@zipify/wysiwyg 1.2.0 → 1.2.1-2

package/node_modules_lambda/saxes/README.md

@@ -1,323 +0,0 @@
-# saxes
-
-A sax-style non-validating parser for XML.
-
-Saxes is a fork of [sax](https://github.com/isaacs/sax-js) 1.2.4. All mentions
-of sax in this project's documentation are references to sax 1.2.4.
-
-Designed with [node](http://nodejs.org/) in mind, but should work fine in the
-browser or other CommonJS implementations.
-
-Saxes does not support Node versions older than 10.
-
-## Notable Differences from Sax.
-
-* Saxes aims to be much stricter than sax with regards to XML
-  well-formedness. Sax, even in its so-called "strict mode", is not strict. It
-  silently accepts structures that are not well-formed XML. Projects that need
-  better compliance with well-formedness constraints cannot use sax as-is.
-
-  Consequently, saxes does not support HTML, or pseudo-XML, or bad XML. Saxes
-  will report well-formedness errors in all these cases but it won't try to
-  extract data from malformed documents like sax does.
-
-* Saxes is much much faster than sax, mostly because of a substantial redesign
-  of the internal parsing logic. The speed improvement is not merely due to
-  removing features that were supported by sax. That helped a bit, but saxes
-  adds some expensive checks in its aim for conformance with the XML
-  specification. Redesigning the parsing logic is what accounts for most of the
-  performance improvement.
-
-* Saxes does not aim to support antiquated platforms. We will not pollute the
-  source or the default build with support for antiquated platforms. If you want
-  support for IE 11, you are welcome to produce a PR that adds a *new build*
-  transpiled to ES5.
-
-* Saxes handles errors differently from sax: it provides a default onerror
-  handler which throws. You can replace it with your own handler if you want. If
-  your handler does nothing, there is no `resume` method to call.
-
-* There's no `Stream` API. A revamped API may be introduced later. (It is still
-  a "streaming parser" in the general sense that you write a character stream to
-  it.)
-
-* Saxes does not have facilities for limiting the size the data chunks passed to
-  event handlers. See the FAQ entry for more details.
-
-## Conformance
-
-Saxes supports:
-
-* [XML 1.0 fifth edition](https://www.w3.org/TR/2008/REC-xml-20081126/)
-* [XML 1.1 second edition](https://www.w3.org/TR/2006/REC-xml11-20060816/)
-* [Namespaces in XML 1.0 (Third Edition)](https://www.w3.org/TR/2009/REC-xml-names-20091208/).
-* [Namespaces in XML 1.1 (Second Edition)](https://www.w3.org/TR/2006/REC-xml-names11-20060816/).
-
-## Limitations
-
-This is a non-validating parser so it only verifies whether the document is
-well-formed. We do aim to raise errors for all malformed constructs
-encountered. However, this parser does not thorougly parse the contents of
-DTDs. So most malformedness errors caused by errors **in DTDs** cannot be
-reported.
-
-## Regarding `<!DOCTYPE` and `<!ENTITY`
-
-The parser will handle the basic XML entities in text nodes and attribute
-values: `&amp; &lt; &gt; &apos; &quot;`. It's possible to define additional
-entities in XML by putting them in the DTD. This parser doesn't do anything with
-that. If you want to listen to the `doctype` event, and then fetch the
-doctypes, and read the entities and add them to `parser.ENTITIES`, then be my
-guest.
-
-## Documentation
-
-The source code contains JSDOC comments. Use them. What follows is a brief
-summary of what is available. The final authority is the source code.
-
-**PAY CLOSE ATTENTION TO WHAT IS PUBLIC AND WHAT IS PRIVATE.**
-
-The move to TypeScript makes it so that everything is now formally private,
-protected, or public.
-
-If you use anything not public, that's at your own peril.
-
-If there's a mistake in the documentation, raise an issue. If you just assume,
-you may assume incorrectly.
-
-## Summary Usage Information
-
-### Example
-
-```javascript
-var saxes = require("./lib/saxes"),
-  parser = new saxes.SaxesParser();
-
-parser.on("error", function (e) {
-  // an error happened.
-});
-parser.on("text", function (t) {
-  // got some text.  t is the string of text.
-});
-parser.on("opentag", function (node) {
-  // opened a tag.  node has "name" and "attributes"
-});
-parser.on("end", function () {
-  // parser stream is done, and ready to have more stuff written to it.
-});
-
-parser.write('<xml>Hello, <who name="world">world</who>!</xml>').close();
-```
-
-### Constructor Arguments
-
-Settings supported:
-
-* `xmlns` - Boolean. If `true`, then namespaces are supported. Default
-  is `false`.
