agent-lyceum 0.4.14 → 0.5.0

package/README.md

@@ -24,23 +24,19 @@ Requires Node 20+, plus `claude` and/or `codex` on your `PATH` (already logged i
 
 | Command | What it does |
 |---|---|
-| `init [-y]` | Create the home and a global agent library (`lead`, `fe-member`, `qa-member`). Asks before creating the default path. |
-| `project add <name> --dir <repo>` | Register a project: creates `projects/<name>/project.yaml`, shared folders and `COMMON.md`. |
-| `project list` / `project remove <name> [--purge]` | List projects / unregister (keeps context unless `--purge`). |
-| `validate [-p name] [--task-file f]` | Validate the merged config and print each agent's enforcement level. Exit 1 on errors. |
-| `run ["task"] [--task-file f] [-p name]` | Give the task to the lead and run the dispatcher until done. Give *either* text or `--task-file`. |
-| `resume [run-id] [-p name]` | Continue an interrupted or failed run (each `run` is its own task; without an id, the newest run that is neither done nor running): same run dir, sessions and round count; the task is not re-sent and unread mail is picked up again. Refuses if the run is still alive. For a run that is already done it continues nothing: it prints the recorded outcome and result and exits with the code for that outcome (`0` completed, `2` partial/blocked, `1` failed; a run from before outcomes were recorded counts as an unverified `partial`, exit `2`). A run that ended idle or at `max_rounds` has no unread mail left unless you add some, so resuming it ends idle again (exit `2`). |
-| `status [-p name] [--monitor]` | Agents, unread mail, what is running right now (agent, elapsed time, message being handled), last run (task source, rounds, end reason, output tokens). Without `--monitor` it also prints the full wake-by-wake record of the latest run; `--monitor` keeps a live page open showing only the latest three wakes of each run. `--task-id <id>` prints everything about one task (every wake, its result, log directory). `--task-list [project]` lists every run of the project with its id, state, rounds and task (feed the id to `resume`). `--json` prints the same report as JSON (`schema_version: 1`, no colour, nothing else on stdout; errors go to stderr with a non-zero exit); it works with `--task-list` and `--task-id`. Text and JSON are made from the same report. |
-| `clear <run-id> [-p name] [--dry-run] [--keep-worktrees]` | Delete a task (run) by id: its run directory (state, log, result, mailboxes), its **task memory**, and its agents' git worktrees, branches and snapshot refs. Global and project (long-term) memory is never touched. It refuses, and deletes nothing, while the run is still running or while a worktree holds work that is not in your repo (uncommitted, or committed but not brought in); it lists that work. `--keep-worktrees` keeps the worktrees and their branches and still clears the rest. `--dry-run` only prints what would be deleted and kept. Symlinks are never followed out of the project home. Progress is journaled in `projects/<name>/cleanup/`, so an interrupted `clear` is finished by repeating the same command. List ids with `status --task-list`. |
-| `config show --resolved [-p name] [--json]` | Print every effective setting (global library, project file and defaults merged) and where it came from: the file and key, `default`, or `inferred from <model key>` when the runtime was recognised from `model`. Project values replace global ones; lists (`can_message`, `owns`) are replaced, not merged; relative paths are resolved against the file they were written in. |
-| `doctor [-p name] [--json]` | Check the setup without running any agent: configuration, git (for parallel runs), the project lock, and what each runtime CLI supports, read from its `--version` and `--help` (JSON output, resume, sandbox settings, effort; each is `yes`, `no` or `unknown`). Exit 1 when something the team needs is explicitly unsupported. It does not read credentials: login status is reported as unknown. `run` and `resume` do the same capability check first: they refuse to start on an explicit `no` and warn on `unknown`. A real end-to-end check against the live CLIs (a tiny task) spends tokens and is deliberately manual. |
-| `unlock [-p name] --force` | Remove the project's run lock left behind by a crashed run (only one run per project at a time). Without `--force` it only shows who holds the lock. |
-
-**Stopping a run:** Ctrl-C (or SIGTERM) cancels it cleanly: running agents get SIGTERM, then SIGKILL after 5 s (their whole process tree), unread mail is kept, the lock is released and the exit code is `130`; continue later with `agent-lyceum resume`. A second Ctrl-C quits at once. A wake-up that exceeds `wake_timeout_sec` is stopped the same way and counts as a failed attempt. Each attempt's complete stdout/stderr is written to `runs/<run-id>/mail/attempts/<attempt>/log/`; only the last 64 KiB of each stream is kept in memory.
-
-**Exit codes of `run` / `resume`:** `0` only when the lead reported `outcome: completed`; `2` for `partial` or `blocked` (also when the run went idle or hit `max_rounds` without a done); `1` for `failed` (also when the lead itself failed); `130` for `cancelled`. *Upgrading:* before this version an `idle` run exited `0` and a failed lead exited `2`; scripts that treated `0` as "the run ended" must now check for `0` as "the work was completed". Runs that ended before outcomes were recorded show as unverified (`partial`) and are not reported as a success.
-
-Without `--project`, the project is the registered one whose `dir` is the longest prefix of the current directory; if none matches the command lists the registered projects and stops.
+| `init [-y]` | Create the home and the global agent library. [details](docs/commands.md#init) |
+| `project add <name> --dir <repo>` | Register a project. [details](docs/commands.md#project-add) |
+| `project list` / `project remove <name> [--purge]` | List or unregister projects. [details](docs/commands.md#project-list-and-remove) |
+| `validate [-p name] [--task-file f]` | Validate the merged config and show each agent's enforcement level. [details](docs/commands.md#validate) |
+| `run ["task"] [--task-file f] [-p name]` | Give the task to the lead and run until done. [details](docs/commands.md#run) |
+| `resume [run-id] [-p name]` | Continue an interrupted or failed run. [details](docs/commands.md#resume) |
+| `status [-p name] [--monitor]` | Show agents, mail, the current wake-up and past runs (`--json`, `--monitor`). [details](docs/commands.md#status) |
+| `clear <run-id> [-p name] [--dry-run] [--keep-worktrees]` | Delete a run with its task memory and worktrees. [details](docs/commands.md#clear) |
+| `config show --resolved [-p name] [--json]` | Print every effective setting and where it came from. [details](docs/commands.md#config-show) |
+| `doctor [-p name] [--json]` | Check config, git, the lock and runtime CLIs without running agents. [details](docs/commands.md#doctor) |
+| `unlock [-p name] --force` | Remove the project lock a crashed run left behind. [details](docs/commands.md#unlock) |
+
+Ctrl-C cancels a run cleanly and it can be continued with `resume` ([Stopping a run](docs/commands.md#stopping-a-run)). `run` and `resume` exit `0` only when the lead reported `completed`, `2` for partial or blocked, `1` for failed, `130` for cancelled ([Exit codes](docs/commands.md#exit-codes)). Without `-p`, the project is inferred from the current directory ([Choosing the project](docs/commands.md#choosing-the-project)).
 
