agileflow 2.92.0 → 2.93.0

package/src/core/agents/integrations.md

@@ -264,131 +264,8 @@ BOUNDARIES
 - Always implement graceful degradation (fallback if external service unavailable)
 
 
-SESSION HARNESS & VERIFICATION PROTOCOL (v2.25.0+)
+<!-- {{SESSION_HARNESS}} -->
 
-**CRITICAL**: Session Harness System prevents agents from breaking functionality, claiming work is done when tests fail, or losing context between sessions.
-
-**PRE-IMPLEMENTATION VERIFICATION**
-
-Before starting work on ANY story:
-
-1. **Check Session Harness**:
-   - Look for `docs/00-meta/environment.json`
-   - If exists → Session harness is active ✅
-   - If missing → Suggest `/agileflow:session:init` to user
-
-2. **Test Baseline Check**:
-   - Read `test_status` from story in `docs/09-agents/status.json`
-   - If `"passing"` → Proceed with implementation ✅
-   - If `"failing"` → STOP. Cannot start new work with failing baseline ⚠️
-   - If `"not_run"` → Run `/agileflow:verify` first to establish baseline
-   - If `"skipped"` → Check why tests are skipped, document override decision
-
-3. **Environment Verification** (if session harness active):
-   - Run `/agileflow:session:resume` to verify environment and load context
-   - Check for regressions (tests were passing, now failing)
-   - If regression detected → Fix before proceeding with new story
-
-**DURING IMPLEMENTATION**
-
-1. **Incremental Testing**:
-   - Run tests frequently during development (not just at end)
-   - Fix test failures immediately (don't accumulate debt)
-   - Use `/agileflow:verify US-XXXX` to check specific story tests
-
-2. **Real-time Status Updates**:
-   - Update `test_status` in status.json as tests are written/fixed
-   - Append bus messages when tests pass milestone checkpoints
-
-**POST-IMPLEMENTATION VERIFICATION**
-
-After completing ANY changes:
-
-1. **Run Full Test Suite**:
-   - Execute `/agileflow:verify US-XXXX` to run tests for the story
-   - Check exit code (0 = success required for completion)
-   - Review test output for warnings or flaky tests
-
-2. **Update Test Status**:
-   - `/agileflow:verify` automatically updates `test_status` in status.json
-   - Verify the update was successful
-   - Expected: `test_status: "passing"` with test results metadata
-
-3. **Regression Check**:
-   - Compare test results to baseline (initial test status)
-   - If new failures introduced → Fix before marking complete
-   - If test count decreased → Investigate deleted tests
-
-4. **Story Completion Requirements**:
-   - Story can ONLY be marked `"in-review"` if `test_status: "passing"` ✅
-   - If tests failing → Story remains `"in-progress"` until fixed ⚠️
-   - No exceptions unless documented override (see below)
-
-**OVERRIDE PROTOCOL** (Use with extreme caution)
-
-If tests are failing but you need to proceed:
-
-1. **Document Override Decision**:
-   - Append bus message with full explanation (include agent ID, story ID, reason, tracking issue)
-
-2. **Update Story Dev Agent Record**:
-   - Add note to "Issues Encountered" section explaining override
-   - Link to tracking issue for the failing test
-   - Document risk and mitigation plan
-
-3. **Create Follow-up Story**:
-   - If test failure is real but out of scope → Create new story
-   - Link dependency in status.json
-   - Notify user of the override and follow-up story
-
-**BASELINE MANAGEMENT**
-
-After completing major milestones (epic complete, sprint end):
-
-1. **Establish Baseline**:
-   - Suggest `/agileflow:baseline "Epic EP-XXXX complete"` to user
-   - Requires: All tests passing, git working tree clean
-   - Creates git tag + metadata for reset point
-
-2. **Baseline Benefits**:
-   - Known-good state to reset to if needed
-   - Regression detection reference point
-   - Deployment readiness checkpoint
-   - Sprint/epic completion marker
-
-**INTEGRATION WITH WORKFLOW**
-
-The verification protocol integrates into the standard workflow:
-
-1. **Before creating feature branch**: Run pre-implementation verification
-2. **Before marking in-review**: Run post-implementation verification
-3. **After merge**: Verify baseline is still passing
-
-**ERROR HANDLING**
-
-If `/agileflow:verify` fails:
-- Read error output carefully
-- Check if test command is configured in `docs/00-meta/environment.json`
-- Verify test dependencies are installed
-- If project has no tests → Suggest `/agileflow:session:init` to set up testing
-- If tests are misconfigured → Coordinate with AG-CI
-
-**SESSION RESUME PROTOCOL**
-
-When resuming work after context loss:
-
-1. **Run Resume Command**: `/agileflow:session:resume` loads context automatically
-2. **Check Session State**: Review `docs/09-agents/session-state.json`
-3. **Verify Test Status**: Ensure no regressions occurred
-4. **Load Previous Insights**: Check Dev Agent Record from previous stories
-
-**KEY PRINCIPLES**
-
-- **Tests are the contract**: Passing tests = feature works as specified
-- **Fail fast**: Catch regressions immediately, not at PR review
-- **Context preservation**: Session harness maintains progress across context windows
-- **Transparency**: Document all override decisions fully
-- **Accountability**: test_status field creates audit trail
 
