aws-sdk 2.1433.0 → 2.1434.0

package/clients/connect.d.ts

@@ -99,6 +99,14 @@ declare class Connect extends Service {
    * This API is in preview release for Amazon Connect and is subject to change. Associates a security key to the instance.
    */
   associateSecurityKey(callback?: (err: AWSError, data: Connect.Types.AssociateSecurityKeyResponse) => void): Request<Connect.Types.AssociateSecurityKeyResponse, AWSError>;
+  /**
+   * Associates an agent with a traffic distribution group.
+   */
+  associateTrafficDistributionGroupUser(params: Connect.Types.AssociateTrafficDistributionGroupUserRequest, callback?: (err: AWSError, data: Connect.Types.AssociateTrafficDistributionGroupUserResponse) => void): Request<Connect.Types.AssociateTrafficDistributionGroupUserResponse, AWSError>;
+  /**
+   * Associates an agent with a traffic distribution group.
+   */
+  associateTrafficDistributionGroupUser(callback?: (err: AWSError, data: Connect.Types.AssociateTrafficDistributionGroupUserResponse) => void): Request<Connect.Types.AssociateTrafficDistributionGroupUserResponse, AWSError>;
   /**
    * Claims an available phone number to your Amazon Connect instance or traffic distribution group. You can call this API only in the same Amazon Web Services Region where the Amazon Connect instance or traffic distribution group was created. For more information about how to use this operation, see Claim a phone number in your country and Claim phone numbers to traffic distribution groups in the Amazon Connect Administrator Guide.   You can call the SearchAvailablePhoneNumbers API for available phone numbers that you can claim. Call the DescribePhoneNumber API to verify the status of a previous ClaimPhoneNumber operation.  If you plan to claim and release numbers frequently during a 30 day period, contact us for a service quota exception. Otherwise, it is possible you will be blocked from claiming and releasing any more numbers until 30 days past the oldest number released has expired. By default you can claim and release up to 200% of your maximum number of active phone numbers during any 30 day period. If you claim and release phone numbers using the UI or API during a rolling 30 day cycle that exceeds 200% of your phone number service level quota, you will be blocked from claiming any more numbers until 30 days past the oldest number released has expired.  For example, if you already have 99 claimed numbers and a service level quota of 99 phone numbers, and in any 30 day period you release 99, claim 99, and then release 99, you will have exceeded the 200% limit. At that point you are blocked from claiming any more numbers until you open an Amazon Web Services support ticket.
    */
@@ -675,6 +683,14 @@ declare class Connect extends Service {
    * This API is in preview release for Amazon Connect and is subject to change. Deletes the specified security key.
    */
   disassociateSecurityKey(callback?: (err: AWSError, data: {}) => void): Request<{}, AWSError>;
+  /**
+   * Disassociates an agent from a traffic distribution group.
+   */
+  disassociateTrafficDistributionGroupUser(params: Connect.Types.DisassociateTrafficDistributionGroupUserRequest, callback?: (err: AWSError, data: Connect.Types.DisassociateTrafficDistributionGroupUserResponse) => void): Request<Connect.Types.DisassociateTrafficDistributionGroupUserResponse, AWSError>;
+  /**
+   * Disassociates an agent from a traffic distribution group.
+   */
+  disassociateTrafficDistributionGroupUser(callback?: (err: AWSError, data: Connect.Types.DisassociateTrafficDistributionGroupUserResponse) => void): Request<Connect.Types.DisassociateTrafficDistributionGroupUserResponse, AWSError>;
   /**
    * Dismisses contacts from an agent’s CCP and returns the agent to an available state, which allows the agent to receive a new routed contact. Contacts can only be dismissed if they are in a MISSED, ERROR, ENDED, or REJECTED state in the Agent Event Stream.
    */
@@ -900,11 +916,11 @@ declare class Connect extends Service {
    */
   listPhoneNumbers(callback?: (err: AWSError, data: Connect.Types.ListPhoneNumbersResponse) => void): Request<Connect.Types.ListPhoneNumbersResponse, AWSError>;
   /**
-   * Lists phone numbers claimed to your Amazon Connect instance or traffic distribution group. If the provided TargetArn is a traffic distribution group, you can call this API in both Amazon Web Services Regions associated with traffic distribution group. For more information about phone numbers, see Set Up Phone Numbers for Your Contact Center in the Amazon Connect Administrator Guide.
