@zwave-js/config 12.5.6 → 12.7.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (21) hide show
  1. package/build/DeviceClasses.d.ts +0 -5
  2. package/build/DeviceClasses.d.ts.map +1 -1
  3. package/build/DeviceClasses.js +12 -94
  4. package/build/DeviceClasses.js.map +1 -1
  5. package/config/deviceClasses.json +67 -555
  6. package/config/devices/0x0008/wdtc-20.json +31 -0
  7. package/config/devices/0x000c/hs-wd100.json +0 -10
  8. package/config/devices/0x0039/39358_39465_zw4002.json +1 -9
  9. package/config/devices/0x0063/10974_zw4002.json +0 -10
  10. package/config/devices/0x0063/12730_zw4002.json +1 -9
  11. package/config/devices/0x0063/14287_zw4002.json +1 -9
  12. package/config/devices/0x0063/14314_zw4002.json +1 -9
  13. package/config/devices/0x0063/45743_zw4002.json +1 -9
  14. package/config/devices/0x0063/55258_zw4002.json +1 -9
  15. package/config/devices/0x0063/55259_zw4002.json +1 -9
  16. package/config/devices/0x0184/wd-100.json +0 -10
  17. package/config/devices/0x0267/1000x080-xxx-700.json +1 -11
  18. package/config/devices/0x0315/wd-100.json +1 -11
  19. package/config/devices/0x0371/zwa024.json +4 -0
  20. package/config/devices/0x0438/4512757.json +7 -0
  21. package/package.json +3 -3
package/config/devices/0x0008/wdtc-20.json CHANGED
@@ -12,5 +12,36 @@
12
12
  "firmwareVersion": {
13
13
  "min": "0.0",
14
14
  "max": "255.255"
15
+ },
16
+ "compat": {
17
+ // The device reports version 0 for several of its command classes
18
+ "commandClasses": {
19
+ "add": {
20
+ "Binary Switch": {
21
+ "isSupported": true,
22
+ "version": 1
23
+ },
24
+ "Indicator": {
25
+ "isSupported": true,
26
+ "version": 1
27
+ },
28
+ "Multilevel Sensor": {
29
+ "isSupported": true,
30
+ "version": 1
31
+ },
32
+ "Thermostat Mode": {
33
+ "isSupported": true,
34
+ "version": 1
35
+ },
36
+ "Thermostat Setpoint": {
37
+ "isSupported": true,
38
+ "version": 1
39
+ },
40
+ "Thermostat Operating State": {
41
+ "isSupported": true,
42
+ "version": 1
43
+ }
44
+ }
45
+ }
15
46
  }
16
47
  }
package/config/devices/0x000c/hs-wd100.json CHANGED
@@ -44,16 +44,6 @@
44
44
  "label": "Local Dimming Step Duration"
45
45
  }
46
46
  ],
47
- "compat": {
48
- "commandClasses": {
49
- "remove": {
50
- "Supervision": {
51
- // The device does not support supervision although it is mandatory for the device type
52
- "endpoints": "*"
53
- }
54
- }
55
- }
56
- },
57
47
  "metadata": {
58
48
  "inclusion": "1. Turn the connected lights ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
59
49
  "exclusion": "1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Delete(Exclude) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the exclusion process is prompted by your primary controller, single click and release the rocker switch. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
package/config/devices/0x0039/39358_39465_zw4002.json CHANGED
@@ -50,15 +50,7 @@
50
50
  }
51
51
  ],
52
52
  "compat": {
53
- "mapBasicSet": "event",
54
- "commandClasses": {
55
- "remove": {
56
- "Supervision": {
57
- // The device does not support supervision although it is mandatory for the device type
58
- "endpoints": "*"
59
- }
60
- }
61
- }
53
+ "mapBasicSet": "event"
62
54
  },
63
55
  "metadata": {
64
56
  "inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press and release the top or bottom of the smart fan control switch (rocker) to include it in the network.\n3. Once your controller has confirmed the device has been included, refresh the Z-Wave network to optimize performance",
package/config/devices/0x0063/10974_zw4002.json CHANGED
@@ -13,15 +13,5 @@
13
13
  "firmwareVersion": {
14
14
  "min": "0.0",
15
15
  "max": "255.255"
16
- },
17
- "compat": {
18
- "commandClasses": {
19
- "remove": {
20
- "Supervision": {
21
- // The device does not support supervision although it is mandatory for the device type
22
- "endpoints": "*"
23
- }
24
- }
25
- }
26
16
  }
27
17
  }
package/config/devices/0x0063/12730_zw4002.json CHANGED
@@ -40,14 +40,6 @@
40
40
  }
41
41
  ],
42
42
  "compat": {
43
- "mapBasicSet": "event",
44
- "commandClasses": {
45
- "remove": {
46
- "Supervision": {
47
- // The device does not support supervision although it is mandatory for the device type
48
- "endpoints": "*"
49
- }
50
- }
51
- }
43
+ "mapBasicSet": "event"
52
44
  }
53
45
  }
package/config/devices/0x0063/14287_zw4002.json CHANGED
@@ -42,15 +42,7 @@
42
42
  }
43
43
  ],
44
44
  "compat": {
45
- "mapBasicSet": "event",
46
- "commandClasses": {
47
- "remove": {
48
- "Supervision": {
49
- // The device does not support supervision although it is mandatory for the device type
50
- "endpoints": "*"
51
- }
52
- }
53
- }
45
+ "mapBasicSet": "event"
54
46
  },
55
47
  "metadata": {
56
48
  "inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press and release the top or bottom of the smart fan control switch (rocker) to include it in the network.\n3. Once your controller has confirmed the device has been included, refresh the Z-Wave network to optimize performance",
package/config/devices/0x0063/14314_zw4002.json CHANGED
@@ -37,15 +37,7 @@
37
37
  }
38
38
  ],
39
39
  "compat": {
40
- "mapBasicSet": "event",
41
- "commandClasses": {
42
- "remove": {
43
- "Supervision": {
44
- // The device does not support supervision although it is mandatory for the device type
45
- "endpoints": "*"
46
- }
47
- }
48
- }
40
+ "mapBasicSet": "event"
49
41
  },
50
42
  "metadata": {
51
43
  "inclusion": "Linking your device\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press and release the top or\nbottom of the wireless smart switch(rocker) to include it in the network.\nNote: Your controller may need to be within 10 feet of the device to be included.\n3. Once your controller has confirmed that the device has been included, refresh the\nZ-wave network to optimize performance.\nPlease reference the controller’s manual for instructions",
package/config/devices/0x0063/45743_zw4002.json CHANGED
@@ -37,15 +37,7 @@
37
37
  }
38
38
  ],
39
39
  "compat": {
40
- "mapBasicSet": "event",
41
- "commandClasses": {
42
- "remove": {
43
- "Supervision": {
44
- // The device does not support supervision although it is mandatory for the device type
45
- "endpoints": "*"
46
- }
47
- }
48
- }
40
+ "mapBasicSet": "event"
49
41
  },
50
42
  "metadata": {
51
43
  "inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press and release the top or bottom of the smart fan control switch (rocker) to include it in the network.\n3. Once your controller has confirmed the device has been included, refresh the Z-Wave network to optimize performance",
package/config/devices/0x0063/55258_zw4002.json CHANGED
@@ -37,15 +37,7 @@
37
37
  }
38
38
  ],
39
39
  "compat": {
40
- "mapBasicSet": "event",
41
- "commandClasses": {
42
- "remove": {
43
- "Supervision": {
44
- // The device does not support supervision although it is mandatory for the device type
45
- "endpoints": "*"
46
- }
47
- }
48
- }
40
+ "mapBasicSet": "event"
49
41
  },
50
42
  "metadata": {
51
43
  "inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom rocker",
package/config/devices/0x0063/55259_zw4002.json CHANGED
@@ -37,15 +37,7 @@
37
37
  }
38
38
  ],
39
39
  "compat": {
40
- "mapBasicSet": "event",
41
- "commandClasses": {
42
- "remove": {
