@wix/agent-skills 1.36.0 → 1.36.1

package/skills/wix-replatform/resources/rp-target-wix/lib/coupon-redemption-drift.js

@@ -1,491 +0,0 @@
-'use strict';
-
-// A spent coupon must not import redeemable, and a migrated coupon must be identifiable.
-//
-// A bearer voucher is money: a fixed amount off, single use, no scope, no minimum, no expiry.
-// Whoever holds the code can spend it. rp-source-wordpress/lib/coupon-discovery.js already gets
-// the STATIC rule right (exhausted at capture -> imported inactive, because Wix starts its own
-// usage count at zero). This module covers the TEMPORAL half, which nothing else does:
-//
-//   * the snapshot the import reads is dated, and a stale one is refused rather than imported;
-//   * a voucher spent between capture and write is not written at all;
-//   * a voucher spent AFTER the import is reconciled at cutover against a fresh source read.
-//
-// THE UPDATE RULE, measured live against a disposable store with throwaway codes, all deleted
-// afterwards. Update Coupon WORKS, and the trap is the request shape:
-//
-//   PATCH /stores/v2/coupons/{id}
-//     body { specification: { active: false } }  + fieldMask                 -> WRITES
-//       fieldMask may be `?fieldMask=active`, `?fieldMask.paths=active`, or body
-//       `fieldMask: { paths: ['active'] }`. Paths are specification field names (`active`,
-//       `tags`) WITHOUT a `specification.` prefix -- `specification.active` 500s.
-//     body { specification: { active: false } }  with NO fieldMask           -> 400, named clearly
-//     body { specification: <THE WHOLE SPEC>  }  + fieldMask: ['active']     -> 200, body {}, NO-OP
-//
-// THAT LAST LINE IS THE WHOLE HAZARD. Send only the fields being changed. Sending the full
-// specification alongside a narrow field mask is accepted with 200 and an empty body and changes
-// nothing -- re-read at +15s, +45s and +150s confirmed no change, which is far longer than this
-// surface's own read lag. A repair pass built that way reports thousands of vouchers closed while
-// every one stays spendable: a false pass on money. Hence verifyRemedyApplied below, which
-// refuses to call any 2xx an applied remedy without a post-settle read-back.
-//
-// PUT /stores/v2/coupons/{id} is 404 (no such route) and there is no v3 coupons surface.
-// DELETE /stores/v2/coupons/{id} works (200, gone within ~4s), and a deleted CODE can be
-// re-created -- but re-creating mints a new coupon id, so deactivating in place is preferred.
-//
-// One call can set `active` and `tags` together: `?fieldMask=active,tags`. Verified.
-//
-// Pure: no I/O, no clock of its own. Every function takes `now` and the already-read data, so the
-// same inputs always give the same verdict.
-
-const OUTCOMES = Object.freeze({
-  // Pre-write.
-  WRITE_OK: 'voucher-still-redeemable-at-write',
-  SPENT_AFTER_CAPTURE: 'coupons-spent-after-capture',
-  UNDECIDABLE: 'voucher-usage-unknown-at-write',
-  PRECISION_UNSUPPORTED: 'voucher-face-value-precision-unsupported',
-  // Post-import.
-  RECONCILED_MATCH: 'voucher-drift-reconciled',
-  REMEDY_PENDING: 'voucher-drift-remedy-pending',
-  SOURCE_GONE: 'voucher-source-row-missing',
-  TARGET_GONE: 'voucher-target-row-missing',
-  TARGET_STATE_UNREADABLE: 'voucher-target-state-unreadable',
-});
-
-// The remedies the platform actually offers, in preference order. DEACTIVATE is first because it
-// keeps the coupon id, the code, the dates and the amount -- the merchant keeps a readable record
-// of a voucher that can no longer be cashed, and nothing that referenced the coupon id is
-// orphaned. DELETE stays available because it is the only option if a code must disappear
-// entirely; note it frees the code for re-creation but mints a new id.
