@zerodensity/smb-cpp 0.0.0-bootstrap.0 → 0.1.0

package/darwin_arm64/third-party/libsmb2/source/examples/dcerpc.c

@@ -0,0 +1,254 @@
+/* -*-  mode:c; tab-width:8; c-basic-offset:8; indent-tabs-mode:nil;  -*- */
+/*
+   Copyright (C) 2020 by Ronnie Sahlberg <ronniesahlberg@gmail.com>
+
+Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#define _GNU_SOURCE
+
+#include <inttypes.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "smb2.h"
+#include "libsmb2.h"
+#include "libsmb2-raw.h"
+#include "libsmb2-dcerpc.h"
+#include "libsmb2-dcerpc-srvsvc.h"
+
+#ifndef discard_const
+#define discard_const(ptr) ((void *)((intptr_t)(ptr)))
+#endif
+
+int is_finished;
+struct dcerpc_service *service;
+uint8_t buf[65536];
+struct smb2_iovec iov = {buf, sizeof(buf), NULL};
+int offset;
+
+
+struct rpc_cb_data {
+        struct dcerpc_procedure *proc;
+        void *req;
+        struct dcerpc_pdu *req_pdu;
+        void *rep;
+        struct dcerpc_pdu *rep_pdu;
+};
+
+int usage(void)
+{
+        fprintf(stderr, "Usage:\n"
+                "dcerpc <smb2-url> request.yaml\n\n"
+                "URL format: "
+                "smb://[<domain;][<username>@]<host>[:<port>]/IPC$/<service-name>\n");
+        exit(1);
+}
+
+void si_cb(struct dcerpc_context *dce, int status,
+                void *command_data, void *cb_data)
+{
+        struct rpc_cb_data *rpc_cb_data = cb_data;
+        int offset;
+
+        offset = 0;
+        memset(buf, 0, sizeof(buf));
+
+        printf("YAML:\n");
+        printf("---\n");
+        rpc_cb_data->rep = command_data;
+        rpc_cb_data->rep_pdu = dcerpc_allocate_pdu(dce, ENCODING_YAML, DCERPC_ENCODE, rpc_cb_data->proc->rep_size);
+        if (rpc_cb_data->rep_pdu == NULL) {
+                printf("failed to allocate Response pdu\n");
+                exit(10);
+        }
+        
+        /* We might need to reference req from the reply */
+        dcerpc_set_request(rpc_cb_data->rep_pdu, rpc_cb_data->req);
+        if (dcerpc_do_coder(rpc_cb_data->proc->name, dce, rpc_cb_data->rep_pdu, &iov, &offset, rpc_cb_data->rep, rpc_cb_data->proc->rep_coder)) {
+                printf("Failed to encode REP as YAML\n");
+                exit(10);
+        }
+        printf("%s\n", iov.buf);
+
+        
+        free(rpc_cb_data->req);
+        dcerpc_free_pdu(dce, rpc_cb_data->req_pdu);
+        dcerpc_free_data(dce, rpc_cb_data->rep);
+        dcerpc_free_pdu(dce, rpc_cb_data->rep_pdu);
+        
+        free(rpc_cb_data);
+
+        is_finished = 1;
+}
+
+void co_cb(struct dcerpc_context *dce, int status,
+           void *command_data, void *cb_data)
+{
+        int i;
+        char *name;
+        struct rpc_cb_data *rpc_cb_data;
+
+        if (status != SMB2_STATUS_SUCCESS) {
+                printf("failed to connect to SRVSVC (%s) %s\n",
+                       strerror(-status), dcerpc_get_error(dce));
+                exit(10);
+        }
+
+        rpc_cb_data = calloc(1, sizeof(*rpc_cb_data));
+        if (rpc_cb_data == NULL) {
+                printf("Failed to allocate rpc_cb_data structure\n");
+                exit(9);
+        }
+        
+        /* Find the name of the procedure */
+        name = (char *)&iov.buf[offset];
+        while (offset < iov.len && iov.buf[offset] != ':') {
+                offset++;
+        }
+        for (i = 0; service->procs[i].name; i++) {
+                if (!strncmp(name, service->procs[i].name, offset)) {
+                        rpc_cb_data->proc = &service->procs[i];
+                        break;
+                }
+        }
+        offset = 0;
+
+        if (rpc_cb_data->proc == NULL) {
+                printf("Could not find a procedure with the name %s\n", name);
+                exit(9);
+        }
+
+        rpc_cb_data->req = calloc(1, rpc_cb_data->proc->req_size);