 ## Monitor mod (Claude Code)
 
@@ -57,7 +53,7 @@ claude --plugin-dir /path/to/agent-lyceum/plugins/status-monitor
 **Use it.**
 - **Status line:** always on once loaded (`team 讀取中…` until the first poll, `team 無法取得狀態：…` when the CLI cannot run); shows the run state, round `n/max`, output tokens, the current step and unread mail. With several projects it shows one overview line (`team 1/3 running · a ... | b ...`).
 - **Toasts:** a message pops up when a run finishes, is interrupted, or an agent's wake fails (prefixed `[project]` when several are watched). Nothing to do.
-- **`/status-monitor`:** the pane opens automatically at session start (it seats from 144 terminal columns; the status line works at any width); type the command to open it at any width. It shows, per project: the run id and state, task, progress and checklist, the agents working now and the queued mail, blocked integrations, notes and result summary, output tokens per runtime, per-agent wake statistics, the last 8 wakes. Each task (a project's current run and its last 3 past runs) is a tab; click a tab to switch. It refreshes with the polling interval while open. Click **關閉** (Close) to dismiss it (Esc does not close it).
+- **`/status-monitor`:** type it to open (or, if already open, close) the pane. It is off at session start unless `autoOpen` is set. In the **fullscreen layout** (`"tui": "fullscreen"` in `~/.claude/settings.json`, restart the session to apply; `/tui fullscreen` does the same) from 110 terminal columns it docks on the right at half the terminal width, and tabs and **關閉** (Close) can be clicked. Otherwise it shows above the prompt; the layout is fixed when the session starts, so a session started on the main screen stays that way. Keyboard (works in both): `x` closes, `1`-`9` or Tab/Enter switch task, Esc returns to the prompt, running the command again also closes. It shows, per project: the run id and state, task, progress and checklist, the agents working now and the queued mail, blocked integrations, notes and result summary, output tokens per runtime, per-agent wake statistics, the last 8 wakes. Each task (a project's current run and its last 3 past runs) is a tab. It refreshes with the polling interval while open.
 
