@zip.js/zip.js 2.6.25 → 2.6.28

package/lib/core/streams/codecs/deflate.js

@@ -37,2031 +37,2027 @@
 
 // Global
 
-const ZipDeflate = (() => {
-
-	const MAX_BITS = 15;
-	const D_CODES = 30;
-	const BL_CODES = 19;
-
-	const LENGTH_CODES = 29;
-	const LITERALS = 256;
-	const L_CODES = (LITERALS + 1 + LENGTH_CODES);
-	const HEAP_SIZE = (2 * L_CODES + 1);
-
-	const END_BLOCK = 256;
-
-	// Bit length codes must not exceed MAX_BL_BITS bits
-	const MAX_BL_BITS = 7;
-
-	// repeat previous bit length 3-6 times (2 bits of repeat count)
-	const REP_3_6 = 16;
-
-	// repeat a zero length 3-10 times (3 bits of repeat count)
-	const REPZ_3_10 = 17;
-
-	// repeat a zero length 11-138 times (7 bits of repeat count)
-	const REPZ_11_138 = 18;
-
-	// The lengths of the bit length codes are sent in order of decreasing
-	// probability, to avoid transmitting the lengths for unused bit
-	// length codes.
-
-	const Buf_size = 8 * 2;
-
-	// JZlib version : "1.0.2"
-	const Z_DEFAULT_COMPRESSION = -1;
-
-	// compression strategy
-	const Z_FILTERED = 1;
-	const Z_HUFFMAN_ONLY = 2;
-	const Z_DEFAULT_STRATEGY = 0;
-
-	const Z_NO_FLUSH = 0;
-	const Z_PARTIAL_FLUSH = 1;
-	const Z_FULL_FLUSH = 3;
-	const Z_FINISH = 4;
-
-	const Z_OK = 0;
-	const Z_STREAM_END = 1;
-	const Z_NEED_DICT = 2;
-	const Z_STREAM_ERROR = -2;
-	const Z_DATA_ERROR = -3;
-	const Z_BUF_ERROR = -5;
-
-	// Tree
-
-	function extractArray(array) {
-		return flatArray(array.map(([length, value]) => (new Array(length)).fill(value, 0, length)));
-	}
-
-	function flatArray(array) {
-		return array.reduce((a, b) => a.concat(Array.isArray(b) ? flatArray(b) : b), []);
-	}
-
-	// see definition of array dist_code below
-	const _dist_code = [0, 1, 2, 3].concat(...extractArray([
-		[2, 4], [2, 5], [4, 6], [4, 7], [8, 8], [8, 9], [16, 10], [16, 11], [32, 12], [32, 13], [64, 14], [64, 15], [2, 0], [1, 16],
-		[1, 17], [2, 18], [2, 19], [4, 20], [4, 21], [8, 22], [8, 23], [16, 24], [16, 25], [32, 26], [32, 27], [64, 28], [64, 29]
-	]));
-
-	function Tree() {
-		const that = this;
-
-		// dyn_tree; // the dynamic tree
-		// max_code; // largest code with non zero frequency
-		// stat_desc; // the corresponding static tree
-
-		// Compute the optimal bit lengths for a tree and update the total bit
-		// length
-		// for the current block.
-		// IN assertion: the fields freq and dad are set, heap[heap_max] and
-		// above are the tree nodes sorted by increasing frequency.
-		// OUT assertions: the field len is set to the optimal bit length, the
-		// array bl_count contains the frequencies for each bit length.
-		// The length opt_len is updated; static_len is also updated if stree is
-		// not null.
-		function gen_bitlen(s) {
-			const tree = that.dyn_tree;
-			const stree = that.stat_desc.static_tree;
-			const extra = that.stat_desc.extra_bits;
-			const base = that.stat_desc.extra_base;
-			const max_length = that.stat_desc.max_length;
-			let h; // heap index
-			let n, m; // iterate over the tree elements
-			let bits; // bit length
-			let xbits; // extra bits
-			let f; // frequency
-			let overflow = 0; // number of elements with bit length too large
-
-			for (bits = 0; bits <= MAX_BITS; bits++)
-				s.bl_count[bits] = 0;
-
-			// In a first pass, compute the optimal bit lengths (which may
-			// overflow in the case of the bit length tree).
-			tree[s.heap[s.heap_max] * 2 + 1] = 0; // root of the heap
-
-			for (h = s.heap_max + 1; h < HEAP_SIZE; h++) {
-				n = s.heap[h];
-				bits = tree[tree[n * 2 + 1] * 2 + 1] + 1;
-				if (bits > max_length) {
-					bits = max_length;
-					overflow++;
-				}
-				tree[n * 2 + 1] = bits;
-				// We overwrite tree[n*2+1] which is no longer needed
-
-				if (n > that.max_code)
-					continue; // not a leaf node
-
-				s.bl_count[bits]++;
-				xbits = 0;
-				if (n >= base)
-					xbits = extra[n - base];
-				f = tree[n * 2];
-				s.opt_len += f * (bits + xbits);
-				if (stree)
-					s.static_len += f * (stree[n * 2 + 1] + xbits);
+const MAX_BITS = 15;
+const D_CODES = 30;
+const BL_CODES = 19;
+
+const LENGTH_CODES = 29;
+const LITERALS = 256;
+const L_CODES = (LITERALS + 1 + LENGTH_CODES);
+const HEAP_SIZE = (2 * L_CODES + 1);
+
+const END_BLOCK = 256;
+
+// Bit length codes must not exceed MAX_BL_BITS bits
+const MAX_BL_BITS = 7;
+
+// repeat previous bit length 3-6 times (2 bits of repeat count)
+const REP_3_6 = 16;
+
+// repeat a zero length 3-10 times (3 bits of repeat count)
+const REPZ_3_10 = 17;
+
+// repeat a zero length 11-138 times (7 bits of repeat count)
+const REPZ_11_138 = 18;
+
+// The lengths of the bit length codes are sent in order of decreasing
+// probability, to avoid transmitting the lengths for unused bit
+// length codes.
+
+const Buf_size = 8 * 2;
+
+// JZlib version : "1.0.2"
+const Z_DEFAULT_COMPRESSION = -1;
+
+// compression strategy
+const Z_FILTERED = 1;
+const Z_HUFFMAN_ONLY = 2;
+const Z_DEFAULT_STRATEGY = 0;
+
+const Z_NO_FLUSH = 0;
+const Z_PARTIAL_FLUSH = 1;
+const Z_FULL_FLUSH = 3;
+const Z_FINISH = 4;
+
+const Z_OK = 0;
+const Z_STREAM_END = 1;
+const Z_NEED_DICT = 2;
+const Z_STREAM_ERROR = -2;
+const Z_DATA_ERROR = -3;
+const Z_BUF_ERROR = -5;
+
+// Tree
+
+function extractArray(array) {
+	return flatArray(array.map(([length, value]) => (new Array(length)).fill(value, 0, length)));
+}
+
+function flatArray(array) {
+	return array.reduce((a, b) => a.concat(Array.isArray(b) ? flatArray(b) : b), []);
+}
+
+// see definition of array dist_code below
+const _dist_code = [0, 1, 2, 3].concat(...extractArray([
+	[2, 4], [2, 5], [4, 6], [4, 7], [8, 8], [8, 9], [16, 10], [16, 11], [32, 12], [32, 13], [64, 14], [64, 15], [2, 0], [1, 16],
+	[1, 17], [2, 18], [2, 19], [4, 20], [4, 21], [8, 22], [8, 23], [16, 24], [16, 25], [32, 26], [32, 27], [64, 28], [64, 29]
+]));
+
+function Tree() {
+	const that = this;
+
+	// dyn_tree; // the dynamic tree
+	// max_code; // largest code with non zero frequency
+	// stat_desc; // the corresponding static tree
+
+	// Compute the optimal bit lengths for a tree and update the total bit
+	// length
+	// for the current block.
+	// IN assertion: the fields freq and dad are set, heap[heap_max] and
+	// above are the tree nodes sorted by increasing frequency.
+	// OUT assertions: the field len is set to the optimal bit length, the
+	// array bl_count contains the frequencies for each bit length.
+	// The length opt_len is updated; static_len is also updated if stree is
+	// not null.
+	function gen_bitlen(s) {
+		const tree = that.dyn_tree;
+		const stree = that.stat_desc.static_tree;
+		const extra = that.stat_desc.extra_bits;
+		const base = that.stat_desc.extra_base;
+		const max_length = that.stat_desc.max_length;
+		let h; // heap index
+		let n, m; // iterate over the tree elements
+		let bits; // bit length
+		let xbits; // extra bits
+		let f; // frequency
+		let overflow = 0; // number of elements with bit length too large
+
+		for (bits = 0; bits <= MAX_BITS; bits++)
+			s.bl_count[bits] = 0;
+
+		// In a first pass, compute the optimal bit lengths (which may
+		// overflow in the case of the bit length tree).
+		tree[s.heap[s.heap_max] * 2 + 1] = 0; // root of the heap
+
+		for (h = s.heap_max + 1; h < HEAP_SIZE; h++) {
+			n = s.heap[h];
+			bits = tree[tree[n * 2 + 1] * 2 + 1] + 1;
+			if (bits > max_length) {
+				bits = max_length;
+				overflow++;
 			}
-			if (overflow === 0)
-				return;
-
-			// This happens for example on obj2 and pic of the Calgary corpus
-			// Find the first bit length which could increase:
-			do {
-				bits = max_length - 1;
-				while (s.bl_count[bits] === 0)
-					bits--;
-				s.bl_count[bits]--; // move one leaf down the tree
-				s.bl_count[bits + 1] += 2; // move one overflow item as its brother
-				s.bl_count[max_length]--;
-				// The brother of the overflow item also moves one step up,
-				// but this does not affect bl_count[max_length]
-				overflow -= 2;
-			} while (overflow > 0);
-
-			for (bits = max_length; bits !== 0; bits--) {
-				n = s.bl_count[bits];
-				while (n !== 0) {
-					m = s.heap[--h];
-					if (m > that.max_code)
-						continue;
-					if (tree[m * 2 + 1] != bits) {
-						s.opt_len += (bits - tree[m * 2 + 1]) * tree[m * 2];
-						tree[m * 2 + 1] = bits;
-					}
-					n--;
+			tree[n * 2 + 1] = bits;
+			// We overwrite tree[n*2+1] which is no longer needed
+
+			if (n > that.max_code)
+				continue; // not a leaf node
+
+			s.bl_count[bits]++;
+			xbits = 0;
+			if (n >= base)
+				xbits = extra[n - base];
+			f = tree[n * 2];
+			s.opt_len += f * (bits + xbits);
+			if (stree)
+				s.static_len += f * (stree[n * 2 + 1] + xbits);
+		}
+		if (overflow === 0)
+			return;
+
+		// This happens for example on obj2 and pic of the Calgary corpus
+		// Find the first bit length which could increase:
+		do {
+			bits = max_length - 1;
+			while (s.bl_count[bits] === 0)
+				bits--;
+			s.bl_count[bits]--; // move one leaf down the tree
+			s.bl_count[bits + 1] += 2; // move one overflow item as its brother
+			s.bl_count[max_length]--;
+			// The brother of the overflow item also moves one step up,
+			// but this does not affect bl_count[max_length]
+			overflow -= 2;
+		} while (overflow > 0);
+
+		for (bits = max_length; bits !== 0; bits--) {
+			n = s.bl_count[bits];
+			while (n !== 0) {
+				m = s.heap[--h];
+				if (m > that.max_code)
+					continue;
+				if (tree[m * 2 + 1] != bits) {
+					s.opt_len += (bits - tree[m * 2 + 1]) * tree[m * 2];
+					tree[m * 2 + 1] = bits;
 				}
+				n--;
 			}
 		}
+	}
 
-		// Reverse the first len bits of a code, using straightforward code (a
-		// faster
-		// method would use a table)
-		// IN assertion: 1 <= len <= 15
-		function bi_reverse(code, // the value to invert
-			len // its bit length
-		) {
-			let res = 0;
-			do {
-				res |= code & 1;
-				code >>>= 1;
-				res <<= 1;
-			} while (--len > 0);
-			return res >>> 1;
-		}
+	// Reverse the first len bits of a code, using straightforward code (a
+	// faster
+	// method would use a table)
+	// IN assertion: 1 <= len <= 15
+	function bi_reverse(code, // the value to invert
+		len // its bit length
+	) {
+		let res = 0;
+		do {
+			res |= code & 1;
+			code >>>= 1;
+			res <<= 1;
+		} while (--len > 0);
+		return res >>> 1;
+	}
 
-		// Generate the codes for a given tree and bit counts (which need not be
-		// optimal).
-		// IN assertion: the array bl_count contains the bit length statistics for
-		// the given tree and the field len is set for all tree elements.
-		// OUT assertion: the field code is set for all tree elements of non
-		// zero code length.
-		function gen_codes(tree, // the tree to decorate
-			max_code, // largest code with non zero frequency
-			bl_count // number of codes at each bit length
-		) {
-			const next_code = []; // next code value for each
-			// bit length
-			let code = 0; // running code value
-			let bits; // bit index
-			let n; // code index
-			let len;
-
-			// The distribution counts are first used to generate the code values
-			// without bit reversal.
-			for (bits = 1; bits <= MAX_BITS; bits++) {
-				next_code[bits] = code = ((code + bl_count[bits - 1]) << 1);
-			}
+	// Generate the codes for a given tree and bit counts (which need not be
+	// optimal).
+	// IN assertion: the array bl_count contains the bit length statistics for
+	// the given tree and the field len is set for all tree elements.
+	// OUT assertion: the field code is set for all tree elements of non
+	// zero code length.
+	function gen_codes(tree, // the tree to decorate
+		max_code, // largest code with non zero frequency
+		bl_count // number of codes at each bit length
+	) {
+		const next_code = []; // next code value for each
+		// bit length
+		let code = 0; // running code value
+		let bits; // bit index
+		let n; // code index
+		let len;
+
+		// The distribution counts are first used to generate the code values
+		// without bit reversal.
+		for (bits = 1; bits <= MAX_BITS; bits++) {
+			next_code[bits] = code = ((code + bl_count[bits - 1]) << 1);
+		}
 
-			// Check that the bit counts in bl_count are consistent. The last code
-			// must be all ones.
-			// Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-			// "inconsistent bit counts");
-			// Tracev((stderr,"gen_codes: max_code %d ", max_code));
+		// Check that the bit counts in bl_count are consistent. The last code
+		// must be all ones.
+		// Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
+		// "inconsistent bit counts");
+		// Tracev((stderr,"gen_codes: max_code %d ", max_code));
 
-			for (n = 0; n <= max_code; n++) {
-				len = tree[n * 2 + 1];
-				if (len === 0)
-					continue;
-				// Now reverse the bits
-				tree[n * 2] = bi_reverse(next_code[len]++, len);
-			}
+		for (n = 0; n <= max_code; n++) {
+			len = tree[n * 2 + 1];
+			if (len === 0)
+				continue;
+			// Now reverse the bits
+			tree[n * 2] = bi_reverse(next_code[len]++, len);
 		}
+	}
 
-		// Construct one Huffman tree and assigns the code bit strings and lengths.
-		// Update the total bit length for the current block.
-		// IN assertion: the field freq is set for all tree elements.
-		// OUT assertions: the fields len and code are set to the optimal bit length
-		// and corresponding code. The length opt_len is updated; static_len is
-		// also updated if stree is not null. The field max_code is set.
-		that.build_tree = function (s) {
-			const tree = that.dyn_tree;
-			const stree = that.stat_desc.static_tree;
-			const elems = that.stat_desc.elems;
-			let n, m; // iterate over heap elements
-			let max_code = -1; // largest code with non zero frequency
-			let node; // new node being created
-
-			// Construct the initial heap, with least frequent element in
-			// heap[1]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-			// heap[0] is not used.
-			s.heap_len = 0;
-			s.heap_max = HEAP_SIZE;
-
-			for (n = 0; n < elems; n++) {
-				if (tree[n * 2] !== 0) {
-					s.heap[++s.heap_len] = max_code = n;
-					s.depth[n] = 0;
-				} else {
-					tree[n * 2 + 1] = 0;
-				}
-			}
-
-			// The pkzip format requires that at least one distance code exists,
-			// and that at least one bit should be sent even if there is only one
-			// possible code. So to avoid special checks later on we force at least
-			// two codes of non zero frequency.
-			while (s.heap_len < 2) {
-				node = s.heap[++s.heap_len] = max_code < 2 ? ++max_code : 0;
-				tree[node * 2] = 1;
-				s.depth[node] = 0;
-				s.opt_len--;
-				if (stree)
-					s.static_len -= stree[node * 2 + 1];
-				// node is 0 or 1 so it does not have extra bits
+	// Construct one Huffman tree and assigns the code bit strings and lengths.
+	// Update the total bit length for the current block.
+	// IN assertion: the field freq is set for all tree elements.
+	// OUT assertions: the fields len and code are set to the optimal bit length
+	// and corresponding code. The length opt_len is updated; static_len is
+	// also updated if stree is not null. The field max_code is set.
+	that.build_tree = function (s) {
+		const tree = that.dyn_tree;
+		const stree = that.stat_desc.static_tree;
+		const elems = that.stat_desc.elems;
+		let n, m; // iterate over heap elements
+		let max_code = -1; // largest code with non zero frequency
+		let node; // new node being created
+
+		// Construct the initial heap, with least frequent element in
+		// heap[1]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
+		// heap[0] is not used.
+		s.heap_len = 0;
+		s.heap_max = HEAP_SIZE;
+
+		for (n = 0; n < elems; n++) {
+			if (tree[n * 2] !== 0) {
+				s.heap[++s.heap_len] = max_code = n;
+				s.depth[n] = 0;
+			} else {
+				tree[n * 2 + 1] = 0;
 			}
-			that.max_code = max_code;
-
-			// The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-			// establish sub-heaps of increasing lengths:
-
-			for (n = Math.floor(s.heap_len / 2); n >= 1; n--)
-				s.pqdownheap(tree, n);
-
-			// Construct the Huffman tree by repeatedly combining the least two
-			// frequent nodes.
-
-			node = elems; // next internal node of the tree
-			do {
-				// n = node of least frequency
-				n = s.heap[1];
-				s.heap[1] = s.heap[s.heap_len--];
-				s.pqdownheap(tree, 1);
-				m = s.heap[1]; // m = node of next least frequency
+		}
 
-				s.heap[--s.heap_max] = n; // keep the nodes sorted by frequency
-				s.heap[--s.heap_max] = m;
+		// The pkzip format requires that at least one distance code exists,
+		// and that at least one bit should be sent even if there is only one
+		// possible code. So to avoid special checks later on we force at least
+		// two codes of non zero frequency.
+		while (s.heap_len < 2) {
+			node = s.heap[++s.heap_len] = max_code < 2 ? ++max_code : 0;
+			tree[node * 2] = 1;
+			s.depth[node] = 0;
+			s.opt_len--;
+			if (stree)
+				s.static_len -= stree[node * 2 + 1];
+			// node is 0 or 1 so it does not have extra bits
+		}
+		that.max_code = max_code;
 
-				// Create a new node father of n and m
-				tree[node * 2] = (tree[n * 2] + tree[m * 2]);
-				s.depth[node] = Math.max(s.depth[n], s.depth[m]) + 1;
-				tree[n * 2 + 1] = tree[m * 2 + 1] = node;
+		// The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
+		// establish sub-heaps of increasing lengths:
 
-				// and insert the new node in the heap
-				s.heap[1] = node++;
-				s.pqdownheap(tree, 1);
-			} while (s.heap_len >= 2);
+		for (n = Math.floor(s.heap_len / 2); n >= 1; n--)
+			s.pqdownheap(tree, n);
 
-			s.heap[--s.heap_max] = s.heap[1];
+		// Construct the Huffman tree by repeatedly combining the least two
+		// frequent nodes.
 
