aes70 1.3.8 → 1.4.0

package/src/controller/ControlClasses/OcaNetworkSignalChannel.d.ts

@@ -1,17 +1,23 @@
-import { RemoteDevice } from '../remote_device';
-import { OcaWorker } from './OcaWorker';
-
-import { PropertyEvent } from '../property_event';
 import { OcaNetworkMediaSourceOrSink } from '../../types/OcaNetworkMediaSourceOrSink';
 import { OcaNetworkSignalChannelStatus } from '../../types/OcaNetworkSignalChannelStatus';
+import { PropertyEvent } from '../property_event';
+import { RemoteDevice } from '../remote_device';
+import { OcaWorker } from './OcaWorker';
 
 /**
- *  **DEPRECATED CLASS**   *Replaced by features of the*  **OcaMediaSinkConnector **  *and*  **OcaMediaSourceConnector **  *datatypes in version 3 of Connection Management (CM3)*  Worker that allows connection of one or more internal signal paths to a network signal channel.
+ * **DEPRECATED CLASS** *Replaced by features of the* **OcaMediaSinkConnector
+ * ***and* **OcaMediaSourceConnector ***datatypes in version 3 of Connection
+ * Management (CM3)* Worker that allows connection of one or more internal
+ * signal paths to a network signal channel.
  *
- *  - For stream-oriented media connection management such as used by AVB, this worker will be linked to an  **OcaStreamConnector**  object and to the appropriate  **OcaStreamNetwork** object.
+ *  - For stream-oriented media connection management such as used by AVB, this
+ *    worker will be linked to an **OcaStreamConnector** object and to the
+ *    appropriate **OcaStreamNetwork** object.
  *
+ *  - For channel-oriented media connection management, such as the Dante
+ *    name-based routing mechanism, this worker will be linked only to the
+ *    **OcaStreamNetwork** object.
  *
- *  - For channel-oriented media connection management, such as the Dante name-based routing mechanism, this worker will be linked only to the  **OcaStreamNetwork** object.
  *
  * @extends OcaWorker
  * @class OcaNetworkSignalChannel
@@ -50,11 +56,12 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   constructor(objectNumber: number, device: RemoteDevice);
 
   /**
-   * Adds the object number of the stream connector object to which this media port belongs, and specifies on what index of the stream connector this channel can be found. Return status indicates success of operation.
+   * Adds the object number of the stream connector object to which this media
+   * port belongs, and specifies on what index of the stream connector this
+   * channel can be found. Return status indicates success of operation.
    *
    * @method OcaNetworkSignalChannel#AddToConnector
    * @param {number} Connector
-   *
    * @param {number} Index
    *
    * @returns {Promise<void>}
@@ -62,7 +69,9 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   AddToConnector(Connector: number, Index: number): Promise<void>;
 
   /**
-   * Gets the object number of the stream connector object to which this media port belongs, if any. If port does not belong to a stream connector, returns zero. Return status indicates success of operation.
+   * Gets the object number of the stream connector object to which this media
+   * port belongs, if any. If port does not belong to a stream connector,
+   * returns zero. Return status indicates success of operation.
    *
    * @method OcaNetworkSignalChannel#GetConnectorPins
    * @returns {Promise<Map<number, number>>}
@@ -71,7 +80,8 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   GetConnectorPins(): Promise<Map<number, number>>;
 
   /**
-   * Gets the value of the IDAdvertised property. Return status indicates success of operation.
+   * Gets the value of the IDAdvertised property. Return status indicates
+   * success of operation.
    *
    * @method OcaNetworkSignalChannel#GetIDAdvertised
    * @returns {Promise<Uint8Array>}
@@ -80,7 +90,8 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   GetIDAdvertised(): Promise<Uint8Array>;
 
   /**
-   * Gets the object number of the stream network object to which this media port belongs. Return status indicates success of operation.
+   * Gets the object number of the stream network object to which this media
+   * port belongs. Return status indicates success of operation.
    *
    * @method OcaNetworkSignalChannel#GetNetwork
    * @returns {Promise<number>}
@@ -89,7 +100,10 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   GetNetwork(): Promise<number>;
 