 **Configure it.** In `~/.claude/settings.json` under `pluginConfigs."status-monitor@inline"` (`options`):
 
@@ -66,6 +62,7 @@ claude --plugin-dir /path/to/agent-lyceum/plugins/status-monitor
 | `command` | CLI to run, split on spaces, e.g. `node /path/to/agent-lyceum/dist/cli.js` | `agent-lyceum` |
 | `project` | Registered project name(s) (`-p`); comma-separate to watch several; empty infers from the session's directory | empty |
 | `intervalSeconds` | How often status is polled | `1` |
+| `autoOpen` | Open the pane when a session starts (it seats only from 144 columns when opened unasked) | `false` |
 
 Changes take effect on the next session start. If the pane shows `無法取得狀態：...`, the `command` could not run (usually `dist/cli.js` was not built) or the project name is not registered.
 
@@ -89,7 +86,7 @@ Changes take effect on the next session start. If the pane shows `無法取得
 # project.yaml
 dir: ~/code/web-app
 team: { lead: lead }
-dispatcher: { max_rounds: 30, max_parallel: 1, wake_timeout_sec: 600, retry: 1, strict: false, workspace_mode: auto }
+dispatcher: { max_rounds: 30, max_parallel: 1, wake_timeout_sec: 600, retry: 1, strict: false, workspace_mode: auto, log_max_bytes: 8388608 }
 agents:
   lead:      { resume: true, can_message: all, can_edit_agent_md: true }
   fe-member: { runtime: codex, can_message: [lead], owns: ["src/web/**"] }
@@ -125,7 +122,7 @@ Enforcement is layered because no single mechanism is complete:
 
 - **Claude Code**: per-run `--settings` with `Edit(...)` rules **plus** the OS sandbox (`allowWrite`/`denyWrite`, `allowUnsandboxedCommands: false`). Without the sandbox, `python -c` and similar bypass Edit rules, so the sandbox is required for the `os` level.
 - **Codex**: `-s workspace-write` with `-c sandbox_workspace_write.writable_roots=[...]` (OS-enforced). Codex cannot forbid a single file inside the repo, so repo `CLAUDE.md`/`AGENTS.md` are protected by **post-hoc detection** only.
-- **All runtimes**: protected files are hashed before the run; after each wake-up unauthorized changes are reverted, logged, and reported to the lead.
+- **All runtimes**: protected files are hashed before the run; after each wake-up unauthorized changes are reverted, logged, and reported to the lead; what was written is kept in `runs/<run-id>/violations/` first.
 
 `validate` and `run` print every agent's level per category (`os`, `tool-rules`, `post-hoc`, `prompt-only`) and the paths it can write outside the repo. With `dispatcher.strict: true`, a run is refused unless memory, `AGENT.md` and other agents' context are OS-enforced.
 

