@wjwjq/release-helper 0.1.0 → 0.1.1

package/dist/deploy/nginx/script/common.sh

@@ -1,178 +0,0 @@
-#!/bin/bash
-# 获取脚本的父目录
-project_path=$(echo "$basepath" | sed -e "s/\/script//")
-
-execute_log_path="/var/log/nginx_script_execute_logs"
-
-log() {
-  now=$(date "+%Y-%m-%d %H:%M:%S")
-  echo "$now: $1"
-  echo "$now: [info] $1" >>$execute_log_path
-}
-
-log_success() {
-  now=$(date "+%Y-%m-%d %H:%M:%S")
-  echo "$(tput setaf 2)""$now": "$1""$(tput sgr0)"
-  echo "$now: [success] $1" >>$execute_log_path
-}
-
-log_error() {
-  now=$(date "+%Y-%m-%d %H:%M:%S")
-  echo "$(tput setaf 1)""$now": "$1" "$(tput sgr0)"
-  echo "$now: [error] $1" >>$execute_log_path
-}
-
-source "$basepath"/prompt.sh
-
-# 指定安装目录
-install_path="$prefix/etc/nginx/"
-
-mkdir -p "$install_path"
-
-# 安装包所在路径
-pkg_path="${project_path}/pkg"
-
-# # 配置文件所在路径
-# conf_path="${pkg_path}/conf/nginx.conf"
-
-# # asset_path="$prefix/opt/posidon-frontend/"
-# log_path="/var/log/nginx"
-# log_file="nginx.log"
-# pid_path="/var/run/nginx.pid"
-
-# conf_version=$(awk '{print $1}' "${pkg_path}"/conf/version)
-# echo $conf_version
-
-# copy_conf_and_write_verison() {
-#   access_log_super="access_log /dev/stdout main"
-#   error_log_super="error_log /dev/stderr warn"
-#   access_log="access_log $log_path/$log_file main"
-#   error_log="error_log $log_path/$log_file"
-
-#   pid_file="pid  $pid_path"
-
-#   exec=$(get_exec_path)
-
-#   if [ -f "${install_path}nginx.conf" ]; then
-#     old_version=$(sed -n '1p' "${install_path}"nginx.conf | sed 's/# version: //' | sed "s/\s\+//g")
-
-#     if [[ -n "${old_version}" ]]; then
-#       now=$(date "+%Y-%m-%d_%H:%M:%S")
-
-#       # echo "nginx_"$old_version"_"$now".conf"
-#       mv "${install_path}"nginx.conf "${install_path}"/nginx_"$old_version"_"$now".conf
-#     fi
-#   fi
-
-#   #nginx -v  nginx代码内部使用的stderr输出， 此处需要转换为stdout
-#   nginx_version=$($exec -v 2>&1)
-
-#   cp "$conf_path" ./
-
-#   sed -i "1i\# ${nginx_version}" ./nginx.conf
-#   sed -i "1i\# version: ${conf_version}" ./nginx.conf
-
-#   if [[ -n "${prefix}" ]]; then
-#     n=$(grep -wn "mime.types" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#     sed -i "${n}c include  conf/mime.types;" ./nginx.conf
-#   fi
-
-#   # n=$(grep -wn "__root__" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   # if [[ -n "${n}" ]]; then
-#   #   sed -i "${n}c root ${asset_path};" ./nginx.conf
-#   # fi
-
-#   # 替换日志输出路径方式
-#   n=$(grep -wn "#ERROR_LOG_PLACEHOLDER" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     if ((mode == 2)); then
-#       sed -i "${n}c ${error_log};" ./nginx.conf
-#     else
-#       sed -i "${n}c ${error_log_super};" ./nginx.conf
-#     fi
-#   fi
-
-#   n=$(grep -wn "#ACCESS_LOG_PLACEHOLDER" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     if ((mode == 2)); then
-#       sed -i "${n}c ${access_log};" ./nginx.conf
-#     else
-#       sed -i "${n}c ${access_log_super};" ./nginx.conf
-#     fi
-#   fi
-
-#   n=$(grep -wn "#PID_FILE_PALCEHOLDER" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     # 非supervisorctl
-#     if ((mode == 2)); then
-#       sed -i "${n}c ${pid_file};" ./nginx.conf
-#     fi
-#   fi
-
-#   n=$(grep -wn "daemon off;" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     # 非supervisorctl
-#     if ((mode == 2)); then
-#       sed -i "${n}c daemon on;" ./nginx.conf
-#     fi
-#   fi
-
-#   mv -fb "./nginx.conf" "$install_path"
-
-#   cp -fR "$pkg_path"/conf/ca "$install_path"
-
-#   mkdir -p /data/command/
-#   log "nginx start command: $exec -c  ${install_path}nginx.conf"
-#   echo "$exec -c  ${install_path}nginx.conf" >/data/command/nginx
-
-#   if [[ $? == 0 ]]; then
-#     log_success "$conf_version nginx.conf replaced successfully!"
-#   else
-#     log_error "$conf_version nginx.conf replaced failed!"
-#   fi
-# }
-
-# get_exec_path() {
-#   cmd=''
-#   if [[ -n "${prefix}" ]]; then
-#     cmd="${install_path}/sbin/nginx"
-#   else
-#     cmd="/usr/sbin/nginx"
-#   fi
-
-#   echo "$cmd"
-# }
-
-# get_exec_cmd() {
-#   exec=$(get_exec_path)
-
-#   echo "$exec -c  ${install_path}nginx.conf"
-# }
-
-# add_service() {
-#   #添加到服务
-#   exec_cmd=$(get_exec_cmd)
-#   cp "$basepath"/../pkg/conf/nginx.service.tpl ./nginx.service
-
-#   conf_path="${install_path}nginx.conf"
-#   check_cmd="$exec -t -c $conf_path"
-#   version=$(echo "$conf_version" | grep -oP '\d+\.\d+\.\d+')
-
-#   sed -i "s#_exec_cmd_#$exec_cmd#g" ./nginx.service
-#   sed -i "s#_log_path_#$log_path#g" ./nginx.service
-#   sed -i "s#_log_file_#$log_file#g" ./nginx.service
-#   sed -i "s#_conf_path_#$conf_path#g" ./nginx.service
-#   sed -i "s#_version_#$version#g" ./nginx.service
-#   sed -i "s#_pid_file_#$pid_path#g" ./nginx.service
-#   sed -i "s#_start_check_#$check_cmd#g" ./nginx.service
-
-#   if ((mode == 2)); then
-#     # systemctl enable nginx
-#     cp ./nginx.service /usr/lib/systemd/system/
-#     systemctl daemon-reload
-
-#     log_success 'add nginx.service to /usr/lib/systemd/system/'
-#   else
-#     rm -rf /usr/lib/systemd/system/nginx.service
-#   fi
-# }

