2383,11 @@ declare namespace Macie2 {
   }
   export interface Range {
     /**
-     * Possible values are: In an Occurrences.lineRanges array, the number of lines from the end of the file. In an Occurrences.offsetRanges array, the number of characters from the end of the file. In a Page object, the number of lines (lineRange) or characters (offsetRange) from the end of the page.
+     * Possible values are: In an Occurrences.lineRanges array, the number of lines from the beginning of the file to the end of the sensitive data. In an Occurrences.offsetRanges array, the number of characters from the beginning of the file to the end of the sensitive data. In a Page object, the number of lines (lineRange) or characters (offsetRange) from the beginning of the page to the end of the sensitive data.
      */
     end?: __long;
     /**
-     * Possible values are: In an Occurrences.lineRanges array, the number of lines from the start of the file. In an Occurrences.offsetRanges array, the number of characters from the start of the file. In a Page object, the number of lines (lineRange) or characters (offsetRange) from the start of the page.
+     * Possible values are: In an Occurrences.lineRanges array, the number of lines from the beginning of the file to the beginning of the sensitive data. In an Occurrences.offsetRanges array, the number of characters from the beginning of the file to the beginning of the sensitive data. In a Page object, the number of lines (lineRange) or characters (offsetRange) from the beginning of the page to the beginning of the sensitive data.
      */
     start?: __long;
     /**