package/README.zh-TW.md

@@ -24,23 +24,19 @@ npx agent-lyceum status
 
 | 指令 | 功能 |
 |---|---|
-| `init [-y]` | 建立 home 與全域 agent 庫（`lead`、`fe-member`、`qa-member`）。建立預設路徑前會先詢問。 |
-| `project add <name> --dir <repo>` | 註冊專案：建立 `projects/<name>/project.yaml`、共用資料夾與 `COMMON.md`。 |
-| `project list` / `project remove <name> [--purge]` | 列出專案／取消註冊（除非加 `--purge`，否則保留 context）。 |
-| `validate [-p name] [--task-file f]` | 驗證合併後的設定，並印出每個 agent 的防護等級。有錯誤時 exit 1。 |
-| `run ["task"] [--task-file f] [-p name]` | 把任務交給 lead，並執行 dispatcher 直到完成。任務文字與 `--task-file` 擇一提供。 |
-| `resume [run-id] [-p name]` | 接續被中斷或失敗的 run（每次 `run` 都是獨立任務；不指定 id 時接續最新一個尚未結束且未在執行的 run，指定 id 則接續該任務）：沿用同一個 run 目錄、session 與輪數，不會重送任務，未讀信件會重新處理。run 仍在執行時會拒絕。對已完成（done）的 run 不會繼續任何工作：只印出已記錄的結果狀態與內容，並以該結果對應的碼結束（`0` completed、`2` partial／blocked、`1` failed；在記錄結果狀態之前就結束的舊 run 視為未驗證的 `partial`，回傳 `2`）。因閒置或達 `max_rounds` 而結束的 run，除非補上新信件，否則已沒有未讀信件，接續後會再次以閒置結束（回傳 `2`）。 |
-| `status [-p name] [--monitor]` | 顯示 agent、未讀信件、目前正在執行的 agent（耗時、處理中的信件）、上次執行（任務來源、輪數、結束原因、output token 數）。不帶 `--monitor` 時會一併印出最新 run 的完整 wake 紀錄；`--monitor` 會常駐並持續更新，每個 run 只顯示最新三筆 wake。`--task-id <id>` 印出單一任務的完整內容（每次 wake、結果、log 目錄）。`--task-list [project]` 列出專案所有任務（run）的 id、狀態、輪數與任務內容，id 可直接給 `resume` 使用。加上 `--json` 會把同一份報告以 JSON 輸出（`schema_version: 1`、無顏色，stdout 只有 JSON；錯誤走 stderr 並以非零 exit code 結束），可搭配 `--task-list`、`--task-id`。文字與 JSON 由同一份報告產生。 |
-| `clear <run-id> [-p name] [--dry-run] [--keep-worktrees]` | 依 id 刪除一個任務（run）：它的 run 目錄（狀態、log、結果、信箱）、**任務記憶**，以及各 agent 的 git worktree、branch 與快照 ref。全域與專案層（長期）記憶一律不會動。run 仍在執行，或有 worktree 內的成果不在你的 repo 裡（未提交，或已提交但尚未整合進來）時會拒絕且什麼都不刪，並列出那些成果。`--keep-worktrees` 會保留 worktree 與 branch，其餘照樣清除。`--dry-run` 只列出會刪除與會保留的項目。絕不會順著 symlink 刪到專案 home 之外。進度會記在 `projects/<name>/cleanup/` 的 journal，所以中斷後重跑同一個指令即可完成。id 可用 `status --task-list` 查。 |
-| `config show --resolved [-p name] [--json]` | 印出每一項生效的設定（全域 agent 庫、專案檔與預設值合併後的結果）與它的來源：檔案與 key、`default`，或在 runtime 是由 `model` 辨識出來時顯示 `inferred from <model 的 key>`。專案的值覆蓋全域；清單（`can_message`、`owns`）是整個取代而非合併；相對路徑以寫它的那個檔案為基準解析。 |
-| `doctor [-p name] [--json]` | 在不執行任何 agent 的前提下檢查環境：設定、git（平行 run 需要）、專案鎖，以及各 runtime CLI 支援什麼（從 `--version` 與 `--help` 讀取：JSON 輸出、resume、sandbox 設定、effort，每項都是 `yes`、`no` 或 `unknown`）。只要團隊需要的功能被明確判定不支援就 exit 1。它不讀取憑證，登入狀態會回報為 unknown。`run` 與 `resume` 啟動前會先做同樣的能力檢查：明確 `no` 就拒絕啟動，`unknown` 則警告。要對真實 CLI 做端到端驗證（跑一個很小的任務）會花 token，刻意保留為手動。 |