-			// At this point, the fields freq and dad are set. We can now
-			// generate the bit lengths.
+		node = elems; // next internal node of the tree
+		do {
+			// n = node of least frequency
+			n = s.heap[1];
+			s.heap[1] = s.heap[s.heap_len--];
+			s.pqdownheap(tree, 1);
+			m = s.heap[1]; // m = node of next least frequency
 
-			gen_bitlen(s);
+			s.heap[--s.heap_max] = n; // keep the nodes sorted by frequency
+			s.heap[--s.heap_max] = m;
 
-			// The field len is now set, we can generate the bit codes
-			gen_codes(tree, that.max_code, s.bl_count);
-		};
+			// Create a new node father of n and m
+			tree[node * 2] = (tree[n * 2] + tree[m * 2]);
+			s.depth[node] = Math.max(s.depth[n], s.depth[m]) + 1;
+			tree[n * 2 + 1] = tree[m * 2 + 1] = node;
 
-	}
+			// and insert the new node in the heap
+			s.heap[1] = node++;
+			s.pqdownheap(tree, 1);
+		} while (s.heap_len >= 2);
 
-	Tree._length_code = [0, 1, 2, 3, 4, 5, 6, 7].concat(...extractArray([
-		[2, 8], [2, 9], [2, 10], [2, 11], [4, 12], [4, 13], [4, 14], [4, 15], [8, 16], [8, 17], [8, 18], [8, 19],
-		[16, 20], [16, 21], [16, 22], [16, 23], [32, 24], [32, 25], [32, 26], [31, 27], [1, 28]]));
+		s.heap[--s.heap_max] = s.heap[1];
 
-	Tree.base_length = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 0];
+		// At this point, the fields freq and dad are set. We can now
+		// generate the bit lengths.
 
-	Tree.base_dist = [0, 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384,
-		24576];
+		gen_bitlen(s);
 
-	// Mapping from a distance to a distance code. dist is the distance - 1 and
-	// must not have side effects. _dist_code[256] and _dist_code[257] are never
-	// used.
-	Tree.d_code = function (dist) {
-		return ((dist) < 256 ? _dist_code[dist] : _dist_code[256 + ((dist) >>> 7)]);
+		// The field len is now set, we can generate the bit codes
+		gen_codes(tree, that.max_code, s.bl_count);
 	};
 
-	// extra bits for each length code
-	Tree.extra_lbits = [0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0];
-
-	// extra bits for each distance code
-	Tree.extra_dbits = [0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13];
-
-	// extra bits for each bit length code
-	Tree.extra_blbits = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7];
-
-	Tree.bl_order = [16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15];
-
-	// StaticTree
+}
+
+Tree._length_code = [0, 1, 2, 3, 4, 5, 6, 7].concat(...extractArray([
+	[2, 8], [2, 9], [2, 10], [2, 11], [4, 12], [4, 13], [4, 14], [4, 15], [8, 16], [8, 17], [8, 18], [8, 19],
+	[16, 20], [16, 21], [16, 22], [16, 23], [32, 24], [32, 25], [32, 26], [31, 27], [1, 28]]));
+
+Tree.base_length = [0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 0];
+
+Tree.base_dist = [0, 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192, 256, 384, 512, 768, 1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384,
+	24576];
+
+// Mapping from a distance to a distance code. dist is the distance - 1 and
+// must not have side effects. _dist_code[256] and _dist_code[257] are never
+// used.
+Tree.d_code = function (dist) {
+	return ((dist) < 256 ? _dist_code[dist] : _dist_code[256 + ((dist) >>> 7)]);
+};
+
+// extra bits for each length code
+Tree.extra_lbits = [0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0];
+
+// extra bits for each distance code
+Tree.extra_dbits = [0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13];
+
+// extra bits for each bit length code
+Tree.extra_blbits = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7];
+
+Tree.bl_order = [16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15];
+
+// StaticTree
+
+function StaticTree(static_tree, extra_bits, extra_base, elems, max_length) {
+	const that = this;
+	that.static_tree = static_tree;
+	that.extra_bits = extra_bits;
+	that.extra_base = extra_base;
+	that.elems = elems;
+	that.max_length = max_length;
+}
+
+const static_ltree2_first_part = [12, 140, 76, 204, 44, 172, 108, 236, 28, 156, 92, 220, 60, 188, 124, 252, 2, 130, 66, 194, 34, 162, 98, 226, 18, 146, 82,
+	210, 50, 178, 114, 242, 10, 138, 74, 202, 42, 170, 106, 234, 26, 154, 90, 218, 58, 186, 122, 250, 6, 134, 70, 198, 38, 166, 102, 230, 22, 150, 86,
+	214, 54, 182, 118, 246, 14, 142, 78, 206, 46, 174, 110, 238, 30, 158, 94, 222, 62, 190, 126, 254, 1, 129, 65, 193, 33, 161, 97, 225, 17, 145, 81,
+	209, 49, 177, 113, 241, 9, 137, 73, 201, 41, 169, 105, 233, 25, 153, 89, 217, 57, 185, 121, 249, 5, 133, 69, 197, 37, 165, 101, 229, 21, 149, 85,
+	213, 53, 181, 117, 245, 13, 141, 77, 205, 45, 173, 109, 237, 29, 157, 93, 221, 61, 189, 125, 253, 19, 275, 147, 403, 83, 339, 211, 467, 51, 307,
+	179, 435, 115, 371, 243, 499, 11, 267, 139, 395, 75, 331, 203, 459, 43, 299, 171, 427, 107, 363, 235, 491, 27, 283, 155, 411, 91, 347, 219, 475,
+	59, 315, 187, 443, 123, 379, 251, 507, 7, 263, 135, 391, 71, 327, 199, 455, 39, 295, 167, 423, 103, 359, 231, 487, 23, 279, 151, 407, 87, 343, 215,
+	471, 55, 311, 183, 439, 119, 375, 247, 503, 15, 271, 143, 399, 79, 335, 207, 463, 47, 303, 175, 431, 111, 367, 239, 495, 31, 287, 159, 415, 95,
+	351, 223, 479, 63, 319, 191, 447, 127, 383, 255, 511, 0, 64, 32, 96, 16, 80, 48, 112, 8, 72, 40, 104, 24, 88, 56, 120, 4, 68, 36, 100, 20, 84, 52,
+	116, 3, 131, 67, 195, 35, 163, 99, 227];
+const static_ltree2_second_part = extractArray([[144, 8], [112, 9], [24, 7], [8, 8]]);
+StaticTree.static_ltree = flatArray(static_ltree2_first_part.map((value, index) => [value, static_ltree2_second_part[index]]));
+
+const static_dtree_first_part = [0, 16, 8, 24, 4, 20, 12, 28, 2, 18, 10, 26, 6, 22, 14, 30, 1, 17, 9, 25, 5, 21, 13, 29, 3, 19, 11, 27, 7, 23];
+const static_dtree_second_part = extractArray([[30, 5]]);
+StaticTree.static_dtree = flatArray(static_dtree_first_part.map((value, index) => [value, static_dtree_second_part[index]]));
+
+StaticTree.static_l_desc = new StaticTree(StaticTree.static_ltree, Tree.extra_lbits, LITERALS + 1, L_CODES, MAX_BITS);
+
+StaticTree.static_d_desc = new StaticTree(StaticTree.static_dtree, Tree.extra_dbits, 0, D_CODES, MAX_BITS);
+
+StaticTree.static_bl_desc = new StaticTree(null, Tree.extra_blbits, 0, BL_CODES, MAX_BL_BITS);
+
+// Deflate
+
+const MAX_MEM_LEVEL = 9;
+const DEF_MEM_LEVEL = 8;
+
+function Config(good_length, max_lazy, nice_length, max_chain, func) {
+	const that = this;
+	that.good_length = good_length;
+	that.max_lazy = max_lazy;
+	that.nice_length = nice_length;
+	that.max_chain = max_chain;
+	that.func = func;
+}
+
+const STORED = 0;
+const FAST = 1;
+const SLOW = 2;
+const config_table = [
+	new Config(0, 0, 0, 0, STORED),
+	new Config(4, 4, 8, 4, FAST),
+	new Config(4, 5, 16, 8, FAST),
+	new Config(4, 6, 32, 32, FAST),
+	new Config(4, 4, 16, 16, SLOW),
+	new Config(8, 16, 32, 32, SLOW),
+	new Config(8, 16, 128, 128, SLOW),
+	new Config(8, 32, 128, 256, SLOW),
+	new Config(32, 128, 258, 1024, SLOW),
+	new Config(32, 258, 258, 4096, SLOW)
+];
+
+const z_errmsg = ["need dictionary", // Z_NEED_DICT
+	// 2
+	"stream end", // Z_STREAM_END 1
+	"", // Z_OK 0
+	"", // Z_ERRNO (-1)
+	"stream error", // Z_STREAM_ERROR (-2)
+	"data error", // Z_DATA_ERROR (-3)
+	"", // Z_MEM_ERROR (-4)
+	"buffer error", // Z_BUF_ERROR (-5)
+	"",// Z_VERSION_ERROR (-6)
+	""];
+
+// block not completed, need more input or more output
+const NeedMore = 0;
+
+// block flush performed
+const BlockDone = 1;
+
+// finish started, need only more output at next deflate
+const FinishStarted = 2;
+
+// finish done, accept no more input or output
+const FinishDone = 3;
+
+// preset dictionary flag in zlib header
+const PRESET_DICT = 0x20;
+
+const INIT_STATE = 42;
+const BUSY_STATE = 113;
+const FINISH_STATE = 666;
+
+// The deflate compression method
+const Z_DEFLATED = 8;
+
+const STORED_BLOCK = 0;
+const STATIC_TREES = 1;
+const DYN_TREES = 2;
+
+const MIN_MATCH = 3;
+const MAX_MATCH = 258;
+const MIN_LOOKAHEAD = (MAX_MATCH + MIN_MATCH + 1);
+
+function smaller(tree, n, m, depth) {
+	const tn2 = tree[n * 2];
+	const tm2 = tree[m * 2];
+	return (tn2 < tm2 || (tn2 == tm2 && depth[n] <= depth[m]));
+}
+
+function Deflate() {
+
+	const that = this;
+	let strm; // pointer back to this zlib stream
+	let status; // as the name implies
+	// pending_buf; // output still pending
+	let pending_buf_size; // size of pending_buf
+	// pending_out; // next pending byte to output to the stream
+	// pending; // nb of bytes in the pending buffer
+
+	// dist_buf; // buffer for distances
+	// lc_buf; // buffer for literals or lengths
+	// To simplify the code, dist_buf and lc_buf have the same number of elements.
+	// To use different lengths, an extra flag array would be necessary.
+
+	let last_flush; // value of flush param for previous deflate call
+
+	let w_size; // LZ77 win size (32K by default)
+	let w_bits; // log2(w_size) (8..16)
+	let w_mask; // w_size - 1
+
+	let win;
+	// Sliding win. Input bytes are read into the second half of the win,
+	// and move to the first half later to keep a dictionary of at least wSize
+	// bytes. With this organization, matches are limited to a distance of
+	// wSize-MAX_MATCH bytes, but this ensures that IO is always
+	// performed with a length multiple of the block size. Also, it limits
+	// the win size to 64K, which is quite useful on MSDOS.
+	// To do: use the user input buffer as sliding win.
+
+	let window_size;
+	// Actual size of win: 2*wSize, except when the user input buffer
+	// is directly used as sliding win.
+
+	let prev;
+	// Link to older string with same hash index. To limit the size of this
+	// array to 64K, this link is maintained only for the last 32K strings.
+	// An index in this array is thus a win index modulo 32K.
+
+	let head; // Heads of the hash chains or NIL.
+
+	let ins_h; // hash index of string to be inserted
+	let hash_size; // number of elements in hash table
+	let hash_bits; // log2(hash_size)
+	let hash_mask; // hash_size-1
+
+	// Number of bits by which ins_h must be shifted at each input
+	// step. It must be such that after MIN_MATCH steps, the oldest
+	// byte no longer takes part in the hash key, that is:
+	// hash_shift * MIN_MATCH >= hash_bits
+	let hash_shift;
+
+	// Window position at the beginning of the current output block. Gets
+	// negative when the win is moved backwards.
+
+	let block_start;
+
+	let match_length; // length of best match
+	let prev_match; // previous match
+	let match_available; // set if previous match exists
+	let strstart; // start of string to insert
+	let match_start; // start of matching string
+	let lookahead; // number of valid bytes ahead in win
+
+	// Length of the best match at previous step. Matches not greater than this
+	// are discarded. This is used in the lazy match evaluation.
+	let prev_length;
+
+	// To speed up deflation, hash chains are never searched beyond this
+	// length. A higher limit improves compression ratio but degrades the speed.
+	let max_chain_length;
+
+	// Attempt to find a better match only when the current match is strictly
+	// smaller than this value. This mechanism is used only for compression
+	// levels >= 4.
+	let max_lazy_match;
+
+	// Insert new strings in the hash table only if the match length is not
+	// greater than this length. This saves time but degrades compression.
+	// max_insert_length is used only for compression levels <= 3.
+
+	let level; // compression level (1..9)
+	let strategy; // favor or force Huffman coding
+
+	// Use a faster search when the previous match is longer than this
+	let good_match;
+
+	// Stop searching when current match exceeds this
+	let nice_match;
+
+	let dyn_ltree; // literal and length tree
+	let dyn_dtree; // distance tree
+	let bl_tree; // Huffman tree for bit lengths
+
+	const l_desc = new Tree(); // desc for literal tree
+	const d_desc = new Tree(); // desc for distance tree
+	const bl_desc = new Tree(); // desc for bit length tree
+
+	// that.heap_len; // number of elements in the heap
+	// that.heap_max; // element of largest frequency
+	// The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
+	// The same heap array is used to build all trees.
+
+	// Depth of each subtree used as tie breaker for trees of equal frequency
+	that.depth = [];
+
+	// Size of match buffer for literals/lengths. There are 4 reasons for
+	// limiting lit_bufsize to 64K:
+	// - frequencies can be kept in 16 bit counters
+	// - if compression is not successful for the first block, all input
+	// data is still in the win so we can still emit a stored block even
+	// when input comes from standard input. (This can also be done for
+	// all blocks if lit_bufsize is not greater than 32K.)
+	// - if compression is not successful for a file smaller than 64K, we can
+	// even emit a stored file instead of a stored block (saving 5 bytes).
+	// This is applicable only for zip (not gzip or zlib).
+	// - creating new Huffman trees less frequently may not provide fast
+	// adaptation to changes in the input data statistics. (Take for
+	// example a binary file with poorly compressible code followed by
+	// a highly compressible string table.) Smaller buffer sizes give
+	// fast adaptation but have of course the overhead of transmitting
+	// trees more frequently.
+	// - I can't count above 4
+	let lit_bufsize;
+
+	let last_lit; // running index in dist_buf and lc_buf
+
+	// that.opt_len; // bit length of current block with optimal trees
+	// that.static_len; // bit length of current block with static trees
+	let matches; // number of string matches in current block
+	let last_eob_len; // bit length of EOB code for last block
+
+	// Output buffer. bits are inserted starting at the bottom (least
+	// significant bits).
+	let bi_buf;
+
+	// Number of valid bits in bi_buf. All bits above the last valid bit
+	// are always zero.
+	let bi_valid;
+
+	// number of codes at each bit length for an optimal tree
+	that.bl_count = [];
+
+	// heap used to build the Huffman trees
+	that.heap = [];
+
+	dyn_ltree = [];
+	dyn_dtree = [];
+	bl_tree = [];
+
+	function lm_init() {
+		window_size = 2 * w_size;
+
+		head[hash_size - 1] = 0;
+		for (let i = 0; i < hash_size - 1; i++) {
+			head[i] = 0;
+		}
 
