@yanglaofish/fishtools 0.5.2 → 0.5.3

package/node_modules/ip-address/README.md

@@ -178,76 +178,76 @@ A few terms used throughout the API can be confusing if you haven't worked deepl
 
 **Static methods**
 
-- `static isValid(address: string): boolean` — Returns true if the given string is a valid IPv6 address (with optional CIDR subnet and zone identifier), false otherwise. Host bits in the subnet portion are allowed (e.g. `2001:db8::1/32` is valid); for strict network-address validation compare `correctForm()` to `startAddress().correctForm()`, or use `networkForm()`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L179)
-- `static fromBigInt(bigInt: bigint): Address6` — Convert a BigInt to a v6 address object. The value must be in the range `[0, 2**128 - 1]`; otherwise `AddressError` is thrown. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L200)
-- `static fromURL(url: string): { error: string; address: null; port: null } | { error?: undefined; address: Address6; port: number | null }` — Parse a URL (with optional bracketed host and port) into an address and port. Returns either `{ address, port }` on success or `{ error, address: null, port: null }` if the URL could not be parsed. Ports are returned as numbers (or `null` if absent or out of range). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L225)
-- `static fromAddressAndMask(address: string, mask: string): Address6` — Construct an `Address6` from an address and a hex subnet mask given as separate strings (e.g. as returned by Node's `os.networkInterfaces()`). Throws `AddressError` if the mask is non-contiguous (e.g. `ffff::ffff`). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L292)
-- `static fromAddressAndWildcardMask(address: string, wildcardMask: string): Address6` — Construct an `Address6` from an address and a Cisco-style wildcard mask given as separate strings (e.g. `::ffff:ffff:ffff:ffff` for a `/64`). The wildcard mask is the bitwise inverse of the subnet mask. Throws `AddressError` if the mask is non-contiguous. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L306)
-- `static fromWildcard(input: string): Address6` — Construct an `Address6` from a wildcard pattern with trailing `*` groups. The number of trailing wildcards determines the prefix length: each `*` represents 16 bits. `::` is expanded to zero groups (not wildcards) before evaluating trailing wildcards. Only trailing whole-group wildcards are supported. Partial-group wildcards (e.g. `2001:db8::0*`) and interior wildcards (e.g. `*::1`) throw `AddressError`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L328)
-- `static fromAddress4(address: string): Address6` — Create an IPv6-mapped address given an IPv4 address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L389)
-- `static fromArpa(arpaFormAddress: string): Address6` — Return an address from ip6.arpa form. A full 32-nibble name gives a /128 address; a shorter name, as used for a delegated reverse zone, gives the network it covers, with a subnet mask of four bits per nibble, so `fromArpa(x.reverseForm())` round-trips reverseForm for any prefix. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L409)
-- `static fromAddress4Nat64(address: string, prefix?: string): Address6` — Embed an IPv4 address into a NAT64 IPv6 address using the encoding defined by [RFC 6052](https://datatracker.ietf.org/doc/html/rfc6052). The default prefix is the well-known prefix `64:ff9b::/96`. The prefix length must be one of 32, 40, 48, 56, 64, or 96; for prefixes shorter than /64 the IPv4 octets are split around the reserved bits 64–71. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1116)
-- `static fromByteArray(bytes: number[]): Address6` — Convert a byte array to an Address6 object. Accepts unsigned bytes (0 to 255) or signed bytes (-128 to 127, as an `Int8Array` or a Java `byte[]` holds them), folding signed values to their unsigned equivalent. Throws `AddressError` unless given exactly 16 integers from -128 to 255. To convert from a Node.js `Buffer`, spread it: `Address6.fromByteArray([...buf])`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1231)
-- `static fromUnsignedByteArray(bytes: number[]): Address6` — Convert an unsigned byte array to an Address6 object. Throws `AddressError` unless given exactly 16 integers from 0 to 255. To convert from a Node.js `Buffer`, spread it: `Address6.fromUnsignedByteArray([...buf])`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1248)
+- `static isValid(address: string): boolean` — Returns true if the given string is a valid IPv6 address (with optional CIDR subnet and zone identifier), false otherwise. Host bits in the subnet portion are allowed (e.g. `2001:db8::1/32` is valid); for strict network-address validation compare `correctForm()` to `startAddress().correctForm()`, or use `networkForm()`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L182)
+- `static fromBigInt(bigInt: bigint): Address6` — Convert a BigInt to a v6 address object. The value must be in the range `[0, 2**128 - 1]`; otherwise `AddressError` is thrown. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L203)
+- `static fromURL(url: string): { error: string; address: null; port: null } | { error?: undefined; address: Address6; port: number | null }` — Parse a URL (with optional bracketed host and port) into an address and port. Returns either `{ address, port }` on success or `{ error, address: null, port: null }` if the URL could not be parsed. Ports are returned as numbers (or `null` if absent or out of range). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L228)
