antigravity-mobile-proxy 0.1.2 → 0.1.4

package/.next/standalone/node_modules/basic-ftp/dist/transfer.js

@@ -1,318 +0,0 @@
-"use strict";
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.enterPassiveModeIPv6 = enterPassiveModeIPv6;
-exports.parseEpsvResponse = parseEpsvResponse;
-exports.enterPassiveModeIPv4 = enterPassiveModeIPv4;
-exports.enterPassiveModeIPv4_forceControlHostIP = enterPassiveModeIPv4_forceControlHostIP;
-exports.parsePasvResponse = parsePasvResponse;
-exports.connectForPassiveTransfer = connectForPassiveTransfer;
-exports.uploadFrom = uploadFrom;
-exports.downloadTo = downloadTo;
-const netUtils_1 = require("./netUtils");
-const stream_1 = require("stream");
-const tls_1 = require("tls");
-const parseControlResponse_1 = require("./parseControlResponse");
-/**
- * Prepare a data socket using passive mode over IPv6.
- */
-async function enterPassiveModeIPv6(ftp) {
-    const res = await ftp.request("EPSV");
-    const port = parseEpsvResponse(res.message);
-    if (!port) {
-        throw new Error("Can't parse EPSV response: " + res.message);
-    }
-    const controlHost = ftp.socket.remoteAddress;
-    if (controlHost === undefined) {
-        throw new Error("Control socket is disconnected, can't get remote address.");
-    }
-    await connectForPassiveTransfer(controlHost, port, ftp);
-    return res;
-}
-/**
- * Parse an EPSV response. Returns only the port as in EPSV the host of the control connection is used.
- */
-function parseEpsvResponse(message) {
-    // Get port from EPSV response, e.g. "229 Entering Extended Passive Mode (|||6446|)"
-    // Some FTP Servers such as the one on IBM i (OS/400) use ! instead of | in their EPSV response.
-    const groups = message.match(/[|!]{3}(.+)[|!]/);
-    if (groups === null || groups[1] === undefined) {
-        throw new Error(`Can't parse response to 'EPSV': ${message}`);
-    }
-    const port = parseInt(groups[1], 10);
-    if (Number.isNaN(port)) {
-        throw new Error(`Can't parse response to 'EPSV', port is not a number: ${message}`);
-    }
-    return port;
-}
-/**
- * Prepare a data socket using passive mode over IPv4.
- */
-async function enterPassiveModeIPv4(ftp) {
-    const res = await ftp.request("PASV");
-    const target = parsePasvResponse(res.message);
-    if (!target) {
-        throw new Error("Can't parse PASV response: " + res.message);
-    }
-    // If the host in the PASV response has a local address while the control connection hasn't,
-    // we assume a NAT issue and use the IP of the control connection as the target for the data connection.
-    // We can't always perform this replacement because it's possible (although unlikely) that the FTP server
-    // indeed uses a different host for data connections.
-    const controlHost = ftp.socket.remoteAddress;
-    if ((0, netUtils_1.ipIsPrivateV4Address)(target.host) && controlHost && !(0, netUtils_1.ipIsPrivateV4Address)(controlHost)) {
-        target.host = controlHost;
-    }
-    await connectForPassiveTransfer(target.host, target.port, ftp);
-    return res;
-}
-/**
- * Prepare a data socket using passive mode over IPv4. Ignore the IP provided by the PASV response,
- * and use the control host IP. This is the same behaviour as with the more modern variant EPSV. Use
- * this to fix issues around NAT or provide more security by preventing FTP bounce attacks.
- */
-async function enterPassiveModeIPv4_forceControlHostIP(ftp) {
-    const res = await ftp.request("PASV");
-    const target = parsePasvResponse(res.message);
-    if (!target) {
-        throw new Error("Can't parse PASV response: " + res.message);
-    }
-    const controlHost = ftp.socket.remoteAddress;
-    if (controlHost === undefined) {
-        throw new Error("Control socket is disconnected, can't get remote address.");
-    }
-    await connectForPassiveTransfer(controlHost, target.port, ftp);
-    return res;
-}
-/**
- * Parse a PASV response.
- */
-function parsePasvResponse(message) {
-    // Get host and port from PASV response, e.g. "227 Entering Passive Mode (192,168,1,100,10,229)"
-    const groups = message.match(/([-\d]+,[-\d]+,[-\d]+,[-\d]+),([-\d]+),([-\d]+)/);
-    if (groups === null || groups.length !== 4) {
-        throw new Error(`Can't parse response to 'PASV': ${message}`);
-    }
-    return {
-        host: groups[1].replace(/,/g, "."),
-        port: (parseInt(groups[2], 10) & 255) * 256 + (parseInt(groups[3], 10) & 255)
-    };
-}
-function connectForPassiveTransfer(host, port, ftp) {
-    return new Promise((resolve, reject) => {
-        let socket = ftp._newSocket();
-        const handleConnErr = function (err) {
-            err.message = "Can't open data connection in passive mode: " + err.message;
-            reject(err);
-        };
-        const handleTimeout = function () {
-            socket.destroy();
-            reject(new Error(`Timeout when trying to open data connection to ${host}:${port}`));
-        };
-        socket.setTimeout(ftp.timeout);
-        socket.on("error", handleConnErr);
-        socket.on("timeout", handleTimeout);
-        socket.connect({ port, host, family: ftp.ipFamily }, () => {
-            if (ftp.socket instanceof tls_1.TLSSocket) {
-                socket = (0, tls_1.connect)(Object.assign({}, ftp.tlsOptions, {
-                    socket,
-                    // Reuse the TLS session negotiated earlier when the control connection
-                    // was upgraded. Servers expect this because it provides additional
-                    // security: If a completely new session would be negotiated, a hacker
-                    // could guess the port and connect to the new data connection before we do
-                    // by just starting his/her own TLS session.
-                    session: ftp.socket.getSession()
-                }));
-                // It's the responsibility of the transfer task to wait until the
-                // TLS socket issued the event 'secureConnect'. We can't do this
-                // here because some servers will start upgrading after the
-                // specific transfer request has been made. List and download don't
-                // have to wait for this event because the server sends whenever it
-                // is ready. But for upload this has to be taken into account,
-                // see the details in the upload() function below.
-            }
-            // Let the FTPContext listen to errors from now on, remove local handler.
-            socket.removeListener("error", handleConnErr);
-            socket.removeListener("timeout", handleTimeout);
-            ftp.dataSocket = socket;
-            resolve();
-        });
-    });
-}
-/**
- * Helps resolving/rejecting transfers.
- *
- * This is used internally for all FTP transfers. For example when downloading, the server might confirm
- * with "226 Transfer complete" when in fact the download on the data connection has not finished
- * yet. With all transfers we make sure that a) the result arrived and b) has been confirmed by
- * e.g. the control connection. We just don't know in which order this will happen.
- */
-class TransferResolver {
-    /**
-     * Instantiate a TransferResolver
-     */
-    constructor(ftp, progress) {
-        this.ftp = ftp;
-        this.progress = progress;
-        this.response = undefined;
-        this.dataTransferDone = false;
-    }
-    /**
-     * Mark the beginning of a transfer.
-     *
-     * @param name - Name of the transfer, usually the filename.
-     * @param type - Type of transfer, usually "upload" or "download".
-     */
-    onDataStart(name, type) {
-        // Let the data socket be in charge of tracking timeouts during transfer.
-        // The control socket sits idle during this time anyway and might provoke
-        // a timeout unnecessarily. The control connection will take care
-        // of timeouts again once data transfer is complete or failed.
-        if (this.ftp.dataSocket === undefined) {
-            throw new Error("Data transfer should start but there is no data connection.");
-        }
-        this.ftp.socket.setTimeout(0);
-        this.ftp.dataSocket.setTimeout(this.ftp.timeout);
-        this.progress.start(this.ftp.dataSocket, name, type);
-    }
-    /**
-     * The data connection has finished the transfer.
-     */
-    onDataDone(task) {
-        this.progress.updateAndStop();
-        // Hand-over timeout tracking back to the control connection. It's possible that
-        // we don't receive the response over the control connection that the transfer is
-        // done. In this case, we want to correctly associate the resulting timeout with
-        // the control connection.
-        this.ftp.socket.setTimeout(this.ftp.timeout);
-        if (this.ftp.dataSocket) {
-            this.ftp.dataSocket.setTimeout(0);
-        }
-        this.dataTransferDone = true;
-        this.tryResolve(task);
-    }
-    /**
-     * The control connection reports the transfer as finished.
-     */
-    onControlDone(task, response) {
-        this.response = response;
-        this.tryResolve(task);
-    }
-    /**
-     * An error has been reported and the task should be rejected.
-     */
-    onError(task, err) {
-        this.progress.updateAndStop();
-        this.ftp.socket.setTimeout(this.ftp.timeout);
-        this.ftp.dataSocket = undefined;
-        task.reject(err);
-    }
-    /**
-     * Control connection sent an unexpected request requiring a response from our part. We
-     * can't provide that (because unknown) and have to close the contrext with an error because
-     * the FTP server is now caught up in a state we can't resolve.
-     */
-    onUnexpectedRequest(response) {
-        const err = new Error(`Unexpected FTP response is requesting an answer: ${response.message}`);
-        this.ftp.closeWithError(err);
-    }
-    tryResolve(task) {
-        // To resolve, we need both control and data connection to report that the transfer is done.
-        const canResolve = this.dataTransferDone && this.response !== undefined;
-        if (canResolve) {
-            this.ftp.dataSocket = undefined;
-            task.resolve(this.response);
-        }
-    }
-}
-function uploadFrom(source, config) {
-    const resolver = new TransferResolver(config.ftp, config.tracker);
-    const fullCommand = `${config.command} ${config.remotePath}`;
-    return config.ftp.handle(fullCommand, (res, task) => {
-        if (res instanceof Error) {
-            resolver.onError(task, res);
-        }
-        else if (res.code === 150 || res.code === 125) { // Ready to upload
-            const dataSocket = config.ftp.dataSocket;
-            if (!dataSocket) {
-                resolver.onError(task, new Error("Upload should begin but no data connection is available."));
-                return;
-            }
-            // If we are using TLS, we have to wait until the dataSocket issued
-            // 'secureConnect'. If this hasn't happened yet, getCipher() returns undefined.
-            const canUpload = "getCipher" in dataSocket ? dataSocket.getCipher() !== undefined : true;
-            onConditionOrEvent(canUpload, dataSocket, "secureConnect", () => {
-                config.ftp.log(`Uploading to ${(0, netUtils_1.describeAddress)(dataSocket)} (${(0, netUtils_1.describeTLS)(dataSocket)})`);
-                resolver.onDataStart(config.remotePath, config.type);
-                (0, stream_1.pipeline)(source, dataSocket, err => {
-                    if (err) {
-                        resolver.onError(task, err);
-                    }
-                    else {
-                        resolver.onDataDone(task);
-                    }
-                });
-            });
-        }
-        else if ((0, parseControlResponse_1.positiveCompletion)(res.code)) { // Transfer complete
-            resolver.onControlDone(task, res);
-        }
-        else if ((0, parseControlResponse_1.positiveIntermediate)(res.code)) {
-            resolver.onUnexpectedRequest(res);
-        }
-        // Ignore all other positive preliminary response codes (< 200)
-    });
-}
-function downloadTo(destination, config) {
-    if (!config.ftp.dataSocket) {
-        throw new Error("Download will be initiated but no data connection is available.");
-    }
-    const resolver = new TransferResolver(config.ftp, config.tracker);
-    return config.ftp.handle(config.command, (res, task) => {
-        if (res instanceof Error) {
-            resolver.onError(task, res);
-        }
-        else if (res.code === 150 || res.code === 125) { // Ready to download
-            const dataSocket = config.ftp.dataSocket;
-            if (!dataSocket) {
-                resolver.onError(task, new Error("Download should begin but no data connection is available."));
-                return;
-            }
-            config.ftp.log(`Downloading from ${(0, netUtils_1.describeAddress)(dataSocket)} (${(0, netUtils_1.describeTLS)(dataSocket)})`);
-            resolver.onDataStart(config.remotePath, config.type);
-            (0, stream_1.pipeline)(dataSocket, destination, err => {
-                if (err) {
-                    resolver.onError(task, err);
-                }
-                else {
-                    resolver.onDataDone(task);
-                }
-            });
-        }
-        else if (res.code === 350) { // Restarting at startAt.
-            config.ftp.send("RETR " + config.remotePath);
-        }
-        else if ((0, parseControlResponse_1.positiveCompletion)(res.code)) { // Transfer complete
-            resolver.onControlDone(task, res);
-        }
-        else if ((0, parseControlResponse_1.positiveIntermediate)(res.code)) {
-            resolver.onUnexpectedRequest(res);
-        }
-        // Ignore all other positive preliminary response codes (< 200)
-    });
-}
-/**
- * Calls a function immediately if a condition is met or subscribes to an event and calls
- * it once the event is emitted.
- *
- * @param condition  The condition to test.
- * @param emitter  The emitter to use if the condition is not met.
- * @param eventName  The event to subscribe to if the condition is not met.
- * @param action  The function to call.
- */
-function onConditionOrEvent(condition, emitter, eventName, action) {
-    if (condition === true) {
-        action();
-    }
-    else {
-        emitter.once(eventName, () => action());
-    }
-}

package/.next/standalone/node_modules/basic-ftp/package.json

@@ -1,52 +0,0 @@
-{
-  "name": "basic-ftp",
-  "version": "5.2.0",
-  "description": "FTP client for Node.js, supports FTPS over TLS, IPv6, Async/Await, and Typescript.",
-  "main": "dist/index",
-  "types": "dist/index",
-  "files": [
-    "dist/**/*"
-  ],
-  "scripts": {
-    "prepublishOnly": "npm run clean && npm run lint && tsc && mocha",
-    "prepare": "tsc",
-    "test": "npm run prepublishOnly",
-    "clean": "rm -rf dist",
-    "lint": "eslint \"./src/**/*.ts\"",
-    "lint-fix": "eslint --fix \"./src/**/*.ts\"",
-    "dev": "npm run clean && tsc --watch",
-    "tdd": "mocha --watch",
-    "buildOnly": "tsc"
-  },
-  "repository": {
-    "type": "git",
-    "url": "https://github.com/patrickjuchli/basic-ftp.git"
-  },
-  "author": "Patrick Juchli <patrickjuchli@gmail.com>",
-  "license": "MIT",
-  "keywords": [
-    "ftp",
-    "ftps",
-    "promise",
-    "async",
-    "await",
-    "tls",
-    "ipv6",
-    "typescript"
-  ],
-  "engines": {
-    "node": ">=10.0.0"
-  },
-  "devDependencies": {
-    "@eslint/eslintrc": "3.3.3",
-    "@eslint/js": "10.0.1",
-    "@types/mocha": "10.0.10",
-    "@types/node": "25.3.0",
-    "@typescript-eslint/eslint-plugin": "8.56.0",
-    "@typescript-eslint/parser": "8.56.0",
-    "eslint": "10.0.1",
-    "globals": "17.3.0",
-    "mocha": "11.7.5",
-    "typescript": "5.9.3"
-  }
-}

package/.next/standalone/node_modules/buffer-crc32/index.js

@@ -1,111 +0,0 @@
-var Buffer = require('buffer').Buffer;
-
-var CRC_TABLE = [
-  0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
-  0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
-  0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
-  0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
-  0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856,
-  0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
-  0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4,
-  0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-  0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3,
-  0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a,
-  0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599,
-  0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
-  0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190,
-  0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f,
-  0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e,
-  0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-  0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed,
-  0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
-  0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3,
-  0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
-  0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a,
-  0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5,
-  0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010,
-  0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-  0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17,
-  0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6,
-  0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615,
-  0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
-  0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344,
-  0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
-  0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a,
-  0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-  0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1,
-  0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c,
-  0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef,
-  0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
-  0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe,
-  0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31,
-  0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c,
-  0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-  0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b,
-  0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
-  0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1,
-  0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
-  0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278,
-  0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7,
-  0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66,
-  0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-  0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605,
-  0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8,
-  0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b,
-  0x2d02ef8d
-];
-
-if (typeof Int32Array !== 'undefined') {
-  CRC_TABLE = new Int32Array(CRC_TABLE);
-}
-
-function ensureBuffer(input) {
-  if (Buffer.isBuffer(input)) {
-    return input;
-  }
-
-  var hasNewBufferAPI =
-      typeof Buffer.alloc === "function" &&
-      typeof Buffer.from === "function";
-
-  if (typeof input === "number") {
-    return hasNewBufferAPI ? Buffer.alloc(input) : new Buffer(input);
-  }
-  else if (typeof input === "string") {
-    return hasNewBufferAPI ? Buffer.from(input) : new Buffer(input);
-  }
-  else {
-    throw new Error("input must be buffer, number, or string, received " +
-                    typeof input);
-  }
-}
-
-function bufferizeInt(num) {
-  var tmp = ensureBuffer(4);
-  tmp.writeInt32BE(num, 0);
-  return tmp;
-}
-
-function _crc32(buf, previous) {
-  buf = ensureBuffer(buf);
-  if (Buffer.isBuffer(previous)) {
-    previous = previous.readUInt32BE(0);
-  }
-  var crc = ~~previous ^ -1;
-  for (var n = 0; n < buf.length; n++) {
-    crc = CRC_TABLE[(crc ^ buf[n]) & 0xff] ^ (crc >>> 8);
-  }
-  return (crc ^ -1);
-}
-
-function crc32() {
-  return bufferizeInt(_crc32.apply(null, arguments));
-}
-crc32.signed = function () {
-  return _crc32.apply(null, arguments);
-};
-crc32.unsigned = function () {
-  return _crc32.apply(null, arguments) >>> 0;
-};
-
-module.exports = crc32;

package/.next/standalone/node_modules/buffer-crc32/package.json

@@ -1,39 +0,0 @@
-{
-  "author": "Brian J. Brennan <brianloveswords@gmail.com>",
-  "name": "buffer-crc32",
-  "description": "A pure javascript CRC32 algorithm that plays nice with binary data",
-  "version": "0.2.13",
-  "licenses": [
-    {
-      "type": "MIT",
-      "url": "https://github.com/brianloveswords/buffer-crc32/raw/master/LICENSE"
-    }
-  ],
-  "contributors": [
-    {
-      "name": "Vladimir Kuznetsov",
-      "github": "mistakster"
-    }
-  ],
-  "homepage": "https://github.com/brianloveswords/buffer-crc32",
-  "repository": {
-    "type": "git",
-    "url": "git://github.com/brianloveswords/buffer-crc32.git"
-  },
-  "main": "index.js",
-  "scripts": {
-    "test": "./node_modules/.bin/tap tests/*.test.js"
-  },
-  "dependencies": {},
-  "devDependencies": {
-    "tap": "~0.2.5"
-  },
-  "optionalDependencies": {},
-  "engines": {
-    "node": "*"
-  },
-  "license": "MIT",
-  "files": [
-    "index.js"
-  ]
-}