@zzz0350/ozon-listing-workbench 0.5.0 → 1.0.0

package/versions/0.5.0/_internal/_tk_data/button.tcl

@@ -1,782 +0,0 @@
-# button.tcl --
-#
-# This file defines the default bindings for Tk label, button,
-# checkbutton, and radiobutton widgets and provides procedures
-# that help in implementing those bindings.
-#
-# Copyright (c) 1992-1994 The Regents of the University of California.
-# Copyright (c) 1994-1996 Sun Microsystems, Inc.
-# Copyright (c) 2002 ActiveState Corporation.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-
-#-------------------------------------------------------------------------
-# The code below creates the default class bindings for buttons.
-#-------------------------------------------------------------------------
-
-if {[tk windowingsystem] eq "aqua"} {
-
-    bind Radiobutton <Enter> {
-	tk::ButtonEnter %W
-    }
-    bind Radiobutton <1> {
-	tk::ButtonDown %W
-    }
-    bind Radiobutton <ButtonRelease-1> {
-	tk::ButtonUp %W
-    }
-    bind Checkbutton <Enter> {
-	tk::ButtonEnter %W
-    }
-    bind Checkbutton <1> {
-	tk::ButtonDown %W
-    }
-    bind Checkbutton <ButtonRelease-1> {
-	tk::ButtonUp %W
-    }
-    bind Checkbutton <Leave> {
-	tk::ButtonLeave %W
-    }
-}
-if {"win32" eq [tk windowingsystem]} {
-    bind Checkbutton <equal> {
-	tk::CheckRadioInvoke %W select
-    }
-    bind Checkbutton <plus> {
-	tk::CheckRadioInvoke %W select
-    }
-    bind Checkbutton <minus> {
-	tk::CheckRadioInvoke %W deselect
-    }
-    bind Checkbutton <1> {
-	tk::CheckRadioDown %W
-    }
-    bind Checkbutton <ButtonRelease-1> {
-	tk::ButtonUp %W
-    }
-    bind Checkbutton <Enter> {
-	tk::CheckRadioEnter %W
-    }
-    bind Checkbutton <Leave> {
-	tk::ButtonLeave %W
-    }
-
-    bind Radiobutton <1> {
-	tk::CheckRadioDown %W
-    }
-    bind Radiobutton <ButtonRelease-1> {
-	tk::ButtonUp %W
-    }
-    bind Radiobutton <Enter> {
-	tk::CheckRadioEnter %W
-    }
-}
-if {"x11" eq [tk windowingsystem]} {
-    bind Checkbutton <Return> {
-	if {!$tk_strictMotif} {
-	    tk::CheckInvoke %W
-	}
-    }
-    bind Radiobutton <Return> {
-	if {!$tk_strictMotif} {
-	    tk::CheckRadioInvoke %W
-	}
-    }
-    bind Checkbutton <1> {
-	tk::CheckInvoke %W
-    }
-    bind Radiobutton <1> {
-	tk::CheckRadioInvoke %W
-    }
-    bind Checkbutton <Enter> {
-	tk::CheckEnter %W
-    }
-    bind Radiobutton <Enter> {
-	tk::ButtonEnter %W
-    }
-    bind Checkbutton <Leave> {
-	tk::CheckLeave %W
-    }
-}
-
-bind Button <space> {
-    tk::ButtonInvoke %W
-}
-bind Checkbutton <space> {
-    tk::CheckRadioInvoke %W
-}
-bind Radiobutton <space> {
-    tk::CheckRadioInvoke %W
-}
-bind Button <<Invoke>> {
-    tk::ButtonInvoke %W
-}
-bind Checkbutton <<Invoke>> {
-    tk::CheckRadioInvoke %W
-}
-bind Radiobutton <<Invoke>> {
-    tk::CheckRadioInvoke %W
-}
-
-bind Button <FocusIn> {}
-bind Button <Enter> {
-    tk::ButtonEnter %W
-}
-bind Button <Leave> {
-    tk::ButtonLeave %W
-}
-bind Button <1> {
-    tk::ButtonDown %W
-}
-bind Button <ButtonRelease-1> {
-    tk::ButtonUp %W
-}
-
-bind Checkbutton <FocusIn> {}
-
-bind Radiobutton <FocusIn> {}
-bind Radiobutton <Leave> {
-    tk::ButtonLeave %W
-}
-
-if {"win32" eq [tk windowingsystem]} {
-
-#########################
-# Windows implementation
-#########################
-
-# ::tk::ButtonEnter --
-# The procedure below is invoked when the mouse pointer enters a
-# button widget.  It records the button we're in and changes the
-# state of the button to active unless the button is disabled.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonEnter w {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-
-	# If the mouse button is down, set the relief to sunken on entry.
