abelien-harness 0.10.0 → 0.11.0

package/skills/abelien-workspace/references/user-journey.md

@@ -13,7 +13,7 @@ Web 已提交基线 91fac59a 仍在 real_image 生图；原图绑定、CAD 原
 
 更新：2026-10-03。依据三份旅程文档、本地产品决策及可检索的相关会话收敛；问题选项数量与 clarify 的锚定输出契约一致。
 
-本文由 abelien-workspace 维护，是产品与宿主 Agent 共用的完整用户旅程及判定规则，作为唯一正文维护入口。guide 依据本文组织调用与对话；clarify 负责需求语义。职责与作品上下文见[领域模型](domain-model.md)。A1–C 用于解释用户所处的位置，不要求增加持久化阶段字段，也不代表对应功能已经上线。实际接入情况与旧 MVP 演示的边界集中在附录。
+本文由 abelien-workspace 维护，是产品与宿主 Agent 共用的完整用户旅程及判定规则，作为唯一正文维护入口；唯一的例外是 A1 通过之后到交付首版的逐阶段规则与允许动作，只在阶段计划中维护，本文 §5 的一览由它生成。guide 依据本文组织调用与对话；clarify 负责需求语义。职责与作品上下文见[领域模型](domain-model.md)。A1–C 用于解释用户所处的位置，不要求增加持久化阶段字段，也不代表对应功能已经上线。实际接入情况与旧 MVP 演示的边界集中在附录。
 
 <a id="image-retry-intent"></a>
 
@@ -216,7 +216,11 @@ AI 补充的是展示编排，须与用户已定义的行为一致并保留系
 
 ## 5. A2：尽早交给用户一个可以改的起点
 
-**机读阶段计划**：A1 通过之后到交付首版这一段，按意图（create／restore／modify／remix）的阶段顺序与各阶段的领域规则，另有机读形式[阶段计划](../assets/journey-stage-plan.json)，由 `workspace.journey-next` 解释（调用见 [能力映射](harness-binding.md#当前能力映射)）。§2.4 的识别与参考、本节的硬件初选和首版，对应计划的主线 `orders`；由真实结果触发的硬件重选与取舍、保底草模、修复和首版后合并提问，对应计划的旁路 `side`（§5.3、§6、§7）。本文是旅程规则的唯一正文，阶段计划是它的派生：两者不一致时以本文为准，先改本文，再同步阶段计划并升 `plan_version`。各阶段允许的动作（`actions`，宿主据此放行工具）只在阶段计划中声明，须与本文对该阶段的要求一致。
+<a id="journey-stage-plan"></a>
+
+**阶段计划**：A1 通过之后到交付首版这一段，按意图（create／restore／modify／remix）的阶段顺序、各阶段的目标、领域规则与允许的动作，只在[阶段计划](../assets/journey-stage-plan.json)中维护，由 `workspace.journey-next` 解释；Web、Claude Code、Codex 等所有宿主都按它推进这一段（调用见[能力映射](harness-binding.md#当前能力映射)）。§2.4 的识别与参考、本节的硬件初选和首版，对应计划的主线 `orders`；由真实结果触发的硬件重选与取舍、保底草模、修复和首版后合并提问，对应计划的旁路 `side`（§5.3、§6、§7）。「[阶段计划一览](journey-stage-plan.md)」由 `npm run render:journey-plan` 从计划生成，测试比对两边一致，不要手改：要改某个阶段的规则或动作，就改计划、升 `plan_version` 并重新生成。本文其余部分维护 A1–C 判定与产品规则；计划的规则不得与之冲突，本文也不再逐阶段重复计划里的执行规则。
+
+各阶段的目标、规则与允许的动作见[阶段计划一览](journey-stage-plan.md)。
 
 ### 5.1 得到有来源的硬件初选
 
@@ -553,19 +557,19 @@ BOM 记录实际采用的组合，已有整机覆盖的功能不重复计件。
 | --- | --- | --- |
 | 硬件初选 | `user-journey-hardware` → `abelien-hardware-selection` → `hardware.search` → Agent 证据判断 → 本地 `hardware.select` 是正式入口；`user-journey-hardware-candidates` → OSS `hardware.search` / `hardware.finalize` 仅保存候选提案 | 当前环境一定连通；全组合检查通过；已成为产品确认版本 |
 | 硬件局部修订 | 本 MR 不包含修订能力和 workflow；以后须核对实际安装声明 | 修订入口已存在或服务已可用 |
-| 算法选型 | 本 MR 不包含算法域与组合 workflow；产品旅程保留其目标职责 | 算法入口已接入、实现已部署或在设备实测 |
+| 算法选型 | 正式硬件过门后由宿主另起 `user-journey-algorithm`；硬件与算法不串在同一个 run 里 | 算法入口已接入宿主、实现已部署或在设备实测 |
 | 3D 生成 | 有独立生成入口与 provider 适配；旧 workspace 生成 mock 已移除 | 已接通产品结构编辑、版本采用和装配验证闭环 |
 | 产品组合检查、卡片、版本采用及确认 | workspace 定义了业务要求；当前接入表未证明完整闭环 | 可以用普通资源写入或旧 `confirmPlan` 替代真实保存与校验 |
-| `user-journey` | 一个 `drive-product-journey` Agent 步骤承载本旅程；JSON 内的 `journey` 是 Agent 判定契约，不是内核条件分支 | 运行命令就自动完成创作；`advance` 自动校验 B3、版本或确认回执 |
+| 作品推进 | 宿主持有作品事实；A1 通过之后到交付首版的阶段与规则由 `workspace.journey-next` 按[阶段计划](#journey-stage-plan)给出；旧 `user-journey` workflow 及其 `journey` 判定契约已退役 | 拿到下一阶段就等于该阶段已完成；阶段计划可以代替 A1–C 判定、B3 或确认回执 |
 | `user-journey-mock`（旧 `user-journey`） | 执行定义、专属 mock 能力和实体机器已移除；仅保留历史运行与评估记录 | 动态需求澄清、真实二创、自由修改、B3 四项、真实支付或文件交付已通过 |
 
 这份产品旅程不随某一能力暂时未接通而退化成旧演示流程；执行时则始终只报告实际完成的部分。
 
-执行定义见 [user-journey.json](../workflows/user-journey.json)。当前内核只有顺序步骤：启动后停在 `drive-product-journey`，Agent 读取本文及 JSON 的 `journey`，在宿主对话和真实领域能力之间循环。A1、B2 等待、任务进行中、缺能力或普通修改都保持该步骤 `awaiting_agent`，不为表示进度而 advance，也不递归启动同名入口。输入只是启动上下文；后续事件、采用版本与确认事实必须从宿主／产品真实记录恢复，不手改 run.input 或另造产品状态。
+作品推进不是 workflow。A1、B2 等待、任务进行中、缺能力或普通修改时，宿主停止本轮并说明下一步，等新事实到来再判断；后续事件、采用版本与确认事实每轮从宿主／产品真实记录恢复，不另造产品状态。
 
-只有同版确认快照真实保存成功，且已向用户交代 PRD、BOM、分享／视频各自的真实交付状态后，才提交步骤结果作为本轮交接。文件仍可处于生成或失败状态，但必须有同版真实任务／错误依据；报价与预订不阻塞分享，也不是结束此步骤的必要条件。`replySchema` 仅指导 Agent 组装交接结果，内核不校验它及上述业务条件；`done` 只表示交接已提交，不证明产品成功。未接通确认接口时保持暂停并报告缺口，不能用 mock 顶替。C 后的新修改继续按本文处理，已 done 的 run 不再 advance。
+只有同版确认快照真实保存成功，且已向用户交代 PRD、BOM、分享／视频各自的真实交付状态后，才算本轮交接完成。文件仍可处于生成或失败状态，但必须有同版真实任务／错误依据；报价与预订不阻塞分享，也不是交接的必要条件。交接完成只表示已交代真实状态，不证明产品成功。未接通确认接口时报告缺口，不能用 mock 顶替。C 后的新修改继续按本文处理。
 
-**旧实例迁移：** `user-journey-mock` 执行定义已删除，历史记录不改名、不删除。旧名 `user-journey` 的 25 步实例及已命名为 `user-journey-mock` 的实例都仅查看原始 status，不取新版 HTTL 或 advance。恢复真实作品时回读产品上下文后进入新入口，不重放旧 mock 副作用。
+**旧实例迁移：** `user-journey-mock` 与 `user-journey` 执行定义都已删除，历史记录不改名、不删除。`user-journey` 的单步与 25 步实例、已命名为 `user-journey-mock` 的实例都仅查看原始 status，不取 HTTL 或 advance。恢复真实作品时回读产品上下文后按本文与阶段计划接续，不重放旧 mock 副作用。
 
 ## 附录 C：来源与维护入口
 

package/skills/abelien-workspace/workflows/definitions/0852e4949f5a6246880c1a26bf5ccaa42f8cda06b960e7c7ce234a0a176878f9.json

@@ -1,229 +0,0 @@
-{
-  "name": "user-journey-hardware-algorithm",
-  "domain": "abelien-workspace",
-  "executionProtocol": "pinned-result-v1",
-  "description": "Library recall, suitability review, fixed Prismer-first/Volc evidence for unresolved slots, source-bound merge, then the same formal hardware.select and gate",
-  "input": {
-    "required": [
-      "requirements",
-      "reactions"
-    ]
-  },
-  "steps": [
-    {
-      "id": "record-requirements",
-      "executor": "cli",
-      "action": "resource.put",
-      "args": {
-        "kind": "draft",
-        "id": "hardware-algorithm-d-{{hash}}",
-        "body": {
-          "requirements": "{{input.requirements}}",
-          "reactions": "{{input.reactions}}"
-        }
-      }
-    },
-    {
-      "id": "classify-hardware",
-      "executor": "agent",
-      "instruction": "需求已澄清；requirements 是 clarify 的 Requirements：context 为落点与场景，reaction[] 为全部触发→反应，limits[] 每项带 strength。按全部 reaction 推导功能槽位与数量，strength=hard 的 limits 进 hard_constraints，preference 只作排序提示；缺 reaction 或只有品类标签时停止并说明。读取同级 abelien-hardware-selection/SKILL.md，并用其 scripts/load-guide.mjs 依次按需加载 entry、命中的 level1、命中的 level2、contract；仅提交功能槽位、数量、受控三级路径和需求硬约束，不提交型号或猜测数据库事实。回复 {\"slots\":[...]}；若需求不足或路径不确定，停止并说明，不能伪造槽位。",
-      "replySchema": {
-        "slots": "array"
-      }
-    },
-    {
-      "id": "search-hardware-wikis",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.search",
-        "input": {
-          "operation": "search",
-          "query": "{{input.requirements}}",
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "policy": {
-            "prefer_system_candidates": true,
-            "top_k_per_slot": 8,
-            "include_content": true
-          }
-        }
-      }
-    },
-    {
-      "id": "hardware-knowledge-recalled",
-      "executor": "cli",
-      "action": "machine.send",
-      "args": {
-        "machine": "hardware-recall",
-        "event": "confirmRecall",
-        "instance": "{{steps.search-hardware-wikis.resource.id}}"
-      }
-    },
-    {
-      "id": "review-hardware-candidates",
-      "executor": "agent",
-      "instruction": "Read the complete library candidates and original requirements/slots. Review suitability against function and every hard constraint. Reply {\"unresolved_slots\":[{\"slot_id\":\"original slot\",\"reason\":\"no candidates or specific reasons all candidates are unsuitable\",\"query\":\"official model search targeting function/category/key hard constraints\",\"count\":10}]}. Every zero-candidate slot requires supplemental search. All unsuitable candidates also require search. Preserve rechargeable built-in battery, wireless charging, and all other original requirements; do not ask the user to drop a requirement because the catalog is empty. unresolved_slots contains only slots that need search. Omit suitable library slots entirely; never add placeholder rows with an empty query or count=0. Return [] when all slots are suitable. Before committing this review, the trusted host validates the full original requirements, slots and recall with validate-web-search-plan.mjs; a VALIDATION reply preserves this pause so the same run can be corrected. Count is optional and a positive integer; Prismer search.topK and return.topK are explicit. Do not apply undocumented Prismer query/result limits or truncate requirements. The trusted fixed Prismer-first policy permits Volc only after a saved definitive denial, successful empty query or unsent missing Key; Volc alone checks its official 1-100 character Query and Count 1-50 at dispatch. Unknown dispatched effects never authorize fallback or a new invocation. Do not supply URLs, credentials, commands or providers. System reuse is optional: poor matches must not force complex whole systems. Concept visuals and the original requirements come first.",
-      "replySchema": {
-        "unresolved_slots": "array"
-      }
-    },
-    {
-      "id": "search-hardware-web",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.web-search",
-        "input": {
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "recall_id": "{{steps.search-hardware-wikis.resource.id}}",
-          "unresolved_slots": "{{steps.review-hardware-candidates.result.unresolved_slots}}"
-        }
-      }
-    },
-    {
-      "id": "extract-web-hardware",
-      "executor": "agent",
-      "instruction": "When pages contain blob_ref, use resource get <evidenceResourceId> --page <pageId> to read each required full original page; never copy page bodies into replies. Read the persisted hardware-web-evidence pages from search-hardware-web in full. Search Content/snippets/provider official labels are not complete official pages or proof of authority. Extract only manufacturer pages; uncertain source authority remains unknown and third-party mirrors are not official merely because their URL contains a manufacturer domain. Reply {\"candidates\":[{\"slot_id\":\"original slot\",\"page_id\":\"persisted page ID\",\"manufacturer\":\"exact manufacturer\",\"manufacturer_quote\":\"at least 8 source characters\",\"model\":\"exact model\",\"model_quote\":\"at least 8 source characters\",\"parts\":[{\"name\":\"physical part name\",\"name_quote\":\"exact source quote\",\"shape\":\"box|cylinder|sphere|unknown\",\"shape_quote\":\"exact source quote\",\"dimensions_mm\":{\"length\":20,\"width\":12,\"height\":3},\"dimension_quotes\":{\"length\":\"exact quote identifying this part, axis, numeric value and unit\",\"width\":\"exact quote\",\"height\":\"exact quote\"}}]}]}. Quotes must include the exact part/name/shape they support. Each physical part has separate dimensions; cylinders use diameter/height, spheres use diameter. Unknown dimensions are omitted, never invented or defaulted. Conflicting versions and unknown multi-part overall dimensions remain unknown; do not combine contradictory versions. Do not submit page bodies, official/verified/CAD_available/source/geometry claims. Missing reliable pages or no network means candidates empty. This is envelope_only, not true component CAD or engineering verification. For an attributed tuple such as Back Panel: 48mm x 32mm x 0.5mm, add dimensions_quote with the entire exact source string and dimension_axes:[\"length\",\"width\",\"height\"] in original order; dimensions_mm must map each original value/unit to that explicitly declared axis. Preserve alternate imperial tuples in the quote; never use their values as mm or borrow another part's measurements. A 2-value tuple leaves height unknown. A box inferred from dimensions is only an envelope expression: actual part shape and orientation remain unknown. dimension_quotes may be empty for this tuple mode. Never invent coil thickness or total assembly dimensions.",
-      "replySchema": {
-        "candidates": "array"
-      }
-    },
-    {
-      "id": "merge-hardware-web",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.web-merge",
-        "input": {
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "recall_id": "{{steps.search-hardware-wikis.resource.id}}",
-          "evidence_id": "{{steps.search-hardware-web.resource.id}}",
-          "candidates": "{{steps.extract-web-hardware.result.candidates}}"
-        }
-      }
-    },
-    {
-      "id": "select-hardware-from-wikis",
-      "executor": "agent",
-      "instruction": "先读 abelien-hardware-selection/references/selection-service-contract.md 与真实候选的完整 Wiki。每槽位选择一个真实 component_id，显式 quantity 等于槽位 quantity；manufacturer/model 取候选，selection_reason 非空，wiki_evidence 为至少 8 字符的 Wiki 原文引用数组。selected_models 每项需 constraint_checks，覆盖 function、slot:<hard_constraints 的键>、limit:<每项 hard limit.id>；每项包含 constraint_id、status=verified|unknown|incompatible、reason、evidence:[{component_id,quote}]。多型号另给 compatibility_checks：power、interfaces 两维须包含 status、reason、每个型号的原文 evidence，可信电气数据确定性通过时以 compatibility_report 为准；mechanical、thermal、software 只作提示，可选填写，但填 incompatible 仍阻塞。证据不足填 unknown，不可编造。status=verified|needs_confirmation，plan_mode=assemble_new|adapt_system，其余数组 selected_models/coverage_ledger/remaining_slots/unknowns/replacement_plan 必填。先比较整机，但整机继承缺 manifest 必须待确认，不凭文案抵扣数量。verified 只表示 Wiki 证据判断通过，不是独立工程兼容求解或实测，不代表采用。 Read only merge-hardware-web candidates for the final choice. Preserve structured limits.envelope and source strength; dimension metadata/name/selection-line identity are supplied by the trusted finalizer, never invented. Incompatible dimension candidates require replacement; only decision_required (user hard limit, measured/datasheet size, no axis-aligned fit) returns needs_confirmation, other risk/unknown stays advisory and risk candidates rank last. Electrically incompatible candidates (trusted data: missing bus type or count) require replacing one side; ELECTRICAL_SUPPLY_GAP means add a power or regulator part. all_indexed_candidates_rejected is scoped to this indexed category; occupancy is advisory and clear is only coarse single-part screening. Whole-system reuse is optional; a poor match never forces a complex baseline. External IDs are external:<hash>, with source authority and engineering unknowns; envelopes are not component CAD and cannot grant adoption or delivery.",
-      "replySchema": {
-        "status": "verified|needs_confirmation",
-        "plan_mode": "adapt_system|assemble_new",
-        "selected_models": "array",
-        "coverage_ledger": "array",
-        "remaining_slots": "array",
-        "unknowns": "array",
-        "replacement_plan": "array",
-        "compatibility_checks": "array"
-      }
-    },
-    {
-      "id": "select-hardware",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.select",
-        "input": {
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "recall_id": "{{steps.merge-hardware-web.resource.id}}",
-          "selection_proposal": "{{steps.select-hardware-from-wikis.result}}"
-        }
-      }
-    },
-    {
-      "id": "record-hardware-selection",
-      "executor": "cli",
-      "action": "resource.update",
-      "args": {
-        "id": "{{steps.record-requirements.resource.id}}",
-        "bodyPatch": {
-          "hardwareSelectionId": "{{steps.select-hardware.resource.id}}",
-          "hardwareSelectionStatus": "{{steps.select-hardware.result.status}}",
-          "hardwareSelectionRevision": "{{steps.select-hardware.result.revision}}",
-          "hardwarePlanMode": "{{steps.select-hardware.result.plan_mode}}"
-        }
-      }
-    },
-    {
-      "id": "hardware-selected",
-      "executor": "cli",
-      "action": "machine.send",
-      "args": {
-        "machine": "hardware-selection",
-        "event": "confirmSelection",
-        "instance": "{{steps.record-requirements.resource.id}}"
-      },
-      "completeWhen": {
-        "path": "steps.hardware-selected.result.to",
-        "equals": "selected_pending_confirmation"
-      },
-      "completionResult": {
-        "selectionId": "{{steps.select-hardware.resource.id}}",
-        "selectionStatus": "{{steps.select-hardware.result.status}}",
-        "selectionRevision": "{{steps.select-hardware.result.revision}}"
-      }
-    },
-    {
-      "id": "research-algorithms",
-      "executor": "agent",
-      "instruction": "硬件选型已完成。读取同级 abelien-algorithm/SKILL.md 和 references/research-policy.md，并从 context-json 的 select-hardware.resource 读取准确厂商、型号、能力和 Wiki 证据。针对 input.reactions 先检索硬件厂商官方资料，再检索算法或模型官方资料与 Hugging Face；端侧不满足且用户允许联网时才比较成熟云服务。选择每个 reaction 的最合适实现并回复 {\"bindings\":[...],\"candidates\":[...],\"sources\":[...],\"unavailable_sources\":[...],\"unknowns\":[...],\"blocking_unknowns\":[...]}；来源必须回读，binding 必须明确 edge、cloud 或 hybrid。",
-      "replySchema": {
-        "bindings": "array",
-        "candidates": "array",
-        "sources": "array",
-        "unavailable_sources": "array",
-        "unknowns": "array",
-        "blocking_unknowns": "array"
-      }
-    },
-    {
-      "id": "select-algorithms",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "algorithm.finalize",
-        "input": {
-          "operation": "select",
-          "hardware_selection_id": "{{steps.select-hardware.resource.id}}",
-          "hardware_selection_revision": "{{steps.select-hardware.result.revision}}",
-          "requirements": "{{input.requirements}}",
-          "reactions": "{{input.reactions}}",
-          "research": "{{steps.research-algorithms.result}}"
-        }
-      }
-    },
-    {
-      "id": "algorithm-selected",
-      "executor": "cli",
-      "action": "machine.send",
-      "args": {
-        "machine": "algorithm-selection",
-        "event": "confirmSelection",
-        "instance": "{{steps.select-algorithms.resource.id}}"
-      }
-    },
-    {
-      "id": "record-algorithm-selection",
-      "executor": "cli",
-      "action": "resource.update",
-      "args": {
-        "id": "{{steps.record-requirements.resource.id}}",
-        "bodyPatch": {
-          "algorithmSelectionId": "{{steps.select-algorithms.resource.id}}",
-          "algorithmSelectionStatus": "{{steps.select-algorithms.result.status}}",
-          "algorithmSelectionRevision": "{{steps.select-algorithms.result.revision}}"
-        }
-      }
-    }
-  ],
-  "result": {
-    "selectionId": "{{steps.select-hardware.resource.id}}",
-    "selectionStatus": "{{steps.select-hardware.result.status}}",
-    "selectionRevision": "{{steps.select-hardware.result.revision}}"
-  },
-  "legacyResume": "read_only"
-}

package/skills/abelien-workspace/workflows/definitions/1179e62586cf6d88c6820022a933f719b3b4eb3c0df0856fb7a0cc6341a9d630.json

@@ -1 +0,0 @@
-{"description":"完整产品旅程入口：从零／有效参考二创 → A1 需求可推断 → A2 首版 PRD/BOM → B1/B2 修改与必要决定 → B3 完整可确认 → C 同版快照与交付。用户可随时收尾进入仿真／Three.js 成果体验，收起编辑面板并保留 PRD 查看／导出入口；展示模式与确认阶段独立。workspace 维护业务条件，由 guide 跨轮调度，按模板逐轮维护 PRD，服务未接入时不假写入。","domain":"abelien-workspace","input":{"optional":{"entry":"scratch | remix；省略时由真实上下文判断，不由内核校验","imageRefs":"用户提供的参考图引用；仅图像不足时补充必要意图","productContextRef":"已有作品的真实上下文引用；恢复时回读最新版本，不把 run.input 当作当前事实","reference":"二创来源：sourceId、sourceRevision、授权范围及真实资产引用；不得伪造或继承原作品确认"},"required":["prompt"]},"journey":{"authority":"../references/user-journey.md","binding":"../references/harness-binding.md","capabilityRoutes":{"algorithm":"user-journey-algorithm；输入已验证硬件与完整 reactions","appearance":"读取 ../../abelien-appearance/SKILL.md：外观／ID editing、轮廓比例、CMF、部位造型、参考匹配及实际看图的视觉审查；图生网格按需调用 3dgen。独立生成成功不等于视觉通过或作品采用","clarify":"读取 ../../abelien-clarify/SKILL.md，整理需求；不是 CLI capability。","hardwareAndAlgorithm":"user-journey-hardware-algorithm；只在完整 reactions 及必要输入具备时使用","hardwareInitial":"user-journey-hardware → abelien-hardware-selection → hardware.search TOS → Agent 证据判断 → 本地 hardware.select；唯一正式初选入口；TOS hardware.search 只提供候选，不能静默替代正式服务","hardwareRevision":"user-journey-hardware-revise；服务需真实可用","productServices":"成果体验模式及面板切换、仿真／动作播放器、PRD 条目写入／回读、视图刷新、草稿／确认版导出、组合检查、版本采用、卡片、确认快照、分享与支付按宿主实际契约；缺失就报告，不用普通 resource.put 冒充业务写入或界面成功","structure":"读取 ../../abelien-structure/SKILL.md：早期空间约束、CAD 复用、必要的 Build123d 建模、装配与几何检查，并向 appearance 提供实际模型渲染。仅使用宿主实际能力，不把本地辅助脚本当成已部署 Web Worker；结构成功不等于外观通过或作品采用 优先从 OSS 按固定 ID／版本复用整机、子装配和组件，确认无可用资产才自建缺失部分；无权限、网络或摘要失败及不支持导入不等于无资产。"},"checkPolicy":{"blockingUnknown":"记录不知道什么、缺什么证据、影响什么；暂停依赖工作，不可确认，独立工作继续。","conflict":"原要求及授权内可解决则 B1 调整复查，否则 B2 取得取舍。","invalid":"无检查、过期／空／不完整检查、运行中或工具失败不能当成 pass 或非阻塞 unknown。","nonBlockingUnknown":"可随概念快照保留，但不得写成通过或实测。","pass":"只认可有证据的覆盖范围，仍核对 B3；设计范围不代表能力已接通。","scope":["行为覆盖","输入输出","运行环境","整体资源","供电联网","结构适配","用户要求"]},"clarify":"../../abelien-clarify/SKILL.md","contractVersion":"2026-10-05","domainModel":"../references/domain-model.md","entries":[{"id":"scratch","rules":["保留原话、图片和限制；文字优先于图片，不从图片擅自增加功能。","登录和失败恢复保留同一次意图与来源，避免重复建档；首次背景问卷不替代需求澄清。"]},{"id":"remix","rules":["核对来源版本、二创授权、3D/BOM/行为和可改范围；浏览可见不等于可编辑。","创建独立作品上下文，不继承来源确认；明确局部修改只处理受影响部分。","来源加载失败保留输入与引用，不暗换起点；无修改意图时明确做同款还是改哪里。"]}],"execution":{"cancellation":"仅明确放弃本次运行才 cancel；不喜欢、拒绝候选、继续修改或暂不决定不等于取消。","completion":"同版确认快照实际保存且交代真实交付状态后才 advance；由 completionGuard 调用可信宿主 verifyCompletion 回读证据，缺接口或未通过时保持暂停。文件或分享未就绪可按真实任务状态交接。可发布 handoff 引导用户查看交付或主动进入保存与预约，预订不是必经步骤，跳转不是业务回执。","continuation":"同一 Agent 步骤可以跨多轮对话；用户答复、任务结果和当前版本从宿主／产品回读，run.input 仅为启动快照。","engine":"workflow-v1-linear","interpretation":"journey 为供 Agent 阅读的产品判定契约；内核只执行 steps，不解析这里的阶段、规则、转移或 input.optional，也不校验 replySchema。","legacy":"旧 25 步定义、workspace mock 能力及 draft／quote 样例 FSM 已删除；旧 user-journey 或 user-journey-mock 实例只读原始 status，不取新版 HTTL 或 advance，不改历史文件。","mode":"agent_driven_loop","state":"A1–C 由真实事实推导，不持久化第二套产品 FSM；awaiting_agent 不等于 B2，done 不等于 C。","wait":"缺答案、缺能力、任务运行中或证据未变时保持 awaiting_agent；停止本轮并说明下一步，不空转、不提交假完成。"},"guide":"../../abelien-guide/SKILL.md","interactionInvitation":{"authority":"../references/user-journey.md#interaction-refinement","binding":"使用宿主实际支持的非阻塞选择能力，不虚构已注册卡片 kind 或 action key","eligibility":"按宿主实际版本核对展示条件；不能仅因需求足够就邀请体验尚未加载的主体；不等待最终 PRD 导出，未答不阻塞独立授权工作。","options":["继续细化交互","先收尾，体验成果"],"presentation":"可选选择题卡片，不是 B2 必答问题，不只口头邀请","selection":"继续才询问具体交互；收尾即进入 resultExperience；选择本身不修改需求或确认方案","title":"核心需求已经清楚了，接下来你想？","unanswered":"不代选、不催问、不覆盖必要问题卡；继续已有授权的独立工作"},"prdContract":"../references/prd-contract.md","prdMaintenance":{"boundary":"需求登记不等于实现通过，不为逐轮维护单独展示需求版 PRD 或要求确认文档；契约只供 Agent 阅读，不是内核执行器或已接通的写入 API","operations":["register","amend","withdraw"],"persistence":"按 prdContract 校验基线与事件，保留 ID、来源、未受影响内容及历史，经产品服务写入、回读后刷新同版视图；缺接口只保留待登记差异","startsAt":"A1","template":"读取 prdTemplate 的 source 与 sections：七块总览加需求清单／图片引用，不用三个编辑入口替代文档结构","trigger":"每轮有效需求新增、修改、撤回或澄清答复；领域采用／有效检查返回时刷新关联行"},"prdTemplate":"../assets/prd-template.json","resultExperience":{"authority":"../references/user-journey.md#result-experience","mode":"同一作品的展示模式，不增加 A1–C 阶段，不要求先满足 B3／C，不自动确认、取消或升版","panels":"收起对话、问题卡、配置、组件库及其他全部编辑面板，隐藏面板不占布局或接收焦点；保留作品、体验控制、继续修改及固定 PRD 入口，结果返回不自动展开面板","prd":"编辑与成果体验右上角常驻「PRD／导出」按钮，不随面板收起；主动打开查看／导出草稿或所选确认版，核对版本与文件状态，不要求先确认，关闭回体验","prdHint":"首次收尾在按钮旁轻提示，当前版 PRD 可读且能发起导出才提示“PRD 已整理，可查看或导出”；否则显示整理中、失败或未接入；文件真实可读才提示可下载。提示可消失，按钮常驻，完成后不自动展开文档","returnToEdit":"继续修改恢复原面板布局和作品上下文；单纯模式切换不升版，不重问已明确需求，具体修改才走正常更新回路","simulation":"当前版本有可运行仿真时展示仿真环境，提供真实输入／响应与停止／重置；说明仿真范围，不当实物验证","stateBoundary":"状态定义是播放器编排，保留用户／系统来源，不新增需求或写工程 pass，不复用 workflow 或实体 machine 状态；触发演示不等于修改作品","threeJs":"无可用仿真时，以已有需求或 AI 编排的少量 machine states 驱动 Three.js 可触发的抽象动作；状态、事件、动作、转换与复位绑定同版需求和模型，只用实际播放器支持的能力，不只展示静态模型或转动镜头","trigger":"用户点击随时收尾或明确表达收尾意图；只暂停提问时结合上下文，不自动离开编辑","unavailable":"模型或播放器未就绪时保留可用成果与真实加载／失败状态，不冒充可玩、不强制重新追问；仿真失败仅在行为演示可用时明确切换"},"stages":{"A1":{"allOf":["首版 PRD/BOM 全部需求侧必填字段可由用户事实或有依据、可撤销的系统假设推断","使用落点与完整行为足够明确，摘要不丢失行为","无阻塞歧义或用户硬要求缺口"],"purpose":"基础需求足以推断首版，不让用户填写工程表格","rules":["本轮明确需求按 prdContract 登记／修改／撤回 PRD 条目，保留原话、ID 和来源，不等待选型或确认。","只问阻塞首版且必须用户决定的内容；别帮我猜时停用相关默认。","基础需求足够后推进首版；按旅程 §4.1 核对宿主实际展示条件后，用可选选择题卡片邀请继续细化交互或先收尾。PRD 从已保存需求起可读，不强制展开、不增加文档确认关卡。交互已明确或用户已要求停止提问时不重复邀请。","交互细化邀请不生成 B2 待答阻塞；用户未答不推定偏好、不催问，独立且已授权工作可继续。操作选择不修改需求，具体交互答复才交 clarify 整理并更新同一需求。","满足即进入 A2，不再问是否生成；型号、价格、兼容与性能由工程证据取得，不让用户保证。"]},"A2":{"actions":["优先复用符合需求的 OSS 整机、子装配与组件 CAD，核对来源后尽早展示，审查与采用独立；没有可用 CAD 的文字创作先生成概念图，再自动选型并绑定原图构建 CAD。实际宿主缺能力时报告缺口，不能强行调用未注册工具。","完整需求驱动整机优先、剩余功能补组件；无合适整机时有依据地组合组件。","区分候选与实际采用，按真实采用契约形成当前方案。","硬件初版足够即展示可改起点，提供模板七块总览的草稿 PRD 与 BOM 资料入口，不自动展开完整文档，不等待全部 3D；填写提示不作事实。","标明来源、已选项、系统假设和待细化项；第一次邀请改外观、组件或互动。"],"failure":"无候选、来源不足、服务失败按真实缺口处理，不生成假型号或切换 mock。","firstInvitation":{"blocking":false,"rule":"用户不答仍继续输入与授权已具备的独立 3D、算法和结构工作；不是 B2 必答卡。同轮已展示交互邀请选择题卡片时合并，不重复弹卡，用户已要求停止追问时只展示真实结果，不再次邀请；成果体验中保持面板收起。"},"purpose":"尽早展示有来源的阶段产物并补充硬件事实"},"B1":{"cycle":["消费真实事件，必要时更新完整需求并按 prdContract 同轮维护 PRD 条目","领域执行／提案","校验并实际采用","采用变化后更新产品版本，使旧检查失效","对当前完整组合进行有效检查，刷新同版 PRD 的实现与检查列","重判 B1／B2／B3 或等待"],"purpose":"围绕同一方案执行受影响的细化和修改","rules":["颜色、话术等局部变化不机械重选整机；纯咨询、浏览、旋转、发卡、进度和只说继续修改不升版。","冻结区不可改；非冻结区仍需实际资产支持，不把渲染节点选择等同功能器件替换。","换底依据落点、运动方式、包络档根本变化；保留需求，改变硬要求或超出授权先问。","过期结果不得覆盖新版；候选、同意提案、工具成功与实际采用分开。","已采用 A 上的 CAD 修改使用现有受信 Studio broker：同一修改单依次 modification create → tool register → invocation submit/get → receipt get；未知写入只读原身份，不换 operation 或重复付费调用。","B 检查 conflict 后仅在原授权内以 parentCandidateId=B 和原报告 repairBasis 生成 C；整条候选链的 baseline/current 仍是 A，C 通过检查后也须显式采用才成为下一版。","暂停、刷新和接续复用原修改单、invocation、wait、执行定义与根预算；取消只保存回执，重复通知只接续一次，unknown 不自动返工。"]},"B2":{"purpose":"仅为影响当前工作的必要用户决定等待","questionPolicy":{"defaultQuestions":1,"freeText":true,"maxCardsPerTurn":1,"maxIndependentQuestions":3,"optionsPerClarification":3},"rules":["选项须真实、有区别；不能凑造方案，可用暂不决定保留原状。","未答卡不叠发；按原问题、适用版本、答复事件消费。","部分答复只解决对应事项；自由输入可构成新需求。","沉默、超时、跳过、催进度不是授权；你定只覆盖具体上下文。","先别问了就暂停追问；独立且已授权工作可继续。","无卡片接口时仅对话询问，不声称创建了版本绑定卡。"]},"B3":{"allOf":["本次确认范围必要工作完成，无待办／运行中／失败，必要用户决定已解决","每条行为有实现依据，并可写出适用前提、触发、回应、结束／重触发和异常验收例子","当前版草稿 PRD、BOM 可读且必要产物就绪，确认版导出文件另计","当前完整组合检查有效，无未解决冲突和阻塞必要操作或能力承诺的未知"],"invitation":{"freeText":true,"options":["确认这个方案","继续修改"],"rule":"同版无变化不重复邀请；已明确同版确认直接复核；只说继续修改先了解改什么。"},"prohibition":"硬件 verified、没有待答卡、没有冲突或 workflow done 均不能替代四项全真。","purpose":"全部必要细化完成后第二次邀请确认"},"C":{"allOf":["有真实用户确认事件与明确当前版本，卡片答复另须匹配原卡","复核 B3 四项和未决事项；确认附带修改先改，旧确认不复用","真实产品服务已保存同版确认快照并返回可回读回执"],"deliverables":["PRD 按 prdContract 固化同版需求清单、七块总览、资产与证据引用及模板版本，不省略 GATE、不把概念确认当量产通过","BOM 对应实际采用组合，不重复计入整机已覆盖功能","快照与导出分开，真实文件可读才提供下载；失败重试同版，不重新确认","分享与视频绑定同一确认版本，视频每版触发一次；未就绪用真实静态内容与状态，不要求付款"],"preorder":["单份同版报价随确认返回，不设档位，不另设 Agent 询价／重算关卡","主动询价或已有预算才据实讨论价格，不虚构费用","用户主动进入订购页付款，预定金读取收款配置，不硬编码","真实支付和登记回执齐备才称预约成功；确认不是付款授权，付款不代表工程通过或实物交付"],"purpose":"保存同版确认快照，按真实状态交付","revision":"未付款冻结的作品可在保留旧快照后回 B1 形成新工作版；已 done 的入口不得再次 advance。"}},"transitions":[{"from":"entry","to":"A1","when":"新创作或有效参考二创"},{"action":"回答，不修改方案","from":"any","to":"same","when":"纯咨询"},{"action":"推进首版并维护可读 PRD；可选交互邀请另按 §4.1 核对宿主展示条件，不等待邀请答复","from":"A1","to":"A2","when":"三项全真"},{"action":"按 B2 问题规则询问并等待","from":"A1","to":"A1","when":"需要必要意图或硬要求值"},{"action":"首次邀请非阻塞，继续独立工作","from":"A2","to":"B1","when":"真实首版已展示"},{"from":"A2","to":"B2","when":"必须用户取舍"},{"from":"B1","to":"A1","when":"修改使首版需求重新不可推断"},{"from":"B1","to":"A2","when":"需求足够但首版尚未形成"},{"from":"B1","to":"B2","when":"需要必要用户决定"},{"action":"执行并检查；首版未形成时返回 A1／A2","from":"B2","to":"B1","when":"有效答复已消费"},{"from":"B1","to":"B1","when":"授权内仍有可执行工作"},{"action":"保留产物，说明缺口；条件变更后重判","from":"A2|B1","to":"same","when":"缺必要能力／证据或需等真实任务"},{"from":"B1","to":"B3","when":"四项全真"},{"action":"了解改什么，不取消、不升版","from":"B3","to":"B3","when":"只选继续修改"},{"from":"B3|C","to":"B1","when":"具体修改且当前作品未付款冻结"},{"action":"恢复执行或必要决定，不保存无效确认","from":"any","to":"B1|B2","when":"明确确认但尚不满足 B3 或当前版本已变"},{"from":"B3","to":"C","when":"明确同版确认且复核通过、快照保存成功"},{"action":"说明未确认成功，恢复后重新核对版本与 B3","from":"B3","to":"B3","when":"快照保存失败"},{"action":"报告独立真实状态，恢复同版任务，不重复确认","from":"C","to":"C","when":"导出／分享失败或仍生成"},{"action":"按 resultExperience 进入成果体验，收起所有编辑面板，保留需求、未定项和 PRD 查看／导出入口；不自动确认、代选、advance 或 cancel。若同时要求停止执行或明确放弃，按真实意图处理。","from":"any","to":"same","when":"用户点击随时收尾或明确结束交互细化"},{"action":"停止提问并保留当前上下文；是否切成果体验按真实意图，不自动确认、代选或取消","from":"any","to":"same","when":"用户只要求停止追问"},{"action":"按 resultExperience 操作展示模式、播放器或文档；保留当前产品版本和确认状态，具体修改另走需求变更回路","from":"any","to":"same","when":"成果体验中只点击继续修改、触发演示、重置或查看／导出 PRD"},{"from":"any","to":"cancelled","when":"用户明确放弃本次运行"}],"visualCadPolicy":{"assetFailure":"读取失败、无权限、摘要失败和不支持导入不是没有可用 CAD，恢复原引用或报告能力缺口。","authority":"../references/user-journey.md","hostBoundary":"产品目标不是能力声明；按实际注册工具、source-contract 和固定 release 执行。文档更新不自动替换宿主安装包。","imageReuse":"默认复用已结算且适用的原图；缺图显式转入注册生图工具的阶段，用户明确要求重画时在旧调用结算后准备新执行版本。不是永久禁止生图。","preview":"身份和完整性通过的真实 CAD 尽早只读预览；未审查明确标记，视觉／工程审查、显式采用与同版交付分别验收。","priority":"最快展示可信真实 CAD；优先 OSS 整机、子装配和组件，仅补建缺失部分。图片、自建包络和来源 CAD 分别标注。","recovery":"未知／在途调用只恢复原 invocation／wait，不因等待或缺回显重发。"},"workspace":"../SKILL.md"},"name":"user-journey","steps":[{"completionGuard":"workspace.confirmed-snapshot","executor":"agent","id":"drive-product-journey","instruction":"读取同级 abelien-guide/SKILL.md 作为调度与沟通指引；读取 abelien-workspace/SKILL.md 及本包 references/user-journey.md、domain-model.md、prd-contract.md、harness-binding.md 作为业务规则与运行约定；读取 guide 的 references/shared-response-rules.md，并读取本 user-journey.json 的 journey 判定契约（HTTL 不自动带出该字段）。需要理解或修改需求时读取 abelien-clarify/SKILL.md，承接其需求建议并按 workspace 采用及 PRD 契约处理，本轮明确需求及时登记／修改／撤回条目并回读，未接产品写入接口只保留待登记差异；从宿主恢复真实作品、来源、采用版本、待答题、任务和事件。按 A1→A2→B1/B2→B3→C 在本步骤内跨轮驱动，不递归启动 user-journey；从 A1 登记需求，基础需求足够后按 visualCadPolicy 推进阶段产物；PRD 从已保存需求起可读，不强制展开；按旅程 §4.1 和 interactionInvitation 核对宿主实际展示条件后再以选择题卡片邀请细化／收尾，不等待邀请答复；交互已明确或用户已要求停止提问时不重复邀请，用户点击随时收尾或明确收尾时按旅程 §4.2 与 resultExperience 进入成果体验，收起全部编辑面板；有可运行仿真就展示仿真环境，只有 Three.js 时用已有需求或 AI 编排的机器状态驱动真实可触发的抽象动作，保留 PRD 查看及草稿／确认版导出入口；缺播放器或 UI 接口如实说明，不假称可玩。保留需求与未定项，不自动确认、取消或升版；继续修改恢复原布局和上下文。真实硬件初版后按 assets/prd-template.json 七块总览补充已有草稿 PRD/BOM 资料入口，不自动展开完整文档，第一次修改邀请不阻塞，并与交互邀请合并或遵守停止追问约束。已采用设计的局部修改按 harness-binding 的受信序列创建一个 modification，逐步 tool register、invocation submit/get、receipt get；A 固定为采用基线，B conflict 只在原授权内以 B 为 parentCandidateId 和原报告为 repairBasis 生成 C，暂停／刷新／接续复用原身份和根预算，unknown 不返工，C 在现有产品事务显式采用前仍只是候选。实际变更采用后检查当前组合，B3 四项全真才第二次邀请确认。必要问题用 publish_agent_card(question)；完成节点有真实回执后可发布 publish_agent_card(handoff)，只选择注册 action key，所有跳转由用户点击，打开 checkout／payment 不等于预约、订单或支付成功。缺答案、证据、能力或任务未完成时保留 awaiting_agent 并如实说明，不 advance；继续修改不是 cancel。仅真实同版确认事件经复核、快照保存成功且真实交付状态已告知后，以可回读证据按 replySchema 提交一次交接；不得伪造引用或用 workspace mock 代替。replySchema 为指导而非内核校验，done 仅表示交接完成。只有用户明确放弃运行才 cancel。","replySchema":{"checkRef":"覆盖当前完整组合的有效检查引用","confirmationEventRef":"同版真实用户确认事件引用","delivery":{"bom":"状态及同版文件／任务／错误引用；可读文件才称 ready","prd":"状态及同版文件／任务／错误引用；可读文件才称 ready","share":"状态及同版内容／任务／错误引用，或明确未接入","video":"状态及同版任务／产物／错误引用，或明确未接入"},"nextActions":"仍需恢复的导出／分享任务或用户可选出口，不将预约设为必做","nonBlockingUnknowns":"具体未知、缺失证据与影响的数组；无则空数组","outcome":"confirmed_snapshot_handoff","productRef":"真实作品引用，不是临时 mock draft","revision":"确认的产品版本，不是 runId／digest","snapshotRef":"实际保存、可回读的同版确认快照引用"}}]}

package/skills/abelien-workspace/workflows/definitions/1a9afef5463f53e58222b3476c0002aa9703b5ced16f531e3224beb14a28f9a3.json

@@ -1,229 +0,0 @@
-{
-  "name": "user-journey-hardware-algorithm",
-  "domain": "abelien-workspace",
-  "executionProtocol": "pinned-result-v1",
-  "description": "Library recall, suitability review, fixed Prismer-first/Volc evidence for unresolved slots, source-bound merge, then the same formal hardware.select and gate",
-  "input": {
-    "required": [
-      "requirements",
-      "reactions"
-    ]
-  },
-  "steps": [
-    {
-      "id": "record-requirements",
-      "executor": "cli",
-      "action": "resource.put",
-      "args": {
-        "kind": "draft",
-        "id": "hardware-algorithm-d-{{hash}}",
-        "body": {
-          "requirements": "{{input.requirements}}",
-          "reactions": "{{input.reactions}}"
-        }
-      }
-    },
-    {
-      "id": "classify-hardware",
-      "executor": "agent",
-      "instruction": "需求已澄清；requirements 是 clarify 的 Requirements：context 为落点与场景，reaction[] 为全部触发→反应，limits[] 每项带 strength。按全部 reaction 推导功能槽位与数量，strength=hard 的 limits 进 hard_constraints，preference 只作排序提示；缺 reaction 或只有品类标签时停止并说明。读取同级 abelien-hardware-selection/SKILL.md，并用其 scripts/load-guide.mjs 依次按需加载 entry、命中的 level1、命中的 level2、contract；仅提交功能槽位、数量、受控三级路径和需求硬约束，不提交型号或猜测数据库事实。回复 {\"slots\":[...]}；若需求不足或路径不确定，停止并说明，不能伪造槽位。",
-      "replySchema": {
-        "slots": "array"
-      }
-    },
-    {
-      "id": "search-hardware-wikis",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.search",
-        "input": {
-          "operation": "search",
-          "query": "{{input.requirements}}",
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "policy": {
-            "prefer_system_candidates": true,
-            "top_k_per_slot": 8,
-            "include_content": true
-          }
-        }
-      }
-    },
-    {
-      "id": "hardware-knowledge-recalled",
-      "executor": "cli",
-      "action": "machine.send",
-      "args": {
-        "machine": "hardware-recall",
-        "event": "confirmRecall",
-        "instance": "{{steps.search-hardware-wikis.resource.id}}"
-      }
-    },
-    {
-      "id": "review-hardware-candidates",
-      "executor": "agent",
-      "instruction": "Read the complete library candidates and original requirements/slots. Review suitability against function and every hard constraint. Reply {\"unresolved_slots\":[{\"slot_id\":\"original slot\",\"reason\":\"no candidates or specific reasons all candidates are unsuitable\",\"query\":\"official model search targeting function/category/key hard constraints\",\"count\":10}]}. Every zero-candidate slot requires supplemental search. All unsuitable candidates also require search. Preserve rechargeable built-in battery, wireless charging, and all other original requirements; do not ask the user to drop a requirement because the catalog is empty. unresolved_slots contains only slots that need search. Omit suitable library slots entirely; never add placeholder rows with an empty query or count=0. Return [] when all slots are suitable. Before committing this review, the trusted host validates the full original requirements, slots and recall with validate-web-search-plan.mjs; a VALIDATION reply preserves this pause so the same run can be corrected. Count is optional and a positive integer; Prismer search.topK and return.topK are explicit. Do not apply undocumented Prismer query/result limits or truncate requirements. The trusted fixed Prismer-first policy permits Volc only after a saved definitive denial, successful empty query or unsent missing Key; Volc alone checks its official 1-100 character Query and Count 1-50 at dispatch. Unknown dispatched effects never authorize fallback or a new invocation. Do not supply URLs, credentials, commands or providers. System reuse is optional: poor matches must not force complex whole systems. Concept visuals and the original requirements come first.",
-      "replySchema": {
-        "unresolved_slots": "array"
-      }
-    },
-    {
-      "id": "search-hardware-web",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.web-search",
-        "input": {
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "recall_id": "{{steps.search-hardware-wikis.resource.id}}",
-          "unresolved_slots": "{{steps.review-hardware-candidates.result.unresolved_slots}}"
-        }
-      }
-    },
-    {
-      "id": "extract-web-hardware",
-      "executor": "agent",
-      "instruction": "When pages contain blob_ref, use resource get <evidenceResourceId> --page <pageId> to read each required full original page; never copy page bodies into replies. Read the persisted hardware-web-evidence pages from search-hardware-web in full. Search Content/snippets/provider official labels are not complete official pages or proof of authority. Extract only manufacturer pages; uncertain source authority remains unknown and third-party mirrors are not official merely because their URL contains a manufacturer domain. Reply {\"candidates\":[{\"slot_id\":\"original slot\",\"page_id\":\"persisted page ID\",\"manufacturer\":\"exact manufacturer\",\"manufacturer_quote\":\"at least 8 source characters\",\"model\":\"exact model\",\"model_quote\":\"at least 8 source characters\",\"parts\":[{\"name\":\"physical part name\",\"name_quote\":\"exact source quote\",\"shape\":\"box|cylinder|sphere|unknown\",\"shape_quote\":\"exact source quote\",\"dimensions_mm\":{\"length\":20,\"width\":12,\"height\":3},\"dimension_quotes\":{\"length\":\"exact quote identifying this part, axis, numeric value and unit\",\"width\":\"exact quote\",\"height\":\"exact quote\"}}]}]}. Quotes must include the exact part/name/shape they support. Each physical part has separate dimensions; cylinders use diameter/height, spheres use diameter. Unknown dimensions are omitted, never invented or defaulted. Conflicting versions and unknown multi-part overall dimensions remain unknown; do not combine contradictory versions. Do not submit page bodies, official/verified/CAD_available/source/geometry claims. Missing reliable pages or no network means candidates empty. This is envelope_only, not true component CAD or engineering verification. For an attributed tuple such as Back Panel: 48mm x 32mm x 0.5mm, add dimensions_quote with the entire exact source string and dimension_axes:[\"length\",\"width\",\"height\"] in original order; dimensions_mm must map each original value/unit to that explicitly declared axis. Preserve alternate imperial tuples in the quote; never use their values as mm or borrow another part's measurements. A 2-value tuple leaves height unknown. A box inferred from dimensions is only an envelope expression: actual part shape and orientation remain unknown. dimension_quotes may be empty for this tuple mode. Never invent coil thickness or total assembly dimensions.",
-      "replySchema": {
-        "candidates": "array"
-      }
-    },
-    {
-      "id": "merge-hardware-web",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.web-merge",
-        "input": {
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "recall_id": "{{steps.search-hardware-wikis.resource.id}}",
-          "evidence_id": "{{steps.search-hardware-web.resource.id}}",
-          "candidates": "{{steps.extract-web-hardware.result.candidates}}"
-        }
-      }
-    },
-    {
-      "id": "select-hardware-from-wikis",
-      "executor": "agent",
-      "instruction": "先读 abelien-hardware-selection/references/selection-service-contract.md 与真实候选的完整 Wiki。每槽位选择一个真实 component_id，显式 quantity 等于槽位 quantity；manufacturer/model 取候选，selection_reason 非空，wiki_evidence 为至少 8 字符的 Wiki 原文引用数组。selected_models 每项需 constraint_checks，覆盖 function、slot:<hard_constraints 的键>、limit:<每项 hard limit.id>；每项包含 constraint_id、status=verified|unknown|incompatible、reason、evidence:[{component_id,quote}]。多型号另给 compatibility_checks，逐 power/interfaces/mechanical/thermal/software 维度包含 status、reason、每个型号的原文 evidence。证据不足填 unknown，不可编造。status=verified|needs_confirmation，plan_mode=assemble_new|adapt_system，其余数组 selected_models/coverage_ledger/remaining_slots/unknowns/replacement_plan 必填。先比较整机，但整机继承缺 manifest 必须待确认，不凭文案抵扣数量。verified 只表示 Wiki 证据判断通过，不是独立工程兼容求解或实测，不代表采用。 Read only merge-hardware-web candidates for the final choice. Whole-system reuse is optional; a poor match never forces a complex baseline. External IDs are external:<hash>, with source authority and engineering unknowns; envelopes are not component CAD and cannot grant adoption or delivery.",
-      "replySchema": {
-        "status": "verified|needs_confirmation",
-        "plan_mode": "adapt_system|assemble_new",
-        "selected_models": "array",
-        "coverage_ledger": "array",
-        "remaining_slots": "array",
-        "unknowns": "array",
-        "replacement_plan": "array",
-        "compatibility_checks": "array"
-      }
-    },
-    {
-      "id": "select-hardware",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "hardware.select",
-        "input": {
-          "requirements": "{{input.requirements}}",
-          "slots": "{{steps.classify-hardware.result.slots}}",
-          "recall_id": "{{steps.merge-hardware-web.resource.id}}",
-          "selection_proposal": "{{steps.select-hardware-from-wikis.result}}"
-        }
-      }
-    },
-    {
-      "id": "record-hardware-selection",
-      "executor": "cli",
-      "action": "resource.update",
-      "args": {
-        "id": "{{steps.record-requirements.resource.id}}",
-        "bodyPatch": {
-          "hardwareSelectionId": "{{steps.select-hardware.resource.id}}",
-          "hardwareSelectionStatus": "{{steps.select-hardware.result.status}}",
-          "hardwareSelectionRevision": "{{steps.select-hardware.result.revision}}",
-          "hardwarePlanMode": "{{steps.select-hardware.result.plan_mode}}"
-        }
-      }
-    },
-    {
-      "id": "hardware-selected",
-      "executor": "cli",
-      "action": "machine.send",
-      "args": {
-        "machine": "hardware-selection",
-        "event": "confirmSelection",
-        "instance": "{{steps.record-requirements.resource.id}}"
-      },
-      "completeWhen": {
-        "path": "steps.hardware-selected.result.to",
-        "equals": "selected_pending_confirmation"
-      },
-      "completionResult": {
-        "selectionId": "{{steps.select-hardware.resource.id}}",
-        "selectionStatus": "{{steps.select-hardware.result.status}}",
-        "selectionRevision": "{{steps.select-hardware.result.revision}}"
-      }
-    },
-    {
-      "id": "research-algorithms",
-      "executor": "agent",
-      "instruction": "硬件选型已完成。读取同级 abelien-algorithm/SKILL.md 和 references/research-policy.md，并从 context-json 的 select-hardware.resource 读取准确厂商、型号、能力和 Wiki 证据。针对 input.reactions 先检索硬件厂商官方资料，再检索算法或模型官方资料与 Hugging Face；端侧不满足且用户允许联网时才比较成熟云服务。选择每个 reaction 的最合适实现并回复 {\"bindings\":[...],\"candidates\":[...],\"sources\":[...],\"unavailable_sources\":[...],\"unknowns\":[...],\"blocking_unknowns\":[...]}；来源必须回读，binding 必须明确 edge、cloud 或 hybrid。",
-      "replySchema": {
-        "bindings": "array",
-        "candidates": "array",
-        "sources": "array",
-        "unavailable_sources": "array",
-        "unknowns": "array",
-        "blocking_unknowns": "array"
-      }
-    },
-    {
-      "id": "select-algorithms",
-      "executor": "cli",
-      "action": "capability.run",
-      "args": {
-        "capability": "algorithm.finalize",
-        "input": {
-          "operation": "select",
-          "hardware_selection_id": "{{steps.select-hardware.resource.id}}",
-          "hardware_selection_revision": "{{steps.select-hardware.result.revision}}",
-          "requirements": "{{input.requirements}}",
-          "reactions": "{{input.reactions}}",
-          "research": "{{steps.research-algorithms.result}}"
-        }
-      }
-    },
-    {
-      "id": "algorithm-selected",
-      "executor": "cli",
-      "action": "machine.send",
-      "args": {
-        "machine": "algorithm-selection",
-        "event": "confirmSelection",
-        "instance": "{{steps.select-algorithms.resource.id}}"
-      }
-    },
-    {
-      "id": "record-algorithm-selection",
-      "executor": "cli",
-      "action": "resource.update",
-      "args": {
-        "id": "{{steps.record-requirements.resource.id}}",
-        "bodyPatch": {
-          "algorithmSelectionId": "{{steps.select-algorithms.resource.id}}",
-          "algorithmSelectionStatus": "{{steps.select-algorithms.result.status}}",
-          "algorithmSelectionRevision": "{{steps.select-algorithms.result.revision}}"
-        }
-      }
-    }
-  ],
-  "result": {
-    "selectionId": "{{steps.select-hardware.resource.id}}",
-    "selectionStatus": "{{steps.select-hardware.result.status}}",
-    "selectionRevision": "{{steps.select-hardware.result.revision}}"
-  },
-  "legacyResume": "read_only"
-}

package/skills/abelien-workspace/workflows/definitions/32ed16198839c06c36b43acbada5ba74403e37b2d351058bd7ad3d5269f76722.json

@@ -1 +0,0 @@
-{"description":"Library recall, suitability review, fixed Prismer-first/Volc evidence for unresolved slots, source-bound merge, then the same formal hardware.select and gate","domain":"abelien-workspace","input":{"required":["requirements","reactions"]},"name":"user-journey-hardware-algorithm","steps":[{"action":"resource.put","args":{"body":{"reactions":"{{input.reactions}}","requirements":"{{input.requirements}}"},"id":"hardware-algorithm-d-{{hash}}","kind":"draft"},"executor":"cli","id":"record-requirements"},{"executor":"agent","id":"classify-hardware","instruction":"需求已澄清；requirements 是 clarify 的 Requirements：context 为落点与场景，reaction[] 为全部触发→反应，limits[] 每项带 strength。按全部 reaction 推导功能槽位与数量，strength=hard 的 limits 进 hard_constraints，preference 只作排序提示；缺 reaction 或只有品类标签时停止并说明。读取同级 abelien-hardware-selection/SKILL.md，并用其 scripts/load-guide.mjs 依次按需加载 entry、命中的 level1、命中的 level2、contract；仅提交功能槽位、数量、受控三级路径和需求硬约束，不提交型号或猜测数据库事实。回复 {\"slots\":[...]}；若需求不足或路径不确定，停止并说明，不能伪造槽位。","replySchema":{"slots":"array"}},{"action":"capability.run","args":{"capability":"hardware.search","input":{"operation":"search","policy":{"include_content":true,"prefer_system_candidates":true,"top_k_per_slot":8},"query":"{{input.requirements}}","requirements":"{{input.requirements}}","slots":"{{steps.classify-hardware.result.slots}}"}},"executor":"cli","id":"search-hardware-wikis"},{"action":"machine.send","args":{"event":"confirmRecall","instance":"{{steps.search-hardware-wikis.resource.id}}","machine":"hardware-recall"},"executor":"cli","id":"hardware-knowledge-recalled"},{"executor":"agent","id":"review-hardware-candidates","instruction":"Read the complete library candidates and original requirements/slots. Review suitability against function and every hard constraint. Reply {\"unresolved_slots\":[{\"slot_id\":\"original slot\",\"reason\":\"no candidates or specific reasons all candidates are unsuitable\",\"query\":\"official model search targeting function/category/key hard constraints\",\"count\":10}]}. Every zero-candidate slot requires supplemental search. All unsuitable candidates also require search. Preserve rechargeable built-in battery, wireless charging, and all other original requirements; do not ask the user to drop a requirement because the catalog is empty. unresolved_slots contains only slots that need search. Omit suitable library slots entirely; never add placeholder rows with an empty query or count=0. Return [] when all slots are suitable. Before committing this review, the trusted host validates the full original requirements, slots and recall with validate-web-search-plan.mjs; a VALIDATION reply preserves this pause so the same run can be corrected. Count is optional and a positive integer; Prismer search.topK and return.topK are explicit. Do not apply undocumented Prismer query/result limits or truncate requirements. The trusted fixed Prismer-first policy permits Volc only after a saved definitive denial, successful empty query or unsent missing Key; Volc alone checks its official 1-100 character Query and Count 1-50 at dispatch. Unknown dispatched effects never authorize fallback or a new invocation. Do not supply URLs, credentials, commands or providers. System reuse is optional: poor matches must not force complex whole systems. Concept visuals and the original requirements come first.","replySchema":{"unresolved_slots":"array"}},{"action":"capability.run","args":{"capability":"hardware.web-search","input":{"recall_id":"{{steps.search-hardware-wikis.resource.id}}","requirements":"{{input.requirements}}","slots":"{{steps.classify-hardware.result.slots}}","unresolved_slots":"{{steps.review-hardware-candidates.result.unresolved_slots}}"}},"executor":"cli","id":"search-hardware-web"},{"executor":"agent","id":"extract-web-hardware","instruction":"Read the persisted hardware-web-evidence pages from search-hardware-web in full. Search Content/snippets/provider official labels are not complete official pages or proof of authority. Extract only manufacturer pages; uncertain source authority remains unknown and third-party mirrors are not official merely because their URL contains a manufacturer domain. Reply {\"candidates\":[{\"slot_id\":\"original slot\",\"page_id\":\"persisted page ID\",\"manufacturer\":\"exact manufacturer\",\"manufacturer_quote\":\"at least 8 source characters\",\"model\":\"exact model\",\"model_quote\":\"at least 8 source characters\",\"parts\":[{\"name\":\"physical part name\",\"name_quote\":\"exact source quote\",\"shape\":\"box|cylinder|sphere|unknown\",\"shape_quote\":\"exact source quote\",\"dimensions_mm\":{\"length\":20,\"width\":12,\"height\":3},\"dimension_quotes\":{\"length\":\"exact quote identifying this part, axis, numeric value and unit\",\"width\":\"exact quote\",\"height\":\"exact quote\"}}]}]}. Quotes must include the exact part/name/shape they support. Each physical part has separate dimensions; cylinders use diameter/height, spheres use diameter. Unknown dimensions are omitted, never invented or defaulted. Conflicting versions and unknown multi-part overall dimensions remain unknown; do not combine contradictory versions. Do not submit page bodies, official/verified/CAD_available/source/geometry claims. Missing reliable pages or no network means candidates empty. This is envelope_only, not true component CAD or engineering verification. For an attributed tuple such as Back Panel: 48mm x 32mm x 0.5mm, add dimensions_quote with the entire exact source string and dimension_axes:[\"length\",\"width\",\"height\"] in original order; dimensions_mm must map each original value/unit to that explicitly declared axis. Preserve alternate imperial tuples in the quote; never use their values as mm or borrow another part's measurements. A 2-value tuple leaves height unknown. A box inferred from dimensions is only an envelope expression: actual part shape and orientation remain unknown. dimension_quotes may be empty for this tuple mode. Never invent coil thickness or total assembly dimensions.","replySchema":{"candidates":"array"}},{"action":"capability.run","args":{"capability":"hardware.web-merge","input":{"candidates":"{{steps.extract-web-hardware.result.candidates}}","evidence_id":"{{steps.search-hardware-web.resource.id}}","recall_id":"{{steps.search-hardware-wikis.resource.id}}","requirements":"{{input.requirements}}","slots":"{{steps.classify-hardware.result.slots}}"}},"executor":"cli","id":"merge-hardware-web"},{"executor":"agent","id":"select-hardware-from-wikis","instruction":"先读 abelien-hardware-selection/references/selection-service-contract.md 与真实候选的完整 Wiki。每槽位选择一个真实 component_id，显式 quantity 等于槽位 quantity；manufacturer/model 取候选，selection_reason 非空，wiki_evidence 为至少 8 字符的 Wiki 原文引用数组。selected_models 每项需 constraint_checks，覆盖 function、slot:<hard_constraints 的键>、limit:<每项 hard limit.id>；每项包含 constraint_id、status=verified|unknown|incompatible、reason、evidence:[{component_id,quote}]。多型号另给 compatibility_checks，逐 power/interfaces/mechanical/thermal/software 维度包含 status、reason、每个型号的原文 evidence。证据不足填 unknown，不可编造。status=verified|needs_confirmation，plan_mode=assemble_new|adapt_system，其余数组 selected_models/coverage_ledger/remaining_slots/unknowns/replacement_plan 必填。先比较整机，但整机继承缺 manifest 必须待确认，不凭文案抵扣数量。verified 只表示 Wiki 证据判断通过，不是独立工程兼容求解或实测，不代表采用。 Read only merge-hardware-web candidates for the final choice. Whole-system reuse is optional; a poor match never forces a complex baseline. External IDs are external:<hash>, with source authority and engineering unknowns; envelopes are not component CAD and cannot grant adoption or delivery.","replySchema":{"compatibility_checks":"array","coverage_ledger":"array","plan_mode":"adapt_system|assemble_new","remaining_slots":"array","replacement_plan":"array","selected_models":"array","status":"verified|needs_confirmation","unknowns":"array"}},{"action":"capability.run","args":{"capability":"hardware.select","input":{"recall_id":"{{steps.merge-hardware-web.resource.id}}","requirements":"{{input.requirements}}","selection_proposal":"{{steps.select-hardware-from-wikis.result}}","slots":"{{steps.classify-hardware.result.slots}}"}},"executor":"cli","id":"select-hardware"},{"action":"resource.update","args":{"bodyPatch":{"hardwarePlanMode":"{{steps.select-hardware.result.plan_mode}}","hardwareSelectionId":"{{steps.select-hardware.resource.id}}","hardwareSelectionRevision":"{{steps.select-hardware.result.revision}}","hardwareSelectionStatus":"{{steps.select-hardware.result.status}}"},"id":"{{steps.record-requirements.resource.id}}"},"executor":"cli","id":"record-hardware-selection"},{"action":"machine.send","args":{"event":"confirmSelection","instance":"{{steps.record-requirements.resource.id}}","machine":"hardware-selection"},"executor":"cli","id":"hardware-selected"},{"executor":"agent","id":"research-algorithms","instruction":"硬件选型已完成。读取同级 abelien-algorithm/SKILL.md 和 references/research-policy.md，并从 context-json 的 select-hardware.resource 读取准确厂商、型号、能力和 Wiki 证据。针对 input.reactions 先检索硬件厂商官方资料，再检索算法或模型官方资料与 Hugging Face；端侧不满足且用户允许联网时才比较成熟云服务。选择每个 reaction 的最合适实现并回复 {\"bindings\":[...],\"candidates\":[...],\"sources\":[...],\"unavailable_sources\":[...],\"unknowns\":[...],\"blocking_unknowns\":[...]}；来源必须回读，binding 必须明确 edge、cloud 或 hybrid。","replySchema":{"bindings":"array","blocking_unknowns":"array","candidates":"array","sources":"array","unavailable_sources":"array","unknowns":"array"}},{"action":"capability.run","args":{"capability":"algorithm.finalize","input":{"hardware_selection_id":"{{steps.select-hardware.resource.id}}","hardware_selection_revision":"{{steps.select-hardware.result.revision}}","operation":"select","reactions":"{{input.reactions}}","requirements":"{{input.requirements}}","research":"{{steps.research-algorithms.result}}"}},"executor":"cli","id":"select-algorithms"},{"action":"machine.send","args":{"event":"confirmSelection","instance":"{{steps.select-algorithms.resource.id}}","machine":"algorithm-selection"},"executor":"cli","id":"algorithm-selected"},{"action":"resource.update","args":{"bodyPatch":{"algorithmSelectionId":"{{steps.select-algorithms.resource.id}}","algorithmSelectionRevision":"{{steps.select-algorithms.result.revision}}","algorithmSelectionStatus":"{{steps.select-algorithms.result.status}}"},"id":"{{steps.record-requirements.resource.id}}"},"executor":"cli","id":"record-algorithm-selection"}]}