+- `static fromAddressAndMask(address: string, mask: string): Address6` — Construct an `Address6` from an address and a hex subnet mask given as separate strings (e.g. as returned by Node's `os.networkInterfaces()`). Throws `AddressError` if the mask is non-contiguous (e.g. `ffff::ffff`). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L295)
+- `static fromAddressAndWildcardMask(address: string, wildcardMask: string): Address6` — Construct an `Address6` from an address and a Cisco-style wildcard mask given as separate strings (e.g. `::ffff:ffff:ffff:ffff` for a `/64`). The wildcard mask is the bitwise inverse of the subnet mask. Throws `AddressError` if the mask is non-contiguous. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L309)
+- `static fromWildcard(input: string): Address6` — Construct an `Address6` from a wildcard pattern with trailing `*` groups. The number of trailing wildcards determines the prefix length: each `*` represents 16 bits. `::` is expanded to zero groups (not wildcards) before evaluating trailing wildcards. Only trailing whole-group wildcards are supported. Partial-group wildcards (e.g. `2001:db8::0*`) and interior wildcards (e.g. `*::1`) throw `AddressError`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L331)
+- `static fromAddress4(address: string): Address6` — Create an IPv6-mapped address given an IPv4 address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L392)
+- `static fromArpa(arpaFormAddress: string): Address6` — Return an address from ip6.arpa form. A full 32-nibble name gives a /128 address; a shorter name, as used for a delegated reverse zone, gives the network it covers, with a subnet mask of four bits per nibble, so `fromArpa(x.reverseForm())` round-trips reverseForm for any prefix. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L412)
+- `static fromAddress4Nat64(address: string, prefix?: string): Address6` — Embed an IPv4 address into a NAT64 IPv6 address using the encoding defined by [RFC 6052](https://datatracker.ietf.org/doc/html/rfc6052). The default prefix is the well-known prefix `64:ff9b::/96`. The prefix length must be one of 32, 40, 48, 56, 64, or 96; for prefixes shorter than /64 the IPv4 octets are split around the reserved bits 64–71. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1119)
+- `static fromByteArray(bytes: number[]): Address6` — Convert a byte array to an Address6 object. Accepts unsigned bytes (0 to 255) or signed bytes (-128 to 127, as an `Int8Array` or a Java `byte[]` holds them), folding signed values to their unsigned equivalent. Throws `AddressError` unless given exactly 16 integers from -128 to 255. To convert from a Node.js `Buffer`, spread it: `Address6.fromByteArray([...buf])`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1234)
+- `static fromUnsignedByteArray(bytes: number[]): Address6` — Convert an unsigned byte array to an Address6 object. Throws `AddressError` unless given exactly 16 integers from 0 to 255. To convert from a Node.js `Buffer`, spread it: `Address6.fromUnsignedByteArray([...buf])`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1251)
 
 **Instance methods**
 
-- `microsoftTranscription(): string` — Return the Microsoft UNC transcription of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L434)
-- `mask(mask?: number): string` — Return the first n bits of the address, defaulting to the subnet mask [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L443)
-- `possibleSubnets(subnetSize?: number): string` — Return the number of possible subnets of a given size in the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L453)
-- `startAddress(): Address6` — The first address in the range given by this address' subnet Often referred to as the Network Address. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L478)
-- `startAddressExclusive(): Address6` — The first host address in the range given by this address's subnet ie the first address after the Network Address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L487)
-- `endAddress(): Address6` — The last address in the range given by this address's subnet. IPv6 has no broadcast address, so this is an ordinary assignable address (in a 64-bit-interface-identifier subnet it falls inside the reserved subnet-anycast block of [RFC 2526](https://datatracker.ietf.org/doc/html/rfc2526)). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L507)
-- `endAddressExclusive(): Address6` — The address one before endAddress. This is the IPv6 counterpart of the IPv4 method that skips the broadcast address; IPv6 has no broadcast, so it drops exactly one address and does not model the 128 reserved subnet-anycast identifiers of [RFC 2526](https://datatracker.ietf.org/doc/html/rfc2526). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L518)
-- `offset(n: number | bigint): Address6` — Returns the address `n` addresses after this one (or before, when `n` is negative), keeping this address's subnet mask. Throws `AddressError` when the result would fall outside the IPv6 address space or `n` is not an integer. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L533)
-- `nextNetwork(): Address6` — Returns the network that follows this address's network: the address after endAddress, with the same subnet mask. Throws `AddressError` when this network is the last one in the address space. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L547)
-- `subnetMaskAddress(): Address6` — The hex form of the subnet mask, e.g. `ffff:ffff:ffff:ffff::` for a `/64`. Returns an `Address6`; call `.correctForm()` for the string. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L562)
