@zwave-js/config 12.5.1 → 12.5.3

package/config/devices/0x019b/leakage-stopper.json

@@ -0,0 +1,297 @@
+{
+	"manufacturer": "Heatit",
+	"manufacturerId": "0x019b",
+	"label": "BVS-ZWU",
+	"description": "Leakage Stopper",
+	"devices": [
+		{
+			"productType": "0x0101",
+			"productId": "0x000a",
+			"zwaveAllianceId": [3885, 3916]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Water Valve",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Leak Sensor",
+			"maxNodes": 5
+		},
+		"4": {
+			"label": "Overheat Alarm",
+			"maxNodes": 5
+		},
+		"5": {
+			"label": "Freeze Alarm",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "17",
+			"$import": "~/templates/master_template.json#orientation",
+			"label": "Invert Water Valve Report",
+			"description": "When enabled, the device will report off (0x00) when the valve is open, and on (0xff) when the valve is closed;"
+		},
+		{
+			"#": "18",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 2: Basic Set Value (On)",
+			"description": "Note: If parameter 17 is enabled, this level will be set when the valve is off",
+			"defaultValue": 1
+		},
+		{
+			"#": "19",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 2: Basic Set Value (Off)",
+			"description": "Note: If parameter 17 is enabled, this level will be set when the valve is on",
+			"defaultValue": 2
+		},
+		{
+			"#": "49",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 3: Water Leak Basic Set Value (Trigger)",
+			"defaultValue": 1
+		},
+		{
+			"#": "50",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 3: Water Leak Basic Set Value (Cancel)"
+		},
+		{
+			"#": "33",
+			"label": "Temperature Report Unit",
+			"valueSize": 1,
+			"defaultValue": 2,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable reports",
+					"value": 0
+				},
+				{
+					"label": "Celsius",
+					"value": 1
+				},
+				{
+					"label": "Fahrenheit",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "35[0xff]",
+			"label": "Temperature Report Offset",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "35[0xff00]",
+			"label": "Temperature Report Offset: Unit",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Celsius (Negative)",
+					"value": 16
+				},
+				{
+					"label": "Celsius (Positive)",
+					"value": 0
+				},
+				{
+					"label": "Fahrenheit (Negative)",
+					"value": 1
+				},
+				{
+					"label": "Fahrenheit (Positive)",
+					"value": 17
+				}
+			]
+		},
+		{
+			"#": "34[0xff]",
+			"label": "Temperature Change Reporting: Threshold",
+			"valueSize": 2,
+			"unit": "°F/C",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "34[0xff00]",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit",
+			"label": "Temperature Change Reporting: Unit",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "36[0xff]",
+			"label": "Overheat Trigger: Temperature",
+			"valueSize": 2,
+			"unit": "°F/C",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 104,
+			"unsigned": true
+		},
+		{
+			"#": "36[0xff00]",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit",
+			"label": "Overheat Trigger: Unit",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "37[0xff]",
+			"label": "Overheat Recover: Temperature",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 86,
+			"unsigned": true
+		},
+		{
+			"#": "37[0xff00]",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit",
+			"label": "Overheat Recover: Unit",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "38",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 4: Overheat Basic Set Value (Trigger)"
+		},
+		{
+			"#": "39",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 4: Overheat Basic Set Value (Cancel)"
+		},
+		{
+			"#": "40[0xff]",
+			"label": "Freeze Threshold: Temperature",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 32,
+			"unsigned": true
+		},
+		{
+			"#": "40[0xff00]",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit",
+			"label": "Freeze Threshold: Unit",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "41[0xff]",
+			"label": "Freeze Recover: Temperature",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 36,
+			"unsigned": true
+		},
+		{
+			"#": "41[0xff00]",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit",
+			"label": "Freeze Recover: Unit",
+			"valueSize": 2,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "43",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 5: Freeze Basic Set Value (Trigger)"
+		},
+		{
+			"#": "44",
+			"$import": "templates/heatit_template.json#association_group_control",
+			"label": "Association Group 5: Freeze Basic Set Value (Cancel)"
+		},
+		{
+			"#": "51",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Allow Valve Control - Water Leak Detected",
+			"defaultValue": 1
+		},
+		{
+			"#": "42",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Allow Valve Control - Water Leak Detected During Freeze Mode",
+			"defaultValue": 1
+		},
+		{
+			"#": "65",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Buzzer",
+			"defaultValue": 1
+		},
+		{
+			"#": "66",
+			"label": "LED Brightness Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 99,
+			"defaultValue": 80
+		},
+		{
+			"#": "67",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Touch Keylock Protection"
+		},
+		{
+			"#": "81[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Notification Report: Water Valve Open",
+			"defaultValue": 1
+		},
+		{
+			"#": "81[0x02]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Notification Report: Overheat Detection",
+			"defaultValue": 1
+		},
+		{
+			"#": "81[0x04]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Notification Report: Freeze Detection",
+			"defaultValue": 1
+		},
+		{
+			"#": "81[0x08]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Notification Report: Local Water Leak Sensor Probe Detection",
+			"defaultValue": 1
+		}
+	],
+	"metadata": {
+		"inclusion": "Set your Z-Wave Gateway into Inclusion mode / Add device.\ni. Start: Short press Touch Sense Button 3 times.\nii. Processing: Yellow LED and short beep sound keeping continue. For security inclusion support, you may need to entering first 5 digit\nthat show on QR Code label, please refer to the instructions of central controller.\niii. Success: Green LED on 1 second with 2 short beep sounds.\niv. The LED indication changes to Green LED slow blinking from Yellow LED blinking.",
+		"exclusion": "Set your Z-Wave Gateway into Exclusion mode / Remove device.\ni. Start: Short press Touch Sense Button 3 times.\nii. Processing: Yellow LED and short beep sound keeping continue.\niii. Success: Green LED on 1 second with 2 short beep sounds.\niv. The LED indication Changes to Yellow LED blinking",
+		"reset": "Start: Long hold Touch Sense Button for 10 seconds then short click 5 times.\nii. Processing: Yellow LED ON 1 second then wait 2-5 seconds.\niii. Success: Green LED on 2 second with long beep sounds for 2 seconds.\n*Factory Default Reset will:\na. Remote the BVS from Z-Wave Network;\nb. Delete the association setting;\nc. Restore the configuration settings to the default",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3885/BVS_ZWU_v1.0.9.pdf"
+	}
+}