package/dist/deploy/nginx/script/compile.sh

@@ -1,11 +0,0 @@
-# see https://webhostinggeeks.com/howto/install-update-openssl-centos/
-# serr https://blog.51cto.com/u_13890591/5686850
-
-yum -y update
-
-yum install -y make gcc perl-core pcre-devel wget zlib-devel
-
-wget https://ftp.openssl.org/source/openssl-xxxk.tar.gz
-
-
-./configure --with-http_ssl_module --with-http_gzip_static_module  --with-http_stub_status_module --with-stream --with-http_v2_module --with-openssl=/root/openssl-1.1.1f --prefix=/etc/nginx

package/dist/deploy/nginx/script/fix.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-# 获取脚本所在的目录
-basepath=$(dirname "$(realpath "${BASH_SOURCE[-1]}")")
-
- 
-source $basepath/common.sh
-
-tar -zxvhf "$pkg_path"/nginx-binary*.tar.gz -C $install_path --strip-components 1
-
-if [[ -z "${prefix}" ]]; then
-  cp "$install_path"/sbin/nginx  /usr/sbin/
-fi
-
-# 检测是否安装成功
-if [[ $? == 0 ]]; then
-  echo "$(tput setaf 2)"nginx fixed"$(tput sgr0)"
-
-
-  "$install_path"nginx -v
-
-else
-
-  echo "$(tput setaf 1)"nginx installation failed!"$(tput sgr0)"
-fi

