@zwave-js/config 10.0.0-beta.5 → 10.0.0-beta.8

package/config/devices/0x0271/templates/steinel_template.json

@@ -0,0 +1,237 @@
+{
+	"motion_light_duration": {
+		"label": "Light Duration After Motion",
+		"valueSize": 2,
+		"unit": "seconds",
+		"minValue": 5,
+		"maxValue": 900,
+		"defaultValue": 180
+	},
+	"light_threshold": {
+		"label": "Light Threshold",
+		"description": "Allowable range: 0, 2-2000. Moving the potentiometer overwrites the current setting.",
+		"valueSize": 2,
+		"unit": "lux",
+		"minValue": 0,
+		"maxValue": 2000,
+		"defaultValue": 2000,
+		"options": [
+			{
+				"label": "Execute learn sequence",
+				"value": 0
+			},
+			{
+				"label": "Disable threshold (always night)",
+				"value": 2000
+			}
+		]
+	},
+	"night_dim_mode": {
+		"label": "Night Dim Mode Duration",
+		"description": "Allowable range: 0-60, 255. External control overrides this setting.",
+		"valueSize": 1,
+		"unit": "minutes",
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 0,
+		"unsigned": true,
+		"options": [
+			{
+				"label": "Disable, light off completely",
+				"value": 0
+			},
+			{
+				"label": "Whole night",
+				"value": 255
+			}
+		]
+	},
+	"motion_sensor_range": {
+		"label": "Motion Sensor Range",
+		"description": "Moving the potentiometer overwrites the current setting.",
+		"unit": "cm",
+		"valueSize": 2,
+		"minValue": 100,
+		"maxValue": 500,
+		"defaultValue": 500
+	},
+	"motion_sensor_sensitivity": {
+		"label": "Motion Sensor Sensitivity",
+		"description": "Moving the potentiometer overwrites the current setting.",
+		"valueSize": 1,
+		"unit": "%",
+		"minValue": 2,
+		"maxValue": 100,
+		"defaultValue": 100
+	},
+	"brightness_measuring_interval": {
+		"label": "Brightness Measuring Interval",
+		"description": "Lamp switches off briefly and measures the ambient light. Allowable range: 5-120.",
+		"valueSize": 1,
+		"unit": "minutes",
+		"minValue": 0,
+		"maxValue": 120,
+		"defaultValue": 0,
+		"options": [
+			{
+				"label": "Disable",
+				"value": 0
+			}
+		]
+	},
+	"external_light_sensor": {
+		"$import": "~/templates/master_template.json#base_enable_disable",
+		"label": "External Ambient Light Sensor",
+		"description": "Measurements from associated Z-Wave light sensors are preferred if not older than 30 minutes.",
+		"defaultValue": 1
+	},
+	"light_behavior": {
+		// Meant to be used with the bitmask 0x07
+		"label": "Light Behavior",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 4,
+		"defaultValue": 2,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Normal mode",
+				"value": 0
+			},
+			{
+				"label": "External control",
+				"value": 1
+			},
+			{
+				"label": "Normal mode + gateway check",
+				"value": 2
+			},
+			{
+				"label": "External control + gateway check",
+				"value": 3
+			},
+			{
+				"label": "Permanently on",
+				"value": 4
+			}
+		]
+	},
+	"off_command_duration": {
+		"label": "Z-Wave Off Command: Turn Off Duration",
+		"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 10,
+		"options": [
+			{
+				"label": "Turn off immediately, until motion detected",
+				"value": 0
+			},
+			{
+				"label": "Turn off immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
+				"value": 255
+			}
+		]
+	},
+	"on_command_duration": {
+		"label": "Z-Wave On Command: Turn On Duration",
+		"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 255,
+		"options": [
+			{
+				"label": "Turn on, wait for motion immediately",
+				"value": 0
+			},
+			{
+				"label": "Turn on immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
+				"value": 255
+			}
+		]
+	},
+	"motion_wait_limit": {
+		"label": "Z-Wave On / Off-On: Motion Wait Time Limit",
+		"description": "How long to wait for motion after the configured duration before returning to normal operation to prevent staying on forever: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 204,
+		"options": [
+			{
+				"label": "Do not wait for motion",
+				"value": 0
+			},
+			{
+				"label": "Wait for motion indefinitely",
+				"value": 255
+			}
+		]
+	},
+	"on_off_sequence_off_duration": {
+		"label": "Z-Wave On-Off Sequence: Turn Off Duration",
+		"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 204,
+		"options": [
+			{
+				"label": "Immediately, until motion detected",
+				"value": 0
+			},
+			{
+				"label": "Ignore sequence, treat like off command",
+				"value": 255
+			}
+		]
+	},
+	"off_on_sequence_on_duration": {
+		"label": "Z-Wave Off-On Sequence: Turn On Duration",
+		"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 204,
+		"options": [
+			{
+				"label": "Turn on, wait for motion immediately",
+				"value": 0
+			},
+			{
+				"label": "Ignore sequence, treat like on command",
+				"value": 255
+			}
+		]
+	},
+	"sequence_timing": {
+		"label": "Sequence Timing",
+		"description": "Maximum delay between on-off or off-on commands to treat as a sequence",
+		"valueSize": 1,
+		"unit": "0.1 s",
+		"minValue": 10,
+		"maxValue": 50,
+		"defaultValue": 10
+	},
+	"command_motion_disable_timeout": {
+		"label": "Motion Sensor Disable Timeout",
+		"description": "How long to disable internal motion sensor after Basic Set command to motion endpoint: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 0,
+		"options": [
+			{
+				"label": "Ignore command, sensor permanently enabled",
+				"value": 0
+			},
+			{
+				"label": "Ignore command, sensor permanently disabled",
+				"value": 255
+			}
+		]
+	}
+}