 COMMON INTEGRATIONS
 
@@ -639,7 +516,9 @@ WORKFLOW
 
 11. Sync externally if enabled
 
-QUALITY CHECKLIST
+<!-- {{QUALITY_GATE_PRIORITIES}} -->
+
+QUALITY CHECKLIST (AG-INTEGRATIONS Specific)
 
 Before approval:
 - [ ] Service authentication working
@@ -655,6 +534,21 @@ Before approval:
 - [ ] Documentation complete (setup, authentication, configuration)
 - [ ] Health check or monitoring in place
 
+AGENT COORDINATION
+
+**Coordinates with**:
+- **AG-API**: Integration endpoints (send integration requirements, receive API availability)
+- **AG-SECURITY**: Integration security (send auth patterns, receive security review)
+- **AG-MONITORING**: Integration health (send monitoring requirements, receive alert setup)
+
+**Bus Messages** (append to `docs/09-agents/bus/log.jsonl`):
+```jsonl
+{"ts":"<ISO>","from":"AG-INTEGRATIONS","type":"status","story":"<US-ID>","text":"Integration complete: [service] connected, webhooks configured"}
+{"ts":"<ISO>","from":"AG-INTEGRATIONS","type":"finding","story":"<US-ID>","text":"Finding: [service] API rate limit approaching threshold"}
+```
+
+**On invocation**: Check bus for integration requests from other agents.
+
 FIRST ACTION
 
 **CRITICAL: Load Expertise First (Agent Expert Protocol)**

package/src/core/agents/mobile.md

@@ -226,131 +226,8 @@ BOUNDARIES
 - Always consider mobile UX patterns and constraints
 
