@ya-modbus/driver-sdm630 0.0.0-stage → 0.0.0

package/README.md

@@ -1,3 +1,153 @@
-# Temporary Holding Version
+# @ya-modbus/driver-sdm630
 
-This version is a temporary placeholder for this package. An operational version to replace this has been submitted for review and is awaiting a staged release.
+Eastron SDM630 3-phase energy meter driver for ya-modbus.
+
+## Device Information
+
+- **Manufacturer**: Eastron
+- **Model**: SDM630 (3 phases + N, DIN rail, RS-485)
+- **Communication**: Modbus RTU, input registers (function code 04), float32 big-endian, 2 registers per value
+- **Default Settings**:
+  - Address: 1
+  - Baud rate: 9600
+  - Parity: None
+  - Stop bits: 1
+  - Data bits: 8
+- **Supported Settings**: baud rate 2400, 4800, 9600, 19200 or 38400; no parity with 1 or 2 stop bits, or even/odd parity with 1 stop bit; address 1 to 247
+
+## Installation
+
+```bash
+npm install @ya-modbus/driver-sdm630
+```
+
+## Usage
+
+```typescript
+import { createDriver, DEFAULT_CONFIG } from '@ya-modbus/driver-sdm630'
+import { createRTUTransport } from '@ya-modbus/transport'
+
+const transport = await createRTUTransport({
+  port: '/dev/ttyUSB0',
+  baudRate: DEFAULT_CONFIG.baudRate,
+  parity: DEFAULT_CONFIG.parity,
+  dataBits: DEFAULT_CONFIG.dataBits,
+  stopBits: DEFAULT_CONFIG.stopBits,
+  slaveId: DEFAULT_CONFIG.defaultAddress,
+})
+
+const driver = await createDriver({ transport, slaveId: DEFAULT_CONFIG.defaultAddress })
+
+const values = await driver.readDataPoints(['voltage_l1', 'active_power_total', 'frequency'])
+console.log(values)
+```
+
+## Data Points
+
+All data points are read-only and are read on every poll. Where the unit column has `-`, the value has no unit or `driver-types` has no unit for it: phase angles are in degrees and total apparent energy is in kVAh.
+
+| ID                           | Register | Unit  | Description                                                                    |
+| ---------------------------- | -------- | ----- | ------------------------------------------------------------------------------ |
+| `voltage_l1`                 | 0x00     | V     | L1 voltage                                                                     |
+| `voltage_l2`                 | 0x02     | V     | L2 voltage                                                                     |
+| `voltage_l3`                 | 0x04     | V     | L3 voltage                                                                     |
+| `current_l1`                 | 0x06     | A     | L1 current                                                                     |
+| `current_l2`                 | 0x08     | A     | L2 current                                                                     |
+| `current_l3`                 | 0x0A     | A     | L3 current                                                                     |
+| `active_power_l1`            | 0x0C     | W     | L1 active power                                                                |
+| `active_power_l2`            | 0x0E     | W     | L2 active power                                                                |
+| `active_power_l3`            | 0x10     | W     | L3 active power                                                                |
+| `apparent_power_l1`          | 0x12     | VA    | L1 apparent power                                                              |
+| `apparent_power_l2`          | 0x14     | VA    | L2 apparent power                                                              |
+| `apparent_power_l3`          | 0x16     | VA    | L3 apparent power                                                              |
+| `reactive_power_l1`          | 0x18     | VAr   | L1 reactive power                                                              |
+| `reactive_power_l2`          | 0x1A     | VAr   | L2 reactive power                                                              |
+| `reactive_power_l3`          | 0x1C     | VAr   | L3 reactive power                                                              |
+| `power_factor_l1`            | 0x1E     | -     | L1 power factor                                                                |
+| `power_factor_l2`            | 0x20     | -     | L2 power factor                                                                |
+| `power_factor_l3`            | 0x22     | -     | L3 power factor                                                                |
+| `phase_angle_l1`             | 0x24     | -     | L1 phase angle (degrees)                                                       |
+| `phase_angle_l2`             | 0x26     | -     | L2 phase angle (degrees)                                                       |
+| `phase_angle_l3`             | 0x28     | -     | L3 phase angle (degrees)                                                       |
+| `voltage_ln_average`         | 0x2A     | V     | Average L-N Voltage                                                            |
+| `current_average`            | 0x2E     | A     | Average Line Current                                                           |
+| `current_sum`                | 0x30     | A     | Sum of Line Currents                                                           |
+| `active_power_total`         | 0x34     | W     | Total Active Power                                                             |
+| `apparent_power_total`       | 0x38     | VA    | Total Apparent Power                                                           |
+| `reactive_power_total`       | 0x3C     | VAr   | Total Reactive Power                                                           |
+| `power_factor_total`         | 0x3E     | -     | Total Power Factor                                                             |
+| `phase_angle_total`          | 0x42     | -     | Total phase angle (degrees)                                                    |
+| `frequency`                  | 0x46     | Hz    | Grid Frequency                                                                 |
+| `active_energy_forward`      | 0x48     | kWh   | Import Active Energy                                                           |
+| `active_energy_reverse`      | 0x4A     | kWh   | Export Active Energy                                                           |
+| `reactive_energy_forward`    | 0x4C     | kVArh | Import Reactive Energy                                                         |
+| `reactive_energy_reverse`    | 0x4E     | kVArh | Export Reactive Energy                                                         |
+| `apparent_energy_total`      | 0x50     | -     | Total apparent energy (kVAh)                                                   |
+| `charge_total`               | 0x52     | Ah    | Total Charge                                                                   |
+| `active_power_demand`        | 0x54     | W     | Total Active Power Demand                                                      |
+| `active_power_demand_max`    | 0x56     | W     | Maximum total active power demand (the manual says VA, the real meter gives W) |
+| `apparent_power_demand`      | 0x64     | VA    | Total Apparent Power Demand                                                    |
+| `apparent_power_demand_max`  | 0x66     | VA    | Maximum Apparent Power Demand                                                  |
+| `voltage_l1_l2`              | 0xC8     | V     | L1-L2 voltage                                                                  |
+| `voltage_l2_l3`              | 0xCA     | V     | L2-L3 voltage                                                                  |
+| `voltage_l3_l1`              | 0xCC     | V     | L3-L1 voltage                                                                  |
+| `voltage_ll_average`         | 0xCE     | V     | Average L-L Voltage                                                            |
+| `current_neutral`            | 0xE0     | A     | Neutral Current                                                                |
+| `voltage_thd_l1`             | 0xEA     | %     | L1 voltage thd                                                                 |
+| `voltage_thd_l2`             | 0xEC     | %     | L2 voltage thd                                                                 |
+| `voltage_thd_l3`             | 0xEE     | %     | L3 voltage thd                                                                 |
+| `current_thd_l1`             | 0xF0     | %     | L1 current thd                                                                 |
+| `current_thd_l2`             | 0xF2     | %     | L2 current thd                                                                 |
+| `current_thd_l3`             | 0xF4     | %     | L3 current thd                                                                 |
+| `voltage_thd_ln_average`     | 0xF8     | %     | Average L-N Voltage THD                                                        |
+| `current_thd_average`        | 0xFA     | %     | Average Current THD                                                            |
+| `current_demand_l1`          | 0x102    | A     | L1 current demand                                                              |
+| `current_demand_l2`          | 0x104    | A     | L2 current demand                                                              |
+| `current_demand_l3`          | 0x106    | A     | L3 current demand                                                              |
+| `current_demand_max_l1`      | 0x108    | A     | L1 maximum current demand                                                      |
+| `current_demand_max_l2`      | 0x10A    | A     | L2 maximum current demand                                                      |
+| `current_demand_max_l3`      | 0x10C    | A     | L3 maximum current demand                                                      |
+| `voltage_thd_l1_l2`          | 0x14E    | %     | L1-L2 voltage thd                                                              |
+| `voltage_thd_l2_l3`          | 0x150    | %     | L2-L3 voltage thd                                                              |
+| `voltage_thd_l3_l1`          | 0x152    | %     | L3-L1 voltage thd                                                              |
+| `voltage_thd_ll_average`     | 0x154    | %     | Average L-L Voltage THD                                                        |
+| `active_energy_total`        | 0x156    | kWh   | Total Active Energy                                                            |
+| `reactive_energy_total`      | 0x158    | kVArh | Total Reactive Energy                                                          |
+| `active_energy_forward_l1`   | 0x15A    | kWh   | L1 import active energy                                                        |
+| `active_energy_forward_l2`   | 0x15C    | kWh   | L2 import active energy                                                        |
+| `active_energy_forward_l3`   | 0x15E    | kWh   | L3 import active energy                                                        |
+| `active_energy_reverse_l1`   | 0x160    | kWh   | L1 export active energy                                                        |
+| `active_energy_reverse_l2`   | 0x162    | kWh   | L2 export active energy                                                        |
+| `active_energy_reverse_l3`   | 0x164    | kWh   | L3 export active energy                                                        |
+| `active_energy_l1`           | 0x166    | kWh   | L1 total active energy                                                         |
+| `active_energy_l2`           | 0x168    | kWh   | L2 total active energy                                                         |
+| `active_energy_l3`           | 0x16A    | kWh   | L3 total active energy                                                         |
+| `reactive_energy_forward_l1` | 0x16C    | kVArh | L1 import reactive energy                                                      |
+| `reactive_energy_forward_l2` | 0x16E    | kVArh | L2 import reactive energy                                                      |
+| `reactive_energy_forward_l3` | 0x170    | kVArh | L3 import reactive energy                                                      |
+| `reactive_energy_reverse_l1` | 0x172    | kVArh | L1 export reactive energy                                                      |
+| `reactive_energy_reverse_l2` | 0x174    | kVArh | L2 export reactive energy                                                      |
+| `reactive_energy_reverse_l3` | 0x176    | kVArh | L3 export reactive energy                                                      |
+| `reactive_energy_l1`         | 0x178    | kVArh | L1 total reactive energy                                                       |
+| `reactive_energy_l2`         | 0x17A    | kVArh | L2 total reactive energy                                                       |
+| `reactive_energy_l3`         | 0x17C    | kVArh | L3 total reactive energy                                                       |
+
+"Import" is the `forward` energy and "export" is the `reverse` energy. Ids follow `driver-or-we-516` where the meaning is the same.