-const REMEDY = Object.freeze({
-  DEACTIVATE: 'deactivate-on-target',
-  DELETE: 'delete-on-target',
-  NONE: 'no-action-needed',
-  ASK: 'owner-decision-required',
-});
-
-// The tag vocabulary, frozen here so two passes cannot invent variants of the same word. `tags` is a real validated field on the coupon specification
-// (array<string>, max 100 items, max 255 chars each) and it is settable at create AND updatable
-// in place through the same minimal-specification PATCH as `active`.
-const TAGS = Object.freeze({
-  IMPORTED: 'Imported',
-  ALREADY_USED: 'Already_Used',
-  PARTIALLY_USED: 'Partially_Used',
-  DISABLED_AT_SOURCE: 'Disabled_At_Source',
-});
-const KNOWN_TAGS = Object.freeze(Object.values(TAGS));
-
-const SNAPSHOT = Object.freeze({
-  FRESH: 'snapshot-fresh',
-  STALE: 'snapshot-stale',
-  UNDATED: 'snapshot-undated',
-});
-
-// A usage LIMIT: 0, '' and null all mean UNLIMITED in WooCommerce, never "no uses allowed".
-// The source adapter already applies this; repeating it here is deliberate, because this module
-// re-reads the source directly and a limit that changed to unlimited between the two reads came
-// back as 0 and read as "exhausted" -- proposing to switch off a coupon the merchant had just
-// made unlimited.
-function usageLimitOrUnlimited(value) {
-  const n = integerOrNull(value);
-  return n === null || n === 0 ? null : n;
-}
-
-function integerOrNull(value) {
-  if (value === undefined || value === null || value === '') return null;
-  const text = String(value).trim();
-  if (!/^\d+$/.test(text)) return null;
-  return Number(text);
-}
-
-function epochMsOrNull(value) {
-  if (value === undefined || value === null || value === '') return null;
-  if (typeof value === 'number') return Number.isFinite(value) ? value : null;
-  const text = String(value).trim();
-  if (/^\d+$/.test(text)) return Number(text);
-  // WooCommerce `*_gmt` fields carry no timezone suffix and are UTC. Same rule as
-  // coupon-discovery.js, repeated here rather than imported: this module must not depend on a
-  // source adapter.
-  const iso = /[zZ]|[+-]\d\d:?\d\d$/.test(text) ? text : `${text}Z`;
-  const parsed = Date.parse(iso);
-  return Number.isFinite(parsed) ? parsed : null;
-}
-
-// Money is carried EXACTLY, never rounded into shape. `Number(text).toFixed(2)` turns a source
-// value of 19.999 into 20.00 and 1.004 into 1.00, and a reconciliation built on that reports a
-// source and a target that differ as equal -- false verified equality on money, which is the one
-// result a reconciliation must never produce. So: parse, keep every digit, and count the decimal
-// places so a caller can refuse what the target cannot represent rather than round into it.
-function exactAmount(value) {
-  const text = value === undefined || value === null ? '' : String(value).trim();
-  if (!/^-?\d+(\.\d+)?$/.test(text)) return null;
-  const bare = text.startsWith('-') ? text.slice(1) : text;
-  const [whole, frac = ''] = bare.split('.');
-  const trimmed = frac.replace(/0+$/, '');
-  return {
-    // Canonical, and lossless: trailing zeros are not precision, so 150.00 and 150 are one value.
-    exact: trimmed ? `${String(BigInt(whole))}.${trimmed}` : String(BigInt(whole)),
-    decimals: trimmed.length,
-  };
-}
-
-// The target stores money to 2 decimal places. More than that is not a rounding decision we get
-// to make on the merchant's behalf -- it is a value the target cannot hold, and it is reported.
-const TARGET_DECIMALS = 2;
-
-// Minor units as a BigInt, so a total of thousands of coupons cannot drift the way a float sum
-// does. Returns null when any value carries precision the target cannot represent.
-function toMinorUnits(amount) {
-  const parsed = exactAmount(amount);
-  if (parsed === null || parsed.decimals > TARGET_DECIMALS) return null;
-  const [whole, frac = ''] = parsed.exact.split('.');
-  return BigInt(whole) * 100n + BigInt((frac + '00').slice(0, 2));
-}
-// How a face value is REPORTED. Representable amounts render as money (two places, so 150 and
-// 150.00 read alike); anything the target cannot hold keeps every digit it came with, so the gap
-// names the real value rather than a tidied one.
