@zwave-js/config 10.3.0 → 10.3.1

package/config/devices/0x0129/yrd652-zw2.json

@@ -0,0 +1,85 @@
+{
+	"manufacturer": "Yale",
+	"manufacturerId": "0x0129",
+	"label": "YRD652-ZW2",
+	"description": "Assure Lock® SL Key Free Touchscreen Deadbolt",
+	"devices": [
+		{
+			"productType": "0x8109",
+			"productId": "0x0dd5",
+			"zwaveAllianceId": 4642
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "8",
+			"$import": "templates/yale_template.json#operating_mode"
+		},
+		{
+			"#": "13",
+			"$import": "templates/yale_template.json#lock_status_led"
+		},
+		{
+			"#": "21",
+			"$import": "templates/yale_template.json#eco_mode"
+		},
+		{
+			"#": "11",
+			"$import": "templates/yale_template.json#one_touch"
+		},
+		{
+			"#": "12",
+			"$import": "templates/yale_template.json#privacy_button"
+		},
+		{
+			"#": "1",
+			"$import": "templates/yale_template.json#volume"
+		},
+		{
+			"#": "2",
+			"$import": "templates/yale_template.json#auto_relock"
+		},
+		{
+			"#": "3",
+			"$import": "templates/yale_template.json#auto_relock_time_180"
+		},
+		{
+			"#": "4",
+			"$import": "templates/yale_template.json#wrong_code_limit_3_to_10"
+		},
+		{
+			"#": "7",
+			"$import": "templates/yale_template.json#wrong_code_lockout"
+		},
+		{
+			"#": "16",
+			"$import": "templates/yale_template.json#enable_escape_mode"
+		},
+
+		{
+			"#": "5",
+			"$import": "templates/yale_template.json#language"
+		},
+		{
+			"#": "15",
+			"$import": "templates/yale_template.json#reset_factory_255"
+		}
+	],
+	"metadata": {
+		"inclusion": "Enter the 4-8 master Pin code followed by the gear key.\nPress the 7 key followed by the gear key\nPress the 1 key followed by the gear key",
+		"exclusion": "Enter the 4-8 digit master pin code followed by the gear key\nPress the 7 key followed by the gear key\nPress the 3 key followed by the gear key",
+		"reset": "Remove the battery cover and batteries.\nRemove the interior escutcheon to access the reset button.\nThe reset button is located above the PCB cable connector.\nWhile pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.\nReplace battery cover. \nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4642/Binder1.pdf"
+	}
+}

package/config/devices/0x0129/yrd652-zw3.json

@@ -0,0 +1,79 @@
+{
+	"manufacturer": "Yale",
+	"manufacturerId": "0x0129",
+	"label": "YRD652-ZW3",
+	"description": "Yale Real Living® Assure Lock® SL Key Free Touchscreen Deadbolt",
+	"devices": [
+		{
+			"productType": "0x8101",
+			"productId": "0x8109",
+			"zwaveAllianceId": 4672
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "8",
+			"$import": "templates/yale_template.json#operating_mode"
+		},
+		{
+			"#": "1",
+			"$import": "templates/yale_template.json#volume"
+		},
+		{
+			"#": "11",
+			"$import": "templates/yale_template.json#one_touch"
+		},
+		{
+			"#": "12",
+			"$import": "templates/yale_template.json#privacy_button"
+		},
+		{
+			"#": "13",
+			"$import": "templates/yale_template.json#lock_status_led"
+		},
+		{
+			"#": "2",
+			"$import": "templates/yale_template.json#auto_relock"
+		},
+		{
+			"#": "3",
+			"$import": "templates/yale_template.json#auto_relock_time_180"
+		},
+		{
+			"#": "28",
+			"label": "Expiring Pin Code Enabled Time",
+			"description": "0",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "4",
+			"$import": "templates/yale_template.json#wrong_code_limit_3_to_10"
+		},
+		{
+			"#": "7",
+			"$import": "templates/yale_template.json#wrong_code_lockout"
+		},
+		{
+			"#": "5",
+			"$import": "templates/yale_template.json#language"
+		}
+	],
+	"metadata": {
+		"reset": "When lock is reset to factory defaults all Entry Codes\n(including the Master Entry Code*) are deleted and all\nprogramming features are reset to original default\nsettings (see below).\n1. Remove battery cover and batteries.\n2. Remove inside lock to access reset button.\n3. Reset button (see image at right) is located beside\ncable adapter.\n4. While pressing reset button reinstall batteries. Hold\nreset button a minimum of 3 seconds then release.\n5. Replace battery cover.\nAfter reset, Master Entry Code creation is the only\noption available and must be performed prior to\nany other programming of the lock"
+	}
+}

