@xpla/xpla-react 1.7.0-beta.0 → 1.7.0-beta.11

package/ethermint/evm/v1/evm.d.ts

@@ -0,0 +1,538 @@
+import { BinaryReader, BinaryWriter } from "../../../binary";
+import { DeepPartial } from "../../../helpers";
+/** Params defines the EVM module parameters */
+export interface Params {
+    /**
+     * evm_denom represents the token denomination used to run the EVM state
+     * transitions.
+     */
+    evmDenom: string;
+    /** enable_create toggles state transitions that use the vm.Create function */
+    enableCreate: boolean;
+    /** enable_call toggles state transitions that use the vm.Call function */
+    enableCall: boolean;
+    /** extra_eips defines the additional EIPs for the vm.Config */
+    extraEips: bigint[];
+    /** chain_config defines the EVM chain configuration parameters */
+    chainConfig: ChainConfig;
+    /**
+     * allow_unprotected_txs defines if replay-protected (i.e non EIP155
+     * signed) transactions can be executed on the state machine.
+     */
+    allowUnprotectedTxs: boolean;
+}
+export interface ParamsProtoMsg {
+    typeUrl: "/ethermint.evm.v1.Params";
+    value: Uint8Array;
+}
+/** Params defines the EVM module parameters */
+export interface ParamsAmino {
+    /**
+     * evm_denom represents the token denomination used to run the EVM state
+     * transitions.
+     */
+    evm_denom: string;
+    /** enable_create toggles state transitions that use the vm.Create function */
+    enable_create: boolean;
+    /** enable_call toggles state transitions that use the vm.Call function */
+    enable_call: boolean;
+    /** extra_eips defines the additional EIPs for the vm.Config */
+    extra_eips: string[];
+    /** chain_config defines the EVM chain configuration parameters */
+    chain_config: ChainConfigAmino;
+    /**
+     * allow_unprotected_txs defines if replay-protected (i.e non EIP155
+     * signed) transactions can be executed on the state machine.
+     */
+    allow_unprotected_txs: boolean;
+}
+export interface ParamsAminoMsg {
+    type: "ethermint/x/evm/Params";
+    value: ParamsAmino;
+}
+/**
+ * ChainConfig defines the Ethereum ChainConfig parameters using *sdk.Int values
+ * instead of *big.Int.
+ */
+export interface ChainConfig {
+    /** homestead_block switch (nil no fork, 0 = already homestead) */
+    homesteadBlock: string;
+    /** dao_fork_block corresponds to TheDAO hard-fork switch block (nil no fork) */
+    daoForkBlock: string;
+    /** dao_fork_support defines whether the nodes supports or opposes the DAO hard-fork */
+    daoForkSupport: boolean;
+    /**
+     * eip150_block: EIP150 implements the Gas price changes
+     * (https://github.com/ethereum/EIPs/issues/150) EIP150 HF block (nil no fork)
+     */
+    eip150Block: string;
+    /** eip150_hash: EIP150 HF hash (needed for header only clients as only gas pricing changed) */
+    eip150Hash: string;
+    /** eip155_block: EIP155Block HF block */
+    eip155Block: string;
+    /** eip158_block: EIP158 HF block */
+    eip158Block: string;
+    /** byzantium_block: Byzantium switch block (nil no fork, 0 = already on byzantium) */
+    byzantiumBlock: string;
+    /** constantinople_block: Constantinople switch block (nil no fork, 0 = already activated) */
+    constantinopleBlock: string;
+    /** petersburg_block: Petersburg switch block (nil same as Constantinople) */
+    petersburgBlock: string;
+    /** istanbul_block: Istanbul switch block (nil no fork, 0 = already on istanbul) */
+    istanbulBlock: string;
+    /** muir_glacier_block: Eip-2384 (bomb delay) switch block (nil no fork, 0 = already activated) */
+    muirGlacierBlock: string;
+    /** berlin_block: Berlin switch block (nil = no fork, 0 = already on berlin) */
+    berlinBlock: string;
+    /** london_block: London switch block (nil = no fork, 0 = already on london) */
+    londonBlock: string;
+    /** arrow_glacier_block: Eip-4345 (bomb delay) switch block (nil = no fork, 0 = already activated) */
+    arrowGlacierBlock: string;
+    /** gray_glacier_block: EIP-5133 (bomb delay) switch block (nil = no fork, 0 = already activated) */
+    grayGlacierBlock: string;
+    /** merge_netsplit_block: Virtual fork after The Merge to use as a network splitter */
+    mergeNetsplitBlock: string;
+    /** shanghai_block switch block (nil = no fork, 0 = already on shanghai) */
+    shanghaiBlock: string;
+    /** cancun_block switch block (nil = no fork, 0 = already on cancun) */
+    cancunBlock: string;
+}
+export interface ChainConfigProtoMsg {
+    typeUrl: "/ethermint.evm.v1.ChainConfig";
+    value: Uint8Array;
+}
+/**
+ * ChainConfig defines the Ethereum ChainConfig parameters using *sdk.Int values
+ * instead of *big.Int.
+ */
+export interface ChainConfigAmino {
+    /** homestead_block switch (nil no fork, 0 = already homestead) */
+    homestead_block: string;
+    /** dao_fork_block corresponds to TheDAO hard-fork switch block (nil no fork) */
+    dao_fork_block: string;
+    /** dao_fork_support defines whether the nodes supports or opposes the DAO hard-fork */
+    dao_fork_support: boolean;
+    /**
+     * eip150_block: EIP150 implements the Gas price changes
+     * (https://github.com/ethereum/EIPs/issues/150) EIP150 HF block (nil no fork)
+     */
+    eip150_block: string;
+    /** eip150_hash: EIP150 HF hash (needed for header only clients as only gas pricing changed) */
+    eip150_hash: string;
+    /** eip155_block: EIP155Block HF block */
+    eip155_block: string;
+    /** eip158_block: EIP158 HF block */
+    eip158_block: string;
+    /** byzantium_block: Byzantium switch block (nil no fork, 0 = already on byzantium) */
+    byzantium_block: string;
+    /** constantinople_block: Constantinople switch block (nil no fork, 0 = already activated) */
+    constantinople_block: string;
+    /** petersburg_block: Petersburg switch block (nil same as Constantinople) */
+    petersburg_block: string;
+    /** istanbul_block: Istanbul switch block (nil no fork, 0 = already on istanbul) */
+    istanbul_block: string;
+    /** muir_glacier_block: Eip-2384 (bomb delay) switch block (nil no fork, 0 = already activated) */
+    muir_glacier_block: string;
+    /** berlin_block: Berlin switch block (nil = no fork, 0 = already on berlin) */
+    berlin_block: string;
+    /** london_block: London switch block (nil = no fork, 0 = already on london) */
+    london_block: string;
+    /** arrow_glacier_block: Eip-4345 (bomb delay) switch block (nil = no fork, 0 = already activated) */
+    arrow_glacier_block: string;
+    /** gray_glacier_block: EIP-5133 (bomb delay) switch block (nil = no fork, 0 = already activated) */
+    gray_glacier_block: string;
+    /** merge_netsplit_block: Virtual fork after The Merge to use as a network splitter */
+    merge_netsplit_block: string;
+    /** shanghai_block switch block (nil = no fork, 0 = already on shanghai) */
+    shanghai_block: string;
+    /** cancun_block switch block (nil = no fork, 0 = already on cancun) */
+    cancun_block: string;
+}
+export interface ChainConfigAminoMsg {
+    type: "/ethermint.evm.v1.ChainConfig";
+    value: ChainConfigAmino;
+}
+/** State represents a single Storage key value pair item. */
+export interface State {
+    /** key is the stored key */
+    key: string;
+    /** value is the stored value for the given key */
+    value: string;
+}
+export interface StateProtoMsg {
+    typeUrl: "/ethermint.evm.v1.State";
+    value: Uint8Array;
+}
+/** State represents a single Storage key value pair item. */
+export interface StateAmino {
+    /** key is the stored key */
+    key: string;
+    /** value is the stored value for the given key */
+    value: string;
+}
+export interface StateAminoMsg {
+    type: "/ethermint.evm.v1.State";
+    value: StateAmino;
+}
+/**
+ * TransactionLogs define the logs generated from a transaction execution
+ * with a given hash. It it used for import/export data as transactions are not
+ * persisted on blockchain state after an upgrade.
+ */
+export interface TransactionLogs {
+    /** hash of the transaction */
+    hash: string;
+    /** logs is an array of Logs for the given transaction hash */
+    logs: Log[];
+}
+export interface TransactionLogsProtoMsg {
+    typeUrl: "/ethermint.evm.v1.TransactionLogs";
+    value: Uint8Array;
+}
+/**
+ * TransactionLogs define the logs generated from a transaction execution
+ * with a given hash. It it used for import/export data as transactions are not
+ * persisted on blockchain state after an upgrade.
+ */
+export interface TransactionLogsAmino {
+    /** hash of the transaction */
+    hash: string;
+    /** logs is an array of Logs for the given transaction hash */
+    logs: LogAmino[];
+}
+export interface TransactionLogsAminoMsg {
+    type: "/ethermint.evm.v1.TransactionLogs";
+    value: TransactionLogsAmino;
+}
+/**
+ * Log represents an protobuf compatible Ethereum Log that defines a contract
+ * log event. These events are generated by the LOG opcode and stored/indexed by
+ * the node.
+ *
+ * NOTE: address, topics and data are consensus fields. The rest of the fields
+ * are derived, i.e. filled in by the nodes, but not secured by consensus.
+ */
+export interface Log {
+    /** address of the contract that generated the event */
+    address: string;
+    /** topics is a list of topics provided by the contract. */
+    topics: string[];
+    /** data which is supplied by the contract, usually ABI-encoded */
+    data: Uint8Array;
+    /** block_number of the block in which the transaction was included */
+    blockNumber: bigint;
+    /** tx_hash is the transaction hash */
+    txHash: string;
+    /** tx_index of the transaction in the block */
+    txIndex: bigint;
+    /** block_hash of the block in which the transaction was included */
+    blockHash: string;
+    /** index of the log in the block */
+    index: bigint;
+    /**
+     * removed is true if this log was reverted due to a chain
+     * reorganisation. You must pay attention to this field if you receive logs
+     * through a filter query.
+     */
+    removed: boolean;
+}
+export interface LogProtoMsg {
+    typeUrl: "/ethermint.evm.v1.Log";
+    value: Uint8Array;
+}
+/**
+ * Log represents an protobuf compatible Ethereum Log that defines a contract
+ * log event. These events are generated by the LOG opcode and stored/indexed by
+ * the node.
+ *
+ * NOTE: address, topics and data are consensus fields. The rest of the fields
+ * are derived, i.e. filled in by the nodes, but not secured by consensus.
+ */
+export interface LogAmino {
+    /** address of the contract that generated the event */
+    address: string;
+    /** topics is a list of topics provided by the contract. */
+    topics: string[];
+    /** data which is supplied by the contract, usually ABI-encoded */
+    data: string;
+    /** block_number of the block in which the transaction was included */
+    block_number: string;
+    /** tx_hash is the transaction hash */
+    tx_hash: string;
+    /** tx_index of the transaction in the block */
+    tx_index: string;
+    /** block_hash of the block in which the transaction was included */
+    block_hash: string;
+    /** index of the log in the block */
+    index: string;
+    /**
+     * removed is true if this log was reverted due to a chain
+     * reorganisation. You must pay attention to this field if you receive logs
+     * through a filter query.
+     */
+    removed: boolean;
+}
+export interface LogAminoMsg {
+    type: "/ethermint.evm.v1.Log";
+    value: LogAmino;
+}
+/** TxResult stores results of Tx execution. */
+export interface TxResult {
+    /**
+     * contract_address contains the ethereum address of the created contract (if
+     * any). If the state transition is an evm.Call, the contract address will be
+     * empty.
+     */
+    contractAddress: string;
+    /** bloom represents the bloom filter bytes */
+    bloom: Uint8Array;
+    /**
+     * tx_logs contains the transaction hash and the proto-compatible ethereum
+     * logs.
+     */
+    txLogs: TransactionLogs;
+    /** ret defines the bytes from the execution. */
+    ret: Uint8Array;
+    /** reverted flag is set to true when the call has been reverted */
+    reverted: boolean;
+    /** gas_used notes the amount of gas consumed while execution */
+    gasUsed: bigint;
+}
+export interface TxResultProtoMsg {
+    typeUrl: "/ethermint.evm.v1.TxResult";
+    value: Uint8Array;
+}
+/** TxResult stores results of Tx execution. */
+export interface TxResultAmino {
+    /**
+     * contract_address contains the ethereum address of the created contract (if
+     * any). If the state transition is an evm.Call, the contract address will be
+     * empty.
+     */
+    contract_address: string;
+    /** bloom represents the bloom filter bytes */
+    bloom: string;
+    /**
+     * tx_logs contains the transaction hash and the proto-compatible ethereum
+     * logs.
+     */
+    tx_logs: TransactionLogsAmino;
+    /** ret defines the bytes from the execution. */
+    ret: string;
+    /** reverted flag is set to true when the call has been reverted */
+    reverted: boolean;
+    /** gas_used notes the amount of gas consumed while execution */
+    gas_used: string;
+}
+export interface TxResultAminoMsg {
+    type: "/ethermint.evm.v1.TxResult";
+    value: TxResultAmino;
+}
+/** AccessTuple is the element type of an access list. */
+export interface AccessTuple {
+    /** address is a hex formatted ethereum address */
+    address: string;
+    /** storage_keys are hex formatted hashes of the storage keys */
+    storageKeys: string[];
+}
+export interface AccessTupleProtoMsg {
+    typeUrl: "/ethermint.evm.v1.AccessTuple";
+    value: Uint8Array;
+}
+/** AccessTuple is the element type of an access list. */
+export interface AccessTupleAmino {
+    /** address is a hex formatted ethereum address */
+    address: string;
+    /** storage_keys are hex formatted hashes of the storage keys */
+    storage_keys: string[];
+}
+export interface AccessTupleAminoMsg {
+    type: "/ethermint.evm.v1.AccessTuple";
+    value: AccessTupleAmino;
+}
+/** TraceConfig holds extra parameters to trace functions. */
+export interface TraceConfig {
+    /** tracer is a custom javascript tracer */
+    tracer: string;
+    /**
+     * timeout overrides the default timeout of 5 seconds for JavaScript-based tracing
+     * calls
+     */
+    timeout: string;
+    /** reexec defines the number of blocks the tracer is willing to go back */
+    reexec: bigint;
+    /** disable_stack switches stack capture */
+    disableStack: boolean;
+    /** disable_storage switches storage capture */
+    disableStorage: boolean;
+    /** debug can be used to print output during capture end */
+    debug: boolean;
+    /** limit defines the maximum length of output, but zero means unlimited */
+    limit: number;
+    /** overrides can be used to execute a trace using future fork rules */
+    overrides?: ChainConfig;
+    /** enable_memory switches memory capture */
+    enableMemory: boolean;
+    /** enable_return_data switches the capture of return data */
+    enableReturnData: boolean;
+    /** tracer_json_config configures the tracer using a JSON string */
+    tracerJsonConfig: string;
+}
+export interface TraceConfigProtoMsg {
+    typeUrl: "/ethermint.evm.v1.TraceConfig";
+    value: Uint8Array;
+}
+/** TraceConfig holds extra parameters to trace functions. */
+export interface TraceConfigAmino {
+    /** tracer is a custom javascript tracer */
+    tracer: string;
+    /**
+     * timeout overrides the default timeout of 5 seconds for JavaScript-based tracing
+     * calls
+     */
+    timeout: string;
+    /** reexec defines the number of blocks the tracer is willing to go back */
+    reexec: string;
+    /** disable_stack switches stack capture */
+    disable_stack: boolean;
+    /** disable_storage switches storage capture */
+    disable_storage: boolean;
+    /** debug can be used to print output during capture end */
+    debug: boolean;
+    /** limit defines the maximum length of output, but zero means unlimited */
+    limit: number;
+    /** overrides can be used to execute a trace using future fork rules */
+    overrides?: ChainConfigAmino;
+    /** enable_memory switches memory capture */
+    enable_memory: boolean;
+    /** enable_return_data switches the capture of return data */
+    enable_return_data: boolean;
+    /** tracer_json_config configures the tracer using a JSON string */
+    tracer_json_config: string;
+}
+export interface TraceConfigAminoMsg {
+    type: "/ethermint.evm.v1.TraceConfig";
+    value: TraceConfigAmino;
+}
+export declare const Params: {
+    typeUrl: string;
+    aminoType: string;
+    is(o: any): o is Params;
+    isAmino(o: any): o is ParamsAmino;
+    encode(message: Params, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): Params;
+    fromPartial(object: DeepPartial<Params>): Params;
+    fromAmino(object: ParamsAmino): Params;
+    toAmino(message: Params): ParamsAmino;
+    fromAminoMsg(object: ParamsAminoMsg): Params;
+    toAminoMsg(message: Params): ParamsAminoMsg;
+    fromProtoMsg(message: ParamsProtoMsg): Params;
+    toProto(message: Params): Uint8Array;
+    toProtoMsg(message: Params): ParamsProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const ChainConfig: {
+    typeUrl: string;
+    is(o: any): o is ChainConfig;
+    isAmino(o: any): o is ChainConfigAmino;
+    encode(message: ChainConfig, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): ChainConfig;
+    fromPartial(object: DeepPartial<ChainConfig>): ChainConfig;
+    fromAmino(object: ChainConfigAmino): ChainConfig;
+    toAmino(message: ChainConfig): ChainConfigAmino;
+    fromAminoMsg(object: ChainConfigAminoMsg): ChainConfig;
+    fromProtoMsg(message: ChainConfigProtoMsg): ChainConfig;
+    toProto(message: ChainConfig): Uint8Array;
+    toProtoMsg(message: ChainConfig): ChainConfigProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const State: {
+    typeUrl: string;
+    is(o: any): o is State;
+    isAmino(o: any): o is StateAmino;
+    encode(message: State, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): State;
+    fromPartial(object: DeepPartial<State>): State;
+    fromAmino(object: StateAmino): State;
+    toAmino(message: State): StateAmino;
+    fromAminoMsg(object: StateAminoMsg): State;
+    fromProtoMsg(message: StateProtoMsg): State;
+    toProto(message: State): Uint8Array;
+    toProtoMsg(message: State): StateProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const TransactionLogs: {
+    typeUrl: string;
+    is(o: any): o is TransactionLogs;
+    isAmino(o: any): o is TransactionLogsAmino;
+    encode(message: TransactionLogs, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): TransactionLogs;
+    fromPartial(object: DeepPartial<TransactionLogs>): TransactionLogs;
+    fromAmino(object: TransactionLogsAmino): TransactionLogs;
+    toAmino(message: TransactionLogs): TransactionLogsAmino;
+    fromAminoMsg(object: TransactionLogsAminoMsg): TransactionLogs;
+    fromProtoMsg(message: TransactionLogsProtoMsg): TransactionLogs;
+    toProto(message: TransactionLogs): Uint8Array;
+    toProtoMsg(message: TransactionLogs): TransactionLogsProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const Log: {
+    typeUrl: string;
+    is(o: any): o is Log;
+    isAmino(o: any): o is LogAmino;
+    encode(message: Log, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): Log;
+    fromPartial(object: DeepPartial<Log>): Log;
+    fromAmino(object: LogAmino): Log;
+    toAmino(message: Log): LogAmino;
+    fromAminoMsg(object: LogAminoMsg): Log;
+    fromProtoMsg(message: LogProtoMsg): Log;
+    toProto(message: Log): Uint8Array;
+    toProtoMsg(message: Log): LogProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const TxResult: {
+    typeUrl: string;
+    is(o: any): o is TxResult;
+    isAmino(o: any): o is TxResultAmino;
+    encode(message: TxResult, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): TxResult;
+    fromPartial(object: DeepPartial<TxResult>): TxResult;
+    fromAmino(object: TxResultAmino): TxResult;
+    toAmino(message: TxResult): TxResultAmino;
+    fromAminoMsg(object: TxResultAminoMsg): TxResult;
+    fromProtoMsg(message: TxResultProtoMsg): TxResult;
+    toProto(message: TxResult): Uint8Array;
+    toProtoMsg(message: TxResult): TxResultProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const AccessTuple: {
+    typeUrl: string;
+    is(o: any): o is AccessTuple;
+    isAmino(o: any): o is AccessTupleAmino;
+    encode(message: AccessTuple, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): AccessTuple;
+    fromPartial(object: DeepPartial<AccessTuple>): AccessTuple;
+    fromAmino(object: AccessTupleAmino): AccessTuple;
+    toAmino(message: AccessTuple): AccessTupleAmino;
+    fromAminoMsg(object: AccessTupleAminoMsg): AccessTuple;
+    fromProtoMsg(message: AccessTupleProtoMsg): AccessTuple;
+    toProto(message: AccessTuple): Uint8Array;
+    toProtoMsg(message: AccessTuple): AccessTupleProtoMsg;
+    registerTypeUrl(): void;
+};
+export declare const TraceConfig: {
+    typeUrl: string;
+    is(o: any): o is TraceConfig;
+    isAmino(o: any): o is TraceConfigAmino;
+    encode(message: TraceConfig, writer?: BinaryWriter): BinaryWriter;
+    decode(input: BinaryReader | Uint8Array, length?: number): TraceConfig;
+    fromPartial(object: DeepPartial<TraceConfig>): TraceConfig;
+    fromAmino(object: TraceConfigAmino): TraceConfig;
+    toAmino(message: TraceConfig): TraceConfigAmino;
+    fromAminoMsg(object: TraceConfigAminoMsg): TraceConfig;
+    fromProtoMsg(message: TraceConfigProtoMsg): TraceConfig;
+    toProto(message: TraceConfig): Uint8Array;
+    toProtoMsg(message: TraceConfig): TraceConfigProtoMsg;
+    registerTypeUrl(): void;
+};