-- `wildcardMask(): Address6` — The Cisco-style wildcard mask, e.g. `::ffff:ffff:ffff:ffff` for a `/64`. This is the bitwise inverse of `subnetMaskAddress()`. Returns an `Address6`; call `.correctForm()` for the string. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L574)
-- `networkForm(): string` — The network address in CIDR string form, e.g. `2001:db8::/32` for `2001:db8::1/32`. For an address with no explicit subnet the prefix is `/128`, e.g. `networkForm()` on `2001:db8::1` returns `2001:db8::1/128`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L587)
-- `getScope(): string` — Return the scope of the address. The 4-bit scope field ([RFC 4291 §2.7](https://datatracker.ietf.org/doc/html/rfc4291#section-2.7)) is only defined for multicast addresses; for unicast addresses the scope is derived from the address type per [RFC 4007 §6](https://datatracker.ietf.org/doc/html/rfc4007#section-6). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L599)
-- `getType(): string` — Return the type of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L626)
-- `getBits(start: number, end: number): bigint` — Return the bits in the given range as a BigInt [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L641)
-- `getBitsBase2(start: number, end: number): string` — Return the bits in the given range as a base-2 string [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L649)
-- `getBitsBase16(start: number, end: number): string` — Return the bits in the given range as a base-16 string [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L657)
-- `getBitsPastSubnet(): string` — Return the bits that are set past the subnet mask length [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L673)
-- `reverseForm(options?: ReverseFormOptions): string` — Return the reversed ip6.arpa form of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L683)
-- `correctForm(): string` — Returns the address in correct form, per [RFC 5952](https://datatracker.ietf.org/doc/html/rfc5952): leading zeros stripped, the longest run of zero groups collapsed to `::`, and hex digits lowercased (e.g. `2001:db8::1`). This is the recommended form for display. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L718)
-- `binaryZeroPad(): string` — Return a zero-padded base-2 string representation of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L780)
-- `parse4in6(address: string): string` — Parses a v4-in-v6 string (e.g. `::ffff:192.168.0.1`) by extracting the trailing IPv4 address into `this.address4` / `this.parsedAddress4` and returning the address with the v4 portion converted to two v6 groups. Used internally by `parse()`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L794)
-- `parse(address: string): string[]` — Parses an IPv6 address string into its 8 hexadecimal groups (expanding any `::` elision and any trailing v4-in-v6 portion) and stores the result on `this.parsedAddress`. Called automatically by the constructor; you typically don't need to call it directly. Throws `AddressError` if the input is malformed. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L851)
-- `canonicalForm(): string` — Returns the canonical (fully expanded) form of the address: all 8 groups, each padded to 4 hex digits, with no `::` collapsing (e.g. `2001:0db8:0000:0000:0000:0000:0000:0001`). Useful for sorting and byte-exact comparison. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L931)
-- `decimal(): string` — Return the decimal form of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L939)
-- `bigInt(): bigint` — Return the address as a BigInt [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L947)
-- `to4(): Address4` — Return the last two groups of this address as an IPv4 address string. If this address carries a CIDR prefix that covers the trailing 32 bits (i.e. `subnetMask >= 96`), the resulting `Address4` inherits the corresponding v4 prefix (`subnetMask - 96`); otherwise it defaults to `/32`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L962)
-- `to4in6(): string` — Return the v4-in-v6 form of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L986)
-- `inspectTeredo(): TeredoProperties` — Decodes the Teredo tunneling fields embedded in this address. Returns the Teredo prefix, server IPv4, client IPv4, raw flag bits, cone-NAT flag, UDP port, and Microsoft-format flag breakdown (reserved, universal/local, group/individual, nonce). Only meaningful for addresses in `2001::/32`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1007)
-- `inspect6to4(): SixToFourProperties` — Decodes the 6to4 tunneling fields embedded in this address. Returns the 6to4 prefix and the embedded IPv4 gateway address. Only meaningful for addresses in `2002::/16`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1070)
-- `to6to4(): Address6 | null` — Return a v6 6to4 address from a v6 v4inv6 address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1090)
-- `toAddress4Nat64(prefix?: string): Address4 | null` — Extract the embedded IPv4 address from a NAT64 IPv6 address using the encoding defined by [RFC 6052](https://datatracker.ietf.org/doc/html/rfc6052). The default prefix is the well-known prefix `64:ff9b::/96`. Returns `null` if this address is not contained within the given prefix. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1159)
-- `toByteArray(): number[]` — Return a byte array. To get a Node.js `Buffer`, wrap the result: `Buffer.from(address.toByteArray())`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1194)
-- `toUnsignedByteArray(): number[]` — Return an unsigned byte array. To get a Node.js `Buffer`, wrap the result: `Buffer.from(address.toUnsignedByteArray())`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1213)
