@zwave-js/config 12.5.2 → 12.5.4

package/config/devices/0x001d/vrpd3.json

@@ -31,11 +31,11 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"$import": "templates/config_template.json#fade_on_time"
+			"$import": "templates/leviton_template.json#fade_on_time"
 		},
 		{
 			"#": "2",
-			"$import": "templates/config_template.json#fade_off_time"
+			"$import": "templates/leviton_template.json#fade_off_time"
 		},
 		{
 			"#": "3",
@@ -48,11 +48,11 @@
 		},
 		{
 			"#": "7",
-			"$import": "templates/config_template.json#locator_led"
+			"$import": "templates/leviton_template.json#locator_led"
 		},
 		{
 			"#": "8",
-			"$import": "templates/config_template.json#load_type"
+			"$import": "templates/leviton_template.json#load_type"
 		}
 	],
 	"metadata": {

package/config/devices/0x001d/zw15r.json

@@ -17,7 +17,7 @@
 	"paramInformation": [
 		{
 			"#": "7",
-			"$import": "templates/config_template.json#locator_led"
+			"$import": "templates/leviton_template.json#locator_led"
 		}
 	],
 	"metadata": {

package/config/devices/0x001d/zw15s.json

@@ -0,0 +1,29 @@
+{
+	"manufacturer": "Leviton",
+	"manufacturerId": "0x001d",
+	"label": "ZW15S",
+	"description": "Decora Smart 800 Series Switch",
+	"devices": [
+		{
+			"productType": "0x0042",
+			"productId": "0x0002",
+			"zwaveAllianceId": 5007
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "7",
+			"$import": "templates/leviton_template.json#status_led_800_series"
+		}
+	],
+	"metadata": {
+		"inclusion": "For older controllers, Classic Inclusion is supported.\nDepending on the age of the controller it may need to be 3 to 35 feet from the device when including.\n1. Enter setup mode (see page 10).\n2. Follow the Z-Wave controller instructions to enter inclusion mode.\n3. Tap the top rocker 1 time, the Status LED will quickly flash GREEN.\n4. The Z-Wave controller will confirm successful inclusion to the Z-Wave network",
+		"exclusion": "The Exclusion command found in the Z-Wave controller is used as a best practice for removing devices from a Z-Wave network.\n1. Enter setup mode (see page 10).\n2. Follow the Z-Wave controller instructions to enter exclusion mode.\n3. Tap the top rocker 1 time, the Status LED will quickly flash GREEN.\n4. The Z-Wave controller will confirm successful exclusion from the Z-Wave network",
+		"reset": "When removing a Z-Wave device from the network, it is best practice to use the exclusion process. In situations where a device needs to be returned to factory default settings, follow the steps below. Please use this procedure only when the network primary controller is missing or otherwise inoperable.\n1. Hold the top rocker for 14 seconds: After the first 7 seconds, the Status LED will turn AMBER. Continue holding until the Status LED flashes RED/AMBER then release.\n2. The device will reset",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=cert_portal/certs/997/DI-000-ZW15S-02A-X7.pdf"
+	}
+}

package/config/devices/0x001d/zw4sf.json

@@ -26,15 +26,15 @@
 		},
 		{
 			"#": "5",
-			"$import": "templates/config_template.json#preset_level"
+			"$import": "templates/leviton_template.json#preset_level"
 		},
 		{
 			"#": "6",
-			"$import": "templates/config_template.json#led_timeout"
+			"$import": "templates/leviton_template.json#led_timeout"
 		},
 		{
 			"#": "7",
-			"$import": "templates/config_template.json#locator_led"
+			"$import": "templates/leviton_template.json#locator_led"
 		}
 	],
 	"metadata": {