package/config/devices/0x0271/xled_home_2.json

@@ -16,250 +16,55 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Light Duration After Motion",
-			"valueSize": 2,
-			"unit": "seconds",
-			"minValue": 5,
-			"maxValue": 900,
-			"defaultValue": 180
+			"$import": "templates/steinel_template.json#motion_light_duration"
 		},
 		{
 			"#": "2",
-			"label": "Light Threshold",
-			"description": "Allowable Range: 2-2000. Moving the potentiometer overwrites the current setting.",
-			"valueSize": 2,
-			"unit": "lux",
-			"minValue": 0,
-			"maxValue": 2000,
-			"defaultValue": 2000,
-			"options": [
-				{
-					"label": "Execute learn sequence",
-					"value": 0
-				}
-			]
+			"$import": "templates/steinel_template.json#light_threshold"
 		},
 		{
 			"#": "5",
-			"label": "Motion Sensor Sensitivity",
-			"description": "Moving the potentiometer overwrites the current setting.",
-			"valueSize": 1,
-			"unit": "%",
-			"minValue": 2,
-			"maxValue": 100,
-			"defaultValue": 100
+			"$import": "templates/steinel_template.json#motion_sensor_sensitivity"
 		},
 		{
 			"#": "6",
-			"label": "Brightness Measuring Interval",
-			"description": "Lamp switches off shortly and measures the ambient light.",
-			"valueSize": 1,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 120,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				}
-			]
+			"$import": "templates/steinel_template.json#brightness_measuring_interval"
 		},
 		{
 			"#": "8",
-			"label": "External Ambient Light Sensor",
-			"description": "Measurements from associated Z-Wave light sensors are preferred if not older than 30 minutes.",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "templates/steinel_template.json#external_light_sensor"
 		},
 		{
-			"#": "9[0x01]",
-			"label": "External Control",
-			"description": "When enabled, the lamp is controlled externally via Z-Wave and internal sensors are not used.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "9[0x02]",
-			"label": "Gateway Check",
-			"description": "External Control disabled: Lamp signalizes failure to reach the gateway. External Control enabled: Lamp falls back to normal mode after gateway could not be reached repeatedly.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "9[0x04]",
-			"label": "Permanently On",
-			"description": "When enabled, overrides the External Control and Gateway Check parameters",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"#": "9[0x07]",
+			"$import": "templates/steinel_template.json#light_behavior"
 		},
 		{
 			"#": "10",
-			"label": "Z-Wave Off Command: Turn Off Duration",
-			"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 10,
-			"options": [
-				{
-					"label": "Turn off immediately, until motion detected",
-					"value": 0
-				},
-				{
-					"label": "Turn off immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#off_command_duration"
 		},
 		{
 			"#": "11",
-			"label": "Z-Wave On Command: Turn On Duration",
-			"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 255,
-			"options": [
-				{
-					"label": "Turn on, wait for motion immediately",
-					"value": 0
-				},
-				{
-					"label": "Turn on immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#on_command_duration"
 		},
 		{
 			"#": "12",
-			"label": "Z-Wave On / Off-On: Motion Wait Time Limit",
-			"description": "How long to wait for motion after the configured duration before returning to normal operation to prevent staying on forever: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 204,
-			"options": [
-				{
-					"label": "Do not wait for motion",
-					"value": 0
-				},
-				{
-					"label": "Wait for motion indefinitely",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#motion_wait_limit"
 		},
 		{
 			"#": "13",
-			"label": "Z-Wave On-Off Sequence: Turn Off Duration",
-			"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 204,
-			"options": [
-				{
-					"label": "Immediately, until motion detected",
-					"value": 0
-				},
-				{
-					"label": "Ignore sequence, treat like off command",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#on_off_sequence_off_duration"
 		},
 		{
 			"#": "14",
-			"label": "Z-Wave Off-On Sequence: Turn On Duration",
-			"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 204,
-			"options": [
-				{
-					"label": "Turn on, wait for motion immediately",
-					"value": 0
-				},
-				{
-					"label": "Ignore sequence, treat like on command",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#off_on_sequence_on_duration"
 		},
 		{
 			"#": "15",
-			"label": "Sequence Timing",
-			"description": "Maximum delay between on-off or off-on commands to treat as a sequence",
-			"valueSize": 1,
-			"unit": "0.1 s",
-			"minValue": 10,
-			"maxValue": 50,
-			"defaultValue": 10
+			"$import": "templates/steinel_template.json#sequence_timing"
 		},
 		{
 			"#": "16",
-			"label": "Motion Sensor Disable Timeout",
-			"description": "How long to disable internal motion sensor after Basic Set command to motion endpoint: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Ignore command, sensor permanently enabled",
-					"value": 0
-				},
-				{
-					"label": "Ignore command, sensor permanently disabled",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#command_motion_disable_timeout"
 		}
 	]
 }