package/config/devices/0x0129/yrl256.json

@@ -0,0 +1,101 @@
+{
+	"manufacturer": "Yale",
+	"manufacturerId": "0x0129",
+	"label": "YRL256",
+	"description": "Assure Lever Lock",
+	"devices": [
+		{
+			"productType": "0x800c",
+			"productId": "0x4f00"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "templates/yale_template.json#volume"
+		},
+		{
+			"#": "2",
+			"$import": "templates/yale_template.json#auto_relock"
+		},
+		{
+			"#": "3",
+			"$import": "templates/yale_template.json#auto_relock_time_180"
+		},
+		{
+			"#": "4",
+			"$import": "templates/yale_template.json#wrong_code_limit_10"
+		},
+		{
+			"#": "5",
+			"$import": "templates/yale_template.json#language"
+		},
+		{
+			"#": "7",
+			"$import": "templates/yale_template.json#wrong_code_lockout_10_to_127"
+		},
+		{
+			"#": "8",
+			"$import": "templates/yale_template.json#operating_mode"
+		},
+		{
+			"#": "11",
+			"$import": "templates/yale_template.json#one_touch"
+		},
+		{
+			"#": "12",
+			"$import": "templates/yale_template.json#privacy_button"
+		},
+		{
+			"#": "13",
+			"$import": "templates/yale_template.json#lock_status_led"
+		},
+		{
+			"#": "15",
+			"$import": "templates/yale_template.json#reset_factory"
+		}
+	],
+	"compat": {
+		"alarmMapping": [
+			{
+				"$import": "templates/yale_template.json#alarm_map_keypad_limit"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_manual_unlock"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_rf_unlock"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_keypad_unlock"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_manual_lock"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_rf_lock"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_keypad_lock"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_deadbolt_jammed"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_low_battery"
+			},
+			{
+				"$import": "templates/yale_template.json#alarm_map_auto_relock"
+			}
+		]
+	},
+	"metadata": {
+		"inclusion": "Install Yale Smart Module into slot above battery compartment\nIMPORTANT: Batteries must be removed before inserting Yale Smart Module:\n• Remove battery cover\n• Remove batteries\n• Insert Yale Smart Module\n• Reinstall batteries\n• Reinstall battery cover\n2. Open Z-Wave system's smart home or alarm app on your smartphone or tablet\n3. If you have Smart Start* enabled with your Z-Wave System follow in-app prompts to add a new device\nIf you don't have smart start or are not sure, follow steps 4 - 6\n4. On your lock keypad, enter your master entry code followed by the gear icon\n5. Press the 7 key followed by the gear icon\n6. Press the 1 key followed by the gear icon",
+		"exclusion": "Open Z-Wave system's smart home or alarm app and follow instructions for removing a device\n2. On your lock keypad, enter your master entry code followed by the icon\n3. Press the 7 key followed by the gear icon\n4. Press the 3 key followed by the gear icon",
+		"reset": "Remove the battery cover and batteries.\nRemove the interior escutcheon to access the reset button.\nThe reset button is located above the PCB cable connector.\nWhile pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.\nReplace battery cover. \nPlease use this procedure only when the network primary controller is missing or otherwise inoperable"
+	}
+}

package/config/devices/0x012a/qz2142-840.json

@@ -0,0 +1,238 @@
+{
+	"manufacturer": "Qolsys",
+	"manufacturerId": "0x012a",
+	"label": "QZ2142-840",
+	"description": "IQ Smart Dimmer",
+	"devices": [
+		{
+			"productType": "0xff00",
+			"productId": "0xff0d",
+			"zwaveAllianceId": 4463
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off Control",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "On/Off Control",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "2",
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
+		},
+		{
+			"#": "3",
+			"label": "Auto Off Timer",
+			"valueSize": 4,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "Auto On Timer",
+			"valueSize": 4,
+			"minValue": 0,
+			"maxValue": 65535,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "8",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev"
+		},
+		{
+			"#": "9",
+			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds",
+			"defaultValue": 1
+		},
+		{
+			"#": "10",
+			"$import": "~/templates/master_template.json#minimum_dim_level_0-99"
+		},
+		{
+			"#": "11",
+			"$import": "~/templates/master_template.json#maximum_dim_level_0-100",
+			"defaultValue": 99
+		},
+		{
+			"#": "25",
+			"label": "Brightness on Single Tap",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Last brightness level",
+					"value": 0
+				},
+				{
+					"label": "Custom value set in parameter 18",
+					"value": 1
+				},
+				{
+					"label": "Maximum brightness set in parameter 11",
+					"value": 2
+				},
+				{
+					"label": "Full 100% brightness",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "12",
+			"label": "Brightness on Double Tap",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Full brightness",
+					"value": 0
+				},
+				{
+					"label": "Custom value in parameter 18",
+					"value": 1
+				},
+				{
+					"label": "Maximum brightness based in parameter 11",
+					"value": 2
+				},
+				{
+					"label": "Disable",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "15",
+			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
+		},
+		{
+			"#": "21",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Reporting in Smart Switch Mode"
+		},
+		{
+			"#": "16",
+			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds",
+			"label": "Dimmer Speed (Press & Hold)",
+			"defaultValue": 5
+		},
+		{
+			"#": "18",
+			"$import": "~/templates/master_template.json#default_dim_level_0-99"
+		},
+		{
+			"#": "20",
+			"label": "Association Reports",
+			"valueSize": 1,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Multilevel report; basic report for long press with relay enabled",
+					"value": 0
+				},
+				{
+					"label": "Multilevel report; basic report for long press with relay disabled",
+					"value": 1
+				},
+				{
+					"label": "Multilevel report",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "22",
+			"label": "Night Mode: Brightness Level",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 99,
+			"defaultValue": 20,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disabled",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "23",
+			"label": "Led Indicator Color",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "White",
+					"value": 0
+				},
+				{
+					"label": "Blue",
+					"value": 1
+				},
+				{
+					"label": "Green",
+					"value": 2
+				},
+				{
+					"label": "Red",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "24",
+			"label": "Led Indicator Brightness",
+			"valueSize": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Low (30%)",
+					"value": 2
+				},
+				{
+					"label": "Medium (60%)",
+					"value": 1
+				},
+				{
+					"label": "Bright (100%)",
+					"value": 0
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "When prompted by your primary controller, click the button three times in one second",
+		"exclusion": "When prompted by your primary controller, click the button three times in one second",
+		"reset": "Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4463/IQSmartDimmerManual_v2.pdf"
+	}
+}