@zwave-js/config 10.3.1 → 10.5.0

package/config/devices/0x039a/INT-SMMD-N1.json

@@ -0,0 +1,258 @@
+{
+	"manufacturer": "Inteset",
+	"manufacturerId": "0x039a",
+	"label": "INT-SMMD-N1",
+	"description": "Inteset PIR Motion Sensor",
+	"devices": [
+		{
+			"productType": "0x0003",
+			"productId": "0x0106"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Motion Sensitivity",
+			"description": "Higher values = lower sensitivity and lower range.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 99,
+			"defaultValue": 3
+		},
+		{
+			"#": "2",
+			"label": "Motion Window Time",
+			"description": "The amount of time the moves specified in parameter #3 need to take place in for the sensor to report motion. Higher values = more sensitive.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 2,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "4s",
+					"value": 0
+				},
+				{
+					"label": "8s",
+					"value": 1
+				},
+				{
+					"label": "12s",
+					"value": 2
+				},
+				{
+					"label": "16s",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Pulse Count",
+			"description": "Number of moves required for the sensor to report motion. Higher values = less sensitive.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 1,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "1",
+					"value": 0
+				},
+				{
+					"label": "2",
+					"value": 1
+				},
+				{
+					"label": "3",
+					"value": 2
+				},
+				{
+					"label": "4",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Motion Blind Time",
+			"description": "The amount of time the sensor will not report motion after it has reported motion.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 15,
+			"defaultValue": 15,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "0.5s",
+					"value": 0
+				},
+				{
+					"label": "1s",
+					"value": 1
+				},
+				{
+					"label": "1.5s",
+					"value": 2
+				},
+				{
+					"label": "2s",
+					"value": 3
+				},
+				{
+					"label": "2.5s",
+					"value": 4
+				},
+				{
+					"label": "3s",
+					"value": 5
+				},
+				{
+					"label": "3.5s",
+					"value": 6
+				},
+				{
+					"label": "4s",
+					"value": 7
+				},
+				{
+					"label": "4.5s",
+					"value": 8
+				},
+				{
+					"label": "5s",
+					"value": 9
+				},
+				{
+					"label": "5.5s",
+					"value": 10
+				},
+				{
+					"label": "6s",
+					"value": 11
+				},
+				{
+					"label": "6.5s",
+					"value": 12
+				},
+				{
+					"label": "7s",
+					"value": 13
+				},
+				{
+					"label": "7.5s",
+					"value": 14
+				},
+				{
+					"label": "8s",
+					"value": 15
+				}
+			]
+		},
+		{
+			"#": "5",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Enable Motion Sensor",
+			"defaultValue": 1
+		},
+		{
+			"#": "6",
+			"label": "Motion Clear Time",
+			"description": "How long the sensor will wait before reporting no motion",
+			"unit": "seconds",
+			"valueSize": 2,
+			"minValue": 10,
+			"maxValue": 3600,
+			"defaultValue": 30
+		},
+		{
+			"#": "7",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "LED Indicator: Blink on Motion",
+			"defaultValue": 1
+		},
+		{
+			"#": "8",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Binary Sensor Reports"
+		},
+		{
+			"#": "9",
+			"label": "Group 2: Basic Set Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 100,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Off (0x00)",
+					"value": 0
+				},
+				{
+					"label": "On (0xff)",
+					"value": 100
+				}
+			]
+		},
+		{
+			"#": "10",
+			"label": "Brightness Measuring Interval",
+			"unit": "seconds",
+			"valueSize": 2,
+			"minValue": 30,
+			"maxValue": 3600,
+			"defaultValue": 180
+		},
+		{
+			"#": "11",
+			"label": "Brightness Change Report Threshold",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 50
+		},
+		{
+			"#": "12",
+			"label": "Night/Day Brightness Threshold",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 50
+		},
+		{
+			"#": "13",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Report Motion Only At Night",
+			"description": "When enabled, the sensor will report motion only when the ambient brightness is below the value set in parameter #12."
+		},
+		{
+			"#": "14",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Send Repeat Motion Event While Active"
+		},
+		{
+			"#": "99",
+			"label": "Brightness Calibration Factor",
+			"valueSize": 2,
+			"unit": "1/1000",
+			"minValue": 1,
+			"maxValue": 65535,
+			"defaultValue": 1000,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"wakeup": "Press the button briefly",
+		"inclusion": "Press the button 3 times within 1.5s to enter inclusion mode.",
+		"exclusion": "Press the button 3 times within 1.5s",
+		"reset": "Press and hold the button for 10s until LED light is on, then release the button.",
+		"manual": "http://downloads.inteset.com/Motion2In1ManualS2.pdf"
+	}
+}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@zwave-js/config",
-  "version": "10.3.1",
+  "version": "10.5.0",
   "description": "zwave-js: configuration files",
   "publishConfig": {
     "access": "public",
@@ -65,29 +65,29 @@
     "lint:prettier:fix": "yarn run lint:prettier -w"
   },
   "dependencies": {
-    "@zwave-js/core": "10.3.0",
-    "@zwave-js/shared": "10.3.0",
+    "@zwave-js/core": "10.5.0",
+    "@zwave-js/shared": "10.4.0",
     "alcalzone-shared": "^4.0.8",
     "ansi-colors": "^4.1.3",
     "fs-extra": "^10.1.0",
     "json-logic-js": "^2.0.2",
-    "json5": "^2.2.1",
+    "json5": "^2.2.2",
     "semver": "^7.3.7",
     "winston": "^3.8.2"
   },
   "devDependencies": {
-    "@esm2cjs/got": "^12.4.1",
+    "@esm2cjs/got": "^12.5.3",
     "@microsoft/api-extractor": "*",
     "@types/fs-extra": "^9.0.13",
     "@types/jest": "^29.0.2",
     "@types/js-levenshtein": "^1.1.1",
     "@types/json-logic-js": "^2.0.1",
-    "@types/node": "^14.18.29",
+    "@types/node": "^14.18.36",
     "@types/pegjs": "^0.10.3",
     "@types/semver": "^7.3.12",
     "@types/xml2js": "^0.4.11",
     "@types/yargs": "^17.0.12",
-    "@zwave-js/maintenance": "10.3.0",
+    "@zwave-js/maintenance": "10.5.0",
     "comment-json": "^4.2.3",
     "del-cli": "^5.0.0",
     "esbuild": "0.15.7",
@@ -95,9 +95,9 @@
     "jest-extended": "^2.0.0",
     "js-levenshtein": "^1.1.6",
     "pegjs": "^0.10.0",
-    "prettier": "^2.7.1",
+    "prettier": "^2.8.1",
     "ts-pegjs": "^0.3.1",
-    "typescript": "4.8.3",
+    "typescript": "4.9.4",
     "xml2js": "^0.4.23",
     "yargs": "^17.5.1"
   }