43
- "Supervision": {
44
- // The device does not support supervision although it is mandatory for the device type
45
- "endpoints": "*"
46
- }
47
- }
48
- }
40
+ "mapBasicSet": "event"
49
41
  },
50
42
  "metadata": {
51
43
  "inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom rocker",
package/config/devices/0x0184/wd-100.json CHANGED
@@ -40,16 +40,6 @@
40
40
  "label": "Local Dimming Step Duration"
41
41
  }
42
42
  ],
43
- "compat": {
44
- "commandClasses": {
45
- "remove": {
46
- "Supervision": {
47
- // The device does not support supervision although it is mandatory for the device type
48
- "endpoints": "*"
49
- }
50
- }
51
- }
52
- },
53
43
  "metadata": {
54
44
  "inclusion": "1. Turn the connected lights ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
55
45
  "exclusion": "1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF.\n2. Delete(Exclude) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. \n3. Normally, the sequence is as follows: when the exclusion process is prompted by your primary controller, single click and release the rocker switch. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure",
package/config/devices/0x0267/1000x080-xxx-700.json CHANGED
@@ -190,15 +190,5 @@
190
190
  }
191
191
  ]
192
192
  }
193
- ],
194
- "compat": {
195
- "commandClasses": {
196
- "remove": {
197
- // The device identifies as Z-Wave+ v2, but does not support the mandatory Supervision CC
198
- "Supervision": {
199
- "endpoints": "*"
200
- }
201
- }
202
- }
203
- }
193
+ ]
204
194
  }
package/config/devices/0x0315/wd-100.json CHANGED
@@ -70,15 +70,5 @@
70
70
  "maxValue": 255,
71
71
  "defaultValue": 3
72
72
  }
73
- ],
74
- "compat": {
75
- "commandClasses": {
76
- "remove": {
77
- "Supervision": {
78
- // The device does not support supervision although it is mandatory for the device type
79
- "endpoints": "*"
80
- }
81
- }
82
- }
83
- }
73
+ ]
84
74
  }
package/config/devices/0x0371/zwa024.json CHANGED
@@ -4,6 +4,10 @@
4
4
  "label": "ZWA024",
5
5
  "description": "MultiSensor 7",
6
6
  "devices": [
7
+ {
8
+ "productType": "0x0202",
9
+ "productId": "0x0018"
10
+ },
7
11
  {
8
12
  "productType": "0x0102",
9
13
  "productId": "0x0018",
package/config/devices/0x0438/4512757.json CHANGED
@@ -408,5 +408,12 @@
408
408
  "exclusion": "Select menu item “Net”, then find OUT and long-press M for 2s.",
409
409
  "reset": "Select menu item “Net”, then find OUT and long-press M for 2s.",
410
410
  "manual": "https://www.elektroimportoren.no/docs/lib/4512757-Manual-18.pdf"
411
+ },
412
+ "compat": {
413
+ // This device only accepts Thermostat Setpoint Set commands with a specific float encoding
414
+ "overrideFloatEncoding": {
415
+ "precision": 1,
416
+ "size": 2
417
+ }
411
418
  }
412
419
  }
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "@zwave-js/config",
3
- "version": "12.5.6",
3
+ "version": "12.7.0",
4
4
  "description": "zwave-js: configuration files",
5
5
  "publishConfig": {
6
6
  "access": "public"
@@ -55,7 +55,7 @@
55
55
  "test:dirty": "node -r ../../maintenance/esbuild-register.js ../maintenance/src/resolveDirtyTests.ts --run"
56
56
  },
57
57
  "dependencies": {
58
- "@zwave-js/core": "12.5.3",
58
+ "@zwave-js/core": "12.7.0",
59
59
  "@zwave-js/shared": "12.5.3",
60
60
  "alcalzone-shared": "^4.0.8",
61
61
  "ansi-colors": "^4.1.3",
@@ -76,7 +76,7 @@
76
76
  "@types/sinon": "^17.0.3",
77
77
  "@types/xml2js": "^0.4.14",
78
78
  "@types/yargs": "^17.0.32",
79
- "@zwave-js/maintenance": "12.5.3",
79
+ "@zwave-js/maintenance": "12.7.0",
80
80
  "ava": "^6.1.2",
81
81
  "comment-json": "^4.2.3",
82
82
  "del-cli": "^5.1.0",