@zwave-js/config 10.3.0 → 10.4.0

package/config/devices/0x014f/pd300emz5-1.json

@@ -24,7 +24,8 @@
 		},
 		{
 			"#": "7",
-			"$import": "templates/config_template.json#dim_step_zwave"
+			"$import": "templates/config_template.json#dim_step_zwave",
+			"valueSize": 2
 		},
 		{
 			"#": "8",
@@ -44,11 +45,13 @@
 		},
 		{
 			"#": "13",
-			"$import": "templates/config_template.json#report_interval"
+			"$import": "templates/config_template.json#report_interval",
+			"valueSize": 2
 		},
 		{
 			"#": "16",
-			"$import": "templates/config_template.json#dim_rate_manual"
+			"$import": "templates/config_template.json#dim_rate_manual",
+			"valueSize": 2
 		},
 		{
 			"#": "17",
@@ -56,7 +59,8 @@
 		},
 		{
 			"#": "18",
-			"$import": "templates/config_template.json#dim_rate_all"
+			"$import": "templates/config_template.json#dim_rate_all",
+			"valueSize": 2
 		}
 	]
 }

package/config/devices/0x014f/ps15emz51.json

@@ -32,7 +32,8 @@
 		},
 		{
 			"#": "13",
-			"$import": "templates/config_template.json#report_interval"
+			"$import": "templates/config_template.json#report_interval",
+			"valueSize": 2
 		}
 	],
 	"metadata": {

package/config/devices/0x0178/ZSENS930.json

@@ -0,0 +1,348 @@
+{
+	"manufacturer": "Nexia Home Intelligence",
+	"manufacturerId": "0x0178",
+	"label": "ZSENS930",
+	"description": "Remote Temperature and Humidity Sensor",
+	"devices": [
+		{
+			"productType": "0x5253",
+			"productId": "0x5433",
+			"zwaveAllianceId": 1939
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Battery Reporting Interval",
+			"valueSize": 1,
+			"unit": "hours",
+			"minValue": 0,
+			"maxValue": 127,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "8",
+			"label": "Temperature Delta Report Threshold (Group 1)",
+			"unit": "0.1°",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 200,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "9",
+			"label": "Periodic Temperature Report Interval (Group 1)",
+			"unit": "minutes",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "10",
+			"label": "Temperature Delta Report Threshold (Group 2)",
+			"valueSize": 1,
+			"unit": "0.1°",
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "11",
+			"label": "Periodic Temperature Report Interval (Group 2)",
+			"unit": "minutes",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "16",
+			"label": "Humidity Threshold (Group 1)",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 50,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "17",
+			"label": "Humidity Report Interval (Group 1)",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "18",
+			"label": "Humidity Threshold (Group 3)",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 30,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "19",
+			"label": "Humidity Report Interval (Group 3)",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "20",
+			"label": "Basic Set Commands",
+			"description": "Determines which combination of Basic Set commands will be sent",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Enable Parameters 2, 5, 12, 15",
+					"value": 1
+				},
+				{
+					"label": "Enable Parameters 2, 5, 13, 14",
+					"value": 2
+				},
+				{
+					"label": "Enable Parameters 3, 4, 12, 15",
+					"value": 3
+				},
+				{
+					"label": "Enable Parameters 3, 4, 13, 14",
+					"value": 4
+				}
+			]
+		},
+		{
+			"#": "6",
+			"label": "Basic Set Retry Attempts",
+			"description": "Number of extra attempts sent every minute",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 5,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "Send Basic Set On: Above Temperature",
+			"valueSize": 1,
+			"minValue": 15,
+			"maxValue": 121,
+			"defaultValue": 121,
+			"unsigned": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 121
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Send Basic Set On: Below Temperature",
+			"valueSize": 1,
+			"minValue": 15,
+			"maxValue": 121,
+			"defaultValue": 121,
+			"unsigned": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 121
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Send Basic Set Off: Above Temperature",
+			"valueSize": 1,
+			"minValue": 15,
+			"maxValue": 121,
+			"defaultValue": 121,
+			"unsigned": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 121
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Send Basic Set Off: Below Temperature",
+			"valueSize": 1,
+			"minValue": 15,
+			"maxValue": 121,
+			"defaultValue": 121,
+			"unsigned": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 121
+				}
+			]
+		},
+		{
+			"#": "12",
+			"label": "Send Basic Set On: Above Humidity Level",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "13",
+			"label": "Send Basic Set On: Below Humidity Level",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "14",
+			"label": "Send Basic Set Off: Above Humidity Level",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "15",
+			"label": "Send Basic Set Off: Below Humidity Level",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "7",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit",
+			"defaultValue": 1
+		},
+		{
+			"#": "21",
+			"label": "Temperature Offset Correction",
+			"description": "Correct deviations in the device's temperature reading.",
+			"valueSize": 1,
+			"unit": "°F",
+			"minValue": -7,
+			"maxValue": 7,
+			"defaultValue": 0,
+			"unsigned": false
+		},
+		{
+			"#": "22",
+			"label": "Humidity Offset Correction",
+			"description": "Correct deviations in the device's humidity reading.",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": -7,
+			"maxValue": 7,
+			"defaultValue": 0,
+			"unsigned": false
+		},
+		{
+			"#": "23",
+			"label": "Humidity Filter Time Constant",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 60,
+			"defaultValue": 30,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Set your primary controller into inclusion mode. Press and release the \"Install\" button on the sensor. The \"Status\" LED will blink rapidly for 3 seconds indicating successful inclusion into the network",
+		"exclusion": "Set your primary controller into exclusion mode. Press and release the \"Install\" button on the sensor. The \"Status\" LED will blink rapidly for 3 seconds indicating successful exclusion from the network",
+		"reset": "Press and hold Install button for 10 seconds. Factory Reset should only be used if the primary controller is missing or inoperable."
+	}
+}

