ainecto 0.0.0-stage → 0.5.0

package/README.md

@@ -1,3 +1,320 @@
-# Temporary Holding Version
+# ainecto — AiNecto CLI and MCP connector
 
-This version is a temporary placeholder for this package. An operational version to replace this has been submitted for review and is awaiting a staged release.
+Published as `ainecto`, `@ainecto/mcp` and `@ainecto/cli` — the same code. Command: `ainecto`.
+The older names (`ai-erd`, `@ai-erd/mcp`, `@ai-erd/cli`, command `ai-erd`) still get the same code and
+still work.
+
+**In a terminal, from your repository root:** `npx -y ainecto@latest init` — it asks which role this
+repository's AI sessions should have and which AiNecto project to use, and signs you in through the
+browser if needed.
+
+## For AI agents
+
+**Ask the user which role this repository's AI sessions should have — Design, Development, Test, or Validation. Never pick one yourself. Then, from the repository root: `npx -y ainecto@latest init --role <role>` (it signs the user in through the browser if needed).**
+
+- Use a long command timeout (at least 6 minutes): sign-in waits up to 5 minutes for the user.
+- If `init` lists projects, ask the user which one and re-run with `--project <uuid>`. If it says
+  this is not the repository root, re-run from the folder it names.
+- **No restart is needed.** Right after `init`, keep working in the same session through the CLI:
+  `ainecto` commands run from the repository read its role on every call (read `.ainecto/HARNESS.md`,
+  then `ainecto tools list` and `ainecto tools call <tool> '<json>'`). Do not use MCP tools the session
+  started with for that work — they keep the role (or no role) the session started with.
+- A new session is optional and only adds the role's MCP tools (Claude Code: exit, then `claude -c`
+  in this folder to keep the conversation; approve the `ainecto` server from `.mcp.json` when asked).
+  Codex: save the profile `init` prints and start with `codex -p <role>`.
+- **A server added during a session is not available in that session.** In our test, a server added
+  with `claude mcp add` while Claude Code was running did not attach to the running session — that is
+  why the CLI is the way to keep going. `/mcp` shows what the current session actually loaded.
+- Inside the repository, `ainecto` commands (`ainecto tools call …`) use the repository's role
+  automatically — do not pass `--role`; a different `--role` is refused.
+- Claude Code's auto mode may block running an external package with `npx`. If it does, ask the user
+  to allow the command.
+
+To connect AiNecto without a repository role (for example before `init`), add the remote server at
+**user scope** under the name `ainecto` — a local-scope entry would hide the `.mcp.json` that `init`
+writes, and a different name would sit next to it as a second server with no role:
+
+```bash
+claude mcp add --scope user --transport http ainecto https://ainecto.com/mcp  # Claude Code
+codex mcp add ainecto --url https://ainecto.com/mcp                           # Codex
+```
+
+The client signs the user in on first use. That session has no role until `init` runs and a new
+session starts.
+
+## Upgrading from ai-erd (0.4.x)
+
+Version 0.5.0 renamed what `init` writes into a repository. A repository set up by 0.4.x keeps
+working: the CLI reads the `ai-erd` server entry, the `.ai-erd/` folder, the `<!-- ai-erd:begin -->`
+block and `AI_ERD_ROLE` as its own. Running `npx -y ainecto@latest init` again moves them to the new
+names — nothing is left behind twice:
+
+| 0.4.x | 0.5.0 |
+| --- | --- |
+| server entry `"ai-erd"` (`npx -y @ai-erd/mcp --role …`) | `"ainecto"` (`npx -y @ainecto/mcp --role …`) — the old entry is replaced |
+| folder `.ai-erd/` (`HARNESS.md`, `config.json`, `init-record.json`) | `.ainecto/` — moved, and the old folder removed if 0.4.x created it |
+| block `<!-- ai-erd:begin -->` … `<!-- ai-erd:end -->` | `<!-- ainecto:begin -->` … — replaced in place |
+| `AI_ERD_ROLE` | `AINECTO_ROLE` — both are read; when both are set, `AINECTO_ROLE` wins |
+
+`ainecto init --undo` still puts back what was there before the 0.4.x `init`, with or without that
+second `init`. Not renamed: the role header and OAuth scope the server reads, and the sign-in on
+this machine.
+
+- If you added AiNecto earlier as `ai-erd` at Claude Code **user** scope or in Codex, remove it
+  (`claude mcp remove ai-erd -s user`, `codex mcp remove ai-erd`) and add it as `ainecto` as above:
+  under a different name it no longer hides behind the repository's entry.
+- Claude Code shows the tools as `mcp__ainecto__…` instead of `mcp__ai-erd__…` — update any allow
+  list that names the old prefix.
+- An `ai-erd` 0.4.x installed globally does not know the new names: inside a repository set up by
+  0.5.0 it finds no role (so no restriction), and running its `init` there adds a second entry, block
+  and folder. Update it (`npm install -g ai-erd@latest` gets this same code). If that already
+  happened, 0.5.0 stops and says how to undo it (`npx -y -p @ai-erd/mcp@0.4.6 ai-erd init --undo`).
+
+## Set up a repository (roles)
+
+```bash
+npx -y ainecto@latest init                     # in a terminal: asks for the role and the project
+npx -y ainecto@latest init --role development  # agents, scripts, CI: nothing is asked
+```
+
+In a terminal (stdin and stdout both a TTY, no `--json`, and not under an agent or CI — `CLAUDECODE`,
+`CI`, `GEMINI_CLI`, `CODEX_SANDBOX`, `CURSOR_AGENT`) `init` asks for what was not given:
+- the role, unless `--role` or `AINECTO_ROLE` is set — by number, with no default. The role already
+  set on the repository is the default only when there is one (if its agent configs disagree, there
+  is no default);
+- the project, unless `--project` is set — by number; «Create a new project» is offered to Design only.
+
+Ctrl+C or Ctrl+D at a question cancels without writing repository files (Ctrl+D exits with 130). A
+sign-in you already completed stays saved, and choosing «Create a new project» creates it right away.
+Anywhere else (an agent's shell, CI) it asks nothing. In both cases:
+
+- If this machine is not signed in to AiNecto yet, `init` opens a browser and continues once the user
+  approves — **once per machine** (per server), not per role. The sign-in URL is printed first (with
+  `--json`, as one JSON line on stderr: `{"event":"login_url","url":…}`), and sign-in gives up after
+  5 minutes. It fails at once
+  when the command that opens the browser is missing, or (except on Windows, where the exit code is
+  not reliable) exits with an error.
+- Outside a terminal, with no `--role`/`AINECTO_ROLE` it uses the role already set on the repository.
+  If there is none (or the repository's agent configs disagree) it stops and says to ask the user —
+  it never picks a role for you. If the account has more than one project it lists them and stops;
+  re-run with `--project <uuid>`. With no project yet,
+  only a Design session can create one (`--yes`, optionally `--project-name <name>`); in any other
+  role it asks you to have the user create the project, then re-run with the same role.
+- It stops when run from a sub-folder of a git repository, and tells you the root.
+- It writes one `ainecto` server entry carrying `--role` into `.mcp.json` (Claude Code) and
+  `.cursor/mcp.json` (Cursor), and prints the Codex profile to use (`codex -p <role>`).
+- `ainecto` commands in the repository use the new role **at once**; MCP tools pick it up in a **new
+  session** (a running session's MCP tools keep the role they started with). Roles are a working
+  guardrail, not a security boundary.
+- `ainecto init --dry-run` shows what would change (it does not sign in or refresh a sign-in);
+  `ainecto init --undo` removes what it wrote.
+
+## Commands
+
+Prefer `npx -y ainecto@latest <command>`. To install once instead, use `npm install -g ainecto` — but
+install only **one** of `ainecto`, `@ainecto/mcp`, `@ainecto/cli`, `ai-erd`, `@ai-erd/mcp` and
+`@ai-erd/cli` globally: they are the same code and ship the same commands, so a second global install
+conflicts. (`ainecto` and `ai-erd` carry both commands, `ainecto` and `ai-erd`; `@ainecto/cli` carries
+only `ainecto`, `@ai-erd/cli` only `ai-erd`.)
+
+```bash
+ainecto auth login          # once per machine (and per --env); not per role
+ainecto auth status
+ainecto auth logout
+
+ainecto tools list
+ainecto tools call list_projects --json
+ainecto tools call erd_apply_changes -f changes.json --json
+cat payload.json | ainecto tools call erd_apply_changes --json
+
+ainecto projects list
+ainecto erd apply-changes -f erd-operations.json --yes
+```
+
+`ai-erd` is the same command under its older name — every `ainecto …` line works as `ai-erd …`.
+
+**The role comes from the repository.** Inside a folder set up with `ainecto init` (the command looks
+from the current folder upward for the first `.mcp.json`/`.cursor/mcp.json` with an `ainecto` entry —
+or, from 0.4.x, an `ai-erd` entry), every command uses that folder's role without `--role`. A `--role`
+or `AINECTO_ROLE` (or `AI_ERD_ROLE`) that differs from it is refused — the role changes only with
+`ainecto init --role <role>`, after asking the user. If the role there cannot be read (the
+`@ainecto/mcp` bridge entry without a valid `--role`, configs that disagree, an `ainecto` and an
+`ai-erd` bridge with different roles, broken JSON that mentions `ainecto` or `ai-erd`, a link that
+points outside the folder), the command stops. An entry that is not this bridge (for example an HTTP
+`url` or `mcp-remote` entry) means no role there. Your home folder itself is never read as a
+repository (`~/.cursor/mcp.json` is Cursor's global config). Outside such a folder there is no role
+(no restriction), and `--role` narrows it.
+Tool names are the server's own names (`list_projects`, `erd_apply_changes`, …). Your AI client
+shows them with its own prefix, for example `mcp__ainecto__list_projects` in Claude Code
+(`mcp__ai-erd__…` for a 0.4.x setup); the CLI does not use that prefix. A tool name that starts with
+the server's older `mcp__ainecto__` prefix is still accepted.
+
+Every command takes `--env dev` for `https://dev.ai-erd.com/mcp`. Endpoint resolution priority:
+
+1. `--endpoint <url>`
+2. `AINECTO_MCP_ENDPOINT`
+3. `--env dev`
+4. production default, `https://ainecto.com/mcp`
+
+Endpoint URLs must use `https:`. Plain `http:` is accepted only for localhost loopback targets such
+as `127.0.0.1`. When `AINECTO_TOKEN` is set, the CLI only sends it to the default prod/dev endpoints
+unless `AINECTO_ALLOW_CUSTOM_ENDPOINT_TOKEN=1` is set for an explicitly trusted custom endpoint.
+
+The commands are `ainecto` and `ai-erd` (the same CLI), `ai-erd-mcp`, and `mcp` (which
+`npx -y @ainecto/mcp` runs). The `AINECTO_*` environment variables above are the **only** names for
+those settings — there is no `AI_ERD_*` equivalent, so do not guess one. (The one `AI_ERD_*` variable
+is `AI_ERD_ROLE`, the older name of `AINECTO_ROLE`.)
+
+## Generated Friendly Commands
+
+Every checked-in generated catalog tool is reachable through its deterministic command path. Scalar
+schema fields are exposed as flags, with both kebab-case and schema-case accepted:
+
+```bash
+ainecto documents list --project-uuid <projectUuid>
+ainecto documents list --projectUuid <projectUuid>
+```
+
+Array or object payloads use the first-party CLI JSON payload reader:
+
+```bash
+ainecto documents create -f create-documents.json
+cat erd-operations.json | ainecto erd apply-changes --json
+```
+
+Destructive generated commands prompt in human mode unless `--yes` is supplied. In `--json` mode
+they fail with a structured error unless `--yes` is present.
+
+Attachment file upload is available through a bespoke command that performs the upload-token, raw
+PUT, and attachment registration flow:
+
+```bash
+ainecto attachments upload --document-uuid <documentUuid> ./diagram.png ./notes.pdf
+```
+
+The generated `request_upload_token` and `upload_attachments` paths remain raw MCP argument-contract
+commands and do not read local files.
+
+## Connector Mode
+
+```bash
+ainecto mcp --role <design|development|test|validation> [--env dev]
+```
+
+The package doubles as a stdio-to-HTTP proxy for the resolved `/mcp` endpoint. It proxies
+`initialize`, `tools/list`, and `tools/call`, does not rewrite remote schemas, and does not interpret
+local file references. It uses this machine's one sign-in (`ainecto auth login`, or the sign-in
+`ainecto init` performs) and never opens a browser on its own. Its role comes only from `--role` (or
+`AINECTO_ROLE`, or the older `AI_ERD_ROLE`) and is sent with every request; the server applies it.
+
+This is the entry `ainecto init` writes into a repository's MCP config — you normally do not add it
+by hand:
+
+```json
+{
+  "mcpServers": {
+    "ainecto": {
+      "command": "npx",
+      "args": ["-y", "@ainecto/mcp", "--role", "development"]
+    }
+  }
+}
+```
+
+A bridge without a role has no restriction. If a session inside a set-up repository still has no role,
+another `ainecto` entry (for example Claude Code's local scope) is usually hiding the one `init` wrote —
+check with `claude mcp get ainecto`. An entry under another name (an older `ai-erd` one, say) does not
+hide it but adds a second server with no role — remove it.
+
+### MCP Registry
+
+`server.json` is the Registry entry `io.github.codelives/ainecto` (same as `package.json#mcpName`). It
+lists only the npm package `@ainecto/mcp` — the per-repository role bridge `init` writes. Registry
+publication requires the npm version it references to carry that `mcpName`, so publish npm first.
+Registration is done by a person:
+
+1. `npm run release -- --otp=<code>` (below) so that `@ainecto/mcp@<version>` is on npm.
+2. GitHub org namespace login as a `codelives` org **Owner** — a classic PAT with only `read:org`
+   works where the browser login did not: `MCP_GITHUB_TOKEN=<pat> mcp-publisher login github`.
+3. `mcp-publisher publish` from this folder. The new version simply replaces the package identifier
+   (`@ai-erd/mcp` up to 0.4.x → `@ainecto/mcp`); the server name does not change.
+
+Leave the other entry, `com.ai-erd/ai-erd` (the remote `https://ai-erd.com/mcp`, ai-erd.com domain
+namespace), as it is. One remote URL can belong to one server only; listing `https://ainecto.com/mcp`
+as a remote here, or a `com.ainecto/*` name, would need ainecto.com domain auth
+(`mcp-publisher login dns|http --domain ainecto.com`) and is not part of this release.
+
+## Development
+
+```bash
+npm install
+npm run typecheck
+npm test
+npm run build
+npm link            # puts `ainecto` (and `ai-erd`) on your PATH
+```
+
+### Catalog Sync
+
+`sync:tools --check` is intended for publish-time live drift checks. It fails fast when
+`AINECTO_CATALOG_SYNC_TOKEN` is missing, so automatic publish cannot silently fall back to fixtures.
+For local development, `sync:tools` can also use credentials from `ainecto auth login --env <env>`.
+
+```bash
+AINECTO_CATALOG_SYNC_TOKEN=... npm run sync:tools -- --env prod --check
+AINECTO_CATALOG_SYNC_TOKEN=... npm run sync:tools -- --env dev --check
+```
+
+The checked-in generated catalogs are deterministic output from `tools/list`, live-synced from
+`https://ainecto.com/mcp` and `https://dev.ai-erd.com/mcp`. Presentation metadata lives separately in
+`src/core/catalog/enrichments.ts`. `ainecto tools catalog` prints the local generated catalog.
+
+### Local Tarball Smoke
+
+```bash
+npm pack
+npm exec --package ./ainecto-mcp-<version>.tgz -- ainecto --help
+```
+
+### Live Dev MCP Smoke
+
+This requires an authenticated dev token from `ainecto auth login --env dev` or a local developer
+`AINECTO_TOKEN`.
+
+```bash
+npm run smoke:mcp -- --env dev
+```
+
+The smoke initializes MCP, reads `tools/list`, calls `list_projects`, and prints only aggregate
+metadata such as tool count and Task tool exposure.
+
+### Local Attachment Upload Smoke
+
+This exercises the full `attachments upload` flow against a local API dev server: OAuth MCP token
+issue, REST fixture document creation, CLI upload, `list_attachments`, and server filesystem byte
+verification.
+
+```bash
+npm run smoke:attachments -- --base-url http://localhost:8080 --endpoint http://localhost:8080/mcp --api-root <path-to-api-repo>
+```
+
+The smoke creates a temporary user/workspace/project/document and removes the fixture account, local
+temp file, and stored upload file unless `--keep` is supplied.
+
+### Releasing
+
+`npm run release -- --otp=<code>` runs typecheck, test and build once, then publishes that build under
+six names: `@ainecto/mcp` (primary), `ainecto`, `@ainecto/cli` (only the `ainecto` command), and the
+older `@ai-erd/mcp`, `ai-erd`, `@ai-erd/cli` (only the `ai-erd` command). `--dry-run` shows what would
+go out. An already-published name is skipped, so a retry after an expired code is safe.
+
+Before the first 0.5.0 release, by hand: the npm account needs write access to both the `@ainecto` and
+`@ai-erd` orgs (the script checks), and `@ainecto/mcp` versions up to 0.3.0 still carry the 2026-09-29
+deprecation «moved to @ai-erd/mcp» — replace it, for example
+`npm deprecate "@ainecto/mcp@<=0.3.0" "Old version — use @ainecto/mcp@latest"` (new versions are not
+deprecated). Do not unpublish any name.
+
+## Known Limitations
+
+- The MCP connector implements newline-delimited stdio JSON-RPC to HTTP JSON-RPC. Streamable HTTP SSE
+  responses and `MCP-Session-Id` session handling are not implemented.