   /**
-   * Gets the remote channel ID to which this channel is connected. Empty if the channel is not connected (at least not directly to another channel). For stream-oriented connection management this functionality is not used (i.e. the remote channel ID will always be empty).
+   * Gets the remote channel ID to which this channel is connected. Empty if the
+   * channel is not connected (at least not directly to another channel). For
+   * stream-oriented connection management this functionality is not used (i.e.
+   * the remote channel ID will always be empty).
    *
    * @method OcaNetworkSignalChannel#GetRemoteChannelID
    * @returns {Promise<Uint8Array>}
@@ -98,7 +112,8 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   GetRemoteChannelID(): Promise<Uint8Array>;
 
   /**
-   * Gets the value of the SourceOrSink property. Return status indicates success of operation.
+   * Gets the value of the SourceOrSink property. Return status indicates
+   * success of operation.
    *
    * @method OcaNetworkSignalChannel#GetSourceOrSink
    * @returns {Promise<OcaNetworkMediaSourceOrSink>}
@@ -107,7 +122,8 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   GetSourceOrSink(): Promise<OcaNetworkMediaSourceOrSink>;
 
   /**
-   * Gets the value of the Status property. Return status indicates success of operation.
+   * Gets the value of the Status property. Return status indicates success of
+   * operation.
    *
    * @method OcaNetworkSignalChannel#GetStatus
    * @returns {Promise<OcaNetworkSignalChannelStatus>}
@@ -116,7 +132,8 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   GetStatus(): Promise<OcaNetworkSignalChannelStatus>;
 
   /**
-   * Removes this channel from the passed stream connector. Return status indicates success of operation.
+   * Removes this channel from the passed stream connector. Return status
+   * indicates success of operation.
    *
    * @method OcaNetworkSignalChannel#RemoveFromConnector
    * @param {number} Connector
@@ -126,7 +143,8 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   RemoveFromConnector(Connector: number): Promise<void>;
 
   /**
-   * Sets the value of the IDAdvertised property. Return status indicates success of operation.
+   * Sets the value of the IDAdvertised property. Return status indicates
+   * success of operation.
    *
    * @method OcaNetworkSignalChannel#SetIDAdvertised
    * @param {Uint8Array} IDAdvertised
@@ -136,7 +154,9 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   SetIDAdvertised(IDAdvertised: Uint8Array): Promise<void>;
 
   /**
-   * Sets the object number of the stream network object to which this media port belongs. Return status indicates success of operation. Only implemented for reconfigurable devices.
+   * Sets the object number of the stream network object to which this media
+   * port belongs. Return status indicates success of operation. Only
+   * implemented for reconfigurable devices.
    *
    * @method OcaNetworkSignalChannel#SetNetwork
    * @param {number} Network
@@ -146,7 +166,11 @@ export declare class OcaNetworkSignalChannel extends OcaWorker {
   SetNetwork(Network: number): Promise<void>;
 
   /**
-   * Sets the remote channel ID to which this channel must be connected. Only used for channel-oriented connection management. For stream-oriented connection management this method is not used. Clearing the remote channel ID (i.e. tearing down the connection) can be done by passing an empty remote channel ID as parameter.
+   * Sets the remote channel ID to which this channel must be connected. Only
+   * used for channel-oriented connection management. For stream-oriented
+   * connection management this method is not used. Clearing the remote channel
+   * ID (i.e. tearing down the connection) can be done by passing an empty
+   * remote channel ID as parameter.
    *
    * @method OcaNetworkSignalChannel#SetRemoteChannelID
    * @param {Uint8Array} RemoteChannelID

