@zwave-js/config 14.3.10 → 14.3.13

package/config/devices/0x015f/mh-ds221.json

@@ -7,6 +7,10 @@
 		{
 			"productType": "0xd221",
 			"productId": "0x7102"
+		},
+		{
+			"productType": "0xd221",
+			"productId": "0x5102"
 		}
 	],
 	"firmwareVersion": {

package/config/devices/0x026e/crzb.json

@@ -0,0 +1,26 @@
+{
+	"manufacturer": "Springs Window Fashions",
+	"manufacturerId": "0x026e",
+	"label": "CRZB",
+	"description": "Motorized Blinds",
+	"devices": [
+		{
+			"productType": "0x4254",
+			"productId": "0x5a42"
+		},
+		{
+			"productType": "0x5252",
+			"productId": "0x5a42"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"metadata": {
+		"inclusion": "1. Put Primary Controller into Inclusion Mode\n\n2. Press and Hold Shade Programming Button for 3 seconds (release when LED flashes).\n\n\n\nTo include a shade and shade remote to the Z-Wave network, and pair the remote to the shade you must follow this sequence:\n\n1. Do a shade Z-Wave reset and then include into the Z-Wave network.\n\n2. Do a remote reset and then include the remote into the Z-Wave network.\n\n3. Pair the remote to the shade.",
+		"exclusion": "1. Put Primary Controller into Exclusion Mode\n\n2. Press and Hold Shade Programming Button for 3 seconds (release when LED flashes).",
+		"reset": "Z-Wave Reset:Exclude from the controller before doing this. Press and hold the button on the shade for approximately 10 seconds (release when the shade jogs, holding longer will perform a full reset).\n\nFull Reset: Please use this procedure only when the network primary controller is missing or otherwise inoperable. Press and hold the button on the shade for approximately 15 seconds (the LED will stop flashing when complete) - you will need to set top / bottom / home positions.",
+		"manual": "https://support.springswf.net/helpdesk/attachments/30050113378"
+	}
+}

package/config/devices/0x027a/templates/zooz_template.json

@@ -1126,6 +1126,16 @@
 			}
 		]
 	},
+	"on_off_switch_mode": {
+		"$import": "~/templates/master_template.json#base_enable_disable",
+		"label": "On/Off Switch Mode",
+		"description": "Disables dimming, locks brightness at 100% and sets all ramp rates to instant on/off."
+	},
+	"zen5x_external_switch_multiple_click": {
+		"$import": "~/templates/master_template.json#base_enable_disable",
+		"label": "External Switch: Multiple Click Detection",
+		"defaultValue": 1
+	},
 	"zen5x_metadata": {
 		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP UP 3 TIMES QUICKLY if using traditional Z-Wave inclusion. \nSCAN THE QR CODE / ENTER THE 5-DIGIT PIN if using the new SmartStart method. The SmartStart security PIN is located on the back of the relay, next to the Z-Wave Plus logo.\n3. The LED indicator will blink green to signal communication and turn green for 2 seconds if inclusion is successful or turn red for 2 seconds if the pairing attempt fails",
 		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the relay if possible\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com) \n3. Click the Z-Wave button on the relay 3 times quickly (the LED indicator will start blinking green)\n4. Your hub will confirm exclusion, the LED indicator on the relay will turn green for 2 seconds, and the device will disappear from your controller's device list",