-| `unlock [-p name] --force` | 移除當機的 run 留下的專案鎖（同一專案同時只能有一個 run）。不加 `--force` 只會顯示鎖的持有者。 |
-
-**中止 run：** Ctrl-C（或 SIGTERM）會乾淨地取消 run：執行中的 agent 先收到 SIGTERM，5 秒後 SIGKILL（連同整個子程序樹），未讀信件保留、專案鎖釋放，exit code 為 `130`；之後可用 `agent-lyceum resume` 接續。再按一次 Ctrl-C 會立刻結束。超過 `wake_timeout_sec` 的喚醒也以同樣方式停止，並算作一次失敗的嘗試。每次嘗試完整的 stdout／stderr 都寫在 `runs/<run-id>/mail/attempts/<attempt>/log/`，記憶體中每個串流只保留最後 64 KiB。
-
-**`run`／`resume` 的 exit code：** `0` 只代表 lead 回報 `outcome: completed`；`2` 代表 `partial` 或 `blocked`（run 閒置或達到 `max_rounds` 而沒有 done 也算）；`1` 代表 `failed`（lead 本身失敗也算）；`130` 代表 `cancelled`。*升級注意：* 舊版 `idle` 結束會回傳 `0`、lead 失敗回傳 `2`；原本把 `0` 當成「run 結束了」的腳本，現在 `0` 的意思是「工作確實完成」。在記錄結果狀態之前就結束的舊 run 會顯示為「未驗證」（`partial`），不會被當成成功。
-
-未指定 `--project` 時，會選用 `dir` 為目前目錄最長前綴的已註冊專案；若沒有符合的專案，指令會列出已註冊專案後停止。
+| `init [-y]` | 建立 home 與全域 agent 庫。 [詳細](docs/commands.zh-TW.md#init) |
+| `project add <name> --dir <repo>` | 註冊專案。 [詳細](docs/commands.zh-TW.md#project-add) |
+| `project list` / `project remove <name> [--purge]` | 列出或取消註冊專案。 [詳細](docs/commands.zh-TW.md#project-list-and-remove) |
+| `validate [-p name] [--task-file f]` | 驗證設定並顯示每個 agent 的防護等級。 [詳細](docs/commands.zh-TW.md#validate) |
+| `run ["task"] [--task-file f] [-p name]` | 把任務交給 lead 並執行到結束。 [詳細](docs/commands.zh-TW.md#run) |
+| `resume [run-id] [-p name]` | 接續被中斷或失敗的 run。 [詳細](docs/commands.zh-TW.md#resume) |
+| `status [-p name] [--monitor]` | 顯示 agent、信件、目前執行與歷次 run（支援 `--json`、`--monitor`）。 [詳細](docs/commands.zh-TW.md#status) |
+| `clear <run-id> [-p name] [--dry-run] [--keep-worktrees]` | 刪除 run 與其任務記憶、worktree。 [詳細](docs/commands.zh-TW.md#clear) |
+| `config show --resolved [-p name] [--json]` | 印出每項生效設定與其來源。 [詳細](docs/commands.zh-TW.md#config-show) |
+| `doctor [-p name] [--json]` | 不執行 agent，檢查設定、git、鎖與 runtime CLI。 [詳細](docs/commands.zh-TW.md#doctor) |
+| `unlock [-p name] --force` | 移除當機 run 留下的專案鎖。 [詳細](docs/commands.zh-TW.md#unlock) |
+
+Ctrl-C 會乾淨地取消 run，之後可用 `resume` 接續（[中止 run](docs/commands.zh-TW.md#中止-run)）。`run`／`resume` 只有在 lead 回報 `completed` 時才 exit `0`；`partial`／`blocked` 為 `2`，`failed` 為 `1`，取消為 `130`（[退出碼](docs/commands.zh-TW.md#退出碼)）。未指定 `-p` 時，專案由目前目錄推斷（[選擇專案](docs/commands.zh-TW.md#選擇專案)）。
 