+
+The driver reads the registers in at most 6 requests per poll: 0x00 (80 registers), 0x50 (8), 0x64 (4), 0xC8 (8), 0xE0 (46) and 0x14E (48). The homy Modbus reader reads these same blocks from a real meter; the gaps inside them read without errors. The meter allows at most 80 registers per request. A block is read only when one of its data points is requested.
+
+Not included: neutral current demand and its maximum (0x68, 0x6A) and the settings (holding registers: demand period, system type, baud rate, parity and stop bits, address).
+
+## Notes
+
+- **Average line current is at 0x2E.** Register 0x2C is not in the manual and returns 0 on a real meter.
+- **Line-to-line voltage THD (0x14E to 0x154) returns 0** on the meter of the owner. The data points are kept so every value the homy Modbus reader publishes is also published here.
+- **0x56 is the maximum of the power demand in W.** The manual table says VA, which is probably a mistake in the manual (checked on a real meter on 2026-10-14).
+
+## Sources
+
+- "SDM630 Modbus Protocol" V1.8: https://www.eastroneurope.com/images/uploads/products/protocol/SDM630_MODBUS_Protocol.pdf
+
+## License
+
+GPL-3.0-or-later

package/dist/cjs/package.json

@@ -0,0 +1 @@
+{"type":"commonjs"}

package/dist/cjs/src/index.d.ts

@@ -0,0 +1,50 @@
+/**
+ * Eastron SDM630 3-Phase Energy Meter Driver
+ *
+ * 3-phase + N energy meter, DIN rail, RS-485, Modbus RTU.
+ *
+ * Factory default specifications are exported via the DEFAULT_CONFIG constant.
+ * See DEFAULT_CONFIG for baud rate, parity, data bits, stop bits, and default address.
+ *
+ * Register mapping (input registers, FC 04, float32 big-endian, 2 registers each),
+ * from "SDM630 Modbus Protocol" V1.8. A full poll reads 6 blocks:
+ * - 0x00 x 80: phase values, totals, frequency, energy
+ * - 0x50 x 8: kVAh, Ah, power demand
+ * - 0x64 x 4: VA demand
+ * - 0xC8 x 8: line-to-line voltage
+ * - 0xE0 x 46: neutral current, THD, current demand
+ * - 0x14E x 48: line-to-line THD, total and per-phase energy
+ */
+import type { CreateDriverFunction } from '@ya-modbus/driver-types';
+/**
+ * Supported configuration values for SDM630
+ *
+ * From the manual: "User Option Of Parity And Stop Bits: No Parity and 2 Stop Bits /
+ * No Parity and 1 Stop Bit / Even Parity and 1 Stop Bit / Odd Parity and 1 Stop Bit"
+ * and "User Option of Baud 2400; 4800 ; 9600 ; 19200 ; 38400".
+ * The address range is "1 to 247".
+ */
+export declare const SUPPORTED_CONFIG: {
+    readonly validBaudRates: readonly [2400, 4800, 9600, 19200, 38400];
+    readonly validParity: readonly ["none", "even", "odd"];
+    readonly validDataBits: readonly [8];
+    readonly validStopBits: readonly [1, 2];
+    readonly validAddressRange: readonly [1, 247];
+};
+/**
+ * Default SDM630 device configuration
+ *
+ * Use these values when connecting to a factory-default SDM630 device.
+ */
+export declare const DEFAULT_CONFIG: {
+    readonly baudRate: 9600;
+    readonly parity: "none";
+    readonly dataBits: 8;
+    readonly stopBits: 1;
+    readonly defaultAddress: 1;
+};
+/**
+ * Create SDM630 device driver
+ */
+export declare const createDriver: CreateDriverFunction;
+//# sourceMappingURL=index.d.ts.map

package/dist/cjs/src/index.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.d.ts","sourceRoot":"","sources":["../../../src/index.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;GAgBG;AAGH,OAAO,KAAK,EACV,oBAAoB,EAMrB,MAAM,yBAAyB,CAAA;AAEhC;;;;;;;GAOG;AACH,eAAO,MAAM,gBAAgB;;;;;;CAMa,CAAA;AAE1C;;;;GAIG;AACH,eAAO,MAAM,cAAc;;;;;;CAMa,CAAA;AAqJxC;;GAEG;AACH,eAAO,MAAM,YAAY,EAAE,oBA6C1B,CAAA"}

package/dist/cjs/src/index.js

@@ -0,0 +1,164 @@
+"use strict";
+/**
+ * Eastron SDM630 3-Phase Energy Meter Driver
+ *
+ * 3-phase + N energy meter, DIN rail, RS-485, Modbus RTU.
+ *
+ * Factory default specifications are exported via the DEFAULT_CONFIG constant.
+ * See DEFAULT_CONFIG for baud rate, parity, data bits, stop bits, and default address.
+ *
+ * Register mapping (input registers, FC 04, float32 big-endian, 2 registers each),
+ * from "SDM630 Modbus Protocol" V1.8. A full poll reads 6 blocks:
+ * - 0x00 x 80: phase values, totals, frequency, energy
+ * - 0x50 x 8: kVAh, Ah, power demand
+ * - 0x64 x 4: VA demand
+ * - 0xC8 x 8: line-to-line voltage
+ * - 0xE0 x 46: neutral current, THD, current demand
+ * - 0x14E x 48: line-to-line THD, total and per-phase energy
+ */
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.createDriver = exports.DEFAULT_CONFIG = exports.SUPPORTED_CONFIG = void 0;
+const driver_sdk_1 = require("@ya-modbus/driver-sdk");
+/**
+ * Supported configuration values for SDM630
+ *
+ * From the manual: "User Option Of Parity And Stop Bits: No Parity and 2 Stop Bits /
+ * No Parity and 1 Stop Bit / Even Parity and 1 Stop Bit / Odd Parity and 1 Stop Bit"
+ * and "User Option of Baud 2400; 4800 ; 9600 ; 19200 ; 38400".
+ * The address range is "1 to 247".
+ */
+exports.SUPPORTED_CONFIG = {
+    validBaudRates: [2400, 4800, 9600, 19200, 38400],
+    validParity: ['none', 'even', 'odd'],
+    validDataBits: [8],
+    validStopBits: [1, 2],
+    validAddressRange: [1, 247],
+};
+/**
+ * Default SDM630 device configuration
+ *
+ * Use these values when connecting to a factory-default SDM630 device.
+ */
+exports.DEFAULT_CONFIG = {
+    baudRate: 9600,
+    parity: 'none',
+    dataBits: 8,
+    stopBits: 1,
+    defaultAddress: 1,
+};
+const MAIN = { address: 0x00, count: 80 };
+const DEMAND = { address: 0x50, count: 8 };
+const VA_DEMAND = { address: 0x64, count: 4 };
+const LINE_VOLTAGE = { address: 0xc8, count: 8 };
+const NEUTRAL_THD = { address: 0xe0, count: 46 };
+const ENERGY = { address: 0x14e, count: 48 };
+const PHASES = ['l1', 'l2', 'l3'];
+const LINES = ['l1_l2', 'l2_l3', 'l3_l1'];
+/** A data point for one float32 register pair */
+function single(block, register, id, name, unit, decimals, description = name) {
+    return {
+        block,
+        register,
+        point: { id, name, type: 'float', ...(unit && { unit }), access: 'r', description, decimals },
+    };
+}
+/** Three data points, 2 registers apart, one per phase (or per line pair) */
+function triple(block, first, idPrefix, namePrefix, unit, decimals, suffixes = PHASES, description = '') {
+    return suffixes.map((suffix, i) => {
+        const label = suffix.toUpperCase().replace('_', '-');
+        return single(block, first + i * 2, `${idPrefix}_${suffix}`, `${label} ${namePrefix}`, unit, decimals, `${label} ${namePrefix.toLowerCase()}${description}`);
+    });
+}
+const DEGREES = ' (degrees)';
+const REGISTERS = [
+    ...triple(MAIN, 0x00, 'voltage', 'Voltage', 'V', 1),
+    ...triple(MAIN, 0x06, 'current', 'Current', 'A', 3),
+    ...triple(MAIN, 0x0c, 'active_power', 'Active Power', 'W', 1),
+    ...triple(MAIN, 0x12, 'apparent_power', 'Apparent Power', 'VA', 1),
+    ...triple(MAIN, 0x18, 'reactive_power', 'Reactive Power', 'VAr', 1),
+    ...triple(MAIN, 0x1e, 'power_factor', 'Power Factor', undefined, 3),
+    ...triple(MAIN, 0x24, 'phase_angle', 'Phase Angle', undefined, 1, PHASES, DEGREES),
+    single(MAIN, 0x2a, 'voltage_ln_average', 'Average L-N Voltage', 'V', 1),
+    single(MAIN, 0x2e, 'current_average', 'Average Line Current', 'A', 3),
+    single(MAIN, 0x30, 'current_sum', 'Sum of Line Currents', 'A', 3),
+    single(MAIN, 0x34, 'active_power_total', 'Total Active Power', 'W', 1),
+    single(MAIN, 0x38, 'apparent_power_total', 'Total Apparent Power', 'VA', 1),
+    single(MAIN, 0x3c, 'reactive_power_total', 'Total Reactive Power', 'VAr', 1),
+    single(MAIN, 0x3e, 'power_factor_total', 'Total Power Factor', undefined, 3),
+    single(MAIN, 0x42, 'phase_angle_total', 'Total Phase Angle', undefined, 1, 'Total phase angle (degrees)'),
+    single(MAIN, 0x46, 'frequency', 'Grid Frequency', 'Hz', 2),
+    single(MAIN, 0x48, 'active_energy_forward', 'Import Active Energy', 'kWh', 2),
+    single(MAIN, 0x4a, 'active_energy_reverse', 'Export Active Energy', 'kWh', 2),
+    single(MAIN, 0x4c, 'reactive_energy_forward', 'Import Reactive Energy', 'kVArh', 2),
+    single(MAIN, 0x4e, 'reactive_energy_reverse', 'Export Reactive Energy', 'kVArh', 2),
+    single(DEMAND, 0x50, 'apparent_energy_total', 'Total Apparent Energy', undefined, 2, 'Total apparent energy (kVAh)'),
+    single(DEMAND, 0x52, 'charge_total', 'Total Charge', 'Ah', 2),
+    single(DEMAND, 0x54, 'active_power_demand', 'Total Active Power Demand', 'W', 1),
+    single(DEMAND, 0x56, 'active_power_demand_max', 'Maximum Total Active Power Demand', 'W', 1, 'Maximum total active power demand (the manual says VA, the real meter gives W)'),
+    single(VA_DEMAND, 0x64, 'apparent_power_demand', 'Total Apparent Power Demand', 'VA', 1),
+    single(VA_DEMAND, 0x66, 'apparent_power_demand_max', 'Maximum Apparent Power Demand', 'VA', 1),
+    ...triple(LINE_VOLTAGE, 0xc8, 'voltage', 'Voltage', 'V', 1, LINES),
+    single(LINE_VOLTAGE, 0xce, 'voltage_ll_average', 'Average L-L Voltage', 'V', 1),
+    single(NEUTRAL_THD, 0xe0, 'current_neutral', 'Neutral Current', 'A', 3),
+    ...triple(NEUTRAL_THD, 0xea, 'voltage_thd', 'Voltage THD', '%', 2),
+    ...triple(NEUTRAL_THD, 0xf0, 'current_thd', 'Current THD', '%', 2),
+    single(NEUTRAL_THD, 0xf8, 'voltage_thd_ln_average', 'Average L-N Voltage THD', '%', 2),
+    single(NEUTRAL_THD, 0xfa, 'current_thd_average', 'Average Current THD', '%', 2),
+    ...triple(NEUTRAL_THD, 0x102, 'current_demand', 'Current Demand', 'A', 3),
+    ...triple(NEUTRAL_THD, 0x108, 'current_demand_max', 'Maximum Current Demand', 'A', 3),
+    ...triple(ENERGY, 0x14e, 'voltage_thd', 'Voltage THD', '%', 2, LINES),
+    single(ENERGY, 0x154, 'voltage_thd_ll_average', 'Average L-L Voltage THD', '%', 2),
+    single(ENERGY, 0x156, 'active_energy_total', 'Total Active Energy', 'kWh', 2),
+    single(ENERGY, 0x158, 'reactive_energy_total', 'Total Reactive Energy', 'kVArh', 2),
+    ...triple(ENERGY, 0x15a, 'active_energy_forward', 'Import Active Energy', 'kWh', 2),
+    ...triple(ENERGY, 0x160, 'active_energy_reverse', 'Export Active Energy', 'kWh', 2),
+    ...triple(ENERGY, 0x166, 'active_energy', 'Total Active Energy', 'kWh', 2),
+    ...triple(ENERGY, 0x16c, 'reactive_energy_forward', 'Import Reactive Energy', 'kVArh', 2),
+    ...triple(ENERGY, 0x172, 'reactive_energy_reverse', 'Export Reactive Energy', 'kVArh', 2),
+    ...triple(ENERGY, 0x178, 'reactive_energy', 'Total Reactive Energy', 'kVArh', 2),
+];
+const DATA_POINTS = REGISTERS.map((r) => r.point);
+const REGISTER_BY_ID = new Map(REGISTERS.map((r) => [r.point.id, r]));
+/**
+ * Create SDM630 device driver
+ */
+const createDriver = (config) => {
+    const { transport } = config;
+    /** Read each needed block once and decode the requested ids */
+    async function read(ids) {
+        const unknown = ids.filter((id) => !REGISTER_BY_ID.has(id));
+        if (unknown.length > 0) {
+            throw new Error(`Unknown data points: ${unknown.join(', ')}`);
+        }
+        const wanted = ids.map((id) => REGISTER_BY_ID.get(id));
+        const blocks = new Set(wanted.map((r) => r.block));
+        const buffers = new Map();
+        for (const block of blocks) {
+            buffers.set(block, await transport.readInputRegisters(block.address, block.count));
+        }
+        const result = {};
+        for (const { block, register, point } of wanted) {
+            result[point.id] = (0, driver_sdk_1.readFloatBE)(buffers.get(block), (register - block.address) * 2);
+        }
+        return result;
+    }
+    const driver = {
+        name: 'SDM630',
+        manufacturer: 'Eastron',
+        model: 'SDM630',
+        dataPoints: DATA_POINTS,
+        async readDataPoint(id) {
+            if (!REGISTER_BY_ID.has(id)) {
+                throw new Error(`Unknown data point: ${id}`);
+            }
+            return (await read([id]))[id];
+        },
+        writeDataPoint(id) {
+            return Promise.reject(new Error(`Data point ${id} is read-only`));
+        },
+        readDataPoints: read,
+    };
+    return Promise.resolve(driver);
+};
+exports.createDriver = createDriver;
+//# sourceMappingURL=index.js.map

package/dist/cjs/src/index.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"index.js","sourceRoot":"","sources":["../../../src/index.ts"],"names":[],"mappings":";AAAA;;;;;;;;;;;;;;;;GAgBG;;;AAEH,sDAAmD;AAUnD;;;;;;;GAOG;AACU,QAAA,gBAAgB,GAAG;IAC9B,cAAc,EAAE,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,EAAE,KAAK,EAAE,KAAK,CAAC;IAChD,WAAW,EAAE,CAAC,MAAM,EAAE,MAAM,EAAE,KAAK,CAAC;IACpC,aAAa,EAAE,CAAC,CAAC,CAAC;IAClB,aAAa,EAAE,CAAC,CAAC,EAAE,CAAC,CAAC;IACrB,iBAAiB,EAAE,CAAC,CAAC,EAAE,GAAG,CAAC;CACa,CAAA;AAE1C;;;;GAIG;AACU,QAAA,cAAc,GAAG;IAC5B,QAAQ,EAAE,IAAI;IACd,MAAM,EAAE,MAAM;IACd,QAAQ,EAAE,CAAC;IACX,QAAQ,EAAE,CAAC;IACX,cAAc,EAAE,CAAC;CACqB,CAAA;AAYxC,MAAM,IAAI,GAAU,EAAE,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,CAAA;AAChD,MAAM,MAAM,GAAU,EAAE,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,CAAC,EAAE,CAAA;AACjD,MAAM,SAAS,GAAU,EAAE,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,CAAC,EAAE,CAAA;AACpD,MAAM,YAAY,GAAU,EAAE,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,CAAC,EAAE,CAAA;AACvD,MAAM,WAAW,GAAU,EAAE,OAAO,EAAE,IAAI,EAAE,KAAK,EAAE,EAAE,EAAE,CAAA;AACvD,MAAM,MAAM,GAAU,EAAE,OAAO,EAAE,KAAK,EAAE,KAAK,EAAE,EAAE,EAAE,CAAA;AASnD,MAAM,MAAM,GAAG,CAAC,IAAI,EAAE,IAAI,EAAE,IAAI,CAAC,CAAA;AACjC,MAAM,KAAK,GAAG,CAAC,OAAO,EAAE,OAAO,EAAE,OAAO,CAAC,CAAA;AAEzC,iDAAiD;AACjD,SAAS,MAAM,CACb,KAAY,EACZ,QAAgB,EAChB,EAAU,EACV,IAAY,EACZ,IAAuB,EACvB,QAAgB,EAChB,WAAW,GAAG,IAAI;IAElB,OAAO;QACL,KAAK;QACL,QAAQ;QACR,KAAK,EAAE,EAAE,EAAE,EAAE,IAAI,EAAE,IAAI,EAAE,OAAO,EAAE,GAAG,CAAC,IAAI,IAAI,EAAE,IAAI,EAAE,CAAC,EAAE,MAAM,EAAE,GAAG,EAAE,WAAW,EAAE,QAAQ,EAAE;KAC9F,CAAA;AACH,CAAC;AAED,6EAA6E;AAC7E,SAAS,MAAM,CACb,KAAY,EACZ,KAAa,EACb,QAAgB,EAChB,UAAkB,EAClB,IAAuB,EACvB,QAAgB,EAChB,QAAQ,GAAG,MAAM,EACjB,WAAW,GAAG,EAAE;IAEhB,OAAO,QAAQ,CAAC,GAAG,CAAC,CAAC,MAAM,EAAE,CAAC,EAAE,EAAE;QAChC,MAAM,KAAK,GAAG,MAAM,CAAC,WAAW,EAAE,CAAC,OAAO,CAAC,GAAG,EAAE,GAAG,CAAC,CAAA;QACpD,OAAO,MAAM,CACX,KAAK,EACL,KAAK,GAAG,CAAC,GAAG,CAAC,EACb,GAAG,QAAQ,IAAI,MAAM,EAAE,EACvB,GAAG,KAAK,IAAI,UAAU,EAAE,EACxB,IAAI,EACJ,QAAQ,EACR,GAAG,KAAK,IAAI,UAAU,CAAC,WAAW,EAAE,GAAG,WAAW,EAAE,CACrD,CAAA;IACH,CAAC,CAAC,CAAA;AACJ,CAAC;AAED,MAAM,OAAO,GAAG,YAAY,CAAA;AAE5B,MAAM,SAAS,GAA4B;IACzC,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,SAAS,EAAE,SAAS,EAAE,GAAG,EAAE,CAAC,CAAC;IACnD,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,SAAS,EAAE,SAAS,EAAE,GAAG,EAAE,CAAC,CAAC;IACnD,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,cAAc,EAAE,cAAc,EAAE,GAAG,EAAE,CAAC,CAAC;IAC7D,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,IAAI,EAAE,CAAC,CAAC;IAClE,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,KAAK,EAAE,CAAC,CAAC;IACnE,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,cAAc,EAAE,cAAc,EAAE,SAAS,EAAE,CAAC,CAAC;IACnE,GAAG,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,aAAa,EAAE,aAAa,EAAE,SAAS,EAAE,CAAC,EAAE,MAAM,EAAE,OAAO,CAAC;IAClF,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,oBAAoB,EAAE,qBAAqB,EAAE,GAAG,EAAE,CAAC,CAAC;IACvE,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,iBAAiB,EAAE,sBAAsB,EAAE,GAAG,EAAE,CAAC,CAAC;IACrE,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,aAAa,EAAE,sBAAsB,EAAE,GAAG,EAAE,CAAC,CAAC;IACjE,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,oBAAoB,EAAE,oBAAoB,EAAE,GAAG,EAAE,CAAC,CAAC;IACtE,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,sBAAsB,EAAE,sBAAsB,EAAE,IAAI,EAAE,CAAC,CAAC;IAC3E,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,sBAAsB,EAAE,sBAAsB,EAAE,KAAK,EAAE,CAAC,CAAC;IAC5E,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,oBAAoB,EAAE,oBAAoB,EAAE,SAAS,EAAE,CAAC,CAAC;IAC5E,MAAM,CACJ,IAAI,EACJ,IAAI,EACJ,mBAAmB,EACnB,mBAAmB,EACnB,SAAS,EACT,CAAC,EACD,6BAA6B,CAC9B;IACD,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,WAAW,EAAE,gBAAgB,EAAE,IAAI,EAAE,CAAC,CAAC;IAC1D,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,uBAAuB,EAAE,sBAAsB,EAAE,KAAK,EAAE,CAAC,CAAC;IAC7E,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,uBAAuB,EAAE,sBAAsB,EAAE,KAAK,EAAE,CAAC,CAAC;IAC7E,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,yBAAyB,EAAE,wBAAwB,EAAE,OAAO,EAAE,CAAC,CAAC;IACnF,MAAM,CAAC,IAAI,EAAE,IAAI,EAAE,yBAAyB,EAAE,wBAAwB,EAAE,OAAO,EAAE,CAAC,CAAC;IACnF,MAAM,CACJ,MAAM,EACN,IAAI,EACJ,uBAAuB,EACvB,uBAAuB,EACvB,SAAS,EACT,CAAC,EACD,8BAA8B,CAC/B;IACD,MAAM,CAAC,MAAM,EAAE,IAAI,EAAE,cAAc,EAAE,cAAc,EAAE,IAAI,EAAE,CAAC,CAAC;IAC7D,MAAM,CAAC,MAAM,EAAE,IAAI,EAAE,qBAAqB,EAAE,2BAA2B,EAAE,GAAG,EAAE,CAAC,CAAC;IAChF,MAAM,CACJ,MAAM,EACN,IAAI,EACJ,yBAAyB,EACzB,mCAAmC,EACnC,GAAG,EACH,CAAC,EACD,gFAAgF,CACjF;IACD,MAAM,CAAC,SAAS,EAAE,IAAI,EAAE,uBAAuB,EAAE,6BAA6B,EAAE,IAAI,EAAE,CAAC,CAAC;IACxF,MAAM,CAAC,SAAS,EAAE,IAAI,EAAE,2BAA2B,EAAE,+BAA+B,EAAE,IAAI,EAAE,CAAC,CAAC;IAC9F,GAAG,MAAM,CAAC,YAAY,EAAE,IAAI,EAAE,SAAS,EAAE,SAAS,EAAE,GAAG,EAAE,CAAC,EAAE,KAAK,CAAC;IAClE,MAAM,CAAC,YAAY,EAAE,IAAI,EAAE,oBAAoB,EAAE,qBAAqB,EAAE,GAAG,EAAE,CAAC,CAAC;IAC/E,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,iBAAiB,EAAE,iBAAiB,EAAE,GAAG,EAAE,CAAC,CAAC;IACvE,GAAG,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,aAAa,EAAE,aAAa,EAAE,GAAG,EAAE,CAAC,CAAC;IAClE,GAAG,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,aAAa,EAAE,aAAa,EAAE,GAAG,EAAE,CAAC,CAAC;IAClE,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,wBAAwB,EAAE,yBAAyB,EAAE,GAAG,EAAE,CAAC,CAAC;IACtF,MAAM,CAAC,WAAW,EAAE,IAAI,EAAE,qBAAqB,EAAE,qBAAqB,EAAE,GAAG,EAAE,CAAC,CAAC;IAC/E,GAAG,MAAM,CAAC,WAAW,EAAE,KAAK,EAAE,gBAAgB,EAAE,gBAAgB,EAAE,GAAG,EAAE,CAAC,CAAC;IACzE,GAAG,MAAM,CAAC,WAAW,EAAE,KAAK,EAAE,oBAAoB,EAAE,wBAAwB,EAAE,GAAG,EAAE,CAAC,CAAC;IACrF,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,aAAa,EAAE,aAAa,EAAE,GAAG,EAAE,CAAC,EAAE,KAAK,CAAC;IACrE,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,wBAAwB,EAAE,yBAAyB,EAAE,GAAG,EAAE,CAAC,CAAC;IAClF,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,qBAAqB,EAAE,qBAAqB,EAAE,KAAK,EAAE,CAAC,CAAC;IAC7E,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,uBAAuB,EAAE,uBAAuB,EAAE,OAAO,EAAE,CAAC,CAAC;IACnF,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,uBAAuB,EAAE,sBAAsB,EAAE,KAAK,EAAE,CAAC,CAAC;IACnF,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,uBAAuB,EAAE,sBAAsB,EAAE,KAAK,EAAE,CAAC,CAAC;IACnF,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,eAAe,EAAE,qBAAqB,EAAE,KAAK,EAAE,CAAC,CAAC;IAC1E,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,yBAAyB,EAAE,wBAAwB,EAAE,OAAO,EAAE,CAAC,CAAC;IACzF,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,yBAAyB,EAAE,wBAAwB,EAAE,OAAO,EAAE,CAAC,CAAC;IACzF,GAAG,MAAM,CAAC,MAAM,EAAE,KAAK,EAAE,iBAAiB,EAAE,uBAAuB,EAAE,OAAO,EAAE,CAAC,CAAC;CACjF,CAAA;AAED,MAAM,WAAW,GAA6B,SAAS,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,CAAC,CAAA;AAE3E,MAAM,cAAc,GAAG,IAAI,GAAG,CAAC,SAAS,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,KAAK,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,CAAA;AAErE;;GAEG;AACI,MAAM,YAAY,GAAyB,CAAC,MAAoB,EAAE,EAAE;IACzE,MAAM,EAAE,SAAS,EAAE,GAAG,MAAM,CAAA;IAE5B,+DAA+D;IAC/D,KAAK,UAAU,IAAI,CAAC,GAAa;QAC/B,MAAM,OAAO,GAAG,GAAG,CAAC,MAAM,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,CAAC,cAAc,CAAC,GAAG,CAAC,EAAE,CAAC,CAAC,CAAA;QAC3D,IAAI,OAAO,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;YACvB,MAAM,IAAI,KAAK,CAAC,wBAAwB,OAAO,CAAC,IAAI,CAAC,IAAI,CAAC,EAAE,CAAC,CAAA;QAC/D,CAAC;QAED,MAAM,MAAM,GAAG,GAAG,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,cAAc,CAAC,GAAG,CAAC,EAAE,CAAa,CAAC,CAAA;QAClE,MAAM,MAAM,GAAG,IAAI,GAAG,CAAC,MAAM,CAAC,GAAG,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,KAAK,CAAC,CAAC,CAAA;QAClD,MAAM,OAAO,GAAG,IAAI,GAAG,EAAiB,CAAA;QACxC,KAAK,MAAM,KAAK,IAAI,MAAM,EAAE,CAAC;YAC3B,OAAO,CAAC,GAAG,CAAC,KAAK,EAAE,MAAM,SAAS,CAAC,kBAAkB,CAAC,KAAK,CAAC,OAAO,EAAE,KAAK,CAAC,KAAK,CAAC,CAAC,CAAA;QACpF,CAAC;QAED,MAAM,MAAM,GAA4B,EAAE,CAAA;QAC1C,KAAK,MAAM,EAAE,KAAK,EAAE,QAAQ,EAAE,KAAK,EAAE,IAAI,MAAM,EAAE,CAAC;YAChD,MAAM,CAAC,KAAK,CAAC,EAAE,CAAC,GAAG,IAAA,wBAAW,EAAC,OAAO,CAAC,GAAG,CAAC,KAAK,CAAW,EAAE,CAAC,QAAQ,GAAG,KAAK,CAAC,OAAO,CAAC,GAAG,CAAC,CAAC,CAAA;QAC9F,CAAC;QACD,OAAO,MAAM,CAAA;IACf,CAAC;IAED,MAAM,MAAM,GAAiB;QAC3B,IAAI,EAAE,QAAQ;QACd,YAAY,EAAE,SAAS;QACvB,KAAK,EAAE,QAAQ;QACf,UAAU,EAAE,WAAW;QAEvB,KAAK,CAAC,aAAa,CAAC,EAAU;YAC5B,IAAI,CAAC,cAAc,CAAC,GAAG,CAAC,EAAE,CAAC,EAAE,CAAC;gBAC5B,MAAM,IAAI,KAAK,CAAC,uBAAuB,EAAE,EAAE,CAAC,CAAA;YAC9C,CAAC;YACD,OAAO,CAAC,MAAM,IAAI,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,CAAC,EAAE,CAAC,CAAA;QAC/B,CAAC;QAED,cAAc,CAAC,EAAU;YACvB,OAAO,OAAO,CAAC,MAAM,CAAC,IAAI,KAAK,CAAC,cAAc,EAAE,eAAe,CAAC,CAAC,CAAA;QACnE,CAAC;QAED,cAAc,EAAE,IAAI;KACrB,CAAA;IAED,OAAO,OAAO,CAAC,OAAO,CAAC,MAAM,CAAC,CAAA;AAChC,CAAC,CAAA;AA7CY,QAAA,YAAY,gBA6CxB"}