aws-sdk 2.1604.0 → 2.1605.0

package/clients/ec2.d.ts

@@ -533,11 +533,11 @@ declare class EC2 extends Service {
    */
   createDefaultVpc(callback?: (err: AWSError, data: EC2.Types.CreateDefaultVpcResult) => void): Request<EC2.Types.CreateDefaultVpcResult, AWSError>;
   /**
-   * Creates a custom set of DHCP options. After you create a DHCP option set, you associate it with a VPC. After you associate a DHCP option set with a VPC, all existing and newly launched instances in the VPC use this set of DHCP options. The following are the individual DHCP options you can specify. For more information, see DHCP options sets in the Amazon VPC User Guide.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in any other Region, specify region.compute.internal. Otherwise, specify a custom domain name. This value is used to complete unqualified DNS hostnames. Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP option set is associated with a VPC that has instances running operating systems that treat the value as a single domain, specify only one domain name.    domain-name-servers - The IP addresses of up to four DNS servers, or AmazonProvidedDNS. To specify multiple domain name servers in a single parameter, separate the IP addresses using commas. To have your instances receive custom DNS hostnames as specified in domain-name, you must specify a custom DNS server.    ntp-servers - The IP addresses of up to eight Network Time Protocol (NTP) servers (four IPv4 addresses and four IPv6 addresses).    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2. Broadcast and multicast are not supported. For more information about NetBIOS node types, see RFC 2132.    ipv6-preferred-lease-time - A value (in seconds, minutes, hours, or years) for how frequently a running instance with an IPv6 assigned to it goes through DHCPv6 lease renewal. Acceptable values are between 140 and 2147483647 seconds (approximately 68 years). If no value is entered, the default lease time is 140 seconds. If you use long-term addressing for EC2 instances, you can increase the lease time and avoid frequent lease renewal requests. Lease renewal typically occurs when half of the lease time has elapsed.  
+   * Creates a custom set of DHCP options. After you create a DHCP option set, you associate it with a VPC. After you associate a DHCP option set with a VPC, all existing and newly launched instances in the VPC use this set of DHCP options. The following are the individual DHCP options you can specify. For more information, see DHCP options sets in the Amazon VPC User Guide.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in any other Region, specify region.compute.internal. Otherwise, specify a custom domain name. This value is used to complete unqualified DNS hostnames. Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP option set is associated with a VPC that has instances running operating systems that treat the value as a single domain, specify only one domain name.    domain-name-servers - The IP addresses of up to four DNS servers, or AmazonProvidedDNS. To specify multiple domain name servers in a single parameter, separate the IP addresses using commas. To have your instances receive custom DNS hostnames as specified in domain-name, you must specify a custom DNS server.    ntp-servers - The IP addresses of up to eight Network Time Protocol (NTP) servers (four IPv4 addresses and four IPv6 addresses).    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2. Broadcast and multicast are not supported. For more information about NetBIOS node types, see RFC 2132.    ipv6-address-preferred-lease-time - A value (in seconds, minutes, hours, or years) for how frequently a running instance with an IPv6 assigned to it goes through DHCPv6 lease renewal. Acceptable values are between 140 and 2147483647 seconds (approximately 68 years). If no value is entered, the default lease time is 140 seconds. If you use long-term addressing for EC2 instances, you can increase the lease time and avoid frequent lease renewal requests. Lease renewal typically occurs when half of the lease time has elapsed.  
    */
   createDhcpOptions(params: EC2.Types.CreateDhcpOptionsRequest, callback?: (err: AWSError, data: EC2.Types.CreateDhcpOptionsResult) => void): Request<EC2.Types.CreateDhcpOptionsResult, AWSError>;
   /**
-   * Creates a custom set of DHCP options. After you create a DHCP option set, you associate it with a VPC. After you associate a DHCP option set with a VPC, all existing and newly launched instances in the VPC use this set of DHCP options. The following are the individual DHCP options you can specify. For more information, see DHCP options sets in the Amazon VPC User Guide.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in any other Region, specify region.compute.internal. Otherwise, specify a custom domain name. This value is used to complete unqualified DNS hostnames. Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP option set is associated with a VPC that has instances running operating systems that treat the value as a single domain, specify only one domain name.    domain-name-servers - The IP addresses of up to four DNS servers, or AmazonProvidedDNS. To specify multiple domain name servers in a single parameter, separate the IP addresses using commas. To have your instances receive custom DNS hostnames as specified in domain-name, you must specify a custom DNS server.    ntp-servers - The IP addresses of up to eight Network Time Protocol (NTP) servers (four IPv4 addresses and four IPv6 addresses).    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2. Broadcast and multicast are not supported. For more information about NetBIOS node types, see RFC 2132.    ipv6-preferred-lease-time - A value (in seconds, minutes, hours, or years) for how frequently a running instance with an IPv6 assigned to it goes through DHCPv6 lease renewal. Acceptable values are between 140 and 2147483647 seconds (approximately 68 years). If no value is entered, the default lease time is 140 seconds. If you use long-term addressing for EC2 instances, you can increase the lease time and avoid frequent lease renewal requests. Lease renewal typically occurs when half of the lease time has elapsed.  
