@zwave-js/config 8.7.3-0-pr-3653-ef412a0 → 8.7.5

package/config/devices/0x000c/hs-wx300.json

@@ -0,0 +1,189 @@
+{
+	"manufacturer": "HomeSeer Technologies",
+	"manufacturerId": "0x000c",
+	"label": "HS-WX300",
+	"description": "Wall Dimmer & Switch",
+	"devices": [
+		{
+			"productType": "0x4447",
+			"productId": "0x4037"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Companion Sync",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "3",
+			"label": "Bottom LED Operation",
+			"$import": "~/templates/master_template.json#led_indicator_two_options"
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#orientation"
+		},
+		{
+			"#": "5",
+			"label": "Dimming Threshold",
+			"description": "Sets the lowest dimming threshold",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 14,
+			"defaultValue": 1
+		},
+		{
+			"#": "6",
+			"label": "Central Scene, Multi-Tap, Press and Hold",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Enable (control load with delay)",
+					"value": 0
+				},
+				{
+					"label": "Disable (control load instantly)",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "11",
+			"label": "Ramp Rate (Z-Wave)",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 90,
+			"defaultValue": 3
+		},
+		{
+			"#": "12",
+			"label": "Ramp Rate (Manual)",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 90,
+			"defaultValue": 3
+		},
+		{
+			"#": "13",
+			"label": "Status Mode",
+			"$import": "templates/homeseer_template.json#status_mode"
+		},
+		{
+			"#": "14",
+			"label": "Load Status LED Color",
+			"description": "Set the LED color when displaying load status",
+			"$import": "templates/homeseer_template.json#led_colors"
+		},
+		{
+			"#": "21",
+			"label": "Status LED 1 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "22",
+			"label": "Status LED 2 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "23",
+			"label": "Status LED 3 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "24",
+			"label": "Status LED 4 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "25",
+			"label": "Status LED 5 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "26",
+			"label": "Status LED 6 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "27",
+			"label": "Status LED 7 Color",
+			"$import": "templates/homeseer_template.json#status_mode_choices"
+		},
+		{
+			"#": "30",
+			"label": "Custom Status Blink Frequency",
+			"$import": "templates/homeseer_template.json#blink_frequency"
+		},
+		{
+			"#": "31[0x01]",
+			"label": "LED 1 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "31[0x02]",
+			"label": "LED 2 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "31[0x04]",
+			"label": "LED 3 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "31[0x08]",
+			"label": "LED 4 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "31[0x10]",
+			"label": "LED 5 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "31[0x20]",
+			"label": "LED 6 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "31[0x40]",
+			"label": "LED 7 Blink Status",
+			"$import": "templates/homeseer_template.json#led_blink_status"
+		},
+		{
+			"#": "32",
+			"label": "Wire Mode",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "3 wire mode (Neutral, Line & Load)",
+					"value": 0
+				},
+				{
+					"label": "2 wire mode (Line & Load)",
+					"value": 1
+				}
+			]
+		}
+	]
+}

package/config/devices/0x000c/templates/homeseer_template.json

@@ -233,5 +233,23 @@
 		"label": "Temperature reportng interval when on line power",
 		"unit": "seconds",
 		"minValue": 30
+	},
+	"led_blink_status": {
+		"label": "LED Blink Status",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 1,
+		"defaultValue": 0,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Solid",
+				"value": 0
+			},
+			{
+				"label": "Blink",
+				"value": 1
+			}
+		]
 	}
 }

package/config/devices/0x0148/spirit.json

@@ -40,7 +40,7 @@
 		{
 			"#": "2",
 			"label": "LCD Timeout",
-			"unit": "s",
+			"unit": "seconds",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 30,
@@ -92,8 +92,8 @@
 		},
 		{
 			"#": "5",
-			"label": "Measured Temperature report",
-			"unit": "°C",
+			"label": "Temperature Report Threshold",
+			"unit": "0.1 °C",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 50,
@@ -138,7 +138,7 @@
 		{
 			"#": "8",
 			"label": "Temperature Offset",
-			"unit": "1/10 °C",
+			"unit": "0.1 °C",
 			"valueSize": 1,
 			"minValue": -128,
 			"maxValue": 50,

package/config/devices/0x0258/nas-pd07u1.json

@@ -0,0 +1,209 @@
+{
+	"manufacturer": "Shenzhen Neo Electronics Co., Ltd.",
+	"manufacturerId": "0x0258",
+	"label": "NAS-PD07ZU1",
+	"description": "5 in 1 PIR Motion Sensor",
+	"devices": [
+		{
+			"productType": "0x0020",
+			"productId": "0x0718"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "templates/shenzhen_neo_template.json#blink_on_motion"
+		},
+		{
+			"#": "2",
+			"label": "Motion Detection",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "3",
+			"$import": "templates/shenzhen_neo_template.json#motion_prevent_retrigger"
+		},
+		{
+			"#": "4",
+			"label": "Require Luminance Change for Basic Sets on Motion",
+			"description": "If enabled, a Basic Set will be set if the ambient light is below the level defined in Parameter 16",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Binary Sensor Report on Motion",
+			"description": "If enabled, a Binary Sensor report will be sent on Motion",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "6",
+			"label": "Motion Sensor Sensitivity",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 15,
+			"defaultValue": 2,
+			"unsigned": true
+		},
+		{
+			"#": "7",
+			"label": "Temperature Offset Value",
+			"valueSize": 1,
+			"unit": "0.1 °C/F",
+			"minValue": -120,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": false
+		},
+		{
+			"#": "8",
+			"label": "Humidity Offset Value",
+			"valueSize": 1,
+			"unit": "0.1 %",
+			"minValue": -120,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": false
+		},
+		{
+			"#": "9",
+			"label": "Temperature Change Report Threshold",
+			"valueSize": 1,
+			"unit": "0.1 °C/F",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 10
+		},
+		{
+			"#": "10",
+			"label": "Humidity Change Report Threshold",
+			"valueSize": 1,
+			"unit": "0.1 %",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 20
+		},
+		{
+			"#": "11",
+			"label": "Luminance Change Report Threshold",
+			"valueSize": 1,
+			"unit": "lux",
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 50
+		},
+		{
+			"#": "12",
+			"label": "Association Group 2: Basic Set Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 100,
+			"options": [
+				{
+					"label": "On (255)",
+					"value": 100
+				}
+			]
+		},
+		{
+			"#": "13",
+			"label": "Motion Blind Time",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 1,
+			"maxValue": 8,
+			"defaultValue": 8
+		},
+		{
+			"#": "14",
+			"label": "Basic Set Off Delay Time",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 30000,
+			"defaultValue": 30
+		},
+		{
+			"#": "15",
+			"label": "Motion Clear Time",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 1,
+			"maxValue": 30000,
+			"defaultValue": 30
+		},
+		{
+			"#": "16",
+			"label": "Luminance Threshold for Basic Sets",
+			"unit": "lux",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 1000,
+			"defaultValue": 50
+		},
+		{
+			"#": "17",
+			"label": "Sensor Report Interval",
+			"unit": "seconds",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 30000,
+			"defaultValue": 180
+		},
+		{
+			"#": "99",
+			"label": "Light Intensity Offset Value",
+			"description": "See manual for details",
+			"valueSize": 2,
+			"minValue": 1,
+			"maxValue": 32767,
+			"defaultValue": 5320
+		}
+	]
+}

package/config/devices/0x027a/zen06.json

@@ -144,5 +144,11 @@
 			"maxValue": 2678400,
 			"defaultValue": 0
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "There are three types of inclusion for this device: 1) Auto Z-Wave Inclusion 2) Manual Z-Wave Inclusion 3) Secure Z-Wave Inclusion.\n\n1) Auto Z-Wave Inclusion\n1. Put your Z-Wave controller in inclusion mode\n2. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n3. LED indicator will flash blue4. A new on / off device should be recognized by your Z-Wave controller\n\n2)Manual Z-Wave Inclusion\n1. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n2. Put your Z-Wave controller in inclusion mode\n3. Press and release the Z-Wave button 3 TIMES QUICKLY\n4. LED indicator will flash blue\n5. A new on / off device should be recognized by your Z-Wave controller\n\n3)Secure Z-Wave Inclusion\n1. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n2. Put your Z-Wave controller in secure inclusion mode\n3. Press and HOLD the Z-Wave button for at least 3 seconds\n4. LED indicator will flash green\n5. LED indicator will turn solid green once the inclusion is completed. Please allow 5 minutes for configuration. DO NOT press any buttons or move the device during that time\n6. A new secure on / off device should be recognized by your Z-Wave controller.",
+		"exclusion": "1. Plug the smart plug into a grounded receptacle located within 3 feet from your Z-Wave gateway controller\n2. Put your Z-Wave controller in exclusion mode\n3. Press and release the Z-Wave button 3 TIMES QUICKLY\n4. LED indicator will flash orange\n5. The smart plug should disappear from your controller's device list and LED indicator will remain solid orange for a few seconds to indicate exclusion.",
+		"reset": "Plug the smart plug into a grounded receptacle, then PRESS AND HOLD the Z-Wave button for AT LEAST 20 SECONDS. The LED indicator will stay solid yellow for 2 seconds to indicate successful reset. The plug will then automatically turn off. NOTE: All previously recorded activity and custom settings will be erased from the devices memory. You may only reset your smart plug once it has been included to a Z-Wave network.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=Manuals/1901/Zooz-Z-Wave-Smart-Plug-ZEN06%20Manual.pdf"
+	}
 }

package/config/devices/0x0346/range_extender_gen2.json

@@ -0,0 +1,85 @@
+{
+	"manufacturer": "Ring",
+	"manufacturerId": "0x0346",
+	"label": "4AR1SZ-0EN0",
+	"description": "Range Extender (2nd generation)",
+	"devices": [
+		{
+			"productType": "0x0401",
+			"productId": "0x0301"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Heartbeat Interval",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 70,
+			"defaultValue": 70,
+			"unsigned": true
+		},
+		{
+			"#": "2",
+			"label": "Message Retry Attempt Limit",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 5,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "Delay Between Retry Attempts",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 1,
+			"maxValue": 60,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "4",
+			"label": "LED Indicator",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Always off",
+					"value": 0
+				},
+				{
+					"label": "On when activated",
+					"value": 1
+				},
+				{
+					"label": "On when activated or cleared",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Supervision Report Timeout",
+			"description": "How long to wait for a Supervision Report response to a Supervision Get",
+			"valueSize": 2,
+			"unit": "ms",
+			"minValue": 500,
+			"maxValue": 5000,
+			"defaultValue": 1500,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"manual": "https://support.ring.com/hc/en-us/article_attachments/360055786012/Ring_Alarm_Range_Extender_Zwave.pdf"
+	}
+}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "8.7.3-0-pr-3653-ef412a0",
+  "version": "8.7.5",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -40,8 +40,8 @@
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "8.7.3-0-pr-3653-ef412a0",
-    "@zwave-js/shared": "8.7.3-0-pr-3653-ef412a0",
+    "@zwave-js/core": "8.7.4",
+    "@zwave-js/shared": "8.7.3",
     "alcalzone-shared": "^4.0.0",
     "ansi-colors": "^4.1.1",
     "fs-extra": "^10.0.0",
@@ -60,7 +60,7 @@
     "@types/semver": "^7.3.9",
     "@types/xml2json": "^0.11.4",
     "@types/yargs": "^17.0.5",
-    "@zwave-js/maintenance": "8.7.3-0-pr-3653-ef412a0",
+    "@zwave-js/maintenance": "8.7.4",
     "axios": "^0.24.0",
     "comment-json": "^4.1.1",
     "esbuild": "*",
@@ -73,5 +73,5 @@
     "xml2json": "^0.12.0",
     "yargs": "^17.2.1"
   },
-  "gitHead": "ac5b501a00e7dd320880659c004ed6b150637ccd"
+  "gitHead": "dc0986bff07c3b784d9492f35f1440ad852cd0d3"
 }