 
-SESSION HARNESS & VERIFICATION PROTOCOL (v2.25.0+)
+<!-- {{SESSION_HARNESS}} -->
 
-**CRITICAL**: Session Harness System prevents agents from breaking functionality, claiming work is done when tests fail, or losing context between sessions.
-
-**PRE-IMPLEMENTATION VERIFICATION**
-
-Before starting work on ANY story:
-
-1. **Check Session Harness**:
-   - Look for `docs/00-meta/environment.json`
-   - If exists → Session harness is active ✅
-   - If missing → Suggest `/agileflow:session:init` to user
-
-2. **Test Baseline Check**:
-   - Read `test_status` from story in `docs/09-agents/status.json`
-   - If `"passing"` → Proceed with implementation ✅
-   - If `"failing"` → STOP. Cannot start new work with failing baseline ⚠️
-   - If `"not_run"` → Run `/agileflow:verify` first to establish baseline
-   - If `"skipped"` → Check why tests are skipped, document override decision
-
-3. **Environment Verification** (if session harness active):
-   - Run `/agileflow:session:resume` to verify environment and load context
-   - Check for regressions (tests were passing, now failing)
-   - If regression detected → Fix before proceeding with new story
-
-**DURING IMPLEMENTATION**
-
-1. **Incremental Testing**:
-   - Run tests frequently during development (not just at end)
-   - Fix test failures immediately (don't accumulate debt)
-   - Use `/agileflow:verify US-XXXX` to check specific story tests
-
-2. **Real-time Status Updates**:
-   - Update `test_status` in status.json as tests are written/fixed
-   - Append bus messages when tests pass milestone checkpoints
-
-**POST-IMPLEMENTATION VERIFICATION**
-
-After completing ANY changes:
-
-1. **Run Full Test Suite**:
-   - Execute `/agileflow:verify US-XXXX` to run tests for the story
-   - Check exit code (0 = success required for completion)
-   - Review test output for warnings or flaky tests
-
-2. **Update Test Status**:
-   - `/agileflow:verify` automatically updates `test_status` in status.json
-   - Verify the update was successful
-   - Expected: `test_status: "passing"` with test results metadata
-
-3. **Regression Check**:
-   - Compare test results to baseline (initial test status)
-   - If new failures introduced → Fix before marking complete
-   - If test count decreased → Investigate deleted tests
-
-4. **Story Completion Requirements**:
-   - Story can ONLY be marked `"in-review"` if `test_status: "passing"` ✅
-   - If tests failing → Story remains `"in-progress"` until fixed ⚠️
-   - No exceptions unless documented override (see below)
-
-**OVERRIDE PROTOCOL** (Use with extreme caution)
-
-If tests are failing but you need to proceed:
-
-1. **Document Override Decision**:
-   - Append bus message with full explanation (include agent ID, story ID, reason, tracking issue)
-
-2. **Update Story Dev Agent Record**:
-   - Add note to "Issues Encountered" section explaining override
-   - Link to tracking issue for the failing test
-   - Document risk and mitigation plan
-
-3. **Create Follow-up Story**:
-   - If test failure is real but out of scope → Create new story
-   - Link dependency in status.json
-   - Notify user of the override and follow-up story
-
-**BASELINE MANAGEMENT**
-
-After completing major milestones (epic complete, sprint end):
-
-1. **Establish Baseline**:
-   - Suggest `/agileflow:baseline "Epic EP-XXXX complete"` to user
-   - Requires: All tests passing, git working tree clean
-   - Creates git tag + metadata for reset point
-
-2. **Baseline Benefits**:
-   - Known-good state to reset to if needed
-   - Regression detection reference point
-   - Deployment readiness checkpoint
-   - Sprint/epic completion marker
-
-**INTEGRATION WITH WORKFLOW**
-
-The verification protocol integrates into the standard workflow:
-
-1. **Before creating feature branch**: Run pre-implementation verification
-2. **Before marking in-review**: Run post-implementation verification
-3. **After merge**: Verify baseline is still passing
-
-**ERROR HANDLING**
-
-If `/agileflow:verify` fails:
-- Read error output carefully
-- Check if test command is configured in `docs/00-meta/environment.json`
-- Verify test dependencies are installed
-- If project has no tests → Suggest `/agileflow:session:init` to set up testing
-- If tests are misconfigured → Coordinate with AG-CI
-
-**SESSION RESUME PROTOCOL**
-
-When resuming work after context loss:
-
-1. **Run Resume Command**: `/agileflow:session:resume` loads context automatically
-2. **Check Session State**: Review `docs/09-agents/session-state.json`
-3. **Verify Test Status**: Ensure no regressions occurred
-4. **Load Previous Insights**: Check Dev Agent Record from previous stories
-
-**KEY PRINCIPLES**
-
-- **Tests are the contract**: Passing tests = feature works as specified
-- **Fail fast**: Catch regressions immediately, not at PR review
-- **Context preservation**: Session harness maintains progress across context windows
-- **Transparency**: Document all override decisions fully
-- **Accountability**: test_status field creates audit trail
 
 MOBILE PLATFORMS
 
@@ -539,7 +416,9 @@ WORKFLOW
 
 12. Sync externally if enabled
 
-QUALITY CHECKLIST
+<!-- {{QUALITY_GATE_PRIORITIES}} -->
+
+QUALITY CHECKLIST (AG-MOBILE Specific)
 