+   * Creates a custom set of DHCP options. After you create a DHCP option set, you associate it with a VPC. After you associate a DHCP option set with a VPC, all existing and newly launched instances in the VPC use this set of DHCP options. The following are the individual DHCP options you can specify. For more information, see DHCP options sets in the Amazon VPC User Guide.    domain-name - If you're using AmazonProvidedDNS in us-east-1, specify ec2.internal. If you're using AmazonProvidedDNS in any other Region, specify region.compute.internal. Otherwise, specify a custom domain name. This value is used to complete unqualified DNS hostnames. Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP option set is associated with a VPC that has instances running operating systems that treat the value as a single domain, specify only one domain name.    domain-name-servers - The IP addresses of up to four DNS servers, or AmazonProvidedDNS. To specify multiple domain name servers in a single parameter, separate the IP addresses using commas. To have your instances receive custom DNS hostnames as specified in domain-name, you must specify a custom DNS server.    ntp-servers - The IP addresses of up to eight Network Time Protocol (NTP) servers (four IPv4 addresses and four IPv6 addresses).    netbios-name-servers - The IP addresses of up to four NetBIOS name servers.    netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2. Broadcast and multicast are not supported. For more information about NetBIOS node types, see RFC 2132.    ipv6-address-preferred-lease-time - A value (in seconds, minutes, hours, or years) for how frequently a running instance with an IPv6 assigned to it goes through DHCPv6 lease renewal. Acceptable values are between 140 and 2147483647 seconds (approximately 68 years). If no value is entered, the default lease time is 140 seconds. If you use long-term addressing for EC2 instances, you can increase the lease time and avoid frequent lease renewal requests. Lease renewal typically occurs when half of the lease time has elapsed.  
    */
   createDhcpOptions(callback?: (err: AWSError, data: EC2.Types.CreateDhcpOptionsResult) => void): Request<EC2.Types.CreateDhcpOptionsResult, AWSError>;
   /**
@@ -653,19 +653,19 @@ declare class EC2 extends Service {
    */
   createKeyPair(callback?: (err: AWSError, data: EC2.Types.KeyPair) => void): Request<EC2.Types.KeyPair, AWSError>;
   /**
-   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launch an instance from a launch template in the Amazon Elastic Compute Cloud User Guide. If you want to clone an existing launch template as the basis for creating a new launch template, you can use the Amazon EC2 console. The API, SDKs, and CLI do not support cloning a template. For more information, see Create a launch template from an existing launch template in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launch an instance from a launch template in the Amazon Elastic Compute Cloud User Guide. To clone an existing launch template as the basis for a new launch template, use the Amazon EC2 console. The API, SDKs, and CLI do not support cloning a template. For more information, see Create a launch template from an existing launch template in the Amazon Elastic Compute Cloud User Guide.
    */
   createLaunchTemplate(params: EC2.Types.CreateLaunchTemplateRequest, callback?: (err: AWSError, data: EC2.Types.CreateLaunchTemplateResult) => void): Request<EC2.Types.CreateLaunchTemplateResult, AWSError>;
   /**
-   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launch an instance from a launch template in the Amazon Elastic Compute Cloud User Guide. If you want to clone an existing launch template as the basis for creating a new launch template, you can use the Amazon EC2 console. The API, SDKs, and CLI do not support cloning a template. For more information, see Create a launch template from an existing launch template in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a launch template. A launch template contains the parameters to launch an instance. When you launch an instance using RunInstances, you can specify a launch template instead of providing the launch parameters in the request. For more information, see Launch an instance from a launch template in the Amazon Elastic Compute Cloud User Guide. To clone an existing launch template as the basis for a new launch template, use the Amazon EC2 console. The API, SDKs, and CLI do not support cloning a template. For more information, see Create a launch template from an existing launch template in the Amazon Elastic Compute Cloud User Guide.
    */
   createLaunchTemplate(callback?: (err: AWSError, data: EC2.Types.CreateLaunchTemplateResult) => void): Request<EC2.Types.CreateLaunchTemplateResult, AWSError>;
   /**
-   * Creates a new version of a launch template. You can specify an existing version of launch template from which to base the new version. Launch template versions are numbered in the order in which they are created. You cannot specify, change, or replace the numbering of launch template versions. Launch templates are immutable; after you create a launch template, you can't modify it. Instead, you can create a new version of the launch template that includes any changes you require. For more information, see Modify a launch template (manage launch template versions) in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a new version of a launch template. You must specify an existing launch template, either by name or ID. You can determine whether the new version inherits parameters from a source version, and add or overwrite parameters as needed. Launch template versions are numbered in the order in which they are created. You can't specify, change, or replace the numbering of launch template versions. Launch templates are immutable; after you create a launch template, you can't modify it. Instead, you can create a new version of the launch template that includes the changes that you require. For more information, see Modify a launch template (manage launch template versions) in the Amazon Elastic Compute Cloud User Guide.
    */
   createLaunchTemplateVersion(params: EC2.Types.CreateLaunchTemplateVersionRequest, callback?: (err: AWSError, data: EC2.Types.CreateLaunchTemplateVersionResult) => void): Request<EC2.Types.CreateLaunchTemplateVersionResult, AWSError>;
   /**
-   * Creates a new version of a launch template. You can specify an existing version of launch template from which to base the new version. Launch template versions are numbered in the order in which they are created. You cannot specify, change, or replace the numbering of launch template versions. Launch templates are immutable; after you create a launch template, you can't modify it. Instead, you can create a new version of the launch template that includes any changes you require. For more information, see Modify a launch template (manage launch template versions) in the Amazon Elastic Compute Cloud User Guide.
+   * Creates a new version of a launch template. You must specify an existing launch template, either by name or ID. You can determine whether the new version inherits parameters from a source version, and add or overwrite parameters as needed. Launch template versions are numbered in the order in which they are created. You can't specify, change, or replace the numbering of launch template versions. Launch templates are immutable; after you create a launch template, you can't modify it. Instead, you can create a new version of the launch template that includes the changes that you require. For more information, see Modify a launch template (manage launch template versions) in the Amazon Elastic Compute Cloud User Guide.
