@zwave-js/config 9.6.0 → 10.0.0-beta.1

package/config/devices/0x0063/26932_26933_zw3008.json

@@ -31,297 +31,79 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Timeout Duration",
-			"description": "Amount of time the light stays on after motion stops",
-			"unit": "seconds",
-			"valueSize": 1,
-			"defaultValue": 5,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Test (5s)",
-					"value": 0
-				},
-				{
-					"label": "1 minute",
-					"value": 1
-				},
-				{
-					"label": "5 minutes",
-					"value": 5
-				},
-				{
-					"label": "15 minutes",
-					"value": 15
-				},
-				{
-					"label": "30 minutes",
-					"value": 30
-				},
-				{
-					"label": "Disable timeout",
-					"value": 255
-				}
-			]
+			"$import": "templates/jasco_template.json#timeout_duration"
 		},
 		{
 			"#": "2",
-			"label": "Associated Dim Level",
-			"description": "Brightness of associated light(s)",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 255,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dim_level"
 		},
 		{
 			"#": "3",
-			"label": "Operation Mode",
-			"description": "Sets how the light responds to motion",
-			"valueSize": 1,
-			"defaultValue": 3,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Manual",
-					"value": 1
-				},
-				{
-					"label": "Vacancy",
-					"value": 2
-				},
-				{
-					"label": "Occupancy",
-					"value": 3
-				}
-			]
+			"$import": "templates/jasco_template.json#operation_mode"
 		},
 		{
 			"#": "4",
-			"label": "Association Mode",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#association_mode"
 		},
 		{
 			"#": "5",
-			"label": "Invert Switch",
-			"description": "In a 3-way configuration, invert the connected Add-On Switch buttons",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation"
 		},
 		{
 			"#": "6",
-			"label": "Motion Sensor",
-			"description": "Enable/Disable Motion Sensor",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#motion_sensor"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		},
 		{
 			"#": "13",
-			"label": "Motion Sensor Sensitivity",
-			"description": "Sets the amount of motion required to trigger the motion sensor.",
-			"valueSize": 1,
-			"defaultValue": 2,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "High",
-					"value": 1
-				},
-				{
-					"label": "Medium",
-					"value": 2
-				},
-				{
-					"label": "Low",
-					"value": 3
-				}
-			]
+			"$import": "templates/jasco_template.json#motion_sensitivity"
 		},
 		{
 			"#": "14",
-			"label": "Light Sensing",
-			"description": "Enable/Disable whether motion sensor only turns light on if room is dark",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#light_sensor"
 		},
 		{
 			"#": "15",
-			"label": "Reset Cycle",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 110,
-			"defaultValue": 2
+			"$import": "templates/jasco_template.json#reset_cycle"
 		},
 		{
 			"#": "16",
-			"label": "Switch Mode",
-			"description": "Enable / Disable plain switch functionality",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#switch_mode"
 		},
 		{
 			"#": "17",
-			"label": "Switch Level",
-			"description": "Set power level for plain switch functionality",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 0
+			"$import": "templates/jasco_template.json#switch_level"
 		},
 		{
 			"#": "18",
-			"label": "Dim Up Rate",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Dim up the light quickly",
-					"value": 0
-				},
-				{
-					"label": "Dim up the light to the default level slowly",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#dim_rate"
 		},
 		{
 			"#": "19",
-			"label": "Exclusion mode",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Press and release any button",
-					"value": 0
-				},
-				{
-					"label": "Press & release “X” btn & then “ON“ btn",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#alternate_exclusion"
 		}
 	],
 	// Add compat flag to re-enable basic command events to replicate central scene functionality.

package/config/devices/0x0063/28166_zw3104.json

@@ -33,109 +33,36 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "LED Light",
-			"description": "LED status when device on or off.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED ON when load is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED On when light is turned On",
-					"value": 1
-				},
-				{
-					"label": "LED always OFF",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "6",
 			"$if": "firmwareVersion >= 5.21",
-			"label": "Smooth Level Changes",
-			"valueSize": 1,
-			"unsigned": true,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
+			"$import": "templates/jasco_template.json#smooth_level_changes"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		}
 	],
 	"compat": {

package/config/devices/0x0063/28170_zw3105.json

@@ -33,90 +33,31 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "LED Light",
-			"description": "LED status when device on or off.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED ON when load is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED On when light is turned On",
-					"value": 1
-				},
-				{
-					"label": "LED always OFF",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		}
 	],
 	"compat": {

package/config/devices/0x0063/28171_zw3105.json

@@ -17,87 +17,31 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "LED Light",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when switch is off",
-					"value": 0
-				},
-				{
-					"label": "LED on when switch is on",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		},
 		{
 			"#": "7",
-			"label": "Dim Rate Steps (Z-Wave Command)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
 		},
 		{
 			"#": "8",
-			"label": "Dim Rate Timing (Z-Wave)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_z"
 		},
 		{
 			"#": "9",
-			"label": "Dim Rate Steps (Manual)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps"
 		},
 		{
 			"#": "10",
-			"label": "Dim Rate Timing (Manual)",
-			"description": "Timing of steps",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times"
 		},
 		{
 			"#": "11",
-			"label": "Dim Rate Steps (All-On/All-Off)",
-			"description": "Number of steps or levels",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
 		},
 		{
 			"#": "12",
-			"label": "Dim Rate Timing (All-On/All-Off)",
-			"description": "Timing of steps or levels",
-			"valueSize": 2,
-			"unit": "10ms",
-			"minValue": 1,
-			"maxValue": 255,
-			"defaultValue": 3,
-			"unsigned": true
+			"$import": "templates/jasco_template.json#dimmer_times_a"
 		}
 	],
 	"metadata": {

package/config/devices/0x0063/28172_zw4104.json

@@ -38,26 +38,7 @@
 	"paramInformation": [
 		{
 			"#": "3",
-			"label": "LED Light",
-			"description": "LED status when device on or off.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED ON when load is OFF",
-					"value": 0
-				},
-				{
-					"label": "LED On when light is turned On",
-					"value": 1
-				},
-				{
-					"label": "LED always OFF",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		}
 	],
 	"compat": {