-function displayAmount(value) {
-  const parsed = exactAmount(value);
-  if (parsed === null) return null;
-  if (parsed.decimals > TARGET_DECIMALS) return parsed.exact;
-  return minorUnitsToDecimal(toMinorUnits(parsed.exact));
-}
-
-function minorUnitsToDecimal(minor) {
-  const negative = minor < 0n;
-  const abs = negative ? -minor : minor;
-  return `${negative ? '-' : ''}${abs / 100n}.${String(abs % 100n).padStart(2, '0')}`;
-}
-
-// Narrowed to bearer vouchers. A bearer voucher is the money-instrument shape and NOT every coupon:
-// a percentage promo re-imported after being spent is a discount someone gets twice, which does
-// not earn a per-coupon fresh read. Reads a WooCommerce coupon row.
-function isBearerVoucher(coupon) {
-  if (!coupon || typeof coupon !== 'object') return false;
-  const type = String(coupon.discount_type || '').trim();
-  if (type !== 'fixed_cart') return false;
-  if (coupon.free_shipping === true) return false;
-  // Minor units, not a float: "is there a money amount here" must not depend on parsing money
-  // through a double. A value too precise for the target is still a money amount -- the narrowing
-  // decides what KIND of coupon this is; the precision gap is reported elsewhere.
-  const parsed = exactAmount(coupon.amount);
-  if (parsed === null || BigInt(parsed.exact.replace('.', '').replace(/^0+(?=\d)/, '') || '0') === 0n) return false;
-  const scoped = (Array.isArray(coupon.product_ids) && coupon.product_ids.length > 0)
-    || (Array.isArray(coupon.product_categories) && coupon.product_categories.length > 0);
-  if (scoped) return false;
-  const minimum = exactAmount(coupon.minimum_amount);
-  if (minimum !== null && BigInt(minimum.exact.replace('.', '').replace(/^0+(?=\d)/, '') || '0') > 0n) return false;
-  // Single use is what makes it a bearer instrument rather than a standing promo. `usage_limit`
-  // 0 or empty is UNLIMITED in WooCommerce (the trap coupon-discovery.js documents), so an
-  // unlimited code is explicitly NOT a voucher.
-  return integerOrNull(coupon.usage_limit) === 1;
-}
-
-// A snapshot that cannot be dated is refused exactly like a stale one: "we do not
-// know when this was captured" and "this was captured too long ago" are the same risk for a money
-// instrument, and neither may be treated as fresh.
-function classifySnapshot({ capturedAt, now, maxAgeMs } = {}) {
-  const captured = epochMsOrNull(capturedAt);
-  const at = epochMsOrNull(now);
-  if (at === null) throw new Error('classifySnapshot needs `now`');
-  if (!Number.isInteger(maxAgeMs) || maxAgeMs <= 0) throw new Error('classifySnapshot needs a positive integer maxAgeMs (the run\'s freshness budget)');
-  if (captured === null) {
-    return { verdict: SNAPSHOT.UNDATED, capturedAt: null, ageMs: null, maxAgeMs, fresh: false, reason: 'the source snapshot carries no capture time, so its redeemability values cannot be dated' };
-  }
-  const ageMs = at - captured;
-  if (ageMs > maxAgeMs) {
-    return { verdict: SNAPSHOT.STALE, capturedAt: captured, ageMs, maxAgeMs, fresh: false, reason: `the source snapshot is ${Math.round(ageMs / 3600000)}h old and the run's budget is ${Math.round(maxAgeMs / 3600000)}h; a voucher spent since capture would import fully redeemable` };
-  }
-  return { verdict: SNAPSHOT.FRESH, capturedAt: captured, ageMs, maxAgeMs, fresh: true, reason: null };
-}
-
-// Per voucher, immediately before the write. `snapshotCoupon` is the row the
-// plan was built from; `freshCoupon` is the row just re-read from the source, or null when the
-// re-read failed. A failed re-read is UNDECIDABLE and writes nothing -- an undecidable money
-// instrument written active is a giveaway.