-	# Overwise, if there's an -overrelief value, set the relief to that.
-
-	set Priv($w,relief) [$w cget -relief]
-	if {$Priv(buttonWindow) eq $w} {
-	    $w configure -relief sunken -state active
-	    set Priv($w,prelief) sunken
-	} elseif {[set over [$w cget -overrelief]] ne ""} {
-	    $w configure -relief $over
-	    set Priv($w,prelief) $over
-	}
-    }
-    set Priv(window) $w
-}
-
-# ::tk::ButtonLeave --
-# The procedure below is invoked when the mouse pointer leaves a
-# button widget.  It changes the state of the button back to inactive.
-# Restore any modified relief too.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonLeave w {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	$w configure -state normal
-    }
-
-    # Restore the original button relief if it was changed by Tk.
-    # That is signaled by the existence of Priv($w,prelief).
-
-    if {[info exists Priv($w,relief)]} {
-	if {[info exists Priv($w,prelief)] && \
-		$Priv($w,prelief) eq [$w cget -relief]} {
-	    $w configure -relief $Priv($w,relief)
-	}
-	unset -nocomplain Priv($w,relief) Priv($w,prelief)
-    }
-
-    set Priv(window) ""
-}
-
-# ::tk::ButtonDown --
-# The procedure below is invoked when the mouse button is pressed in
-# a button widget.  It records the fact that the mouse is in the button,
-# saves the button's relief so it can be restored later, and changes
-# the relief to sunken.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonDown w {
-    variable ::tk::Priv
-
-    # Only save the button's relief if it does not yet exist.  If there
-    # is an overrelief setting, Priv($w,relief) will already have been set,
-    # and the current value of the -relief option will be incorrect.
-
-    if {![info exists Priv($w,relief)]} {
-	set Priv($w,relief) [$w cget -relief]
-    }
-
-    if {[$w cget -state] ne "disabled"} {
-	set Priv(buttonWindow) $w
-	$w configure -relief sunken -state active
-	set Priv($w,prelief) sunken
-
-	# If this button has a repeatdelay set up, get it going with an after
-	after cancel $Priv(afterId)
-	set delay [$w cget -repeatdelay]
-	set Priv(repeated) 0
-	if {$delay > 0} {
-	    set Priv(afterId) [after $delay [list tk::ButtonAutoInvoke $w]]
-	}
-    }
-}
-
-# ::tk::ButtonUp --
-# The procedure below is invoked when the mouse button is released
-# in a button widget.  It restores the button's relief and invokes
-# the command as long as the mouse hasn't left the button.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonUp w {
-    variable ::tk::Priv
-    if {$Priv(buttonWindow) eq $w} {
-	set Priv(buttonWindow) ""
-
-	# Restore the button's relief if it was cached.