    */
   createLaunchTemplateVersion(callback?: (err: AWSError, data: EC2.Types.CreateLaunchTemplateVersionResult) => void): Request<EC2.Types.CreateLaunchTemplateVersionResult, AWSError>;
   /**
@@ -2101,11 +2101,11 @@ declare class EC2 extends Service {
    */
   describeImageAttribute(callback?: (err: AWSError, data: EC2.Types.ImageAttribute) => void): Request<EC2.Types.ImageAttribute, AWSError>;
   /**
-   * Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you. The images available to you include public images, private images that you own, and private images owned by other Amazon Web Services accounts for which you have explicit launch permissions. Recently deregistered images appear in the returned results for a short interval and then return empty results. After all instances that reference a deregistered AMI are terminated, specifying the ID of the image will eventually return an error indicating that the AMI ID cannot be found.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you. The images available to you include public images, private images that you own, and private images owned by other Amazon Web Services accounts for which you have explicit launch permissions. Recently deregistered images appear in the returned results for a short interval and then return empty results. After all instances that reference a deregistered AMI are terminated, specifying the ID of the image will eventually return an error indicating that the AMI ID cannot be found.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeImages(params: EC2.Types.DescribeImagesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeImagesResult) => void): Request<EC2.Types.DescribeImagesResult, AWSError>;
   /**
-   * Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you. The images available to you include public images, private images that you own, and private images owned by other Amazon Web Services accounts for which you have explicit launch permissions. Recently deregistered images appear in the returned results for a short interval and then return empty results. After all instances that reference a deregistered AMI are terminated, specifying the ID of the image will eventually return an error indicating that the AMI ID cannot be found.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified images (AMIs, AKIs, and ARIs) available to you or all of the images available to you. The images available to you include public images, private images that you own, and private images owned by other Amazon Web Services accounts for which you have explicit launch permissions. Recently deregistered images appear in the returned results for a short interval and then return empty results. After all instances that reference a deregistered AMI are terminated, specifying the ID of the image will eventually return an error indicating that the AMI ID cannot be found.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeImages(callback?: (err: AWSError, data: EC2.Types.DescribeImagesResult) => void): Request<EC2.Types.DescribeImagesResult, AWSError>;
   /**
@@ -2197,11 +2197,11 @@ declare class EC2 extends Service {
    */
   describeInstanceTypes(callback?: (err: AWSError, data: EC2.Types.DescribeInstanceTypesResult) => void): Request<EC2.Types.DescribeInstanceTypesResult, AWSError>;
   /**
-   * Describes the specified instances or all instances. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes information for only those instances that meet the filter criteria. If you do not specify instance IDs or filters, the output includes information for all instances, which can affect performance. We recommend that you use pagination to ensure that the operation returns quickly and successfully. If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the output. Recently terminated instances might appear in the returned results. This interval is usually less than one hour. If you describe instances in the rare case where an Availability Zone is experiencing a service disruption and you specify instance IDs that are in the affected zone, or do not specify any instance IDs at all, the call fails. If you describe instances and specify only instance IDs that are in an unaffected zone, the call works normally.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified instances or all instances. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes information for only those instances that meet the filter criteria. If you do not specify instance IDs or filters, the output includes information for all instances, which can affect performance. We recommend that you use pagination to ensure that the operation returns quickly and successfully. If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the output. Recently terminated instances might appear in the returned results. This interval is usually less than one hour. If you describe instances in the rare case where an Availability Zone is experiencing a service disruption and you specify instance IDs that are in the affected zone, or do not specify any instance IDs at all, the call fails. If you describe instances and specify only instance IDs that are in an unaffected zone, the call works normally.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeInstances(params: EC2.Types.DescribeInstancesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeInstancesResult) => void): Request<EC2.Types.DescribeInstancesResult, AWSError>;
   /**
-   * Describes the specified instances or all instances. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes information for only those instances that meet the filter criteria. If you do not specify instance IDs or filters, the output includes information for all instances, which can affect performance. We recommend that you use pagination to ensure that the operation returns quickly and successfully. If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the output. Recently terminated instances might appear in the returned results. This interval is usually less than one hour. If you describe instances in the rare case where an Availability Zone is experiencing a service disruption and you specify instance IDs that are in the affected zone, or do not specify any instance IDs at all, the call fails. If you describe instances and specify only instance IDs that are in an unaffected zone, the call works normally.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified instances or all instances. If you specify instance IDs, the output includes information for only the specified instances. If you specify filters, the output includes information for only those instances that meet the filter criteria. If you do not specify instance IDs or filters, the output includes information for all instances, which can affect performance. We recommend that you use pagination to ensure that the operation returns quickly and successfully. If you specify an instance ID that is not valid, an error is returned. If you specify an instance that you do not own, it is not included in the output. Recently terminated instances might appear in the returned results. This interval is usually less than one hour. If you describe instances in the rare case where an Availability Zone is experiencing a service disruption and you specify instance IDs that are in the affected zone, or do not specify any instance IDs at all, the call fails. If you describe instances and specify only instance IDs that are in an unaffected zone, the call works normally.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeInstances(callback?: (err: AWSError, data: EC2.Types.DescribeInstancesResult) => void): Request<EC2.Types.DescribeInstancesResult, AWSError>;
   /**
@@ -2437,11 +2437,11 @@ declare class EC2 extends Service {
    */
   describeNetworkInterfacePermissions(callback?: (err: AWSError, data: EC2.Types.DescribeNetworkInterfacePermissionsResult) => void): Request<EC2.Types.DescribeNetworkInterfacePermissionsResult, AWSError>;
   /**
-   * Describes one or more of your network interfaces. If you have a large number of network interfaces, the operation fails unless you use pagination or one of the following filters: group-id, mac-address, private-dns-name, private-ip-address, private-dns-name, subnet-id, or vpc-id.
+   * Describes one or more of your network interfaces. If you have a large number of network interfaces, the operation fails unless you use pagination or one of the following filters: group-id, mac-address, private-dns-name, private-ip-address, private-dns-name, subnet-id, or vpc-id.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts. 
    */
   describeNetworkInterfaces(params: EC2.Types.DescribeNetworkInterfacesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeNetworkInterfacesResult) => void): Request<EC2.Types.DescribeNetworkInterfacesResult, AWSError>;
   /**
-   * Describes one or more of your network interfaces. If you have a large number of network interfaces, the operation fails unless you use pagination or one of the following filters: group-id, mac-address, private-dns-name, private-ip-address, private-dns-name, subnet-id, or vpc-id.
+   * Describes one or more of your network interfaces. If you have a large number of network interfaces, the operation fails unless you use pagination or one of the following filters: group-id, mac-address, private-dns-name, private-ip-address, private-dns-name, subnet-id, or vpc-id.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts. 
    */
   describeNetworkInterfaces(callback?: (err: AWSError, data: EC2.Types.DescribeNetworkInterfacesResult) => void): Request<EC2.Types.DescribeNetworkInterfacesResult, AWSError>;
   /**
@@ -2589,11 +2589,11 @@ declare class EC2 extends Service {
    */
   describeSnapshotTierStatus(callback?: (err: AWSError, data: EC2.Types.DescribeSnapshotTierStatusResult) => void): Request<EC2.Types.DescribeSnapshotTierStatusResult, AWSError>;
   /**
-   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other Amazon Web Services accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All Amazon Web Services accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific Amazon Web Services account.    implicit: An Amazon Web Services account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or Amazon Web Services accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the Amazon Web Services account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify Amazon Web Services account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon EBS User Guide.
+   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other Amazon Web Services accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All Amazon Web Services accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific Amazon Web Services account.    implicit: An Amazon Web Services account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or Amazon Web Services accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the Amazon Web Services account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify Amazon Web Services account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon EBS User Guide.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts. 
    */
   describeSnapshots(params: EC2.Types.DescribeSnapshotsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeSnapshotsResult) => void): Request<EC2.Types.DescribeSnapshotsResult, AWSError>;
   /**
-   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other Amazon Web Services accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All Amazon Web Services accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific Amazon Web Services account.    implicit: An Amazon Web Services account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or Amazon Web Services accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the Amazon Web Services account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify Amazon Web Services account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon EBS User Guide.
+   * Describes the specified EBS snapshots available to you or all of the EBS snapshots available to you. The snapshots available to you include public snapshots, private snapshots that you own, and private snapshots owned by other Amazon Web Services accounts for which you have explicit create volume permissions. The create volume permissions fall into the following categories:    public: The owner of the snapshot granted create volume permissions for the snapshot to the all group. All Amazon Web Services accounts have create volume permissions for these snapshots.    explicit: The owner of the snapshot granted create volume permissions to a specific Amazon Web Services account.    implicit: An Amazon Web Services account has implicit create volume permissions for all snapshots it owns.   The list of snapshots returned can be filtered by specifying snapshot IDs, snapshot owners, or Amazon Web Services accounts with create volume permissions. If no options are specified, Amazon EC2 returns all snapshots for which you have create volume permissions. If you specify one or more snapshot IDs, only snapshots that have the specified IDs are returned. If you specify an invalid snapshot ID, an error is returned. If you specify a snapshot ID for which you do not have access, it is not included in the returned results. If you specify one or more snapshot owners using the OwnerIds option, only snapshots from the specified owners and for which you have access are returned. The results can include the Amazon Web Services account IDs of the specified owners, amazon for snapshots owned by Amazon, or self for snapshots that you own. If you specify a list of restorable users, only snapshots with create snapshot permissions for those users are returned. You can specify Amazon Web Services account IDs (if you own the snapshots), self for snapshots for which you own or have explicit permissions, or all for public snapshots. If you are describing a long list of snapshots, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. To get the state of fast snapshot restores for a snapshot, use DescribeFastSnapshotRestores. For more information about EBS snapshots, see Amazon EBS snapshots in the Amazon EBS User Guide.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts. 
    */
   describeSnapshots(callback?: (err: AWSError, data: EC2.Types.DescribeSnapshotsResult) => void): Request<EC2.Types.DescribeSnapshotsResult, AWSError>;
   /**
@@ -2669,11 +2669,11 @@ declare class EC2 extends Service {
    */
   describeSubnets(callback?: (err: AWSError, data: EC2.Types.DescribeSubnetsResult) => void): Request<EC2.Types.DescribeSubnetsResult, AWSError>;
   /**
-   * Describes the specified tags for your EC2 resources. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified tags for your EC2 resources. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeTags(params: EC2.Types.DescribeTagsRequest, callback?: (err: AWSError, data: EC2.Types.DescribeTagsResult) => void): Request<EC2.Types.DescribeTagsResult, AWSError>;
   /**
-   * Describes the specified tags for your EC2 resources. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified tags for your EC2 resources. For more information about tags, see Tag your Amazon EC2 resources in the Amazon Elastic Compute Cloud User Guide.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeTags(callback?: (err: AWSError, data: EC2.Types.DescribeTagsResult) => void): Request<EC2.Types.DescribeTagsResult, AWSError>;
   /**
@@ -2845,11 +2845,11 @@ declare class EC2 extends Service {
    */
   describeVolumeStatus(callback?: (err: AWSError, data: EC2.Types.DescribeVolumeStatusResult) => void): Request<EC2.Types.DescribeVolumeStatusResult, AWSError>;
   /**
-   * Describes the specified EBS volumes or all of your EBS volumes. If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. For more information about EBS volumes, see Amazon EBS volumes in the Amazon EBS User Guide.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified EBS volumes or all of your EBS volumes. If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. For more information about EBS volumes, see Amazon EBS volumes in the Amazon EBS User Guide.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeVolumes(params: EC2.Types.DescribeVolumesRequest, callback?: (err: AWSError, data: EC2.Types.DescribeVolumesResult) => void): Request<EC2.Types.DescribeVolumesResult, AWSError>;
   /**
-   * Describes the specified EBS volumes or all of your EBS volumes. If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. For more information about EBS volumes, see Amazon EBS volumes in the Amazon EBS User Guide.  The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
+   * Describes the specified EBS volumes or all of your EBS volumes. If you are describing a long list of volumes, we recommend that you paginate the output to make the list more manageable. For more information, see Pagination. For more information about EBS volumes, see Amazon EBS volumes in the Amazon EBS User Guide.  We strongly recommend using only paginated requests. Unpaginated requests are susceptible to throttling and timeouts.   The order of the elements in the response, including those within nested structures, might vary. Applications should not assume the elements appear in a particular order. 
    */
   describeVolumes(callback?: (err: AWSError, data: EC2.Types.DescribeVolumesResult) => void): Request<EC2.Types.DescribeVolumesResult, AWSError>;
   /**
@@ -3076,6 +3076,14 @@ declare class EC2 extends Service {
    * Cancels the deprecation of the specified AMI. For more information, see Deprecate an AMI in the Amazon EC2 User Guide.
    */
   disableImageDeprecation(callback?: (err: AWSError, data: EC2.Types.DisableImageDeprecationResult) => void): Request<EC2.Types.DisableImageDeprecationResult, AWSError>;
+  /**
+   * Disables deregistration protection for an AMI. When deregistration protection is disabled, the AMI can be deregistered. If you chose to include a 24-hour cooldown period when you enabled deregistration protection for the AMI, then, when you disable deregistration protection, you won’t immediately be able to deregister the AMI. For more information, see Protect an AMI from deregistration in the Amazon EC2 User Guide.
+   */
+  disableImageDeregistrationProtection(params: EC2.Types.DisableImageDeregistrationProtectionRequest, callback?: (err: AWSError, data: EC2.Types.DisableImageDeregistrationProtectionResult) => void): Request<EC2.Types.DisableImageDeregistrationProtectionResult, AWSError>;
+  /**
+   * Disables deregistration protection for an AMI. When deregistration protection is disabled, the AMI can be deregistered. If you chose to include a 24-hour cooldown period when you enabled deregistration protection for the AMI, then, when you disable deregistration protection, you won’t immediately be able to deregister the AMI. For more information, see Protect an AMI from deregistration in the Amazon EC2 User Guide.
+   */
+  disableImageDeregistrationProtection(callback?: (err: AWSError, data: EC2.Types.DisableImageDeregistrationProtectionResult) => void): Request<EC2.Types.DisableImageDeregistrationProtectionResult, AWSError>;
   /**
    * Disable the IPAM account. For more information, see Enable integration with Organizations in the Amazon VPC IPAM User Guide. 
    */
@@ -3316,6 +3324,14 @@ declare class EC2 extends Service {
    * Enables deprecation of the specified AMI at the specified date and time. For more information, see Deprecate an AMI in the Amazon EC2 User Guide.
    */
   enableImageDeprecation(callback?: (err: AWSError, data: EC2.Types.EnableImageDeprecationResult) => void): Request<EC2.Types.EnableImageDeprecationResult, AWSError>;
+  /**
+   * Enables deregistration protection for an AMI. When deregistration protection is enabled, the AMI can't be deregistered. To allow the AMI to be deregistered, you must first disable deregistration protection using DisableImageDeregistrationProtection. For more information, see Protect an AMI from deregistration in the Amazon EC2 User Guide.
+   */
+  enableImageDeregistrationProtection(params: EC2.Types.EnableImageDeregistrationProtectionRequest, callback?: (err: AWSError, data: EC2.Types.EnableImageDeregistrationProtectionResult) => void): Request<EC2.Types.EnableImageDeregistrationProtectionResult, AWSError>;
+  /**
+   * Enables deregistration protection for an AMI. When deregistration protection is enabled, the AMI can't be deregistered. To allow the AMI to be deregistered, you must first disable deregistration protection using DisableImageDeregistrationProtection. For more information, see Protect an AMI from deregistration in the Amazon EC2 User Guide.
+   */
+  enableImageDeregistrationProtection(callback?: (err: AWSError, data: EC2.Types.EnableImageDeregistrationProtectionResult) => void): Request<EC2.Types.EnableImageDeregistrationProtectionResult, AWSError>;
   /**
    * Enable an Organizations member account as the IPAM admin account. You cannot select the Organizations management account as the IPAM admin account. For more information, see Enable integration with Organizations in the Amazon VPC IPAM User Guide. 
    */
@@ -6714,11 +6730,11 @@ declare namespace EC2 {
      */
     CertificateS3BucketName?: String;
     /**
-     * The key of the Amazon S3 object ey where the certificate, certificate chain, and encrypted private key bundle is stored. The object key is formated as follows: role_arn/certificate_arn. 
+     * The key of the Amazon S3 object where the certificate, certificate chain, and encrypted private key bundle are stored. The object key is formatted as follows: role_arn/certificate_arn. 
      */
     CertificateS3ObjectKey?: String;
     /**
-     * The ID of the KMS customer master key (CMK) used to encrypt the private key.
+     * The ID of the KMS key used to encrypt the private key.
      */
     EncryptionKmsKeyId?: String;
   }
@@ -9812,7 +9828,7 @@ declare namespace EC2 {
      */
     LaunchTemplateData: RequestLaunchTemplateData;
     /**
-     * The tags to apply to the launch template on creation. To tag the launch template, the resource type must be launch-template.  To specify the tags for the resources that are created when an instance is launched, you must use the TagSpecifications parameter in the launch template data structure. 
+     * The tags to apply to the launch template on creation. To tag the launch template, the resource type must be launch-template. To specify the tags for the resources that are created when an instance is launched, you must use the TagSpecifications parameter in the launch template data structure.
      */
     TagSpecifications?: TagSpecificationList;
   }
@@ -9836,15 +9852,15 @@ declare namespace EC2 {
      */
     ClientToken?: String;
     /**
-     * The ID of the launch template. You must specify either the LaunchTemplateId or the LaunchTemplateName, but not both.
+     * The ID of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateId?: LaunchTemplateId;
     /**
-     * The name of the launch template. You must specify the LaunchTemplateName or the LaunchTemplateId, but not both.
+     * The name of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateName?: LaunchTemplateName;
     /**
-     * The version number of the launch template version on which to base the new version. The new version inherits the same launch parameters as the source version, except for parameters that you specify in LaunchTemplateData. Snapshots applied to the block device mapping are ignored when creating a new version unless they are explicitly included.
+     * The version of the launch template on which to base the new version. Snapshots applied to the block device mapping are ignored when creating a new version unless they are explicitly included. If you specify this parameter, the new version inherits the launch parameters from the source version. If you specify additional launch parameters for the new version, they overwrite any corresponding launch parameters inherited from the source version. If you omit this parameter, the new version contains only the launch parameters that you specify for the new version.
      */
     SourceVersion?: String;
     /**
@@ -12454,11 +12470,11 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The ID of the launch template. You must specify either the LaunchTemplateId or the LaunchTemplateName, but not both.
+     * The ID of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateId?: LaunchTemplateId;
     /**
-     * The name of the launch template. You must specify either the LaunchTemplateName or the LaunchTemplateId, but not both.
+     * The name of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateName?: LaunchTemplateName;
   }
@@ -12474,11 +12490,11 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The ID of the launch template. You must specify either the LaunchTemplateId or the LaunchTemplateName, but not both.
+     * The ID of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateId?: LaunchTemplateId;
     /**
-     * The name of the launch template. You must specify either the LaunchTemplateName or the LaunchTemplateId, but not both.
+     * The name of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateName?: LaunchTemplateName;
     /**
@@ -15556,11 +15572,11 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The ID of the launch template. To describe one or more versions of a specified launch template, you must specify either the LaunchTemplateId or the LaunchTemplateName, but not both. To describe all the latest or default launch template versions in your account, you must omit this parameter.
+     * The ID of the launch template. To describe one or more versions of a specified launch template, you must specify either the launch template ID or the launch template name, but not both. To describe all the latest or default launch template versions in your account, you must omit this parameter.
      */
     LaunchTemplateId?: LaunchTemplateId;
     /**
-     * The name of the launch template. To describe one or more versions of a specified launch template, you must specify either the LaunchTemplateName or the LaunchTemplateId, but not both. To describe all the latest or default launch template versions in your account, you must omit this parameter.
+     * The name of the launch template. To describe one or more versions of a specified launch template, you must specify either the launch template name or the launch template ID, but not both. To describe all the latest or default launch template versions in your account, you must omit this parameter.
      */
     LaunchTemplateName?: LaunchTemplateName;
     /**
@@ -16266,7 +16282,7 @@ declare namespace EC2 {
   }
   export interface DescribeNetworkInterfacesResult {
     /**
-     * Information about one or more network interfaces.
+     * Information about the network interfaces.
      */
     NetworkInterfaces?: NetworkInterfaceList;
     /**
@@ -17189,7 +17205,7 @@ declare namespace EC2 {
      */
     DryRun?: Boolean;
     /**
-     * The filters.    key - The tag key.    resource-id - The ID of the resource.    resource-type - The resource type (customer-gateway | dedicated-host | dhcp-options | elastic-ip | fleet | fpga-image | host-reservation | image | instance | internet-gateway | key-pair | launch-template | natgateway | network-acl | network-interface | placement-group | reserved-instances | route-table | security-group | snapshot | spot-instances-request | subnet | volume | vpc | vpc-endpoint | vpc-endpoint-service | vpc-peering-connection | vpn-connection | vpn-gateway).    tag:&lt;key&gt; - The key/value combination of the tag. For example, specify "tag:Owner" for the filter name and "TeamA" for the filter value to find resources with the tag "Owner=TeamA".    value - The tag value.  
+     * The filters.    key - The tag key.    resource-id - The ID of the resource.    resource-type - The resource type. For a list of possible values, see TagSpecification.    tag:&lt;key&gt; - The key/value combination of the tag. For example, specify "tag:Owner" for the filter name and "TeamA" for the filter value to find resources with the tag "Owner=TeamA".    value - The tag value.  
      */
     Filters?: FilterList;
     /**
@@ -18774,6 +18790,22 @@ declare namespace EC2 {
      */
     Return?: Boolean;
   }
+  export interface DisableImageDeregistrationProtectionRequest {
+    /**
+     * The ID of the AMI.
+     */
+    ImageId: ImageId;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface DisableImageDeregistrationProtectionResult {
+    /**
+     * Returns true if the request succeeds; otherwise, it returns an error.
+     */
+    Return?: String;
+  }
   export interface DisableImageRequest {
     /**
      * The ID of the AMI.
@@ -19923,6 +19955,26 @@ declare namespace EC2 {
      */
     Return?: Boolean;
   }
+  export interface EnableImageDeregistrationProtectionRequest {
+    /**
+     * The ID of the AMI.
+     */
+    ImageId: ImageId;
+    /**
+     * If true, enforces deregistration protection for 24 hours after deregistration protection is disabled.
+     */
+    WithCooldown?: Boolean;
+    /**
+     * Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is DryRunOperation. Otherwise, it is UnauthorizedOperation.
+     */
+    DryRun?: Boolean;
+  }
+  export interface EnableImageDeregistrationProtectionResult {
+    /**
+     * Returns true if the request succeeds; otherwise, it returns an error.
+     */
+    Return?: String;
+  }
   export interface EnableImageRequest {
     /**
      * The ID of the AMI.
@@ -23213,6 +23265,14 @@ declare namespace EC2 {
      * The ID of the instance that the AMI was created from if the AMI was created using CreateImage. This field only appears if the AMI was created using CreateImage.
      */
     SourceInstanceId?: String;
+    /**
+     * Indicates whether deregistration protection is enabled for the AMI.
+     */
+    DeregistrationProtection?: String;
+    /**
+     * The date and time, in ISO 8601 date-time format, when the AMI was last used to launch an EC2 instance. When the AMI is used to launch an instance, there is a 24-hour delay before that usage is reported.   lastLaunchedTime data is available starting April 2017. 
+     */
+    LastLaunchedTime?: String;
   }
   export interface ImageAttribute {
     /**
@@ -23267,8 +23327,12 @@ declare namespace EC2 {
      * If v2.0, it indicates that IMDSv2 is specified in the AMI. Instances launched from this AMI will have HttpTokens automatically set to required so that, by default, the instance requires that IMDSv2 is used when requesting instance metadata. In addition, HttpPutResponseHopLimit is set to 2. For more information, see Configure the AMI in the Amazon EC2 User Guide.
      */
     ImdsSupport?: AttributeValue;
+    /**
+     * Indicates whether deregistration protection is enabled for the AMI.
+     */
+    DeregistrationProtection?: AttributeValue;
   }
-  export type ImageAttributeName = "description"|"kernel"|"ramdisk"|"launchPermission"|"productCodes"|"blockDeviceMapping"|"sriovNetSupport"|"bootMode"|"tpmSupport"|"uefiData"|"lastLaunchedTime"|"imdsSupport"|string;
+  export type ImageAttributeName = "description"|"kernel"|"ramdisk"|"launchPermission"|"productCodes"|"blockDeviceMapping"|"sriovNetSupport"|"bootMode"|"tpmSupport"|"uefiData"|"lastLaunchedTime"|"imdsSupport"|"deregistrationProtection"|string;
   export type ImageBlockPublicAccessDisabledState = "unblocked"|string;
   export type ImageBlockPublicAccessEnabledState = "block-new-sharing"|string;
   export interface ImageDiskContainer {
@@ -27197,15 +27261,15 @@ declare namespace EC2 {
   export type LaunchTemplateSet = LaunchTemplate[];
   export interface LaunchTemplateSpecification {
     /**
-     * The ID of the launch template. You must specify the LaunchTemplateId or the LaunchTemplateName, but not both.
+     * The ID of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateId?: LaunchTemplateId;
     /**
-     * The name of the launch template. You must specify the LaunchTemplateName or the LaunchTemplateId, but not both.
+     * The name of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateName?: String;
     /**
-     * The launch template version number, $Latest, or $Default. If the value is $Latest, Amazon EC2 uses the latest version of the launch template. If the value is $Default, Amazon EC2 uses the default version of the launch template. Default: The default version of the launch template.
+     * The launch template version number, $Latest, or $Default. A value of $Latest uses the latest version of the launch template. A value of $Default uses the default version of the launch template. Default: The default version of the launch template.
      */
     Version?: String;
   }
@@ -28861,11 +28925,11 @@ declare namespace EC2 {
      */
     ClientToken?: String;
     /**
-     * The ID of the launch template. You must specify either the LaunchTemplateId or the LaunchTemplateName, but not both.
+     * The ID of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateId?: LaunchTemplateId;
     /**
-     * The name of the launch template. You must specify either the LaunchTemplateName or the LaunchTemplateId, but not both.
+     * The name of the launch template. You must specify either the launch template ID or the launch template name, but not both.
      */
     LaunchTemplateName?: LaunchTemplateName;
     /**
@@ -34558,7 +34622,7 @@ declare namespace EC2 {
      */
     TagSpecifications?: TagSpecificationList;
     /**
-     * The launch template to use to launch the instances. Any parameters that you specify in RunInstances override the same parameters in the launch template. You can specify either the name or ID of a launch template, but not both.
+     * The launch template. Any additional parameters that you specify for the new instance overwrite the corresponding parameters included in the launch template.
      */
     LaunchTemplate?: LaunchTemplateSpecification;
     /**

package/clients/pi.d.ts

@@ -60,11 +60,11 @@ declare class PI extends Service {
    */
   getResourceMetadata(callback?: (err: AWSError, data: PI.Types.GetResourceMetadataResponse) => void): Request<PI.Types.GetResourceMetadataResponse, AWSError>;
   /**
-   * Retrieve Performance Insights metrics for a set of data sources over a time period. You can provide specific dimension groups and dimensions, and provide aggregation and filtering criteria for each group.  Each response element returns a maximum of 500 bytes. For larger elements, such as SQL statements, only the first 500 bytes are returned. 
+   * Retrieve Performance Insights metrics for a set of data sources over a time period. You can provide specific dimension groups and dimensions, and provide filtering criteria for each group. You must specify an aggregate function for each metric.  Each response element returns a maximum of 500 bytes. For larger elements, such as SQL statements, only the first 500 bytes are returned. 
    */
   getResourceMetrics(params: PI.Types.GetResourceMetricsRequest, callback?: (err: AWSError, data: PI.Types.GetResourceMetricsResponse) => void): Request<PI.Types.GetResourceMetricsResponse, AWSError>;
   /**
-   * Retrieve Performance Insights metrics for a set of data sources over a time period. You can provide specific dimension groups and dimensions, and provide aggregation and filtering criteria for each group.  Each response element returns a maximum of 500 bytes. For larger elements, such as SQL statements, only the first 500 bytes are returned. 
+   * Retrieve Performance Insights metrics for a set of data sources over a time period. You can provide specific dimension groups and dimensions, and provide filtering criteria for each group. You must specify an aggregate function for each metric.  Each response element returns a maximum of 500 bytes. For larger elements, such as SQL statements, only the first 500 bytes are returned. 
    */
   getResourceMetrics(callback?: (err: AWSError, data: PI.Types.GetResourceMetricsResponse) => void): Request<PI.Types.GetResourceMetricsResponse, AWSError>;
   /**
@@ -487,7 +487,7 @@ declare namespace PI {
      */
     Identifier: IdentifierString;
     /**
-     * An array of one or more queries to perform. Each query must specify a Performance Insights metric, and can optionally specify aggregation and filtering criteria.
+     * An array of one or more queries to perform. Each query must specify a Performance Insights metric and specify an aggregate function, and you can provide filtering criteria. You must append the aggregate function to the metric. For example, to find the average for the metric db.load you must use db.load.avg. Valid values for aggregate functions include .avg, .min, .max, and .sum.
      */
     MetricQueries: MetricQueryList;
     /**
@@ -726,7 +726,7 @@ declare namespace PI {
   export type MetricKeyDataPointsList = MetricKeyDataPoints[];
   export interface MetricQuery {
     /**
-     * The name of a Performance Insights metric to be measured. Valid values for Metric are:    db.load.avg - A scaled representation of the number of active sessions for the database engine.    db.sampledload.avg - The raw number of active sessions for the database engine.   The counter metrics listed in Performance Insights operating system counters in the Amazon Aurora User Guide.   If the number of active sessions is less than an internal Performance Insights threshold, db.load.avg and db.sampledload.avg are the same value. If the number of active sessions is greater than the internal threshold, Performance Insights samples the active sessions, with db.load.avg showing the scaled values, db.sampledload.avg showing the raw values, and db.sampledload.avg less than db.load.avg. For most use cases, you can query db.load.avg only.
+     * The name of a Performance Insights metric to be measured. Valid values for Metric are:    db.load.avg - A scaled representation of the number of active sessions for the database engine.    db.sampledload.avg - The raw number of active sessions for the database engine.   The counter metrics listed in Performance Insights operating system counters in the Amazon Aurora User Guide.   The counter metrics listed in Performance Insights operating system counters in the Amazon RDS User Guide.   If the number of active sessions is less than an internal Performance Insights threshold, db.load.avg and db.sampledload.avg are the same value. If the number of active sessions is greater than the internal threshold, Performance Insights samples the active sessions, with db.load.avg showing the scaled values, db.sampledload.avg showing the raw values, and db.sampledload.avg less than db.load.avg. For most use cases, you can query db.load.avg only.
      */
     Metric: RequestString;
     /**
@@ -799,7 +799,7 @@ declare namespace PI {
   }
   export interface ResponseResourceMetricKey {
     /**
-     * The name of a Performance Insights metric to be measured. Valid values for Metric are:    db.load.avg - A scaled representation of the number of active sessions for the database engine.    db.sampledload.avg - The raw number of active sessions for the database engine.   The counter metrics listed in Performance Insights operating system counters in the Amazon Aurora User Guide.   If the number of active sessions is less than an internal Performance Insights threshold, db.load.avg and db.sampledload.avg are the same value. If the number of active sessions is greater than the internal threshold, Performance Insights samples the active sessions, with db.load.avg showing the scaled values, db.sampledload.avg showing the raw values, and db.sampledload.avg less than db.load.avg. For most use cases, you can query db.load.avg only. 
+     * The name of a Performance Insights metric to be measured. Valid values for Metric are:    db.load.avg - A scaled representation of the number of active sessions for the database engine.    db.sampledload.avg - The raw number of active sessions for the database engine.   The counter metrics listed in Performance Insights operating system counters in the Amazon Aurora User Guide.   The counter metrics listed in Performance Insights operating system counters in the Amazon RDS User Guide.   If the number of active sessions is less than an internal Performance Insights threshold, db.load.avg and db.sampledload.avg are the same value. If the number of active sessions is greater than the internal threshold, Performance Insights samples the active sessions, with db.load.avg showing the scaled values, db.sampledload.avg showing the raw values, and db.sampledload.avg less than db.load.avg. For most use cases, you can query db.load.avg only. 
      */
     Metric: String;
     /**

package/clients/rds.d.ts

@@ -7254,7 +7254,7 @@ declare namespace RDS {
   export type MinimumEngineVersionPerAllowedValueList = MinimumEngineVersionPerAllowedValue[];
   export interface ModifyActivityStreamRequest {
     /**
-     * The Amazon Resource Name (ARN) of the RDS for Oracle or Microsoft SQL Server DB instance. For example, arn:aws:rds:us-east-1:12345667890:instance:my-orcl-db.
+     * The Amazon Resource Name (ARN) of the RDS for Oracle or Microsoft SQL Server DB instance. For example, arn:aws:rds:us-east-1:12345667890:db:my-orcl-db.
      */
     ResourceArn?: String;
     /**