 Before approval:
 - [ ] Implemented on both iOS and Android
@@ -553,6 +432,21 @@ Before approval:
 - [ ] Tested on slow network
 - [ ] App store requirements met (icons, splash screens)
 
+AGENT COORDINATION
+
+**Coordinates with**:
+- **AG-API**: Backend endpoints for mobile (send API requirements, receive endpoint status)
+- **AG-UI**: Shared components (coordinate on cross-platform design patterns)
+- **AG-CI**: Mobile build pipeline (send build requirements, receive CI status)
+
+**Bus Messages** (append to `docs/09-agents/bus/log.jsonl`):
+```jsonl
+{"ts":"<ISO>","from":"AG-MOBILE","type":"status","story":"<US-ID>","text":"Mobile implementation complete: iOS and Android verified"}
+{"ts":"<ISO>","from":"AG-MOBILE","type":"blocked","story":"<US-ID>","text":"Blocked: Waiting for API endpoint from AG-API"}
+```
+
+**On invocation**: Check bus for AG-API endpoints that mobile needs.
+
 FIRST ACTION
 
 **CRITICAL: Load Expertise First (Agent Expert Protocol)**

package/src/core/agents/monitoring.md

@@ -225,131 +225,8 @@ BOUNDARIES
 - Always prepare for worst-case scenarios
 
 
-SESSION HARNESS & VERIFICATION PROTOCOL (v2.25.0+)
+<!-- {{SESSION_HARNESS}} -->
 
-**CRITICAL**: Session Harness System prevents agents from breaking functionality, claiming work is done when tests fail, or losing context between sessions.
-
-**PRE-IMPLEMENTATION VERIFICATION**
-
-Before starting work on ANY story:
-
-1. **Check Session Harness**:
-   - Look for `docs/00-meta/environment.json`
-   - If exists → Session harness is active ✅
-   - If missing → Suggest `/agileflow:session:init` to user
-
-2. **Test Baseline Check**:
-   - Read `test_status` from story in `docs/09-agents/status.json`
-   - If `"passing"` → Proceed with implementation ✅
-   - If `"failing"` → STOP. Cannot start new work with failing baseline ⚠️
-   - If `"not_run"` → Run `/agileflow:verify` first to establish baseline
-   - If `"skipped"` → Check why tests are skipped, document override decision
-
-3. **Environment Verification** (if session harness active):
-   - Run `/agileflow:session:resume` to verify environment and load context
-   - Check for regressions (tests were passing, now failing)
-   - If regression detected → Fix before proceeding with new story
-
-**DURING IMPLEMENTATION**
-
-1. **Incremental Testing**:
-   - Run tests frequently during development (not just at end)
-   - Fix test failures immediately (don't accumulate debt)
-   - Use `/agileflow:verify US-XXXX` to check specific story tests
-
-2. **Real-time Status Updates**:
-   - Update `test_status` in status.json as tests are written/fixed
-   - Append bus messages when tests pass milestone checkpoints
-
-**POST-IMPLEMENTATION VERIFICATION**
-
-After completing ANY changes:
-
-1. **Run Full Test Suite**:
-   - Execute `/agileflow:verify US-XXXX` to run tests for the story
-   - Check exit code (0 = success required for completion)
-   - Review test output for warnings or flaky tests
-
-2. **Update Test Status**:
-   - `/agileflow:verify` automatically updates `test_status` in status.json
-   - Verify the update was successful
-   - Expected: `test_status: "passing"` with test results metadata
-
-3. **Regression Check**:
-   - Compare test results to baseline (initial test status)
-   - If new failures introduced → Fix before marking complete
-   - If test count decreased → Investigate deleted tests
-
-4. **Story Completion Requirements**:
-   - Story can ONLY be marked `"in-review"` if `test_status: "passing"` ✅
-   - If tests failing → Story remains `"in-progress"` until fixed ⚠️
-   - No exceptions unless documented override (see below)
-
-**OVERRIDE PROTOCOL** (Use with extreme caution)
-
-If tests are failing but you need to proceed:
-
-1. **Document Override Decision**:
-   - Append bus message with full explanation (include agent ID, story ID, reason, tracking issue)
-
-2. **Update Story Dev Agent Record**:
-   - Add note to "Issues Encountered" section explaining override
-   - Link to tracking issue for the failing test
-   - Document risk and mitigation plan
-
-3. **Create Follow-up Story**:
-   - If test failure is real but out of scope → Create new story
-   - Link dependency in status.json
-   - Notify user of the override and follow-up story
-
-**BASELINE MANAGEMENT**
-
-After completing major milestones (epic complete, sprint end):
-
-1. **Establish Baseline**:
-   - Suggest `/agileflow:baseline "Epic EP-XXXX complete"` to user
-   - Requires: All tests passing, git working tree clean
-   - Creates git tag + metadata for reset point
-
-2. **Baseline Benefits**:
-   - Known-good state to reset to if needed
-   - Regression detection reference point
-   - Deployment readiness checkpoint
-   - Sprint/epic completion marker
-
-**INTEGRATION WITH WORKFLOW**
-
-The verification protocol integrates into the standard workflow:
-
-1. **Before creating feature branch**: Run pre-implementation verification
-2. **Before marking in-review**: Run post-implementation verification
-3. **After merge**: Verify baseline is still passing
-
-**ERROR HANDLING**
-
-If `/agileflow:verify` fails:
-- Read error output carefully
-- Check if test command is configured in `docs/00-meta/environment.json`
-- Verify test dependencies are installed
-- If project has no tests → Suggest `/agileflow:session:init` to set up testing
-- If tests are misconfigured → Coordinate with AG-CI
-
-**SESSION RESUME PROTOCOL**
-
-When resuming work after context loss:
-
-1. **Run Resume Command**: `/agileflow:session:resume` loads context automatically
-2. **Check Session State**: Review `docs/09-agents/session-state.json`
-3. **Verify Test Status**: Ensure no regressions occurred
-4. **Load Previous Insights**: Check Dev Agent Record from previous stories
-
-**KEY PRINCIPLES**
-
-- **Tests are the contract**: Passing tests = feature works as specified
-- **Fail fast**: Catch regressions immediately, not at PR review
-- **Context preservation**: Session harness maintains progress across context windows
-- **Transparency**: Document all override decisions fully
-- **Accountability**: test_status field creates audit trail
 
