@zwave-js/config 9.0.0-beta.4 → 9.0.0-beta.6

package/config/devices/0x010f/fgs224.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "FIBARO System",
+	"manufacturer": "Fibargroup",
 	"manufacturerId": "0x010f",
 	"label": "FGS224",
 	"description": "Double Smart Module",
@@ -35,38 +35,34 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Remember relays state",
-			"description": "This parameter determines the state of relays power supply failure (e.g. power outage). auto OFF and flashing modes the parameter not relevant and the relay will always remain off.",
+			"label": "Relays State After Power Failure",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
 			"defaultValue": 1,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Relays remain switched off after restoring power",
+					"label": "Always off",
 					"value": 0
 				},
 				{
-					"label": "Restore remembered state of relays after restoring power",
+					"label": "Previous state",
 					"value": 1
 				},
 				{
-					"label": "Restore remembered state of relays after restoring power, but for toggle switches (parameter 20/21 set to 1) set the same state as the current state of the switches",
+					"label": "Toggle switch (synchronize output): current switch state / Other switch types: previous state",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "20",
-			"label": "S1 input – switch type",
-			"description": "S1 - Inputs type configuration",
+			"label": "S1 Input – Switch Type",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
-			"defaultValue": 2,
-			"unsigned": true,
+			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
@@ -74,24 +70,22 @@
 					"value": 0
 				},
 				{
-					"label": "Toggle switch (contact closed - On, contact opened - OFF)",
+					"label": "Toggle switch (synchronize output)",
 					"value": 1
 				},
 				{
-					"label": "Toggle switch (device changes status when switch changes status)",
+					"label": "Toggle switch (toggle output)",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "21",
-			"label": "S2 input – switch type",
-			"description": "S2 - Inputs type configuration",
+			"label": "S2 Input – Switch Type",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
-			"defaultValue": 2,
-			"unsigned": true,
+			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
@@ -99,66 +93,246 @@
 					"value": 0
 				},
 				{
-					"label": "Toggle switch (contact closed - On, contact opened - OFF)",
+					"label": "Toggle switch (synchronize output)",
 					"value": 1
 				},
 				{
-					"label": "Toggle switch (device changes status when switch changes status)",
+					"label": "Toggle switch (toggle output)",
 					"value": 2
 				}
 			]
 		},
 		{
-			"#": "25",
-			"label": "Inputs orientation",
-			"description": "This parameter allows reversing operation of S1 and S2 inputs changing the wiring. Use in case of incorrect wiring.",
+			"#": "24",
+			"label": "Inputs Orientation",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
 			"defaultValue": 0,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "default (S1 - 1st channel, S2 - 2nd channel)",
+					"label": "Default",
 					"value": 0
 				},
 				{
-					"label": "reversed (S1 - 2nd channel, S2 - 1st channel)",
+					"label": "Reversed",
 					"value": 1
 				}
 			]
 		},
 		{
-			"#": "26",
-			"label": "Outputs orientation",
-			"description": "This parameter allows reversing operation of Q1 and Q2 outputs changing the wiring. Use in case of incorrect wiring.",
+			"#": "25",
+			"label": "Outputs Orientation",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
 			"defaultValue": 0,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "default (Q1 - 1st channel, Q2 - 2nd channel)",
+					"label": "Default",
 					"value": 0
 				},
 				{
-					"label": "reversed (Q1 - 2nd channel, Q2 - 1st channel)",
+					"label": "Reversed",
 					"value": 1
 				}
 			]
 		},
+		{
+			"#": "30[0xff000000]",
+			"$import": "templates/fibaro_template.json#alarm_configuration_notification_type",
+			"label": "Alarm Configuration – 1st Slot Notification Type",
+			"defaultValue": 0
+		},
+		{
+			"#": "30[0xff0000]",
+			"$import": "templates/fibaro_template.json#alarm_configuration_notification_event",
+			"label": "Alarm Configuration – 1st Slot Notification Status",
+			"defaultValue": 0
+		},
+		{
+			"#": "30[0xff00]",
+			"$import": "templates/fibaro_template.json#alarm_configuration_notification_event_parameter",
+			"label": "Alarm Configuration – 1st Slot Notification Event/State Parameters"
+		},
+		{
+			"#": "30[0xff]",
+			"$import": "templates/fibaro_template.json#alarm_configuration_action",
+			"label": "Alarm Configuration – 1st Slot Action",
+			"maxValue": 3,
+			"allowManualEntry": false,
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "No action",
+					"value": 0
+				},
+				{
+					"label": "Turn on",
+					"value": 1
+				},
+				{
+					"label": "Turn off",
+					"value": 2
+				},
+				{
+					"label": "Turn on/off continuously",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "31[0xff000000]",
+			"$import": "#paramInformation/30[0xff000000]",
+			"label": "Alarm Configuration – 2nd Slot Notification Type",
+			"defaultValue": 5
+		},
+		{
+			"#": "31[0xff0000]",
+			"$import": "#paramInformation/30[0xff0000]",
+			"label": "Alarm Configuration – 2nd Slot Notification Status",
+			"defaultValue": 255
+		},
+		{
+			"#": "31[0xff00]",
+			"$import": "#paramInformation/30[0xff00]",
+			"label": "Alarm Configuration – 2nd Slot Notification Event/State Parameters",
+			"defaultValue": 0
+		},
+		{
+			"#": "31[0xff]",
+			"$import": "#paramInformation/30[0xff]",
+			"label": "Alarm Configuration – 2nd Slot Action",
+			"defaultValue": 0
+		},
+		{
+			"#": "32[0xff000000]",
+			"$import": "#paramInformation/30[0xff000000]",
+			"label": "Alarm Configuration – 3rd Slot Notification Type",
+			"defaultValue": 1
+		},
+		{
+			"#": "32[0xff0000]",
+			"$import": "#paramInformation/30[0xff0000]",
+			"label": "Alarm Configuration – 3rd Slot Notification Status",
+			"defaultValue": 255
+		},
+		{
+			"#": "32[0xff00]",
+			"$import": "#paramInformation/30[0xff00]",
+			"label": "Alarm Configuration – 3rd Slot Notification Event/State Parameters",
+			"defaultValue": 0
+		},
+		{
+			"#": "32[0xff]",
+			"$import": "#paramInformation/30[0xff]",
+			"label": "Alarm Configuration – 3rd Slot Action",
+			"defaultValue": 0
+		},
+		{
+			"#": "33[0xff000000]",
+			"$import": "#paramInformation/30[0xff000000]",
+			"label": "Alarm Configuration – 4th Slot Notification Type",
+			"defaultValue": 2
+		},
+		{
+			"#": "33[0xff0000]",
+			"$import": "#paramInformation/30[0xff0000]",
+			"label": "Alarm Configuration – 4th Slot Notification Status",
+			"defaultValue": 255
+		},
+		{
+			"#": "33[0xff00]",
+			"$import": "#paramInformation/30[0xff00]",
+			"label": "Alarm Configuration – 4th Slot Notification Event/State Parameters",
+			"defaultValue": 0
+		},
+		{
+			"#": "33[0xff]",
+			"$import": "#paramInformation/30[0xff]",
+			"label": "Alarm Configuration – 4th Slot Action",
+			"defaultValue": 0
+		},
+		{
+			"#": "34[0xff000000]",
+			"$import": "#paramInformation/30[0xff000000]",
+			"label": "Alarm Configuration – 5th Slot Notification Type",
+			"defaultValue": 4
+		},
+		{
+			"#": "34[0xff0000]",
+			"$import": "#paramInformation/30[0xff0000]",
+			"label": "Alarm Configuration – 5th Slot Notification Status",
+			"defaultValue": 255
+		},
+		{
+			"#": "34[0xff00]",
+			"$import": "#paramInformation/30[0xff00]",
+			"label": "Alarm Configuration – 5th Slot Notification Event/State Parameters",
+			"defaultValue": 0
+		},
+		{
+			"#": "34[0xff]",
+			"$import": "#paramInformation/30[0xff]",
+			"label": "Alarm Configuration – 5th Slot Action",
+			"defaultValue": 0
+		},
+		{
+			"#": "35",
+			"label": "Alarm Configuration – Duration",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 32400,
+			"defaultValue": 600,
+			"options": [
+				{
+					"label": "Infinite",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "40[0x01]",
+			"$import": "templates/fibaro_template.json#send_s1_central_scene_pressed_1x"
+		},
+		{
+			"#": "40[0x02]",
+			"$import": "templates/fibaro_template.json#send_s1_central_scene_pressed_2x"
+		},
+		{
+			"#": "40[0x04]",
+			"$import": "templates/fibaro_template.json#send_s1_central_scene_pressed_3x"
+		},
+		{
+			"#": "40[0x08]",
+			"$import": "templates/fibaro_template.json#send_s1_central_scene_hold_release"
+		},
+		{
+			"#": "41[0x01]",
+			"$import": "templates/fibaro_template.json#send_s2_central_scene_pressed_1x"
+		},
+		{
+			"#": "41[0x02]",
+			"$import": "templates/fibaro_template.json#send_s2_central_scene_pressed_2x"
+		},
+		{
+			"#": "41[0x04]",
+			"$import": "templates/fibaro_template.json#send_s2_central_scene_pressed_3x"
+		},
+		{
+			"#": "41[0x08]",
+			"$import": "templates/fibaro_template.json#send_s2_central_scene_hold_release"
+		},
 		{
 			"#": "150",
-			"label": "First channel - operating mode",
-			"description": "This parameter allows to choose operating for channel controlled with Q/Q1 output. timed modes (value 1, 2 or 3), time is set parameter 154 and reaction to input is set with parameter 152.",
+			"label": "Q1 Output – Operating Mode",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 3,
 			"defaultValue": 0,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
@@ -166,11 +340,11 @@
 					"value": 0
 				},
 				{
-					"label": "Delay Off",
+					"label": "Delay off",
 					"value": 1
 				},
 				{
-					"label": "Auto Off",
+					"label": "Auto off",
 					"value": 2
 				},
 				{
@@ -181,13 +355,11 @@
 		},
 		{
 			"#": "151",
-			"label": "Second channel - operating mode",
-			"description": "This parameter allows to choose operating for channel controlled with Q/Q2 output. timed modes (value 1, 2 or 3), time is set parameter 155 and reaction to input is set with parameter 153.",
+			"label": "Q2 Output – Operating Mode",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 3,
 			"defaultValue": 0,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
@@ -195,11 +367,11 @@
 					"value": 0
 				},
 				{
-					"label": "Delay Off",
+					"label": "Delay off",
 					"value": 1
 				},
 				{
-					"label": "Auto Off",
+					"label": "Auto off",
 					"value": 2
 				},
 				{
@@ -210,13 +382,11 @@
 		},
 		{
 			"#": "152",
-			"label": "First channel - reaction to input change in delayed/auto OFF modes",
-			"description": "This parameter determines how the device when changing state of S1 input in timed for first channel.",
+			"label": "Q1 Output – Reaction to Input Change in Timed Modes",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
 			"defaultValue": 0,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
@@ -224,24 +394,22 @@
 					"value": 0
 				},
 				{
-					"label": "No reaction, mode runs until it ends",
+					"label": "Ignore, mode runs until it ends",
 					"value": 1
 				},
 				{
-					"label": "Reset timer, start counting time from the beginning",
+					"label": "Reset, start time from the beginning",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "153",
-			"label": "Second channel - reaction to input change in delayed/auto OFF modes",
-			"description": "This parameter determines how the device when changing state of S2 input in timed for second channel.",
+			"label": "Q2 Output – Reaction to Input Change in Timed Modes",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
 			"defaultValue": 0,
-			"unsigned": true,
 			"allowManualEntry": false,
 			"options": [
 				{
@@ -249,41 +417,50 @@
 					"value": 0
 				},
 				{
-					"label": "No reaction, mode runs until it ends",
+					"label": "Ignore, mode runs until it ends",
 					"value": 1
 				},
 				{
-					"label": "Reset timer, start counting time from the beginning",
+					"label": "Reset, start time from the beginning",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "154",
-			"label": "First channel – time parameter for delayed/auto OFF and flashing modes",
-			"description": "This parameter allows to set time parameter used in timed modes.",
+			"label": "Q1 Output – Time Parameter for Timed Modes",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32000,
-			"unit": "0.1 s",
+			"unit": "0.1 seconds",
 			"defaultValue": 5,
-			"unsigned": true
+			"unsigned": true,
+			"options": [
+				{
+					"label": "0.1 seconds",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "155",
-			"label": "Second channel – time parameter for delayed/auto OFF and flashing modes",
-			"description": "This parameter allows to set time parameter used in timed modes.",
+			"label": "Q2 Output – Time Parameter for Timed Modes",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 32000,
-			"unit": "0.1 s",
+			"unit": "0.1 seconds",
 			"defaultValue": 5,
-			"unsigned": true
+			"unsigned": true,
+			"options": [
+				{
+					"label": "0.1 seconds",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "156",
-			"label": "S1 Switch ON value sent to 2nd association group",
-			"description": "This parameter determines value sent with Switch On command to devices associated in 2nd association group.",
+			"label": "S1 Association: Switch On Value Sent",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -292,8 +469,7 @@
 		},
 		{
 			"#": "157",
-			"label": "S1 Switch OFF value sent to 2nd association group",
-			"description": "This parameter determines value sent with Switch Off command to devices associated in 2nd association group.",
+			"label": "S1 Association: Switch Off Value Sent",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -302,8 +478,7 @@
 		},
 		{
 			"#": "158",
-			"label": "S1 Switch Double Click value sent to 2nd association groups",
-			"description": "This parameter determines value sent with Double Click command to devices associated in 2nd association group.",
+			"label": "S1 Association: Double Click Value Sent",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -312,8 +487,7 @@
 		},
 		{
 			"#": "159",
-			"label": "S2 Switch ON value sent to 3rd association group",
-			"description": "This parameter determines value sent with Switch On command to devices associated in 3rd association group.",
+			"label": "S2 Association: Switch On Value Sent",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -322,8 +496,7 @@
 		},
 		{
 			"#": "160",
-			"label": "S2 Switch OFF value sent to 3rd association group",
-			"description": "This parameter determines value sent with Switch Off command to devices associated in 3rd association group.",
+			"label": "S2 Association: Switch Off Value Sent",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -332,8 +505,7 @@
 		},
 		{
 			"#": "161",
-			"label": "S2 Switch Double Click value sent to 3rd association groups",
-			"description": "This parameter determines value sent with Double Click command to devices associated in 3rd association group.",
+			"label": "S2 Association: Double Click Value Sent",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -342,8 +514,7 @@
 		},
 		{
 			"#": "162",
-			"label": "Q/Q1 output type",
-			"description": "This parameter determines type of Q/Q1 output.",
+			"label": "Q1 Output Type",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
@@ -352,19 +523,18 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Normally Open (relay contacts opened turned off, closed when turned on)",
+					"label": "Normally open",
 					"value": 0
 				},
 				{
-					"label": "Normally Closed (relay contacts closed turned off, opened when turned on)",
+					"label": "Normally closed",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "163",
-			"label": "Q2 output type",
-			"description": "This parameter determines type of Q2 output.",
+			"label": "Q2 Output Type",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
@@ -373,19 +543,18 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Normally Open (relay contacts opened turned off, closed when turned on)",
+					"label": "Normally open",
 					"value": 0
 				},
 				{
-					"label": "Normally Closed (relay contacts closed turned off, opened when turned on)",
+					"label": "Normally closed",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "164",
-			"label": "Lock simultaneous switching of Q1 and Q2 outputs",
-			"description": "When the lock is enabled, both outputs cannot turned on at the same time.",
+			"label": "Prevent Simultaneous Switching of Outputs",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
@@ -394,11 +563,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Lock disabled",
+					"label": "Disable",
 					"value": 0
 				},
 				{
-					"label": "Lock enabled",
+					"label": "Enable",
 					"value": 1
 				}
 			]

package/config/devices/0x010f/{fgwdseu.json → fgwdseu-221.json}

@@ -4,6 +4,10 @@
 	"label": "FGWDSEU-221",
 	"description": "Walli Double Switch",
 	"devices": [
+		{
+			"productType": "0x1a01",
+			"productId": "0x1000"
+		},
 		{
 			"productType": "0x1b01",
 			"productId": "0x1000"

package/config/devices/0x0159/zmnkad1.json

@@ -200,5 +200,10 @@
 		"exclusion": "1. Connect the device to the power supply.\n2. Make sure the device is within direct range of your Z-Wave gateway (hub) or use a hand-held Z-Wave remote to perform exclusion.\n3. Enable exclusion mode on your Z-Wave gateway (hub).\n4. Press once on button 3 – right. One press on button 4 – down for enabling full white. When full white is enabled, press, and hold button 3 – right for 5 seconds. After 5 seconds, the device starts flashing red 1 second ON, 0.5 second OFF. \nOnce the device loses node ID (after 10 seconds), it stops flashing and turns full red. The procedure is always available. \nNOTE: LEARN MODE state allows the device to receive network information from the controller",
 		"reset": "1. Connect the device to the power supply\n2. Press once on button 3 – right. One press on button 4 – down for enabling full white. When full white is enabled, press and hold button 5 – left for 10 seconds. After 10 seconds, the device starts flashing blue 1 second on, 0.5 second off. \nAfter 10 seconds the device stops flashing and turns full blue. The procedure is available always. By resetting the device, all custom parameters previously set on the device will return to their default values, and a node ID will be deleted. Use this reset procedure only when the gateway (hub) is missing or otherwise inoperable.\nNOTE: See extended manual for custom settings and parameters available for this device.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4079/Qubino%20Luxy%20Smart%20Switch%20installation%20certification.pdf"
+	},
+	"compat": {
+		// This device has two endpoints which are considered "unnecessary",
+		// but the root endpoint doesn't expose all their functionality.
+		"preserveEndpoints": "*"
 	}
 }

package/config/devices/0x027a/zen20.json

@@ -22,7 +22,7 @@
 			"#": "2",
 			"label": "Power Wattage Report Value Threshold",
 			"description": "Choose how you want your Power Strip to report power consumption to your hub",
-			"valueSize": 2,
+			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 65535,
 			"defaultValue": 5,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "9.0.0-beta.4",
+  "version": "9.0.0-beta.6",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -40,8 +40,8 @@
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "9.0.0-beta.3",
-    "@zwave-js/shared": "9.0.0-beta.2",
+    "@zwave-js/core": "9.0.0-beta.6",
+    "@zwave-js/shared": "9.0.0-beta.6",
     "alcalzone-shared": "^4.0.1",
     "ansi-colors": "^4.1.1",
     "fs-extra": "^10.0.1",
@@ -60,10 +60,10 @@
     "@types/semver": "^7.3.9",
     "@types/xml2json": "^0.11.4",
     "@types/yargs": "^17.0.9",
-    "@zwave-js/maintenance": "9.0.0-beta.3",
+    "@zwave-js/maintenance": "9.0.0-beta.6",
     "axios": "^0.26.0",
     "comment-json": "^4.2.2",
-    "esbuild": "0.14.1",
+    "esbuild": "0.14.27",
     "esbuild-register": "^3.3.2",
     "jest-extended": "^2.0.0",
     "js-levenshtein": "^1.1.6",