package/src/controller/ControlClasses/OcaNetworkSignalChannel.js

@@ -1,19 +1,26 @@
-import { make_control_class } from '../make_control_class.js';
-import { OcaWorker } from './OcaWorker.js';
 import { OcaBlob } from '../../OCP1/OcaBlob.js';
 import { OcaMap } from '../../OCP1/OcaMap.js';
 import { OcaNetworkMediaSourceOrSink } from '../../OCP1/OcaNetworkMediaSourceOrSink.js';
 import { OcaNetworkSignalChannelStatus } from '../../OCP1/OcaNetworkSignalChannelStatus.js';
 import { OcaUint16 } from '../../OCP1/OcaUint16.js';
 import { OcaUint32 } from '../../OCP1/OcaUint32.js';
+import { make_control_class } from '../make_control_class.js';
+import { OcaWorker } from './OcaWorker.js';
 
 /**
- *  **DEPRECATED CLASS**   *Replaced by features of the*  **OcaMediaSinkConnector **  *and*  **OcaMediaSourceConnector **  *datatypes in version 3 of Connection Management (CM3)*  Worker that allows connection of one or more internal signal paths to a network signal channel.
+ * **DEPRECATED CLASS** *Replaced by features of the* **OcaMediaSinkConnector
+ * ***and* **OcaMediaSourceConnector ***datatypes in version 3 of Connection
+ * Management (CM3)* Worker that allows connection of one or more internal
+ * signal paths to a network signal channel.
  *
- *  - For stream-oriented media connection management such as used by AVB, this worker will be linked to an  **OcaStreamConnector**  object and to the appropriate  **OcaStreamNetwork** object.
+ *  - For stream-oriented media connection management such as used by AVB, this
+ *    worker will be linked to an **OcaStreamConnector** object and to the
+ *    appropriate **OcaStreamNetwork** object.
  *
+ *  - For channel-oriented media connection management, such as the Dante
+ *    name-based routing mechanism, this worker will be linked only to the
+ *    **OcaStreamNetwork** object.
  *
- *  - For channel-oriented media connection management, such as the Dante name-based routing mechanism, this worker will be linked only to the  **OcaStreamNetwork** object.
  *
  * @extends OcaWorker
  * @class OcaNetworkSignalChannel
@@ -49,59 +56,70 @@ export const OcaNetworkSignalChannel = make_control_class(
 );
 