-- `isCanonical(): boolean` — Returns true if the address is in the canonical form, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1295)
-- `isLinkLocal(): boolean` — Returns true if the address is a link-local unicast address in `fe80::/10` ([RFC 4291 §2.4](https://datatracker.ietf.org/doc/html/rfc4291#section-2.4)) or an IPv4-mapped / NAT64 address whose embedded IPv4 address is link-local (`169.254.0.0/16`, e.g. `::ffff:169.254.169.254`), false otherwise. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1306)
-- `isMulticast(): boolean` — Returns true if the address is a multicast address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1319)
-- `is4(): boolean` — Returns true if the address was written in v4-in-v6 dotted-quad notation (e.g. `::ffff:127.0.0.1`), false otherwise. This is a notation-level flag and does not reflect whether the address bits lie in the IPv4-mapped (`::ffff:0:0/96`) subnet — for that, see isMapped4. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1336)
-- `isMapped4(): boolean` — Returns true if the address is an IPv4-mapped IPv6 address in `::ffff:0:0/96` ([RFC 4291 §2.5.5.2](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.5.2)), false otherwise. Unlike is4, this checks the underlying address bits rather than the textual notation, so `::ffff:127.0.0.1` and `::ffff:7f00:1` both return true. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1348)
-- `embeddedIPv4(): Address4 | null` — If this address embeds a routable IPv4 address — i.e. it is IPv4-mapped (`::ffff:0:0/96`) or sits in the NAT64 well-known prefix (`64:ff9b::/96`, [RFC 6052](https://datatracker.ietf.org/doc/html/rfc6052)) — return that embedded address as an Address4; otherwise return null. The special-property checks (`isLoopback`, `isLinkLocal`, `isMulticast`, `isUnspecified`, `isPrivate`, `isCGNAT`, `isBroadcast`) call this first and delegate to the embedded Address4 when present, so a literal such as `::ffff:127.0.0.1` is classified by what it actually reaches (loopback) rather than by its IPv6 wrapper (which `getType()` reports as IPv4-mapped). This matters wherever the checks back a trust-boundary decision (e.g. an SSRF allow/deny filter): without normalization, `::ffff:10.0.0.1`, `::ffff:169.254.169.254`, `64:ff9b::7f00:1`, etc. would all read as non-internal. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1369)
-- `isTeredo(): boolean` — Returns true if the address is a Teredo address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1381)
-- `is6to4(): boolean` — Returns true if the address is a 6to4 address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1389)
-- `isLoopback(): boolean` — Returns true if the address is a loopback address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1397)
-- `isULA(): boolean` — Returns true if the address is a Unique Local Address in `fc00::/7` ([RFC 4193](https://datatracker.ietf.org/doc/html/rfc4193)). ULAs are the IPv6 equivalent of IPv4 [RFC 1918](https://datatracker.ietf.org/doc/html/rfc1918) private addresses. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1410)
-- `isPrivate(): boolean` — Returns true if the address is private, i.e. a Unique Local Address in `fc00::/7` ([RFC 4193](https://datatracker.ietf.org/doc/html/rfc4193)), an address in the NAT64 local-use range `64:ff9b:1::/48` ([RFC 8215](https://datatracker.ietf.org/doc/html/rfc8215)), or an IPv4-mapped / NAT64 well-known address whose embedded IPv4 address is in one of the [RFC 1918](https://datatracker.ietf.org/doc/html/rfc1918) private ranges (e.g. `::ffff:10.0.0.1`). This is the IPv6 counterpart to Address4.isPrivate; use it instead of isULA when you need to catch mapped RFC 1918 addresses as well as native ULAs. The local-use NAT64 range is reported private as a whole rather than by its embedded IPv4 address: an operator may carve a prefix of any RFC 6052 length out of `64:ff9b:1::/48`, so the same bits decode to different IPv4 addresses under different deployments and no single decoding is correct. Use toAddress4Nat64 with the deployment's prefix to decode one. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1432)
-- `isCGNAT(): boolean` — Returns true if the address is an IPv4-mapped / NAT64 address whose embedded IPv4 address is in the carrier-grade NAT range `100.64.0.0/10` ([RFC 6598](https://datatracker.ietf.org/doc/html/rfc6598)), false otherwise. There is no native IPv6 CGNAT range, so this only ever returns true for an embedded IPv4 address (e.g. `::ffff:100.64.0.1`). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1449)
-- `isBroadcast(): boolean` — Returns true if the address is an IPv4-mapped / NAT64 address whose embedded IPv4 address is the limited broadcast address `255.255.255.255` ([RFC 919](https://datatracker.ietf.org/doc/html/rfc919)), false otherwise. There is no IPv6 broadcast, so this only ever returns true for an embedded IPv4 address (e.g. `::ffff:255.255.255.255`). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1466)
-- `isUnspecified(): boolean` — Returns true if the address is the unspecified address `::`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1479)
-- `isDocumentation(): boolean` — Returns true if the address is in the documentation prefix `2001:db8::/32` ([RFC 3849](https://datatracker.ietf.org/doc/html/rfc3849)). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1492)
-- `isBenchmarking(): boolean` — Returns true if the address is in the benchmarking range `2001:2::/48` ([RFC 5180](https://datatracker.ietf.org/doc/html/rfc5180)) or is an IPv4-mapped / NAT64 address whose embedded IPv4 address is in `198.18.0.0/15`, false otherwise. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1503)