-function classifyPreWriteDrift({ snapshotCoupon, freshCoupon } = {}) {
-  if (!snapshotCoupon || !snapshotCoupon.code) throw new Error('classifyPreWriteDrift needs the snapshot coupon row (with a code)');
-  const code = String(snapshotCoupon.code);
-  const parsed = exactAmount(snapshotCoupon.amount);
-  const faceValue = displayAmount(snapshotCoupon.amount);
-  const facePrecisionUnsupported = parsed !== null && parsed.decimals > TARGET_DECIMALS;
-  const base = { code, faceValue, facePrecisionUnsupported, remedy: REMEDY.NONE };
-
-  // A face value the target cannot hold is refused BEFORE anything else. Writing it means the
-  // target silently holds a different amount from the source while every check reports a match,
-  // and that is worse than not writing the coupon at all.
-  if (facePrecisionUnsupported) {
-    return { ...base, outcome: OUTCOMES.PRECISION_UNSUPPORTED, write: false, reason: `the face value ${faceValue} carries more than ${TARGET_DECIMALS} decimal places, which the target cannot hold. Report it; do not round it into the target` };
-  }
-  if (!freshCoupon) {
-    return { ...base, outcome: OUTCOMES.UNDECIDABLE, write: false, reason: 'the pre-write re-read of this coupon did not return a row; redeemability is unknown and unknown is not written' };
-  }
-  const limit = usageLimitOrUnlimited(freshCoupon.usage_limit);
-  const rawLimit = integerOrNull(freshCoupon.usage_limit);
-  const count = integerOrNull(freshCoupon.usage_count);
-  if (count === null || (rawLimit === null && freshCoupon.usage_limit !== 0 && freshCoupon.usage_limit !== null && freshCoupon.usage_limit !== undefined && String(freshCoupon.usage_limit).trim() !== '')) {
-    return { ...base, outcome: OUTCOMES.UNDECIDABLE, write: false, reason: 'the re-read row has unreadable usage fields', usageLimit: freshCoupon.usage_limit, usageCount: freshCoupon.usage_count };
-  }
-  // Unlimited is never exhausted, however high the count.
-  if (limit === null) {
-    return { ...base, outcome: OUTCOMES.WRITE_OK, write: true, writeActive: true, setTags: [TAGS.IMPORTED], usageCount: count, usageLimit: null, usageUnlimited: true };
-  }
-  const snapshotCount = integerOrNull(snapshotCoupon.usage_count) || 0;
-  if (count >= limit) {
-    // An exhausted coupon is WRITTEN, switched off. Skipping it loses the record and
-    // loses the crosswalk row that historical orders referencing this code need. It keeps a
-    // positive limit because the target rejects a limit of zero.
-    return {
-      ...base,
-      outcome: count > snapshotCount ? OUTCOMES.SPENT_AFTER_CAPTURE : OUTCOMES.WRITE_OK,
-      write: true,
-      writeActive: false,
-      setTags: [TAGS.IMPORTED, TAGS.ALREADY_USED],
-      usageCount: count,
-      usageLimit: limit,
-      spentSinceCapture: count > snapshotCount,
-      reason: count > snapshotCount
-        ? `spent at source after the snapshot was captured (${snapshotCount} -> ${count} of ${limit}); written switched off so ${faceValue || 'its value'} cannot be redeemed again, and the record survives`
-        : `already used up at capture (${count} of ${limit}); written switched off as a record of the promotion`,
-    };
-  }
-  const remaining = limit - count;
-  return {
-    ...base,
-    outcome: OUTCOMES.WRITE_OK,
-    write: true,
-    writeActive: true,
-    // The uses the holder has LEFT, never the original limit.
-    writeUsageLimit: remaining,
-    setTags: count > 0 ? [TAGS.IMPORTED, TAGS.PARTIALLY_USED] : [TAGS.IMPORTED],
-    usageCount: count,
-    usageLimit: limit,
-  };
-}
-
-// Per already-written voucher, at cutover. `receipt` is the import receipt
-// ({ code, wixId, kind }); `freshCoupon` is the source row re-read now, or null; `targetCoupon`
-// is the coupon as it reads back on Wix, or null.
-function classifyPostImportDrift({ receipt, freshCoupon, targetCoupon } = {}) {
-  if (!receipt || !receipt.code) throw new Error('classifyPostImportDrift needs an import receipt with a code');
-  const code = String(receipt.code);
-  const wixId = receipt.wixId ? String(receipt.wixId) : null;
-  const rawAmount = exactAmount(freshCoupon && freshCoupon.amount) !== null ? (freshCoupon && freshCoupon.amount) : receipt.faceValue;
-  const parsed = exactAmount(rawAmount);
-  const faceValue = displayAmount(rawAmount);
-  // A face value the target cannot hold is a GAP, never a rounded number that reads as agreement.
-  const facePrecisionUnsupported = parsed !== null && parsed.decimals > TARGET_DECIMALS;
-  const base = { code, wixId, faceValue, facePrecisionUnsupported };
-
-  if (!targetCoupon) {
-    // Not "fine": this surface's read lag is long enough that absent is UNKNOWN, never gone.
-    return { ...base, outcome: OUTCOMES.TARGET_GONE, remedy: REMEDY.ASK, reason: 'the coupon did not read back from the target; this surface\'s read lag makes absent indistinguishable from deleted, so re-read before concluding anything' };
-  }
-  // FINDING 1: `active` must be an explicit boolean. An object with no `active` at all read as
-  // "not true" and therefore as "already switched off" -- a partial or truncated read-back
-  // silently reported a coupon as handled. Absent is UNKNOWN, always.
-  const targetSpec = targetCoupon.specification || targetCoupon;
-  const targetActive = typeof targetSpec.active === 'boolean' ? targetSpec.active : null;
-  if (targetActive === null) {
-    return { ...base, outcome: OUTCOMES.TARGET_STATE_UNREADABLE, remedy: REMEDY.ASK, reason: 'the target row came back without a readable `active` flag, so whether it is redeemable is unknown; re-read rather than assuming either state' };
-  }
-  if (!freshCoupon) {
-    return { ...base, outcome: OUTCOMES.SOURCE_GONE, remedy: REMEDY.ASK, targetActive: targetActive === true, reason: 'the source row for this code was not found in the fresh read; it may have been deleted at source, which is a different decision from being spent' };
-  }
-  const count = integerOrNull(freshCoupon.usage_count);
-  const rawLimit = freshCoupon.usage_limit;
-  const limitReadable = rawLimit === null || rawLimit === undefined || String(rawLimit).trim() === '' || integerOrNull(rawLimit) !== null;
-  if (count === null || !limitReadable) {
-    return { ...base, outcome: OUTCOMES.SOURCE_GONE, remedy: REMEDY.ASK, targetActive, reason: 'the fresh source row has unreadable usage fields, so drift cannot be decided' };
-  }
-  // FINDING 4: 0 / empty means UNLIMITED, so an unlimited coupon is never "spent".
-  const limit = usageLimitOrUnlimited(rawLimit);
-  const spentAtSource = limit !== null && count >= limit;
-  if (spentAtSource && targetActive === true) {
-    return {
-      ...base,
-      outcome: OUTCOMES.REMEDY_PENDING,
-      remedy: REMEDY.DEACTIVATE,
-      targetActive: true,
-      usageCount: count,
-      usageLimit: limit,
-      sourceRedeemedAt: freshCoupon.date_modified_gmt || freshCoupon.date_modified || null,
-      // switch it off and say why in the same call, so the record survives
-      // and is self-explanatory in the dashboard.
-      setTags: [TAGS.IMPORTED, TAGS.ALREADY_USED],
-      reason: `spent at source (${count} of ${limit}) and still active on the target, so ${faceValue || 'its value'} is redeemable a second time. Remedy: deactivate in place and tag ${TAGS.ALREADY_USED} -- the coupon id, code, dates and amount all survive`,
-    };
-  }
-  if (spentAtSource && targetActive === false) {
-    return { ...base, outcome: OUTCOMES.RECONCILED_MATCH, remedy: REMEDY.NONE, targetActive: false, usageCount: count, usageLimit: limit, reason: 'used up at source and already switched off on the target' };
-  }
-  return { ...base, outcome: OUTCOMES.RECONCILED_MATCH, remedy: REMEDY.NONE, targetActive, usageCount: count, usageLimit: limit, usageUnlimited: limit === null, reason: limit === null ? 'unlimited at source and still redeemable on the target' : 'still redeemable at source and still redeemable on the target' };
-}
-
-// Turns the per-voucher verdicts into the remedy plan a human approves: counts,
-// the money still live on the target, and one row per code with everything needed to rule on it.