package/dist/deploy/nginx/script/https.sh

@@ -1,79 +0,0 @@
-#!/bin/bash
-
-COUNTRY="CN"
-PROVINCE="SC"
-CITY="CD"
-ORG="HX"
-OU="HXWX"
-emailAddress="hxwxgroup@qq.com"
-
-get_subj () {
-  echo "/C=$COUNTRY/ST=$PROVINCE/L=$CITY/O=$ORG/OU=$OU/CN=$1/emailAddress=$emailAddress"
-}
-
-if [ ! -f "/etc/pki/CA/index.txt" ]; then
-  touch /etc/pki/CA/index.txt
-fi
-
-if [ ! -f "/etc/pki/CA/serial" ]; then
-  echo 01 >/etc/pki/CA/serial
-fi
-
-# ca
-echo "---------------------generate ca------------------"
-openssl genrsa -des3 -out ca.key 4096
-
-read -rep "Please input ca DOMAIN: " -i "HXWXGROUP" CA_GRPUP_DOMAIN
-
-
-subj=$(get_subj $CA_GRPUP_DOMAIN)
-
-openssl req -new -x509 -days 3650 -key ca.key -out ca.crt -subj $subj
-
-if [[ $? == 0 ]]; then
-  echo "$(tput setaf 2)"---------------------generate ca done------------------!"$(tput sgr0)"
-else
-  echo "$(tput setaf 1)"---------------------generate ca failed------------------"$(tput sgr0)"
-  exit 1
-fi
- 
-# 服务端
-echo "---------------------generate  server ca------------------"
-openssl genrsa -des3 -out server.pem 2048
-
-openssl rsa -in server.pem -out server.key
-
-read -rep "Please input server DOMAIN: " -i "www.cdsp.com" SERVER_DOMAIN
-
-subj=$(get_subj $SERVER_DOMAIN)
-# echo $subj #"/C=CN/ST=SC/L=CD/O=HX/OU=HXWX/CN=www.cdsp.com/emailAddress=''"
-openssl req -new -key server.pem -out server.csr -subj $subj
-
-if [[ $? == 0 ]]; then
-  openssl ca -policy policy_anything -days 3650 -cert ca.crt -keyfile ca.key -in server.csr -out server.crt
-  echo "$(tput setaf 2)"---------------------generate server ca done------------------!"$(tput sgr0)"
-else
-  echo "$(tput setaf 1)"---------------------generate server ca failed------------------"$(tput sgr0)"
-  exit 1
-fi
- 
-# 客户端
-echo "---------------------generate  client ca------------------"
-openssl genrsa -des3 -out client.pem 2048
-
-read -rep "Please input client DOMAIN: " -i "HXWXcdspCLIENT" CLIENT_DOMAIN
-
-subj=$(get_subj $CLIENT_DOMAIN)
-
-openssl req -new -key client.pem -out client.csr -subj $subj
-
-if [[ $? == 0 ]]; then
-  openssl ca -policy policy_anything -days 3650 -cert ca.crt -keyfile ca.key -in client.csr -out client.crt
-
-  openssl pkcs12 -export -clcerts -in client.crt -inkey client.pem -out client.p12
-
-  echo "$(tput setaf 2)"---------------------generate client ca done------------------!"$(tput sgr0)"
-else
-  echo "$(tput setaf 1)"---------------------generate client ca failed------------------"$(tput sgr0)"
-  exit 1
-fi