-
-* `position` - Boolean. If `false`, then don't track line/col/position. Unset is
-  treated as `true`. Default is unset. Currently, setting this to `false` only
-  results in a cosmetic change: the errors reported do not contain position
-  information. sax-js would literally turn off the position-computing logic if
-  this flag was set to false. The notion was that it would optimize
-  execution. In saxes at least it turns out that continually testing this flag
-  causes a cost that offsets the benefits of turning off this logic.
-
-* `fileName` - String. Set a file name for error reporting. This is useful only
-  when tracking positions. You may leave it unset.
-
-* `fragment` - Boolean. If `true`, parse the XML as an XML fragment. Default is
-  `false`.
-
-* `additionalNamespaces` - A plain object whose key, value pairs define
-   namespaces known before parsing the XML file. It is not legal to pass
-   bindings for the namespaces `"xml"` or `"xmlns"`.
-
-* `defaultXMLVersion` - The default version of the XML specification to use if
-  the document contains no XML declaration. If the document does contain an XML
-  declaration, then this setting is ignored. Must be `"1.0"` or `"1.1"`. The
-  default is `"1.0"`.
-
-* `forceXMLVersion` - Boolean. A flag indicating whether to force the XML
-  version used for parsing to the value of ``defaultXMLVersion``. When this flag
-  is ``true``, ``defaultXMLVersion`` must be specified. If unspecified, the
-  default value of this flag is ``false``.
-
-  Example: suppose you are parsing a document that has an XML declaration
-  specifying XML version 1.1.
-
-  If you set ``defaultXMLVersion`` to ``"1.0"`` without setting
-  ``forceXMLVersion`` then the XML declaration will override the value of
-  ``defaultXMLVersion`` and the document will be parsed according to XML 1.1.
-
-  If you set ``defaultXMLVersion`` to ``"1.0"`` and set ``forceXMLVersion`` to
-  ``true``, then the XML declaration will be ignored and the document will be
-  parsed according to XML 1.0.
-
-### Methods
-
-`write` - Write bytes onto the stream. You don't have to pass the whole document
-in one `write` call. You can read your source chunk by chunk and call `write`
-with each chunk.
-
-`close` - Close the stream. Once closed, no more data may be written until it is
-done processing the buffer, which is signaled by the `end` event.
-
-### Properties
-
-The parser has the following properties:
-
-`line`, `column`, `columnIndex`, `position` - Indications of the position in the
-XML document where the parser currently is looking. The `columnIndex` property
-counts columns as if indexing into a JavaScript string, whereas the `column`
-property counts Unicode characters.
-
-`closed` - Boolean indicating whether or not the parser can be written to.  If
-it's `true`, then wait for the `ready` event to write again.
-
-`opt` - Any options passed into the constructor.
-
-`xmlDecl` - The XML declaration for this document. It contains the fields
-`version`, `encoding` and `standalone`. They are all `undefined` before
-encountering the XML declaration. If they are undefined after the XML
-declaration, the corresponding value was not set by the declaration. There is no
-event associated with the XML declaration. In a well-formed document, the XML
-declaration may be preceded only by an optional BOM. So by the time any event
-generated by the parser happens, the declaration has been processed if present
-at all. Otherwise, you have a malformed document, and as stated above, you
-cannot rely on the parser data!
-
-### Error Handling
-
-The parser continues to parse even upon encountering errors, and does its best
-to continue reporting errors. You should heed all errors reported. After an
-error, however, saxes may interpret your document incorrectly. For instance
-``<foo a=bc="d"/>`` is invalid XML. Did you mean to have ``<foo a="bc=d"/>`` or
-``<foo a="b" c="d"/>`` or some other variation?  For the sake of continuing to
-provide errors, saxes will continue parsing the document, but the structure it
-reports may be incorrect. It is only after the errors are fixed in the document
-that saxes can provide a reliable interpretation of the document.
-
-That leaves you with two rules of thumb when using saxes:
-
-* Pay attention to the errors that saxes report. The default `onerror` handler
-  throws, so by default, you cannot miss errors.
-
-* **ONCE AN ERROR HAS BEEN ENCOUNTERED, STOP RELYING ON THE EVENT HANDLERS OTHER
-  THAN `onerror`.** As explained above, when saxes runs into a well-formedness
-  problem, it makes a guess in order to continue reporting more errors. The guess
-  may be wrong.
-
-### Events
-
-To listen to an event, override `on<eventname>`. The list of supported events
-are also in the exported `EVENTS` array.
-
-See the JSDOC comments in the source code for a description of each supported
-event.