 /**
- * Adds the object number of the stream connector object to which this media port belongs, and specifies on what index of the stream connector this channel can be found. Return status indicates success of operation.
+ * Adds the object number of the stream connector object to which this media
+ * port belongs, and specifies on what index of the stream connector this
+ * channel can be found. Return status indicates success of operation.
  *
  * @method OcaNetworkSignalChannel#AddToConnector
  * @param {number} Connector
- *
  * @param {number} Index
  *
  * @returns {Promise<void>}
  */
 /**
- * Gets the object number of the stream connector object to which this media port belongs, if any. If port does not belong to a stream connector, returns zero. Return status indicates success of operation.
+ * Gets the object number of the stream connector object to which this media
+ * port belongs, if any. If port does not belong to a stream connector, returns
+ * zero. Return status indicates success of operation.
  *
  * @method OcaNetworkSignalChannel#GetConnectorPins
  * @returns {Promise<Map<number, number>>}
  *   A promise which resolves to a single value of type ``Map<number, number>``.
  */
 /**
- * Gets the value of the IDAdvertised property. Return status indicates success of operation.
+ * Gets the value of the IDAdvertised property. Return status indicates success
+ * of operation.
  *
  * @method OcaNetworkSignalChannel#GetIDAdvertised
  * @returns {Promise<Uint8Array>}
  *   A promise which resolves to a single value of type ``Uint8Array``.
  */
 /**
- * Gets the object number of the stream network object to which this media port belongs. Return status indicates success of operation.
+ * Gets the object number of the stream network object to which this media port
+ * belongs. Return status indicates success of operation.
  *
  * @method OcaNetworkSignalChannel#GetNetwork
  * @returns {Promise<number>}
  *   A promise which resolves to a single value of type ``number``.
  */
 /**
- * Gets the remote channel ID to which this channel is connected. Empty if the channel is not connected (at least not directly to another channel). For stream-oriented connection management this functionality is not used (i.e. the remote channel ID will always be empty).
+ * Gets the remote channel ID to which this channel is connected. Empty if the
+ * channel is not connected (at least not directly to another channel). For
+ * stream-oriented connection management this functionality is not used (i.e.
+ * the remote channel ID will always be empty).
  *
  * @method OcaNetworkSignalChannel#GetRemoteChannelID
  * @returns {Promise<Uint8Array>}
  *   A promise which resolves to a single value of type ``Uint8Array``.
  */
 /**
- * Gets the value of the SourceOrSink property. Return status indicates success of operation.
+ * Gets the value of the SourceOrSink property. Return status indicates success
+ * of operation.
  *
  * @method OcaNetworkSignalChannel#GetSourceOrSink
  * @returns {Promise<OcaNetworkMediaSourceOrSink>}
  *   A promise which resolves to a single value of type :class:`OcaNetworkMediaSourceOrSink`.
  */
 /**
- * Gets the value of the Status property. Return status indicates success of operation.
+ * Gets the value of the Status property. Return status indicates success of
+ * operation.
  *
  * @method OcaNetworkSignalChannel#GetStatus
  * @returns {Promise<OcaNetworkSignalChannelStatus>}
  *   A promise which resolves to a single value of type :class:`OcaNetworkSignalChannelStatus`.
  */
 /**
- * Removes this channel from the passed stream connector. Return status indicates success of operation.
+ * Removes this channel from the passed stream connector. Return status
+ * indicates success of operation.
  *
  * @method OcaNetworkSignalChannel#RemoveFromConnector
  * @param {number} Connector
@@ -109,7 +127,8 @@ export const OcaNetworkSignalChannel = make_control_class(
  * @returns {Promise<void>}
  */
 /**
- * Sets the value of the IDAdvertised property. Return status indicates success of operation.
+ * Sets the value of the IDAdvertised property. Return status indicates success
+ * of operation.
  *
  * @method OcaNetworkSignalChannel#SetIDAdvertised
  * @param {Uint8Array} IDAdvertised
@@ -117,7 +136,9 @@ export const OcaNetworkSignalChannel = make_control_class(
  * @returns {Promise<void>}
  */
 /**
- * Sets the object number of the stream network object to which this media port belongs. Return status indicates success of operation. Only implemented for reconfigurable devices.
+ * Sets the object number of the stream network object to which this media port
+ * belongs. Return status indicates success of operation. Only implemented for
+ * reconfigurable devices.
  *
  * @method OcaNetworkSignalChannel#SetNetwork
  * @param {number} Network
@@ -125,7 +146,11 @@ export const OcaNetworkSignalChannel = make_control_class(
  * @returns {Promise<void>}
  */
 /**
- * Sets the remote channel ID to which this channel must be connected. Only used for channel-oriented connection management. For stream-oriented connection management this method is not used. Clearing the remote channel ID (i.e. tearing down the connection) can be done by passing an empty remote channel ID as parameter.
+ * Sets the remote channel ID to which this channel must be connected. Only used