package/config/devices/0x001d/zw6hd.json

@@ -0,0 +1,61 @@
+{
+	"manufacturer": "Leviton",
+	"manufacturerId": "0x001d",
+	"label": "ZW6HD",
+	"description": "Decora Smart 800 Series Dimmer",
+	"devices": [
+		{
+			"productType": "0x0041",
+			"productId": "0x0002",
+			"zwaveAllianceId": 4901
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "templates/leviton_template.json#fade_on_time_800_series"
+		},
+		{
+			"#": "2",
+			"$import": "templates/leviton_template.json#fade_off_time_800_series"
+		},
+		{
+			"#": "3",
+			"$import": "templates/leviton_template.json#minimum_dim_level_800_series"
+		},
+		{
+			"#": "4",
+			"$import": "templates/leviton_template.json#maximum_dim_level_800_series"
+		},
+		{
+			"#": "5",
+			"$import": "templates/leviton_template.json#preset_level_800_series"
+		},
+		{
+			"#": "6",
+			"$import": "templates/leviton_template.json#led_timeout_800_series"
+		},
+		{
+			"#": "7",
+			"$import": "templates/leviton_template.json#status_led_800_series"
+		},
+		{
+			"#": "8",
+			"$import": "templates/leviton_template.json#load_type_800_series"
+		},
+		{
+			"#": "9",
+			"$import": "templates/leviton_template.json#control_timing"
+		}
+	],
+	"metadata": {
+		"inclusion": "For older controllers, Classic Inclusion is supported.\nDepending on the age of the controller it may need to be 3 to 35 feet from the device when including.\n1. Enter setup mode (see page 10).\n2. Follow the Z-Wave controller instructions to enter\ninclusion mode.\n3. Tap the top rocker 1 time, the Status LED will quickly\nflash GREEN.\n4. The Z-Wave controller will confirm successful inclusion to the Z-Wave network",
+		"exclusion": "The Exclusion command found in the Z-Wave controller is used as a best practice for removing devices from a\nZ-Wave network.\n1. Enter setup mode (see page 10).\n2. Follow the Z-Wave controller instructions to enter\nexclusion mode.\n3. Tap the top rocker 1 time, the Status LED will quickly\nflash GREEN.\n4. The Z-Wave controller will confirm successful exclusion from the Z-Wave network",
+		"reset": "When removing a Z-Wave device from the network, it is best practice to use the exclusion process. In situations where a device needs to be returned to factory default settings, follow the steps below. Please use this procedure only when the network primary controller is missing or otherwise inoperable.\n1. Hold the top rocker for 14 seconds: After the first 7 seconds, the Status LED will turn AMBER. Continue holding until the Status LED flashes RED/AMBER then release.\n2. The device will reset",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=cert_portal/certs/633/DI-000-ZW6HD-02A-X4.pdf"
+	}
+}

package/config/devices/0x0063/58433_59344_zwa4011.json

@@ -7,11 +7,77 @@
 		{
 			"productType": "0x4952",
 			"productId": "0x3239"
+		},
+		{
+			"productType": "0x4952",
+			"productId": "0x3333"
 		}
 	],
 	"firmwareVersion": {
 		"min": "0.0",
 		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Single Press",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Double Press",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#orientation"
+		},
+		{
+			"#": "5",
+			"$import": "templates/jasco_template.json#three_way_setup"
+		},
+		{
+			"#": "19",
+			"$import": "templates/jasco_template.json#alternate_exclusion"
+		},
+		{
+			"#": "34",
+			"$import": "templates/jasco_template.json#led_indicator_color"
+		},
+		{
+			"#": "35",
+			"$import": "templates/jasco_template.json#led_indicator_intensity"
+		},
+		{
+			"#": "36",
+			"$import": "templates/jasco_template.json#led_indicator_intensity",
+			"label": "Guidelight Mode Intensity"
+		},
+		{
+			"#": "39",
+			"$import": "templates/jasco_template.json#control_groups"
+		},
+		{
+			"#": "84",
+			"$import": "templates/jasco_template.json#factory_default"
+		}
+	],
+	"compat": {
+		// Enables Basic Set via Group 3 as an alternative way to detect double taps (instead of Central Scene)
+		"treatBasicSetAsEvent": true
+	},
+	"metadata": {
+		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"reset": "1. Quickly press ON (top) button three times, then immediately press the OFF (bottom) button three times. The LED will flash ON/OFF five times when completed successfully"
 	}
-	// TODO: Add configuration parameters
 }

package/config/devices/0x0063/59368_zwa4012.json

@@ -0,0 +1,80 @@
+{
+	"manufacturer": "UltraPro",
+	"manufacturerId": "0x0063",
+	"label": "59368 / ZWA4012",
+	"description": "In-Wall Toggle Switch, QFSW, 700S",
+	"devices": [
+		{
+			"productType": "0x4952",
+			"productId": "0x3334",
+			"zwaveAllianceId": 4571
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Single Press",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Double Press",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#orientation"
+		},
+		{
+			"#": "5",
+			"$import": "templates/jasco_template.json#three_way_setup"
+		},
+		{
+			"#": "19",
+			"$import": "templates/jasco_template.json#alternate_exclusion"
+		},
+		{
+			"#": "34",
+			"$import": "templates/jasco_template.json#led_indicator_color"
+		},
+		{
+			"#": "35",
+			"$import": "templates/jasco_template.json#led_indicator_intensity"
+		},
+		{
+			"#": "36",
+			"$import": "templates/jasco_template.json#led_indicator_intensity",
+			"label": "Guidelight Mode Intensity"
+		},
+		{
+			"#": "39",
+			"$import": "templates/jasco_template.json#control_groups"
+		},
+		{
+			"#": "84",
+			"$import": "templates/jasco_template.json#factory_default"
+		}
+	],
+	"compat": {
+		// Needed for double-tap support
+		"treatBasicSetAsEvent": true
+	},
+	"metadata": {
+		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"reset": "Pull the airgap switch. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds. The LED will flash once each of the 8 colors then stop"
+	}
+}

package/config/devices/0x027a/templates/zooz_template.json

@@ -231,6 +231,45 @@
 			}
 		]
 	},
+	"led_indicator_color_extended_alternate_palette": {
+		"label": "LED Indicator Color",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 6,
+		"defaultValue": 0,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "White",
+				"value": 0
+			},
+			{
+				"label": "Purple",
+				"value": 1
+			},
+			{
+				"label": "Orange",
+				"value": 2
+			},
+			{
+				"label": "Cyan",
+				"value": 3
+			},
+			{
+				"label": "Red",
+				"value": 4
+			},
+			{
+				"label": "Green",
+				"value": 5
+			},
+			{
+				"label": "Blue",
+				"value": 6
+			}
+		]
+	},
 	"led_indicator_brightness": {
 		"label": "LED Indicator Brightness",
 		"valueSize": 1,

package/config/devices/0x027a/zen32.json

@@ -2,7 +2,7 @@
 // 1.1 -> 10.0 -> 10.10 -> 10.20 -> 10.30 -> (10.40 ≅ 2.10) -> 2.20
 
 // Conditionals:
-// 10.0  and later: firmwareVersion >= 10.0 || firmwareVersion >= 2.10 && firmwareVersion < 10.0
+// 10.0 and later: firmwareVersion >= 2.10
 // 10.10 and later: firmwareVersion >= 10.10 || firmwareVersion >= 2.10 && firmwareVersion < 10.0
 // 10.20 and later: firmwareVersion >= 10.20 || firmwareVersion >= 2.10 && firmwareVersion < 10.0
 // 10.30 and later: firmwareVersion >= 10.30 || firmwareVersion >= 2.10 && firmwareVersion < 10.0
@@ -224,12 +224,12 @@
 		},
 		{
 			"#": "21",
-			"$if": "firmwareVersion >= 10.0 || firmwareVersion >= 2.10 && firmwareVersion < 10.0",
+			"$if": "firmwareVersion >= 2.10",
 			"$import": "templates/zooz_template.json#3way_switch_type"
 		},
 		{
 			"#": "22",
-			"$if": "firmwareVersion >= 10.0 || firmwareVersion >= 2.10 && firmwareVersion < 10.0",
+			"$if": "firmwareVersion >= 2.10",
 			"$import": "templates/zooz_template.json#local_programming"
 		},
 		{

package/config/devices/0x027a/zen37.json

@@ -0,0 +1,162 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZEN37 800LR",
+	"description": "Wall Remote",
+	"devices": [
+		{
+			"productType": "0x7000",
+			"productId": "0xf003"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control (Button 1 & 2)",
+			"maxNodes": 10
+		},
+		"3": {
+			"label": "On/Off Control (Button 3 & 4)",
+			"maxNodes": 10
+		},
+		"4": {
+			"label": "Dimmer Control (Button 1 & 2)",
+			"maxNodes": 10
+		},
+		"5": {
+			"label": "Dimmer Control (Button 3 & 4)",
+			"maxNodes": 10
+		},
+		"6": {
+			"label": "Toggle Control (Button 1)",
+			"maxNodes": 10
+		},
+		"7": {
+			"label": "Toggle Control (Button 2)",
+			"maxNodes": 10
+		},
+		"8": {
+			"label": "Toggle Control (Button 3)",
+			"maxNodes": 10
+		},
+		"9": {
+			"label": "Toggle Control (Button 4)",
+			"maxNodes": 10
+		}
+	},
+	// https://www.support.getzooz.com/kb/article/1511-zen37-wall-remote-advanced-settings
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Low Battery Alert Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 5,
+			"maxValue": 10,
+			"defaultValue": 5
+		},
+		{
+			"#": "2",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 1)",
+			"description": "Color of top left LED when button 1 pressed."
+		},
+		{
+			"#": "3",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 2)",
+			"description": "Color of top left LED when button 2 pressed.",
+			"defaultValue": 1
+		},
+		{
+			"#": "4",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 3)",
+			"description": "Color of top left LED when button 3 pressed.",
+			"defaultValue": 2
+		},
+		{
+			"#": "5",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 4)",
+			"description": "Color of top left LED when button 4 pressed.",
+			"defaultValue": 3
+		},
+		{
+			"#": "6",
+			"label": "LED Indicator Brightness",
+			"valueSize": 1,
+			"defaultValue": 5,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Off",
+					"value": 0
+				},
+				{
+					"label": "10%",
+					"value": 1
+				},
+				{
+					"label": "20%",
+					"value": 2
+				},
+				{
+					"label": "30%",
+					"value": 3
+				},
+				{
+					"label": "40%",
+					"value": 4
+				},
+				{
+					"label": "50%",
+					"value": 5
+				},
+				{
+					"label": "60%",
+					"value": 6
+				},
+				{
+					"label": "70%",
+					"value": 7
+				},
+				{
+					"label": "80%",
+					"value": 8
+				},
+				{
+					"label": "90%",
+					"value": 9
+				},
+				{
+					"label": "100%",
+					"value": 10
+				}
+			]
+		},
+		{
+			"#": "7",
+			"$import": "~/templates/master_template.json#base_1-99_nounit",
+			"label": "Remote Z-Wave Dimming Duration",
+			"description": "Time to dim devices in groups 4 and 5 from 0 to 100% brightness by pressing and holding the buttons.",
+			"unit": "seconds",
+			"defaultValue": 5
+		}
+	],
+	"metadata": {
+		"inclusion": "Put your Z-Wave hub into inclusion mode and click the upper paddle 6 times quickly. The LED indicator\nwill blink blue during the process and light up green once added successfully. It will light up red if failed",
+		"exclusion": "1. Bring the Remote Switch within direct range of your Z-Wave gateway (hub).\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the lower paddle 6 times very quickly\n4. Your hub will confirm exclusion and the device will disappear from your controller's device list",
+		"wakeup": "1. Bring the Remote Switch within direct range of your Z-Wave gateway (hub).\n2. Click the lower left button 6 times as quickly as possible to wake the device up\n3. Your device's indicator light will remain on to indicate that the device is awake.",
+		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the device is powered, then click the bottom right small button 6 times quickly. The LED indicator will start blinking red, then immediately click the same button 6 more times. The LED indicator will stay red for 2 seconds.",
+		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-800-series-z-wave-long-range-wall-remote-zen37-800lr-manual.pdf"
+	}
+}

package/config/devices/0x027a/zen72.json

@@ -2,7 +2,7 @@
 // 1.1 -> 10.0 -> (10.20 = 2.0) -> (10.30 = 2.10) -> (10.40 = 2.20 = 3.10) -> 3.20
 