-	function StaticTree(static_tree, extra_bits, extra_base, elems, max_length) {
-		const that = this;
-		that.static_tree = static_tree;
-		that.extra_bits = extra_bits;
-		that.extra_base = extra_base;
-		that.elems = elems;
-		that.max_length = max_length;
+		// Set the default configuration parameters:
+		max_lazy_match = config_table[level].max_lazy;
+		good_match = config_table[level].good_length;
+		nice_match = config_table[level].nice_length;
+		max_chain_length = config_table[level].max_chain;
+
+		strstart = 0;
+		block_start = 0;
+		lookahead = 0;
+		match_length = prev_length = MIN_MATCH - 1;
+		match_available = 0;
+		ins_h = 0;
 	}
 
-	const static_ltree2_first_part = [12, 140, 76, 204, 44, 172, 108, 236, 28, 156, 92, 220, 60, 188, 124, 252, 2, 130, 66, 194, 34, 162, 98, 226, 18, 146, 82,
-		210, 50, 178, 114, 242, 10, 138, 74, 202, 42, 170, 106, 234, 26, 154, 90, 218, 58, 186, 122, 250, 6, 134, 70, 198, 38, 166, 102, 230, 22, 150, 86,
-		214, 54, 182, 118, 246, 14, 142, 78, 206, 46, 174, 110, 238, 30, 158, 94, 222, 62, 190, 126, 254, 1, 129, 65, 193, 33, 161, 97, 225, 17, 145, 81,
-		209, 49, 177, 113, 241, 9, 137, 73, 201, 41, 169, 105, 233, 25, 153, 89, 217, 57, 185, 121, 249, 5, 133, 69, 197, 37, 165, 101, 229, 21, 149, 85,
-		213, 53, 181, 117, 245, 13, 141, 77, 205, 45, 173, 109, 237, 29, 157, 93, 221, 61, 189, 125, 253, 19, 275, 147, 403, 83, 339, 211, 467, 51, 307,
-		179, 435, 115, 371, 243, 499, 11, 267, 139, 395, 75, 331, 203, 459, 43, 299, 171, 427, 107, 363, 235, 491, 27, 283, 155, 411, 91, 347, 219, 475,
-		59, 315, 187, 443, 123, 379, 251, 507, 7, 263, 135, 391, 71, 327, 199, 455, 39, 295, 167, 423, 103, 359, 231, 487, 23, 279, 151, 407, 87, 343, 215,
-		471, 55, 311, 183, 439, 119, 375, 247, 503, 15, 271, 143, 399, 79, 335, 207, 463, 47, 303, 175, 431, 111, 367, 239, 495, 31, 287, 159, 415, 95,
-		351, 223, 479, 63, 319, 191, 447, 127, 383, 255, 511, 0, 64, 32, 96, 16, 80, 48, 112, 8, 72, 40, 104, 24, 88, 56, 120, 4, 68, 36, 100, 20, 84, 52,
-		116, 3, 131, 67, 195, 35, 163, 99, 227];
-	const static_ltree2_second_part = extractArray([[144, 8], [112, 9], [24, 7], [8, 8]]);
-	StaticTree.static_ltree = flatArray(static_ltree2_first_part.map((value, index) => [value, static_ltree2_second_part[index]]));
-
-	const static_dtree_first_part = [0, 16, 8, 24, 4, 20, 12, 28, 2, 18, 10, 26, 6, 22, 14, 30, 1, 17, 9, 25, 5, 21, 13, 29, 3, 19, 11, 27, 7, 23];
-	const static_dtree_second_part = extractArray([[30, 5]]);
-	StaticTree.static_dtree = flatArray(static_dtree_first_part.map((value, index) => [value, static_dtree_second_part[index]]));
-
-	StaticTree.static_l_desc = new StaticTree(StaticTree.static_ltree, Tree.extra_lbits, LITERALS + 1, L_CODES, MAX_BITS);
+	function init_block() {
+		let i;
+		// Initialize the trees.
+		for (i = 0; i < L_CODES; i++)
+			dyn_ltree[i * 2] = 0;
+		for (i = 0; i < D_CODES; i++)
+			dyn_dtree[i * 2] = 0;
+		for (i = 0; i < BL_CODES; i++)
+			bl_tree[i * 2] = 0;
+
+		dyn_ltree[END_BLOCK * 2] = 1;
+		that.opt_len = that.static_len = 0;
+		last_lit = matches = 0;
+	}
 
-	StaticTree.static_d_desc = new StaticTree(StaticTree.static_dtree, Tree.extra_dbits, 0, D_CODES, MAX_BITS);
+	// Initialize the tree data structures for a new zlib stream.
+	function tr_init() {
 
-	StaticTree.static_bl_desc = new StaticTree(null, Tree.extra_blbits, 0, BL_CODES, MAX_BL_BITS);
+		l_desc.dyn_tree = dyn_ltree;
+		l_desc.stat_desc = StaticTree.static_l_desc;
 
-	// Deflate
+		d_desc.dyn_tree = dyn_dtree;
+		d_desc.stat_desc = StaticTree.static_d_desc;
 
-	const MAX_MEM_LEVEL = 9;
-	const DEF_MEM_LEVEL = 8;
+		bl_desc.dyn_tree = bl_tree;
+		bl_desc.stat_desc = StaticTree.static_bl_desc;
 
-	function Config(good_length, max_lazy, nice_length, max_chain, func) {
-		const that = this;
-		that.good_length = good_length;
-		that.max_lazy = max_lazy;
-		that.nice_length = nice_length;
-		that.max_chain = max_chain;
-		that.func = func;
-	}
+		bi_buf = 0;
+		bi_valid = 0;
+		last_eob_len = 8; // enough lookahead for inflate
 
-	const STORED = 0;
-	const FAST = 1;
-	const SLOW = 2;
-	const config_table = [
-		new Config(0, 0, 0, 0, STORED),
-		new Config(4, 4, 8, 4, FAST),
-		new Config(4, 5, 16, 8, FAST),
-		new Config(4, 6, 32, 32, FAST),
-		new Config(4, 4, 16, 16, SLOW),
-		new Config(8, 16, 32, 32, SLOW),
-		new Config(8, 16, 128, 128, SLOW),
-		new Config(8, 32, 128, 256, SLOW),
-		new Config(32, 128, 258, 1024, SLOW),
-		new Config(32, 258, 258, 4096, SLOW)
-	];
-
-	const z_errmsg = ["need dictionary", // Z_NEED_DICT
-		// 2
-		"stream end", // Z_STREAM_END 1
-		"", // Z_OK 0
-		"", // Z_ERRNO (-1)
-		"stream error", // Z_STREAM_ERROR (-2)
-		"data error", // Z_DATA_ERROR (-3)
-		"", // Z_MEM_ERROR (-4)
-		"buffer error", // Z_BUF_ERROR (-5)
-		"",// Z_VERSION_ERROR (-6)
-		""];
-
-	// block not completed, need more input or more output
-	const NeedMore = 0;
-
-	// block flush performed
-	const BlockDone = 1;
-
-	// finish started, need only more output at next deflate
-	const FinishStarted = 2;
-
-	// finish done, accept no more input or output
-	const FinishDone = 3;
-
-	// preset dictionary flag in zlib header
-	const PRESET_DICT = 0x20;
-
-	const INIT_STATE = 42;
-	const BUSY_STATE = 113;
-	const FINISH_STATE = 666;
-
-	// The deflate compression method
-	const Z_DEFLATED = 8;
-
-	const STORED_BLOCK = 0;
-	const STATIC_TREES = 1;
-	const DYN_TREES = 2;
-
-	const MIN_MATCH = 3;
-	const MAX_MATCH = 258;
-	const MIN_LOOKAHEAD = (MAX_MATCH + MIN_MATCH + 1);
-
-	function smaller(tree, n, m, depth) {
-		const tn2 = tree[n * 2];
-		const tm2 = tree[m * 2];
-		return (tn2 < tm2 || (tn2 == tm2 && depth[n] <= depth[m]));
+		// Initialize the first block of the first file:
+		init_block();
 	}
 
-	function Deflate() {
-
-		const that = this;
-		let strm; // pointer back to this zlib stream
-		let status; // as the name implies
-		// pending_buf; // output still pending
-		let pending_buf_size; // size of pending_buf
-		// pending_out; // next pending byte to output to the stream
-		// pending; // nb of bytes in the pending buffer
-
-		// dist_buf; // buffer for distances
-		// lc_buf; // buffer for literals or lengths
-		// To simplify the code, dist_buf and lc_buf have the same number of elements.
-		// To use different lengths, an extra flag array would be necessary.
-
-		let last_flush; // value of flush param for previous deflate call
-
-		let w_size; // LZ77 win size (32K by default)
-		let w_bits; // log2(w_size) (8..16)
-		let w_mask; // w_size - 1
-
-		let win;
-		// Sliding win. Input bytes are read into the second half of the win,
-		// and move to the first half later to keep a dictionary of at least wSize
-		// bytes. With this organization, matches are limited to a distance of
-		// wSize-MAX_MATCH bytes, but this ensures that IO is always
-		// performed with a length multiple of the block size. Also, it limits
-		// the win size to 64K, which is quite useful on MSDOS.
-		// To do: use the user input buffer as sliding win.
-
-		let window_size;
-		// Actual size of win: 2*wSize, except when the user input buffer
-		// is directly used as sliding win.
-
-		let prev;
-		// Link to older string with same hash index. To limit the size of this
-		// array to 64K, this link is maintained only for the last 32K strings.
-		// An index in this array is thus a win index modulo 32K.
-
-		let head; // Heads of the hash chains or NIL.
-
-		let ins_h; // hash index of string to be inserted
-		let hash_size; // number of elements in hash table
-		let hash_bits; // log2(hash_size)
-		let hash_mask; // hash_size-1
-
-		// Number of bits by which ins_h must be shifted at each input
-		// step. It must be such that after MIN_MATCH steps, the oldest
-		// byte no longer takes part in the hash key, that is:
-		// hash_shift * MIN_MATCH >= hash_bits
-		let hash_shift;
-
-		// Window position at the beginning of the current output block. Gets
-		// negative when the win is moved backwards.
-
-		let block_start;
-
-		let match_length; // length of best match
-		let prev_match; // previous match
-		let match_available; // set if previous match exists
-		let strstart; // start of string to insert
-		let match_start; // start of matching string
-		let lookahead; // number of valid bytes ahead in win
-
-		// Length of the best match at previous step. Matches not greater than this
-		// are discarded. This is used in the lazy match evaluation.
-		let prev_length;
-
-		// To speed up deflation, hash chains are never searched beyond this
-		// length. A higher limit improves compression ratio but degrades the speed.
-		let max_chain_length;
-
-		// Attempt to find a better match only when the current match is strictly
-		// smaller than this value. This mechanism is used only for compression
-		// levels >= 4.
-		let max_lazy_match;
-
-		// Insert new strings in the hash table only if the match length is not
-		// greater than this length. This saves time but degrades compression.
-		// max_insert_length is used only for compression levels <= 3.
-
-		let level; // compression level (1..9)
-		let strategy; // favor or force Huffman coding
-
-		// Use a faster search when the previous match is longer than this
-		let good_match;
-
-		// Stop searching when current match exceeds this
-		let nice_match;
-
-		let dyn_ltree; // literal and length tree
-		let dyn_dtree; // distance tree
-		let bl_tree; // Huffman tree for bit lengths
-
-		const l_desc = new Tree(); // desc for literal tree
-		const d_desc = new Tree(); // desc for distance tree
-		const bl_desc = new Tree(); // desc for bit length tree
-
-		// that.heap_len; // number of elements in the heap
-		// that.heap_max; // element of largest frequency
-		// The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-		// The same heap array is used to build all trees.
-
-		// Depth of each subtree used as tie breaker for trees of equal frequency
-		that.depth = [];
-
-		// Size of match buffer for literals/lengths. There are 4 reasons for
-		// limiting lit_bufsize to 64K:
-		// - frequencies can be kept in 16 bit counters
-		// - if compression is not successful for the first block, all input
-		// data is still in the win so we can still emit a stored block even
-		// when input comes from standard input. (This can also be done for
-		// all blocks if lit_bufsize is not greater than 32K.)
-		// - if compression is not successful for a file smaller than 64K, we can
-		// even emit a stored file instead of a stored block (saving 5 bytes).
-		// This is applicable only for zip (not gzip or zlib).
-		// - creating new Huffman trees less frequently may not provide fast
-		// adaptation to changes in the input data statistics. (Take for
-		// example a binary file with poorly compressible code followed by
-		// a highly compressible string table.) Smaller buffer sizes give
-		// fast adaptation but have of course the overhead of transmitting
-		// trees more frequently.
-		// - I can't count above 4
-		let lit_bufsize;
-
-		let last_lit; // running index in dist_buf and lc_buf
-
-		// that.opt_len; // bit length of current block with optimal trees
-		// that.static_len; // bit length of current block with static trees
-		let matches; // number of string matches in current block
-		let last_eob_len; // bit length of EOB code for last block
-
-		// Output buffer. bits are inserted starting at the bottom (least
-		// significant bits).
-		let bi_buf;
-
-		// Number of valid bits in bi_buf. All bits above the last valid bit
-		// are always zero.
-		let bi_valid;
-
-		// number of codes at each bit length for an optimal tree
-		that.bl_count = [];
-
-		// heap used to build the Huffman trees
-		that.heap = [];
-
-		dyn_ltree = [];
-		dyn_dtree = [];
-		bl_tree = [];
-
-		function lm_init() {
-			window_size = 2 * w_size;
-
-			head[hash_size - 1] = 0;
-			for (let i = 0; i < hash_size - 1; i++) {
-				head[i] = 0;
+	// Restore the heap property by moving down the tree starting at node k,
+	// exchanging a node with the smallest of its two sons if necessary,
+	// stopping
+	// when the heap property is re-established (each father smaller than its
+	// two sons).
+	that.pqdownheap = function (tree, // the tree to restore
+		k // node to move down
+	) {
+		const heap = that.heap;
+		const v = heap[k];
+		let j = k << 1; // left son of k
+		while (j <= that.heap_len) {
+			// Set j to the smallest of the two sons:
+			if (j < that.heap_len && smaller(tree, heap[j + 1], heap[j], that.depth)) {
+				j++;
 			}
-
-			// Set the default configuration parameters:
-			max_lazy_match = config_table[level].max_lazy;
-			good_match = config_table[level].good_length;
-			nice_match = config_table[level].nice_length;
-			max_chain_length = config_table[level].max_chain;
-
-			strstart = 0;
-			block_start = 0;
-			lookahead = 0;
-			match_length = prev_length = MIN_MATCH - 1;
-			match_available = 0;
-			ins_h = 0;
-		}
-
-		function init_block() {
-			let i;
-			// Initialize the trees.
-			for (i = 0; i < L_CODES; i++)
-				dyn_ltree[i * 2] = 0;
-			for (i = 0; i < D_CODES; i++)
-				dyn_dtree[i * 2] = 0;
-			for (i = 0; i < BL_CODES; i++)
-				bl_tree[i * 2] = 0;
-
-			dyn_ltree[END_BLOCK * 2] = 1;
-			that.opt_len = that.static_len = 0;
-			last_lit = matches = 0;
+			// Exit if v is smaller than both sons
+			if (smaller(tree, v, heap[j], that.depth))
+				break;
+
+			// Exchange v with the smallest son
+			heap[k] = heap[j];
+			k = j;
+			// And continue down the tree, setting j to the left son of k
+			j <<= 1;
 		}
+		heap[k] = v;
+	};
 
-		// Initialize the tree data structures for a new zlib stream.
-		function tr_init() {
-
-			l_desc.dyn_tree = dyn_ltree;
-			l_desc.stat_desc = StaticTree.static_l_desc;
-
-			d_desc.dyn_tree = dyn_dtree;
-			d_desc.stat_desc = StaticTree.static_d_desc;
-
-			bl_desc.dyn_tree = bl_tree;
-			bl_desc.stat_desc = StaticTree.static_bl_desc;
-
-			bi_buf = 0;
-			bi_valid = 0;
-			last_eob_len = 8; // enough lookahead for inflate
-
-			// Initialize the first block of the first file:
-			init_block();
+	// Scan a literal or distance tree to determine the frequencies of the codes
+	// in the bit length tree.
+	function scan_tree(tree,// the tree to be scanned
+		max_code // and its largest code of non zero frequency
+	) {
+		let prevlen = -1; // last emitted length
+		let curlen; // length of current code
+		let nextlen = tree[0 * 2 + 1]; // length of next code
+		let count = 0; // repeat count of the current code
+		let max_count = 7; // max repeat count
+		let min_count = 4; // min repeat count
+
+		if (nextlen === 0) {
+			max_count = 138;
+			min_count = 3;
 		}
-
-		// Restore the heap property by moving down the tree starting at node k,
-		// exchanging a node with the smallest of its two sons if necessary,
-		// stopping
-		// when the heap property is re-established (each father smaller than its
-		// two sons).
-		that.pqdownheap = function (tree, // the tree to restore
-			k // node to move down
-		) {
-			const heap = that.heap;
-			const v = heap[k];
-			let j = k << 1; // left son of k
-			while (j <= that.heap_len) {
-				// Set j to the smallest of the two sons:
-				if (j < that.heap_len && smaller(tree, heap[j + 1], heap[j], that.depth)) {
-					j++;
-				}
-				// Exit if v is smaller than both sons
-				if (smaller(tree, v, heap[j], that.depth))
-					break;
-
-				// Exchange v with the smallest son
-				heap[k] = heap[j];
-				k = j;
-				// And continue down the tree, setting j to the left son of k
-				j <<= 1;
+		tree[(max_code + 1) * 2 + 1] = 0xffff; // guard
+
+		for (let n = 0; n <= max_code; n++) {
+			curlen = nextlen;
+			nextlen = tree[(n + 1) * 2 + 1];
+			if (++count < max_count && curlen == nextlen) {
+				continue;
+			} else if (count < min_count) {
+				bl_tree[curlen * 2] += count;
+			} else if (curlen !== 0) {
+				if (curlen != prevlen)
+					bl_tree[curlen * 2]++;
+				bl_tree[REP_3_6 * 2]++;
+			} else if (count <= 10) {
+				bl_tree[REPZ_3_10 * 2]++;
+			} else {
+				bl_tree[REPZ_11_138 * 2]++;
 			}
-			heap[k] = v;
-		};
-
-		// Scan a literal or distance tree to determine the frequencies of the codes
-		// in the bit length tree.
-		function scan_tree(tree,// the tree to be scanned
-			max_code // and its largest code of non zero frequency
-		) {
-			let prevlen = -1; // last emitted length
-			let curlen; // length of current code
-			let nextlen = tree[0 * 2 + 1]; // length of next code
-			let count = 0; // repeat count of the current code
-			let max_count = 7; // max repeat count
-			let min_count = 4; // min repeat count
-
+			count = 0;
+			prevlen = curlen;
 			if (nextlen === 0) {
 				max_count = 138;
 				min_count = 3;
+			} else if (curlen == nextlen) {
+				max_count = 6;
+				min_count = 3;
+			} else {
+				max_count = 7;
+				min_count = 4;
 			}
-			tree[(max_code + 1) * 2 + 1] = 0xffff; // guard
+		}
+	}
 
