any2orca-profiles 0.0.0-stage → 0.1.0

package/data/profiles/snapmaker-u1-0.8-0.32std.json

@@ -0,0 +1,1775 @@
+{
+  "schema": 1,
+  "id": "snapmaker-u1-0.8-0.32std",
+  "displayName": "0.32mm Standard @Snapmaker U1 (0.8 nozzle)",
+  "printer": {
+    "id": "snapmaker-u1-0.8",
+    "printableArea": [
+      "0.5x1",
+      "270.5x1",
+      "270.5x271",
+      "0.5x271"
+    ],
+    "extruderClearanceRadius": 72.5,
+    "highFlowSupported": false,
+    "machineSettings": {
+      "name": "Snapmaker U1 (0.8 nozzle)",
+      "printer_technology": "FFF",
+      "deretraction_speed": [
+        "30",
+        "30",
+        "30",
+        "30"
+      ],
+      "extruder_colour": [
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F",
+        "#FCE94F"
+      ],
+      "extruder_offset": [
+        "0x0",
+        "0x0",
+        "0x0",
+        "0x0"
+      ],
+      "gcode_flavor": "klipper",
+      "silent_mode": "0",
+      "machine_max_acceleration_e": [
+        "5000",
+        "5000"
+      ],
+      "machine_max_acceleration_extruding": [
+        "20000",
+        "20000"
+      ],
+      "machine_max_acceleration_retracting": [
+        "5000",
+        "5000"
+      ],
+      "machine_max_acceleration_x": [
+        "20000",
+        "20000"
+      ],
+      "machine_max_acceleration_y": [
+        "20000",
+        "20000"
+      ],
+      "machine_max_acceleration_z": [
+        "500",
+        "200"
+      ],
+      "machine_max_speed_e": [
+        "30",
+        "25"
+      ],
+      "machine_max_speed_x": [
+        "500",
+        "200"
+      ],
+      "machine_max_speed_y": [
+        "500",
+        "200"
+      ],
+      "machine_max_speed_z": [
+        "20",
+        "12"
+      ],
+      "machine_max_jerk_e": [
+        "2.5",
+        "2.5"
+      ],
+      "machine_max_jerk_x": [
+        "9",
+        "9"
+      ],
+      "machine_max_jerk_y": [
+        "9",
+        "9"
+      ],
+      "machine_max_jerk_z": [
+        "3",
+        "0.4"
+      ],
+      "machine_min_extruding_rate": [
+        "0",
+        "0"
+      ],
+      "machine_min_travel_rate": [
+        "0",
+        "0"
+      ],
+      "max_layer_height": [
+        "0.56",
+        "0.56",
+        "0.56",
+        "0.56"
+      ],
+      "min_layer_height": [
+        "0.16",
+        "0.16",
+        "0.16",
+        "0.16"
+      ],
+      "printable_height": "270.05",
+      "extruder_clearance_radius": "72.5",
+      "extruder_clearance_height_to_rod": "27.5",
+      "extruder_clearance_height_to_lid": "140",
+      "nozzle_diameter": [
+        "0.8",
+        "0.8",
+        "0.8",
+        "0.8"
+      ],
+      "printer_settings_id": "MyToolChanger 0.4 nozzle - Copy",
+      "printer_variant": "0.8",
+      "retraction_minimum_travel": [
+        "1",
+        "1",
+        "1",
+        "1"
+      ],
+      "retract_before_wipe": [
+        "0%",
+        "0%",
+        "0%",
+        "0%"
+      ],
+      "retract_when_changing_layer": [
+        "1",
+        "1",
+        "1",
+        "1"
+      ],
+      "retraction_length": [
+        "1.5",
+        "1.5",
+        "1.5",
+        "1.5"
+      ],
+      "retract_length_toolchange": [
+        "10",
+        "10",
+        "10",
+        "10"
+      ],
+      "z_hop": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "0.4"
+      ],
+      "retract_restart_extra": [
+        "0",
+        "0",
+        "0",
+        "0"
+      ],
+      "retract_restart_extra_toolchange": [
+        "0",
+        "0",
+        "0",
+        "0"
+      ],
+      "retraction_speed": [
+        "30",
+        "30",
+        "30",
+        "30"
+      ],
+      "single_extruder_multi_material": "0",
+      "change_filament_gcode": ";===== date: 20251213 =====================\n\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
+      "wipe": [
+        "1",
+        "1",
+        "1",
+        "1"
+      ],
+      "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+      "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                     \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                  \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11                                                                                                                                                                                                                                                                                                                                                                                                                                                                         \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+      "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
+      "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
+      "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
+      "machine_pause_gcode": "M600",
+      "machine_max_acceleration_travel": [
+        "20000",
+        "20000"
+      ],
+      "z_hop_types": [
+        "Auto Lift",
+        "Auto Lift",
+        "Auto Lift",
+        "Auto Lift"
+      ],
+      "default_filament_profile": [
+        "Snapmaker PLA"
+      ],
+      "bed_exclude_area": [
+        "0x0"
+      ],
+      "scan_first_layer": "0",
+      "nozzle_type": "hardened_steel",
+      "auxiliary_fan": "1",
+      "bed_model": "Snapmaker U1_bed.stl",
+      "bed_texture": "Snapmaker U1_bed.svg",
+      "long_retractions_when_cut": [
+        "0",
+        "0",
+        "0",
+        "0"
+      ],
+      "retract_lift_above": [
+        "0",
+        "0",
+        "0",
+        "0"
+      ],
+      "retract_lift_below": [
+        "269",
+        "269",
+        "269",
+        "269"
+      ],
+      "retract_lift_enforce": [
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces",
+        "All Surfaces"
+      ],
+      "retraction_distances_when_cut": [
+        "18",
+        "18",
+        "18",
+        "18"
+      ],
+      "travel_slope": [
+        "3",
+        "3",
+        "3",
+        "3"
+      ],
+      "wipe_distance": [
+        "2",
+        "2",
+        "2",
+        "2"
+      ],
+      "purge_in_prime_tower": "0",
+      "default_bed_type": "Textured PEI Plate",
+      "printer_model": "Snapmaker U1",
+      "host_type": "octoprint",
+      "is_custom_defined": "0",
+      "machine_tool_change_time": "5",
+      "printable_area": [
+        "0.5x1",
+        "270.5x1",
+        "270.5x271",
+        "0.5x271"
+      ],
+      "thumbnails": "48x48/PNG, 300x300/PNG",
+      "enable_filament_ramming": "0",
+      "machine_load_filament_time": "0",
+      "machine_unload_filament_time": "0",
+      "z_hop_when_prime": [
+        "0",
+        "0",
+        "0",
+        "0"
+      ],
+      "ramming_pressure_advance_value": "0.02",
+      "tool_change_temprature_wait": "0",
+      "printer_notes": "",
+      "nozzle_volume": "143",
+      "support_multi_bed_types": "0"
+    }
+  },
+  "baselineProjectSettings": {
+    "accel_to_decel_enable": [
+      "1"
+    ],
+    "accel_to_decel_factor": [
+      "50%"
+    ],
+    "activate_air_filtration": [
+      "0"
+    ],
+    "activate_chamber_temp_control": [
+      "0"
+    ],
+    "adaptive_bed_mesh_margin": "0",
+    "adaptive_pressure_advance": [
+      "0"
+    ],
+    "adaptive_pressure_advance_bridges": [
+      "0"
+    ],
+    "adaptive_pressure_advance_model": [
+      "0,0,0\n0,0,0"
+    ],
+    "adaptive_pressure_advance_overhangs": [
+      "0"
+    ],
+    "additional_cooling_fan_speed": [
+      "70"
+    ],
+    "align_infill_direction_to_model": "0",
+    "alternate_extra_wall": "0",
+    "auxiliary_fan": "1",
+    "bbl_calib_mark_logo": "1",
+    "bbl_use_printhost": "0",
+    "bed_custom_model": "",
+    "bed_custom_texture": "",
+    "bed_exclude_area": [
+      "0x0"
+    ],
+    "bed_mesh_max": "99999,99999",
+    "bed_mesh_min": "-99999,-99999",
+    "bed_mesh_probe_distance": "50,50",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
+    "best_object_pos": "0.5,0.5",
+    "bottom_shell_layers": "3",
+    "bottom_shell_thickness": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_density": "100%",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": [
+      "50%"
+    ],
+    "bridge_angle": "0",
+    "bridge_density": "70%",
+    "bridge_flow": "0.7",
+    "bridge_no_support": "0",
+    "bridge_speed": [
+      "30"
+    ],
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0.1",
+    "brim_type": "auto_brim",
+    "brim_width": "5",
+    "calib_flowrate_topinfill_special_order": "0",
+    "chamber_temperature": [
+      "0"
+    ],
+    "change_extrusion_role_gcode": "",
+    "change_filament_gcode": ";===== date: 20251213 =====================\n\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n{\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\nif travel_speed < max_speed_toolchange then\n      speed_toolchange = travel_speed;\nendif\n\"G91\nG1 Z1.5 F1800\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n      \"\n\";\n      \"; \" + layer_num + \"\n\";\n      if layer_num == 0 then\n            \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      else\n            \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n      endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n",
+    "close_fan_the_first_x_layers": [
+      "1"
+    ],
+    "complete_print_exhaust_fan_speed": [
+      "70"
+    ],
+    "cool_plate_temp": [
+      "35"
+    ],
+    "cool_plate_temp_initial_layer": [
+      "35"
+    ],
+    "cooling_tube_length": "5",
+    "cooling_tube_retraction": "91.5",
+    "counterbore_hole_bridging": "none",
+    "curr_bed_type": "Textured PEI Plate",
+    "default_acceleration": [
+      "10000"
+    ],
+    "default_bed_type": "Textured PEI Plate",
+    "default_filament_colour": [
+      ""
+    ],
+    "default_filament_profile": [
+      "Snapmaker PLA"
+    ],
+    "default_jerk": [
+      "0"
+    ],
+    "default_junction_deviation": [
+      "0"
+    ],
+    "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
+    "delta_temperature": "0",
+    "deretraction_speed": [
+      "30",
+      "30",
+      "30",
+      "30"
+    ],
+    "detect_narrow_internal_solid_infill": "1",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "0",
+    "disable_m73": "0",
+    "dithering_local_z_direct_multicolor": "0",
+    "dithering_local_z_infill": "0",
+    "dithering_local_z_mode": "0",
+    "dithering_local_z_whole_objects": "0",
+    "dithering_step_painted_zones_only": "1",