 // Conditionals:
-// 10.0 and later: firmwareVersion >= 10.0
+// 10.0 and later: firmwareVersion >= 2.0
 // 10.20 and later: firmwareVersion >= 2.0 && firmwareVersion < 10.0 || firmwareVersion >= 10.20
 // 10.30 and later: firmwareVersion >= 2.10 && firmwareVersion < 10.0 || firmwareVersion >= 10.30
 // 10.40 and later: firmwareVersion >= 2.20 && firmwareVersion < 10.0 || firmwareVersion >= 10.40
@@ -198,7 +198,7 @@
 		},
 		{
 			"#": "26",
-			"$if": "firmwareVersion >= 10.0",
+			"$if": "firmwareVersion >= 2.0",
 			"$import": "templates/zooz_template.json#local_programming"
 		},
 		{

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "12.5.2",
+  "version": "12.5.4",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public"
@@ -55,39 +55,39 @@
     "test:dirty": "node -r ../../maintenance/esbuild-register.js ../maintenance/src/resolveDirtyTests.ts --run"
   },
   "dependencies": {
-    "@zwave-js/core": "12.5.1",
-    "@zwave-js/shared": "12.5.0",
+    "@zwave-js/core": "12.5.3",
+    "@zwave-js/shared": "12.5.3",
     "alcalzone-shared": "^4.0.8",
     "ansi-colors": "^4.1.3",
-    "fs-extra": "^11.1.1",
+    "fs-extra": "^11.2.0",
     "json-logic-js": "^2.0.2",
     "json5": "^2.2.3",
-    "semver": "^7.5.4",
-    "winston": "^3.10.0"
+    "semver": "^7.6.0",
+    "winston": "^3.13.0"
   },
   "devDependencies": {
-    "@microsoft/api-extractor": "^7.37.3",
-    "@types/fs-extra": "^11.0.1",
-    "@types/js-levenshtein": "^1.1.1",
-    "@types/json-logic-js": "^2.0.2",
-    "@types/node": "^18.17.14",
-    "@types/pegjs": "^0.10.3",
-    "@types/semver": "^7.5.1",
-    "@types/sinon": "^10.0.16",
-    "@types/xml2js": "^0.4.12",
-    "@types/yargs": "^17.0.24",
-    "@zwave-js/maintenance": "12.5.2",
-    "ava": "^5.3.1",
+    "@microsoft/api-extractor": "^7.43.0",
+    "@types/fs-extra": "^11.0.4",
+    "@types/js-levenshtein": "^1.1.3",
+    "@types/json-logic-js": "^2.0.7",
+    "@types/node": "^18.19.31",
+    "@types/pegjs": "^0.10.6",
+    "@types/semver": "^7.5.8",
+    "@types/sinon": "^17.0.3",
+    "@types/xml2js": "^0.4.14",
+    "@types/yargs": "^17.0.32",
+    "@zwave-js/maintenance": "12.5.3",
+    "ava": "^6.1.2",
     "comment-json": "^4.2.3",
     "del-cli": "^5.1.0",
-    "esbuild": "0.19.2",
-    "esbuild-register": "^3.4.2",
+    "esbuild": "0.20.2",
+    "esbuild-register": "^3.5.0",
     "got": "^13.0.0",
     "js-levenshtein": "^1.1.6",
     "pegjs": "^0.10.0",
-    "sinon": "^15.2.0",
+    "sinon": "^17.0.1",
     "ts-pegjs": "^0.3.1",
-    "typescript": "5.2.2",
+    "typescript": "5.4.4",
     "xml2js": "^0.6.2",
     "yargs": "^17.7.2"
   }