-
-### Parsing XML Fragments
-
-The XML specification does not define any method by which to parse XML
-fragments. However, there are usage scenarios in which it is desirable to parse
-fragments. In order to allow this, saxes provides three initialization options.
-
-If you pass the option `fragment: true` to the parser constructor, the parser
-will expect an XML fragment. It essentially starts with a parsing state
-equivalent to the one it would be in if `parser.write("<foo">)` had been called
-right after initialization. In other words, it expects content which is
-acceptable inside an element. This also turns off well-formedness checks that
-are inappropriate when parsing a fragment.
-
-The option `additionalNamespaces` allows you to define additional prefix-to-URI
-bindings known before parsing starts. You would use this over `resolvePrefix` if
-you have at the ready a series of namespaces bindings to use.
-
-The option `resolvePrefix` allows you to pass a function which saxes will use if
-it is unable to resolve a namespace prefix by itself. You would use this over
-`additionalNamespaces` in a context where getting a complete list of defined
-namespaces is onerous.
-
-Note that you can use `additionalNamespaces` and `resolvePrefix` together if you
-want. `additionalNamespaces` applies before `resolvePrefix`.
-
-The options `additionalNamespaces` and `resolvePrefix` are really meant to be
-used for parsing fragments. However, saxes won't prevent you from using them
-with `fragment: false`. Note that if you do this, your document may parse
-without errors and yet be malformed because the document can refer to namespaces
-which are not defined *in* the document.
-
-Of course, `additionalNamespaces` and `resolvePrefix` are used only if `xmlns`
-is `true`. If you are parsing a fragment that does not use namespaces, there's
-no point in setting these options.
-
-### Performance Tips
-
-* saxes works faster on files that use newlines (``\u000A``) as end of line
-  markers than files that use other end of line markers (like ``\r`` or
-  ``\r\n``). The XML specification requires that conformant applications behave
-  as if all characters that are to be treated as end of line characters are
-  converted to ``\u000A`` prior to parsing. The optimal code path for saxes is a
-  file in which all end of line characters are already ``\u000A``.
-
-* Don't split Unicode strings you feed to saxes across surrogates. When you
-  naively split a string in JavaScript, you run the risk of splitting a Unicode
-  character into two surrogates. e.g.  In the following example ``a`` and ``b``
-  each contain half of a single Unicode character: ``const a = "\u{1F4A9}"[0];
-  const b = "\u{1F4A9}"[1]`` If you feed such split surrogates to versions of
-  saxes prior to 4, you'd get errors. Saxes version 4 and over are able to
-  detect when a chunk of data ends with a surrogate and carry over the surrogate
-  to the next chunk. However this operation entails slicing and concatenating
-  strings. If you can feed your data in a way that does not split surrogates,
-  you should do it. (Obviously, feeding all the data at once with a single write
-  is fastest.)
-
-* Don't set event handlers you don't need. Saxes has always aimed to avoid doing
-  work that will just be tossed away but future improvements hope to do this
-  more aggressively. One way saxes knows whether or not some data is needed is
-  by checking whether a handler has been set for a specific event.
-
-## FAQ
-
-Q. Why has saxes dropped support for limiting the size of data chunks passed to
-event handlers?
-
-A. With sax you could set ``MAX_BUFFER_LENGTH`` to cause the parser to limit the
-size of data chunks passed to event handlers. So if you ran into a span of text
-above the limit, multiple ``text`` events with smaller data chunks were fired
-instead of a single event with a large chunk.
-
-However, that functionality had some problematic characteristics. It had an
-arbitrary default value. It was library-wide so all parsers created from a
-single instance of the ``sax`` library shared it. This could potentially cause
-conflicts among libraries running in the same VM but using sax for different
-purposes.
-
-These issues could have been easily fixed, but there were larger issues. The
-buffer limit arbitrarily applied to some events but not others. It would split
-``text``, ``cdata`` and ``script`` events. However, if a ``comment``,
-``doctype``, ``attribute`` or ``processing instruction`` were more than the
-limit, the parser would generate an error and you were left picking up the
-pieces.
-
-It was not intuitive to use. You'd think setting the limit to 1K would prevent
-chunks bigger than 1K to be passed to event handlers. But that was not the
-case. A comment in the source code told you that you might go over the limit if
-you passed large chunks to ``write``. So if you want a 1K limit, don't pass 64K
-chunks to ``write``. Fair enough. You know what limit you want so you can
-control the size of the data you pass to ``write``. So you limit the chunks to
-``write`` to 1K at a time. Even if you do this, your event handlers may get data
-chunks that are 2K in size. Suppose on the previous ``write`` the parser has
-just finished processing an open tag, so it is ready for text. Your ``write``
-passes 1K of text. You are not above the limit yet, so no event is generated
-yet. The next ``write`` passes another 1K of text. It so happens that sax checks
-buffer limits only once per ``write``, after the chunk of data has been
-processed. Now you've hit the limit and you get a ``text`` event with 2K of
-data. So even if you limit your ``write`` calls to the buffer limit you've set,
-you may still get events with chunks at twice the buffer size limit you've
-specified.
-
-We may consider reinstating an equivalent functionality, provided that it
-addresses the issues above and does not cause a huge performance drop for
-use-case scenarios that don't need it.

package/node_modules_lambda/saxes/package.json

@@ -1,70 +0,0 @@
-{
-  "name": "saxes",
-  "description": "An evented streaming XML parser in JavaScript",
-  "author": "Louis-Dominique Dubeau <ldd@lddubeau.com>",
-  "version": "5.0.1",
-  "main": "saxes.js",
-  "types": "saxes.d.ts",
-  "license": "ISC",
-  "engines": {
-    "node": ">=10"
-  },
-  "scripts": {
-    "tsc": "tsc",
-    "copy": "cp -p README.md build/dist && sed -e'/\"private\": true/d' package.json > build/dist/package.json",
-    "build": "npm run tsc && npm run copy",
-    "test": "npm run build && mocha --delay",
-    "lint": "eslint --ignore-path .gitignore '**/*.ts' '**/*.js'",
-    "lint-fix": "npm run lint -- --fix",
-    "posttest": "npm run lint",
-    "typedoc": "typedoc --tsconfig tsconfig.json --name saxes --out build/docs/ --listInvalidSymbolLinks --excludePrivate --excludeNotExported",
-    "build-docs": "npm run typedoc",
-    "gh-pages": "npm run build-docs && mkdir -p build && (cd build; rm -rf gh-pages; git clone .. --branch gh-pages gh-pages) && mkdir -p build/gh-pages/latest && find build/gh-pages/latest -type f -delete && cp -rp build/docs/* build/gh-pages/latest && find build/gh-pages -type d -empty -delete",
-    "self:publish": "cd build/dist && npm_config_tag=`simple-dist-tag` npm publish",
-    "version": "conventional-changelog -p angular -i CHANGELOG.md -s && git add CHANGELOG.md",
-    "postversion": "npm run test && npm run self:publish",
-    "postpublish": "git push origin --follow-tags"
-  },
-  "repository": "https://github.com/lddubeau/saxes.git",
-  "devDependencies": {
-    "@commitlint/cli": "^8.3.5",
-    "@commitlint/config-angular": "^8.3.4",
-    "@types/chai": "^4.2.11",
-    "@types/mocha": "^7.0.2",
-    "@typescript-eslint/eslint-plugin": "^2.27.0",
-    "@typescript-eslint/eslint-plugin-tslint": "^2.27.0",
-    "@typescript-eslint/parser": "^2.27.0",
-    "@xml-conformance-suite/js": "^2.0.0",
-    "@xml-conformance-suite/mocha": "^2.0.0",
-    "@xml-conformance-suite/test-data": "^2.0.0",
-    "chai": "^4.2.0",
-    "conventional-changelog-cli": "^2.0.31",
-    "eslint": "^6.8.0",
-    "eslint-config-lddubeau-base": "^5.2.0",
-    "eslint-config-lddubeau-ts": "^1.1.7",
-    "eslint-import-resolver-typescript": "^2.0.0",
-    "eslint-plugin-import": "^2.20.2",
-    "eslint-plugin-jsx-a11y": "^6.2.3",
-    "eslint-plugin-prefer-arrow": "^1.2.0",
-    "eslint-plugin-react": "^7.19.0",
-    "eslint-plugin-simple-import-sort": "^5.0.2",
-    "husky": "^4.2.5",
-    "mocha": "^7.1.1",
-    "renovate-config-lddubeau": "^1.0.0",
-    "simple-dist-tag": "^1.0.2",
-    "ts-node": "^8.8.2",
-    "tsd": "^0.11.0",
-    "tslint": "^6.1.1",
-    "tslint-microsoft-contrib": "^6.2.0",
-    "typedoc": "^0.17.4",
-    "typescript": "^3.8.3"
-  },
-  "dependencies": {
-    "xmlchars": "^2.2.0"
-  },
-  "husky": {
-    "hooks": {
-      "commit-msg": "commitlint -E HUSKY_GIT_PARAMS"
-    }
-  }
-}