package/dist/deploy/nginx/script/install.sh

@@ -1,95 +0,0 @@
-#!/bin/bash
-# 获取脚本所在的目录
-basepath=$(dirname "$(realpath "${BASH_SOURCE[-1]}")")
-
-source "$basepath"/common.sh
-
-open_port_80() {
-  # 查看防火墙是否开启
-  systemctl status firewalld
-  # 若未开启则开启
-  systemctl start firewalld
-
-  # 查看所有开启的端口
-  #firewall-cmd --list-ports
-
-  # 开启nginx默认80端口（关键步骤一）
-  firewall-cmd --zone=public --add-port=80/tcp --permanent
-
-  # 重启防火墙（关键步骤二）
-  firewall-cmd --reload
-}
-
-rpm_install() {
-  installed=$(rpm -qa | grep -i nginx)
-
-  if [[ -n "${installed}" ]]; then
-    rpm -e "$installed"
-  fi
-
-  rpm -Uivh "$pkg_path"/nginx*.rpm
-}
-
-install_from_sourcecode() {
-  tar -zxvhf "$pkg_path/nginx-1.20.2.tar.gz"
-  (
-    cd ./nginx-1.20.2 || exit
-    sudo ./configure --prefix="$install_path" --with-http_ssl_module --with-http_v2_module
-    make && make install
-  )
-}
-
-# 安装
-install() {
-  log "install nginx to path: ${install_path}"
-
-  arch=$(uname -m)
-  ssl_version=$(openssl version | grep -oP '\d+\.\d+' | sed -n '1p' 2>&1)
-
-  if [[ -z "${arch}" ]]; then
-    arch="x86_64"
-  fi
-
-  if [[ $arch == arm* ]] || [[ $arch = aarch64 ]]; then
-    arch="arm"
-  fi
-
-  if [[ "${ssl_version}" == "1.0" ]]; then
-    ssl_version="1.0.2"
-  fi
-
-  if [[ "${ssl_version}" == "1.1" ]]; then
-    ssl_version="1.1.1"
-  fi
-
-  if [[ "${ssl_version}" == "3.0" ]]; then
-    ssl_version="3.0.7"
-  fi
-
-  if [[ -z "${ssl_version}" ]]; then
-    ssl_version="1.0.2"
-  fi
-
-  pkg="$pkg_path"/nginx-"$arch"-ssl"$ssl_version".tar.gz
-
-  if [ ! -f "$pkg" ]; then
-    log_error "Fatal error: nginx-$arch-ssl$ssl_version.tar.gz not matched!  contact developer!"
-    exit 1
-  fi
-
-  log "current arch: $arch, current ssl_version： $ssl_version"
-
-  tar -zxvhf "$pkg" -C "$install_path" --strip-components 1
-
-  cp "$install_path"nginx /usr/sbin/
-
-  # 检测是否安装成功
-  if [[ $? == 0 ]]; then
-    log_success "nginx installation successfully!"
-  else
-    log_error "nginx installation failed!"
-  fi
-}
-
-install
-log '------------- done ------------------------'

package/dist/deploy/nginx/script/prompt.sh

@@ -1,10 +0,0 @@
-#!/bin/bash
-prefix=""
-
-# if [[ -z "${prefix}" ]]; then
-
-#   read -r -p "Input installation or upgrade path: (default: /etc/nginx/)" prefix
-#   prefix=${prefix:-''}
-# fi
-
-# echo "install/upgrade prefix: $prefix"

package/dist/deploy/nginx/script/upgrade.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-# 获取脚本所在的目录
-basepath=$(dirname "$(realpath "${BASH_SOURCE[-1]}")")
-
-source "$basepath"/common.sh
-
-log '------------- done ------------------------'

package/src/deploy/nginx/README.md

@@ -1 +0,0 @@
-# nginx

package/src/deploy/nginx/script/common.sh

@@ -1,178 +0,0 @@
-#!/bin/bash
-# 获取脚本的父目录
-project_path=$(echo "$basepath" | sed -e "s/\/script//")
-
-execute_log_path="/var/log/nginx_script_execute_logs"
-
-log() {
-  now=$(date "+%Y-%m-%d %H:%M:%S")
-  echo "$now: $1"
-  echo "$now: [info] $1" >>$execute_log_path
-}
-
-log_success() {
-  now=$(date "+%Y-%m-%d %H:%M:%S")
-  echo "$(tput setaf 2)""$now": "$1""$(tput sgr0)"
-  echo "$now: [success] $1" >>$execute_log_path
-}
-
-log_error() {
-  now=$(date "+%Y-%m-%d %H:%M:%S")
-  echo "$(tput setaf 1)""$now": "$1" "$(tput sgr0)"
-  echo "$now: [error] $1" >>$execute_log_path
-}
-
-source "$basepath"/prompt.sh
-
-# 指定安装目录
-install_path="$prefix/etc/nginx/"
-
-mkdir -p "$install_path"
-
-# 安装包所在路径
-pkg_path="${project_path}/pkg"
-
-# # 配置文件所在路径
-# conf_path="${pkg_path}/conf/nginx.conf"
-
-# # asset_path="$prefix/opt/posidon-frontend/"
-# log_path="/var/log/nginx"
-# log_file="nginx.log"
-# pid_path="/var/run/nginx.pid"
-
-# conf_version=$(awk '{print $1}' "${pkg_path}"/conf/version)
-# echo $conf_version
-
-# copy_conf_and_write_verison() {
-#   access_log_super="access_log /dev/stdout main"
-#   error_log_super="error_log /dev/stderr warn"
-#   access_log="access_log $log_path/$log_file main"
-#   error_log="error_log $log_path/$log_file"
-
-#   pid_file="pid  $pid_path"
-
-#   exec=$(get_exec_path)
-
-#   if [ -f "${install_path}nginx.conf" ]; then
-#     old_version=$(sed -n '1p' "${install_path}"nginx.conf | sed 's/# version: //' | sed "s/\s\+//g")
-
-#     if [[ -n "${old_version}" ]]; then
-#       now=$(date "+%Y-%m-%d_%H:%M:%S")
-
-#       # echo "nginx_"$old_version"_"$now".conf"
-#       mv "${install_path}"nginx.conf "${install_path}"/nginx_"$old_version"_"$now".conf
-#     fi
-#   fi
-
-#   #nginx -v  nginx代码内部使用的stderr输出， 此处需要转换为stdout
-#   nginx_version=$($exec -v 2>&1)
-
-#   cp "$conf_path" ./
-
-#   sed -i "1i\# ${nginx_version}" ./nginx.conf
-#   sed -i "1i\# version: ${conf_version}" ./nginx.conf
-
-#   if [[ -n "${prefix}" ]]; then
-#     n=$(grep -wn "mime.types" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#     sed -i "${n}c include  conf/mime.types;" ./nginx.conf
-#   fi
-
-#   # n=$(grep -wn "__root__" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   # if [[ -n "${n}" ]]; then
-#   #   sed -i "${n}c root ${asset_path};" ./nginx.conf
-#   # fi
-
-#   # 替换日志输出路径方式
-#   n=$(grep -wn "#ERROR_LOG_PLACEHOLDER" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     if ((mode == 2)); then
-#       sed -i "${n}c ${error_log};" ./nginx.conf
-#     else
-#       sed -i "${n}c ${error_log_super};" ./nginx.conf
-#     fi
-#   fi
-
-#   n=$(grep -wn "#ACCESS_LOG_PLACEHOLDER" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     if ((mode == 2)); then
-#       sed -i "${n}c ${access_log};" ./nginx.conf
-#     else
-#       sed -i "${n}c ${access_log_super};" ./nginx.conf
-#     fi
-#   fi
-
-#   n=$(grep -wn "#PID_FILE_PALCEHOLDER" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     # 非supervisorctl
-#     if ((mode == 2)); then
-#       sed -i "${n}c ${pid_file};" ./nginx.conf
-#     fi
-#   fi
-
-#   n=$(grep -wn "daemon off;" ./nginx.conf | awk -F: '{print $1}' | sed -n 1p)
-#   if [[ -n "${n}" ]]; then
-#     # 非supervisorctl
-#     if ((mode == 2)); then
-#       sed -i "${n}c daemon on;" ./nginx.conf
-#     fi
-#   fi
-
-#   mv -fb "./nginx.conf" "$install_path"
-
-#   cp -fR "$pkg_path"/conf/ca "$install_path"
-
-#   mkdir -p /data/command/
-#   log "nginx start command: $exec -c  ${install_path}nginx.conf"
-#   echo "$exec -c  ${install_path}nginx.conf" >/data/command/nginx
-
-#   if [[ $? == 0 ]]; then
-#     log_success "$conf_version nginx.conf replaced successfully!"
-#   else
-#     log_error "$conf_version nginx.conf replaced failed!"
-#   fi
-# }
-
-# get_exec_path() {
-#   cmd=''
-#   if [[ -n "${prefix}" ]]; then
-#     cmd="${install_path}/sbin/nginx"
-#   else
-#     cmd="/usr/sbin/nginx"
-#   fi
-
-#   echo "$cmd"
-# }
-
-# get_exec_cmd() {
-#   exec=$(get_exec_path)
-
-#   echo "$exec -c  ${install_path}nginx.conf"
-# }
-
-# add_service() {
-#   #添加到服务
-#   exec_cmd=$(get_exec_cmd)
-#   cp "$basepath"/../pkg/conf/nginx.service.tpl ./nginx.service
-
-#   conf_path="${install_path}nginx.conf"
-#   check_cmd="$exec -t -c $conf_path"
-#   version=$(echo "$conf_version" | grep -oP '\d+\.\d+\.\d+')
-
-#   sed -i "s#_exec_cmd_#$exec_cmd#g" ./nginx.service
-#   sed -i "s#_log_path_#$log_path#g" ./nginx.service
-#   sed -i "s#_log_file_#$log_file#g" ./nginx.service
-#   sed -i "s#_conf_path_#$conf_path#g" ./nginx.service
-#   sed -i "s#_version_#$version#g" ./nginx.service
-#   sed -i "s#_pid_file_#$pid_path#g" ./nginx.service
-#   sed -i "s#_start_check_#$check_cmd#g" ./nginx.service
-
-#   if ((mode == 2)); then
-#     # systemctl enable nginx
-#     cp ./nginx.service /usr/lib/systemd/system/
-#     systemctl daemon-reload
-
-#     log_success 'add nginx.service to /usr/lib/systemd/system/'
-#   else
-#     rm -rf /usr/lib/systemd/system/nginx.service
-#   fi
-# }

package/src/deploy/nginx/script/compile.sh

@@ -1,11 +0,0 @@
-# see https://webhostinggeeks.com/howto/install-update-openssl-centos/
-# serr https://blog.51cto.com/u_13890591/5686850
-
-yum -y update
-
-yum install -y make gcc perl-core pcre-devel wget zlib-devel
-
-wget https://ftp.openssl.org/source/openssl-xxxk.tar.gz
-
-
-./configure --with-http_ssl_module --with-http_gzip_static_module  --with-http_stub_status_module --with-stream --with-http_v2_module --with-openssl=/root/openssl-1.1.1f --prefix=/etc/nginx

package/src/deploy/nginx/script/fix.sh

@@ -1,24 +0,0 @@
-#!/bin/bash
-# 获取脚本所在的目录
-basepath=$(dirname "$(realpath "${BASH_SOURCE[-1]}")")
-
- 
-source $basepath/common.sh
-
-tar -zxvhf "$pkg_path"/nginx-binary*.tar.gz -C $install_path --strip-components 1
-
-if [[ -z "${prefix}" ]]; then
-  cp "$install_path"/sbin/nginx  /usr/sbin/
-fi
-
-# 检测是否安装成功
-if [[ $? == 0 ]]; then
-  echo "$(tput setaf 2)"nginx fixed"$(tput sgr0)"
-
-
-  "$install_path"nginx -v
-
-else
-
-  echo "$(tput setaf 1)"nginx installation failed!"$(tput sgr0)"
-fi