-- `isGlobal(): boolean` — Returns true if the address is globally reachable: inside the global unicast allocation `2000::/3` (the only range the [IANA IPv6 Address Space Registry](https://www.iana.org/assignments/ipv6-address-space/) assigns for global unicast; everything else is reserved, ULA, link-local, or multicast) and not in any block the [IANA IPv6 Special-Purpose Address Registry](https://www.iana.org/assignments/iana-ipv6-special-registry/) marks as not globally reachable. An IPv4-mapped or NAT64 well-known address answers for its embedded IPv4 address, so `::ffff:10.0.0.1` and `64:ff9b::7f00:1` are not global. Teredo (`2001::/32`) and 6to4 (`2002::/16`) are not global either: the registry lists them as N/A and a packet to one needs a relay. This covers everything the individual classifiers name and the blocks they do not: the discard-only prefix `100::/64`, the IETF protocol assignments in `2001::/23`, the deprecated site-local `fec0::/10` and IPv4-compatible `::/96` ranges, and unallocated space such as `4000::/3`. It is the single predicate to use where a request must not reach an internal or special-purpose destination; see SECURITY.md. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1532)
-- `href(optionalPort?: string | number): string` — Returns the address as an HTTP URL with the host bracketed, e.g. `http://[2001:db8::1]/`. If `optionalPort` is provided it is appended, e.g. `http://[2001:db8::1]:8080/`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1551)
-- `link(options?: { className?: string; prefix?: string; v4?: boolean }): string` — Returns an HTML `<a>` element whose `href` encodes the address in a URL hash fragment (default prefix `/#address=`). Useful for linking between pages of an address-inspector UI. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1569)
-- `group(): string` — Groups an address. Returns an HTML fragment: each group is wrapped in a `<span>` carrying the group classes an address-inspector UI hovers on. The address content is HTML-escaped; anything you concatenate around it is your responsibility. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1614)
-- `regularExpressionString(substringSearch?: boolean): string` — Generate a regular expression string that can be used to find or validate all variations of this address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1666)
-- `regularExpression(substringSearch?: boolean): RegExp` — Generate a regular expression that can be used to find or validate all variations of this address. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1720)
+- `microsoftTranscription(): string` — Return the Microsoft UNC transcription of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L437)
+- `mask(mask?: number): string` — Return the first n bits of the address, defaulting to the subnet mask [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L446)
+- `possibleSubnets(subnetSize?: number): string` — Return the number of possible subnets of a given size in the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L456)
+- `startAddress(): Address6` — The first address in the range given by this address' subnet Often referred to as the Network Address. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L481)
+- `startAddressExclusive(): Address6` — The first host address in the range given by this address's subnet ie the first address after the Network Address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L490)
+- `endAddress(): Address6` — The last address in the range given by this address's subnet. IPv6 has no broadcast address, so this is an ordinary assignable address (in a 64-bit-interface-identifier subnet it falls inside the reserved subnet-anycast block of [RFC 2526](https://datatracker.ietf.org/doc/html/rfc2526)). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L510)
+- `endAddressExclusive(): Address6` — The address one before endAddress. This is the IPv6 counterpart of the IPv4 method that skips the broadcast address; IPv6 has no broadcast, so it drops exactly one address and does not model the 128 reserved subnet-anycast identifiers of [RFC 2526](https://datatracker.ietf.org/doc/html/rfc2526). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L521)
+- `offset(n: number | bigint): Address6` — Returns the address `n` addresses after this one (or before, when `n` is negative), keeping this address's subnet mask. Throws `AddressError` when the result would fall outside the IPv6 address space or `n` is not an integer. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L536)
+- `nextNetwork(): Address6` — Returns the network that follows this address's network: the address after endAddress, with the same subnet mask. Throws `AddressError` when this network is the last one in the address space. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L550)
+- `subnetMaskAddress(): Address6` — The hex form of the subnet mask, e.g. `ffff:ffff:ffff:ffff::` for a `/64`. Returns an `Address6`; call `.correctForm()` for the string. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L565)
+- `wildcardMask(): Address6` — The Cisco-style wildcard mask, e.g. `::ffff:ffff:ffff:ffff` for a `/64`. This is the bitwise inverse of `subnetMaskAddress()`. Returns an `Address6`; call `.correctForm()` for the string. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L577)
+- `networkForm(): string` — The network address in CIDR string form, e.g. `2001:db8::/32` for `2001:db8::1/32`. For an address with no explicit subnet the prefix is `/128`, e.g. `networkForm()` on `2001:db8::1` returns `2001:db8::1/128`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L590)