 ## 監控 mod（Claude Code）
 
@@ -57,7 +53,7 @@ claude --plugin-dir /path/to/agent-lyceum/plugins/status-monitor
 **操作。**
 - **狀態列：** 載入後常駐（第一次輪詢前顯示 `team 讀取中…`，CLI 跑不起來時顯示 `team 無法取得狀態：…`），顯示執行狀態、輪數 `n/max`、output tokens、目前步驟與未讀信件。監看多個專案時顯示一行總覽（`team 1/3 執行中 · a ... | b ...`）。
 - **通知：** 執行完成、被中斷或某個 agent 喚醒失敗時會跳出訊息（監看多個專案時前面加 `[專案名]`），不需要任何操作。
-- **`/status-monitor`：** session 啟動時面板會自動開啟（終端寬度需 144 欄以上才會顯示，狀態列不受影響）；也可輸入此指令在任何寬度開啟。每個專案顯示：執行 id 與狀態、任務、進度與清單、正在工作的 agent 與排隊中的信件、受阻的整合、備註與結果摘要、各 runtime 的 output tokens、各 agent 的喚醒統計、最近 8 次喚醒。每個任務（專案目前的執行與最近 3 次過往執行）是一個分頁，點分頁即可切換。面板開著時會依輪詢間隔自動更新，只能點 **關閉** 收起（Esc 不會關閉）。
+- **`/status-monitor`：** 輸入即開啟面板（已開著則關閉）。session 啟動時預設不開，除非設定 `autoOpen`。在 **fullscreen 版面**（`~/.claude/settings.json` 設 `"tui": "fullscreen"` 後重開 session；`/tui fullscreen` 效果相同）且終端寬度 110 欄以上時，面板會靠右 dock 在終端寬度的一半，分頁與 **關閉** 都可以用滑鼠點。否則顯示在輸入框上方；版面在 session 啟動時就固定，從主畫面啟動的 session 不會變。鍵盤操作兩種版面都能用：`x` 關閉，`1`-`9` 或 Tab/Enter 切換任務，Esc 回到輸入框，再執行一次指令也會關閉。每個專案顯示：執行 id 與狀態、任務、進度與清單、正在工作的 agent 與排隊中的信件、受阻的整合、備註與結果摘要、各 runtime 的 output tokens、各 agent 的喚醒統計、最近 8 次喚醒。每個任務（專案目前的執行與最近 3 次過往執行）是一個分頁。面板開著時會依輪詢間隔自動更新。
 
 **設定。** 在 `~/.claude/settings.json` 的 `pluginConfigs."status-monitor@inline"`（`options`）：
 
@@ -66,6 +62,7 @@ claude --plugin-dir /path/to/agent-lyceum/plugins/status-monitor
 | `command` | 要執行的 CLI，以空白分隔，例如 `node /path/to/agent-lyceum/dist/cli.js` | `agent-lyceum` |
 | `project` | 已註冊的專案名稱（`-p`）；用逗號分隔可同時監看多個；留空則依 session 所在目錄推斷 | 空 |
 | `intervalSeconds` | 輪詢狀態的間隔（秒） | `1` |
+| `autoOpen` | session 啟動時自動開啟面板（未經操作開啟時，終端需 144 欄以上才會顯示） | `false` |
 
 設定變更要等下次啟動 session 才生效。面板若顯示 `無法取得狀態：...`，通常是 `command` 跑不起來（多半是還沒 build `dist/cli.js`），或專案名稱沒有註冊。
 
@@ -90,7 +87,7 @@ claude --plugin-dir /path/to/agent-lyceum/plugins/status-monitor
 # project.yaml
 dir: ~/code/web-app
 team: { lead: lead }
-dispatcher: { max_rounds: 30, max_parallel: 1, wake_timeout_sec: 600, retry: 1, strict: false, workspace_mode: auto }
+dispatcher: { max_rounds: 30, max_parallel: 1, wake_timeout_sec: 600, retry: 1, strict: false, workspace_mode: auto, log_max_bytes: 8388608 }
 agents:
   lead:      { resume: true, can_message: all, can_edit_agent_md: true }
   fe-member: { runtime: codex, can_message: [lead], owns: ["src/web/**"] }
@@ -126,7 +123,7 @@ Agent 欄位：`runtime`（`claude-code`|`codex`；若 `model` 可辨識則可
 
 - **Claude Code**：每次執行帶入 `--settings`，內含 `Edit(...)` 規則，**加上** OS 沙箱（`allowWrite`/`denyWrite`、`allowUnsandboxedCommands: false`）。沒有沙箱時，`python -c` 之類的做法能繞過 Edit 規則，因此 `os` 等級必須啟用沙箱。
 - **Codex**：`-s workspace-write` 搭配 `-c sandbox_workspace_write.writable_roots=[...]`（由 OS 強制）。Codex 無法禁止 repo 內的單一檔案，所以 repo 的 `CLAUDE.md`/`AGENTS.md` 只能靠**事後偵測**保護。
-- **所有 runtime**：執行前會對受保護檔案做雜湊；每次喚醒後，未經授權的變更會被還原、記錄，並通報 lead。
+- **所有 runtime**：執行前會對受保護檔案做雜湊；每次喚醒後，未經授權的變更會被還原、記錄，並通報 lead；被寫入的內容會先留存在 `runs/<run-id>/violations/`。
 