+   * Lists phone numbers claimed to your Amazon Connect instance or traffic distribution group. If the provided TargetArn is a traffic distribution group, you can call this API in both Amazon Web Services Regions associated with traffic distribution group. For more information about phone numbers, see Set Up Phone Numbers for Your Contact Center in the Amazon Connect Administrator Guide.    When given an instance ARN, ListPhoneNumbersV2 returns only the phone numbers claimed to the instance.   When given a traffic distribution group ARN ListPhoneNumbersV2 returns only the phone numbers claimed to the traffic distribution group.   
    */
   listPhoneNumbersV2(params: Connect.Types.ListPhoneNumbersV2Request, callback?: (err: AWSError, data: Connect.Types.ListPhoneNumbersV2Response) => void): Request<Connect.Types.ListPhoneNumbersV2Response, AWSError>;
   /**
-   * Lists phone numbers claimed to your Amazon Connect instance or traffic distribution group. If the provided TargetArn is a traffic distribution group, you can call this API in both Amazon Web Services Regions associated with traffic distribution group. For more information about phone numbers, see Set Up Phone Numbers for Your Contact Center in the Amazon Connect Administrator Guide.
+   * Lists phone numbers claimed to your Amazon Connect instance or traffic distribution group. If the provided TargetArn is a traffic distribution group, you can call this API in both Amazon Web Services Regions associated with traffic distribution group. For more information about phone numbers, see Set Up Phone Numbers for Your Contact Center in the Amazon Connect Administrator Guide.    When given an instance ARN, ListPhoneNumbersV2 returns only the phone numbers claimed to the instance.   When given a traffic distribution group ARN ListPhoneNumbersV2 returns only the phone numbers claimed to the traffic distribution group.   
    */
   listPhoneNumbersV2(callback?: (err: AWSError, data: Connect.Types.ListPhoneNumbersV2Response) => void): Request<Connect.Types.ListPhoneNumbersV2Response, AWSError>;
   /**
@@ -1003,6 +1019,14 @@ declare class Connect extends Service {
    * Lists task templates for the specified Amazon Connect instance.
    */
   listTaskTemplates(callback?: (err: AWSError, data: Connect.Types.ListTaskTemplatesResponse) => void): Request<Connect.Types.ListTaskTemplatesResponse, AWSError>;
+  /**
+   * Lists traffic distribution group users.
+   */
+  listTrafficDistributionGroupUsers(params: Connect.Types.ListTrafficDistributionGroupUsersRequest, callback?: (err: AWSError, data: Connect.Types.ListTrafficDistributionGroupUsersResponse) => void): Request<Connect.Types.ListTrafficDistributionGroupUsersResponse, AWSError>;
+  /**
+   * Lists traffic distribution group users.
+   */
+  listTrafficDistributionGroupUsers(callback?: (err: AWSError, data: Connect.Types.ListTrafficDistributionGroupUsersResponse) => void): Request<Connect.Types.ListTrafficDistributionGroupUsersResponse, AWSError>;
   /**
    * Lists traffic distribution groups.
    */
@@ -1524,11 +1548,11 @@ declare class Connect extends Service {
    */
   updateTaskTemplate(callback?: (err: AWSError, data: Connect.Types.UpdateTaskTemplateResponse) => void): Request<Connect.Types.UpdateTaskTemplateResponse, AWSError>;
   /**
-   * Updates the traffic distribution for a given traffic distribution group.  For more information about updating a traffic distribution group, see Update telephony traffic distribution across Amazon Web Services Regions  in the Amazon Connect Administrator Guide. 
+   * Updates the traffic distribution for a given traffic distribution group.   You can change the SignInConfig only for a default TrafficDistributionGroup. If you call UpdateTrafficDistribution with a modified SignInConfig and a non-default TrafficDistributionGroup, an InvalidRequestException is returned.  For more information about updating a traffic distribution group, see Update telephony traffic distribution across Amazon Web Services Regions  in the Amazon Connect Administrator Guide. 
    */
   updateTrafficDistribution(params: Connect.Types.UpdateTrafficDistributionRequest, callback?: (err: AWSError, data: Connect.Types.UpdateTrafficDistributionResponse) => void): Request<Connect.Types.UpdateTrafficDistributionResponse, AWSError>;
   /**
-   * Updates the traffic distribution for a given traffic distribution group.  For more information about updating a traffic distribution group, see Update telephony traffic distribution across Amazon Web Services Regions  in the Amazon Connect Administrator Guide. 
+   * Updates the traffic distribution for a given traffic distribution group.   You can change the SignInConfig only for a default TrafficDistributionGroup. If you call UpdateTrafficDistribution with a modified SignInConfig and a non-default TrafficDistributionGroup, an InvalidRequestException is returned.  For more information about updating a traffic distribution group, see Update telephony traffic distribution across Amazon Web Services Regions  in the Amazon Connect Administrator Guide. 
    */
   updateTrafficDistribution(callback?: (err: AWSError, data: Connect.Types.UpdateTrafficDistributionResponse) => void): Request<Connect.Types.UpdateTrafficDistributionResponse, AWSError>;
   /**
@@ -1628,6 +1652,12 @@ declare namespace Connect {
   }
   export type AfterContactWorkTimeLimit = number;
   export type AgentAvailabilityTimer = "TIME_SINCE_LAST_ACTIVITY"|"TIME_SINCE_LAST_INBOUND"|string;
+  export interface AgentConfig {
+    /**
+     * Information about traffic distributions.
+     */
+    Distributions: DistributionList;
+  }
   export interface AgentContactReference {
     /**
      * The identifier of the contact in this instance of Amazon Connect. 
@@ -1896,6 +1926,22 @@ declare namespace Connect {
      */
     AssociationId?: AssociationId;
   }
+  export interface AssociateTrafficDistributionGroupUserRequest {
+    /**
+     * The identifier of the traffic distribution group. This can be the ID or the ARN if the API is being called in the Region where the traffic distribution group was created. The ARN must be provided if the call is from the replicated Region.
+     */
+    TrafficDistributionGroupId: TrafficDistributionGroupIdOrArn;
+    /**
+     * The identifier of the user account. This can be the ID or the ARN of the user. 
+     */
+    UserId: UserId;
+    /**
+     * The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.
+     */
+    InstanceId: InstanceId;
+  }
+  export interface AssociateTrafficDistributionGroupUserResponse {
+  }
   export type AssociationId = string;
   export interface AttachmentReference {
     /**
@@ -2688,7 +2734,7 @@ declare namespace Connect {
      */
     Tags?: TagMap;
     /**
-     * Whether agents with this routing profile will have their routing order calculated based on time since their last inbound contact or longest idle time. 
+     * Whether agents with this routing profile will have their routing order calculated based on longest idle time or time since their last inbound contact. 
      */
     AgentAvailabilityTimer?: AgentAvailabilityTimer;
   }
@@ -3822,6 +3868,22 @@ declare namespace Connect {
      */
     AssociationId: AssociationId;
   }
+  export interface DisassociateTrafficDistributionGroupUserRequest {
+    /**
+     * The identifier of the traffic distribution group. This can be the ID or the ARN if the API is being called in the Region where the traffic distribution group was created. The ARN must be provided if the call is from the replicated Region.
+     */
+    TrafficDistributionGroupId: TrafficDistributionGroupIdOrArn;
+    /**
+     * The identifier for the user. This can be the ID or the ARN of the user.
+     */
+    UserId: UserId;
+    /**
+     * The identifier of the Amazon Connect instance. You can find the instance ID in the Amazon Resource Name (ARN) of the instance.
+     */
+    InstanceId: InstanceId;
+  }
+  export interface DisassociateTrafficDistributionGroupUserResponse {
+  }
   export interface DismissUserContactRequest {
     /**
      * The identifier of the user account.
@@ -4546,7 +4608,7 @@ declare namespace Connect {
      */
     UserArn?: ARN;
     /**
-     * The identifier for the user.
+     * The identifier for the user. This can be the ID or the ARN of the user.
      */
     UserId?: AgentResourceId;
   }
@@ -4741,6 +4803,14 @@ declare namespace Connect {
      * The Amazon Resource Name (ARN) of the traffic distribution group.
      */
     Arn?: TrafficDistributionGroupArn;
+    /**
+     * The distribution of allowing signing in to the instance and its replica(s).
+     */
+    SignInConfig?: SignInConfig;
+    /**
+     * The distribution of agents between the instance and its replica(s).
+     */
+    AgentConfig?: AgentConfig;
   }
   export type Grouping = "QUEUE"|"CHANNEL"|"ROUTING_PROFILE"|string;
   export type GroupingV2 = string;
@@ -6136,6 +6206,30 @@ declare namespace Connect {
      */
     NextToken?: NextToken;
   }
+  export interface ListTrafficDistributionGroupUsersRequest {
+    /**
+     * The identifier of the traffic distribution group. This can be the ID or the ARN if the API is being called in the Region where the traffic distribution group was created. The ARN must be provided if the call is from the replicated Region.
+     */
+    TrafficDistributionGroupId: TrafficDistributionGroupIdOrArn;
+    /**
+     * The maximum number of results to return per page.
+     */
+    MaxResults?: MaxResult10;
+    /**
+     * The token for the next set of results. Use the value returned in the previous response in the next request to retrieve the next set of results.
+     */
+    NextToken?: NextToken;
+  }
+  export interface ListTrafficDistributionGroupUsersResponse {
+    /**
+     * If there are additional results, this is the token for the next set of results.
+     */
+    NextToken?: NextToken;
+    /**
+     * A list of traffic distribution group users.
+     */
+    TrafficDistributionGroupUserSummaryList?: TrafficDistributionGroupUserSummaryList;
+  }
   export interface ListTrafficDistributionGroupsRequest {
     /**
      * The maximum number of results to return per page.
@@ -7690,6 +7784,23 @@ declare namespace Connect {
      */
     Recipient: NotificationRecipientType;
   }
+  export interface SignInConfig {
+    /**
+     * Information about traffic distributions.
+     */
+    Distributions: SignInDistributionList;
+  }
+  export interface SignInDistribution {
+    /**
+     * The Amazon Web Services Region of the sign in distribution.
+     */
+    Region: AwsRegion;
+    /**
+     * Whether sign in distribution is enabled.
+     */
+    Enabled: Boolean;
+  }
+  export type SignInDistributionList = SignInDistribution[];
   export type SingleSelectOptions = TaskTemplateSingleSelectOption[];
   export interface SingleSelectQuestionRuleCategoryAutomation {
     /**
@@ -8303,6 +8414,10 @@ declare namespace Connect {
      * The tags used to organize, track, or control access for this resource. For example, { "tags": {"key1":"value1", "key2":"value2"} }.
      */
     Tags?: TagMap;
+    /**
+     * Whether this is the default traffic distribution group created during instance replication. The default traffic distribution group cannot be deleted by the DeleteTrafficDistributionGroup API. The default traffic distribution group is deleted as part of the process for deleting a replica.  You can change the SignInConfig only for a default TrafficDistributionGroup. If you call UpdateTrafficDistribution with a modified SignInConfig and a non-default TrafficDistributionGroup, an InvalidRequestException is returned. 
+     */
+    IsDefault?: Boolean;
   }
   export type TrafficDistributionGroupArn = string;
   export type TrafficDistributionGroupId = string;
@@ -8329,8 +8444,19 @@ declare namespace Connect {
      * The status of the traffic distribution group.     CREATION_IN_PROGRESS means the previous CreateTrafficDistributionGroup operation is still in progress and has not yet completed.    ACTIVE means the previous CreateTrafficDistributionGroup operation has succeeded.    CREATION_FAILED indicates that the previous CreateTrafficDistributionGroup operation has failed.    PENDING_DELETION means the previous DeleteTrafficDistributionGroup operation is still in progress and has not yet completed.    DELETION_FAILED means the previous DeleteTrafficDistributionGroup operation has failed.    UPDATE_IN_PROGRESS means the previous UpdateTrafficDistributionGroup operation is still in progress and has not yet completed.  
      */
     Status?: TrafficDistributionGroupStatus;
+    /**
+     * Whether this is the default traffic distribution group created during instance replication. The default traffic distribution group cannot be deleted by the DeleteTrafficDistributionGroup API. The default traffic distribution group is deleted as part of the process for deleting a replica.
+     */
+    IsDefault?: Boolean;
   }
   export type TrafficDistributionGroupSummaryList = TrafficDistributionGroupSummary[];
+  export interface TrafficDistributionGroupUserSummary {
+    /**
+     * The identifier for the user. This can be the ID or the ARN of the user.
+     */
+    UserId?: UserId;
+  }
+  export type TrafficDistributionGroupUserSummaryList = TrafficDistributionGroupUserSummary[];
   export type TrafficType = "GENERAL"|"CAMPAIGN"|string;
   export interface TransferContactRequest {
     /**
@@ -8346,7 +8472,7 @@ declare namespace Connect {
      */
     QueueId?: QueueId;
     /**
-     * The identifier for the user.
+     * The identifier for the user. This can be the ID or the ARN of the user.
      */
     UserId?: AgentResourceId;
     /**
@@ -9111,6 +9237,14 @@ declare namespace Connect {
      * The distribution of traffic between the instance and its replica(s).
      */
     TelephonyConfig?: TelephonyConfig;
+    /**
+     * The distribution of allowing signing in to the instance and its replica(s).
+     */
+    SignInConfig?: SignInConfig;
+    /**
+     * The distribution of agents between the instance and its replica(s).
+     */
+    AgentConfig?: AgentConfig;
   }
   export interface UpdateTrafficDistributionResponse {
   }

package/clients/elbv2.d.ts

@@ -93,11 +93,11 @@ declare class ELBv2 extends Service {
    */
   deleteTargetGroup(callback?: (err: AWSError, data: ELBv2.Types.DeleteTargetGroupOutput) => void): Request<ELBv2.Types.DeleteTargetGroupOutput, AWSError>;
   /**
-   * Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer.
+   * Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer. Note: If the specified target does not exist, the action returns successfully.
    */
   deregisterTargets(params: ELBv2.Types.DeregisterTargetsInput, callback?: (err: AWSError, data: ELBv2.Types.DeregisterTargetsOutput) => void): Request<ELBv2.Types.DeregisterTargetsOutput, AWSError>;
   /**
-   * Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer.
+   * Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer. Note: If the specified target does not exist, the action returns successfully.
    */
   deregisterTargets(callback?: (err: AWSError, data: ELBv2.Types.DeregisterTargetsOutput) => void): Request<ELBv2.Types.DeregisterTargetsOutput, AWSError>;
   /**
@@ -269,11 +269,11 @@ declare class ELBv2 extends Service {
    */
   setRulePriorities(callback?: (err: AWSError, data: ELBv2.Types.SetRulePrioritiesOutput) => void): Request<ELBv2.Types.SetRulePrioritiesOutput, AWSError>;
   /**
-   * Associates the specified security groups with the specified Application Load Balancer. The specified security groups override the previously associated security groups. You can't specify a security group for a Network Load Balancer or Gateway Load Balancer.
+   * Associates the specified security groups with the specified Application Load Balancer or Network Load Balancer. The specified security groups override the previously associated security groups. You can't perform this operation on a Network Load Balancer unless you specified a security group for the load balancer when you created it. You can't associate a security group with a Gateway Load Balancer.
    */
   setSecurityGroups(params: ELBv2.Types.SetSecurityGroupsInput, callback?: (err: AWSError, data: ELBv2.Types.SetSecurityGroupsOutput) => void): Request<ELBv2.Types.SetSecurityGroupsOutput, AWSError>;
   /**
-   * Associates the specified security groups with the specified Application Load Balancer. The specified security groups override the previously associated security groups. You can't specify a security group for a Network Load Balancer or Gateway Load Balancer.
+   * Associates the specified security groups with the specified Application Load Balancer or Network Load Balancer. The specified security groups override the previously associated security groups. You can't perform this operation on a Network Load Balancer unless you specified a security group for the load balancer when you created it. You can't associate a security group with a Gateway Load Balancer.
    */
   setSecurityGroups(callback?: (err: AWSError, data: ELBv2.Types.SetSecurityGroupsOutput) => void): Request<ELBv2.Types.SetSecurityGroupsOutput, AWSError>;
   /**
@@ -602,7 +602,7 @@ declare namespace ELBv2 {
      */
     SubnetMappings?: SubnetMappings;
     /**
-     * [Application Load Balancers] The IDs of the security groups for the load balancer.
+     * [Application Load Balancers and Network Load Balancers] The IDs of the security groups for the load balancer.
      */
     SecurityGroups?: SecurityGroups;
     /**
@@ -1025,6 +1025,8 @@ declare namespace ELBv2 {
     TargetHealthDescriptions?: TargetHealthDescriptions;
   }
   export type Description = string;
+  export type EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic = string;
+  export type EnforceSecurityGroupInboundRulesOnPrivateLinkTrafficEnum = "on"|"off"|string;
   export interface FixedResponseActionConfig {
     /**
      * The message.
@@ -1188,6 +1190,10 @@ declare namespace ELBv2 {
      * [Application Load Balancers on Outposts] The ID of the customer-owned address pool.
      */
     CustomerOwnedIpv4Pool?: CustomerOwnedIpv4Pool;
+    /**
+     * Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through Amazon Web Services PrivateLink.
+     */
+    EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic?: EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic;
   }
   export interface LoadBalancerAddress {
     /**
@@ -1599,12 +1605,20 @@ declare namespace ELBv2 {
      * The IDs of the security groups.
      */
     SecurityGroups: SecurityGroups;
+    /**
+     * Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through Amazon Web Services PrivateLink. The default is on.
+     */
+    EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic?: EnforceSecurityGroupInboundRulesOnPrivateLinkTrafficEnum;
   }
   export interface SetSecurityGroupsOutput {
     /**
      * The IDs of the security groups associated with the load balancer.
      */
     SecurityGroupIds?: SecurityGroups;
+    /**
+     * Indicates whether to evaluate inbound security group rules for traffic sent to a Network Load Balancer through Amazon Web Services PrivateLink.
+     */
+    EnforceSecurityGroupInboundRulesOnPrivateLinkTraffic?: EnforceSecurityGroupInboundRulesOnPrivateLinkTrafficEnum;
   }
   export interface SetSubnetsInput {
     /**
@@ -1620,7 +1634,7 @@ declare namespace ELBv2 {
      */
     SubnetMappings?: SubnetMappings;
     /**
-     * [Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses). You can’t specify dualstack for a load balancer with a UDP or TCP_UDP listener. .
+     * [Network Load Balancers] The type of IP addresses used by the subnets for your load balancer. The possible values are ipv4 (for IPv4 addresses) and dualstack (for IPv4 and IPv6 addresses). You can’t specify dualstack for a load balancer with a UDP or TCP_UDP listener.
      */
     IpAddressType?: IpAddressType;
   }
@@ -1718,7 +1732,7 @@ declare namespace ELBv2 {
      */
     Id: TargetId;
     /**
-     * The port on which the target is listening. If the target group protocol is GENEVE, the supported port is 6081. If the target type is alb, the targeted Application Load Balancer must have at least one listener whose port matches the target group port. Not used if the target is a Lambda function.
+     * The port on which the target is listening. If the target group protocol is GENEVE, the supported port is 6081. If the target type is alb, the targeted Application Load Balancer must have at least one listener whose port matches the target group port. This parameter is not used if the target is a Lambda function.
      */
     Port?: Port;
     /**
@@ -1741,7 +1755,7 @@ declare namespace ELBv2 {
      */
     Protocol?: ProtocolEnum;
     /**
-     * The port on which the targets are listening. Not used if the target is a Lambda function.
+     * The port on which the targets are listening. This parameter is not used if the target is a Lambda function.
      */
     Port?: Port;
     /**
@@ -1785,7 +1799,7 @@ declare namespace ELBv2 {
      */
     Matcher?: Matcher;
     /**
-     * The Amazon Resource Names (ARN) of the load balancers that route traffic to this target group.
+     * The Amazon Resource Name (ARN) of the load balancer that routes traffic to this target group. You can use each target group with only one load balancer.
      */
     LoadBalancerArns?: LoadBalancerArns;
     /**

package/clients/omics.d.ts

@@ -2271,6 +2271,10 @@ declare namespace Omics {
      *  The number of Graphics Processing Units (GPU) specified in the task. 
      */
     gpus?: GetRunTaskResponseGpusInteger;
+    /**
+     *  The instance type for a task. 
+     */
+    instanceType?: TaskInstanceType;
   }
   export type GetRunTaskResponseCpusInteger = number;
   export type GetRunTaskResponseGpusInteger = number;
@@ -2686,7 +2690,7 @@ declare namespace Omics {
      */
     ids?: ListAnnotationImportJobsRequestIdsList;
     /**
-     * Specify the pagination token from a previous request to retrieve the next page of results.
+     * Specifies the pagination token from a previous request to retrieve the next page of results.
      */
     nextToken?: ListAnnotationImportJobsRequestNextTokenString;
     /**
@@ -2703,7 +2707,7 @@ declare namespace Omics {
      */
     annotationImportJobs?: AnnotationImportJobItems;
     /**
-     * A pagination token that's included if more results are available.
+     * Specifies the pagination token from a previous request to retrieve the next page of results.
      */
     nextToken?: String;
   }
@@ -4231,6 +4235,7 @@ declare namespace Omics {
   }
   export type TagValue = string;
   export type TaskId = string;
+  export type TaskInstanceType = string;
   export type TaskList = TaskListItem[];
   export interface TaskListItem {
     /**
@@ -4269,6 +4274,10 @@ declare namespace Omics {
      *  The number of Graphics Processing Units (GPU) specified for the task. 
      */
     gpus?: TaskListItemGpusInteger;
+    /**
+     *  The instance type for a task. 
+     */
+    instanceType?: TaskInstanceType;
   }
   export type TaskListItemCpusInteger = number;
   export type TaskListItemGpusInteger = number;

package/clients/transfer.d.ts

@@ -29,11 +29,11 @@ declare class Transfer extends Service {
    */
   createAgreement(callback?: (err: AWSError, data: Transfer.Types.CreateAgreementResponse) => void): Request<Transfer.Types.CreateAgreementResponse, AWSError>;
   /**
-   * Creates the connector, which captures the parameters for an outbound connection for the AS2 or SFTP protocol. The connector is required for sending files to an externally hosted AS2 or SFTP server. For more details about AS2 connectors, see Create AS2 connectors.  You must specify exactly one configuration object: either for AS2 (As2Config) or SFTP (SftpConfig). 
+   * Creates the connector, which captures the parameters for a connection for the AS2 or SFTP protocol. For AS2, the connector is required for sending files to an externally hosted AS2 server. For SFTP, the connector is required when sending files to an SFTP server or receiving files from an SFTP server. For more details about connectors, see Create AS2 connectors and Create SFTP connectors.  You must specify exactly one configuration object: either for AS2 (As2Config) or SFTP (SftpConfig). 
    */
   createConnector(params: Transfer.Types.CreateConnectorRequest, callback?: (err: AWSError, data: Transfer.Types.CreateConnectorResponse) => void): Request<Transfer.Types.CreateConnectorResponse, AWSError>;
   /**
-   * Creates the connector, which captures the parameters for an outbound connection for the AS2 or SFTP protocol. The connector is required for sending files to an externally hosted AS2 or SFTP server. For more details about AS2 connectors, see Create AS2 connectors.  You must specify exactly one configuration object: either for AS2 (As2Config) or SFTP (SftpConfig). 
+   * Creates the connector, which captures the parameters for a connection for the AS2 or SFTP protocol. For AS2, the connector is required for sending files to an externally hosted AS2 server. For SFTP, the connector is required when sending files to an SFTP server or receiving files from an SFTP server. For more details about connectors, see Create AS2 connectors and Create SFTP connectors.  You must specify exactly one configuration object: either for AS2 (As2Config) or SFTP (SftpConfig). 
    */
   createConnector(callback?: (err: AWSError, data: Transfer.Types.CreateConnectorResponse) => void): Request<Transfer.Types.CreateConnectorResponse, AWSError>;
   /**
@@ -365,11 +365,11 @@ declare class Transfer extends Service {
    */
   sendWorkflowStepState(callback?: (err: AWSError, data: Transfer.Types.SendWorkflowStepStateResponse) => void): Request<Transfer.Types.SendWorkflowStepStateResponse, AWSError>;
   /**
-   * Begins a file transfer between local Amazon Web Services storage and a remote AS2 or SFTP server.   For an AS2 connector, you specify the ConnectorId and one or more SendFilePaths to identify the files you want to transfer.   For an SFTP connector, the file transfer can be either outbound or inbound. In both cases, you specify the ConnectorId. Depending on the direction of the transfer, you also specify the following items:   If you are transferring file from a partner's SFTP server to a Transfer Family server, you specify one or more RetreiveFilePaths to identify the files you want to transfer, and a LocalDirectoryPath to specify the destination folder.   If you are transferring file to a partner's SFTP server from Amazon Web Services storage, you specify one or more SendFilePaths to identify the files you want to transfer, and a RemoteDirectoryPath to specify the destination folder.    
+   * Begins a file transfer between local Amazon Web Services storage and a remote AS2 or SFTP server.   For an AS2 connector, you specify the ConnectorId and one or more SendFilePaths to identify the files you want to transfer.   For an SFTP connector, the file transfer can be either outbound or inbound. In both cases, you specify the ConnectorId. Depending on the direction of the transfer, you also specify the following items:   If you are transferring file from a partner's SFTP server to Amazon Web Services storage, you specify one or more RetreiveFilePaths to identify the files you want to transfer, and a LocalDirectoryPath to specify the destination folder.   If you are transferring file to a partner's SFTP server from Amazon Web Services storage, you specify one or more SendFilePaths to identify the files you want to transfer, and a RemoteDirectoryPath to specify the destination folder.    
    */
   startFileTransfer(params: Transfer.Types.StartFileTransferRequest, callback?: (err: AWSError, data: Transfer.Types.StartFileTransferResponse) => void): Request<Transfer.Types.StartFileTransferResponse, AWSError>;
   /**
-   * Begins a file transfer between local Amazon Web Services storage and a remote AS2 or SFTP server.   For an AS2 connector, you specify the ConnectorId and one or more SendFilePaths to identify the files you want to transfer.   For an SFTP connector, the file transfer can be either outbound or inbound. In both cases, you specify the ConnectorId. Depending on the direction of the transfer, you also specify the following items:   If you are transferring file from a partner's SFTP server to a Transfer Family server, you specify one or more RetreiveFilePaths to identify the files you want to transfer, and a LocalDirectoryPath to specify the destination folder.   If you are transferring file to a partner's SFTP server from Amazon Web Services storage, you specify one or more SendFilePaths to identify the files you want to transfer, and a RemoteDirectoryPath to specify the destination folder.    
+   * Begins a file transfer between local Amazon Web Services storage and a remote AS2 or SFTP server.   For an AS2 connector, you specify the ConnectorId and one or more SendFilePaths to identify the files you want to transfer.   For an SFTP connector, the file transfer can be either outbound or inbound. In both cases, you specify the ConnectorId. Depending on the direction of the transfer, you also specify the following items:   If you are transferring file from a partner's SFTP server to Amazon Web Services storage, you specify one or more RetreiveFilePaths to identify the files you want to transfer, and a LocalDirectoryPath to specify the destination folder.   If you are transferring file to a partner's SFTP server from Amazon Web Services storage, you specify one or more SendFilePaths to identify the files you want to transfer, and a RemoteDirectoryPath to specify the destination folder.    
    */
   startFileTransfer(callback?: (err: AWSError, data: Transfer.Types.StartFileTransferResponse) => void): Request<Transfer.Types.StartFileTransferResponse, AWSError>;
   /**
@@ -643,7 +643,7 @@ declare namespace Transfer {
      */
     BaseDirectory: HomeDirectory;
     /**
-     * With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.
+     * Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.  For AS2 connectors  With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.  For SFTP connectors  Make sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.
      */
     AccessRole: Role;
     /**
@@ -671,7 +671,7 @@ declare namespace Transfer {
      */
     As2Config?: As2ConnectorConfig;
     /**
-     * With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.
+     * Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.  For AS2 connectors  With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.  For SFTP connectors  Make sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.
      */
     AccessRole: Role;
     /**
@@ -1228,7 +1228,7 @@ declare namespace Transfer {
      */
     BaseDirectory?: HomeDirectory;
     /**
-     * With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.
+     * Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.  For AS2 connectors  With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.  For SFTP connectors  Make sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.
      */
     AccessRole?: Role;
     /**
@@ -1312,7 +1312,7 @@ declare namespace Transfer {
      */
     As2Config?: As2ConnectorConfig;
     /**
-     * With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.
+     * Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.  For AS2 connectors  With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.  For SFTP connectors  Make sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.
      */
     AccessRole?: Role;
     /**
@@ -2551,7 +2551,7 @@ declare namespace Transfer {
      */
     ConnectorId: ConnectorId;
     /**
-     * One or more source paths for the Transfer Family server. Each string represents a source file path for one outbound file transfer. For example,  DOC-EXAMPLE-BUCKET/myfile.txt .
+     * One or more source paths for the Transfer Family server. Each string represents a source file path for one outbound file transfer. For example,  DOC-EXAMPLE-BUCKET/myfile.txt .  Replace  DOC-EXAMPLE-BUCKET with one of your actual buckets. 
      */
     SendFilePaths?: FilePaths;
     /**
@@ -2773,7 +2773,7 @@ declare namespace Transfer {
      */
     BaseDirectory?: HomeDirectory;
     /**
-     * With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.
+     * Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.  For AS2 connectors  With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.  For SFTP connectors  Make sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.
      */
     AccessRole?: Role;
   }
@@ -2821,7 +2821,7 @@ declare namespace Transfer {
      */
     As2Config?: As2ConnectorConfig;
     /**
-     * With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.
+     * Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.  For AS2 connectors  With AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer. If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.  For SFTP connectors  Make sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.
      */
     AccessRole?: Role;
     /**

package/dist/aws-sdk-core-react-native.js

@@ -83,7 +83,7 @@ return /******/ (function(modules) { // webpackBootstrap
 	  /**
 	   * @constant
 	   */
-	  VERSION: '2.1433.0',
+	  VERSION: '2.1434.0',
 
 	  /**
 	   * @api private