@zwave-js/config 8.11.6 → 9.0.0-beta.0

package/config/devices/0x010f/fgr223.json

@@ -313,7 +313,7 @@
 			"#": "155",
 			"label": "Motor operation detection",
 			"description": "Power threshold to be interpreted as reaching a limit switch",
-			"unit": "1/10 sec",
+			"unit": "W",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,

package/config/devices/0x013c/psr03-a.json

@@ -0,0 +1,73 @@
+{
+	"manufacturer": "Philio Technology Corp",
+	"manufacturerId": "0x013c",
+	"label": "PSR03-A",
+	"description": "Keyfob",
+	"devices": [
+		{
+			"productType": "0x0008",
+			"productId": "0x0026",
+			"zwaveAllianceId": 1397
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 4,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Lighting Group 1 (Left)",
+			"maxNodes": 4
+		},
+		"3": {
+			"label": "Lighting Group 2 (Right)",
+			"maxNodes": 4
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "2",
+			"$import": "templates/philio_template.json#basic_set_value"
+		},
+		{
+			"#": "7[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Button Function",
+			"options": [
+				{
+					"label": "AV control",
+					"value": 0
+				},
+				{
+					"label": "Lighting group control",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "10",
+			"$import": "templates/philio_template.json#battery_report_interval"
+		},
+		{
+			"#": "82",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Left Key: Basic Set Value"
+		},
+		{
+			"#": "83",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Right Key: Basic Set Value"
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Have Z-Wave™ Controller entered add mode.\n2. Press the key three times within 1.5 seconds to enter the add mode.\n3. After add successful, the device will wake to receive the setting command from Z-Wave ™ Controller about 20 seconds",
+		"exclusion": "1. Have Z-Wave ™ Controller entered remove mode.\n2. Press the key three times within 1.5 seconds to enter the \nremove mode.\nNode ID has been excluded",
+		"reset": "Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.\n1. Press the key three times,and do not release the key in the 4 th pressed, and the LED will light ON.\n2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the keys. If successful, the LED will light ON one second. Otherwise, the LED will flash once.\n3. IDs are remove and all settings will reset to factory \ndefault",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1407/PSR03_ABC_version_Manual.pdf"
+	}
+}

package/config/devices/0x013c/psr03-b.json

@@ -0,0 +1,127 @@
+{
+	"manufacturer": "Philio Technology Corp",
+	"manufacturerId": "0x013c",
+	"label": "PSR03-B",
+	"description": "Scene Remote",
+	"devices": [
+		{
+			"productType": "0x0008",
+			"productId": "0x001d",
+			"zwaveAllianceId": 1176
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 4,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Lighting Group 1 (Top Left)",
+			"maxNodes": 4
+		},
+		"3": {
+			"label": "Lighting Group 2 (Top Right)",
+			"maxNodes": 4
+		},
+		"4": {
+			"label": "Lighting Group 3 (Bottom Left)",
+			"maxNodes": 4
+		},
+		"5": {
+			"label": "Lighting Group 4 (Bottom Right)",
+			"maxNodes": 4
+		},
+		"6": {
+			"label": "Lighting Group 5 (Top Left)",
+			"maxNodes": 4
+		},
+		"7": {
+			"label": "Lighting Group 6 (Top Right)",
+			"maxNodes": 4
+		},
+		"8": {
+			"label": "Lighting Group 7 (Bottom Left)",
+			"maxNodes": 4
+		},
+		"9": {
+			"label": "Lighting Group 8 (Bottom Right)",
+			"maxNodes": 4
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "2",
+			"$import": "templates/philio_template.json#basic_set_value"
+		},
+		{
+			"#": "7[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Button Function",
+			"options": [
+				{
+					"label": "AV control",
+					"value": 0
+				},
+				{
+					"label": "Lighting group control",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "10",
+			"$import": "templates/philio_template.json#battery_report_interval"
+		},
+		{
+			"#": "82",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 1: Basic Set Value"
+		},
+		{
+			"#": "83",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 2: Basic Set Value"
+		},
+		{
+			"#": "84",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 3: Basic Set Value"
+		},
+		{
+			"#": "85",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 4: Basic Set Value"
+		},
+		{
+			"#": "86",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 5: Basic Set Value"
+		},
+		{
+			"#": "87",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 6: Basic Set Value"
+		},
+		{
+			"#": "88",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 7: Basic Set Value"
+		},
+		{
+			"#": "89",
+			"$import": "templates/philio_template.json#association_basic_set_value",
+			"label": "Lighting Group 8: Basic Set Value"
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Have Z-Wave™ Controller entered add mode.\n2. Press the key three times within 1.5 seconds to enter the add mode.\n3. After add successful, the device will wake to receive the setting command from Z-Wave ™ Controller about 20 seconds",
+		"exclusion": "1. Have Z-Wave ™ Controller entered remove mode.\n2. Press the key three times within 1.5 seconds to enter the \nremove mode.\nNode ID has been excluded",
+		"reset": "Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.\n1. Press the key three times,and do not release the key in the 4 th pressed, and the LED will light ON.\n2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the keys. If successful, the LED will light ON one second. Otherwise, the LED will flash once.\n3. IDs are remove and all settings will reset to factory \ndefault",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1407/PSR03_ABC_version_Manual.pdf"
+	}
+}

package/config/devices/0x013c/psr03-c.json

@@ -0,0 +1,36 @@
+{
+	"manufacturer": "Philio Technology Corp",
+	"manufacturerId": "0x013c",
+	"label": "PSR03-C",
+	"description": "Panic Button",
+	"devices": [
+		{
+			"productType": "0x0008",
+			"productId": "0x0027",
+			"zwaveAllianceId": 1407
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 4,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "10",
+			"$import": "templates/philio_template.json#battery_report_interval"
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Have Z-Wave™ Controller entered add mode.\n2. Press the key three times within 1.5 seconds to enter the add mode.\n3. After add successful, the device will wake to receive the setting command from Z-Wave ™ Controller about 20 seconds",
+		"exclusion": "1. Have Z-Wave ™ Controller entered remove mode.\n2. Press the key three times within 1.5 seconds to enter the \nremove mode.\nNode ID has been excluded",
+		"reset": "Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.\n1. Press the key three times,and do not release the key in the 4 th pressed, and the LED will light ON.\n2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the keys. If successful, the LED will light ON one second. Otherwise, the LED will flash once.\n3. IDs are remove and all settings will reset to factory \ndefault",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1407/PSR03_ABC_version_Manual.pdf"
+	}
+}

package/config/devices/0x013c/templates/philio_template.json

@@ -0,0 +1,54 @@
+{
+	"basic_set_value": {
+		"label": "Basic Set Value",
+		"description": "Allowable range: 0-99, 255",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 255,
+		"unsigned": true,
+		"options": [
+			{
+				"label": "Off",
+				"value": 0
+			},
+			{
+				"label": "Last Brightness",
+				"value": 255
+			}
+		]
+	},
+	"association_basic_set_value": {
+		"description": "Allowable range: 0-99, 255",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 255,
+		"unsigned": true,
+		"options": [
+			{
+				"label": "Value of parameter 2 (Basic Set Value)",
+				"value": 0
+			},
+			{
+				"label": "Last brightness",
+				"value": 255
+			}
+		]
+	},
+	"battery_report_interval": {
+		"label": "Battery Report Interval",
+		"valueSize": 1,
+		"unit": "minutes",
+		"minValue": 0,
+		"maxValue": 12,
+		"defaultValue": 12,
+		"unsigned": true,
+		"options": [
+			{
+				"label": "Disable",
+				"value": 0
+			}
+		]
+	}
+}

package/config/devices/0x016a/ft111.json

@@ -62,12 +62,12 @@
 		},
 		{
 			"#": "81",
-			"$import": "~/0x0086/templates/aeotec_template.json#notification_report_type",
+			"$import": "~/0x0086/templates/aeotec_template.json#enable_notification_basic_set_only",
 			"label": "Send Notifications to Associated Devices (Group 3)"
 		},
 		{
 			"#": "82",
-			"$import": "~/0x0086/templates/aeotec_template.json#notification_report_type",
+			"$import": "~/0x0086/templates/aeotec_template.json#enable_notification_basic_set_only",
 			"label": "Send Notifications to Associated Devices (Group 4)"
 		},
 		{

package/config/devices/0x027a/templates/zooz_template.json

@@ -251,5 +251,24 @@
 				"value": 0
 			}
 		]
+	},
+	"paddle_programming": {
+		"label": "Paddle Programming",
+		"description": "Disables inclusion/exclusion commands on paddle for use with scene controls.",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 1,
+		"defaultValue": 0,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Enable",
+				"value": 0
+			},
+			{
+				"label": "Disable",
+				"value": 1
+			}
+		]
 	}
 }

package/config/devices/0x027a/zen72.json

@@ -147,6 +147,11 @@
 		{
 			"#": "22",
 			"$import": "templates/zooz_template.json#night_light_mode"
+		},
+		{
+			"#": "26",
+			"$if": "firmwareVersion >= 10.0",
+			"$import": "templates/zooz_template.json#paddle_programming"
 		}
 	],
 	"metadata": {

package/config/devices/0x027a/zen74.json

@@ -93,6 +93,11 @@
 		{
 			"#": "22",
 			"$import": "templates/zooz_template.json#night_light_mode"
+		},
+		{
+			"#": "26",
+			"$if": "firmwareVersion >= 10.0",
+			"$import": "templates/zooz_template.json#paddle_programming"
 		}
 	],
 	"metadata": {

package/config/devices/0x027a/zen77.json

@@ -129,6 +129,11 @@
 		{
 			"#": "22",
 			"$import": "templates/zooz_template.json#night_light_mode"
+		},
+		{
+			"#": "26",
+			"$if": "firmwareVersion >= 10.0",
+			"$import": "templates/zooz_template.json#paddle_programming"
 		}
 	],
 	"metadata": {

package/config/devices/0x0371/zw141.json

@@ -250,22 +250,8 @@
 		},
 		{
 			"#": "80",
-			"$import": "~/0x0086/templates/aeotec_template.json#notification_report_type",
-			"label": "Command Report Type",
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Basic CC Report",
-					"value": 1
-				},
-				{
-					"label": "MultiLevel Switch CC Report",
-					"value": 2
-				}
-			]
+			"$import": "~/0x0086/templates/aeotec_template.json#multilevel_report_type",
+			"label": "Command Report Type"
 		},
 		{
 			"#": "85",

package/config/devices/0x0371/zwa037.json

@@ -72,7 +72,7 @@
 		},
 		{
 			"#": "82",
-			"$import": "~/0x0086/templates/aeotec_template.json#wallmote_command_type"
+			"$import": "~/0x0086/templates/aeotec_template.json#wallswitch_command_type"
 		},
 		{
 			"#": "83",

package/config/devices/0x0371/zwa038.json

@@ -56,7 +56,7 @@
 		},
 		{
 			"#": "82",
-			"$import": "~/0x0086/templates/aeotec_template.json#wallmote_command_type"
+			"$import": "~/0x0086/templates/aeotec_template.json#wallswitch_command_type"
 		},
 		{
 			"#": "83",

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "8.11.6",
+  "version": "9.0.0-beta.0",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -40,19 +40,19 @@
     "ts": "node -r esbuild-register"
   },
   "dependencies": {
-    "@zwave-js/core": "8.11.6",
-    "@zwave-js/shared": "8.11.3",
+    "@zwave-js/core": "9.0.0-beta.0",
+    "@zwave-js/shared": "9.0.0-beta.0",
     "alcalzone-shared": "^4.0.1",
     "ansi-colors": "^4.1.1",
-    "fs-extra": "^10.0.0",
+    "fs-extra": "^10.0.1",
     "json-logic-js": "^2.0.2",
     "json5": "^2.2.0",
     "semver": "^7.3.5",
-    "winston": "^3.5.1"
+    "winston": "^3.6.0"
   },
   "devDependencies": {
     "@types/fs-extra": "^9.0.13",
-    "@types/jest": "^26.0.24",
+    "@types/jest": "^27.4.1",
     "@types/js-levenshtein": "^1.1.1",
     "@types/json-logic-js": "^1.2.1",
     "@types/node": "^15.12.5",
@@ -60,18 +60,17 @@
     "@types/semver": "^7.3.9",
     "@types/xml2json": "^0.11.4",
     "@types/yargs": "^17.0.8",
-    "@zwave-js/maintenance": "8.11.6",
-    "axios": "^0.25.0",
+    "@zwave-js/maintenance": "9.0.0-beta.0",
+    "axios": "^0.26.0",
     "comment-json": "^4.2.2",
-    "esbuild": "*",
+    "esbuild": "0.14.1",
     "esbuild-register": "^3.3.2",
     "jest-extended": "^0.11.5",
     "js-levenshtein": "^1.1.6",
     "pegjs": "^0.10.0",
     "ts-pegjs": "^0.3.1",
-    "typescript": "4.5.5",
+    "typescript": "4.6.2",
     "xml2json": "^0.12.0",
     "yargs": "^17.3.1"
-  },
-  "gitHead": "b6028b1f7d6e5dac9508db6abe57d3acdce33e19"
-}
+  }
+}

package/LICENSE

@@ -1,21 +0,0 @@
-MIT License
-
-Copyright (c) 2018-2021 AlCalzone
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.

package/config/devices/0x013c/ph-psr03.json

@@ -1,44 +0,0 @@
-{
-	"manufacturer": "Philio Technology Corp",
-	"manufacturerId": "0x013c",
-	"label": "PH-PSR03",
-	"description": "Z-WAVE Remote",
-	"devices": [
-		{
-			"productType": "0x0008",
-			"productId": "0x001d"
-		}
-	],
-	"firmwareVersion": {
-		"min": "0.0",
-		"max": "255.255"
-	},
-	"paramInformation": [
-		{
-			"#": "2",
-			"label": "Basic Set Level",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 255,
-			"unsigned": true
-		},
-		{
-			"#": "7",
-			"label": "Customer Function",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 0,
-			"unsigned": true
-		},
-		{
-			"#": "10",
-			"label": "Auto Report Battery Time",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 127,
-			"defaultValue": 12
-		}
-	]
-}