package/config/devices/0x027a/zen04.json

@@ -7,13 +7,7 @@
 {
 	"manufacturer": "Zooz",
 	"manufacturerId": "0x027a",
-	"label": [
-		{
-			"$if": "firmwareVersion >= 2.10",
-			"value": "ZEN04 800LR"
-		},
-		"ZEN04"
-	],
+	"label": "ZEN04",
 	"description": "Indoor Smart Plug",
 	"devices": [
 		{
@@ -76,16 +70,33 @@
 		},
 		{
 			"#": "5",
-			"label": "Power (W) Reporting Threshold",
+			"$if": "firmwareVersion < 2.30",
+			"label": "Power (W) Report Threshold",
 			"valueSize": 1,
 			"unit": "W",
 			"minValue": 5,
 			"maxValue": 50,
 			"defaultValue": 5
 		},
+		{
+			"#": "5",
+			"$if": "firmwareVersion >= 2.30",
+			"label": "Power (W) Report Threshold",
+			"valueSize": 1,
+			"unit": "W",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 5,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
 		{
 			"#": "6",
-			"label": "Power (W) Reporting Interval",
+			"label": "Power (W) Report Interval",
 			"valueSize": 4,
 			"unit": "minutes",
 			"minValue": 1,
@@ -101,32 +112,85 @@
 		},
 		{
 			"#": "7",
-			"label": "Current (A) Reporting Threshold",
+			"$if": "firmwareVersion < 2.30",
+			"label": "Current (A) Report Threshold",
 			"valueSize": 1,
 			"unit": "0.1 A",
 			"minValue": 1,
 			"maxValue": 10,
 			"defaultValue": 1
 		},
+		{
+			"#": "7",
+			"$if": "firmwareVersion >= 2.30",
+			"label": "Current (A) Report Threshold",
+			"valueSize": 1,
+			"unit": "0.1 A",
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 1,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
 		{
 			"#": "12",
 			"$if": "firmwareVersion >= 1.30",
-			"label": "Current (A) Reporting Interval",
+			"label": "Current (A) Report Interval",
 			"valueSize": 4,
 			"unit": "minutes",
 			"minValue": 1,
 			"maxValue": 65535,
 			"defaultValue": 60
 		},
+		{
+			"#": "15",
+			"$if": "firmwareVersion >= 2.30",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "Energy (kWh) Reports",
+			"description": "When disabled, no kWh reports are sent, regardless of the threshold and interval settings.",
+			"defaultValue": 0
+		},
 		{
 			"#": "8",
-			"label": "Energy (kWh) Reporting Threshold",
+			"$if": "firmwareVersion < 2.30",
+			"label": "Energy (kWh) Report Threshold",
 			"valueSize": 1,
 			"unit": "0.01 kWh",
 			"minValue": 1,
 			"maxValue": 100,
 			"defaultValue": 1
 		},
+		{
+			"#": "8",
+			"$if": "firmwareVersion >= 2.30",
+			"label": "Energy (kWh) Report Threshold",
+			"valueSize": 1,
+			"unit": "0.01 kWh",
+			"minValue": 0,
+			"maxValue": 200,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "14",
+			"$if": "firmwareVersion >= 2.30",
+			"label": "Energy (kWh) Report Interval",
+			"valueSize": 4,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 65535,
+			"defaultValue": 60
+		},
 		{
 			"#": "13",
 			"$if": "firmwareVersion >= 1.30",

package/config/devices/0x027a/zen15.json

@@ -15,16 +15,108 @@
 		"max": "255.255"
 	},
 	"paramInformation": [
+		{
+			"#": "27",
+			"$if": "firmwareVersion < 1.3",
+			"label": "LED Indicator",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Always on",
+					"value": 0
+				},
+				{
+					"label": "Momentary (At status change)",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "27",
+			"$if": "firmwareVersion >= 1.3",
+			"label": "LED Power Consumption Indicator",
+			"description": "Pink = Power Switch is off; Blue = 0–300 W; Cyan = 300–600 W; Green = 600–900 W; Yellow = 900–1200 W; Red = 1200–1500 W; Purple = 1500–1800 W; Purple blink = over 1800 W",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Always on",
+					"value": 0
+				},
+				{
+					"label": "On when switch is on, off when switch is off",
+					"value": 1
+				},
+				{
+					"label": "5 seconds following switch activation, then off",
+					"value": 2
+				},
+				{
+					"label": "Always off (Except for inclusion, exclusion, and Z-Wave range test)",
+					"value": 3
+				}
+			]
+		},
 		{
 			"#": "20",
+			"$if": "firmwareVersion < 2.10",
 			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Overload Protection",
+			"description": "Turn off when load exceeds 16.5 A",
 			"defaultValue": 1
 		},
+		{
+			"#": "20",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Overload Protection",
+			"description": "How long the load can exceed 16.5 A before turning off.",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 2,
+			"maxValue": 5,
+			"defaultValue": 2
+		},
+		{
+			"#": "36",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Overload Protection Turn On Delay",
+			"description": "How long to wait after the load was shut off by overload protection before turning it on again. Allowable range: 0, 10-65535.",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
 		{
 			"#": "21",
 			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
 		},
+		{
+			"#": "35",
+			"$if": "firmwareVersion >= 2.0",
+			"label": "Delay Turn-On After Power Failure",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 600,
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
 		{
 			"#": "24",
 			"label": "On/Off Status Change Notifications",
@@ -79,64 +171,46 @@
 			]
 		},
 		{
-			"#": "30",
-			"$if": "firmwareVersion >= 1.3",
-			"$import": "~/templates/master_template.json#base_enable_disable",
-			"label": "Manual Control",
-			"description": "Disables manual control from the device itself"
-		},
-		{
-			"#": "27",
-			"$if": "firmwareVersion < 1.3",
-			"label": "LED Indicator",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
+			"#": "151",
+			"label": "Power (W) Change Report Threshold",
+			"valueSize": 2,
+			"unit": "W",
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 50,
+			"unsigned": true,
 			"options": [
 				{
-					"label": "Always on",
+					"label": "Disable",
 					"value": 0
-				},
-				{
-					"label": "Momentary (At status change)",
-					"value": 1
 				}
 			]
 		},
 		{
-			"#": "27",
-			"$if": "firmwareVersion >= 1.3",
-			"label": "LED Power Consumption Indicator",
-			"description": "Pink = Power Switch is off; Blue = 0–300 W; Cyan = 300–600 W; Green = 600–900 W; Yellow = 900–1200 W; Red = 1200–1500 W; Purple = 1500–1800 W; Purple blink = over 1800 W",
+			"#": "152",
+			"label": "Power Report Percentage Threshold",
 			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 10,
+			"unsigned": true,
 			"options": [
 				{
-					"label": "Always on",
+					"label": "Disable",
 					"value": 0
-				},
-				{
-					"label": "On when switch is on, off when switch is off",
-					"value": 1
-				},
-				{
-					"label": "5 seconds following switch activation, then off",
-					"value": 2
-				},
-				{
-					"label": "Always off (Except for inclusion, exclusion, and Z-Wave range test)",
-					"value": 3
 				}
 			]
 		},
 		{
-			"#": "151",
-			"label": "Power Report Value Threshold",
-			"valueSize": 2,
+			"#": "175",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Voltage (V) Change Report Threshold",
+			"valueSize": 1,
+			"unit": "V",
 			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 50,
+			"maxValue": 255,
+			"defaultValue": 10,
 			"unsigned": true,
 			"options": [
 				{
@@ -146,13 +220,14 @@
 			]
 		},
 		{
-			"#": "152",
-			"label": "Power Report Percentage Threshold",
-			"valueSize": 1,
-			"unit": "%",
+			"#": "176",
+			"$if": "firmwareVersion >= 2.10",
+			"label": "Current (A) Change Report Threshold",
+			"valueSize": 2,
+			"unit": "mA",
 			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 10,
+			"maxValue": 65535,
+			"defaultValue": 1000,
 			"unsigned": true,
 			"options": [
 				{
@@ -163,7 +238,7 @@
 		},
 		{
 			"#": "171",
-			"label": "Power Report Frequency",
+			"label": "Power (W) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
 			"minValue": 0,
@@ -178,7 +253,7 @@
 		},
 		{
 			"#": "172",
-			"label": "Energy Report Frequency",
+			"label": "Energy (kWh) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
 			"minValue": 0,
@@ -193,7 +268,7 @@
 		},
 		{
 			"#": "173",
-			"label": "Voltage Report Frequency",
+			"label": "Voltage (V) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
 			"minValue": 0,
@@ -208,7 +283,7 @@
 		},
 		{
 			"#": "174",
-			"label": "Electricity Report Frequency",
+			"label": "Current (A) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
 			"minValue": 0,
@@ -220,6 +295,28 @@
 					"value": 0
 				}
 			]
+		},
+		{
+			"#": "30",
+			"$if": "firmwareVersion >= 1.3",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Manual Control",
+			"description": "Disables manual control from the device itself",
+			"defaultValue": 1
+		},
+		{
+			"#": "31",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Z-Wave ON Control",
+			"description": "Disables ON control from the hub",
+			"defaultValue": 1
+		},
+		{
+			"#": "32",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Z-Wave OFF Control",
+			"description": "Disables OFF control from the hub",
+			"defaultValue": 1
 		}
 	],
 	"metadata": {

package/config/devices/0x027a/zen17.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0x7000",
-			"productId": "0xa00a"
+			"productId": "0xa00a",
+			"zwaveAllianceId": 5127
 		},
 		{
 			"productType": "0xbb00",
@@ -519,6 +520,12 @@
 					"value": 3
 				}
 			]
+		},
+		{
+			"#": "28",
+			"$if": "firmwareVersion >= 2.0",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Simultaneous On/Off Operation of R1/R2"
 		}
 	],
 	"compat": {
@@ -532,6 +539,12 @@
 		"inclusion": "INCLUSION\n1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP THE Z-WAVE BUTTON 3 TIMES QUICKLY if using traditional Z-Wave inclusion.\n3. The LED indicator will blink to signal communication and remain on for 2 seconds to confirm inclusion.",
 		"exclusion": "1. Bring your Universal Relay close to the Z-Wave hub and power it\n2. Put the Z-Wave hub into exclusion mode\n3. Click the Z-Wave button 3 times quickly\n4. Your hub will confirm exclusion and the Universal Relay will disappear from your controller's device list",
 		"reset": "If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To complete the reset process manually, click the Z-Wave button 4 times quickly, the LED indicator will light up,\nthen quickly click the Z-Wave button 4 times again. The LED indicator will flash 3 times to confirm successful reset and will then turn off",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4132/zooz-700-series-z-wave-plus-universal-relay-zen17-ver1.0-manual.pdf"
+		"manual": [
+			{
+				"$if": "firmwareVersion >= 2.0",
+				"value": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=cert_portal/certs/1177/zooz-800-series-z-wave-long-range-universal-relay-zen17-800lr-full-manual_1.pdf"
+			},
+			"https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4132/zooz-700-series-z-wave-plus-universal-relay-zen17-ver1.0-manual.pdf"
+		]
 	}
 }

package/config/devices/0x027a/zen20.json

@@ -23,10 +23,27 @@
 			"$import": "~/templates/master_template.json#base_0-65535",
 			"label": "Power (W) Report Threshold",
 			"unit": "W",
-			"defaultValue": 5
+			"defaultValue": 5,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "3",
+			"$if": "firmwareVersion >= 2.2",
+			"label": "Power (W) Report Interval",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 30,
+			"maxValue": 2678400,
+			"defaultValue": 180
+		},
+		{
+			"#": "3",
+			"$if": "firmwareVersion < 2.2",
 			"label": "Power (W) Report Interval",
 			"valueSize": 4,
 			"unit": "seconds",
@@ -47,30 +64,67 @@
 			"#": "35",
 			"$if": "firmwareVersion >= 2.3",
 			"label": "Current (A) Report Interval",
+			"description": "Allowable range: 0, 30-2678400 seconds",
 			"valueSize": 4,
 			"unit": "seconds",
-			"minValue": 5,
+			"minValue": 0,
 			"maxValue": 2678400,
-			"defaultValue": 30
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "37",
+			"$if": "firmwareVersion >= 4.10",
+			"label": "Current (A) Change Report Threshold",
+			"valueSize": 1,
+			"unit": "0.1 A",
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "36",
 			"$if": "firmwareVersion >= 2.3",
 			"label": "Voltage (V) Report Interval",
+			"description": "Allowable range: 0, 30-2678400 seconds",
 			"valueSize": 4,
 			"unit": "seconds",
-			"minValue": 5,
+			"minValue": 0,
 			"maxValue": 2678400,
-			"defaultValue": 30
+			"defaultValue": 0,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "5",
 			"label": "Overload Protection",
+			"description": "Disabling this is NOT recommended.",
 			"valueSize": 2,
 			"unit": "W",
 			"minValue": 0,
 			"maxValue": 1500,
-			"defaultValue": 1500
+			"defaultValue": 1500,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "6",
@@ -226,13 +280,25 @@
 		{
 			"#": "34",
 			"$if": "firmwareVersion >= 2.2",
-			"$import": "~/templates/master_template.json#base_enable_disable",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
 			"label": "Power/Energy Monitoring (USB)",
-			"defaultValue": 1
+			"defaultValue": 0
 		}
 	],
 	"compat": {
 		// Accumulative values are reported on the root endpoint
 		"preserveRootApplicationCCValueIDs": true
+	},
+	"metadata": {
+		"inclusion": "1. Plug the Power Strip into a grounded receptacle you’re planning to use it at (it doesn’t need to be close to the hub) \n2. Initiate inclusion (pairing) in the app (or web interface). \n3. CLICK CH1 BUTTON 3 TIMES QUICKLY. All LED indicators will start flashing \n4. You will see 7 or 8 new on/off devices in your app: 5 channels or on/off control, 2 channels for on/off monitoring (USB ports reporting charging/ charged status, no control), and possibly one master node to access and adjust advanced settings in.",
+		"exclusion": "1. Bring the strip within direct range of your Z-Wave gateway (hub). \n2. Put the Z-Wave hub into exclusion mode. \n3. Press and release the CH1 button 3 times quickly. \n4. Your hub will confirm exclusion and all of the channels (child outlets) and the main device will disappear from your controller's device list.",
+		"reset": "If your primary controller is missing or inoperable, you may need to reset \nthe device to factory settings. To complete the reset process manually, \nclick-click-click’n’hold CH1 button for at least 10 seconds. All LED indicators \nwill flash to confirm successful reset. NOTE: All previously recorded activity \nand custom settings EXCEPT for the kWh record will be erased from the device’s memory.",
+		"manual": [
+			{
+				"$if": "firmwareVersion >= 4.10",
+				"value": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-zen20-800LR-manual.pdf"
+			},
+			"https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3158/zooz-s2-z-wave-plus-power-strip-zen20-ver2-online-manual.pdf"
+		]
 	}
 }

package/config/devices/0x027a/zen30.json

@@ -304,6 +304,13 @@
 			"#": "30",
 			"$if": "firmwareVersion >= 1.11 && firmwareVersion < 2.0 || firmwareVersion >= 2.11 && firmwareVersion < 3.0 || firmwareVersion >= 3.10",
 			"$import": "templates/zooz_template.json#local_programming"
+		},
+		{
+			"#": "34",
+			"$if": "firmwareVersion >= 4.20",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "LED Indication: Settings Changed",
+			"defaultValue": 0
 		}
 	],
 	"compat": [

package/config/devices/0x027a/zen32.json

@@ -276,6 +276,14 @@
 			"label": "Send Status Change Report: Timer",
 			"description": "Determine whether a trigger of this type should prompt a status change report to associated devices.",
 			"defaultValue": 1
+		},
+		{
+			"#": "27",
+			"$if": "firmwareVersion >= 2.40 && firmwareVersion < 10.0",
+			"$import": "~/templates/master_template.json#base_enable_disable_inverted",
+			"label": "LED Indicator (Scene Control)",
+			"description": "When enabled, LED indicator will flash to confirm scene activation.",
+			"defaultValue": 0
 		}
 	],
 	"compat": {