+    "dithering_z_step_size": "0",
+    "dont_filter_internal_bridges": "disabled",
+    "dont_slow_down_outer_wall": [
+      "0"
+    ],
+    "draft_shield": "disabled",
+    "during_print_exhaust_fan_speed": [
+      "70"
+    ],
+    "elefant_foot_compensation": "0.15",
+    "elefant_foot_compensation_layers": "1",
+    "emit_machine_limits_to_gcode": "1",
+    "enable_arc_fitting": "0",
+    "enable_change_pressure_when_wiping": "1",
+    "enable_extra_bridge_layer": "disabled",
+    "enable_filament_ramming": "0",
+    "enable_long_retraction_when_cut": "0",
+    "enable_overhang_bridge_fan": [
+      "1"
+    ],
+    "enable_overhang_speed": [
+      "1"
+    ],
+    "enable_pressure_advance": [
+      "0"
+    ],
+    "enable_prime_tower": "1",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "eng_plate_temp": [
+      "45"
+    ],
+    "eng_plate_temp_initial_layer": [
+      "45"
+    ],
+    "ensure_vertical_shell_thickness": "ensure_all",
+    "exclude_object": "1",
+    "extra_loading_move": "-2",
+    "extra_perimeters_on_overhangs": "0",
+    "extra_solid_infills": "",
+    "extruder_clearance_height_to_lid": "140",
+    "extruder_clearance_height_to_rod": "27.5",
+    "extruder_clearance_radius": "72.5",
+    "extruder_colour": [
+      "#FCE94F",
+      "#FCE94F",
+      "#FCE94F",
+      "#FCE94F"
+    ],
+    "extruder_offset": [
+      "0x0",
+      "0x0",
+      "0x0",
+      "0x0"
+    ],
+    "extrusion_rate_smoothing_external_perimeter_only": [
+      "0"
+    ],
+    "fan_cooling_layer_time": [
+      "100"
+    ],
+    "fan_kickstart": "0",
+    "fan_max_speed": [
+      "100"
+    ],
+    "fan_min_speed": [
+      "100"
+    ],
+    "fan_speedup_overhangs": "1",
+    "fan_speedup_time": "0",
+    "filament_colour": [
+      "#F2754E"
+    ],
+    "filament_colour_mode": [
+      "0"
+    ],
+    "filament_cooling_final_speed": [
+      "3.4"
+    ],
+    "filament_cooling_initial_speed": [
+      "2.2"
+    ],
+    "filament_cooling_moves": [
+      "4"
+    ],
+    "filament_cost": [
+      "24.99"
+    ],
+    "filament_density": [
+      "1.26"
+    ],
+    "filament_deretraction_speed": [
+      "30"
+    ],
+    "filament_diameter": [
+      "1.75"
+    ],
+    "filament_end_gcode": [
+      " "
+    ],
+    "filament_flow_ratio": [
+      "0.98"
+    ],
+    "filament_flow_step_size": [
+      "1"
+    ],
+    "filament_flow_support": [
+      "standard"
+    ],
+    "filament_grouping_mode": "standard",
+    "filament_ids": [
+      "1195313935018"
+    ],
+    "filament_is_high_temperature": [
+      "0"
+    ],
+    "filament_is_support": [
+      "0"
+    ],
+    "filament_loading_speed": [
+      "28"
+    ],
+    "filament_loading_speed_start": [
+      "3"
+    ],
+    "filament_long_retractions_when_cut": [
+      "nil"
+    ],
+    "filament_max_volumetric_speed": [
+      "20"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+      "15"
+    ],
+    "filament_multi_colors": [
+      ""
+    ],
+    "filament_multitool_ramming": [
+      "1"
+    ],
+    "filament_multitool_ramming_flow": [
+      "30"
+    ],
+    "filament_multitool_ramming_volume": [
+      "5"
+    ],
+    "filament_notes": [
+      ""
+    ],
+    "filament_ramming_parameters": [
+      "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+    "filament_retract_before_wipe": [
+      "nil"
+    ],
+    "filament_retract_length_toolchange": [
+      "5"
+    ],
+    "filament_retract_lift_above": [
+      "nil"
+    ],
+    "filament_retract_lift_below": [
+      "nil"
+    ],
+    "filament_retract_lift_enforce": [
+      "nil"
+    ],
+    "filament_retract_restart_extra": [
+      "nil"
+    ],
+    "filament_retract_restart_extra_toolchange": [
+      "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+      "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+      "nil"
+    ],
+    "filament_retraction_length": [
+      "1.6"
+    ],
+    "filament_retraction_minimum_travel": [
+      "nil"
+    ],
+    "filament_retraction_speed": [
+      "30"
+    ],
+    "filament_settings_id": [
+      "Snapmaker PLA SnapSpeed @U1 0.8 nozzle"
+    ],
+    "filament_shrink": [
+      "100%"
+    ],
+    "filament_shrinkage_compensation_z": [
+      "100%"
+    ],
+    "filament_soluble": [
+      "0"
+    ],
+    "filament_stamping_distance": [
+      "0"
+    ],
+    "filament_stamping_loading_speed": [
+      "0"
+    ],
+    "filament_start_gcode": [
+      " "
+    ],
+    "filament_toolchange_delay": [
+      "0"
+    ],
+    "filament_tower_ironing_area": [
+      "4"
+    ],
+    "filament_type": [
+      "PLA"
+    ],
+    "filament_unloading_speed": [
+      "90"
+    ],
+    "filament_unloading_speed_start": [
+      "100"
+    ],
+    "filament_vendor": [
+      "snapmaker"
+    ],
+    "filament_volume_type": [
+      "standard",
+      "standard",
+      "standard",
+      "standard"
+    ],
+    "filament_wipe": [
+      "nil"
+    ],
+    "filament_wipe_distance": [
+      "nil"
+    ],
+    "filament_z_hop": [
+      "nil"
+    ],
+    "filament_z_hop_types": [
+      "nil"
+    ],
+    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "fill_multiline": "1",
+    "filter_out_gap_fill": "1",
+    "first_layer_print_sequence": [
+      "0"
+    ],