-
-	if {[info exists Priv($w,relief)]} {
-	    if {[info exists Priv($w,prelief)] && \
-		    $Priv($w,prelief) eq [$w cget -relief]} {
-		$w configure -relief $Priv($w,relief)
-	    }
-	    unset -nocomplain Priv($w,relief) Priv($w,prelief)
-	}
-
-	# Clean up the after event from the auto-repeater
-	after cancel $Priv(afterId)
-
-	if {$Priv(window) eq $w && [$w cget -state] ne "disabled"} {
-	    $w configure -state normal
-
-	    # Only invoke the command if it wasn't already invoked by the
-	    # auto-repeater functionality
-	    if { $Priv(repeated) == 0 } {
-		uplevel #0 [list $w invoke]
-	    }
-	}
-    }
-}
-
-# ::tk::CheckRadioEnter --
-# The procedure below is invoked when the mouse pointer enters a
-# checkbutton or radiobutton widget.  It records the button we're in
-# and changes the state of the button to active unless the button is
-# disabled.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::CheckRadioEnter w {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	if {$Priv(buttonWindow) eq $w} {
-	    $w configure -state active
-	}
-	if {[set over [$w cget -overrelief]] ne ""} {
-	    set Priv($w,relief)  [$w cget -relief]
-	    set Priv($w,prelief) $over
-	    $w configure -relief $over
-	}
-    }
-    set Priv(window) $w
-}
-
-# ::tk::CheckRadioDown --
-# The procedure below is invoked when the mouse button is pressed in
-# a button widget.  It records the fact that the mouse is in the button,
-# saves the button's relief so it can be restored later, and changes
-# the relief to sunken.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::CheckRadioDown w {
-    variable ::tk::Priv
-    if {![info exists Priv($w,relief)]} {
-	set Priv($w,relief) [$w cget -relief]
-    }
-    if {[$w cget -state] ne "disabled"} {
-	set Priv(buttonWindow) $w
-	set Priv(repeated) 0
-	$w configure -state active
-    }
-}
-
-}
-
-if {"x11" eq [tk windowingsystem]} {
-
-#####################
-# Unix implementation
-#####################
-
-# ::tk::ButtonEnter --
-# The procedure below is invoked when the mouse pointer enters a
-# button widget.  It records the button we're in and changes the
-# state of the button to active unless the button is disabled.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonEnter {w} {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	# On unix the state is active just with mouse-over
-	$w configure -state active
-
-	# If the mouse button is down, set the relief to sunken on entry.
-	# Overwise, if there's an -overrelief value, set the relief to that.
-
-	set Priv($w,relief) [$w cget -relief]
-	if {$Priv(buttonWindow) eq $w} {
-	    $w configure -relief sunken
-	    set Priv($w,prelief) sunken
-	} elseif {[set over [$w cget -overrelief]] ne ""} {
-	    $w configure -relief $over
-	    set Priv($w,prelief) $over
-	}
-    }
-    set Priv(window) $w
-}
-
-# ::tk::ButtonLeave --
-# The procedure below is invoked when the mouse pointer leaves a
-# button widget.  It changes the state of the button back to inactive.
-# Restore any modified relief too.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonLeave w {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	$w configure -state normal
-    }
-
-    # Restore the original button relief if it was changed by Tk.
-    # That is signaled by the existence of Priv($w,prelief).
-
-    if {[info exists Priv($w,relief)]} {
-	if {[info exists Priv($w,prelief)] && \
-		$Priv($w,prelief) eq [$w cget -relief]} {
-	    $w configure -relief $Priv($w,relief)
-	}
-	unset -nocomplain Priv($w,relief) Priv($w,prelief)
-    }
-
-    set Priv(window) ""
-}
-
-# ::tk::ButtonDown --
-# The procedure below is invoked when the mouse button is pressed in
-# a button widget.  It records the fact that the mouse is in the button,
-# saves the button's relief so it can be restored later, and changes
-# the relief to sunken.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonDown w {
-    variable ::tk::Priv
-
-    # Only save the button's relief if it does not yet exist.  If there
-    # is an overrelief setting, Priv($w,relief) will already have been set,
-    # and the current value of the -relief option will be incorrect.