+- `getScope(): string` — Return the scope of the address. The 4-bit scope field ([RFC 4291 §2.7](https://datatracker.ietf.org/doc/html/rfc4291#section-2.7)) is only defined for multicast addresses; for unicast addresses the scope is derived from the address type per [RFC 4007 §6](https://datatracker.ietf.org/doc/html/rfc4007#section-6). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L602)
+- `getType(): string` — Return the type of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L629)
+- `getBits(start: number, end: number): bigint` — Return the bits in the given range as a BigInt [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L644)
+- `getBitsBase2(start: number, end: number): string` — Return the bits in the given range as a base-2 string [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L652)
+- `getBitsBase16(start: number, end: number): string` — Return the bits in the given range as a base-16 string [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L660)
+- `getBitsPastSubnet(): string` — Return the bits that are set past the subnet mask length [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L676)
+- `reverseForm(options?: ReverseFormOptions): string` — Return the reversed ip6.arpa form of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L686)
+- `correctForm(): string` — Returns the address in correct form, per [RFC 5952](https://datatracker.ietf.org/doc/html/rfc5952): leading zeros stripped, the longest run of zero groups collapsed to `::`, and hex digits lowercased (e.g. `2001:db8::1`). This is the recommended form for display. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L721)
+- `binaryZeroPad(): string` — Return a zero-padded base-2 string representation of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L783)
+- `parse4in6(address: string): string` — Parses a v4-in-v6 string (e.g. `::ffff:192.168.0.1`) by extracting the trailing IPv4 address into `this.address4` / `this.parsedAddress4` and returning the address with the v4 portion converted to two v6 groups. Used internally by `parse()`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L797)
+- `parse(address: string): string[]` — Parses an IPv6 address string into its 8 hexadecimal groups (expanding any `::` elision and any trailing v4-in-v6 portion) and stores the result on `this.parsedAddress`. Called automatically by the constructor; you typically don't need to call it directly. Throws `AddressError` if the input is malformed. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L854)
+- `canonicalForm(): string` — Returns the canonical (fully expanded) form of the address: all 8 groups, each padded to 4 hex digits, with no `::` collapsing (e.g. `2001:0db8:0000:0000:0000:0000:0000:0001`). Useful for sorting and byte-exact comparison. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L934)
+- `decimal(): string` — Return the decimal form of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L942)
+- `bigInt(): bigint` — Return the address as a BigInt [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L950)
+- `to4(): Address4` — Return the last two groups of this address as an IPv4 address string. If this address carries a CIDR prefix that covers the trailing 32 bits (i.e. `subnetMask >= 96`), the resulting `Address4` inherits the corresponding v4 prefix (`subnetMask - 96`); otherwise it defaults to `/32`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L965)
+- `to4in6(): string` — Return the v4-in-v6 form of the address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L989)
+- `inspectTeredo(): TeredoProperties` — Decodes the Teredo tunneling fields embedded in this address. Returns the Teredo prefix, server IPv4, client IPv4, raw flag bits, cone-NAT flag, UDP port, and Microsoft-format flag breakdown (reserved, universal/local, group/individual, nonce). Only meaningful for addresses in `2001::/32`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1010)
+- `inspect6to4(): SixToFourProperties` — Decodes the 6to4 tunneling fields embedded in this address. Returns the 6to4 prefix and the embedded IPv4 gateway address. Only meaningful for addresses in `2002::/16`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1073)
+- `to6to4(): Address6 | null` — Return a v6 6to4 address from a v6 v4inv6 address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1093)
+- `toAddress4Nat64(prefix?: string): Address4 | null` — Extract the embedded IPv4 address from a NAT64 IPv6 address using the encoding defined by [RFC 6052](https://datatracker.ietf.org/doc/html/rfc6052). The default prefix is the well-known prefix `64:ff9b::/96`. Returns `null` if this address is not contained within the given prefix. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1162)
+- `toByteArray(): number[]` — Return a byte array. To get a Node.js `Buffer`, wrap the result: `Buffer.from(address.toByteArray())`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1197)
+- `toUnsignedByteArray(): number[]` — Return an unsigned byte array. To get a Node.js `Buffer`, wrap the result: `Buffer.from(address.toUnsignedByteArray())`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1216)
+- `isCanonical(): boolean` — Returns true if the address is in the canonical form, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1298)
+- `isLinkLocal(): boolean` — Returns true if the address is a link-local unicast address in `fe80::/10` ([RFC 4291 §2.4](https://datatracker.ietf.org/doc/html/rfc4291#section-2.4)) or an IPv4-mapped / NAT64 address whose embedded IPv4 address is link-local (`169.254.0.0/16`, e.g. `::ffff:169.254.169.254`), false otherwise. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1309)