+ * for channel-oriented connection management. For stream-oriented connection
+ * management this method is not used. Clearing the remote channel ID (i.e.
+ * tearing down the connection) can be done by passing an empty remote channel
+ * ID as parameter.
  *
  * @method OcaNetworkSignalChannel#SetRemoteChannelID
  * @param {Uint8Array} RemoteChannelID
@@ -133,59 +158,57 @@ export const OcaNetworkSignalChannel = make_control_class(
  * @returns {Promise<void>}
  */
 /**
- * This event is emitted when the property ConnectorPins changes in the remote object.
+ * This event is emitted when the property ``ConnectorPins`` changes in the remote object.
  * The property ``ConnectorPins`` is described in the AES70 standard as follows.
- * Map of object numbers of <b>OcaStreamConnector</b> objects to
- * <b>OcaStreamConnectorPinIndex </b>of these connectors. This map
- * identifies which <b>OcaStreamConnector</b> objects contain this
- * network signal channel, and indicates at what pin of the connector
- * this channel is found. If the <b>OcaNetworkSignalChannel</b> object is
- * not part of any <b>OcaStreamConnector </b>this map is empty. Note that
- * <b>OcaNetworkSignalChannel</b> objects of type <b>Sink</b> cannot have
- * more than one entry in the map, else it would implicitly perform
- * mixing. <b>OcaNetworkSignalChannel </b>objects of type <b>Source</b>
- * can have multiple entries in the map.
+ * Map of object numbers of **OcaStreamConnector** objects to
+ * **OcaStreamConnectorPinIndex** of these connectors. This map identifies which
+ * **OcaStreamConnector** objects contain this network signal channel, and
+ * indicates at what pin of the connector this channel is found. If the
+ * **OcaNetworkSignalChannel** object is not part of any **OcaStreamConnector**
+ * this map is empty. Note that **OcaNetworkSignalChannel** objects of type
+ * **Sink** cannot have more than one entry in the map, else it would implicitly
+ * perform mixing. **OcaNetworkSignalChannel** objects of type **Source** can
+ * have multiple entries in the map.
  *
  * @member {PropertyEvent<Map<number, number>>} OcaNetworkSignalChannel#OnConnectorPinsChanged
  */
 /**
- * This event is emitted when the property IDAdvertised changes in the remote object.
+ * This event is emitted when the property ``IDAdvertised`` changes in the remote object.
  * The property ``IDAdvertised`` is described in the AES70 standard as follows.
- * Character name or binary identifier of the port that is advertised on
- * the network to be found by other devices' discovery processes.
- * Depending on the media transport architecture being used, this ID may
- * be globally unique throughout the network, or only unique within the
- * scope of the specific Network instance to which the port is attached.
+ * Character name or binary identifier of the port that is advertised on the
+ * network to be found by other devices' discovery processes. Depending on the
+ * media transport architecture being used, this ID may be globally unique
+ * throughout the network, or only unique within the scope of the specific
+ * Network instance to which the port is attached.
  *
  * @member {PropertyEvent<Uint8Array>} OcaNetworkSignalChannel#OnIDAdvertisedChanged
  */
 /**
- * This event is emitted when the property Network changes in the remote object.
+ * This event is emitted when the property ``Network`` changes in the remote object.
  * The property ``Network`` is described in the AES70 standard as follows.
- * Object number of stream network object (<b>OcaStreamNetwork</b> or one
- * of its subclasses) to which this signal channel belongs.
+ * Object number of stream network object (**OcaStreamNetwork** or one of its
+ * subclasses) to which this signal channel belongs.
  *
  * @member {PropertyEvent<number>} OcaNetworkSignalChannel#OnNetworkChanged
  */
 /**
- * This event is emitted when the property RemoteChannelID changes in the remote object.
+ * This event is emitted when the property ``RemoteChannelID`` changes in the remote object.
  * The property ``RemoteChannelID`` is described in the AES70 standard as follows.
  * External ID of ultimate source or destination of signal.
  *
  * @member {PropertyEvent<Uint8Array>} OcaNetworkSignalChannel#OnRemoteChannelIDChanged
  */
 /**
- * This event is emitted when the property SourceOrSink changes in the remote object.
+ * This event is emitted when the property ``SourceOrSink`` changes in the remote object.
  * The property ``SourceOrSink`` is described in the AES70 standard as follows.
- * Describes whether this signal channel is source (emits signals into
- * the network) or sink (receives signals from the network). Sources are
- * sometimes called "talkers", and sinks are sometimes called
- * "listeners".
+ * Describes whether this signal channel is source (emits signals into the
+ * network) or sink (receives signals from the network). Sources are sometimes
+ * called "talkers", and sinks are sometimes called "listeners".
  *
  * @member {PropertyEvent<OcaNetworkMediaSourceOrSink>} OcaNetworkSignalChannel#OnSourceOrSinkChanged
  */
 /**
- * This event is emitted when the property Status changes in the remote object.
+ * This event is emitted when the property ``Status`` changes in the remote object.
  * The property ``Status`` is described in the AES70 standard as follows.
  * Status of the port
  *

package/src/controller/ControlClasses/OcaNumericObserver.d.ts

@@ -1,46 +1,68 @@
-import { RemoteDevice } from '../remote_device';
-import { OcaAgent } from './OcaAgent';
+import { OcaObserverState } from '../../types/OcaObserverState';
+import { IOcaProperty, OcaProperty } from '../../types/OcaProperty';
+import {
+  IOcaRelationalOperator,
+  OcaRelationalOperator,
+} from '../../types/OcaRelationalOperator';
 import { Event } from '../event';
-
 import { PropertyEvent } from '../property_event';
-import { IOcaProperty } from '../../types/OcaProperty';
-import { IOcaRelationalOperator } from '../../types/OcaRelationalOperator';
-import { OcaObserverState } from '../../types/OcaObserverState';
-import { OcaProperty } from '../../types/OcaProperty';
-import { OcaRelationalOperator } from '../../types/OcaRelationalOperator';
+import { RemoteDevice } from '../remote_device';
+import { OcaAgent } from './OcaAgent';
 
 /**
- * Observer of a scalar numeric or boolean property ("target property") of a specified object. Does not work for array, list, map, struct, or string properties.  **OcaNumericObserver**  emits an  **Observation** event under certain conditions. There are three kinds of conditions:
+ * Observer of a scalar numeric or boolean property ("target property") of a
+ * specified object. Does not work for array, list, map, struct, or string
+ * properties. **OcaNumericObserver** emits an **Observation** event under
+ * certain conditions. There are three kinds of conditions:
  *
- *  -  **Numeric comparison** . The target property value meets a certain comparison condition. A selection of comparison operators is available. Such observations are called "asynchronous observations".
+ *  - **Numeric comparison**. The target property value meets a certain
+ *    comparison condition. A selection of comparison operators is available.
+ *    Such observations are called "asynchronous observations".
  *
+ *  - **Timer expiry**. The value of the** Period** property, if nonzero, is a
+ *    the time interval for the recurrent timed emission of **Observation**
+ *    events. Such events ("periodic observations") are emitted regardless of
+ *    the target property's value.
  *
- *  -  **Timer expiry** . The value of the **Period**  property, if nonzero, is a the time interval for the recurrent timed emission of  **Observation**  events. Such events ("periodic observations") are emitted regardless of the target property's value.
+ *  - **Combination of (1) and (2)**. If a numeric comparison and a nonzero
+ *    period are both specified, then the **Observation** event is emitted when
+ *    the timer expires **and** the numeric comparison is true. Such
+ *    observations are called "conditional-periodic observations".
  *
  *
- *  -  **Combination of (1) and (2)** . If a numeric comparison and a nonzero period are both specified, then the  **Observation**  event is emitted when the timer expires  **and**  the numeric comparison is true. Such observations are called "conditional-periodic observations".
- *   This is a weakly typed class. Its threshold is specified as an  **OcaFloat64** number.
+ * This is a weakly typed class. Its threshold is specified as an **OcaFloat64**
+ * number.
  *
- *  - For unsigned integer targets, the threshold and target are both coerced to  **OcaUint64** before comparing.
+ *  - For unsigned integer targets, the threshold and target are both coerced to
+ *    **OcaUint64** before comparing.
  *
+ *  - For signed integer targets, the threshold and target are both coerced to
+ *    **OcaInt64** before comparing.
  *
- *  - For signed integer targets, the threshold and target are both coerced to  **OcaInt64** before comparing.
+ *  - For boolean values, the threshold hreshold and target are both coerced to
+ *    **OcaUint8**, True is assigned the value One, False is assigned the value
+ *    Zero.
  *
  *
- *  - For boolean values, the threshold hreshold and target are both coerced to  **OcaUint8** , True is assigned the value One, False is assigned the value Zero.
- *   Note that this coercion may result in rounding errors if the observed datatype is of type OcaUint64 or OcaUint64. An  **OcaNumericObserver** instance and the property it observes are bound at the time the  **OcaNumericObserver**  instance is constructed. For static devices, construction will occur during manufacture, or possibly during a subsequent hardware configuration step. For reconfigurable devices, construction might be done by online controllers as part of device configuration sessions. This class is normally used for monitoring readings of sensor readings, but may be used equally well for watching workers' parameter settings.
+ * Note that this coercion may result in rounding errors if the observed
+ * datatype is of type OcaUint64 or OcaUint64. An **OcaNumericObserver**
+ * instance and the property it observes are bound at the time the
+ * **OcaNumericObserver** instance is constructed. For static devices,
+ * construction will occur during manufacture, or possibly during a subsequent
+ * hardware configuration step. For reconfigurable devices, construction might
+ * be done by online controllers as part of device configuration sessions. This
+ * class is normally used for monitoring readings of sensor readings, but may be
+ * used equally well for watching workers' parameter settings.
  * @extends OcaAgent
  * @class OcaNumericObserver
  */
 export declare class OcaNumericObserver extends OcaAgent {
   /**
-   * Event emitted to signal an asynchronous, periodic, or conditional-periodic observation.
+   * Event emitted to signal an asynchronous, periodic, or conditional-periodic
+   * observation.
    * @member OcaNumericObserver#OnObservation {Event}
-   * Event emitted to signal an asynchronous, periodic, or
-   * conditional-periodic observation.
    */
   OnObservation: Event;
-
   /**
    * This event is emitted whenever State changes.
    */
@@ -79,7 +101,10 @@ export declare class OcaNumericObserver extends OcaAgent {
   constructor(objectNumber: number, device: RemoteDevice);
 