package/config/devices/0x027a/zen05.json

@@ -0,0 +1,63 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZEN05",
+	"description": "Outdoor Smart Plug",
+	"devices": [
+		{
+			"productType": "0x7000",
+			"productId": "0xb001"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "LED Indicator Mode",
+			"valueSize": 1,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Always On",
+					"value": 0
+				},
+				{
+					"label": "Follow Outlet",
+					"value": 1
+				},
+				{
+					"label": "Always Off",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "2",
+			"$import": "templates/zooz_template.json#auto_off_timer_duration",
+			"label": "Auto Turn-Off Timer Duration"
+		},
+		{
+			"#": "4",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Auto Turn-On Timer"
+		},
+		{
+			"#": "6",
+			"$import": "~/templates/master_template.json#state_after_power_failure_prev_on_off"
+		},
+		{
+			"#": "7",
+			"$import": "templates/zooz_template.json#led_indicator_brightness"
+		},
+		{
+			"#": "8",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Manual Control",
+			"defaultValue": 1
+		}
+	]
+}

package/config/devices/0x027a/zen20.json

@@ -21,14 +21,14 @@
 		{
 			"#": "2",
 			"$import": "~/templates/master_template.json#base_0-65535",
-			"label": "Power Wattage Report Value Threshold",
+			"label": "Power (W) Report Threshold",
+			"unit": "W",
 			"defaultValue": 5
 		},
 		{
 			"#": "3",
-			"label": "Power Wattage Report Frequency",
-			"description": "The number entered as value corresponds to the number of seconds",
-			"unit": "Seconds",
+			"label": "Power (W) Report Interval",
+			"unit": "seconds",
 			"valueSize": 4,
 			"minValue": 5,
 			"maxValue": 2678400,
@@ -36,18 +36,36 @@
 		},
 		{
 			"#": "4",
-			"label": "Energy (kWh) Report Frequency",
-			"description": "Report interval of power consumption (W) to your controller (hub)",
-			"unit": "Seconds",
+			"label": "Energy (kWh) Report Interval",
+			"unit": "seconds",
 			"valueSize": 4,
 			"minValue": 5,
 			"maxValue": 2678400,
 			"defaultValue": 300
 		},
+		{
+			"#": "35",
+			"$if": "firmwareVersion >= 2.3",
+			"label": "Current (A) Report Interval",
+			"unit": "seconds",
+			"valueSize": 4,
+			"minValue": 5,
+			"maxValue": 2678400,
+			"defaultValue": 30
+		},
+		{
+			"#": "36",
+			"$if": "firmwareVersion >= 2.3",
+			"label": "Voltage (V) Report Interval",
+			"unit": "seconds",
+			"valueSize": 4,
+			"minValue": 5,
+			"maxValue": 2678400,
+			"defaultValue": 30
+		},
 		{
 			"#": "5",
 			"label": "Overload Protection",
-			"description": "Set the Watt level for overload protection to kick in",
 			"unit": "W",
 			"valueSize": 2,
 			"minValue": 0,
@@ -162,6 +180,55 @@
 			"#": "27",
 			"$import": "~/templates/master_template.json#led_indicator_three_options",
 			"defaultValue": 1
+		},
+		{
+			"#": "28",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring",
+			"defaultValue": 1
+		},
+		{
+			"#": "29",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring (Relay 1)",
+			"defaultValue": 1
+		},
+		{
+			"#": "30",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring (Relay 2)",
+			"defaultValue": 1
+		},
+		{
+			"#": "31",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring (Relay 3)",
+			"defaultValue": 1
+		},
+		{
+			"#": "32",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring (Relay 4)",
+			"defaultValue": 1
+		},
+		{
+			"#": "33",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring (Relay 5)",
+			"defaultValue": 1
+		},
+		{
+			"#": "34",
+			"$if": "firmwareVersion >= 2.2",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Power/Energy Monitoring (USB)",
+			"defaultValue": 1
 		}
 	],
 	"compat": {

package/config/devices/0x0312/{mp21zp.json → mp21zp_mp31zp.json}

@@ -1,7 +1,7 @@
 {
 	"manufacturer": "Minoston",
 	"manufacturerId": "0x0312",
-	"label": "MP21ZP",
+	"label": "MP21ZP / MP31ZP",
 	"description": "Mini Plug with Power Meter",
 	"devices": [
 		{

package/config/devices/0x041b/39446_zw3107.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Resideo",
 	"manufacturerId": "0x041b",
 	"label": "39446 / ZW3107",
-	"description": "Plug-in Dimmer (Dual Plug Simultaneous Control)",
+	"description": "Plug-in 2-Outlet Smart Dimmer, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5044",