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "flush_multiplier": "0.3",
+    "flush_volumes_matrix": [
+      "0",
+      "280",
+      "280",
+      "280",
+      "280",
+      "0",
+      "280",
+      "280",
+      "280",
+      "280",
+      "0",
+      "280",
+      "280",
+      "280",
+      "280",
+      "0"
+    ],
+    "flush_volumes_vector": [
+      "140",
+      "140",
+      "140",
+      "140",
+      "140",
+      "140",
+      "140",
+      "140"
+    ],
+    "full_fan_speed_layer": [
+      "0"
+    ],
+    "fuzzy_skin": "none",
+    "fuzzy_skin_first_layer": "0",
+    "fuzzy_skin_mode": "displacement",
+    "fuzzy_skin_noise_type": "classic",
+    "fuzzy_skin_octaves": "4",
+    "fuzzy_skin_persistence": "0.5",
+    "fuzzy_skin_point_distance": "0.3",
+    "fuzzy_skin_scale": "1",
+    "fuzzy_skin_thickness": "0.2",
+    "gap_fill_target": "topbottom",
+    "gap_infill_speed": [
+      "50"
+    ],
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_flavor": "klipper",
+    "gcode_label_objects": "1",
+    "graphic_effect_plate_temp": [
+      "65"
+    ],
+    "graphic_effect_plate_temp_initial_layer": [
+      "65"
+    ],
+    "has_scarf_joint_seam": "0",
+    "head_wrap_detect_zone": [],
+    "high_current_on_filament_swap": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "host_type": "octoprint",
+    "hot_plate_temp": [
+      "55"
+    ],
+    "hot_plate_temp_initial_layer": [
+      "55"
+    ],
+    "idle_temperature": [
+      "0"
+    ],
+    "independent_support_layer_height": "0",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
+    "infill_combination": "0",
+    "infill_combination_max_layer_height": "100%",
+    "infill_direction": "45",
+    "infill_jerk": [
+      "9"
+    ],
+    "infill_lock_depth": "1",
+    "infill_overhang_angle": "60",
+    "infill_shift_step": "0.4",
+    "infill_wall_overlap": "15%",
+    "initial_layer_acceleration": [
+      "500"
+    ],
+    "initial_layer_infill_speed": [
+      "55"
+    ],
+    "initial_layer_jerk": [
+      "9"
+    ],
+    "initial_layer_line_width": "0.82",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.4",
+    "initial_layer_speed": [
+      "35"
+    ],
+    "initial_layer_travel_speed": [
+      "100%"
+    ],
+    "inner_wall_acceleration": [
+      "10000"
+    ],
+    "inner_wall_jerk": [
+      "9"
+    ],
+    "inner_wall_line_width": "0.82",
+    "inner_wall_speed": [
+      "150"
+    ],
+    "interface_shells": "0",
+    "interlocking_beam": "0",
+    "interlocking_beam_layer_count": "2",
+    "interlocking_beam_width": "0.8",
+    "interlocking_boundary_avoidance": "2",
+    "interlocking_depth": "2",
+    "interlocking_orientation": "22.5",
+    "internal_bridge_angle": "0",
+    "internal_bridge_density": "100%",
+    "internal_bridge_fan_speed": [
+      "-1"
+    ],
+    "internal_bridge_flow": "1",
+    "internal_bridge_speed": [
+      "100%"
+    ],
+    "internal_solid_infill_acceleration": [
+      "100%"
+    ],
+    "internal_solid_infill_line_width": "0.82",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": [
+      "150"
+    ],
+    "ironing_angle": "-1",
+    "ironing_fan_speed": [
+      "-1"
+    ],
+    "ironing_flow": "10%",
+    "ironing_inset": "0",
+    "ironing_pattern": "rectilinear",
+    "ironing_spacing": "0.15",
+    "ironing_speed": [
+      "30"
+    ],
+    "ironing_type": "no ironing",
+    "is_infill_first": "0",
+    "lateral_lattice_angle_1": "-45",
+    "lateral_lattice_angle_2": "45",
+    "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}",
+    "layer_height": "0.32",
+    "line_width": "0.82",
+    "local_z_wipe_tower_purge_lines": "3",
+    "long_retractions_when_cut": [
+      "0",
+      "0",
+      "0",
+      "0"
+    ],
+    "machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nPRINT_END\nTIMELAPSE_STOP",
+    "machine_load_filament_time": "0",
+    "machine_max_acceleration_e": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+      "5000",
+      "5000"
+    ],
+    "machine_max_acceleration_travel": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_x": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_y": [
+      "20000",
+      "20000"
+    ],
+    "machine_max_acceleration_z": [
+      "500",
+      "200"
+    ],
+    "machine_max_jerk_e": [
+      "2.5",
+      "2.5"
+    ],
+    "machine_max_jerk_x": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_y": [
+      "9",
+      "9"
+    ],
+    "machine_max_jerk_z": [
+      "3",
+      "0.4"
+    ],
+    "machine_max_junction_deviation": [
+      "0",
+      "0"
+    ],
+    "machine_max_speed_e": [
+      "30",
+      "25"
+    ],
+    "machine_max_speed_x": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_y": [
+      "500",
+      "200"
+    ],
+    "machine_max_speed_z": [
+      "20",
+      "12"
+    ],
+    "machine_min_extruding_rate": [
+      "0",
+      "0"
+    ],
+    "machine_min_travel_rate": [
+      "0",
+      "0"
+    ],
+    "machine_pause_gcode": "M600",
+    "machine_start_gcode": ";===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n{if chamber_cooling_mode==0}\n; 保温\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif chamber_cooling_mode==2}\n; 强冷\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\n; 弱冷\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                    \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nG28 Z Z_OFFSET -0.07                                                                                                                                                                                                                                     \n{else}                                                                                                                                                                                                               \nG28 Z                                                                                                                                                                                                                                                                                                                                                                                                                                                                          \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                  \n{elsif curr_bed_type==\"Graphic Effect Plate\"}                                                                                                                                                                                                          \nBED_MESH_CALIBRATE PROBE_COUNT=11,11 Z_OFFSET=-0.07                                                                                                                                                                                                                                    \n{else}                                                                                                                                                                                                               \nBED_MESH_CALIBRATE PROBE_COUNT=11,11                                                                                                                                                                                                                                                                                                                                                                                                                                                                         \n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
+    "machine_tool_change_time": "5",
+    "machine_unload_filament_time": "0",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "manual_filament_change": "0",
+    "max_bridge_length": "10",
+    "max_layer_height": [
+      "0.56",
+      "0.56",
+      "0.56",
+      "0.56"
+    ],
+    "max_resonance_avoidance_speed": "120",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": [
+      "0"
+    ],
+    "max_volumetric_extrusion_rate_slope_segment_length": [
+      "3"
+    ],
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_layer_height": [
+      "0.16",
+      "0.16",
+      "0.16",
+      "0.16"
+    ],
+    "min_length_factor": "0.5",
+    "min_resonance_avoidance_speed": "70",
+    "min_skirt_length": "0",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "15",
+    "mixed_color_layer_height_a": "0",
+    "mixed_color_layer_height_b": "0",
+    "mixed_filament_advanced_dithering": "0",
+    "mixed_filament_component_bias_enabled": "0",
+    "mixed_filament_definitions": "",
+    "mixed_filament_gradient_mode": "0",
+    "mixed_filament_height_lower_bound": "0.04",
+    "mixed_filament_height_upper_bound": "0.16",
+    "mixed_filament_pointillism_line_gap": "0",
+    "mixed_filament_pointillism_pixel_size": "0",
+    "mixed_filament_region_collapse": "1",
+    "mixed_filament_surface_indentation": "0",
+    "mmu_segmented_region_interlocking_depth": "0",
+    "mmu_segmented_region_max_width": "0",
+    "name": "project_settings",
+    "notes": "",
+    "nozzle_diameter": [
+      "0.8",
+      "0.8",
+      "0.8",
+      "0.8"
+    ],
+    "nozzle_height": "2.5",
+    "nozzle_hrc": "0",
+    "nozzle_temperature": [
+      "215"
+    ],
+    "nozzle_temperature_initial_layer": [
+      "220"
+    ],
+    "nozzle_temperature_range_high": [
+      "240"
+    ],
+    "nozzle_temperature_range_low": [
+      "190"
+    ],
+    "nozzle_type": "hardened_steel",
+    "nozzle_volume": "143",
+    "nozzle_volume_type": [
+      "standard",
+      "standard",
+      "standard",
+      "standard"
+    ],
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "1",
+    "ooze_prevention": "1",
+    "other_layers_print_sequence": [
+      "0"
+    ],
+    "other_layers_print_sequence_nums": "0",
+    "outer_wall_acceleration": [
+      "5000"
+    ],
+    "outer_wall_jerk": [
+      "9"
+    ],
+    "outer_wall_line_width": "0.82",
+    "outer_wall_speed": [
+      "120"
+    ],
+    "overhang_1_4_speed": [
+      "0"
+    ],
+    "overhang_2_4_speed": [
+      "50"
+    ],
+    "overhang_3_4_speed": [
+      "25"
+    ],
+    "overhang_4_4_speed": [
+      "5"
+    ],
+    "overhang_fan_speed": [
+      "100"
+    ],
+    "overhang_fan_threshold": [
+      "50%"
+    ],
+    "overhang_reverse": "0",
+    "overhang_reverse_internal_only": "0",
+    "overhang_reverse_threshold": "50%",
+    "parking_pos_retraction": "92",
+    "pellet_flow_coefficient": [
+      "0.4157"
+    ],
+    "pellet_modded_printer": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "precise_z_height": "0",
+    "preferred_orientation": "0",
+    "preheat_steps": "1",
+    "preheat_time": "30",
+    "pressure_advance": [
+      "0.018"
+    ],
+    "prime_tower_brim_chamfer": "1",
+    "prime_tower_brim_chamfer_max_width": "4",
+    "prime_tower_brim_width": "5",
+    "prime_tower_width": "30",
+    "prime_volume": "72",
+    "print_compatible_printers": [
+      "Snapmaker U1 (0.8 nozzle)"
+    ],
+    "print_flow_ratio": "1",
+    "print_order": "default",
+    "print_sequence": "by layer",
+    "print_settings_id": "0.32mm Standard @Snapmaker U1 (0.8 nozzle)",
+    "printable_area": [
+      "0.5x1",
+      "270.5x1",
+      "270.5x271",
+      "0.5x271"
+    ],
+    "printable_height": "270.05",
+    "printer_flow_support": [
+      "standard"
+    ],
+    "printer_model": "Snapmaker U1",
+    "printer_notes": "",
+    "printer_settings_id": "Snapmaker U1 (0.8 nozzle)",
+    "printer_structure": "undefine",
+    "printer_technology": "FFF",
+    "printer_variant": "0.8",
+    "printhost_authorization_type": "key",
+    "printhost_ssl_ignore_revoke": "0",
+    "printing_by_object_gcode": "",
+    "process_flow_support": [
+      "standard"
+    ],
+    "purge_in_prime_tower": "0",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "ramming_line_width_ratio": "2",
+    "ramming_pressure_advance_value": "0.02",
+    "reduce_crossing_wall": "0",
+    "reduce_fan_stop_start_freq": [
+      "1"
+    ],
+    "reduce_infill_retraction": "1",
+    "required_nozzle_HRC": [
+      "0"
+    ],
+    "resolution": "0.012",
+    "resonance_avoidance": "0",
+    "retract_before_wipe": [
+      "0%",
+      "0%",
+      "0%",
+      "0%"
+    ],
+    "retract_length_toolchange": [
+      "10",
+      "10",
+      "10",
+      "10"
+    ],
+    "retract_lift_above": [
+      "0",
+      "0",
+      "0",
+      "0"
+    ],
+    "retract_lift_below": [
+      "269",
+      "269",
+      "269",
+      "269"
+    ],
+    "retract_lift_enforce": [
+      "All Surfaces",
+      "All Surfaces",
+      "All Surfaces",
+      "All Surfaces"
+    ],
+    "retract_restart_extra": [
+      "0",
+      "0",
+      "0",
+      "0"
+    ],
+    "retract_restart_extra_toolchange": [
+      "0",
+      "0",
+      "0",
+      "0"
+    ],
+    "retract_when_changing_layer": [
+      "1",
+      "1",
+      "1",
+      "1"
+    ],
+    "retraction_distances_when_cut": [
+      "18",
+      "18",
+      "18",
+      "18"
+    ],
+    "retraction_length": [
+      "1.5",
+      "1.5",
+      "1.5",
+      "1.5"
+    ],
+    "retraction_minimum_travel": [
+      "1",
+      "1",
+      "1",
+      "1"
+    ],
+    "retraction_speed": [
+      "30",
+      "30",
+      "30",
+      "30"
+    ],
+    "role_based_wipe_speed": "1",
+    "scan_first_layer": "0",
+    "scarf_angle_threshold": "155",
+    "scarf_joint_flow_ratio": "1",
+    "scarf_joint_speed": "100%",
+    "scarf_overhang_threshold": "40%",
+    "seam_gap": "15%",
+    "seam_position": "aligned",
+    "seam_slope_conditional": "0",
+    "seam_slope_entire_loop": "0",
+    "seam_slope_inner_walls": "0",
+    "seam_slope_min_length": "20",
+    "seam_slope_start_height": "0",
+    "seam_slope_steps": "10",
+    "seam_slope_type": "none",
+    "silent_mode": "0",
+    "single_extruder_multi_material": "0",
+    "single_extruder_multi_material_priming": "0",
+    "single_loop_draft_shield": "0",
+    "skeleton_infill_density": "25%",
+    "skeleton_infill_line_width": "100%",
+    "skin_infill_density": "25%",
+    "skin_infill_depth": "2",
+    "skin_infill_line_width": "100%",
+    "skirt_distance": "2",
+    "skirt_height": "1",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "skirt_start_angle": "-135",
+    "skirt_type": "combined",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_for_layer_cooling": [
+      "1"
+    ],
+    "slow_down_layer_time": [
+      "4"
+    ],
+    "slow_down_layers": [
+      "0"
+    ],
+    "slow_down_min_speed": [
+      "20"
+    ],
+    "slowdown_for_curled_perimeters": [
+      "0"
+    ],
+    "small_area_infill_flow_compensation": "0",
+    "small_area_infill_flow_compensation_model": [
+      "0,0",
+      "\n0.2,0.4444",
+      "\n0.4,0.6145",
+      "\n0.6,0.7059",
+      "\n0.8,0.7619",
+      "\n1.5,0.8571",
+      "\n2,0.8889",
+      "\n3,0.9231",
+      "\n5,0.9520",
+      "\n10,1"
+    ],
+    "small_perimeter_speed": [
+      "50%"
+    ],
+    "small_perimeter_threshold": [
+      "0"
+    ],
+    "solid_infill_direction": "45",
+    "solid_infill_filament": "1",
+    "solid_infill_rotate_template": "",
+    "sparse_infill_acceleration": [
+      "100%"
+    ],
+    "sparse_infill_density": "15%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.82",
+    "sparse_infill_pattern": "grid",
+    "sparse_infill_rotate_template": "",
+    "sparse_infill_speed": [
+      "100"
+    ],
+    "spiral_finishing_flow_ratio": "0",
+    "spiral_mode": "0",
+    "spiral_mode_max_xy_smoothing": "200%",
+    "spiral_mode_smooth": "0",
+    "spiral_starting_flow_ratio": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-150",
+    "start_end_points": [
+      "30x-3",
+      "54x245"
+    ],
+    "supertack_plate_temp": [
+      "40"
+    ],
+    "supertack_plate_temp_initial_layer": [
+      "40"
+    ],
+    "support_air_filtration": "1",
+    "support_angle": "0",
+    "support_base_pattern": "default",
+    "support_base_pattern_spacing": "2.5",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_chamber_temp_control": "1",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "2",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_not_for_body": "1",
+    "support_interface_pattern": "auto",
+    "support_interface_spacing": "0.5",
+    "support_interface_speed": [
+      "80"
+    ],
+    "support_interface_top_layers": "2",
+    "support_ironing": "0",
+    "support_ironing_flow": "10%",
+    "support_ironing_pattern": "rectilinear",
+    "support_ironing_spacing": "0.1",
+    "support_line_width": "0.82",
+    "support_material_interface_fan_speed": [
+      "-1"
+    ],
+    "support_multi_bed_types": "0",
+    "support_object_first_layer_gap": "0.2",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": [
+      "150"
+    ],
+    "support_style": "default",
+    "support_threshold_angle": "35",
+    "support_threshold_overlap": "50%",
+    "support_top_z_distance": "0.2",
+    "support_type": "tree(auto)",
+    "symmetric_infill_y_axis": "0",
+    "temperature_vitrification": [
+      "45"
+    ],
+    "template_custom_gcode": "",
+    "textured_cool_plate_temp": [
+      "40"
+    ],
+    "textured_cool_plate_temp_initial_layer": [
+      "40"
+    ],
+    "textured_plate_temp": [
+      "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+      "65"
+    ],
+    "thick_bridges": "0",
+    "thick_internal_bridges": "1",
+    "thumbnails": "48x48/PNG, 300x300/PNG",
+    "thumbnails_format": "PNG",
+    "time_cost": "0",
+    "time_lapse_gcode": "",
+    "timelapse_type": "0",
+    "tool_change_temprature_wait": "0",
+    "top_bottom_infill_wall_overlap": "25%",
+    "top_shell_layers": "3",
+    "top_shell_thickness": "0.8",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": [
+      "2000"
+    ],
+    "top_surface_density": "100%",
+    "top_surface_jerk": [
+      "9"
+    ],
+    "top_surface_line_width": "0.82",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": [
+      "150"
+    ],
+    "travel_acceleration": [
+      "10000"
+    ],
+    "travel_jerk": [
+      "12"
+    ],
+    "travel_slope": [
+      "3",
+      "3",
+      "3",
+      "3"
+    ],
+    "travel_speed": [
+      "500"
+    ],
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "45",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "2",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "upward_compatible_machine": [],
+    "use_firmware_retraction": "0",
+    "use_relative_e_distances": "1",
+    "wall_direction": "auto",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "classic",
+    "wall_loops": "2",
+    "wall_sequence": "inner wall/outer wall",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe": [
+      "1",
+      "1",
+      "1",
+      "1"
+    ],
+    "wipe_before_external_loop": "0",
+    "wipe_distance": [
+      "2",
+      "2",
+      "2",
+      "2"
+    ],
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "30",
+    "wipe_tower_extra_flow": "100%",
+    "wipe_tower_extra_rib_length": "8",
+    "wipe_tower_extra_spacing": "120%",
+    "wipe_tower_filament": "0",
+    "wipe_tower_fillet_wall": "1",
+    "wipe_tower_max_purge_speed": "90",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rib_width": "8",
+    "wipe_tower_rotation_angle": "0",
+    "wipe_tower_wall_gap": "1",
+    "wipe_tower_wall_type": "rib",
+    "wipe_tower_x": [
+      "15"
+    ],
+    "wipe_tower_y": [
+      "220"
+    ],
+    "wiping_volumes_extruders": [
+      "70",
+      "70",
+      "70",
+      "70",
+      "70",
+      "70",
+      "70",
+      "70",
+      "70",
+      "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0",
+    "z_hop": [
+      "0.4",
+      "0.4",
+      "0.4",
+      "0.4"
+    ],
+    "z_hop_types": [
+      "Auto Lift",
+      "Auto Lift",
+      "Auto Lift",
+      "Auto Lift"
+    ],
+    "z_hop_when_prime": [
+      "0",
+      "0",
+      "0",
+      "0"
+    ],
+    "z_offset": "0",
+    "from": "project",
+    "version": "2.4.0"
+  },
+  "filamentShape": {
+    "name": "Snapmaker PLA SnapSpeed @U1",
+    "activate_air_filtration": [
+      "0"
+    ],
+    "activate_chamber_temp_control": [
+      "0"
+    ],
+    "adaptive_pressure_advance": [
+      "0"
+    ],
+    "adaptive_pressure_advance_bridges": [
+      "0"
+    ],
+    "adaptive_pressure_advance_model": [
+      "0,0,0\n0,0,0"
+    ],
+    "adaptive_pressure_advance_overhangs": [
+      "0"
+    ],
+    "chamber_temperature": [
+      "0"
+    ],
+    "close_fan_the_first_x_layers": [
+      "1"
+    ],
+    "default_filament_colour": [
+      ""
+    ],
+    "dont_slow_down_outer_wall": [
+      "0"
+    ],
+    "enable_overhang_bridge_fan": [
+      "1"
+    ],
+    "filament_diameter": [
+      "1.75"
+    ],
+    "filament_is_high_temperature": [
+      "0"
+    ],
+    "filament_is_support": [
+      "0"
+    ],
+    "filament_long_retractions_when_cut": [
+      "nil"
+    ],
+    "filament_notes": [
+      ""
+    ],
+    "filament_ramming_parameters": [
+      "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+    ],
+    "filament_retract_before_wipe": [
+      "nil"
+    ],
+    "filament_retract_lift_above": [
+      "nil"
+    ],
+    "filament_retract_lift_below": [
+      "nil"
+    ],
+    "filament_retract_lift_enforce": [
+      "nil"
+    ],
+    "filament_retract_restart_extra": [
+      "nil"
+    ],
+    "filament_retract_restart_extra_toolchange": [
+      "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+      "nil"
+    ],
+    "filament_retraction_distances_when_cut": [
+      "nil"
+    ],
+    "filament_retraction_minimum_travel": [
+      "nil"
+    ],
+    "filament_settings_id": [
+      ""
+    ],
+    "filament_shrink": [
+      "100%"
+    ],
+    "filament_shrinkage_compensation_z": [
+      "100%"
+    ],
+    "filament_soluble": [
+      "0"
+    ],
+    "filament_toolchange_delay": [
+      "0"
+    ],
+    "filament_tower_ironing_area": [
+      "4"
+    ],
+    "filament_type": [
+      "PLA"
+    ],
+    "filament_unloading_speed_start": [
+      "100"
+    ],
+    "filament_wipe": [
+      "nil"
+    ],
+    "filament_wipe_distance": [
+      "nil"
+    ],
+    "full_fan_speed_layer": [
+      "0"
+    ],
+    "idle_temperature": [
+      "0"
+    ],
+    "internal_bridge_fan_speed": [
+      "-1"
+    ],
+    "ironing_fan_speed": [
+      "-1"
+    ],
+    "nozzle_temperature_range_high": [
+      "240"
+    ],
+    "nozzle_temperature_range_low": [
+      "190"
+    ],
+    "overhang_fan_speed": [
+      "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+      "1"
+    ],
+    "slow_down_for_layer_cooling": [
+      "1"
+    ],
+    "support_material_interface_fan_speed": [
+      "-1"
+    ],
+    "textured_cool_plate_temp": [
+      "40"
+    ],
+    "textured_cool_plate_temp_initial_layer": [
+      "40"
+    ],
+    "filament_id": "141703112701",
+    "filament_end_gcode": [
+      "; filament end gcode \n"
+    ],
+    "filament_retraction_length": [
+      "1.2",
+      "1.2"
+    ],
+    "filament_loading_speed_start": [
+      "50"
+    ],
+    "filament_loading_speed": [
+      "10"
+    ],
+    "filament_unloading_speed": [
+      "100"
+    ],
+    "filament_cooling_moves": [
+      "2"
+    ],
+    "filament_cooling_initial_speed": [
+      "10"
+    ],
+    "filament_cooling_final_speed": [
+      "3.5"
+    ],
+    "fan_cooling_layer_time": [
+      "100"
+    ],
+    "filament_max_volumetric_speed": [
+      "20",
+      "40"
+    ],
+    "filament_density": [
+      "1.24"
+    ],
+    "filament_cost": [
+      "20"
+    ],
+    "cool_plate_temp": [
+      "60"
+    ],
+    "eng_plate_temp": [
+      "60"
+    ],
+    "hot_plate_temp": [
+      "65"
+    ],
+    "textured_plate_temp": [
+      "65"
+    ],
+    "cool_plate_temp_initial_layer": [
+      "60"
+    ],
+    "eng_plate_temp_initial_layer": [
+      "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+      "65"
+    ],
+    "textured_plate_temp_initial_layer": [
+      "65"
+    ],
+    "nozzle_temperature_initial_layer": [
+      "220",
+      "220"
+    ],
+    "fan_max_speed": [
+      "100",
+      "100"
+    ],
+    "fan_min_speed": [
+      "100",
+      "100"
+    ],
+    "overhang_fan_threshold": [
+      "50%"
+    ],
+    "nozzle_temperature": [
+      "220",
+      "220"
+    ],
+    "temperature_vitrification": [
+      "45"
+    ],
+    "slow_down_min_speed": [
+      "20"
+    ],
+    "slow_down_layer_time": [
+      "4"
+    ],
+    "additional_cooling_fan_speed": [
+      "70",
+      "70"
+    ],
+    "filament_start_gcode": [
+      "; filament start gcode\n"
+    ],
+    "complete_print_exhaust_fan_speed": [
+      "70"
+    ],
+    "during_print_exhaust_fan_speed": [
+      "70"
+    ],
+    "enable_pressure_advance": [
+      "0",
+      "1"
+    ],
+    "filament_deretraction_speed": [
+      "nil"
+    ],
+    "filament_flow_ratio": [
+      "0.966",
+      "0.966"
+    ],
+    "filament_flow_support": [
+      "standard",
+      "high_flow"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+      "15",
+      "15"
+    ],
+    "filament_multitool_ramming": [
+      "1",
+      "1"
+    ],
+    "filament_multitool_ramming_flow": [
+      "30",
+      "40"
+    ],
+    "filament_multitool_ramming_volume": [
+      "5",
+      "5"
+    ],
+    "filament_retract_length_toolchange": [
+      "5",
+      "5"
+    ],
+    "filament_retraction_speed": [
+      "nil"
+    ],
+    "filament_stamping_distance": [
+      "45"
+    ],
+    "filament_stamping_loading_speed": [
+      "29"
+    ],
+    "filament_vendor": [
+      "Snapmaker"
+    ],
+    "filament_z_hop": [
+      "0.4"
+    ],
+    "filament_z_hop_types": [
+      "Slope Lift",
+      "Slope Lift"
+    ],
+    "graphic_effect_plate_temp": [
+      "65"
+    ],
+    "graphic_effect_plate_temp_initial_layer": [
+      "65"
+    ],
+    "pellet_flow_coefficient": [
+      "0.4157"
+    ],
+    "pressure_advance": [
+      "0.02",
+      "0.024"
+    ],
+    "required_nozzle_HRC": [
+      "0"
+    ],
+    "supertack_plate_temp": [
+      "40"
+    ],
+    "supertack_plate_temp_initial_layer": [
+      "40"
+    ],
+    "filament_load_time": [
+      "2"
+    ],
+    "filament_unload_time": [
+      "2"
+    ]
+  },
+  "highFlowOverrides": {}
+}