   /**
-   * Gets the value of the observed property that was reported by the most recently emitted Observation event. If the numeric observer has never emitted an Observation event, returns the IEEE not-a-number value. The return status indicates whether the value has been successfully returned.
+   * Gets the value of the observed property that was reported by the most
+   * recently emitted Observation event. If the numeric observer has never
+   * emitted an Observation event, returns the IEEE not-a-number value. The
+   * return status indicates whether the value has been successfully returned.
    *
    * @method OcaNumericObserver#GetLastObservation
    * @returns {Promise<number>}
@@ -88,7 +113,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetLastObservation(): Promise<number>;
 
   /**
-   * Gets the observer's state. The return value indicates whether the state was successfully retrieved.
+   * Gets the observer's state. The return value indicates whether the state was
+   * successfully retrieved.
    *
    * @method OcaNumericObserver#GetState
    * @returns {Promise<OcaObserverState>}
@@ -97,7 +123,9 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetState(): Promise<OcaObserverState>;
 
   /**
-   * Gets the identification of the property that the observer observes. The return value indicates whether the identification was successfully retrieved.
+   * Gets the identification of the property that the observer observes. The
+   * return value indicates whether the identification was successfully
+   * retrieved.
    *
    * @method OcaNumericObserver#GetObservedProperty
    * @returns {Promise<OcaProperty>}
@@ -106,17 +134,19 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetObservedProperty(): Promise<OcaProperty>;
 
   /**
-   * Sets the identification of the property that the observer observes. The return value indicates whether the identification was successfully set.
+   * Sets the identification of the property that the observer observes. The
+   * return value indicates whether the identification was successfully set.
    *
    * @method OcaNumericObserver#SetObservedProperty
-   * @param {OcaProperty} property
+   * @param {IOcaProperty} property
    *
    * @returns {Promise<void>}
    */
   SetObservedProperty(property: IOcaProperty): Promise<void>;
 
   /**
-   * Gets the value of the  **Threshold** property. The return value indicates whether the threshold value was successfully retrieved.
+   * Gets the value of the **Threshold** property. The return value indicates
+   * whether the threshold value was successfully retrieved.
    *
    * @method OcaNumericObserver#GetThreshold
    * @returns {Promise<number>}
@@ -125,7 +155,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetThreshold(): Promise<number>;
 
   /**
-   * Sets the value of the  **Threshold** property. The return value indicates whether the threshold value was successfully set.
+   * Sets the value of the **Threshold** property. The return value indicates
+   * whether the threshold value was successfully set.
    *
    * @method OcaNumericObserver#SetThreshold
    * @param {number} Threshold
@@ -135,7 +166,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   SetThreshold(Threshold: number): Promise<void>;
 
   /**
-   * Gets the value of the  **Operator** property. The return value indicates whether the property was successfully retrieved.
+   * Gets the value of the **Operator** property. The return value indicates
+   * whether the property was successfully retrieved.
    *
    * @method OcaNumericObserver#GetOperator
    * @returns {Promise<OcaRelationalOperator>}
@@ -144,17 +176,19 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetOperator(): Promise<OcaRelationalOperator>;
 
   /**
-   * Sets the value of the  **Operator** property. The return value indicates whether the operator was successfully set.
+   * Sets the value of the **Operator** property. The return value indicates
+   * whether the operator was successfully set.
    *
    * @method OcaNumericObserver#SetOperator
-   * @param {OcaRelationalOperator} _operator
+   * @param {IOcaRelationalOperator} operator
    *
    * @returns {Promise<void>}
    */
-  SetOperator(_operator: IOcaRelationalOperator): Promise<void>;
+  SetOperator(operator: IOcaRelationalOperator): Promise<void>;
 
   /**
-   * Gets the value of the  **TwoWay** property. The return value indicates whether the property was successfully retrieved.
+   * Gets the value of the **TwoWay** property. The return value indicates
+   * whether the property was successfully retrieved.
    *
    * @method OcaNumericObserver#GetTwoWay
    * @returns {Promise<boolean>}
@@ -163,7 +197,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetTwoWay(): Promise<boolean>;
 
   /**
-   * Sets the value of the  **TwoWay** property. The return value indicates whether the property was successfully set.
+   * Sets the value of the **TwoWay** property. The return value indicates
+   * whether the property was successfully set.
    *
    * @method OcaNumericObserver#SetTwoWay
    * @param {boolean} twoWay
@@ -173,7 +208,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   SetTwoWay(twoWay: boolean): Promise<void>;
 
   /**
-   * Gets the value of the  **Hysteresis** property. The return value indicates whether the property was successfully retrieved.
+   * Gets the value of the **Hysteresis** property. The return value indicates
+   * whether the property was successfully retrieved.
    *
    * @method OcaNumericObserver#GetHysteresis
    * @returns {Promise<number>}
@@ -182,7 +218,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetHysteresis(): Promise<number>;
 
   /**
-   * Sets the value of the  **Hysteresis** property. The return value indicates whether the property was successfully set.
+   * Sets the value of the **Hysteresis** property. The return value indicates
+   * whether the property was successfully set.
    *
    * @method OcaNumericObserver#SetHysteresis
    * @param {number} hysteresis
@@ -192,7 +229,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   SetHysteresis(hysteresis: number): Promise<void>;
 
   /**
-   * Gets the value of the  **Period** property. The return value indicates whether the property was successfully retrieved.
+   * Gets the value of the **Period** property. The return value indicates
+   * whether the property was successfully retrieved.
    *
    * @method OcaNumericObserver#GetPeriod
    * @returns {Promise<number>}
@@ -201,7 +239,8 @@ export declare class OcaNumericObserver extends OcaAgent {
   GetPeriod(): Promise<number>;
 
   /**
-   * Sets the value of the  **Period** property. The return value indicates whether the property was successfully set.
+   * Sets the value of the **Period** property. The return value indicates
+   * whether the property was successfully set.
    *
    * @method OcaNumericObserver#SetPeriod
    * @param {number} period