package/config/devices/0x019b/templates/heatit_template.json

@@ -0,0 +1,21 @@
+{
+	"association_group_control": {
+		"valueSize": 1,
+		"defaultValue": 0,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Disable",
+				"value": 0
+			},
+			{
+				"label": "Basic Set on (0xff)",
+				"value": 1
+			},
+			{
+				"label": "Basic Set off (0x00)",
+				"value": 2
+			}
+		]
+	}
+}

package/config/devices/0x027a/templates/zooz_template.json

@@ -231,6 +231,45 @@
 			}
 		]
 	},
+	"led_indicator_color_extended_alternate_palette": {
+		"label": "LED Indicator Color",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 6,
+		"defaultValue": 0,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "White",
+				"value": 0
+			},
+			{
+				"label": "Purple",
+				"value": 1
+			},
+			{
+				"label": "Orange",
+				"value": 2
+			},
+			{
+				"label": "Cyan",
+				"value": 3
+			},
+			{
+				"label": "Red",
+				"value": 4
+			},
+			{
+				"label": "Green",
+				"value": 5
+			},
+			{
+				"label": "Blue",
+				"value": 6
+			}
+		]
+	},
 	"led_indicator_brightness": {
 		"label": "LED Indicator Brightness",
 		"valueSize": 1,

package/config/devices/0x027a/zen37.json

@@ -0,0 +1,162 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZEN37 800LR",
+	"description": "Wall Remote",
+	"devices": [
+		{
+			"productType": "0x7000",
+			"productId": "0xf003"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control (Button 1 & 2)",
+			"maxNodes": 10
+		},
+		"3": {
+			"label": "On/Off Control (Button 3 & 4)",
+			"maxNodes": 10
+		},
+		"4": {
+			"label": "Dimmer Control (Button 1 & 2)",
+			"maxNodes": 10
+		},
+		"5": {
+			"label": "Dimmer Control (Button 3 & 4)",
+			"maxNodes": 10
+		},
+		"6": {
+			"label": "Toggle Control (Button 1)",
+			"maxNodes": 10
+		},
+		"7": {
+			"label": "Toggle Control (Button 2)",
+			"maxNodes": 10
+		},
+		"8": {
+			"label": "Toggle Control (Button 3)",
+			"maxNodes": 10
+		},
+		"9": {
+			"label": "Toggle Control (Button 4)",
+			"maxNodes": 10
+		}
+	},
+	// https://www.support.getzooz.com/kb/article/1511-zen37-wall-remote-advanced-settings
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Low Battery Alert Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 5,
+			"maxValue": 10,
+			"defaultValue": 5
+		},
+		{
+			"#": "2",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 1)",
+			"description": "Color of top left LED when button 1 pressed."
+		},
+		{
+			"#": "3",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 2)",
+			"description": "Color of top left LED when button 2 pressed.",
+			"defaultValue": 1
+		},
+		{
+			"#": "4",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 3)",
+			"description": "Color of top left LED when button 3 pressed.",
+			"defaultValue": 2
+		},
+		{
+			"#": "5",
+			"$import": "templates/zooz_template.json#led_indicator_color_extended_alternate_palette",
+			"label": "LED Indicator Color (Button 4)",
+			"description": "Color of top left LED when button 4 pressed.",
+			"defaultValue": 3
+		},
+		{
+			"#": "6",
+			"label": "LED Indicator Brightness",
+			"valueSize": 1,
+			"defaultValue": 5,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Off",
+					"value": 0
+				},
+				{
+					"label": "10%",
+					"value": 1
+				},
+				{
+					"label": "20%",
+					"value": 2
+				},
+				{
+					"label": "30%",
+					"value": 3
+				},
+				{
+					"label": "40%",
+					"value": 4
+				},
+				{
+					"label": "50%",
+					"value": 5
+				},
+				{
+					"label": "60%",
+					"value": 6
+				},
+				{
+					"label": "70%",
+					"value": 7
+				},
+				{
+					"label": "80%",
+					"value": 8
+				},
+				{
+					"label": "90%",
+					"value": 9
+				},
+				{
+					"label": "100%",
+					"value": 10
+				}
+			]
+		},
+		{
+			"#": "7",
+			"$import": "~/templates/master_template.json#base_1-99_nounit",
+			"label": "Remote Z-Wave Dimming Duration",
+			"description": "Time to dim devices in groups 4 and 5 from 0 to 100% brightness by pressing and holding the buttons.",
+			"unit": "seconds",
+			"defaultValue": 5
+		}
+	],
+	"metadata": {
+		"inclusion": "Put your Z-Wave hub into inclusion mode and click the upper paddle 6 times quickly. The LED indicator\nwill blink blue during the process and light up green once added successfully. It will light up red if failed",
+		"exclusion": "1. Bring the Remote Switch within direct range of your Z-Wave gateway (hub).\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the lower paddle 6 times very quickly\n4. Your hub will confirm exclusion and the device will disappear from your controller's device list",
+		"wakeup": "1. Bring the Remote Switch within direct range of your Z-Wave gateway (hub).\n2. Click the lower left button 6 times as quickly as possible to wake the device up\n3. Your device's indicator light will remain on to indicate that the device is awake.",
+		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the device is powered, then click the bottom right small button 6 times quickly. The LED indicator will start blinking red, then immediately click the same button 6 more times. The LED indicator will stay red for 2 seconds.",
+		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-800-series-z-wave-long-range-wall-remote-zen37-800lr-manual.pdf"
+	}
+}

package/config/devices/0x0346/ring_smoke_co_listener.json

@@ -0,0 +1,70 @@
+{
+	"manufacturer": "Ring",
+	"manufacturerId": "0x0346",
+	"label": "4SS1S80EN0",
+	"description": "Ring Smoke/CO Listener",
+	"devices": [
+		{
+			"productType": "0x0601",
+			"productId": "0x0101",
+			"zwaveAllianceId": 3161
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Battery Report Interval",
+			"description": "Allowable range: 255-4200 in increments of 255.",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 255,
+			"maxValue": 4200,
+			"defaultValue": 4200
+		},
+		{
+			"#": "2",
+			"label": "Listening Mode",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Smoke detector siren only",
+					"value": 1
+				},
+				{
+					"label": "Smoke & CO detector sirens",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Test Mode",
+			"description": "Disabled automatically after 15 minutes of inactivity",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Cancel / Idle",
+					"value": 0
+				},
+				{
+					"label": "Start",
+					"value": 1
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "Inclusion Instructions -\nBegin the setup process near your Ring Alarm Base Station.\nIn the Ring app, tap Set Up a Device. Choose Security Devices, then Sensors, then Ring Smoke/CO Listener, then tap Add Device.To complete the setup process, follow the in-app instructions.\n\nWhen prompted, scan the QR Code or enter the PIN.\nThis begins the pairing process. The QR Code and PIN are on the back of your Listener and in the product packaging.\n\nWhen prompted, pull out the clear tab.\nThis turns the Listener on. Your Alarm Base Station then finds it automatically.\nAs the Listener pairs to your Alarm Base Station, its LED ring blinks slowly, then quickly. Once it pairs, the LED glows blue for three seconds.",
+		"exclusion": "Exclusion Instructions - \nto remove Ring Smoke/CO Listener from your system:\nOpen the side menu in the Ring app and tap Devices, then Base Station. Next, select your Listener and tap the gear- shaped icon. Then tap Remove Device.\nWhen prompted, open the Listener and remove and reinstall the battery to complete the removal.",
+		"reset": "Reset Instructions -\nTo factory reset, press and hold the Setup button for 10 seconds. When the LED ring stops blinking, your Listener has reset.\nThis process disconnects the Listener from Ring Alarm. To begin using the Listener again, repeat the setup process in the Ring app.\nNote: Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3161/Ring Smoke-CO Listerner Zwave Manual.pdf"
+	}
+}