 `validate` 與 `run` 會依類別（`os`、`tool-rules`、`post-hoc`、`prompt-only`）印出每個 agent 的防護等級，以及它能寫入 repo 之外的哪些路徑。設定 `dispatcher.strict: true` 時，除非記憶、`AGENT.md` 與其他 agent 的 context 都由 OS 強制保護，否則拒絕執行。
 

package/dist/assert.d.ts

@@ -0,0 +1,2 @@
+/** For values the program's own invariants guarantee (never for user input): fail loudly instead of `value!`. */
+export declare function must<T>(value: T | undefined | null, what: string): T;

package/dist/assert.js

@@ -0,0 +1,6 @@
+/** For values the program's own invariants guarantee (never for user input): fail loudly instead of `value!`. */
+export function must(value, what) {
+    if (value === undefined || value === null)
+        throw new Error(`internal: ${what} is missing`);
+    return value;
+}

package/dist/cli.js

@@ -15,6 +15,7 @@ import { addProject, initHome, removeProject } from "./scaffold.js";
 import { buildStatusReport, buildTaskListReport, formatMonitor, formatRunDetail, formatStatusWithLog, formatTaskList, latestUnfinishedRun, runIsAlive } from "./status.js";
 import { prepareTask, readTaskFile } from "./task.js";
 import { formatEnforcement, validateProject } from "./validate.js";
+import { must } from "./assert.js";
 const program = new Command();
 program
     .name("agent-lyceum")
@@ -170,7 +171,11 @@ function cancelOnSignals() {
     const onTerm = handler("Terminated");
     process.on("SIGINT", onInt);
     process.on("SIGTERM", onTerm);
-    return { signal: ac.signal, dispose: () => (process.off("SIGINT", onInt), process.off("SIGTERM", onTerm)) };
+    return { signal: ac.signal, dispose: () => {
+            process.off("SIGINT", onInt);
+            process.off("SIGTERM", onTerm);
+        },
+    };
 }
 function reportRun(summary, runDir) {
     console.log(`\nRun ${summary.runId} ended: ${summary.endReason}, outcome: ${summary.outcome}, after ${summary.rounds} round(s). Logs: ${path.join(runDir, "log.jsonl")}`);
@@ -354,7 +359,7 @@ configCmd
         const keys = Object.keys(sources).filter((k) => values[k] !== undefined);
         const w = Math.max(...keys.map((k) => `${k} = ${show(values[k])}`.length));
         for (const k of keys)
-            console.log(`${`${k} = ${show(values[k])}`.padEnd(w)}   ${where(sources[k])}`);
+            console.log(`${`${k} = ${show(values[k])}`.padEnd(w)}   ${where(must(sources[k], `source of ${k}`))}`);
     }
     catch (e) {
         fail(e instanceof ConfigError ? e.message : e.message);