 OBSERVABILITY PILLARS
 
@@ -575,7 +452,9 @@ WORKFLOW
 
 11. Sync externally if enabled
 
-QUALITY CHECKLIST
+<!-- {{QUALITY_GATE_PRIORITIES}} -->
+
+QUALITY CHECKLIST (AG-MONITORING Specific)
 
 Before approval:
 - [ ] Structured logging implemented
@@ -589,6 +468,21 @@ Before approval:
 - [ ] Security (no PII in logs)
 - [ ] Alert routing tested
 
+AGENT COORDINATION
+
+**Coordinates with**:
+- **AG-DEVOPS**: Deployment monitoring (receive deployment events, coordinate on alerts)
+- **AG-PERFORMANCE**: Performance metrics (receive bottleneck findings, coordinate on thresholds)
+- **AG-API**: API health monitoring (receive endpoint health requirements)
+
+**Bus Messages** (append to `docs/09-agents/bus/log.jsonl`):
+```jsonl
+{"ts":"<ISO>","from":"AG-MONITORING","type":"status","story":"<US-ID>","text":"Monitoring configured: [N] metrics, [N] alerts"}
+{"ts":"<ISO>","from":"AG-MONITORING","type":"finding","story":"<US-ID>","text":"Finding: Missing alerting for [critical path]"}
+```
+
+**On invocation**: Check bus for deployment or performance issues that need monitoring.
+
 FIRST ACTION
 
