ai-consultants 4.0.2 → 4.0.4

package/scripts/config.sh

@@ -186,7 +186,7 @@ QWEN3_FORMAT="${QWEN3_FORMAT:-qwen}"
 # GLM CONFIGURATION - The Code Specialist (API-based)
 # =============================================================================
 
-GLM_MODEL="${GLM_MODEL:-glm-5.3}"
+GLM_MODEL="${GLM_MODEL:-glm-5.3-flash}"
 GLM_TIMEOUT_SECONDS="${GLM_TIMEOUT:-180}"
 GLM_API_MAX_TOKENS="${GLM_API_MAX_TOKENS:-16384}"
 GLM_API_URL="${GLM_API_URL:-https://api.z.ai/api/coding/paas/v4/chat/completions}"
@@ -304,12 +304,6 @@ CLAUDE_CMD="${CLAUDE_CMD:-claude}"
 # All available consultants (ordered by typical usage)
 ALL_CONSULTANTS=("Gemini" "Codex" "Mistral" "Kimi" "Claude" "Qwen3" "GLM" "Grok" "DeepSeek" "MiniMax")
 
-# CLI-based consultants (use CLI tools, some support CLI/API switching)
-CLI_CONSULTANTS=("Gemini" "Codex" "Mistral" "Kimi" "Claude" "Qwen3" "Grok" "MiniMax")
-
-# API-only consultants (use HTTP API directly, no CLI available)
-API_CONSULTANTS=("GLM" "DeepSeek")
-
 # =============================================================================
 # ENABLED CONSULTANTS
 # =============================================================================
@@ -435,17 +429,11 @@ BUDGET_ACTION="${BUDGET_ACTION:-warn}"
 # (persistent across reboots; sessions enable follow-up queries).
 SESSION_DIR="${SESSION_DIR:-${_AI_CONSULTANTS_XDG_STATE}/sessions}"
 
-# Days after which to clean old sessions
+# Deprecated no-op; retained through v4.x for configuration compatibility.
 SESSION_CLEANUP_DAYS="${SESSION_CLEANUP_DAYS:-7}"
 
-# =============================================================================
-# INTERACTIVE MODE (v2.0)
-# =============================================================================
-
-# Enable interactive progress bars
+# Deprecated no-ops; retained through v4.x for configuration compatibility.
 ENABLE_PROGRESS_BARS="${ENABLE_PROGRESS_BARS:-true}"
-
-# Enable early termination (Ctrl+C to stop with partial responses)
 ENABLE_EARLY_TERMINATION="${ENABLE_EARLY_TERMINATION:-true}"
 
 # =============================================================================
@@ -485,7 +473,7 @@ ENABLE_SEMANTIC_CHUNKING="${ENABLE_SEMANTIC_CHUNKING:-true}"
 # Maximum tokens per chunk (for chunking mode)
 CHUNK_MAX_TOKENS="${CHUNK_MAX_TOKENS:-500}"
 
-# Use compact prompts (shorter personas and output format)
+# Deprecated no-op; retained through v4.x for configuration compatibility.
 USE_COMPACT_PROMPTS="${USE_COMPACT_PROMPTS:-true}"
 
 # Extract only essential fields for synthesis (instead of full JSON)
@@ -525,8 +513,7 @@ USE_ECONOMIC_MODELS_FOR_SIMPLE="${USE_ECONOMIC_MODELS_FOR_SIMPLE:-true}"
 COMPLEXITY_THRESHOLD_SIMPLE="${COMPLEXITY_THRESHOLD_SIMPLE:-3}"
 COMPLEXITY_THRESHOLD_MEDIUM="${COMPLEXITY_THRESHOLD_MEDIUM:-6}"
 
-# --- Selective Context ---
-# Send only relevant files to each consultant
+# Deprecated no-ops; retained through v4.x for configuration compatibility.
 ENABLE_SELECTIVE_CONTEXT="${ENABLE_SELECTIVE_CONTEXT:-false}"
 MAX_FILES_PER_CONSULTANT="${MAX_FILES_PER_CONSULTANT:-5}"
 
@@ -623,7 +610,7 @@ get_model_for_tier() {
                 codex)    echo "gpt-5.6-sol" ;;
                 mistral)  [[ "$transport" == "api" ]] && echo "mistral-large-3" || echo "mistral-medium-3.5" ;;
                 deepseek) echo "deepseek-v4-pro" ;;
-                glm)      echo "glm-5.3" ;;
+                glm)      echo "glm-5.3-flash" ;;
                 grok)     echo "grok-4.6" ;;
                 qwen3)    echo "qwen3.8-max" ;;
                 kimi)     echo "kimi-code/k3-256k" ;;
@@ -638,7 +625,7 @@ get_model_for_tier() {
                 codex)    echo "gpt-5.6-sol" ;;
                 mistral)  [[ "$transport" == "api" ]] && echo "mistral-large-3" || echo "mistral-medium-3.5" ;;
                 deepseek) echo "deepseek-v4-pro" ;;
-                glm)      echo "glm-5.3" ;;
+                glm)      echo "glm-5.3-flash" ;;
                 grok)     echo "grok-4.6" ;;
                 qwen3)    echo "qwen3.7-max" ;;
                 kimi)     echo "kimi-code/k3" ;;
@@ -653,7 +640,7 @@ get_model_for_tier() {
                 codex)    echo "gpt-5.6-terra" ;;
                 mistral)  [[ "$transport" == "api" ]] && echo "mistral-large-3" || echo "mistral-medium-3.5" ;;
                 deepseek) echo "deepseek-v4-flash" ;;
-                glm)      echo "glm-5.3" ;;  # Same as premium (no mid-tier GLM)
+                glm)      echo "glm-5.3-flash" ;;  # Same as premium (no mid-tier GLM)
                 grok)     echo "grok-4.5" ;;
                 qwen3)    echo "qwen3.6-35b-a3b" ;;  # Open-weight MoE (35B total, 3B active)
                 kimi)     echo "kimi-code/k3" ;;
@@ -1011,4 +998,4 @@ EOF
 # VERSION
 # =============================================================================
 
-AI_CONSULTANTS_VERSION="4.0.2"
+AI_CONSULTANTS_VERSION="4.0.4"

package/scripts/configure.sh

@@ -307,11 +307,14 @@ if [[ "$(read_value "$WORK_FILE" GEMINI_MODEL 2>/dev/null || true)" == "Gemini 3
     echo "Migrated managed Gemini CLI default: Gemini 3.1 Pro (High) -> Gemini 3.7 Flash (High)" >&2
 fi
 
-if [[ "$(read_value "$WORK_FILE" GLM_MODEL 2>/dev/null || true)" == "glm-5.2" ]] \
-    && ! has_value_marker "$WORK_FILE" GLM_MODEL "$PIN_MARKER"; then
-    set_value GLM_MODEL "glm-5.3 $DEFAULT_MARKER"
-    echo "Migrated managed GLM default: glm-5.2 -> glm-5.3" >&2
-fi
+case "$(read_value "$WORK_FILE" GLM_MODEL 2>/dev/null || true)" in
+    glm-5.2|glm-5.3)
+        if ! has_value_marker "$WORK_FILE" GLM_MODEL "$PIN_MARKER"; then
+            set_value GLM_MODEL "glm-5.3-flash $DEFAULT_MARKER"
+            echo "Migrated managed GLM default to glm-5.3-flash" >&2
+        fi
+        ;;
+esac
 
 if [[ "$(read_value "$WORK_FILE" GROK_MODEL 2>/dev/null || true)" == "grok-4.5" ]] \
     && ! has_value_marker "$WORK_FILE" GROK_MODEL "$PIN_MARKER"; then

package/scripts/consult_all.sh

@@ -489,12 +489,12 @@ if [[ ${#SELECTED_CONSULTANTS[@]} -eq 0 ]]; then
     exit 1
 fi
 
-# Minimum 2 consultants required for meaningful comparison
+# Minimum 2 consultants required for a coverage panel
 if [[ ${#SELECTED_CONSULTANTS[@]} -lt 2 ]]; then
-    log_error "At least 2 consultants required for meaningful comparison."
+    log_error "At least 2 consultants are required for a coverage panel."
     log_error "Currently enabled: ${#SELECTED_CONSULTANTS[@]} (${SELECTED_CONSULTANTS[*]})"
     echo "" >&2
-    log_info "Run ./scripts/setup_wizard.sh to configure additional consultants"
+    log_info "Run \"$SCRIPT_DIR/../bin/ai-consultants\" configure to configure additional consultants"
     log_info "Or manually enable more:"
     log_info "  ENABLE_GEMINI=true ENABLE_CODEX=true ./scripts/consult_all.sh \"query\""
     exit 1

package/scripts/doctor.sh

@@ -413,11 +413,11 @@ check_configuration() {
         check_pass
     elif [[ $enabled_count -eq 1 ]]; then
         _print "  ✗ Enabled consultants: $enabled_count (need at least 2)"
-        add_issue "config" "Only 1 consultant enabled, need at least 2" "Run: ./scripts/setup_wizard.sh"
+        add_issue "config" "Only 1 consultant enabled, need at least 2" "Run: \"$SCRIPT_DIR/../bin/ai-consultants\" configure"
         check_fail
     else
         _print "  ✗ Enabled consultants: 0 (need at least 2)"
-        add_issue "config" "No consultants enabled" "Run: ./scripts/setup_wizard.sh"
+        add_issue "config" "No consultants enabled" "Run: \"$SCRIPT_DIR/../bin/ai-consultants\" configure"
         check_fail
     fi
 
@@ -825,8 +825,8 @@ suggest_configuration() {
     if (( available_count < 2 )); then
         echo ""
         echo "# WARNING: Less than 2 consultants available."
-        echo "# AI Consultants requires at least 2 to deliberate."
-        echo "# Install more CLIs or run ./scripts/setup_wizard.sh"
+        echo "# AI Consultants requires at least 2 for a coverage panel."
+        echo "# Install more CLIs or run \"$SCRIPT_DIR/../bin/ai-consultants\" configure"
     fi
 }
 

package/scripts/install.sh

@@ -348,8 +348,8 @@ echo "━━━━━━━━━━━━━━━━━━━━━━━━
 echo ""
 log_info "Option B: Configure via Bash"
 echo ""
-echo "  1. Run the setup wizard:"
-echo "     $INSTALL_DIR/scripts/setup_wizard.sh"
+echo "  1. Configure available consultants:"
+echo "     $INSTALL_DIR/bin/ai-consultants configure"
 echo ""
 echo "  2. Run a consultation:"
 echo "     $INSTALL_DIR/scripts/consult_all.sh \"Your question\""

package/scripts/lib/api.sh

@@ -38,46 +38,6 @@ sanitize_error_message() {
         -e 's/([a-zA-Z0-9_-]{32,})/[POSSIBLE_KEY]/g'
 }
 
-# =============================================================================
-# API KEY VALIDATION
-# =============================================================================
-
-# Check if an API key environment variable is set
-# Usage: check_api_key "QWEN3_API_KEY" "Qwen3"
-check_api_key() {
-    local key_var_name="$1"
-    local consultant_name="$2"
-
-    # Get the value of the environment variable by name
-    local key_value="${!key_var_name:-}"
-
-    if [[ -z "$key_value" ]]; then
-        log_error "[$consultant_name] API key not set: $key_var_name"
-        log_info "Set the $key_var_name environment variable to use $consultant_name"
-        return 1
-    fi
-
-    # Basic validation: key should be non-empty and not contain obvious placeholders
-    if [[ "$key_value" == *"your_"* ]] || [[ "$key_value" == *"YOUR_"* ]] || [[ "$key_value" == "xxx"* ]]; then
-        log_error "[$consultant_name] API key appears to be a placeholder: $key_var_name"
-        return 1
-    fi
-
-    # Validate key format (minimum length, no whitespace)
-    if [[ ${#key_value} -lt 10 ]]; then
-        log_error "[$consultant_name] API key too short: $key_var_name"
-        return 1
-    fi
-
-    if [[ "$key_value" =~ [[:space:]] ]]; then
-        log_error "[$consultant_name] API key contains whitespace: $key_var_name"
-        return 1
-    fi
-
-    log_debug "[$consultant_name] API key validated"
-    return 0
-}
-
 # =============================================================================
 # HTTP ERROR HANDLING
 # =============================================================================
@@ -724,18 +684,3 @@ check_rate_limit() {
 
     return 0
 }
-
-# Clear rate limit state for a consultant (useful for testing)
-# Usage: clear_rate_limit <consultant_name>
-clear_rate_limit() {
-    local consultant_name="$1"
-    local safe_name=$(echo "$consultant_name" | tr '[:upper:]' '[:lower:]' | tr -cs '[:alnum:]' '_')
-    local state_file="${RATE_LIMIT_DIR}/${safe_name}_ratelimit"
-
-    rm -f "$state_file" 2>/dev/null || true
-}
-
-# Clear all rate limit state
-clear_all_rate_limits() {
-    rm -rf "$RATE_LIMIT_DIR" 2>/dev/null || true
-}

package/scripts/lib/cache.sh

@@ -228,30 +228,6 @@ store_cache() {
     mv "$temp_file" "$cache_file"
 }
 
-# Invalidate cache for a specific query
-# Usage: invalidate_cache <query> <category> [consultant] [context_file]
-invalidate_cache() {
-    local query="$1"
-    local category="${2:-GENERAL}"
-    local consultant="${3:-}"
-    local context_file="${4:-}"
-
-    init_cache
-
-    local fingerprint
-    fingerprint=$(generate_fingerprint "$query" "$category" "$context_file")
-
-    if [[ -n "$consultant" ]]; then
-        # Invalidate specific consultant cache
-        local cache_file
-        cache_file=$(_get_cache_path "$fingerprint" "$consultant")
-        rm -f "$cache_file" 2>/dev/null || true
-    else
-        # Invalidate all caches for this fingerprint
-        rm -f "${CACHE_DIR}"/*_"${fingerprint}".json 2>/dev/null || true
-    fi
-}
-
 # Clear all expired cache entries
 # Usage: cleanup_cache
 cleanup_cache() {

package/scripts/lib/code_optimizer.sh

@@ -616,56 +616,3 @@ optimize_code_files() {
     log_success "Optimized $processed of $total_files files"
 }
 
-# =============================================================================
-# TOKEN ESTIMATION
-# =============================================================================
-
-# Estimate token savings from optimization
-# Usage: estimate_token_savings "/path/to/file.py"
-# Returns: JSON with original_tokens, optimized_tokens, savings_percent
-estimate_token_savings() {
-    local file_path="$1"
-
-    if [ ! -f "$file_path" ]; then
-        log_error "File not found: $file_path"
-        return 1
-    fi
-
-    # Get original size
-    local original_chars
-    original_chars=$(wc -c < "$file_path" | tr -d ' ')
-    local original_tokens=$((original_chars / 4))
-
-    # Get optimized size
-    local optimized_content
-    optimized_content=$(optimize_code_file "$file_path")
-    local optimized_chars
-    optimized_chars=$(echo -n "$optimized_content" | wc -c | tr -d ' ')
-    local optimized_tokens=$((optimized_chars / 4))
-
-    # Calculate savings
-    local savings_percent=0
-    if [ "$original_tokens" -gt 0 ]; then
-        savings_percent=$(( (original_tokens - optimized_tokens) * 100 / original_tokens ))
-    fi
-
-    # Output JSON
-    cat <<EOF
-{
-  "file": "$file_path",
-  "original_tokens": $original_tokens,
-  "optimized_tokens": $optimized_tokens,
-  "savings_tokens": $((original_tokens - optimized_tokens)),
-  "savings_percent": $savings_percent
-}
-EOF
-}
-
-# Check if a file should be optimized based on extension
-# Usage: is_optimizable_file "/path/to/file.py"
-is_optimizable_file() {
-    local lang
-    lang=$(detect_language "$1")
-    [ "$lang" != "unknown" ]
-}
-

package/scripts/lib/common.sh

@@ -310,7 +310,7 @@ KNOWN_API_AGENTS="GLM DEEPSEEK"
 # therefore a latent phantom-consultant bug, not a cosmetic omission -- it had
 # drifted 18 flags out of date before the pin below existed.
 # KEEP IN SYNC with the top-level ENABLE_* declarations in config.sh;
-# test_functions.sh::test_known_feature_flags_in_sync fails the build otherwise.
+# test_common.sh::test_known_feature_flags_in_sync fails the build otherwise.
 KNOWN_FEATURE_FLAGS="PERSONA SYNTHESIS CLASSIFICATION SMART_ROUTING \
 COST_TRACKING PROGRESS_BARS EARLY_TERMINATION PREFLIGHT \
 AST_EXTRACTION BUDGET_LIMIT \
@@ -835,29 +835,6 @@ estimate_tokens() {
     echo $((chars / 4))
 }
 
-# Estimate tokens from a file
-# Usage: estimate_tokens_file "/path/to/file"
-estimate_tokens_file() {
-    local file_path="$1"
-    if [[ -f "$file_path" ]]; then
-        local chars
-        chars=$(wc -c < "$file_path" | tr -d ' ')
-        echo $((chars / 4))
-    else
-        echo 0
-    fi
-}
-
-# Log token estimate with label
-# Usage: log_token_estimate "Prompt" "$prompt_text"
-log_token_estimate() {
-    local label="$1"
-    local text="$2"
-    local tokens
-    tokens=$(estimate_tokens "$text")
-    log_debug "$label: ~$tokens tokens (~$((tokens * 4)) chars)"
-}
-
 # =============================================================================
 # RESPONSE BUILDERS (v2.4)
 # =============================================================================
@@ -1316,39 +1293,6 @@ process_consultant_response() {
     return $exit_code
 }
 
-# Check if a consultant is enabled
-# Usage: is_consultant_enabled <consultant_name>
-# Returns: 0 if enabled, 1 if disabled
-is_consultant_enabled() {
-    local name="$1"
-    local name_upper
-    name_upper=$(to_upper "$name")
-    local var_name="ENABLE_${name_upper}"
-
-    # Get default based on consultant type
-    local default="true"
-    case "$name_upper" in
-        GLM|DEEPSEEK)
-            default="false"
-            ;;
-    esac
-
-    [[ "${!var_name:-$default}" == "true" ]]
-}
-
-# Get list of enabled consultants
-# Usage: get_enabled_consultants
-# Output: Space-separated list of enabled consultant names
-get_enabled_consultants() {
-    local enabled=()
-    for consultant in "${ALL_CONSULTANTS[@]}"; do
-        if is_consultant_enabled "$consultant"; then
-            enabled+=("$consultant")
-        fi
-    done
-    echo "${enabled[@]}"
-}
-
 # =============================================================================
 # SYNTHESIS CLI RESOLUTION (v2.10.1)
 # =============================================================================

package/scripts/lib/costs.sh

@@ -650,23 +650,6 @@ generate_cost_report() {
     jq -r '.sessions | .[-5:] | .[] | "    \(.timestamp): \(.id) - $\(.cost)"' "$COST_TRACKING_FILE" 2>/dev/null || echo "    No sessions"
 }
 
-# =============================================================================
-# UTILITY
-# =============================================================================
-
-# Convert tokens to estimated cost (quick helper)
-# Usage: tokens_to_cost <tokens> [model]
-tokens_to_cost() {
-    local tokens="$1"
-    local model="${2:-default}"
-
-    # Assume 60/40 split
-    local input=$((tokens * 60 / 100))
-    local output=$((tokens * 40 / 100))
-
-    estimate_query_cost "$model" "$input" "$output"
-}
-
 # =============================================================================
 # RESPONSE LENGTH LIMITS (v2.3)
 # =============================================================================

package/scripts/lib/personas.sh

@@ -159,16 +159,6 @@ PERSONA_CATALOG="
 # CATALOG FUNCTIONS
 # =============================================================================
 
-# List all available personas
-# Usage: list_personas
-list_personas() {
-    echo "Available Personas:"
-    echo ""
-    echo "$PERSONA_CATALOG" | grep -v '^$' | while IFS='|' read -r id name var desc; do
-        printf "  %2s) %-22s - %s\n" "$id" "$name" "$desc"
-    done
-}
-
 # Get persona info by ID
 # Usage: get_persona_by_id <id> [field]
 # Fields: name, var, desc, all (default: all)
@@ -331,14 +321,6 @@ get_persona_name() {
     echo "External Consultant"
 }
 
-# Get persona ID for a consultant (for configuration display)
-# Usage: get_persona_id "Gemini"
-get_persona_id() {
-    local upper
-    upper=$(_normalize_name "$1")
-    _resolve_persona_id "$upper"
-}
-
 # Build complete system prompt with persona + output format
 # Usage: build_system_prompt "Gemini"
 build_system_prompt() {

package/scripts/lib/reliability.sh

@@ -107,26 +107,3 @@ get_consultant_reliability() {
          | if $a > 0 then (($s * 100) / $a | floor) else -1 end' \
         "$RELIABILITY_FILE" 2>/dev/null || echo "-1"
 }
-
-# Format a short human-readable reliability report, sorted by success% asc.
-# Usage: format_reliability_report
-format_reliability_report() {
-    if [[ ! -f "$RELIABILITY_FILE" ]]; then
-        echo "No reliability data available"
-        return
-    fi
-
-    echo "  Consultant           | Attempts | Success%"
-    echo "  ---------------------|----------|---------"
-    jq -r '
-        .consultants
-        | to_entries
-        | map({name: .key, attempts: (.value.attempts // 0), successes: (.value.successes // 0)})
-        | map(. + {rate: (if .attempts > 0 then (((.successes * 100) / .attempts) | floor) else -1 end)})
-        | sort_by(.rate)
-        | .[]
-        | "  \(.name)|\(.attempts)|\(.rate)"
-    ' "$RELIABILITY_FILE" 2>/dev/null | while IFS='|' read -r name attempts rate; do
-        printf "  %-20s | %-8s | %s%%\n" "$name" "$attempts" "$rate"
-    done
-}

package/scripts/lib/routing.sh

@@ -194,34 +194,6 @@ select_consultants() {
     done
 }
 
-# Get the list of consultants as JSON
-# Usage: get_selected_consultants_json <category> [min_affinity]
-get_selected_consultants_json() {
-    local category="$1"
-    local min_affinity="${2:-7}"
-
-    local consultants
-    consultants=$(select_consultants "$category" "$min_affinity")
-    local json="["
-    local first=true
-
-    while IFS= read -r c; do
-        if [[ -n "$c" ]]; then
-            local score
-            score=$(get_affinity "$category" "$c")
-            if [[ "$first" == "true" ]]; then
-                first=false
-            else
-                json+=","
-            fi
-            json+="{\"consultant\":\"$c\",\"affinity\":$score}"
-        fi
-    done <<< "$consultants"
-
-    json+="]"
-    echo "$json"
-}
-
 # Check if a consultant is recommended for a category
 # Usage: is_recommended <category> <consultant> [min_affinity]
 is_recommended() {
@@ -236,77 +208,36 @@ is_recommended() {
     return 1
 }
 
-# =============================================================================
-# SMART ROUTING MODES
-# =============================================================================
-
-# Determine the routing mode based on the category
-# Usage: get_routing_mode <category>
-# Returns: full|selective|single
+# Backward-compatible routing utilities. The orchestrator selects directly by
+# affinity; these helpers remain for users that source routing.sh.
 get_routing_mode() {
     local category="$1"
-
     case "$category" in
-        SECURITY)
-            # Security: all consultants (important)
-            echo "full"
-            ;;
-        QUICK_SYNTAX)
-            # Syntax: just one needed
-            echo "single"
-            ;;
-        CODE_REVIEW|BUG_DEBUG|ARCHITECTURE)
-            # Important: at least 3
-            echo "selective"
-            ;;
-        *)
-            # Default: all
-            echo "full"
-            ;;
+        SECURITY) echo "full" ;;
+        QUICK_SYNTAX) echo "single" ;;
+        CODE_REVIEW|BUG_DEBUG|ARCHITECTURE) echo "selective" ;;
+        *) echo "full" ;;
     esac
 }
 
-# Get the recommended number of consultants
-# Usage: get_recommended_count <category>
 get_recommended_count() {
-    local category="$1"
-    local mode=$(get_routing_mode "$category")
-
+    local mode
+    mode=$(get_routing_mode "$1")
     case "$mode" in
-        full)
-            echo 10  # All consultants (CLI + API)
-            ;;
-        selective)
-            echo 5  # Subset based on affinity
-            ;;
-        single)
-            echo 1
-            ;;
-        *)
-            echo 10
-            ;;
+        full) echo 10 ;;
+        selective) echo 5 ;;
+        single) echo 1 ;;
+        *) echo 10 ;;
     esac
 }
 
-# =============================================================================
-# TIMEOUT ADJUSTMENTS
-# =============================================================================
-
-# Get recommended timeout for a category
-# Usage: get_category_timeout <category>
 get_category_timeout() {
-    local category="$1"
-    case "$category" in
-        QUICK_SYNTAX)  echo 60 ;;
-        BUG_DEBUG)     echo 180 ;;
-        ARCHITECTURE)  echo 240 ;;
-        SECURITY)      echo 240 ;;
-        CODE_REVIEW)   echo 180 ;;
-        ALGORITHM)     echo 180 ;;
-        DATABASE)      echo 120 ;;
-        API_DESIGN)    echo 180 ;;
-        TESTING)       echo 120 ;;
-        GENERAL|*)     echo 180 ;;
+    case "$1" in
+        QUICK_SYNTAX) echo 60 ;;
+        BUG_DEBUG|CODE_REVIEW|ALGORITHM|API_DESIGN) echo 180 ;;
+        ARCHITECTURE|SECURITY) echo 240 ;;
+        DATABASE|TESTING) echo 120 ;;
+        GENERAL|*) echo 180 ;;
     esac
 }
 
@@ -345,14 +276,12 @@ select_consultants_cost_aware() {
 
     # Simple queries: only economic models, fewer consultants
     if [[ $complexity -le $simple_threshold ]]; then
-        # For simple queries, use only 2 consultants with economic models
         select_consultants "$category" "$min_affinity" 2
         return
     fi
 
     # Medium complexity: balanced selection
     if [[ $complexity -le $medium_threshold ]]; then
-        # Use standard selection but limit to 3-4 consultants
         select_consultants "$category" "$min_affinity" 4
         return
     fi
@@ -395,36 +324,6 @@ get_cost_aware_model() {
     echo ""
 }
 
-# Check if cost-aware routing is enabled
-# Usage: is_cost_aware_routing_enabled
-is_cost_aware_routing_enabled() {
-    [[ "${ENABLE_COST_AWARE_ROUTING:-false}" == "true" ]]
-}
-
-# Get routing summary for logging
-# Usage: get_routing_summary <category> <complexity> <num_consultants>
-get_routing_summary() {
-    local category="$1"
-    local complexity="${2:-5}"
-    local num_consultants="${3:-5}"
-
-    local mode="standard"
-    if is_cost_aware_routing_enabled; then
-        local simple_threshold="${COMPLEXITY_THRESHOLD_SIMPLE:-3}"
-        local medium_threshold="${COMPLEXITY_THRESHOLD_MEDIUM:-6}"
-
-        if [[ $complexity -le $simple_threshold ]]; then
-            mode="economic"
-        elif [[ $complexity -le $medium_threshold ]]; then
-            mode="balanced"
-        else
-            mode="comprehensive"
-        fi
-    fi
-
-    echo "{\"category\":\"$category\",\"complexity\":$complexity,\"mode\":\"$mode\",\"consultants\":$num_consultants}"
-}
-
 # =============================================================================
 # FALLBACK ESCALATION (v2.3 Quality Review)
 # =============================================================================