package/dist/config.d.ts

@@ -44,45 +44,46 @@ export declare function loadGlobal(home: string): {
     agents: Record<string, {
         runtime?: "claude-code" | "codex" | undefined;
         model?: string | undefined;
-        effort?: "minimal" | "low" | "medium" | "high" | "xhigh" | "max" | undefined;
+        effort?: "high" | "low" | "max" | "medium" | "minimal" | "xhigh" | undefined;
         agent_md?: string | undefined;
         memory?: {
             global?: string | undefined;
             project?: string | undefined;
         } | undefined;
         resume?: boolean | undefined;
-        can_message?: string[] | "all" | undefined;
+        can_message?: "all" | string[] | undefined;
         can_edit_agent_md?: boolean | undefined;
         owns?: string[] | undefined;
     }>;
 };
 export declare function loadProjectRaw(home: string, name: string): {
+    dir: string;
+    team: {
+        lead: string;
+    };
+    dispatcher: {
+        max_rounds?: number | undefined;
+        max_parallel?: number | undefined;
+        wake_timeout_sec?: number | undefined;
+        retry?: number | undefined;
+        strict?: boolean | undefined;
+        workspace_mode?: "auto" | "shared" | "worktree" | undefined;
+        log_max_bytes?: number | undefined;
+    };
     agents: Record<string, {
         runtime?: "claude-code" | "codex" | undefined;
         model?: string | undefined;
-        effort?: "minimal" | "low" | "medium" | "high" | "xhigh" | "max" | undefined;
+        effort?: "high" | "low" | "max" | "medium" | "minimal" | "xhigh" | undefined;
         agent_md?: string | undefined;
         memory?: {
             global?: string | undefined;
             project?: string | undefined;
         } | undefined;
         resume?: boolean | undefined;
-        can_message?: string[] | "all" | undefined;
+        can_message?: "all" | string[] | undefined;
         can_edit_agent_md?: boolean | undefined;
         owns?: string[] | undefined;
     }>;
-    dir: string;
-    team: {
-        lead: string;
-    };
-    dispatcher: {
-        strict?: boolean | undefined;
-        max_rounds?: number | undefined;
-        max_parallel?: number | undefined;
-        wake_timeout_sec?: number | undefined;
-        retry?: number | undefined;
-        workspace_mode?: "shared" | "auto" | "worktree" | undefined;
-    };
 };
 export declare function resolveProject(home: string, name: string): ResolvedProject;
 /** Registered projects: name -> repo dir (best effort; skips broken configs). */

package/dist/config.js

@@ -112,12 +112,20 @@ export function resolveProject(home, name) {
         let runtime = pl.runtime;
         if (runtime !== undefined)
             sources.runtime = "project";
-        else if ((runtime = inferRuntime(pl.model)))
-            sources.runtime = "model";
-        else if ((runtime = gl.runtime))
-            sources.runtime = "global";
-        else if ((runtime = inferRuntime(gl.model)))
-            sources.runtime = "model";
+        else {
+            const candidates = [
+                [inferRuntime(pl.model), "model"],
+                [gl.runtime, "global"],
+                [inferRuntime(gl.model), "model"],
+            ];
+            for (const [r, from] of candidates) {
+                if (!r)
+                    continue;
+                runtime = r;
+                sources.runtime = from;
+                break;
+            }
+        }
         const isLead = agentName === lead;
         const resume = pick("resume");
         const canMessage = pick("can_message");

package/dist/dispatcher.d.ts

@@ -1,37 +1,6 @@
-import { type Invoker } from "./adapters/index.js";
-import type { ResolvedProject } from "./config.js";
-import type { RunOutcome } from "./schema.js";
-import { newRunId, type EndReason, type RunState } from "./run-store.js";
-import { type PreparedTask } from "./task.js";
+import { type RunOptions, type RunSummary } from "./run-session.js";
+import { newRunId } from "./run-store.js";
 export { newRunId };
 export type { ActiveWake, EndReason, RunState, SentTopic, WakeRecord, WakeTopic } from "./run-store.js";
-export declare const RESULT_FILE = "result.md";
-/** How many times a non-conforming `done` goes back to the lead before it is accepted as `partial`. */
-export declare const MAX_DONE_REJECTIONS = 2;
-export interface RunSummary {
-    runId: string;
-    runDir: string;
-    rounds: number;
-    endReason: EndReason;
-    /** How the work turned out; only "completed" means success. */
-    outcome: RunOutcome;
-    outcomeNote?: string;
-    verification?: string;
-    doneMessage?: {
-        subject: string;
-        body: string;
-    };
-}
-export interface RunOptions {
-    project: ResolvedProject;
-    /** The task for a new run; omit when resuming. */
-    task?: PreparedTask;
-    /** Continue this earlier run (same run dir, sessions and counters) instead of starting a new one. */
-    resume?: RunState;
-    runDir: string;
-    invoker?: Invoker;
-    /** Stop the run when this fires: running agents are killed, unread mail is kept, the run ends `cancelled` and can be resumed. */
-    signal?: AbortSignal;
-    log?: (line: string) => void;
-}
+export { MAX_DONE_REJECTIONS, RESULT_FILE, type RunOptions, type RunSummary } from "./run-session.js";
 export declare function runTeam(opts: RunOptions): Promise<RunSummary>;