package/config/devices/0x018c/pm-240-zw.json

@@ -0,0 +1,26 @@
+{
+	"manufacturer": "Dawon",
+	"manufacturerId": "0x018c",
+	"label": "PM-S240-ZW",
+	"description": "2-Channel Power Switch",
+	"devices": [
+		{
+			"productType": "0x0065",
+			"productId": "0x0001"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"compat": {
+		"commandClasses": {
+			"remove": {
+				// The device seems to report support for Supervision but ignores the commands
+				"0x6c": {
+					"endpoints": "*"
+				}
+			}
+		}
+	}
+}

package/config/devices/0x019a/11-01-011.json

@@ -62,5 +62,12 @@
 				}
 			]
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "Set your controller in include mode. Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds. A long LED blink indicates that the inclusion was successful.",
+		"exclusion": "Set your controller in exclude mode. Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds. A long LED blink indicates that the exclusion was successful.",
+		"wakeup": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, A LED blink indicates success.",
+		"reset": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, but on the 3rd repetition, leave the magnet at the rounded edge for 10 seconds. A long LED signal indicates success.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=Manuals/3388/Strips%20Guard%20EU%20R3.pdf"
+	}
 }

package/config/devices/0x019a/11_01_022.json

@@ -149,9 +149,10 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Set your controller in add or remove mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the add/remove was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
-		"exclusion": "Set your controller in add or remove mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the add/remove was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
+		"inclusion": "Set your controller in include mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the inclusion was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
+		"exclusion": "Set your controller in exclude mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the exclusion was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
 		"reset": "You may need to reset Strips if your Z-Wave controller is missing or not responding.\n\nFollow the instructions for “Wake up” above, but on the 3rd repetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"wakeup": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, A LED blink indicates success.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4300/Strips%20Drip%20700%20manual.pdf"
 	}
 }

package/config/devices/0x019a/11_02_011.json

@@ -335,5 +335,12 @@
 			"maxValue": 120,
 			"defaultValue": 0
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "Set your controller in include mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the inclusion was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
+		"exclusion": "Set your controller in exclude mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the exclusion was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
+		"reset": "You may need to reset Strips if your Z-Wave controller is missing or not responding.\n\nFollow the instructions for “Wake up” above, but on the 3rd repetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"wakeup": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, A LED blink indicates success.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3346/Strips%20Multi-Sensors%20EU%20manuals.pdf"
+	}
 }

package/config/devices/0x019a/11_02_022.json

@@ -310,9 +310,10 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Place the controller into pairing mode and perform the \"wake up\" pattern as described below.\n\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
-		"exclusion": "Place the controller into remove mode and perform the \"wake up\" pattern as described below.\n\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"inclusion": "Place the controller into inclusion mode and perform the \"wake up\" pattern as described below.\n\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"exclusion": "Place the controller into exclusion mode and perform the \"wake up\" pattern as described below.\n\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
 		"reset": "You may need to reset Strips if your Z-Wave controller is missing or not responding. Follow the instructions for Wake Up above, but on the 3rd\nrepetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"wakeup": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, A LED blink indicates success.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4106/Strips%20Comfort%20700%20v1.6.pdf"
 	}
 }

package/config/devices/0x019a/11_04_21_22_28.json

@@ -200,9 +200,10 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Place the controller into pairing or exclude mode and perform the \"wake up\" pattern as described below.\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
-		"exclusion": "Place the controller into exclude mode and perform the \"wake up\" pattern as described below.\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"inclusion": "Place the controller into inclusion mode and perform the \"wake up\" pattern as described below.\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the inclusion was successful",
+		"exclusion": "Place the controller into exclusion mode and perform the \"wake up\" pattern as described below.\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the exclusion was successful",
 		"reset": "Follow the instructions for Wake Up above, but on the 3rd repetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"wakeup": "Place a magnet at the rounded edge. When the LED blinks, move the magnet away. Repeat a total of 3 times within 10 seconds, A LED blink indicates success.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4301/Strips%20Drip%20700%20manual.pdf"
 	}
 }

package/config/devices/0x027a/zac93.json

@@ -0,0 +1,16 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZAC93",
+	"description": "800 Series Long Range GPIO Module",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x0611"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+}