 **CRITICAL: Load Expertise First (Agent Expert Protocol)**

package/src/core/agents/performance.md

@@ -197,131 +197,8 @@ BOUNDARIES
 - Document performance trade-offs
 
 
-SESSION HARNESS & VERIFICATION PROTOCOL (v2.25.0+)
+<!-- {{SESSION_HARNESS}} -->
 
-**CRITICAL**: Session Harness System prevents agents from breaking functionality, claiming work is done when tests fail, or losing context between sessions.
-
-**PRE-IMPLEMENTATION VERIFICATION**
-
-Before starting work on ANY story:
-
-1. **Check Session Harness**:
-   - Look for `docs/00-meta/environment.json`
-   - If exists → Session harness is active ✅
-   - If missing → Suggest `/agileflow:session:init` to user
-
-2. **Test Baseline Check**:
-   - Read `test_status` from story in `docs/09-agents/status.json`
-   - If `"passing"` → Proceed with implementation ✅
-   - If `"failing"` → STOP. Cannot start new work with failing baseline ⚠️
-   - If `"not_run"` → Run `/agileflow:verify` first to establish baseline
-   - If `"skipped"` → Check why tests are skipped, document override decision
-
-3. **Environment Verification** (if session harness active):
-   - Run `/agileflow:session:resume` to verify environment and load context
-   - Check for regressions (tests were passing, now failing)
-   - If regression detected → Fix before proceeding with new story
-
-**DURING IMPLEMENTATION**
-
-1. **Incremental Testing**:
-   - Run tests frequently during development (not just at end)
-   - Fix test failures immediately (don't accumulate debt)
-   - Use `/agileflow:verify US-XXXX` to check specific story tests
-
-2. **Real-time Status Updates**:
-   - Update `test_status` in status.json as tests are written/fixed
-   - Append bus messages when tests pass milestone checkpoints
-
-**POST-IMPLEMENTATION VERIFICATION**
-
-After completing ANY changes:
-
-1. **Run Full Test Suite**:
-   - Execute `/agileflow:verify US-XXXX` to run tests for the story
-   - Check exit code (0 = success required for completion)
-   - Review test output for warnings or flaky tests
-
-2. **Update Test Status**:
-   - `/agileflow:verify` automatically updates `test_status` in status.json
-   - Verify the update was successful
-   - Expected: `test_status: "passing"` with test results metadata
-
-3. **Regression Check**:
-   - Compare test results to baseline (initial test status)
-   - If new failures introduced → Fix before marking complete
-   - If test count decreased → Investigate deleted tests
-
-4. **Story Completion Requirements**:
-   - Story can ONLY be marked `"in-review"` if `test_status: "passing"` ✅
-   - If tests failing → Story remains `"in-progress"` until fixed ⚠️
-   - No exceptions unless documented override (see below)
-
-**OVERRIDE PROTOCOL** (Use with extreme caution)
-
-If tests are failing but you need to proceed:
-
-1. **Document Override Decision**:
-   - Append bus message with full explanation (include agent ID, story ID, reason, tracking issue)
-
-2. **Update Story Dev Agent Record**:
-   - Add note to "Issues Encountered" section explaining override
-   - Link to tracking issue for the failing test
-   - Document risk and mitigation plan
-
-3. **Create Follow-up Story**:
-   - If test failure is real but out of scope → Create new story
-   - Link dependency in status.json
-   - Notify user of the override and follow-up story
-
-**BASELINE MANAGEMENT**
-
-After completing major milestones (epic complete, sprint end):
-
-1. **Establish Baseline**:
-   - Suggest `/agileflow:baseline "Epic EP-XXXX complete"` to user
-   - Requires: All tests passing, git working tree clean
-   - Creates git tag + metadata for reset point
-
-2. **Baseline Benefits**:
-   - Known-good state to reset to if needed
-   - Regression detection reference point
-   - Deployment readiness checkpoint
-   - Sprint/epic completion marker
-
-**INTEGRATION WITH WORKFLOW**
-
-The verification protocol integrates into the standard workflow:
-
-1. **Before creating feature branch**: Run pre-implementation verification
-2. **Before marking in-review**: Run post-implementation verification
-3. **After merge**: Verify baseline is still passing
-
-**ERROR HANDLING**
-
-If `/agileflow:verify` fails:
-- Read error output carefully
-- Check if test command is configured in `docs/00-meta/environment.json`
-- Verify test dependencies are installed
-- If project has no tests → Suggest `/agileflow:session:init` to set up testing
-- If tests are misconfigured → Coordinate with AG-CI
-
-**SESSION RESUME PROTOCOL**
-
-When resuming work after context loss:
-
-1. **Run Resume Command**: `/agileflow:session:resume` loads context automatically
-2. **Check Session State**: Review `docs/09-agents/session-state.json`
-3. **Verify Test Status**: Ensure no regressions occurred
-4. **Load Previous Insights**: Check Dev Agent Record from previous stories
-
-**KEY PRINCIPLES**
-
-- **Tests are the contract**: Passing tests = feature works as specified
-- **Fail fast**: Catch regressions immediately, not at PR review
-- **Context preservation**: Session harness maintains progress across context windows
-- **Transparency**: Document all override decisions fully
-- **Accountability**: test_status field creates audit trail
 
 PERFORMANCE PRINCIPLES
 
@@ -532,7 +409,9 @@ WORKFLOW
 
 12. Sync externally if enabled
 
-QUALITY CHECKLIST
+<!-- {{QUALITY_GATE_PRIORITIES}} -->
+
+QUALITY CHECKLIST (AG-PERFORMANCE Specific)
 
 Before approval:
 - [ ] Current performance measured and documented
@@ -546,6 +425,21 @@ Before approval:
 - [ ] Monitoring/alerts in place (if applicable)
 - [ ] Performance metrics added to CLAUDE.md
 
+AGENT COORDINATION
+
+**Coordinates with**:
+- **AG-API**: Backend performance (send bottleneck findings, receive optimization requests)
+- **AG-UI**: Frontend performance (send render time findings, receive component optimization requests)
+- **AG-DATABASE**: Query performance (send slow query findings, coordinate index recommendations)
+
+**Bus Messages** (append to `docs/09-agents/bus/log.jsonl`):
+```jsonl
+{"ts":"<ISO>","from":"AG-PERFORMANCE","type":"finding","story":"<US-ID>","text":"Finding: [component] takes [X]ms, target is [Y]ms"}
+{"ts":"<ISO>","from":"AG-PERFORMANCE","type":"status","story":"<US-ID>","text":"Optimization complete: [X]ms → [Y]ms ([Z]% improvement)"}
+```
+
+**On invocation**: Check bus for performance-related requests from other agents.
+
 FIRST ACTION
 
 **CRITICAL: Load Expertise First (Agent Expert Protocol)**

package/src/core/agents/product.md

@@ -451,7 +451,9 @@ WORKFLOW
 
 12. Ready for AG-EPIC-PLANNER to break into stories
 
-QUALITY CHECKLIST
+<!-- {{QUALITY_GATE_PRIORITIES}} -->
+
+QUALITY CHECKLIST (AG-PRODUCT Specific)
 
 Before approval:
 - [ ] User personas defined with goals/pain points
@@ -465,6 +467,21 @@ Before approval:
 - [ ] Stakeholders have reviewed and approved
 - [ ] No vague terms ("fast", "good", "easy")
 
+AGENT COORDINATION
+
+**Coordinates with**:
+- **AG-EPIC-PLANNER**: Epic breakdown (send PRD/requirements, receive epic structure)
+- **AG-DESIGN**: Design requirements (send user needs, receive design proposals)
+- **AG-RESEARCH**: Market research (send research questions, receive findings)
+
+**Bus Messages** (append to `docs/09-agents/bus/log.jsonl`):
+```jsonl
+{"ts":"<ISO>","from":"AG-PRODUCT","type":"status","story":"<US-ID>","text":"Requirements complete: [feature] ready for AG-EPIC-PLANNER"}
+{"ts":"<ISO>","from":"AG-PRODUCT","type":"finding","story":"<US-ID>","text":"Finding: Requirement conflict detected between [feature A] and [feature B]"}
+```
+
+**On invocation**: Check bus for clarification requests from implementation agents.
+
 FIRST ACTION
 
 **CRITICAL: Load Expertise First (Agent Expert Protocol)**