+        if (rpc_cb_data->req == NULL) {
+                printf("failed to allocate Request structure\n");
+                exit(10);
+        }
+
+        rpc_cb_data->req_pdu = dcerpc_allocate_pdu(dce, ENCODING_YAML, DCERPC_DECODE, rpc_cb_data->proc->req_size);
+        if (rpc_cb_data->req_pdu == NULL) {
+                printf("Failed to allocate request PDU\n");
+                exit(9);
+        }
+        if (dcerpc_do_coder(rpc_cb_data->proc->name, dce, rpc_cb_data->req_pdu, &iov, &offset, rpc_cb_data->req, rpc_cb_data->proc->req_coder)) {
+                printf("Failed to decode REQ from YAML\n");
+                exit(10);
+        }
+
+        if (dcerpc_call_async(dce,
+                              rpc_cb_data->proc->opnum,
+                              rpc_cb_data->proc->req_coder, rpc_cb_data->req,
+                              rpc_cb_data->proc->rep_coder, rpc_cb_data->proc->rep_size,
+                              si_cb, rpc_cb_data) != 0) {
+                printf("dcerpc_call_async failed with %s\n",
+                       dcerpc_get_error(dce));
+                exit(10);
+        }
+}
+
+int main(int argc, char *argv[])
+{
+        struct smb2_context *smb2;
+        struct dcerpc_context *dce;
+        struct smb2_url *url;
+	struct pollfd pfd;
+        int i, fd;
+
+        if (argc < 3) {
+                usage();
+        }
+
+        fd = open(argv[2], O_RDONLY);
+        if (fd == -1) {
+                printf("Failed to open yaml file : %s\n", argv[2]);
+                exit(9);
+        }
+        read(fd, iov.buf, iov.len);
+        close(fd);
+
+	smb2 = smb2_init_context();
+        if (smb2 == NULL) {
+                fprintf(stderr, "Failed to init context\n");
+                exit(0);
+        }
+
+        url = smb2_parse_url(smb2, argv[1]);
+        if (url == NULL) {
+                fprintf(stderr, "Failed to parse url: %s\n",
+                        smb2_get_error(smb2));
+                exit(0);
+        }
+        if (url->user) {
+                smb2_set_user(smb2, url->user);
+        }
+
+        smb2_set_security_mode(smb2, SMB2_NEGOTIATE_SIGNING_ENABLED);
+
+        if (smb2_connect_share(smb2, url->server, url->share, NULL) < 0) {
+		printf("Failed to connect to IPC$. %s\n",
+                       smb2_get_error(smb2));
+		exit(10);
+        }
+
+        dce = dcerpc_create_context(smb2);
+        if (dce == NULL) {
+		printf("Failed to create dce context. %s\n",
+                       smb2_get_error(smb2));
+		exit(10);
+        }
+
+        for (i = 0; dcerpc_services[i].name; i++) {
+                service = &dcerpc_services[i];
+                if (!strcmp(service->name, url->path)) {
+                        break;
+                }
+        }
+        if (service->name == NULL) {
+                printf("Could not find a service with the name %s\n", url->path);
+                exit(10);
+        }
+        
+        if (dcerpc_connect_context_async(dce, url->path, service->interface,
+                       co_cb, NULL) != 0) {
+		printf("Failed to connect dce context. %s\n",
+                       smb2_get_error(smb2));
+		exit(10);
+        }
+
+        while (!is_finished) {
+		pfd.fd = smb2_get_fd(smb2);
+		pfd.events = smb2_which_events(smb2);
+
+		if (poll(&pfd, 1, 1000) < 0) {
+			printf("Poll failed");
+			exit(10);
+		}
+                if (pfd.revents == 0) {
+                        continue;
+                }
+		if (smb2_service(smb2, pfd.revents) < 0) {
+			printf("smb2_service failed with : %s\n",
+                               smb2_get_error(smb2));
+			break;
+		}
+	}
+
+        dcerpc_destroy_context(dce);
+        smb2_disconnect_share(smb2);
+        smb2_destroy_url(url);
+        smb2_destroy_context(smb2);
+        
+	return 0;
+}

package/darwin_arm64/third-party/libsmb2/source/examples/picow/CMakeLists.txt

@@ -0,0 +1,72 @@
+cmake_minimum_required(VERSION 3.24)
+
+# Some user configuration needed below
+
+# Get the Pico SDK from https://github.com/raspberrypi/pico-sdk.git tested on TAG 1.4.0
+# Get FreeRTOS from https://github.com/FreeRTOS/FreeRTOS-Kernel.git tested on TAG V10.5.0
+# Replace the /path/to's below with appropriate paths
+# Something like /home/me/dve/github/pico_sdk, but wherever you put the pico-sdk or freertos-kernel
+set(PICO_SDK_PATH /path/to/pick-sdk) 
+set(FREERTOS_KERNEL_PATH /path/to/freertos-kernel)
+set(LIBSMB2_PATH ${CMAKE_CURRENT_LIST_DIR}/../..)
+
+# Replace with the name of your WiFi (SSID) and the password to join that WiFi
+set(WIFI_SSID ssid_name)
+set(WIFI_PASSWORD wifi_name)
+
+# Put in the URL of the server/share you want to see the directory of
+set(SMB2_URL smb://myserver.lan/myshare)
+
+# No other configuration needed, below this
+# Name the project and prepare it to be a pico_w project, using FreeRTOS and lwip
+set(PROJECT_NAME libsmb2-picow-ls)
+set(PICO_BOARD pico_w)
+include(${PICO_SDK_PATH}/pico_sdk_init.cmake)
+include(${FREERTOS_KERNEL_PATH}/portable/ThirdParty/GCC/RP2040/FreeRTOS_Kernel_import.cmake)
+project(${PROJECT_NAME} C CXX ASM)
+pico_sdk_init()
+
+# Add a couple of definitions that all projects/libraries can/should use
+add_definitions(-DPICO_PLATFORM=${PICO_PLATFORM})
+add_definitions(-DHAVE_CONFIG_H)
+
+
+# Build libsmb2 as a library
+add_subdirectory(${LIBSMB2_PATH} libsmb2)
+
+# The example
+set(PROJECT_NAME smb2-ls-sync)
+project(${PROJECT_NAME} C CXX ASM)
+
+# Application, including in the FreeRTOS-Kernel
+add_executable(${PROJECT_NAME} main.cpp)
+
+# Build the app
+include_directories(
+        ${CMAKE_CURRENT_LIST_DIR}
+        ${FREERTOS_KERNEL_PATH}/include
+        ${LIBSMB2_PATH}/include
+        ${LIBSMB2_PATH}/include/smb2
+        ${LIBSMB2_PATH}/include/picow
+)
+
+pico_enable_stdio_usb(${PROJECT_NAME} 1)
+pico_enable_stdio_uart(${PROJECT_NAME} 0)
+pico_enable_stdio_semihosting(${PROJECT_NAME} ENABLED)
+
+target_compile_definitions(${PROJECT_NAME} PRIVATE
+        WIFI_SSID=\"${WIFI_SSID}\"
+        WIFI_PASSWORD=\"${WIFI_PASSWORD}\"
+        SMB2_URL=\"${SMB2_URL}\"
+        NO_SYS=0            # don't want NO_SYS (generally this would be in your lwipopts.h)
+)
+
+target_link_libraries(${PROJECT_NAME}
+        pico_cyw43_arch_lwip_sys_freertos
+        FreeRTOS-Kernel
+        pico_stdlib
+        libsmb2
+        FreeRTOS-Kernel-Heap4
+)
+
+pico_add_extra_outputs(${PROJECT_NAME})

package/darwin_arm64/third-party/libsmb2/source/examples/picow/README.md

@@ -0,0 +1,2 @@
+# Pico W sample
+This is the smb-ls-sync.c example adapted to run on a Pico W.  You will need the Pico-SDK and FreeRTOS-Kernel installed for this to work.  See the CMakeLists.txt file - there's some user configuration needed before the sample can be compiled and run.

package/darwin_arm64/third-party/libsmb2/source/examples/picow/main.cpp

@@ -0,0 +1,119 @@
+#include "pico/cyw43_arch.h"
+#include "pico/stdio.h"
+#include "pico/stdlib.h"
+#include "FreeRTOS.h"
+#include "task.h"
+#include "smb2.h"
+#include "libsmb2.h"
+
+int smb2_ls_sync(char* user_url)
+{
+        struct smb2_context *smb2;
+        struct smb2_url *url;
+        struct smb2dir *dir;
+        struct smb2dirent *ent;
+        char link[1024];
+
+	smb2 = smb2_init_context();
+        if (smb2 == NULL) {
+                printf("Failed to init context\n");
+                exit(0);
+        }
+
+        url = smb2_parse_url(smb2, user_url);
+        if (url == NULL) {
+                printf("Failed to parse url: %s\n",
+                        smb2_get_error(smb2));
+                exit(0);
+        }
+
+        smb2_set_security_mode(smb2, SMB2_NEGOTIATE_SIGNING_ENABLED);
+
+	if (smb2_connect_share(smb2, url->server, url->share, url->user) < 0) {
+		printf("smb2_connect_share failed. %s\n", smb2_get_error(smb2));
+		exit(10);
+	}
+
+	dir = smb2_opendir(smb2, url->path);
+	if (dir == NULL) {
+		printf("smb2_opendir failed. %s\n", smb2_get_error(smb2));
+		exit(10);
+	}
+
+        while ((ent = smb2_readdir(smb2, dir))) {
+                const char *type;
+                time_t t;
+
+                t = (time_t)ent->st.smb2_mtime;
+                switch (ent->st.smb2_type) {
+                case SMB2_TYPE_LINK:
+                        type = "LINK";
+                        break;
+                case SMB2_TYPE_FILE:
+                        type = "FILE";
+                        break;
+                case SMB2_TYPE_DIRECTORY:
+                        type = "DIRECTORY";
+                        break;
+                default:
+                        type = "unknown";
+                        break;
+                }
+                printf("%-20s %-9s %15u\n", ent->name, type, ent->st.smb2_size);
+                if (ent->st.smb2_type == SMB2_TYPE_LINK) {
+                        char buf[256];
+
+                        if (url->path && url->path[0]) {
+                                sprintf(link, "%s/%s", url->path, ent->name);
+                        } else {
+                                sprintf(link, "%s", ent->name);
+                        }
+                        smb2_readlink(smb2, link, buf, 256);
+                        printf("    -> [%s]\n", buf);
+                }
+        }
+
+        smb2_closedir(smb2, dir);
+        smb2_disconnect_share(smb2);
+        smb2_destroy_url(url);
+        smb2_destroy_context(smb2);
+        
+	return 0;
+}
+
+static void main_task(__unused void *params)
+{
+    if (cyw43_arch_init())
+    {
+        printf("Failed to initialise Pico W\n");
+        return;
+    }
+
+    cyw43_arch_enable_sta_mode();
+    
+    printf("Connecting to WiFi...\n");
+
+    if (cyw43_arch_wifi_connect_timeout_ms(WIFI_SSID, WIFI_PASSWORD, CYW43_AUTH_WPA2_AES_PSK, 30000))
+    {
+        printf("Failed to connect.\n");
+        return;
+    }
+
+    ip4_addr_t *address = &(cyw43_state.netif[0].ip_addr);
+    printf("Connected to %s as %d.%d.%d.%d as host %s\n", WIFI_SSID, ip4_addr1_16(address), ip4_addr2_16(address), ip4_addr3_16(address), ip4_addr4_16(address), cyw43_state.netif[0].hostname);
+
+    smb2_ls_sync(SMB2_URL);
+    vTaskDelete(NULL);
+}
+
+int main(void)
+{
+    TaskHandle_t task;
+
+    stdio_init_all();
+
+    xTaskCreate(main_task, "MainThread", configMINIMAL_STACK_SIZE, NULL, 1, &task);
+    vTaskStartScheduler();
+
+    return 0;
+}