package/config/devices/0x027a/zen72.json

@@ -114,6 +114,21 @@
 			"#": "26",
 			"$if": "firmwareVersion >= 10.0",
 			"$import": "templates/zooz_template.json#local_programming"
+		},
+		{
+			"#": "27",
+			"$if": "firmwareVersion >= 10.10",
+			"$import": "templates/zooz_template.json#dimmer_off_ramp_rate"
+		},
+		{
+			"#": "28",
+			"$if": "firmwareVersion >= 10.10",
+			"$import": "templates/zooz_template.json#zwave_on_dimmer_ramp_rate"
+		},
+		{
+			"#": "29",
+			"$if": "firmwareVersion >= 10.10",
+			"$import": "templates/zooz_template.json#zwave_off_dimmer_ramp_rate"
 		}
 	],
 	"compat": {

package/config/devices/0x027a/zen74.json

@@ -99,6 +99,21 @@
 			"#": "26",
 			"$if": "firmwareVersion >= 10.0",
 			"$import": "templates/zooz_template.json#local_programming"
+		},
+		{
+			"#": "27",
+			"$if": "firmwareVersion >= 10.10",
+			"$import": "templates/zooz_template.json#dimmer_off_ramp_rate"
+		},
+		{
+			"#": "28",
+			"$if": "firmwareVersion >= 10.10",
+			"$import": "templates/zooz_template.json#zwave_on_dimmer_ramp_rate"
+		},
+		{
+			"#": "29",
+			"$if": "firmwareVersion >= 10.10",
+			"$import": "templates/zooz_template.json#zwave_off_dimmer_ramp_rate"
 		}
 	],
 	"compat": {

package/config/devices/0x027a/zse29.json

@@ -141,5 +141,15 @@
 		"exclusion": "1. Bring the sensor within direct range of your Z-Wave\ngateway (hub).\n2. Put the Z-Wave hub into exclusion mode (not sure\nhow to do that? ask@getzooz.com).\n3. Press and release the tamper switch 3 times quickly.\n4. Your hub will confirm exclusion and the sensor will\ndisappear from your controller's device list",
 		"reset": "When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then CLICKCLICK-CLICK-CLICK’N’HOLD the tamper switch for AT LEAST 5 SECONDS. The LED indicator will turn off to\nindicate successful reset. The sensor will then enter auto-inclusion mode for 4 minutes.\nNOTE: All previously recorded activity and custom settings will be erased from the device’s memory.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3081/zooz-z-wave-plus-s2-outdoor-motion-sensor-zse29-manual.pdf"
+	},
+	"compat": {
+		"commandClasses": {
+			"remove": {
+				// Supervised commands always result in a status of "Fail"
+				"0x6c": {
+					"endpoints": "*"
+				}
+			}
+		}
 	}
 }

package/config/devices/0x027a/zse41.json

@@ -70,6 +70,11 @@
 			"unit": "seconds"
 		}
 	],
+	"compat": {
+		// The device sends Configuration CC info reports in 4-byte chunks, causing each query to block the network for roughly 1.5 seconds.
+		"skipConfigurationNameQuery": true,
+		"skipConfigurationInfoQuery": true
+	},
 	"metadata": {
 		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\n\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
 		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",

package/config/devices/0x027a/zse42.json

@@ -68,6 +68,11 @@
 			]
 		}
 	],
+	"compat": {
+		// The device sends Configuration CC info reports in 4-byte chunks, causing each query to block the network for roughly 1.5 seconds.
+		"skipConfigurationNameQuery": true,
+		"skipConfigurationInfoQuery": true
+	},
 	"metadata": {
 		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
 		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",

package/config/devices/0x027a/zst39lr.json

@@ -0,0 +1,16 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZST39 LR",
+	"description": "800 Series Long Range USB Controller",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x0610"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+}

package/config/devices/0x029c/o2_smart_box_2.json

@@ -0,0 +1,30 @@
+{
+	"manufacturer": "SoftAtHome",
+	"manufacturerId": "0x029c",
+	"label": "O2",
+	"description": "O2 Smart Box 2",
+	"devices": [
+		{
+			"productType": "0x0001",
+			"productId": "0x0002",
+			"zwaveAllianceId": 4476
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"inclusion": "O2 Smart Box is mainly controlled from within O2 Smart Box application for smartphones. \nIn section Add new device in our application, customer selects type of device and application activates inclusion mode at the gateway",
+		"exclusion": "O2 Smart Box is mainly controlled from within O2 Smart Box application for smartphones. \nIn detail of every Z-Wave device, customer can find option to \"Unpair device\". When he selects this option, gateway enters exclusion mode and instruction how to exclude this device is shown in application (e.g. Click the pairing button three times within one second)",
+		"reset": "Select the Factory Reset item in the Advanced drop-down menu in WebUI.\nSelect the Factory Reset item in settings section in O2 Smart Box application",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4476/sb2_manual%20(1).pdf"
+	}
+}