-			for (let n = 0; n <= max_code; n++) {
-				curlen = nextlen;
-				nextlen = tree[(n + 1) * 2 + 1];
-				if (++count < max_count && curlen == nextlen) {
-					continue;
-				} else if (count < min_count) {
-					bl_tree[curlen * 2] += count;
-				} else if (curlen !== 0) {
-					if (curlen != prevlen)
-						bl_tree[curlen * 2]++;
-					bl_tree[REP_3_6 * 2]++;
-				} else if (count <= 10) {
-					bl_tree[REPZ_3_10 * 2]++;
-				} else {
-					bl_tree[REPZ_11_138 * 2]++;
-				}
-				count = 0;
-				prevlen = curlen;
-				if (nextlen === 0) {
-					max_count = 138;
-					min_count = 3;
-				} else if (curlen == nextlen) {
-					max_count = 6;
-					min_count = 3;
-				} else {
-					max_count = 7;
-					min_count = 4;
-				}
-			}
+	// Construct the Huffman tree for the bit lengths and return the index in
+	// bl_order of the last bit length code to send.
+	function build_bl_tree() {
+		let max_blindex; // index of last bit length code of non zero freq
+
+		// Determine the bit length frequencies for literal and distance trees
+		scan_tree(dyn_ltree, l_desc.max_code);
+		scan_tree(dyn_dtree, d_desc.max_code);
+
+		// Build the bit length tree:
+		bl_desc.build_tree(that);
+		// opt_len now includes the length of the tree representations, except
+		// the lengths of the bit lengths codes and the 5+5+4 bits for the
+		// counts.
+
+		// Determine the number of bit length codes to send. The pkzip format
+		// requires that at least 4 bit length codes be sent. (appnote.txt says
+		// 3 but the actual value used is 4.)
+		for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) {
+			if (bl_tree[Tree.bl_order[max_blindex] * 2 + 1] !== 0)
+				break;
 		}
+		// Update opt_len to include the bit length tree and counts
+		that.opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4;
 
-		// Construct the Huffman tree for the bit lengths and return the index in
-		// bl_order of the last bit length code to send.
-		function build_bl_tree() {
-			let max_blindex; // index of last bit length code of non zero freq
-
-			// Determine the bit length frequencies for literal and distance trees
-			scan_tree(dyn_ltree, l_desc.max_code);
-			scan_tree(dyn_dtree, d_desc.max_code);
-
-			// Build the bit length tree:
-			bl_desc.build_tree(that);
-			// opt_len now includes the length of the tree representations, except
-			// the lengths of the bit lengths codes and the 5+5+4 bits for the
-			// counts.
-
-			// Determine the number of bit length codes to send. The pkzip format
-			// requires that at least 4 bit length codes be sent. (appnote.txt says
-			// 3 but the actual value used is 4.)
-			for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) {
-				if (bl_tree[Tree.bl_order[max_blindex] * 2 + 1] !== 0)
-					break;
-			}
-			// Update opt_len to include the bit length tree and counts
-			that.opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4;
+		return max_blindex;
+	}
 
-			return max_blindex;
-		}
+	// Output a byte on the stream.
+	// IN assertion: there is enough room in pending_buf.
+	function put_byte(p) {
+		that.pending_buf[that.pending++] = p;
+	}
 
-		// Output a byte on the stream.
-		// IN assertion: there is enough room in pending_buf.
-		function put_byte(p) {
-			that.pending_buf[that.pending++] = p;
-		}
+	function put_short(w) {
+		put_byte(w & 0xff);
+		put_byte((w >>> 8) & 0xff);
+	}
 
-		function put_short(w) {
-			put_byte(w & 0xff);
-			put_byte((w >>> 8) & 0xff);
-		}
+	function putShortMSB(b) {
+		put_byte((b >> 8) & 0xff);
+		put_byte((b & 0xff) & 0xff);
+	}
 
-		function putShortMSB(b) {
-			put_byte((b >> 8) & 0xff);
-			put_byte((b & 0xff) & 0xff);
+	function send_bits(value, length) {
+		let val;
+		const len = length;
+		if (bi_valid > Buf_size - len) {
+			val = value;
+			// bi_buf |= (val << bi_valid);
+			bi_buf |= ((val << bi_valid) & 0xffff);
+			put_short(bi_buf);
+			bi_buf = val >>> (Buf_size - bi_valid);
+			bi_valid += len - Buf_size;
+		} else {
+			// bi_buf |= (value) << bi_valid;
+			bi_buf |= (((value) << bi_valid) & 0xffff);
+			bi_valid += len;
 		}
+	}
 
-		function send_bits(value, length) {
-			let val;
-			const len = length;
-			if (bi_valid > Buf_size - len) {
-				val = value;
-				// bi_buf |= (val << bi_valid);
-				bi_buf |= ((val << bi_valid) & 0xffff);
-				put_short(bi_buf);
-				bi_buf = val >>> (Buf_size - bi_valid);
-				bi_valid += len - Buf_size;
-			} else {
-				// bi_buf |= (value) << bi_valid;
-				bi_buf |= (((value) << bi_valid) & 0xffff);
-				bi_valid += len;
-			}
-		}
+	function send_code(c, tree) {
+		const c2 = c * 2;
+		send_bits(tree[c2] & 0xffff, tree[c2 + 1] & 0xffff);
+	}
 
-		function send_code(c, tree) {
-			const c2 = c * 2;
-			send_bits(tree[c2] & 0xffff, tree[c2 + 1] & 0xffff);
+	// Send a literal or distance tree in compressed form, using the codes in
+	// bl_tree.
+	function send_tree(tree,// the tree to be sent
+		max_code // and its largest code of non zero frequency
+	) {
+		let n; // iterates over all tree elements
+		let prevlen = -1; // last emitted length
+		let curlen; // length of current code
+		let nextlen = tree[0 * 2 + 1]; // length of next code
+		let count = 0; // repeat count of the current code
+		let max_count = 7; // max repeat count
+		let min_count = 4; // min repeat count
+
+		if (nextlen === 0) {
+			max_count = 138;
+			min_count = 3;
 		}
 
-		// Send a literal or distance tree in compressed form, using the codes in
-		// bl_tree.
-		function send_tree(tree,// the tree to be sent
-			max_code // and its largest code of non zero frequency
-		) {
-			let n; // iterates over all tree elements
-			let prevlen = -1; // last emitted length
-			let curlen; // length of current code
-			let nextlen = tree[0 * 2 + 1]; // length of next code
-			let count = 0; // repeat count of the current code
-			let max_count = 7; // max repeat count
-			let min_count = 4; // min repeat count
-
+		for (n = 0; n <= max_code; n++) {
+			curlen = nextlen;
+			nextlen = tree[(n + 1) * 2 + 1];
+			if (++count < max_count && curlen == nextlen) {
+				continue;
+			} else if (count < min_count) {
+				do {
+					send_code(curlen, bl_tree);
+				} while (--count !== 0);
+			} else if (curlen !== 0) {
+				if (curlen != prevlen) {
+					send_code(curlen, bl_tree);
+					count--;
+				}
+				send_code(REP_3_6, bl_tree);
+				send_bits(count - 3, 2);
+			} else if (count <= 10) {
+				send_code(REPZ_3_10, bl_tree);
+				send_bits(count - 3, 3);
+			} else {
+				send_code(REPZ_11_138, bl_tree);
+				send_bits(count - 11, 7);
+			}
+			count = 0;
+			prevlen = curlen;
 			if (nextlen === 0) {
 				max_count = 138;
 				min_count = 3;
-			}
-
-			for (n = 0; n <= max_code; n++) {
-				curlen = nextlen;
-				nextlen = tree[(n + 1) * 2 + 1];
-				if (++count < max_count && curlen == nextlen) {
-					continue;
-				} else if (count < min_count) {
-					do {
-						send_code(curlen, bl_tree);
-					} while (--count !== 0);
-				} else if (curlen !== 0) {
-					if (curlen != prevlen) {
-						send_code(curlen, bl_tree);
-						count--;
-					}
-					send_code(REP_3_6, bl_tree);
-					send_bits(count - 3, 2);
-				} else if (count <= 10) {
-					send_code(REPZ_3_10, bl_tree);
-					send_bits(count - 3, 3);
-				} else {
-					send_code(REPZ_11_138, bl_tree);
-					send_bits(count - 11, 7);
-				}
-				count = 0;
-				prevlen = curlen;
-				if (nextlen === 0) {
-					max_count = 138;
-					min_count = 3;
-				} else if (curlen == nextlen) {
-					max_count = 6;
-					min_count = 3;
-				} else {
-					max_count = 7;
-					min_count = 4;
-				}
+			} else if (curlen == nextlen) {
+				max_count = 6;
+				min_count = 3;
+			} else {
+				max_count = 7;
+				min_count = 4;
 			}
 		}
+	}
 
-		// Send the header for a block using dynamic Huffman trees: the counts, the
-		// lengths of the bit length codes, the literal tree and the distance tree.
-		// IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
-		function send_all_trees(lcodes, dcodes, blcodes) {
-			let rank; // index in bl_order
-
-			send_bits(lcodes - 257, 5); // not +255 as stated in appnote.txt
-			send_bits(dcodes - 1, 5);
-			send_bits(blcodes - 4, 4); // not -3 as stated in appnote.txt
-			for (rank = 0; rank < blcodes; rank++) {
-				send_bits(bl_tree[Tree.bl_order[rank] * 2 + 1], 3);
-			}
-			send_tree(dyn_ltree, lcodes - 1); // literal tree
-			send_tree(dyn_dtree, dcodes - 1); // distance tree
+	// Send the header for a block using dynamic Huffman trees: the counts, the
+	// lengths of the bit length codes, the literal tree and the distance tree.
+	// IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
+	function send_all_trees(lcodes, dcodes, blcodes) {
+		let rank; // index in bl_order
+
+		send_bits(lcodes - 257, 5); // not +255 as stated in appnote.txt
+		send_bits(dcodes - 1, 5);
+		send_bits(blcodes - 4, 4); // not -3 as stated in appnote.txt
+		for (rank = 0; rank < blcodes; rank++) {
+			send_bits(bl_tree[Tree.bl_order[rank] * 2 + 1], 3);
 		}
+		send_tree(dyn_ltree, lcodes - 1); // literal tree
+		send_tree(dyn_dtree, dcodes - 1); // distance tree
+	}
 
-		// Flush the bit buffer, keeping at most 7 bits in it.
-		function bi_flush() {
-			if (bi_valid == 16) {
-				put_short(bi_buf);
-				bi_buf = 0;
-				bi_valid = 0;
-			} else if (bi_valid >= 8) {
-				put_byte(bi_buf & 0xff);
-				bi_buf >>>= 8;
-				bi_valid -= 8;
-			}
+	// Flush the bit buffer, keeping at most 7 bits in it.
+	function bi_flush() {
+		if (bi_valid == 16) {
+			put_short(bi_buf);
+			bi_buf = 0;
+			bi_valid = 0;
+		} else if (bi_valid >= 8) {
+			put_byte(bi_buf & 0xff);
+			bi_buf >>>= 8;
+			bi_valid -= 8;
 		}
+	}
 
-		// Send one empty static block to give enough lookahead for inflate.
-		// This takes 10 bits, of which 7 may remain in the bit buffer.
-		// The current inflate code requires 9 bits of lookahead. If the
-		// last two codes for the previous block (real code plus EOB) were coded
-		// on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
-		// the last real code. In this case we send two empty static blocks instead
-		// of one. (There are no problems if the previous block is stored or fixed.)
-		// To simplify the code, we assume the worst case of last real code encoded
-		// on one bit only.
-		function _tr_align() {
+	// Send one empty static block to give enough lookahead for inflate.
+	// This takes 10 bits, of which 7 may remain in the bit buffer.
+	// The current inflate code requires 9 bits of lookahead. If the
+	// last two codes for the previous block (real code plus EOB) were coded
+	// on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
+	// the last real code. In this case we send two empty static blocks instead
+	// of one. (There are no problems if the previous block is stored or fixed.)
+	// To simplify the code, we assume the worst case of last real code encoded
+	// on one bit only.
+	function _tr_align() {
+		send_bits(STATIC_TREES << 1, 3);
+		send_code(END_BLOCK, StaticTree.static_ltree);
+
+		bi_flush();
+
+		// Of the 10 bits for the empty block, we have already sent
+		// (10 - bi_valid) bits. The lookahead for the last real code (before
+		// the EOB of the previous block) was thus at least one plus the length
+		// of the EOB plus what we have just sent of the empty static block.
+		if (1 + last_eob_len + 10 - bi_valid < 9) {
 			send_bits(STATIC_TREES << 1, 3);
 			send_code(END_BLOCK, StaticTree.static_ltree);
-
 			bi_flush();
-
-			// Of the 10 bits for the empty block, we have already sent
-			// (10 - bi_valid) bits. The lookahead for the last real code (before
-			// the EOB of the previous block) was thus at least one plus the length
-			// of the EOB plus what we have just sent of the empty static block.
-			if (1 + last_eob_len + 10 - bi_valid < 9) {
-				send_bits(STATIC_TREES << 1, 3);
-				send_code(END_BLOCK, StaticTree.static_ltree);
-				bi_flush();
-			}
-			last_eob_len = 7;
 		}
+		last_eob_len = 7;
+	}
 
-		// Save the match info and tally the frequency counts. Return true if
-		// the current block must be flushed.
-		function _tr_tally(dist, // distance of matched string
-			lc // match length-MIN_MATCH or unmatched char (if dist==0)
-		) {
-			let out_length, in_length, dcode;
-			that.dist_buf[last_lit] = dist;
-			that.lc_buf[last_lit] = lc & 0xff;
-			last_lit++;
-
-			if (dist === 0) {
-				// lc is the unmatched char
-				dyn_ltree[lc * 2]++;
-			} else {
-				matches++;
-				// Here, lc is the match length - MIN_MATCH
-				dist--; // dist = match distance - 1
-				dyn_ltree[(Tree._length_code[lc] + LITERALS + 1) * 2]++;
-				dyn_dtree[Tree.d_code(dist) * 2]++;
-			}
+	// Save the match info and tally the frequency counts. Return true if
+	// the current block must be flushed.
+	function _tr_tally(dist, // distance of matched string
+		lc // match length-MIN_MATCH or unmatched char (if dist==0)
+	) {
+		let out_length, in_length, dcode;
+		that.dist_buf[last_lit] = dist;
+		that.lc_buf[last_lit] = lc & 0xff;
+		last_lit++;
+
+		if (dist === 0) {
+			// lc is the unmatched char
+			dyn_ltree[lc * 2]++;
+		} else {
+			matches++;
+			// Here, lc is the match length - MIN_MATCH
+			dist--; // dist = match distance - 1
+			dyn_ltree[(Tree._length_code[lc] + LITERALS + 1) * 2]++;
+			dyn_dtree[Tree.d_code(dist) * 2]++;
+		}
 
-			if ((last_lit & 0x1fff) === 0 && level > 2) {
-				// Compute an upper bound for the compressed length
-				out_length = last_lit * 8;
-				in_length = strstart - block_start;
-				for (dcode = 0; dcode < D_CODES; dcode++) {
-					out_length += dyn_dtree[dcode * 2] * (5 + Tree.extra_dbits[dcode]);
-				}
-				out_length >>>= 3;
-				if ((matches < Math.floor(last_lit / 2)) && out_length < Math.floor(in_length / 2))
-					return true;
+		if ((last_lit & 0x1fff) === 0 && level > 2) {
+			// Compute an upper bound for the compressed length
+			out_length = last_lit * 8;
+			in_length = strstart - block_start;
+			for (dcode = 0; dcode < D_CODES; dcode++) {
+				out_length += dyn_dtree[dcode * 2] * (5 + Tree.extra_dbits[dcode]);
 			}
-
-			return (last_lit == lit_bufsize - 1);
-			// We avoid equality with lit_bufsize because of wraparound at 64K
-			// on 16 bit machines and because stored blocks are restricted to
-			// 64K-1 bytes.
+			out_length >>>= 3;
+			if ((matches < Math.floor(last_lit / 2)) && out_length < Math.floor(in_length / 2))
+				return true;
 		}
 
-		// Send the block data compressed using the given Huffman trees
-		function compress_block(ltree, dtree) {
-			let dist; // distance of matched string
-			let lc; // match length or unmatched char (if dist === 0)
-			let lx = 0; // running index in dist_buf and lc_buf
-			let code; // the code to send
-			let extra; // number of extra bits to send
+		return (last_lit == lit_bufsize - 1);
+		// We avoid equality with lit_bufsize because of wraparound at 64K
+		// on 16 bit machines and because stored blocks are restricted to
+		// 64K-1 bytes.
+	}
 
-			if (last_lit !== 0) {
-				do {
-					dist = that.dist_buf[lx];
-					lc = that.lc_buf[lx];
-					lx++;
-
-					if (dist === 0) {
-						send_code(lc, ltree); // send a literal byte
-					} else {
-						// Here, lc is the match length - MIN_MATCH
-						code = Tree._length_code[lc];
-
-						send_code(code + LITERALS + 1, ltree); // send the length
-						// code
-						extra = Tree.extra_lbits[code];
-						if (extra !== 0) {
-							lc -= Tree.base_length[code];
-							send_bits(lc, extra); // send the extra length bits
-						}
-						dist--; // dist is now the match distance - 1
-						code = Tree.d_code(dist);
-
-						send_code(code, dtree); // send the distance code
-						extra = Tree.extra_dbits[code];
-						if (extra !== 0) {
-							dist -= Tree.base_dist[code];
-							send_bits(dist, extra); // send the extra distance bits
-						}
-					} // literal or match pair ?
-				} while (lx < last_lit);
-			}
+	// Send the block data compressed using the given Huffman trees
+	function compress_block(ltree, dtree) {
+		let dist; // distance of matched string
+		let lc; // match length or unmatched char (if dist === 0)
+		let lx = 0; // running index in dist_buf and lc_buf
+		let code; // the code to send
+		let extra; // number of extra bits to send
 
-			send_code(END_BLOCK, ltree);
-			last_eob_len = ltree[END_BLOCK * 2 + 1];
-		}
+		if (last_lit !== 0) {
+			do {
+				dist = that.dist_buf[lx];
+				lc = that.lc_buf[lx];
+				lx++;
 
-		// Flush the bit buffer and align the output on a byte boundary
-		function bi_windup() {
-			if (bi_valid > 8) {
-				put_short(bi_buf);
-			} else if (bi_valid > 0) {
-				put_byte(bi_buf & 0xff);
-			}
-			bi_buf = 0;
-			bi_valid = 0;
+				if (dist === 0) {
+					send_code(lc, ltree); // send a literal byte
+				} else {
+					// Here, lc is the match length - MIN_MATCH
+					code = Tree._length_code[lc];
+
+					send_code(code + LITERALS + 1, ltree); // send the length
+					// code
+					extra = Tree.extra_lbits[code];
+					if (extra !== 0) {
+						lc -= Tree.base_length[code];
+						send_bits(lc, extra); // send the extra length bits
+					}
+					dist--; // dist is now the match distance - 1
+					code = Tree.d_code(dist);
+
+					send_code(code, dtree); // send the distance code
+					extra = Tree.extra_dbits[code];
+					if (extra !== 0) {
+						dist -= Tree.base_dist[code];
+						send_bits(dist, extra); // send the extra distance bits
+					}
+				} // literal or match pair ?
+			} while (lx < last_lit);
 		}
 
-		// Copy a stored block, storing first the length and its
-		// one's complement if requested.
-		function copy_block(buf, // the input data
-			len, // its length
-			header // true if block header must be written
-		) {
-			bi_windup(); // align on byte boundary
-			last_eob_len = 8; // enough lookahead for inflate
-
-			if (header) {
-				put_short(len);
-				put_short(~len);
-			}
+		send_code(END_BLOCK, ltree);
+		last_eob_len = ltree[END_BLOCK * 2 + 1];
+	}
 
-			that.pending_buf.set(win.subarray(buf, buf + len), that.pending);
-			that.pending += len;
+	// Flush the bit buffer and align the output on a byte boundary
+	function bi_windup() {
+		if (bi_valid > 8) {
+			put_short(bi_buf);
+		} else if (bi_valid > 0) {
+			put_byte(bi_buf & 0xff);
 		}
+		bi_buf = 0;
+		bi_valid = 0;
+	}
 
-		// Send a stored block
-		function _tr_stored_block(buf, // input block
-			stored_len, // length of input block
-			eof // true if this is the last block for a file
-		) {
-			send_bits((STORED_BLOCK << 1) + (eof ? 1 : 0), 3); // send block type
-			copy_block(buf, stored_len, true); // with header
+	// Copy a stored block, storing first the length and its
+	// one's complement if requested.
+	function copy_block(buf, // the input data
+		len, // its length
+		header // true if block header must be written
+	) {
+		bi_windup(); // align on byte boundary
+		last_eob_len = 8; // enough lookahead for inflate
+
+		if (header) {
+			put_short(len);
+			put_short(~len);
 		}
 
-		// Determine the best encoding for the current block: dynamic trees, static
-		// trees or store, and output the encoded block to the zip file.
-		function _tr_flush_block(buf, // input block, or NULL if too old
-			stored_len, // length of input block
-			eof // true if this is the last block for a file
-		) {
-			let opt_lenb, static_lenb;// opt_len and static_len in bytes
-			let max_blindex = 0; // index of last bit length code of non zero freq
-
-			// Build the Huffman trees unless a stored block is forced
-			if (level > 0) {
-				// Construct the literal and distance trees
-				l_desc.build_tree(that);
-
-				d_desc.build_tree(that);
-
-				// At this point, opt_len and static_len are the total bit lengths
-				// of
-				// the compressed block data, excluding the tree representations.
-
-				// Build the bit length tree for the above two trees, and get the
-				// index
-				// in bl_order of the last bit length code to send.
-				max_blindex = build_bl_tree();
-
-				// Determine the best encoding. Compute first the block length in
-				// bytes
-				opt_lenb = (that.opt_len + 3 + 7) >>> 3;
-				static_lenb = (that.static_len + 3 + 7) >>> 3;
-
-				if (static_lenb <= opt_lenb)
-					opt_lenb = static_lenb;
-			} else {
-				opt_lenb = static_lenb = stored_len + 5; // force a stored block
-			}
-
-			if ((stored_len + 4 <= opt_lenb) && buf != -1) {
-				// 4: two words for the lengths
-				// The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-				// Otherwise we can't have processed more than WSIZE input bytes
-				// since
-				// the last block flush, because compression would have been
-				// successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-				// transform a block into a stored block.
-				_tr_stored_block(buf, stored_len, eof);
-			} else if (static_lenb == opt_lenb) {
-				send_bits((STATIC_TREES << 1) + (eof ? 1 : 0), 3);
-				compress_block(StaticTree.static_ltree, StaticTree.static_dtree);
-			} else {
-				send_bits((DYN_TREES << 1) + (eof ? 1 : 0), 3);
-				send_all_trees(l_desc.max_code + 1, d_desc.max_code + 1, max_blindex + 1);
-				compress_block(dyn_ltree, dyn_dtree);
-			}
+		that.pending_buf.set(win.subarray(buf, buf + len), that.pending);
+		that.pending += len;
+	}
 
-			// The above check is made mod 2^32, for files larger than 512 MB
-			// and uLong implemented on 32 bits.
+	// Send a stored block
+	function _tr_stored_block(buf, // input block
+		stored_len, // length of input block
+		eof // true if this is the last block for a file
+	) {
+		send_bits((STORED_BLOCK << 1) + (eof ? 1 : 0), 3); // send block type
+		copy_block(buf, stored_len, true); // with header
+	}
 
-			init_block();
+	// Determine the best encoding for the current block: dynamic trees, static
+	// trees or store, and output the encoded block to the zip file.
+	function _tr_flush_block(buf, // input block, or NULL if too old
+		stored_len, // length of input block
+		eof // true if this is the last block for a file
+	) {
+		let opt_lenb, static_lenb;// opt_len and static_len in bytes
+		let max_blindex = 0; // index of last bit length code of non zero freq
+
+		// Build the Huffman trees unless a stored block is forced
+		if (level > 0) {
+			// Construct the literal and distance trees
+			l_desc.build_tree(that);
+
+			d_desc.build_tree(that);
+
+			// At this point, opt_len and static_len are the total bit lengths
+			// of
+			// the compressed block data, excluding the tree representations.
+
+			// Build the bit length tree for the above two trees, and get the
+			// index
+			// in bl_order of the last bit length code to send.
+			max_blindex = build_bl_tree();
+
+			// Determine the best encoding. Compute first the block length in
+			// bytes
+			opt_lenb = (that.opt_len + 3 + 7) >>> 3;
+			static_lenb = (that.static_len + 3 + 7) >>> 3;
+
+			if (static_lenb <= opt_lenb)
+				opt_lenb = static_lenb;
+		} else {
+			opt_lenb = static_lenb = stored_len + 5; // force a stored block
+		}
 
-			if (eof) {
-				bi_windup();
-			}
+		if ((stored_len + 4 <= opt_lenb) && buf != -1) {
+			// 4: two words for the lengths
+			// The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
+			// Otherwise we can't have processed more than WSIZE input bytes
+			// since
+			// the last block flush, because compression would have been
+			// successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
+			// transform a block into a stored block.
+			_tr_stored_block(buf, stored_len, eof);
+		} else if (static_lenb == opt_lenb) {
+			send_bits((STATIC_TREES << 1) + (eof ? 1 : 0), 3);
+			compress_block(StaticTree.static_ltree, StaticTree.static_dtree);
+		} else {
+			send_bits((DYN_TREES << 1) + (eof ? 1 : 0), 3);
+			send_all_trees(l_desc.max_code + 1, d_desc.max_code + 1, max_blindex + 1);
+			compress_block(dyn_ltree, dyn_dtree);
 		}
 
-		function flush_block_only(eof) {
-			_tr_flush_block(block_start >= 0 ? block_start : -1, strstart - block_start, eof);
-			block_start = strstart;
-			strm.flush_pending();
+		// The above check is made mod 2^32, for files larger than 512 MB
+		// and uLong implemented on 32 bits.
+
+		init_block();
+
+		if (eof) {
+			bi_windup();
 		}
+	}
 
-		// Fill the win when the lookahead becomes insufficient.
-		// Updates strstart and lookahead.
-		//
-		// IN assertion: lookahead < MIN_LOOKAHEAD
-		// OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
-		// At least one byte has been read, or avail_in === 0; reads are
-		// performed for at least two bytes (required for the zip translate_eol
-		// option -- not supported here).
-		function fill_window() {
-			let n, m;
-			let p;
-			let more; // Amount of free space at the end of the win.
+	function flush_block_only(eof) {
+		_tr_flush_block(block_start >= 0 ? block_start : -1, strstart - block_start, eof);
+		block_start = strstart;
+		strm.flush_pending();
+	}
 
-			do {
-				more = (window_size - lookahead - strstart);
-
-				// Deal with !@#$% 64K limit:
-				if (more === 0 && strstart === 0 && lookahead === 0) {
-					more = w_size;
-				} else if (more == -1) {
-					// Very unlikely, but possible on 16 bit machine if strstart ==
-					// 0
-					// and lookahead == 1 (input done one byte at time)
-					more--;
-
-					// If the win is almost full and there is insufficient
-					// lookahead,
-					// move the upper half to the lower one to make room in the
-					// upper half.
-				} else if (strstart >= w_size + w_size - MIN_LOOKAHEAD) {
-					win.set(win.subarray(w_size, w_size + w_size), 0);
-
-					match_start -= w_size;
-					strstart -= w_size; // we now have strstart >= MAX_DIST
-					block_start -= w_size;
-
-					// Slide the hash table (could be avoided with 32 bit values
-					// at the expense of memory usage). We slide even when level ==
-					// 0
-					// to keep the hash table consistent if we switch back to level
-					// > 0
-					// later. (Using level 0 permanently is not an optimal usage of
-					// zlib, so we don't care about this pathological case.)
-
-					n = hash_size;
-					p = n;
-					do {
-						m = (head[--p] & 0xffff);
-						head[p] = (m >= w_size ? m - w_size : 0);
-					} while (--n !== 0);
+	// Fill the win when the lookahead becomes insufficient.
+	// Updates strstart and lookahead.
+	//
+	// IN assertion: lookahead < MIN_LOOKAHEAD
+	// OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+	// At least one byte has been read, or avail_in === 0; reads are
+	// performed for at least two bytes (required for the zip translate_eol
+	// option -- not supported here).
+	function fill_window() {
+		let n, m;
+		let p;
+		let more; // Amount of free space at the end of the win.
+
+		do {
+			more = (window_size - lookahead - strstart);
+
+			// Deal with !@#$% 64K limit:
+			if (more === 0 && strstart === 0 && lookahead === 0) {
+				more = w_size;
+			} else if (more == -1) {
+				// Very unlikely, but possible on 16 bit machine if strstart ==
+				// 0
+				// and lookahead == 1 (input done one byte at time)
+				more--;
+
+				// If the win is almost full and there is insufficient
+				// lookahead,
+				// move the upper half to the lower one to make room in the
+				// upper half.
+			} else if (strstart >= w_size + w_size - MIN_LOOKAHEAD) {
+				win.set(win.subarray(w_size, w_size + w_size), 0);
+
+				match_start -= w_size;
+				strstart -= w_size; // we now have strstart >= MAX_DIST
+				block_start -= w_size;
+
+				// Slide the hash table (could be avoided with 32 bit values
+				// at the expense of memory usage). We slide even when level ==
+				// 0
+				// to keep the hash table consistent if we switch back to level
+				// > 0
+				// later. (Using level 0 permanently is not an optimal usage of
+				// zlib, so we don't care about this pathological case.)
+
+				n = hash_size;
+				p = n;
+				do {
+					m = (head[--p] & 0xffff);
+					head[p] = (m >= w_size ? m - w_size : 0);
+				} while (--n !== 0);
 
-					n = w_size;
-					p = n;
-					do {
-						m = (prev[--p] & 0xffff);
-						prev[p] = (m >= w_size ? m - w_size : 0);
-						// If n is not on any hash chain, prev[n] is garbage but
-						// its value will never be used.
-					} while (--n !== 0);
-					more += w_size;
-				}
+				n = w_size;
+				p = n;
+				do {
+					m = (prev[--p] & 0xffff);
+					prev[p] = (m >= w_size ? m - w_size : 0);
+					// If n is not on any hash chain, prev[n] is garbage but
+					// its value will never be used.
+				} while (--n !== 0);
+				more += w_size;
+			}
 
-				if (strm.avail_in === 0)
-					return;
-
-				// If there was no sliding:
-				// strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-				// more == window_size - lookahead - strstart
-				// => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-				// => more >= window_size - 2*WSIZE + 2
-				// In the BIG_MEM or MMAP case (not yet supported),
-				// window_size == input_size + MIN_LOOKAHEAD &&
-				// strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-				// Otherwise, window_size == 2*WSIZE so more >= 2.
-				// If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-
-				n = strm.read_buf(win, strstart + lookahead, more);
-				lookahead += n;
-
-				// Initialize the hash value now that we have some input:
-				if (lookahead >= MIN_MATCH) {
-					ins_h = win[strstart] & 0xff;
-					ins_h = (((ins_h) << hash_shift) ^ (win[strstart + 1] & 0xff)) & hash_mask;
-				}
-				// If the whole input has less than MIN_MATCH bytes, ins_h is
-				// garbage,
-				// but this is not important since only literal bytes will be
-				// emitted.
-			} while (lookahead < MIN_LOOKAHEAD && strm.avail_in !== 0);
-		}
+			if (strm.avail_in === 0)
+				return;
 
-		// Copy without compression as much as possible from the input stream,
-		// return
-		// the current block state.
-		// This function does not insert new strings in the dictionary since
-		// uncompressible data is probably not useful. This function is used
-		// only for the level=0 compression option.
-		// NOTE: this function should be optimized to avoid extra copying from
-		// win to pending_buf.
-		function deflate_stored(flush) {
-			// Stored blocks are limited to 0xffff bytes, pending_buf is limited
-			// to pending_buf_size, and each stored block has a 5 byte header:
-
-			let max_block_size = 0xffff;
-			let max_start;
-
-			if (max_block_size > pending_buf_size - 5) {
-				max_block_size = pending_buf_size - 5;
+			// If there was no sliding:
+			// strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+			// more == window_size - lookahead - strstart
+			// => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+			// => more >= window_size - 2*WSIZE + 2
+			// In the BIG_MEM or MMAP case (not yet supported),
+			// window_size == input_size + MIN_LOOKAHEAD &&
+			// strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+			// Otherwise, window_size == 2*WSIZE so more >= 2.
+			// If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+
+			n = strm.read_buf(win, strstart + lookahead, more);
+			lookahead += n;
+
+			// Initialize the hash value now that we have some input:
+			if (lookahead >= MIN_MATCH) {
+				ins_h = win[strstart] & 0xff;
+				ins_h = (((ins_h) << hash_shift) ^ (win[strstart + 1] & 0xff)) & hash_mask;
 			}
+			// If the whole input has less than MIN_MATCH bytes, ins_h is
+			// garbage,
+			// but this is not important since only literal bytes will be
+			// emitted.
+		} while (lookahead < MIN_LOOKAHEAD && strm.avail_in !== 0);
+	}
 
-			// Copy as much as possible from input to output:
-			// eslint-disable-next-line no-constant-condition
-			while (true) {
-				// Fill the win as much as possible:
-				if (lookahead <= 1) {
-					fill_window();
-					if (lookahead === 0 && flush == Z_NO_FLUSH)
-						return NeedMore;
-					if (lookahead === 0)
-						break; // flush the current block
-				}
+	// Copy without compression as much as possible from the input stream,
+	// return
+	// the current block state.
+	// This function does not insert new strings in the dictionary since
+	// uncompressible data is probably not useful. This function is used
+	// only for the level=0 compression option.
+	// NOTE: this function should be optimized to avoid extra copying from
+	// win to pending_buf.
+	function deflate_stored(flush) {
+		// Stored blocks are limited to 0xffff bytes, pending_buf is limited
+		// to pending_buf_size, and each stored block has a 5 byte header:
+
+		let max_block_size = 0xffff;
+		let max_start;
+
+		if (max_block_size > pending_buf_size - 5) {
+			max_block_size = pending_buf_size - 5;
+		}
 
-				strstart += lookahead;
-				lookahead = 0;
+		// Copy as much as possible from input to output:
+		// eslint-disable-next-line no-constant-condition
+		while (true) {
+			// Fill the win as much as possible:
+			if (lookahead <= 1) {
+				fill_window();
+				if (lookahead === 0 && flush == Z_NO_FLUSH)
+					return NeedMore;
+				if (lookahead === 0)
+					break; // flush the current block
+			}
 
-				// Emit a stored block if pending_buf will be full:
-				max_start = block_start + max_block_size;
-				if (strstart === 0 || strstart >= max_start) {
-					// strstart === 0 is possible when wraparound on 16-bit machine
-					lookahead = (strstart - max_start);
-					strstart = max_start;
+			strstart += lookahead;
+			lookahead = 0;
 
-					flush_block_only(false);
-					if (strm.avail_out === 0)
-						return NeedMore;
+			// Emit a stored block if pending_buf will be full:
+			max_start = block_start + max_block_size;
+			if (strstart === 0 || strstart >= max_start) {
+				// strstart === 0 is possible when wraparound on 16-bit machine
+				lookahead = (strstart - max_start);
+				strstart = max_start;
 
-				}
+				flush_block_only(false);
+				if (strm.avail_out === 0)
+					return NeedMore;
 
-				// Flush if we may have to slide, otherwise block_start may become
-				// negative and the data will be gone:
-				if (strstart - block_start >= w_size - MIN_LOOKAHEAD) {
-					flush_block_only(false);
-					if (strm.avail_out === 0)
-						return NeedMore;
-				}
 			}
 
-			flush_block_only(flush == Z_FINISH);
-			if (strm.avail_out === 0)
-				return (flush == Z_FINISH) ? FinishStarted : NeedMore;
-
-			return flush == Z_FINISH ? FinishDone : BlockDone;
+			// Flush if we may have to slide, otherwise block_start may become
+			// negative and the data will be gone:
+			if (strstart - block_start >= w_size - MIN_LOOKAHEAD) {
+				flush_block_only(false);
+				if (strm.avail_out === 0)
+					return NeedMore;
+			}
 		}
 
-		function longest_match(cur_match) {
-			let chain_length = max_chain_length; // max hash chain length
-			let scan = strstart; // current string
-			let match; // matched string
-			let len; // length of current match
-			let best_len = prev_length; // best match length so far
-			const limit = strstart > (w_size - MIN_LOOKAHEAD) ? strstart - (w_size - MIN_LOOKAHEAD) : 0;
-			let _nice_match = nice_match;
-
-			// Stop when cur_match becomes <= limit. To simplify the code,
-			// we prevent matches with the string of win index 0.
+		flush_block_only(flush == Z_FINISH);
+		if (strm.avail_out === 0)
+			return (flush == Z_FINISH) ? FinishStarted : NeedMore;
 
-			const wmask = w_mask;
+		return flush == Z_FINISH ? FinishDone : BlockDone;
+	}
 
-			const strend = strstart + MAX_MATCH;
-			let scan_end1 = win[scan + best_len - 1];
-			let scan_end = win[scan + best_len];
+	function longest_match(cur_match) {
+		let chain_length = max_chain_length; // max hash chain length
+		let scan = strstart; // current string
+		let match; // matched string
+		let len; // length of current match
+		let best_len = prev_length; // best match length so far
+		const limit = strstart > (w_size - MIN_LOOKAHEAD) ? strstart - (w_size - MIN_LOOKAHEAD) : 0;
+		let _nice_match = nice_match;
 
-			// The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of
-			// 16.
-			// It is easy to get rid of this optimization if necessary.
+		// Stop when cur_match becomes <= limit. To simplify the code,
+		// we prevent matches with the string of win index 0.
 
-			// Do not waste too much time if we already have a good match:
-			if (prev_length >= good_match) {
-				chain_length >>= 2;
-			}
+		const wmask = w_mask;
 
-			// Do not look for matches beyond the end of the input. This is
-			// necessary
-			// to make deflate deterministic.
-			if (_nice_match > lookahead)
-				_nice_match = lookahead;
+		const strend = strstart + MAX_MATCH;
+		let scan_end1 = win[scan + best_len - 1];
+		let scan_end = win[scan + best_len];
 
-			do {
-				match = cur_match;
+		// The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of
+		// 16.
+		// It is easy to get rid of this optimization if necessary.
 
-				// Skip to next match if the match length cannot increase
-				// or if the match length is less than 2:
-				if (win[match + best_len] != scan_end || win[match + best_len - 1] != scan_end1 || win[match] != win[scan]
-					|| win[++match] != win[scan + 1])
-					continue;
+		// Do not waste too much time if we already have a good match:
+		if (prev_length >= good_match) {
+			chain_length >>= 2;
+		}
 
-				// The check at best_len-1 can be removed because it will be made
-				// again later. (This heuristic is not always a win.)
-				// It is not necessary to compare scan[2] and match[2] since they
-				// are always equal when the other bytes match, given that
-				// the hash keys are equal and that HASH_BITS >= 8.
-				scan += 2;
-				match++;
-
-				// We check for insufficient lookahead only every 8th comparison;
-				// the 256th check will be made at strstart+258.
-				// eslint-disable-next-line no-empty
-				do {
-					// empty block
-				} while (win[++scan] == win[++match] && win[++scan] == win[++match] && win[++scan] == win[++match]
-				&& win[++scan] == win[++match] && win[++scan] == win[++match] && win[++scan] == win[++match]
-				&& win[++scan] == win[++match] && win[++scan] == win[++match] && scan < strend);
-
-				len = MAX_MATCH - (strend - scan);
-				scan = strend - MAX_MATCH;
-
-				if (len > best_len) {
-					match_start = cur_match;
-					best_len = len;
-					if (len >= _nice_match)
-						break;
-					scan_end1 = win[scan + best_len - 1];
-					scan_end = win[scan + best_len];
-				}
+		// Do not look for matches beyond the end of the input. This is
+		// necessary
+		// to make deflate deterministic.
+		if (_nice_match > lookahead)
+			_nice_match = lookahead;
+
+		do {
+			match = cur_match;
+
+			// Skip to next match if the match length cannot increase
+			// or if the match length is less than 2:
+			if (win[match + best_len] != scan_end || win[match + best_len - 1] != scan_end1 || win[match] != win[scan]
+				|| win[++match] != win[scan + 1])
+				continue;
+
+			// The check at best_len-1 can be removed because it will be made
+			// again later. (This heuristic is not always a win.)
+			// It is not necessary to compare scan[2] and match[2] since they
+			// are always equal when the other bytes match, given that
+			// the hash keys are equal and that HASH_BITS >= 8.
+			scan += 2;
+			match++;
+
+			// We check for insufficient lookahead only every 8th comparison;
+			// the 256th check will be made at strstart+258.
+			// eslint-disable-next-line no-empty
+			do {
+				// empty block
+			} while (win[++scan] == win[++match] && win[++scan] == win[++match] && win[++scan] == win[++match]
+			&& win[++scan] == win[++match] && win[++scan] == win[++match] && win[++scan] == win[++match]
+			&& win[++scan] == win[++match] && win[++scan] == win[++match] && scan < strend);
+
+			len = MAX_MATCH - (strend - scan);
+			scan = strend - MAX_MATCH;
+
+			if (len > best_len) {
+				match_start = cur_match;
+				best_len = len;
+				if (len >= _nice_match)
+					break;
+				scan_end1 = win[scan + best_len - 1];
+				scan_end = win[scan + best_len];
+			}
 
-			} while ((cur_match = (prev[cur_match & wmask] & 0xffff)) > limit && --chain_length !== 0);
+		} while ((cur_match = (prev[cur_match & wmask] & 0xffff)) > limit && --chain_length !== 0);
 
-			if (best_len <= lookahead)
-				return best_len;
-			return lookahead;
-		}
+		if (best_len <= lookahead)
+			return best_len;
+		return lookahead;
+	}
 
-		// Compress as much as possible from the input stream, return the current
-		// block state.
-		// This function does not perform lazy evaluation of matches and inserts
-		// new strings in the dictionary only for unmatched strings or for short
-		// matches. It is used only for the fast compression options.
-		function deflate_fast(flush) {
-			// short hash_head = 0; // head of the hash chain
-			let hash_head = 0; // head of the hash chain
-			let bflush; // set if current block must be flushed
-
-			// eslint-disable-next-line no-constant-condition
-			while (true) {
-				// Make sure that we always have enough lookahead, except
-				// at the end of the input file. We need MAX_MATCH bytes
-				// for the next match, plus MIN_MATCH bytes to insert the
-				// string following the next match.
-				if (lookahead < MIN_LOOKAHEAD) {
-					fill_window();
-					if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-						return NeedMore;
-					}
-					if (lookahead === 0)
-						break; // flush the current block
+	// Compress as much as possible from the input stream, return the current
+	// block state.
+	// This function does not perform lazy evaluation of matches and inserts
+	// new strings in the dictionary only for unmatched strings or for short
+	// matches. It is used only for the fast compression options.
+	function deflate_fast(flush) {
+		// short hash_head = 0; // head of the hash chain
+		let hash_head = 0; // head of the hash chain
+		let bflush; // set if current block must be flushed
+
+		// eslint-disable-next-line no-constant-condition
+		while (true) {
+			// Make sure that we always have enough lookahead, except
+			// at the end of the input file. We need MAX_MATCH bytes
+			// for the next match, plus MIN_MATCH bytes to insert the
+			// string following the next match.
+			if (lookahead < MIN_LOOKAHEAD) {
+				fill_window();
+				if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+					return NeedMore;
 				}
+				if (lookahead === 0)
+					break; // flush the current block
+			}
 
-				// Insert the string win[strstart .. strstart+2] in the
-				// dictionary, and set hash_head to the head of the hash chain:
-				if (lookahead >= MIN_MATCH) {
-					ins_h = (((ins_h) << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+			// Insert the string win[strstart .. strstart+2] in the
+			// dictionary, and set hash_head to the head of the hash chain:
+			if (lookahead >= MIN_MATCH) {
+				ins_h = (((ins_h) << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
 
-					// prev[strstart&w_mask]=hash_head=head[ins_h];
-					hash_head = (head[ins_h] & 0xffff);
-					prev[strstart & w_mask] = head[ins_h];
-					head[ins_h] = strstart;
-				}
+				// prev[strstart&w_mask]=hash_head=head[ins_h];
+				hash_head = (head[ins_h] & 0xffff);
+				prev[strstart & w_mask] = head[ins_h];
+				head[ins_h] = strstart;
+			}
 
-				// Find the longest match, discarding those <= prev_length.
-				// At this point we have always match_length < MIN_MATCH
+			// Find the longest match, discarding those <= prev_length.
+			// At this point we have always match_length < MIN_MATCH
 
-				if (hash_head !== 0 && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
-					// To simplify the code, we prevent matches with the string
-					// of win index 0 (in particular we have to avoid a match
-					// of the string with itself at the start of the input file).
-					if (strategy != Z_HUFFMAN_ONLY) {
-						match_length = longest_match(hash_head);
-					}
-					// longest_match() sets match_start
+			if (hash_head !== 0 && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
+				// To simplify the code, we prevent matches with the string
+				// of win index 0 (in particular we have to avoid a match
+				// of the string with itself at the start of the input file).
+				if (strategy != Z_HUFFMAN_ONLY) {
+					match_length = longest_match(hash_head);
 				}
-				if (match_length >= MIN_MATCH) {
-					// check_match(strstart, match_start, match_length);
+				// longest_match() sets match_start
+			}
+			if (match_length >= MIN_MATCH) {
+				// check_match(strstart, match_start, match_length);
 
-					bflush = _tr_tally(strstart - match_start, match_length - MIN_MATCH);
+				bflush = _tr_tally(strstart - match_start, match_length - MIN_MATCH);
 
-					lookahead -= match_length;
+				lookahead -= match_length;
 
-					// Insert new strings in the hash table only if the match length
-					// is not too large. This saves time but degrades compression.
-					if (match_length <= max_lazy_match && lookahead >= MIN_MATCH) {
-						match_length--; // string at strstart already in hash table
-						do {
-							strstart++;
+				// Insert new strings in the hash table only if the match length
+				// is not too large. This saves time but degrades compression.
+				if (match_length <= max_lazy_match && lookahead >= MIN_MATCH) {
+					match_length--; // string at strstart already in hash table
+					do {
+						strstart++;
 
-							ins_h = ((ins_h << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-							// prev[strstart&w_mask]=hash_head=head[ins_h];
-							hash_head = (head[ins_h] & 0xffff);
-							prev[strstart & w_mask] = head[ins_h];
-							head[ins_h] = strstart;
+						ins_h = ((ins_h << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+						// prev[strstart&w_mask]=hash_head=head[ins_h];
+						hash_head = (head[ins_h] & 0xffff);
+						prev[strstart & w_mask] = head[ins_h];
+						head[ins_h] = strstart;
 
-							// strstart never exceeds WSIZE-MAX_MATCH, so there are
-							// always MIN_MATCH bytes ahead.
-						} while (--match_length !== 0);
-						strstart++;
-					} else {
-						strstart += match_length;
-						match_length = 0;
-						ins_h = win[strstart] & 0xff;
-
-						ins_h = (((ins_h) << hash_shift) ^ (win[strstart + 1] & 0xff)) & hash_mask;
-						// If lookahead < MIN_MATCH, ins_h is garbage, but it does
-						// not
-						// matter since it will be recomputed at next deflate call.
-					}
+						// strstart never exceeds WSIZE-MAX_MATCH, so there are
+						// always MIN_MATCH bytes ahead.
+					} while (--match_length !== 0);
+					strstart++;
 				} else {
-					// No match, output a literal byte
+					strstart += match_length;
+					match_length = 0;
+					ins_h = win[strstart] & 0xff;
 
-					bflush = _tr_tally(0, win[strstart] & 0xff);
-					lookahead--;
-					strstart++;
+					ins_h = (((ins_h) << hash_shift) ^ (win[strstart + 1] & 0xff)) & hash_mask;
+					// If lookahead < MIN_MATCH, ins_h is garbage, but it does
+					// not
+					// matter since it will be recomputed at next deflate call.
 				}
-				if (bflush) {
+			} else {
+				// No match, output a literal byte
 
-					flush_block_only(false);
-					if (strm.avail_out === 0)
-						return NeedMore;
-				}
+				bflush = _tr_tally(0, win[strstart] & 0xff);
+				lookahead--;
+				strstart++;
 			}
+			if (bflush) {
 
-			flush_block_only(flush == Z_FINISH);
-			if (strm.avail_out === 0) {
-				if (flush == Z_FINISH)
-					return FinishStarted;
-				else
+				flush_block_only(false);
+				if (strm.avail_out === 0)
 					return NeedMore;
 			}
-			return flush == Z_FINISH ? FinishDone : BlockDone;
 		}
 
-		// Same as above, but achieves better compression. We use a lazy
-		// evaluation for matches: a match is finally adopted only if there is
-		// no better match at the next win position.
-		function deflate_slow(flush) {
-			// short hash_head = 0; // head of hash chain
-			let hash_head = 0; // head of hash chain
-			let bflush; // set if current block must be flushed
-			let max_insert;
-
-			// Process the input block.
-			// eslint-disable-next-line no-constant-condition
-			while (true) {
-				// Make sure that we always have enough lookahead, except
-				// at the end of the input file. We need MAX_MATCH bytes
-				// for the next match, plus MIN_MATCH bytes to insert the
-				// string following the next match.
-
-				if (lookahead < MIN_LOOKAHEAD) {
-					fill_window();
-					if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-						return NeedMore;
-					}
-					if (lookahead === 0)
-						break; // flush the current block
-				}
-
-				// Insert the string win[strstart .. strstart+2] in the
-				// dictionary, and set hash_head to the head of the hash chain:
+		flush_block_only(flush == Z_FINISH);
+		if (strm.avail_out === 0) {
+			if (flush == Z_FINISH)
+				return FinishStarted;
+			else
+				return NeedMore;
+		}
+		return flush == Z_FINISH ? FinishDone : BlockDone;
+	}
 
-				if (lookahead >= MIN_MATCH) {
-					ins_h = (((ins_h) << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-					// prev[strstart&w_mask]=hash_head=head[ins_h];
-					hash_head = (head[ins_h] & 0xffff);
-					prev[strstart & w_mask] = head[ins_h];
-					head[ins_h] = strstart;
+	// Same as above, but achieves better compression. We use a lazy
+	// evaluation for matches: a match is finally adopted only if there is
+	// no better match at the next win position.
+	function deflate_slow(flush) {
+		// short hash_head = 0; // head of hash chain
+		let hash_head = 0; // head of hash chain
+		let bflush; // set if current block must be flushed
+		let max_insert;
+
+		// Process the input block.
+		// eslint-disable-next-line no-constant-condition
+		while (true) {
+			// Make sure that we always have enough lookahead, except
+			// at the end of the input file. We need MAX_MATCH bytes
+			// for the next match, plus MIN_MATCH bytes to insert the
+			// string following the next match.
+
+			if (lookahead < MIN_LOOKAHEAD) {
+				fill_window();
+				if (lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+					return NeedMore;
 				}
+				if (lookahead === 0)
+					break; // flush the current block
+			}
 
-				// Find the longest match, discarding those <= prev_length.
-				prev_length = match_length;
-				prev_match = match_start;
-				match_length = MIN_MATCH - 1;
+			// Insert the string win[strstart .. strstart+2] in the
+			// dictionary, and set hash_head to the head of the hash chain:
 
-				if (hash_head !== 0 && prev_length < max_lazy_match && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
-					// To simplify the code, we prevent matches with the string
-					// of win index 0 (in particular we have to avoid a match
-					// of the string with itself at the start of the input file).
+			if (lookahead >= MIN_MATCH) {
+				ins_h = (((ins_h) << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+				// prev[strstart&w_mask]=hash_head=head[ins_h];
+				hash_head = (head[ins_h] & 0xffff);
+				prev[strstart & w_mask] = head[ins_h];
+				head[ins_h] = strstart;
+			}
 
-					if (strategy != Z_HUFFMAN_ONLY) {
-						match_length = longest_match(hash_head);
-					}
-					// longest_match() sets match_start
+			// Find the longest match, discarding those <= prev_length.
+			prev_length = match_length;
+			prev_match = match_start;
+			match_length = MIN_MATCH - 1;
 
-					if (match_length <= 5 && (strategy == Z_FILTERED || (match_length == MIN_MATCH && strstart - match_start > 4096))) {
+			if (hash_head !== 0 && prev_length < max_lazy_match && ((strstart - hash_head) & 0xffff) <= w_size - MIN_LOOKAHEAD) {
+				// To simplify the code, we prevent matches with the string
+				// of win index 0 (in particular we have to avoid a match
+				// of the string with itself at the start of the input file).
 
-						// If prev_match is also MIN_MATCH, match_start is garbage
-						// but we will ignore the current match anyway.
-						match_length = MIN_MATCH - 1;
-					}
+				if (strategy != Z_HUFFMAN_ONLY) {
+					match_length = longest_match(hash_head);
 				}
+				// longest_match() sets match_start
 
-				// If there was a match at the previous step and the current
-				// match is not better, output the previous match:
-				if (prev_length >= MIN_MATCH && match_length <= prev_length) {
-					max_insert = strstart + lookahead - MIN_MATCH;
-					// Do not insert strings in hash table beyond this.
-
-					// check_match(strstart-1, prev_match, prev_length);
-
-					bflush = _tr_tally(strstart - 1 - prev_match, prev_length - MIN_MATCH);
+				if (match_length <= 5 && (strategy == Z_FILTERED || (match_length == MIN_MATCH && strstart - match_start > 4096))) {
 
-					// Insert in hash table all strings up to the end of the match.
-					// strstart-1 and strstart are already inserted. If there is not
-					// enough lookahead, the last two strings are not inserted in
-					// the hash table.
-					lookahead -= prev_length - 1;
-					prev_length -= 2;
-					do {
-						if (++strstart <= max_insert) {
-							ins_h = (((ins_h) << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-							// prev[strstart&w_mask]=hash_head=head[ins_h];
-							hash_head = (head[ins_h] & 0xffff);
-							prev[strstart & w_mask] = head[ins_h];
-							head[ins_h] = strstart;
-						}
-					} while (--prev_length !== 0);
-					match_available = 0;
+					// If prev_match is also MIN_MATCH, match_start is garbage
+					// but we will ignore the current match anyway.
 					match_length = MIN_MATCH - 1;
-					strstart++;
+				}
+			}
 
-					if (bflush) {
-						flush_block_only(false);
-						if (strm.avail_out === 0)
-							return NeedMore;
-					}
-				} else if (match_available !== 0) {
+			// If there was a match at the previous step and the current
+			// match is not better, output the previous match:
+			if (prev_length >= MIN_MATCH && match_length <= prev_length) {
+				max_insert = strstart + lookahead - MIN_MATCH;
+				// Do not insert strings in hash table beyond this.
 
-					// If there was no match at the previous position, output a
-					// single literal. If there was a match but the current match
-					// is longer, truncate the previous match to a single literal.
+				// check_match(strstart-1, prev_match, prev_length);
 
-					bflush = _tr_tally(0, win[strstart - 1] & 0xff);
+				bflush = _tr_tally(strstart - 1 - prev_match, prev_length - MIN_MATCH);
 
-					if (bflush) {
-						flush_block_only(false);
+				// Insert in hash table all strings up to the end of the match.
+				// strstart-1 and strstart are already inserted. If there is not
+				// enough lookahead, the last two strings are not inserted in
+				// the hash table.
+				lookahead -= prev_length - 1;
+				prev_length -= 2;
+				do {
+					if (++strstart <= max_insert) {
+						ins_h = (((ins_h) << hash_shift) ^ (win[(strstart) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+						// prev[strstart&w_mask]=hash_head=head[ins_h];
+						hash_head = (head[ins_h] & 0xffff);
+						prev[strstart & w_mask] = head[ins_h];
+						head[ins_h] = strstart;
 					}
-					strstart++;
-					lookahead--;
+				} while (--prev_length !== 0);
+				match_available = 0;
+				match_length = MIN_MATCH - 1;
+				strstart++;
+
+				if (bflush) {
+					flush_block_only(false);
 					if (strm.avail_out === 0)
 						return NeedMore;
-				} else {
-					// There is no previous match to compare with, wait for
-					// the next step to decide.
-
-					match_available = 1;
-					strstart++;
-					lookahead--;
 				}
-			}
+			} else if (match_available !== 0) {
+
+				// If there was no match at the previous position, output a
+				// single literal. If there was a match but the current match
+				// is longer, truncate the previous match to a single literal.
 
-			if (match_available !== 0) {
 				bflush = _tr_tally(0, win[strstart - 1] & 0xff);
-				match_available = 0;
-			}
-			flush_block_only(flush == Z_FINISH);
 
-			if (strm.avail_out === 0) {
-				if (flush == Z_FINISH)
-					return FinishStarted;
-				else
+				if (bflush) {
+					flush_block_only(false);
+				}
+				strstart++;
+				lookahead--;
+				if (strm.avail_out === 0)
 					return NeedMore;
+			} else {
+				// There is no previous match to compare with, wait for
+				// the next step to decide.
+
+				match_available = 1;
+				strstart++;
+				lookahead--;
 			}
+		}
 
-			return flush == Z_FINISH ? FinishDone : BlockDone;
+		if (match_available !== 0) {
+			bflush = _tr_tally(0, win[strstart - 1] & 0xff);
+			match_available = 0;
 		}
+		flush_block_only(flush == Z_FINISH);
 
-		function deflateReset(strm) {
-			strm.total_in = strm.total_out = 0;
-			strm.msg = null; //
+		if (strm.avail_out === 0) {
+			if (flush == Z_FINISH)
+				return FinishStarted;
+			else
+				return NeedMore;
+		}
 
-			that.pending = 0;
-			that.pending_out = 0;
+		return flush == Z_FINISH ? FinishDone : BlockDone;
+	}
 
-			status = BUSY_STATE;
+	function deflateReset(strm) {
+		strm.total_in = strm.total_out = 0;
+		strm.msg = null; //
 
-			last_flush = Z_NO_FLUSH;
+		that.pending = 0;
+		that.pending_out = 0;
 
-			tr_init();
-			lm_init();
-			return Z_OK;
-		}
+		status = BUSY_STATE;
 
-		that.deflateInit = function (strm, _level, bits, _method, memLevel, _strategy) {
-			if (!_method)
-				_method = Z_DEFLATED;
-			if (!memLevel)
-				memLevel = DEF_MEM_LEVEL;
-			if (!_strategy)
-				_strategy = Z_DEFAULT_STRATEGY;
+		last_flush = Z_NO_FLUSH;
 
-			// byte[] my_version=ZLIB_VERSION;
+		tr_init();
+		lm_init();
+		return Z_OK;
+	}
 
-			//
-			// if (!version || version[0] != my_version[0]
-			// || stream_size != sizeof(z_stream)) {
-			// return Z_VERSION_ERROR;
-			// }
+	that.deflateInit = function (strm, _level, bits, _method, memLevel, _strategy) {
+		if (!_method)
+			_method = Z_DEFLATED;
+		if (!memLevel)
+			memLevel = DEF_MEM_LEVEL;
+		if (!_strategy)
+			_strategy = Z_DEFAULT_STRATEGY;
 
-			strm.msg = null;
+		// byte[] my_version=ZLIB_VERSION;
 
-			if (_level == Z_DEFAULT_COMPRESSION)
-				_level = 6;
+		//
+		// if (!version || version[0] != my_version[0]
+		// || stream_size != sizeof(z_stream)) {
+		// return Z_VERSION_ERROR;
+		// }
 
-			if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || _method != Z_DEFLATED || bits < 9 || bits > 15 || _level < 0 || _level > 9 || _strategy < 0
-				|| _strategy > Z_HUFFMAN_ONLY) {
-				return Z_STREAM_ERROR;
-			}
+		strm.msg = null;
 
-			strm.dstate = that;
+		if (_level == Z_DEFAULT_COMPRESSION)
+			_level = 6;
 
-			w_bits = bits;
-			w_size = 1 << w_bits;
-			w_mask = w_size - 1;
+		if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || _method != Z_DEFLATED || bits < 9 || bits > 15 || _level < 0 || _level > 9 || _strategy < 0
+			|| _strategy > Z_HUFFMAN_ONLY) {
+			return Z_STREAM_ERROR;
+		}
 
-			hash_bits = memLevel + 7;
-			hash_size = 1 << hash_bits;
-			hash_mask = hash_size - 1;
-			hash_shift = Math.floor((hash_bits + MIN_MATCH - 1) / MIN_MATCH);
+		strm.dstate = that;
 
-			win = new Uint8Array(w_size * 2);
-			prev = [];
-			head = [];
+		w_bits = bits;
+		w_size = 1 << w_bits;
+		w_mask = w_size - 1;
 
-			lit_bufsize = 1 << (memLevel + 6); // 16K elements by default
+		hash_bits = memLevel + 7;
+		hash_size = 1 << hash_bits;
+		hash_mask = hash_size - 1;
+		hash_shift = Math.floor((hash_bits + MIN_MATCH - 1) / MIN_MATCH);
 
-			that.pending_buf = new Uint8Array(lit_bufsize * 4);
-			pending_buf_size = lit_bufsize * 4;
+		win = new Uint8Array(w_size * 2);
+		prev = [];
+		head = [];
 
-			that.dist_buf = new Uint16Array(lit_bufsize);
-			that.lc_buf = new Uint8Array(lit_bufsize);
+		lit_bufsize = 1 << (memLevel + 6); // 16K elements by default
 
-			level = _level;
+		that.pending_buf = new Uint8Array(lit_bufsize * 4);
+		pending_buf_size = lit_bufsize * 4;
 
-			strategy = _strategy;
+		that.dist_buf = new Uint16Array(lit_bufsize);
+		that.lc_buf = new Uint8Array(lit_bufsize);
 
-			return deflateReset(strm);
-		};
+		level = _level;
 
-		that.deflateEnd = function () {
-			if (status != INIT_STATE && status != BUSY_STATE && status != FINISH_STATE) {
-				return Z_STREAM_ERROR;
-			}
-			// Deallocate in reverse order of allocations:
-			that.lc_buf = null;
-			that.dist_buf = null;
-			that.pending_buf = null;
-			head = null;
-			prev = null;
-			win = null;
-			// free
-			that.dstate = null;
-			return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-		};
-
-		that.deflateParams = function (strm, _level, _strategy) {
-			let err = Z_OK;
-
-			if (_level == Z_DEFAULT_COMPRESSION) {
-				_level = 6;
-			}
-			if (_level < 0 || _level > 9 || _strategy < 0 || _strategy > Z_HUFFMAN_ONLY) {
-				return Z_STREAM_ERROR;
-			}
+		strategy = _strategy;
 
-			if (config_table[level].func != config_table[_level].func && strm.total_in !== 0) {
-				// Flush the last buffer:
-				err = strm.deflate(Z_PARTIAL_FLUSH);
-			}
+		return deflateReset(strm);
+	};
 
-			if (level != _level) {
-				level = _level;
-				max_lazy_match = config_table[level].max_lazy;
-				good_match = config_table[level].good_length;
-				nice_match = config_table[level].nice_length;
-				max_chain_length = config_table[level].max_chain;
-			}
-			strategy = _strategy;
-			return err;
-		};
+	that.deflateEnd = function () {
+		if (status != INIT_STATE && status != BUSY_STATE && status != FINISH_STATE) {
+			return Z_STREAM_ERROR;
+		}
+		// Deallocate in reverse order of allocations:
+		that.lc_buf = null;
+		that.dist_buf = null;
+		that.pending_buf = null;
+		head = null;
+		prev = null;
+		win = null;
+		// free
+		that.dstate = null;
+		return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+	};
 
-		that.deflateSetDictionary = function (_strm, dictionary, dictLength) {
-			let length = dictLength;
-			let n, index = 0;
+	that.deflateParams = function (strm, _level, _strategy) {
+		let err = Z_OK;
 
-			if (!dictionary || status != INIT_STATE)
-				return Z_STREAM_ERROR;
+		if (_level == Z_DEFAULT_COMPRESSION) {
+			_level = 6;
+		}
+		if (_level < 0 || _level > 9 || _strategy < 0 || _strategy > Z_HUFFMAN_ONLY) {
+			return Z_STREAM_ERROR;
+		}
 
-			if (length < MIN_MATCH)
-				return Z_OK;
-			if (length > w_size - MIN_LOOKAHEAD) {
-				length = w_size - MIN_LOOKAHEAD;
-				index = dictLength - length; // use the tail of the dictionary
-			}
-			win.set(dictionary.subarray(index, index + length), 0);
+		if (config_table[level].func != config_table[_level].func && strm.total_in !== 0) {
+			// Flush the last buffer:
+			err = strm.deflate(Z_PARTIAL_FLUSH);
+		}
 
-			strstart = length;
-			block_start = length;
+		if (level != _level) {
+			level = _level;
+			max_lazy_match = config_table[level].max_lazy;
+			good_match = config_table[level].good_length;
+			nice_match = config_table[level].nice_length;
+			max_chain_length = config_table[level].max_chain;
+		}
+		strategy = _strategy;
+		return err;
+	};
 
-			// Insert all strings in the hash table (except for the last two bytes).
-			// s->lookahead stays null, so s->ins_h will be recomputed at the next
-			// call of fill_window.
+	that.deflateSetDictionary = function (_strm, dictionary, dictLength) {
+		let length = dictLength;
+		let n, index = 0;
 
-			ins_h = win[0] & 0xff;
-			ins_h = (((ins_h) << hash_shift) ^ (win[1] & 0xff)) & hash_mask;
+		if (!dictionary || status != INIT_STATE)
+			return Z_STREAM_ERROR;
 
-			for (n = 0; n <= length - MIN_MATCH; n++) {
-				ins_h = (((ins_h) << hash_shift) ^ (win[(n) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
-				prev[n & w_mask] = head[ins_h];
-				head[ins_h] = n;
-			}
+		if (length < MIN_MATCH)
 			return Z_OK;
-		};
+		if (length > w_size - MIN_LOOKAHEAD) {
+			length = w_size - MIN_LOOKAHEAD;
+			index = dictLength - length; // use the tail of the dictionary
+		}
+		win.set(dictionary.subarray(index, index + length), 0);
 
-		that.deflate = function (_strm, flush) {
-			let i, header, level_flags, old_flush, bstate;
+		strstart = length;
+		block_start = length;
 
-			if (flush > Z_FINISH || flush < 0) {
-				return Z_STREAM_ERROR;
-			}
+		// Insert all strings in the hash table (except for the last two bytes).
+		// s->lookahead stays null, so s->ins_h will be recomputed at the next
+		// call of fill_window.
 
-			if (!_strm.next_out || (!_strm.next_in && _strm.avail_in !== 0) || (status == FINISH_STATE && flush != Z_FINISH)) {
-				_strm.msg = z_errmsg[Z_NEED_DICT - (Z_STREAM_ERROR)];
-				return Z_STREAM_ERROR;
-			}
-			if (_strm.avail_out === 0) {
-				_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
-				return Z_BUF_ERROR;
-			}
+		ins_h = win[0] & 0xff;
+		ins_h = (((ins_h) << hash_shift) ^ (win[1] & 0xff)) & hash_mask;
 
-			strm = _strm; // just in case
-			old_flush = last_flush;
-			last_flush = flush;
+		for (n = 0; n <= length - MIN_MATCH; n++) {
+			ins_h = (((ins_h) << hash_shift) ^ (win[(n) + (MIN_MATCH - 1)] & 0xff)) & hash_mask;
+			prev[n & w_mask] = head[ins_h];
+			head[ins_h] = n;
+		}
+		return Z_OK;
+	};
 
-			// Write the zlib header
-			if (status == INIT_STATE) {
-				header = (Z_DEFLATED + ((w_bits - 8) << 4)) << 8;
-				level_flags = ((level - 1) & 0xff) >> 1;
+	that.deflate = function (_strm, flush) {
+		let i, header, level_flags, old_flush, bstate;
 
-				if (level_flags > 3)
-					level_flags = 3;
-				header |= (level_flags << 6);
-				if (strstart !== 0)
-					header |= PRESET_DICT;
-				header += 31 - (header % 31);
+		if (flush > Z_FINISH || flush < 0) {
+			return Z_STREAM_ERROR;
+		}
 
-				status = BUSY_STATE;
-				putShortMSB(header);
-			}
+		if (!_strm.next_out || (!_strm.next_in && _strm.avail_in !== 0) || (status == FINISH_STATE && flush != Z_FINISH)) {
+			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_STREAM_ERROR)];
+			return Z_STREAM_ERROR;
+		}
+		if (_strm.avail_out === 0) {
+			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
+			return Z_BUF_ERROR;
+		}
 
-			// Flush as much pending output as possible
-			if (that.pending !== 0) {
-				strm.flush_pending();
-				if (strm.avail_out === 0) {
-					// console.log(" avail_out==0");
-					// Since avail_out is 0, deflate will be called again with
-					// more output space, but possibly with both pending and
-					// avail_in equal to zero. There won't be anything to do,
-					// but this is not an error situation so make sure we
-					// return OK instead of BUF_ERROR at next call of deflate:
-					last_flush = -1;
-					return Z_OK;
-				}
+		strm = _strm; // just in case
+		old_flush = last_flush;
+		last_flush = flush;
+
+		// Write the zlib header
+		if (status == INIT_STATE) {
+			header = (Z_DEFLATED + ((w_bits - 8) << 4)) << 8;
+			level_flags = ((level - 1) & 0xff) >> 1;
+
+			if (level_flags > 3)
+				level_flags = 3;
+			header |= (level_flags << 6);
+			if (strstart !== 0)
+				header |= PRESET_DICT;
+			header += 31 - (header % 31);
+
+			status = BUSY_STATE;
+			putShortMSB(header);
+		}
 
-				// Make sure there is something to do and avoid duplicate
-				// consecutive
-				// flushes. For repeated and useless calls with Z_FINISH, we keep
-				// returning Z_STREAM_END instead of Z_BUFF_ERROR.
-			} else if (strm.avail_in === 0 && flush <= old_flush && flush != Z_FINISH) {
-				strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
-				return Z_BUF_ERROR;
+		// Flush as much pending output as possible
+		if (that.pending !== 0) {
+			strm.flush_pending();
+			if (strm.avail_out === 0) {
+				// console.log(" avail_out==0");
+				// Since avail_out is 0, deflate will be called again with
+				// more output space, but possibly with both pending and
+				// avail_in equal to zero. There won't be anything to do,
+				// but this is not an error situation so make sure we
+				// return OK instead of BUF_ERROR at next call of deflate:
+				last_flush = -1;
+				return Z_OK;
 			}
 
-			// User must not provide more input after the first FINISH:
-			if (status == FINISH_STATE && strm.avail_in !== 0) {
-				_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
-				return Z_BUF_ERROR;
+			// Make sure there is something to do and avoid duplicate
+			// consecutive
+			// flushes. For repeated and useless calls with Z_FINISH, we keep
+			// returning Z_STREAM_END instead of Z_BUFF_ERROR.
+		} else if (strm.avail_in === 0 && flush <= old_flush && flush != Z_FINISH) {
+			strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
+			return Z_BUF_ERROR;
+		}
+
+		// User must not provide more input after the first FINISH:
+		if (status == FINISH_STATE && strm.avail_in !== 0) {
+			_strm.msg = z_errmsg[Z_NEED_DICT - (Z_BUF_ERROR)];
+			return Z_BUF_ERROR;
+		}
+
+		// Start a new block or continue the current one.
+		if (strm.avail_in !== 0 || lookahead !== 0 || (flush != Z_NO_FLUSH && status != FINISH_STATE)) {
+			bstate = -1;
+			switch (config_table[level].func) {
+				case STORED:
+					bstate = deflate_stored(flush);
+					break;
+				case FAST:
+					bstate = deflate_fast(flush);
+					break;
+				case SLOW:
+					bstate = deflate_slow(flush);
+					break;
+				default:
 			}
 
-			// Start a new block or continue the current one.
-			if (strm.avail_in !== 0 || lookahead !== 0 || (flush != Z_NO_FLUSH && status != FINISH_STATE)) {
-				bstate = -1;
-				switch (config_table[level].func) {
-					case STORED:
-						bstate = deflate_stored(flush);
-						break;
-					case FAST:
-						bstate = deflate_fast(flush);
-						break;
-					case SLOW:
-						bstate = deflate_slow(flush);
-						break;
-					default:
+			if (bstate == FinishStarted || bstate == FinishDone) {
+				status = FINISH_STATE;
+			}
+			if (bstate == NeedMore || bstate == FinishStarted) {
+				if (strm.avail_out === 0) {
+					last_flush = -1; // avoid BUF_ERROR next call, see above
 				}
+				return Z_OK;
+				// If flush != Z_NO_FLUSH && avail_out === 0, the next call
+				// of deflate should use the same flush parameter to make sure
+				// that the flush is complete. So we don't have to output an
+				// empty block here, this will be done at next call. This also
+				// ensures that for a very small output buffer, we emit at most
+				// one empty block.
+			}
 
-				if (bstate == FinishStarted || bstate == FinishDone) {
-					status = FINISH_STATE;
-				}
-				if (bstate == NeedMore || bstate == FinishStarted) {
-					if (strm.avail_out === 0) {
-						last_flush = -1; // avoid BUF_ERROR next call, see above
+			if (bstate == BlockDone) {
+				if (flush == Z_PARTIAL_FLUSH) {
+					_tr_align();
+				} else { // FULL_FLUSH or SYNC_FLUSH
+					_tr_stored_block(0, 0, false);
+					// For a full flush, this empty block will be recognized
+					// as a special marker by inflate_sync().
+					if (flush == Z_FULL_FLUSH) {
+						// state.head[s.hash_size-1]=0;
+						for (i = 0; i < hash_size/*-1*/; i++)
+							// forget history
+							head[i] = 0;
 					}
-					return Z_OK;
-					// If flush != Z_NO_FLUSH && avail_out === 0, the next call
-					// of deflate should use the same flush parameter to make sure
-					// that the flush is complete. So we don't have to output an
-					// empty block here, this will be done at next call. This also
-					// ensures that for a very small output buffer, we emit at most
-					// one empty block.
 				}
-
-				if (bstate == BlockDone) {
-					if (flush == Z_PARTIAL_FLUSH) {
-						_tr_align();
-					} else { // FULL_FLUSH or SYNC_FLUSH
-						_tr_stored_block(0, 0, false);
-						// For a full flush, this empty block will be recognized
-						// as a special marker by inflate_sync().
-						if (flush == Z_FULL_FLUSH) {
-							// state.head[s.hash_size-1]=0;
-							for (i = 0; i < hash_size/*-1*/; i++)
-								// forget history
-								head[i] = 0;
-						}
-					}
-					strm.flush_pending();
-					if (strm.avail_out === 0) {
-						last_flush = -1; // avoid BUF_ERROR at next call, see above
-						return Z_OK;
-					}
+				strm.flush_pending();
+				if (strm.avail_out === 0) {
+					last_flush = -1; // avoid BUF_ERROR at next call, see above
+					return Z_OK;
 				}
 			}
+		}
 
-			if (flush != Z_FINISH)
-				return Z_OK;
-			return Z_STREAM_END;
-		};
-	}
-
-	// ZStream
-
-	function ZStream() {
+		if (flush != Z_FINISH)
+			return Z_OK;
+		return Z_STREAM_END;
+	};
+}
+
+// ZStream
+
+function ZStream() {
+	const that = this;
+	that.next_in_index = 0;
+	that.next_out_index = 0;
+	// that.next_in; // next input byte
+	that.avail_in = 0; // number of bytes available at next_in
+	that.total_in = 0; // total nb of input bytes read so far
+	// that.next_out; // next output byte should be put there
+	that.avail_out = 0; // remaining free space at next_out
+	that.total_out = 0; // total nb of bytes output so far
+	// that.msg;
+	// that.dstate;
+}
+
+ZStream.prototype = {
+	deflateInit(level, bits) {
 		const that = this;
-		that.next_in_index = 0;
-		that.next_out_index = 0;
-		// that.next_in; // next input byte
-		that.avail_in = 0; // number of bytes available at next_in
-		that.total_in = 0; // total nb of input bytes read so far
-		// that.next_out; // next output byte should be put there
-		that.avail_out = 0; // remaining free space at next_out
-		that.total_out = 0; // total nb of bytes output so far
-		// that.msg;
-		// that.dstate;
-	}
-
-	ZStream.prototype = {
-		deflateInit(level, bits) {
-			const that = this;
-			that.dstate = new Deflate();
-			if (!bits)
-				bits = MAX_BITS;
-			return that.dstate.deflateInit(that, level, bits);
-		},
-
-		deflate(flush) {
-			const that = this;
-			if (!that.dstate) {
-				return Z_STREAM_ERROR;
-			}
-			return that.dstate.deflate(that, flush);
-		},
-
-		deflateEnd() {
-			const that = this;
-			if (!that.dstate)
-				return Z_STREAM_ERROR;
-			const ret = that.dstate.deflateEnd();
-			that.dstate = null;
-			return ret;
-		},
-
-		deflateParams(level, strategy) {
-			const that = this;
-			if (!that.dstate)
-				return Z_STREAM_ERROR;
-			return that.dstate.deflateParams(that, level, strategy);
-		},
-
-		deflateSetDictionary(dictionary, dictLength) {
-			const that = this;
-			if (!that.dstate)
-				return Z_STREAM_ERROR;
-			return that.dstate.deflateSetDictionary(that, dictionary, dictLength);
-		},
-
-		// Read a new buffer from the current input stream, update the
-		// total number of bytes read. All deflate() input goes through
-		// this function so some applications may wish to modify it to avoid
-		// allocating a large strm->next_in buffer and copying from it.
-		// (See also flush_pending()).
-		read_buf(buf, start, size) {
-			const that = this;
-			let len = that.avail_in;
-			if (len > size)
-				len = size;
-			if (len === 0)
-				return 0;
-			that.avail_in -= len;
-			buf.set(that.next_in.subarray(that.next_in_index, that.next_in_index + len), start);
-			that.next_in_index += len;
-			that.total_in += len;
-			return len;
-		},
-
-		// Flush as much pending output as possible. All deflate() output goes
-		// through this function so some applications may wish to modify it
-		// to avoid allocating a large strm->next_out buffer and copying into it.
-		// (See also read_buf()).
-		flush_pending() {
-			const that = this;
-			let len = that.dstate.pending;
-
-			if (len > that.avail_out)
-				len = that.avail_out;
-			if (len === 0)
-				return;
+		that.dstate = new Deflate();
+		if (!bits)
+			bits = MAX_BITS;
+		return that.dstate.deflateInit(that, level, bits);
+	},
 
-			// if (that.dstate.pending_buf.length <= that.dstate.pending_out || that.next_out.length <= that.next_out_index
-			// || that.dstate.pending_buf.length < (that.dstate.pending_out + len) || that.next_out.length < (that.next_out_index +
-			// len)) {
-			// console.log(that.dstate.pending_buf.length + ", " + that.dstate.pending_out + ", " + that.next_out.length + ", " +
-			// that.next_out_index + ", " + len);
-			// console.log("avail_out=" + that.avail_out);
-			// }
-
-			that.next_out.set(that.dstate.pending_buf.subarray(that.dstate.pending_out, that.dstate.pending_out + len), that.next_out_index);
-
-			that.next_out_index += len;
-			that.dstate.pending_out += len;
-			that.total_out += len;
-			that.avail_out -= len;
-			that.dstate.pending -= len;
-			if (that.dstate.pending === 0) {
-				that.dstate.pending_out = 0;
-			}
+	deflate(flush) {
+		const that = this;
+		if (!that.dstate) {
+			return Z_STREAM_ERROR;
 		}
-	};
+		return that.dstate.deflate(that, flush);
+	},
 
-	// Deflate
+	deflateEnd() {
+		const that = this;
+		if (!that.dstate)
+			return Z_STREAM_ERROR;
+		const ret = that.dstate.deflateEnd();
+		that.dstate = null;
+		return ret;
+	},
+
+	deflateParams(level, strategy) {
+		const that = this;
+		if (!that.dstate)
+			return Z_STREAM_ERROR;
+		return that.dstate.deflateParams(that, level, strategy);
+	},
 
-	function ZipDeflate(options) {
+	deflateSetDictionary(dictionary, dictLength) {
 		const that = this;
-		const z = new ZStream();
-		const bufsize = getMaximumCompressedSize(options && options.chunkSize ? options.chunkSize : 64 * 1024);
-		const flush = Z_NO_FLUSH;
-		const buf = new Uint8Array(bufsize);
-		let level = options ? options.level : Z_DEFAULT_COMPRESSION;
-		if (typeof level == "undefined")
-			level = Z_DEFAULT_COMPRESSION;
-		z.deflateInit(level);
-		z.next_out = buf;
-
-		that.append = function (data, onprogress) {
-			let err, array, lastIndex = 0, bufferIndex = 0, bufferSize = 0;
-			const buffers = [];
-			if (!data.length)
-				return;
-			z.next_in_index = 0;
-			z.next_in = data;
-			z.avail_in = data.length;
-			do {
-				z.next_out_index = 0;
-				z.avail_out = bufsize;
-				err = z.deflate(flush);
-				if (err != Z_OK)
-					throw new Error("deflating: " + z.msg);
-				if (z.next_out_index)
-					if (z.next_out_index == bufsize)
-						buffers.push(new Uint8Array(buf));
-					else
-						buffers.push(buf.slice(0, z.next_out_index));
-				bufferSize += z.next_out_index;
-				if (onprogress && z.next_in_index > 0 && z.next_in_index != lastIndex) {
-					onprogress(z.next_in_index);
-					lastIndex = z.next_in_index;
-				}
-			} while (z.avail_in > 0 || z.avail_out === 0);
-			if (buffers.length > 1) {
-				array = new Uint8Array(bufferSize);
-				buffers.forEach(function (chunk) {
-					array.set(chunk, bufferIndex);
-					bufferIndex += chunk.length;
-				});
-			} else {
-				array = buffers[0] || new Uint8Array();
-			}
-			return array;
-		};
-		that.flush = function () {
-			let err, array, bufferIndex = 0, bufferSize = 0;
-			const buffers = [];
-			do {
-				z.next_out_index = 0;
-				z.avail_out = bufsize;
-				err = z.deflate(Z_FINISH);
-				if (err != Z_STREAM_END && err != Z_OK)
-					throw new Error("deflating: " + z.msg);
-				if (bufsize - z.avail_out > 0)
+		if (!that.dstate)
+			return Z_STREAM_ERROR;
+		return that.dstate.deflateSetDictionary(that, dictionary, dictLength);
+	},
+
+	// Read a new buffer from the current input stream, update the
+	// total number of bytes read. All deflate() input goes through
+	// this function so some applications may wish to modify it to avoid
+	// allocating a large strm->next_in buffer and copying from it.
+	// (See also flush_pending()).
+	read_buf(buf, start, size) {
+		const that = this;
+		let len = that.avail_in;
+		if (len > size)
+			len = size;
+		if (len === 0)
+			return 0;
+		that.avail_in -= len;
+		buf.set(that.next_in.subarray(that.next_in_index, that.next_in_index + len), start);
+		that.next_in_index += len;
+		that.total_in += len;
+		return len;
+	},
+
+	// Flush as much pending output as possible. All deflate() output goes
+	// through this function so some applications may wish to modify it
+	// to avoid allocating a large strm->next_out buffer and copying into it.
+	// (See also read_buf()).
+	flush_pending() {
+		const that = this;
+		let len = that.dstate.pending;
+
+		if (len > that.avail_out)
+			len = that.avail_out;
+		if (len === 0)
+			return;
+
+		// if (that.dstate.pending_buf.length <= that.dstate.pending_out || that.next_out.length <= that.next_out_index
+		// || that.dstate.pending_buf.length < (that.dstate.pending_out + len) || that.next_out.length < (that.next_out_index +
+		// len)) {
+		// console.log(that.dstate.pending_buf.length + ", " + that.dstate.pending_out + ", " + that.next_out.length + ", " +
+		// that.next_out_index + ", " + len);
+		// console.log("avail_out=" + that.avail_out);
+		// }
+
+		that.next_out.set(that.dstate.pending_buf.subarray(that.dstate.pending_out, that.dstate.pending_out + len), that.next_out_index);
+
+		that.next_out_index += len;
+		that.dstate.pending_out += len;
+		that.total_out += len;
+		that.avail_out -= len;
+		that.dstate.pending -= len;
+		if (that.dstate.pending === 0) {
+			that.dstate.pending_out = 0;
+		}
+	}
+};
+
+// Deflate
+
+function ZipDeflate(options) {
+	const that = this;
+	const z = new ZStream();
+	const bufsize = getMaximumCompressedSize(options && options.chunkSize ? options.chunkSize : 64 * 1024);
+	const flush = Z_NO_FLUSH;
+	const buf = new Uint8Array(bufsize);
+	let level = options ? options.level : Z_DEFAULT_COMPRESSION;
+	if (typeof level == "undefined")
+		level = Z_DEFAULT_COMPRESSION;
+	z.deflateInit(level);
+	z.next_out = buf;
+
+	that.append = function (data, onprogress) {
+		let err, array, lastIndex = 0, bufferIndex = 0, bufferSize = 0;
+		const buffers = [];
+		if (!data.length)
+			return;
+		z.next_in_index = 0;
+		z.next_in = data;
+		z.avail_in = data.length;
+		do {
+			z.next_out_index = 0;
+			z.avail_out = bufsize;
+			err = z.deflate(flush);
+			if (err != Z_OK)
+				throw new Error("deflating: " + z.msg);
+			if (z.next_out_index)
+				if (z.next_out_index == bufsize)
+					buffers.push(new Uint8Array(buf));
+				else
 					buffers.push(buf.slice(0, z.next_out_index));
-				bufferSize += z.next_out_index;
-			} while (z.avail_in > 0 || z.avail_out === 0);
-			z.deflateEnd();
+			bufferSize += z.next_out_index;
+			if (onprogress && z.next_in_index > 0 && z.next_in_index != lastIndex) {
+				onprogress(z.next_in_index);
+				lastIndex = z.next_in_index;
+			}
+		} while (z.avail_in > 0 || z.avail_out === 0);
+		if (buffers.length > 1) {
 			array = new Uint8Array(bufferSize);
 			buffers.forEach(function (chunk) {
 				array.set(chunk, bufferIndex);
 				bufferIndex += chunk.length;
 			});
-			return array;
-		};
-	}
-
-	function getMaximumCompressedSize(uncompressedSize) {
-		return uncompressedSize + (5 * (Math.floor(uncompressedSize / 16383) + 1));
-	}
-
-	return ZipDeflate;
+		} else {
+			array = buffers[0] || new Uint8Array();
+		}
+		return array;
+	};
+	that.flush = function () {
+		let err, array, bufferIndex = 0, bufferSize = 0;
+		const buffers = [];
+		do {
+			z.next_out_index = 0;
+			z.avail_out = bufsize;
+			err = z.deflate(Z_FINISH);
+			if (err != Z_STREAM_END && err != Z_OK)
+				throw new Error("deflating: " + z.msg);
+			if (bufsize - z.avail_out > 0)
+				buffers.push(buf.slice(0, z.next_out_index));
+			bufferSize += z.next_out_index;
+		} while (z.avail_in > 0 || z.avail_out === 0);
+		z.deflateEnd();
+		array = new Uint8Array(bufferSize);
+		buffers.forEach(function (chunk) {
+			array.set(chunk, bufferIndex);
+			bufferIndex += chunk.length;
+		});
+		return array;
+	};
+}
 
-})();
+function getMaximumCompressedSize(uncompressedSize) {
+	return uncompressedSize + (5 * (Math.floor(uncompressedSize / 16383) + 1));
+}
 
-export default ZipDeflate;
+export {
+	ZipDeflate as Deflate
+};