+- `isMulticast(): boolean` — Returns true if the address is a multicast address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1322)
+- `is4(): boolean` — Returns true if the address was written in v4-in-v6 dotted-quad notation (e.g. `::ffff:127.0.0.1`), false otherwise. This is a notation-level flag and does not reflect whether the address bits lie in the IPv4-mapped (`::ffff:0:0/96`) subnet — for that, see isMapped4. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1339)
+- `isMapped4(): boolean` — Returns true if the address is an IPv4-mapped IPv6 address in `::ffff:0:0/96` ([RFC 4291 §2.5.5.2](https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.5.2)), false otherwise. Unlike is4, this checks the underlying address bits rather than the textual notation, so `::ffff:127.0.0.1` and `::ffff:7f00:1` both return true. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1351)
+- `embeddedIPv4(): Address4 | null` — If this address embeds a routable IPv4 address — i.e. it is IPv4-mapped (`::ffff:0:0/96`) or sits in the NAT64 well-known prefix (`64:ff9b::/96`, [RFC 6052](https://datatracker.ietf.org/doc/html/rfc6052)) — return that embedded address as an Address4; otherwise return null. The special-property checks (`isLoopback`, `isLinkLocal`, `isMulticast`, `isUnspecified`, `isPrivate`, `isCGNAT`, `isBroadcast`) call this first and delegate to the embedded Address4 when present, so a literal such as `::ffff:127.0.0.1` is classified by what it actually reaches (loopback) rather than by its IPv6 wrapper (which `getType()` reports as IPv4-mapped). This matters wherever the checks back a trust-boundary decision (e.g. an SSRF allow/deny filter): without normalization, `::ffff:10.0.0.1`, `::ffff:169.254.169.254`, `64:ff9b::7f00:1`, etc. would all read as non-internal. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1372)
+- `isTeredo(): boolean` — Returns true if the address is a Teredo address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1384)
+- `is6to4(): boolean` — Returns true if the address is a 6to4 address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1392)
+- `isLoopback(): boolean` — Returns true if the address is a loopback address, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1400)
+- `isULA(): boolean` — Returns true if the address is a Unique Local Address in `fc00::/7` ([RFC 4193](https://datatracker.ietf.org/doc/html/rfc4193)). ULAs are the IPv6 equivalent of IPv4 [RFC 1918](https://datatracker.ietf.org/doc/html/rfc1918) private addresses. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1413)
+- `isPrivate(): boolean` — Returns true if the address is private, i.e. a Unique Local Address in `fc00::/7` ([RFC 4193](https://datatracker.ietf.org/doc/html/rfc4193)), an address in the NAT64 local-use range `64:ff9b:1::/48` ([RFC 8215](https://datatracker.ietf.org/doc/html/rfc8215)), or an IPv4-mapped / NAT64 well-known address whose embedded IPv4 address is in one of the [RFC 1918](https://datatracker.ietf.org/doc/html/rfc1918) private ranges (e.g. `::ffff:10.0.0.1`). This is the IPv6 counterpart to Address4.isPrivate; use it instead of isULA when you need to catch mapped RFC 1918 addresses as well as native ULAs. The local-use NAT64 range is reported private as a whole rather than by its embedded IPv4 address: an operator may carve a prefix of any RFC 6052 length out of `64:ff9b:1::/48`, so the same bits decode to different IPv4 addresses under different deployments and no single decoding is correct. Use toAddress4Nat64 with the deployment's prefix to decode one. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1435)
+- `isCGNAT(): boolean` — Returns true if the address is an IPv4-mapped / NAT64 address whose embedded IPv4 address is in the carrier-grade NAT range `100.64.0.0/10` ([RFC 6598](https://datatracker.ietf.org/doc/html/rfc6598)), false otherwise. There is no native IPv6 CGNAT range, so this only ever returns true for an embedded IPv4 address (e.g. `::ffff:100.64.0.1`). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1452)
+- `isBroadcast(): boolean` — Returns true if the address is an IPv4-mapped / NAT64 address whose embedded IPv4 address is the limited broadcast address `255.255.255.255` ([RFC 919](https://datatracker.ietf.org/doc/html/rfc919)), false otherwise. There is no IPv6 broadcast, so this only ever returns true for an embedded IPv4 address (e.g. `::ffff:255.255.255.255`). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1469)
+- `isUnspecified(): boolean` — Returns true if the address is the unspecified address `::`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1482)
+- `isDocumentation(): boolean` — Returns true if the address is in the documentation prefix `2001:db8::/32` ([RFC 3849](https://datatracker.ietf.org/doc/html/rfc3849)). [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1495)
+- `isBenchmarking(): boolean` — Returns true if the address is in the benchmarking range `2001:2::/48` ([RFC 5180](https://datatracker.ietf.org/doc/html/rfc5180)) or is an IPv4-mapped / NAT64 address whose embedded IPv4 address is in `198.18.0.0/15`, false otherwise. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1506)