-
-    if {![info exists Priv($w,relief)]} {
-	set Priv($w,relief) [$w cget -relief]
-    }
-
-    if {[$w cget -state] ne "disabled"} {
-	set Priv(buttonWindow) $w
-	$w configure -relief sunken
-	set Priv($w,prelief) sunken
-
-	# If this button has a repeatdelay set up, get it going with an after
-	after cancel $Priv(afterId)
-	set delay [$w cget -repeatdelay]
-	set Priv(repeated) 0
-	if {$delay > 0} {
-	    set Priv(afterId) [after $delay [list tk::ButtonAutoInvoke $w]]
-	}
-    }
-}
-
-# ::tk::ButtonUp --
-# The procedure below is invoked when the mouse button is released
-# in a button widget.  It restores the button's relief and invokes
-# the command as long as the mouse hasn't left the button.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonUp w {
-    variable ::tk::Priv
-    if {$w eq $Priv(buttonWindow)} {
-	set Priv(buttonWindow) ""
-
-	# Restore the button's relief if it was cached.
-
-	if {[info exists Priv($w,relief)]} {
-	    if {[info exists Priv($w,prelief)] && \
-		    $Priv($w,prelief) eq [$w cget -relief]} {
-		$w configure -relief $Priv($w,relief)
-	    }
-	    unset -nocomplain Priv($w,relief) Priv($w,prelief)
-	}
-
-	# Clean up the after event from the auto-repeater
-	after cancel $Priv(afterId)
-
-	if {$Priv(window) eq $w && [$w cget -state] ne "disabled"} {
-	    # Only invoke the command if it wasn't already invoked by the
-	    # auto-repeater functionality
-	    if { $Priv(repeated) == 0 } {
-		uplevel #0 [list $w invoke]
-	    }
-	}
-    }
-}
-
-}
-
-if {[tk windowingsystem] eq "aqua"} {
-
-####################
-# Mac implementation
-####################
-
-# ::tk::ButtonEnter --
-# The procedure below is invoked when the mouse pointer enters a
-# button widget.  It records the button we're in and changes the
-# state of the button to active unless the button is disabled.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonEnter {w} {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-
-	# If there's an -overrelief value, set the relief to that.
-
-	if {$Priv(buttonWindow) eq $w} {
-	    $w configure -state active
-	} elseif {[set over [$w cget -overrelief]] ne ""} {
-	    set Priv($w,relief)  [$w cget -relief]
-	    set Priv($w,prelief) $over
-	    $w configure -relief $over
-	}
-    }
-    set Priv(window) $w
-}
-
-# ::tk::ButtonLeave --
-# The procedure below is invoked when the mouse pointer leaves a
-# button widget.  It changes the state of the button back to
-# inactive.  If we're leaving the button window with a mouse button
-# pressed (Priv(buttonWindow) == $w), restore the relief of the
-# button too.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonLeave w {
-    variable ::tk::Priv
-    if {$w eq $Priv(buttonWindow)} {
-	$w configure -state normal
-    }
-
-    # Restore the original button relief if it was changed by Tk.
-    # That is signaled by the existence of Priv($w,prelief).
-
-    if {[info exists Priv($w,relief)]} {
-	if {[info exists Priv($w,prelief)] && \
-		$Priv($w,prelief) eq [$w cget -relief]} {
-	    $w configure -relief $Priv($w,relief)
-	}
-	unset -nocomplain Priv($w,relief) Priv($w,prelief)
-    }
-
-    set Priv(window) ""
-}
-
-# ::tk::ButtonDown --
-# The procedure below is invoked when the mouse button is pressed in
-# a button widget.  It records the fact that the mouse is in the button,
-# saves the button's relief so it can be restored later, and changes
-# the relief to sunken.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonDown w {
-    variable ::tk::Priv
-
-    if {[$w cget -state] ne "disabled"} {
-	set Priv(buttonWindow) $w
-	$w configure -state active
-
-	# If this button has a repeatdelay set up, get it going with an after
-	after cancel $Priv(afterId)
-	set Priv(repeated) 0
-	if { ![catch {$w cget -repeatdelay} delay] } {
-	    if {$delay > 0} {
-		set Priv(afterId) [after $delay [list tk::ButtonAutoInvoke $w]]
-	    }
-	}
-    }
-}
-
-# ::tk::ButtonUp --
-# The procedure below is invoked when the mouse button is released
-# in a button widget.  It restores the button's relief and invokes
-# the command as long as the mouse hasn't left the button.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonUp w {
-    variable ::tk::Priv
-    if {$Priv(buttonWindow) eq $w} {
-	set Priv(buttonWindow) ""
-	$w configure -state normal
-
-	# Restore the button's relief if it was cached.
-
-	if {[info exists Priv($w,relief)]} {
-	    if {[info exists Priv($w,prelief)] && \
-		    $Priv($w,prelief) eq [$w cget -relief]} {
-		$w configure -relief $Priv($w,relief)
-	    }
-	    unset -nocomplain Priv($w,relief) Priv($w,prelief)
-	}
-
-	# Clean up the after event from the auto-repeater
-	after cancel $Priv(afterId)
-
-	if {$Priv(window) eq $w && [$w cget -state] ne "disabled"} {
-	    # Only invoke the command if it wasn't already invoked by the
-	    # auto-repeater functionality
-	    if { $Priv(repeated) == 0 } {
-		uplevel #0 [list $w invoke]
-	    }
-	}
-    }
-}
-
-}
-
-##################
-# Shared routines
-##################
-
-# ::tk::ButtonInvoke --
-# The procedure below is called when a button is invoked through
-# the keyboard.  It simulate a press of the button via the mouse.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::ButtonInvoke w {
-    if {[winfo exists $w] && [$w cget -state] ne "disabled"} {
-	set oldRelief [$w cget -relief]
-	set oldState [$w cget -state]
-	$w configure -state active -relief sunken
-	after 100 [list ::tk::ButtonInvokeEnd $w $oldState $oldRelief]
-    }
-}
-
-# ::tk::ButtonInvokeEnd --
-# The procedure below is called after a button is invoked through
-# the keyboard.  It simulate a release of the button via the mouse.
-#
-# Arguments:
-# w -         The name of the widget.
-# oldState -  Old state to be set back.
-# oldRelief - Old relief to be set back.
-
-proc ::tk::ButtonInvokeEnd {w oldState oldRelief} {
-    if {[winfo exists $w]} {
-	$w configure -state $oldState -relief $oldRelief
-	uplevel #0 [list $w invoke]
-    }
-}
-
-# ::tk::ButtonAutoInvoke --
-#
-#	Invoke an auto-repeating button, and set it up to continue to repeat.
-#
-# Arguments:
-#	w	button to invoke.
-#
-# Results:
-#	None.
-#
-# Side effects:
-#	May create an after event to call ::tk::ButtonAutoInvoke.
-
-proc ::tk::ButtonAutoInvoke {w} {
-    variable ::tk::Priv
-    after cancel $Priv(afterId)
-    set delay [$w cget -repeatinterval]
-    if {$Priv(window) eq $w} {
-	incr Priv(repeated)
-	uplevel #0 [list $w invoke]
-    }
-    if {$delay > 0} {
-	set Priv(afterId) [after $delay [list tk::ButtonAutoInvoke $w]]
-    }
-}
-
-# ::tk::CheckRadioInvoke --
-# The procedure below is invoked when the mouse button is pressed in
-# a checkbutton or radiobutton widget, or when the widget is invoked
-# through the keyboard.  It invokes the widget if it
-# isn't disabled.
-#
-# Arguments:
-# w -		The name of the widget.
-# cmd -		The subcommand to invoke (one of invoke, select, or deselect).
-
-proc ::tk::CheckRadioInvoke {w {cmd invoke}} {
-    if {[$w cget -state] ne "disabled"} {
-	uplevel #0 [list $w $cmd]
-    }
-}
-
-# Special versions of the handlers for checkbuttons on Unix that do the magic
-# to make things work right when the checkbutton indicator is hidden;
-# radiobuttons don't need this complexity.
-
-# ::tk::CheckInvoke --
-# The procedure below invokes the checkbutton, like ButtonInvoke, but handles
-# what to do when the checkbutton indicator is missing. Only used on Unix.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::CheckInvoke {w} {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	# Additional logic to switch the "selected" colors around if necessary
-	# (when we're indicator-less).
-
-	if {![$w cget -indicatoron] && [info exist Priv($w,selectcolor)]} {
-	    if {[$w cget -selectcolor] eq $Priv($w,aselectcolor)} {
-		$w configure -selectcolor $Priv($w,selectcolor)
-	    } else {
-		$w configure -selectcolor $Priv($w,aselectcolor)
-	    }
-	}
-	uplevel #0 [list $w invoke]
-    }
-}
-
-# ::tk::CheckEnter --
-# The procedure below enters the checkbutton, like ButtonEnter, but handles
-# what to do when the checkbutton indicator is missing. Only used on Unix.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::CheckEnter {w} {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	# On unix the state is active just with mouse-over
-	$w configure -state active
-
-	# If the mouse button is down, set the relief to sunken on entry.
-	# Overwise, if there's an -overrelief value, set the relief to that.
-
-	set Priv($w,relief) [$w cget -relief]
-	if {$Priv(buttonWindow) eq $w} {
-	    $w configure -relief sunken
-	    set Priv($w,prelief) sunken
-	} elseif {[set over [$w cget -overrelief]] ne ""} {
-	    $w configure -relief $over
-	    set Priv($w,prelief) $over
-	}
-
-	# Compute what the "selected and active" color should be.
-
-	if {![$w cget -indicatoron] && [$w cget -selectcolor] ne ""} {
-	    set Priv($w,selectcolor) [$w cget -selectcolor]
-	    lassign [winfo rgb $w [$w cget -selectcolor]]      r1 g1 b1
-	    lassign [winfo rgb $w [$w cget -activebackground]] r2 g2 b2
-	    set Priv($w,aselectcolor) \
-		[format "#%04x%04x%04x" [expr {($r1+$r2)/2}] \
-		     [expr {($g1+$g2)/2}] [expr {($b1+$b2)/2}]]
-	    # use uplevel to work with other var resolvers
-	    if {[uplevel #0 [list set [$w cget -variable]]]
-		 eq [$w cget -onvalue]} {
-		$w configure -selectcolor $Priv($w,aselectcolor)
-	    }
-	}
-    }
-    set Priv(window) $w
-}
-
-# ::tk::CheckLeave --
-# The procedure below leaves the checkbutton, like ButtonLeave, but handles
-# what to do when the checkbutton indicator is missing. Only used on Unix.
-#
-# Arguments:
-# w -		The name of the widget.
-
-proc ::tk::CheckLeave {w} {
-    variable ::tk::Priv
-    if {[$w cget -state] ne "disabled"} {
-	$w configure -state normal
-    }
-
-    # Restore the original button "selected" color; but only if the user
-    # has not changed it in the meantime.
-
-    if {![$w cget -indicatoron] && [info exist Priv($w,selectcolor)]} {
-        if {[$w cget -selectcolor] eq $Priv($w,selectcolor)
-                || ([info exist Priv($w,aselectcolor)] &&
-                    [$w cget -selectcolor] eq $Priv($w,aselectcolor))} {
-	    $w configure -selectcolor $Priv($w,selectcolor)
-	}
-    }
-    unset -nocomplain Priv($w,selectcolor) Priv($w,aselectcolor)
-
-    # Restore the original button relief if it was changed by Tk. That is
-    # signaled by the existence of Priv($w,prelief).
-
-    if {[info exists Priv($w,relief)]} {
-	if {[info exists Priv($w,prelief)] && \
-		$Priv($w,prelief) eq [$w cget -relief]} {
-	    $w configure -relief $Priv($w,relief)
-	}
-	unset -nocomplain Priv($w,relief) Priv($w,prelief)
-    }
-
-    set Priv(window) ""
-}
-
-return
-
-# Local Variables:
-# mode: tcl
-# fill-column: 78
-# End: