@zwave-js/config 8.8.3 → 8.9.0-beta.3

package/config/devices/0x0234/{zif5031_0.62.json → zif5031.json}

@@ -10,7 +10,7 @@
 		}
 	],
 	"firmwareVersion": {
-		"min": "0.62",
+		"min": "0.0",
 		"max": "255.255"
 	},
 	"associations": {

package/config/devices/0x0267/10002080-13x.json

@@ -32,6 +32,10 @@
 			"productType": "0x0004",
 			"productId": "0x0094"
 		},
+		{
+			"productType": "0x0004",
+			"productId": "0x0164"
+		},
 		{
 			"productType": "0x0004",
 			"productId": "0x0177"

package/config/devices/0x0271/xled_home_2.json

@@ -16,126 +16,258 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Time",
-			"description": "Duration of light after motion detection.",
+			"label": "Light Duration After Motion",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 5,
 			"maxValue": 900,
 			"defaultValue": 180
 		},
 		{
 			"#": "2",
-			"label": "LIGHT",
-			"description": "Light threshold [lx]",
+			"label": "Light Threshold",
+			"description": "Allowable Range: 2-2000. Moving the potentiometer overwrites the current setting.",
 			"valueSize": 2,
-			"minValue": 2,
+			"unit": "lux",
+			"minValue": 0,
 			"maxValue": 2000,
-			"defaultValue": 2000
+			"defaultValue": 2000,
+			"options": [
+				{
+					"label": "Execute learn sequence",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "5",
-			"label": "SENSITIVITY",
-			"description": "Motion Radar Sensitivity [%]",
+			"label": "Motion Sensor Sensitivity",
+			"description": "Moving the potentiometer overwrites the current setting.",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 2,
 			"maxValue": 100,
 			"defaultValue": 100
 		},
 		{
 			"#": "6",
-			"label": "BRIGHTNES MEAS 1 INTERVAL",
-			"description": "Brightness measuring interval [min]",
+			"label": "Brightness Measuring Interval",
+			"description": "Lamp switches off shortly and measures the ambient light.",
 			"valueSize": 1,
-			"minValue": 5,
+			"unit": "minutes",
+			"minValue": 0,
 			"maxValue": 120,
-			"defaultValue": 0
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "8",
-			"label": "GLOBAL_LIGHT",
-			"description": "Use external Ambient Light value",
+			"label": "External Ambient Light Sensor",
+			"description": "Measurements from associated Z-Wave light sensors are preferred if not older than 30 minutes.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "9[0x01]",
+			"label": "External Control",
+			"description": "When enabled, the lamp is controlled externally via Z-Wave and internal sensors are not used.",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
-			"defaultValue": 1
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
 		},
 		{
-			"#": "9",
-			"label": "SLAVE_MODE",
-			"description": "Disable local control",
+			"#": "9[0x02]",
+			"label": "Gateway Check",
+			"description": "External Control disabled: Lamp signalizes failure to reach the gateway. External Control enabled: Lamp falls back to normal mode after gateway could not be reached repeatedly.",
 			"valueSize": 1,
 			"minValue": 0,
-			"maxValue": 4,
-			"defaultValue": 2
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "9[0x04]",
+			"label": "Permanently On",
+			"description": "When enabled, overrides the External Control and Gateway Check parameters",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
 		},
 		{
 			"#": "10",
-			"label": "(OFF_BEHAVIOUR)",
-			"description": "Off behaviour (timeout)",
+			"label": "Z-Wave Off Command: Turn Off Duration",
+			"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
 			"defaultValue": 10,
 			"options": [
 				{
-					"label": "Lamp/relay is switched off for TIME (cfg 1)",
+					"label": "Turn off immediately, until motion detected",
+					"value": 0
+				},
+				{
+					"label": "Turn off immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
 					"value": 255
 				}
 			]
 		},
 		{
 			"#": "11",
-			"label": "ON_BEHAVIOUR",
-			"description": "On behaviour (timeout)",
+			"label": "Z-Wave On Command: Turn On Duration",
+			"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
 			"valueSize": 2,
-			"minValue": 2,
-			"maxValue": 209,
-			"defaultValue": 255
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 255,
+			"options": [
+				{
+					"label": "Turn on, wait for motion immediately",
+					"value": 0
+				},
+				{
+					"label": "Turn on immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
+					"value": 255
+				}
+			]
 		},
 		{
 			"#": "12",
-			"label": "ON_TIME_OVER",
-			"description": "On behaviour time over (timeout)",
+			"label": "Z-Wave On / Off-On: Motion Wait Time Limit",
+			"description": "How long to wait for motion after the configured duration before returning to normal operation to prevent staying on forever: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
 			"valueSize": 2,
 			"minValue": 0,
-			"maxValue": 209,
-			"defaultValue": 204
+			"maxValue": 255,
+			"defaultValue": 204,
+			"options": [
+				{
+					"label": "Do not wait for motion",
+					"value": 0
+				},
+				{
+					"label": "Wait for motion indefinitely",
+					"value": 255
+				}
+			]
 		},
 		{
 			"#": "13",
-			"label": "ON_OFF_ BEHAVIOUR",
-			"description": "Sequence On-Off behaviour (timeout)",
+			"label": "Z-Wave On-Off Sequence: Turn Off Duration",
+			"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
 			"valueSize": 2,
 			"minValue": 0,
-			"maxValue": 209,
-			"defaultValue": 204
+			"maxValue": 255,
+			"defaultValue": 204,
+			"options": [
+				{
+					"label": "Immediately, until motion detected",
+					"value": 0
+				},
+				{
+					"label": "Ignore sequence, treat like off command",
+					"value": 255
+				}
+			]
 		},
 		{
 			"#": "14",
-			"label": "OFF_ON_ BEHAVIOUR",
-			"description": "Sequence Off-On behaviour (timeout)",
+			"label": "Z-Wave Off-On Sequence: Turn On Duration",
+			"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
 			"valueSize": 2,
 			"minValue": 0,
-			"maxValue": 209,
-			"defaultValue": 204
+			"maxValue": 255,
+			"defaultValue": 204,
+			"options": [
+				{
+					"label": "Turn on, wait for motion immediately",
+					"value": 0
+				},
+				{
+					"label": "Ignore sequence, treat like on command",
+					"value": 255
+				}
+			]
 		},
 		{
 			"#": "15",
-			"label": "SEQUENCE_ TIME",
-			"description": "Sequence timing",
+			"label": "Sequence Timing",
+			"description": "Maximum delay between on-off or off-on commands to treat as a sequence",
 			"valueSize": 1,
+			"unit": "0.1 s",
 			"minValue": 10,
 			"maxValue": 50,
 			"defaultValue": 10
 		},
 		{
 			"#": "16",
-			"label": "MOTION_ DISABLE",
-			"description": "Motion Off behaviour (timeout)",
+			"label": "Motion Sensor Disable Timeout",
+			"description": "How long to disable internal motion sensor after Basic Set command to motion endpoint: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
 			"valueSize": 2,
-			"minValue": 2,
-			"maxValue": 209,
-			"defaultValue": 0
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Ignore command, sensor permanently enabled",
+					"value": 0
+				},
+				{
+					"label": "Ignore command, sensor permanently disabled",
+					"value": 255
+				}
+			]
 		}
 	]
 }

package/config/devices/0x027a/{zen16_1.3.json → zen16.json}

@@ -10,7 +10,7 @@
 		}
 	],
 	"firmwareVersion": {
-		"min": "1.3",
+		"min": "0.0",
 		"max": "255.255"
 	},
 	"associations": {
@@ -67,6 +67,33 @@
 		},
 		{
 			"#": "2",
+			"$if": "firmwareVersion <= 1.1",
+			"label": "Switch Type for Relay 1 (Sw1)",
+			"description": "Choose the wall switch type you want to connect to the Sw1 terminal.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Momentary Switch",
+					"value": 0
+				},
+				{
+					"label": "Toggle switch (follow switch)",
+					"value": 1
+				},
+				{
+					"label": "Toggle switch (change state on toggle)",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "2",
+			"$if": "firmwareVersion >= 1.2",
 			"label": "Switch Type for Relay 1 (Sw1)",
 			"description": "Choose the wall switch type you want to connect to the Sw1 terminal.",
 			"valueSize": 1,
@@ -96,6 +123,33 @@
 		},
 		{
 			"#": "3",
+			"$if": "firmwareVersion <= 1.1",
+			"label": "Switch Type for Relay 2 (Sw2)",
+			"description": "Choose the wall switch type you want to connect to the Sw2 terminal.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Momentary Switch",
+					"value": 0
+				},
+				{
+					"label": "Toggle switch (follow switch)",
+					"value": 1
+				},
+				{
+					"label": "Toggle switch (change state on toggle)",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "3",
+			"$if": "firmwareVersion >= 1.2",
 			"label": "Switch Type for Relay 2 (Sw2)",
 			"description": "Choose the wall switch type you want to connect to the Sw2 terminal.",
 			"valueSize": 1,
@@ -145,10 +199,6 @@
 				{
 					"label": "Toggle switch (change state on toggle)",
 					"value": 2
-				},
-				{
-					"label": "Garage door (momentary mode for Z-Wave control)",
-					"value": 3
 				}
 			]
 		},
@@ -184,7 +234,7 @@
 		{
 			"#": "6",
 			"label": "Auto Turn-Off Timer for Relay 1",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 15.",
+			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 65535,
@@ -204,7 +254,7 @@
 		{
 			"#": "8",
 			"label": "Auto Turn-Off Timer for Relay 2",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 17.",
+			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 65535,
@@ -214,7 +264,7 @@
 		{
 			"#": "9",
 			"label": "Auto Turn-On Timer for Relay 2",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 18.",
+			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 65535,
@@ -224,7 +274,7 @@
 		{
 			"#": "10",
 			"label": "Auto Turn-Off Timer for Relay 3",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 19.",
+			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 65535,
@@ -234,7 +284,7 @@
 		{
 			"#": "11",
 			"label": "Auto Turn-On Timer for Relay 3",
-			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on, using the unit defined in parameter 20.",
+			"description": "Sets the time after which you want relay 1 to automatically turn off once it has been turned on.",
 			"valueSize": 4,
 			"minValue": 0,
 			"maxValue": 65535,
@@ -259,10 +309,6 @@
 				{
 					"label": "Enabled",
 					"value": 1
-				},
-				{
-					"label": "Local control disabled with enable on/off reports",
-					"value": 2
 				}
 			]
 		},
@@ -284,10 +330,6 @@
 				{
 					"label": "Enabled",
 					"value": 1
-				},
-				{
-					"label": "Local control disabled with enable on/off reports",
-					"value": 2
 				}
 			]
 		},
@@ -309,15 +351,12 @@
 				{
 					"label": "Enabled",
 					"value": 1
-				},
-				{
-					"label": "Local control disabled with enable on/off reports",
-					"value": 2
 				}
 			]
 		},
 		{
 			"#": "15",
+			"$if": "firmwareVersion >= 1.1",
 			"label": "Auto Turn-Off Timer Unit for Relay 1",
 			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-Off time for Relay 1.",
 			"valueSize": 1,
@@ -343,6 +382,7 @@
 		},
 		{
 			"#": "16",
+			"$if": "firmwareVersion >= 1.1",
 			"label": "Auto Turn-On Timer Unit for Relay 1",
 			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-On time for Relay 1.",
 			"valueSize": 1,
@@ -368,6 +408,7 @@
 		},
 		{
 			"#": "17",
+			"$if": "firmwareVersion >= 1.1",
 			"label": "Auto Turn-Off Timer Unit for Relay 2",
 			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-Off time for Relay 2.  Default: minutes",
 			"valueSize": 1,
@@ -393,6 +434,7 @@
 		},
 		{
 			"#": "18",
+			"$if": "firmwareVersion >= 1.1",
 			"label": "Auto Turn-On Timer Unit for Relay 2",
 			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-On time for Relay 2.",
 			"valueSize": 1,
@@ -418,6 +460,7 @@
 		},
 		{
 			"#": "19",
+			"$if": "firmwareVersion >= 1.1",
 			"label": "Auto Turn-Off Timer Unit for Relay 3",
 			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-Off time for Relay 3.",
 			"valueSize": 1,
@@ -443,6 +486,7 @@
 		},
 		{
 			"#": "20",
+			"$if": "firmwareVersion >= 1.1",
 			"label": "Auto Turn-On Timer Unit for Relay 3",
 			"description": "Choose between second, minutes, and hours as the unit for Auto Turn-On time for Relay 3.",
 			"valueSize": 1,
@@ -468,6 +512,7 @@
 		},
 		{
 			"#": "21",
+			"$if": "firmwareVersion >= 1.3",
 			"label": "Normally open/close state for Relay 1",
 			"description": "Decide whether you'd like Relay 1 to be normally open (NO) or normally closed (NC).",
 			"valueSize": 1,
@@ -493,6 +538,7 @@
 		},
 		{
 			"#": "22",
+			"$if": "firmwareVersion >= 1.3",
 			"label": "Normally open/close state for Relay 2",
 			"description": "Decide whether you'd like Relay 2 to be normally open (NO) or normally closed (NC).",
 			"valueSize": 1,
@@ -518,6 +564,7 @@
 		},
 		{
 			"#": "23",
+			"$if": "firmwareVersion >= 1.3",
 			"label": "Normally open/close state for Relay 3",
 			"description": "Decide whether you'd like Relay 3 to be normally open (NO) or normally closed (NC).",
 			"valueSize": 1,
@@ -543,6 +590,7 @@
 		},
 		{
 			"#": "24",
+			"$if": "firmwareVersion >= 1.3",
 			"label": "DC Motor Mode",
 			"description": "When enabled only one relay may be on at a time, the other relay is automatically turned off.",
 			"valueSize": 1,