+- `isGlobal(): boolean` — Returns true if the address is globally reachable: inside the global unicast allocation `2000::/3` (the only range the [IANA IPv6 Address Space Registry](https://www.iana.org/assignments/ipv6-address-space/) assigns for global unicast; everything else is reserved, ULA, link-local, or multicast) and not in any block the [IANA IPv6 Special-Purpose Address Registry](https://www.iana.org/assignments/iana-ipv6-special-registry/) marks as not globally reachable. An IPv4-mapped or NAT64 well-known address answers for its embedded IPv4 address, so `::ffff:10.0.0.1` and `64:ff9b::7f00:1` are not global. Teredo (`2001::/32`) and 6to4 (`2002::/16`) are not global either: the registry lists them as N/A and a packet to one needs a relay. This covers everything the individual classifiers name and the blocks they do not: the discard-only prefix `100::/64`, the IETF protocol assignments in `2001::/23`, the deprecated site-local `fec0::/10` and IPv4-compatible `::/96` ranges, and unallocated space such as `4000::/3`. It is the single predicate to use where a request must not reach an internal or special-purpose destination; see SECURITY.md. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1535)
+- `href(optionalPort?: string | number): string` — Returns the address as an HTTP URL with the host bracketed, e.g. `http://[2001:db8::1]/`. If `optionalPort` is provided it is appended, e.g. `http://[2001:db8::1]:8080/`. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1554)
+- `link(options?: { className?: string; prefix?: string; v4?: boolean }): string` — Returns an HTML `<a>` element whose `href` encodes the address in a URL hash fragment (default prefix `/#address=`). Useful for linking between pages of an address-inspector UI. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1572)
+- `group(): string` — Groups an address. Returns an HTML fragment: each group is wrapped in a `<span>` carrying the group classes an address-inspector UI hovers on. The address content is HTML-escaped; anything you concatenate around it is your responsibility. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1617)
+- `regularExpressionString(substringSearch?: boolean): string` — Generate a regular expression string that can be used to find or validate all variations of this address [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1669)
+- `regularExpression(substringSearch?: boolean): RegExp` — Generate a regular expression that can be used to find or validate all variations of this address. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1723)
 
 **Properties**
 
@@ -265,9 +265,9 @@ A few terms used throughout the API can be confusing if you haven't worked deepl
 - `subnetMask: number` — [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L108)
 - `v4: boolean` — [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L109)
 - `zone: string` — [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L110)
-- `isInSubnet: (address: Address4 | Address6) => boolean` — Returns true if the given address is in the subnet of the current address. An `Address4` is never in the subnet of an `Address6`; convert with `Address6.fromAddress4()` or `to4()` to compare across families. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1271)
-- `isHostInSubnet: (address: Address4 | Address6) => boolean` — Returns true if this address's host bits fall inside the given subnet, ignoring this address's own subnet mask. Prefer this over `isInSubnet` when classifying a single address, so the answer doesn't change with the CIDR suffix the caller happened to write — notably when the address came from untrusted input and the result backs a trust-boundary decision. An `Address4` is never in the subnet of an `Address6`; convert with `Address6.fromAddress4()` or `to4()` to compare across families. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1283)
-- `isCorrect: () => boolean` — Returns true if the address is correct, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1289)
+- `isInSubnet: (address: Address4 | Address6) => boolean` — Returns true if the given address is in the subnet of the current address. An `Address4` is never in the subnet of an `Address6`; convert with `Address6.fromAddress4()` or `to4()` to compare across families. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1274)
+- `isHostInSubnet: (address: Address4 | Address6) => boolean` — Returns true if this address's host bits fall inside the given subnet, ignoring this address's own subnet mask. Prefer this over `isInSubnet` when classifying a single address, so the answer doesn't change with the CIDR suffix the caller happened to write — notably when the address came from untrusted input and the result backs a trust-boundary decision. An `Address4` is never in the subnet of an `Address6`; convert with `Address6.fromAddress4()` or `to4()` to compare across families. [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1286)
+- `isCorrect: () => boolean` — Returns true if the address is correct, false otherwise [src](https://github.com/beaugunderson/ip-address/blob/main/src/ipv6.ts#L1292)
 
 </details>
 

package/node_modules/ip-address/dist/ipv6.js

@@ -139,10 +139,13 @@ class Address6 {
         if (/\//.test(address)) {
             throw new address_error_1.AddressError('Invalid subnet mask.');
         }
-        const zone = constants6.RE_ZONE_STRING.exec(address);
-        if (zone) {
-            this.zone = zone[0];
-            address = address.replace(constants6.RE_ZONE_STRING, '');
+        // A zone runs from the first `%` to the end of the input and holds no line
+        // terminator. Finding it by index reads the input once, where matching
+        // RE_ZONE_STRING retries from every `%` that a line terminator disqualifies.
+        const zoneStart = address.indexOf('%');
+        if (zoneStart !== -1 && /^.*$/.test(address.slice(zoneStart))) {
+            this.zone = address.slice(zoneStart);
+            address = address.slice(0, zoneStart);
         }
         // The longest well-formed address is all but the last two groups written
         // as four hex digits with their colons, then a 15-character dotted quad: