aws-sdk 2.1599.0 → 2.1601.0

package/clients/iotwireless.d.ts

@@ -132,11 +132,11 @@ declare class IoTWireless extends Service {
    */
   createWirelessDevice(callback?: (err: AWSError, data: IoTWireless.Types.CreateWirelessDeviceResponse) => void): Request<IoTWireless.Types.CreateWirelessDeviceResponse, AWSError>;
   /**
-   * Provisions a wireless gateway.
+   * Provisions a wireless gateway.  When provisioning a wireless gateway, you might run into duplication errors for the following reasons.   If you specify a GatewayEui value that already exists.   If you used a ClientRequestToken with the same parameters within the last 10 minutes.   To avoid this error, make sure that you use unique identifiers and parameters for each request within the specified time period. 
    */
   createWirelessGateway(params: IoTWireless.Types.CreateWirelessGatewayRequest, callback?: (err: AWSError, data: IoTWireless.Types.CreateWirelessGatewayResponse) => void): Request<IoTWireless.Types.CreateWirelessGatewayResponse, AWSError>;
   /**
-   * Provisions a wireless gateway.
+   * Provisions a wireless gateway.  When provisioning a wireless gateway, you might run into duplication errors for the following reasons.   If you specify a GatewayEui value that already exists.   If you used a ClientRequestToken with the same parameters within the last 10 minutes.   To avoid this error, make sure that you use unique identifiers and parameters for each request within the specified time period. 
    */
   createWirelessGateway(callback?: (err: AWSError, data: IoTWireless.Types.CreateWirelessGatewayResponse) => void): Request<IoTWireless.Types.CreateWirelessGatewayResponse, AWSError>;
   /**
@@ -228,11 +228,11 @@ declare class IoTWireless extends Service {
    */
   deleteWirelessDeviceImportTask(callback?: (err: AWSError, data: IoTWireless.Types.DeleteWirelessDeviceImportTaskResponse) => void): Request<IoTWireless.Types.DeleteWirelessDeviceImportTaskResponse, AWSError>;
   /**
-   * Deletes a wireless gateway.
+   * Deletes a wireless gateway.  When deleting a wireless gateway, you might run into duplication errors for the following reasons.   If you specify a GatewayEui value that already exists.   If you used a ClientRequestToken with the same parameters within the last 10 minutes.   To avoid this error, make sure that you use unique identifiers and parameters for each request within the specified time period. 
    */
   deleteWirelessGateway(params: IoTWireless.Types.DeleteWirelessGatewayRequest, callback?: (err: AWSError, data: IoTWireless.Types.DeleteWirelessGatewayResponse) => void): Request<IoTWireless.Types.DeleteWirelessGatewayResponse, AWSError>;
   /**
-   * Deletes a wireless gateway.
+   * Deletes a wireless gateway.  When deleting a wireless gateway, you might run into duplication errors for the following reasons.   If you specify a GatewayEui value that already exists.   If you used a ClientRequestToken with the same parameters within the last 10 minutes.   To avoid this error, make sure that you use unique identifiers and parameters for each request within the specified time period. 
    */
   deleteWirelessGateway(callback?: (err: AWSError, data: IoTWireless.Types.DeleteWirelessGatewayResponse) => void): Request<IoTWireless.Types.DeleteWirelessGatewayResponse, AWSError>;
   /**
@@ -356,19 +356,19 @@ declare class IoTWireless extends Service {
    */
   getLogLevelsByResourceTypes(callback?: (err: AWSError, data: IoTWireless.Types.GetLogLevelsByResourceTypesResponse) => void): Request<IoTWireless.Types.GetLogLevelsByResourceTypesResponse, AWSError>;
   /**
-   * Get the metric configuration status for this account.
+   * Get the metric configuration status for this AWS account.
    */
   getMetricConfiguration(params: IoTWireless.Types.GetMetricConfigurationRequest, callback?: (err: AWSError, data: IoTWireless.Types.GetMetricConfigurationResponse) => void): Request<IoTWireless.Types.GetMetricConfigurationResponse, AWSError>;
   /**
-   * Get the metric configuration status for this account.
+   * Get the metric configuration status for this AWS account.
    */
   getMetricConfiguration(callback?: (err: AWSError, data: IoTWireless.Types.GetMetricConfigurationResponse) => void): Request<IoTWireless.Types.GetMetricConfigurationResponse, AWSError>;
   /**
-   * Get metrics.
+   * Get the summary metrics for this AWS account.
    */
   getMetrics(params: IoTWireless.Types.GetMetricsRequest, callback?: (err: AWSError, data: IoTWireless.Types.GetMetricsResponse) => void): Request<IoTWireless.Types.GetMetricsResponse, AWSError>;
   /**
-   * Get metrics.
+   * Get the summary metrics for this AWS account.
    */
   getMetrics(callback?: (err: AWSError, data: IoTWireless.Types.GetMetricsResponse) => void): Request<IoTWireless.Types.GetMetricsResponse, AWSError>;
   /**
@@ -828,11 +828,11 @@ declare class IoTWireless extends Service {
    */
   updateLogLevelsByResourceTypes(callback?: (err: AWSError, data: IoTWireless.Types.UpdateLogLevelsByResourceTypesResponse) => void): Request<IoTWireless.Types.UpdateLogLevelsByResourceTypesResponse, AWSError>;
   /**
-   * Update the metric configuration.
+   * Update the summary metric configuration.
    */
   updateMetricConfiguration(params: IoTWireless.Types.UpdateMetricConfigurationRequest, callback?: (err: AWSError, data: IoTWireless.Types.UpdateMetricConfigurationResponse) => void): Request<IoTWireless.Types.UpdateMetricConfigurationResponse, AWSError>;
   /**
-   * Update the metric configuration.
+   * Update the summary metric configuration.
    */
   updateMetricConfiguration(callback?: (err: AWSError, data: IoTWireless.Types.UpdateMetricConfigurationResponse) => void): Request<IoTWireless.Types.UpdateMetricConfigurationResponse, AWSError>;
   /**
@@ -979,7 +979,7 @@ declare namespace IoTWireless {
      */
     Sidewalk: SidewalkAccountInfo;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
     /**
@@ -1235,7 +1235,7 @@ declare namespace IoTWireless {
      */
     Tags?: TagList;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
   }
@@ -1263,7 +1263,7 @@ declare namespace IoTWireless {
      */
     Tags?: TagList;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
     /**
@@ -1304,7 +1304,7 @@ declare namespace IoTWireless {
      */
     Description?: Description;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
     LoRaWAN: LoRaWANMulticast;
@@ -1354,7 +1354,7 @@ declare namespace IoTWireless {
      */
     Tags?: TagList;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
   }
@@ -1386,7 +1386,7 @@ declare namespace IoTWireless {
      */
     DestinationName: DestinationName;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
     /**
@@ -1434,7 +1434,7 @@ declare namespace IoTWireless {
      */
     Tags?: TagList;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
   }
@@ -1462,7 +1462,7 @@ declare namespace IoTWireless {
      */
     Update?: UpdateWirelessGatewayTaskCreate;
     /**
-     * Each resource must have a unique client request token. If you try to create a new resource with the same token as a resource that already exists, an exception occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. 
+     * Each resource must have a unique client request token. The client token is used to implement idempotency. It ensures that the request completes no more than one time. If you retry a request with the same token and the same parameters, the request will complete successfully. However, if you try to create a new resource using the same token but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request. For more information about idempotency, see Ensuring idempotency in Amazon EC2 API requests.
      */
     ClientRequestToken?: ClientRequestToken;
     /**
@@ -1775,6 +1775,7 @@ declare namespace IoTWireless {
   }
   export interface DisassociateWirelessGatewayFromThingResponse {
   }
+  export type DlAllowed = boolean;
   export type DlBucketSize = number;
   export type DlClass = "ClassB"|"ClassC"|string;
   export type DlDr = number;
@@ -2014,19 +2015,19 @@ declare namespace IoTWireless {
   }
   export interface GetMetricConfigurationResponse {
     /**
-     * The account's configuration status for summary metric aggregation.
+     * The configuration status of the AWS account for summary metric aggregation.
      */
     SummaryMetric?: SummaryMetricConfiguration;
   }
   export interface GetMetricsRequest {
     /**
-     * The list of queries to retrieve summary metrics.
+     * The list of queries to retrieve the summary metrics.
      */
     SummaryMetricQueries?: SummaryMetricQueries;
   }
   export interface GetMetricsResponse {
     /**
-     * The list of retrieved metrics.
+     * The list of summary metrics that were retrieved.
      */
     SummaryMetricQueryResults?: SummaryMetricQueryResults;
   }
@@ -2660,6 +2661,7 @@ declare namespace IoTWireless {
   export type HrAllowed = boolean;
   export type IPAddress = string;
   export type ISODateTimeString = string;
+  export type Id = string;
   export type Identifier = string;
   export type IdentifierType = "PartnerAccountId"|"DevEui"|"GatewayEui"|"WirelessDeviceId"|"WirelessGatewayId"|string;
   export type ImportTaskArn = string;
@@ -3142,6 +3144,10 @@ declare namespace IoTWireless {
      * Information about the gateways accessed by the device.
      */
     Gateways?: LoRaWANGatewayMetadataList;
+    /**
+     * Information about the LoRaWAN public network accessed by the device.
+     */
+    PublicGateways?: LoRaWANPublicGatewayMetadataList;
   }
   export interface LoRaWANDeviceProfile {
     /**
@@ -3403,6 +3409,30 @@ declare namespace IoTWireless {
      */
     PingSlotPeriod?: PingSlotPeriod;
   }
+  export interface LoRaWANPublicGatewayMetadata {
+    /**
+     * The ID of the LoRaWAN public network provider.
+     */
+    ProviderNetId?: ProviderNetId;
+    /**
+     * The ID of the gateways that are operated by the network provider.
+     */
+    Id?: Id;
+    /**
+     * The RSSI (received signal strength indicator) value.
+     */
+    Rssi?: Double;
+    /**
+     * The SNR (signal to noise ratio) value.
+     */
+    Snr?: Double;
+    RfRegion?: RfRegion;
+    /**
+     * Boolean that indicates whether downlink is allowed using the network.
+     */
+    DlAllowed?: DlAllowed;
+  }
+  export type LoRaWANPublicGatewayMetadataList = LoRaWANPublicGatewayMetadata[];
   export interface LoRaWANSendDataToDevice {
     FPort?: FPort;
     /**
@@ -3595,27 +3625,27 @@ declare namespace IoTWireless {
   export type MetricQueryTimestamps = MetricQueryTimestamp[];
   export interface MetricQueryValue {
     /**
-     * The minimum of the values of the all data points collected during the period.
+     * The minimum of the values of all data points collected during the aggregation period.
      */
     Min?: Min;
     /**
-     * The maximum of the values of the all data points collected during the period.
+     * The maximum of the values of all the data points collected during the aggregation period.
      */
     Max?: Max;
     /**
-     * The sum of the values of the all data points collected during the period.
+     * The sum of the values of all data points collected during the aggregation period.
      */
     Sum?: Sum;
     /**
-     * The average of the values of the all data points collected during the period.
+     * The average of the values of all data points collected during the aggregation period.
      */
     Avg?: Avg;
     /**
-     * The standard deviation of the values of the all data points collected during the period.
+     * The standard deviation of the values of all data points collected during the aggregation period.
      */
     Std?: Std;
     /**
-     * The 90th percentile of the values of the all data points collected during the period.
+     * The 90th percentile of the values of all data points collected during the aggregation period.
      */
     P90?: P90;
   }
@@ -3777,6 +3807,7 @@ declare namespace IoTWireless {
   export type PrAllowed = boolean;
   export type PresetFreq = number;
   export type PrivateKeysList = CertificateList[];
+  export type ProviderNetId = string;
   export interface ProximityEventConfiguration {
     /**
      * Proximity event configuration object for enabling or disabling Sidewalk related event topics.
@@ -4235,7 +4266,7 @@ declare namespace IoTWireless {
   export type Sum = number;
   export interface SummaryMetricConfiguration {
     /**
-     * The configuration of summary metric.
+     * The status of the configuration of summary metrics.
      */
     Status?: SummaryMetricConfigurationStatus;
   }
@@ -4243,7 +4274,7 @@ declare namespace IoTWireless {
   export type SummaryMetricQueries = SummaryMetricQuery[];
   export interface SummaryMetricQuery {
     /**
-     * The id of the query.
+     * The id of the summary metric query.
      */
     QueryId?: MetricQueryId;
     /**
@@ -4251,37 +4282,37 @@ declare namespace IoTWireless {
      */
     MetricName?: MetricName;
     /**
-     * The dimensions of the metric.
+     * The dimensions of the summary metric.
      */
     Dimensions?: Dimensions;
     /**
-     * The aggregation period of the metric.
+     * The aggregation period of the summary metric.
      */
     AggregationPeriod?: AggregationPeriod;
     /**
-     * The start timestamp for summary metric query.
+     * The start timestamp for the summary metric query.
      */
     StartTimestamp?: MetricQueryStartTimestamp;
     /**
-     * The end timestamp for summary metric query.
+     * The end timestamp for the summary metric query.
      */
     EndTimestamp?: MetricQueryEndTimestamp;
   }
   export interface SummaryMetricQueryResult {
     /**
-     * The id of the query.
+     * The ID of the summary metric results query operation.
      */
     QueryId?: MetricQueryId;
     /**
-     * The status of the metric query.
+     * The status of the summary metric query result.
      */
     QueryStatus?: MetricQueryStatus;
     /**
-     * The error message for the summary metric query.
+     * The error message for the summary metric query result.
      */
     Error?: MetricQueryError;
     /**
-     * The name of the metric.
+     * The name of the summary metric query result.
      */
     MetricName?: MetricName;
     /**
@@ -4293,11 +4324,11 @@ declare namespace IoTWireless {
      */
     AggregationPeriod?: AggregationPeriod;
     /**
-     * The start timestamp for summary metric query.
+     * The start timestamp for the summary metric query.
      */
     StartTimestamp?: MetricQueryStartTimestamp;
     /**
-     * The end timestamp for summary metric query.
+     * The end timestamp for the summary metric query.
      */
     EndTimestamp?: MetricQueryEndTimestamp;
     /**
@@ -4305,7 +4336,7 @@ declare namespace IoTWireless {
      */
     Timestamps?: MetricQueryTimestamps;
     /**
-     * The list of aggregated metrics.
+     * The list of aggregated summary metric query results.
      */
     Values?: MetricQueryValues;
     /**

package/clients/lakeformation.d.ts

@@ -682,10 +682,14 @@ declare namespace LakeFormation {
      * A list of the account IDs of Amazon Web Services accounts of third-party applications that are allowed to access data managed by Lake Formation.
      */
     ExternalFiltering?: ExternalFilteringConfiguration;
+    /**
+     * A list of Amazon Web Services account IDs and/or Amazon Web Services organization/organizational unit ARNs that are allowed to access data managed by Lake Formation.  If the ShareRecipients list includes valid values, a resource share is created with the principals you want to have access to the resources. If the ShareRecipients value is null or the list is empty, no resource share is created.
+     */
+    ShareRecipients?: DataLakePrincipalList;
   }
   export interface CreateLakeFormationIdentityCenterConfigurationResponse {
     /**
-     * The Amazon Resource Name (ARN) of the integrated application.
+     * The Amazon Resource Name (ARN) of the Lake Formation application integrated with IAM Identity Center.
      */
     ApplicationArn?: ApplicationArn;
   }
@@ -930,13 +934,21 @@ declare namespace LakeFormation {
      */
     InstanceArn?: IdentityCenterInstanceArn;
     /**
-     * The Amazon Resource Name (ARN) of the integrated application.
+     * The Amazon Resource Name (ARN) of the Lake Formation application integrated with IAM Identity Center.
      */
     ApplicationArn?: ApplicationArn;
     /**
      * Indicates if external filtering is enabled.
      */
     ExternalFiltering?: ExternalFilteringConfiguration;
+    /**
+     * A list of Amazon Web Services account IDs or Amazon Web Services organization/organizational unit ARNs that are allowed to access data managed by Lake Formation.  If the ShareRecipients list includes valid values, a resource share is created with the principals you want to have access to the resources as the ShareRecipients. If the ShareRecipients value is null or the list is empty, no resource share is created.
+     */
+    ShareRecipients?: DataLakePrincipalList;
+    /**
+     * The Amazon Resource Name (ARN) of the RAM share.
+     */
+    ResourceShare?: RAMResourceShareArn;
   }
   export interface DescribeResourceRequest {
     /**
@@ -2264,6 +2276,10 @@ declare namespace LakeFormation {
      * The identifier for the Data Catalog. By default, the account ID. The Data Catalog is the persistent metadata store. It contains database definitions, table definitions, view definitions, and other control information to manage your Lake Formation environment.
      */
     CatalogId?: CatalogIdString;
+    /**
+     * A list of Amazon Web Services account IDs or Amazon Web Services organization/organizational unit ARNs that are allowed to access to access data managed by Lake Formation.  If the ShareRecipients list includes valid values, then the resource share is updated with the principals you want to have access to the resources. If the ShareRecipients value is null, both the list of share recipients and the resource share remain unchanged. If the ShareRecipients value is an empty list, then the existing share recipients list will be cleared, and the resource share will be deleted.
+     */
+    ShareRecipients?: DataLakePrincipalList;
     /**
      * Allows to enable or disable the IAM Identity Center connection.
      */

package/clients/m2.d.ts

@@ -167,6 +167,14 @@ declare class M2 extends Service {
    * Lists historical, current, and scheduled batch job executions for a specific application.
    */
   listBatchJobExecutions(callback?: (err: AWSError, data: M2.Types.ListBatchJobExecutionsResponse) => void): Request<M2.Types.ListBatchJobExecutionsResponse, AWSError>;
+  /**
+   * Lists all the job steps for JCL files to restart a batch job. This is only applicable for Micro Focus engine with versions 8.0.6 and above.
+   */
+  listBatchJobRestartPoints(params: M2.Types.ListBatchJobRestartPointsRequest, callback?: (err: AWSError, data: M2.Types.ListBatchJobRestartPointsResponse) => void): Request<M2.Types.ListBatchJobRestartPointsResponse, AWSError>;
+  /**
+   * Lists all the job steps for JCL files to restart a batch job. This is only applicable for Micro Focus engine with versions 8.0.6 and above.
+   */
+  listBatchJobRestartPoints(callback?: (err: AWSError, data: M2.Types.ListBatchJobRestartPointsResponse) => void): Request<M2.Types.ListBatchJobRestartPointsResponse, AWSError>;
   /**
    * Lists the data set imports for the specified application.
    */
@@ -382,7 +390,7 @@ declare namespace M2 {
     scriptBatchJobDefinition?: ScriptBatchJobDefinition;
   }
   export type BatchJobDefinitions = BatchJobDefinition[];
-  export type BatchJobExecutionStatus = "Submitting"|"Holding"|"Dispatching"|"Running"|"Cancelling"|"Cancelled"|"Succeeded"|"Failed"|"Succeeded With Warning"|string;
+  export type BatchJobExecutionStatus = "Submitting"|"Holding"|"Dispatching"|"Running"|"Cancelling"|"Cancelled"|"Succeeded"|"Failed"|"Purged"|"Succeeded With Warning"|string;
   export interface BatchJobExecutionSummary {
     /**
      * The unique identifier of the application that hosts this batch job.
@@ -431,6 +439,10 @@ declare namespace M2 {
      * Specifies a file associated with a specific batch job.
      */
     fileBatchJobIdentifier?: FileBatchJobIdentifier;
+    /**
+     * Specifies the required information for restart, including execution ID and jobsteprestartmarker.
+     */
+    restartBatchJobIdentifier?: RestartBatchJobIdentifier;
     /**
      * Specifies an Amazon S3 location that identifies the batch jobs that you want to run. Use this identifier to run ad hoc batch jobs.
      */
@@ -441,6 +453,7 @@ declare namespace M2 {
     scriptBatchJobIdentifier?: ScriptBatchJobIdentifier;
   }
   export type BatchJobParametersMap = {[key: string]: BatchParamValue};
+  export type BatchJobStepList = JobStep[];
   export type BatchJobType = "VSE"|"JES2"|"JES3"|string;
   export type BatchParamKey = string;
   export type BatchParamValue = string;
@@ -1127,6 +1140,10 @@ declare namespace M2 {
      * The name of this batch job.
      */
     jobName?: String100;
+    /**
+     * The restart steps information for the most recent restart operation.
+     */
+    jobStepRestartMarker?: JobStepRestartMarker;
     /**
      * The type of job.
      */
@@ -1385,6 +1402,50 @@ declare namespace M2 {
      */
     scriptName?: String;
   }
+  export interface JobStep {
+    /**
+     * The name of a procedure step.
+     */
+    procStepName?: String;
+    /**
+     * The number of a procedure step.
+     */
+    procStepNumber?: Integer;
+    /**
+     * The condition code of a step.
+     */
+    stepCondCode?: String;
+    /**
+     * The name of a step.
+     */
+    stepName?: String;
+    /**
+     * The number of a step.
+     */
+    stepNumber?: Integer;
+    /**
+     * Specifies if a step can be restarted or not.
+     */
+    stepRestartable?: Boolean;
+  }
+  export interface JobStepRestartMarker {
+    /**
+     * The procedure step name that a job was restarted from.
+     */
+    fromProcStep?: String;
+    /**
+     * The step name that a batch job restart was from.
+     */
+    fromStep: String;
+    /**
+     * The procedure step name that a batch job was restarted to.
+     */
+    toProcStep?: String;
+    /**
+     * The step name that a job was restarted to.
+     */
+    toStep?: String;
+  }
   export interface ListApplicationVersionsRequest {
     /**
      * The unique identifier of the application.
@@ -1509,6 +1570,22 @@ declare namespace M2 {
      */
     nextToken?: NextToken;
   }
+  export interface ListBatchJobRestartPointsRequest {
+    /**
+     * The unique identifier of the application.
+     */
+    applicationId: Identifier;
+    /**
+     * The unique identifier of each batch job execution.
+     */
+    executionId: Identifier;
+  }
+  export interface ListBatchJobRestartPointsResponse {
+    /**
+     * Returns all the batch job steps and related information for a batch job that previously ran.
+     */
+    batchJobSteps?: BatchJobStepList;
+  }
   export interface ListDataSetImportHistoryRequest {
     /**
      * The unique identifier of the application.
@@ -1757,6 +1834,16 @@ declare namespace M2 {
      */
     min: Integer;
   }
+  export interface RestartBatchJobIdentifier {
+    /**
+     * The executionId from the StartBatchJob response when the job ran for the first time.
+     */
+    executionId: Identifier;
+    /**
+     * The restart step information for the most recent restart operation.
+     */
+    jobStepRestartMarker: JobStepRestartMarker;
+  }
   export interface S3BatchJobIdentifier {
     /**
      * The Amazon S3 bucket that contains the batch job definitions.