-// Read-only by construction — this returns a plan, it does not apply one.
-function buildVoucherDriftPlan({ verdicts = [], ordersByCouponCode = {}, currency = null } = {}) {
-  if (!Array.isArray(verdicts)) throw new Error('buildVoucherDriftPlan needs an array of verdicts');
-  const counts = {
-    [OUTCOMES.RECONCILED_MATCH]: 0,
-    [OUTCOMES.REMEDY_PENDING]: 0,
-    [OUTCOMES.SOURCE_GONE]: 0,
-    [OUTCOMES.TARGET_GONE]: 0,
-    [OUTCOMES.TARGET_STATE_UNREADABLE]: 0,
-  };
-  const rows = [];
-  // FINDING 2: precision is judged across ALL verdicts, including the reconciled ones that never
-  // reach `rows`. A coupon whose face value the target cannot hold is a gap whatever its drift
-  // verdict says, and filtering it out before the check produced an approvable plan with no row.
-  const precisionGaps = verdicts.filter((v) => v && v.facePrecisionUnsupported === true)
-    .map((v) => ({ code: v.code, faceValue: v.faceValue, outcome: v.outcome }));
-  let liveLiability = 0n;
-  let liabilityUnknownFor = 0;
-  for (const v of verdicts) {
-    if (!v || !v.outcome) throw new Error('every verdict needs an outcome');
-    if (counts[v.outcome] === undefined) throw new Error(`buildVoucherDriftPlan got a pre-write outcome it cannot plan for: ${v.outcome}`);
-    counts[v.outcome] += 1;
-    if (v.outcome !== OUTCOMES.REMEDY_PENDING && v.remedy === REMEDY.NONE) continue;
-    if (v.outcome === OUTCOMES.REMEDY_PENDING) {
-      // Exact integer arithmetic, and a value the target cannot represent is NOT folded into the
-      // total: a liability figure that quietly rounded its inputs is worse than one that says
-      // which codes it could not count.
-      const minor = v.faceValue === null || v.faceValue === undefined ? null : toMinorUnits(v.faceValue);
-      if (minor === null) liabilityUnknownFor += 1;
-      else liveLiability += minor;
-    }
-    const affectedOrders = ordersByCouponCode[v.code] || [];
-    rows.push({
-      code: v.code,
-      wixId: v.wixId || null,
-      faceValue: v.faceValue === undefined ? null : v.faceValue,
-      facePrecisionUnsupported: v.facePrecisionUnsupported === true,
-      outcome: v.outcome,
-      remedy: v.remedy,
-      targetActive: v.targetActive === true,
-      sourceRedeemedAt: v.sourceRedeemedAt || null,
-      setTags: Array.isArray(v.setTags) ? [...v.setTags] : null,
-      // deleting removes a record an imported order points at through
-      // appliedDiscounts[].coupon.id. The owner rules with that list visible, not after.
-      affectedOrders: [...affectedOrders],
-      reason: v.reason || null,
-    });
-  }
-  rows.sort((a, b) => {
-    const bm = toMinorUnits(b.faceValue) ?? -1n;
-    const am = toMinorUnits(a.faceValue) ?? -1n;
-    return bm === am ? a.code.localeCompare(b.code) : (bm > am ? 1 : -1);
-  });
-
-  const blocking = [];
-  if (precisionGaps.length > 0) {
-    blocking.push({ code: 'voucher-face-value-precision-unsupported', detail: `${precisionGaps.length} coupon(s) carry a face value with more than ${TARGET_DECIMALS} decimal places, which the target cannot hold: ${precisionGaps.slice(0, 5).map((r) => `${r.code} (${r.faceValue})`).join(', ')}. Report the gap — do NOT round it into the target and do not count it in the liability` });
-  }
-  if (counts[OUTCOMES.TARGET_STATE_UNREADABLE] > 0) {
-    blocking.push({ code: 'voucher-target-state-unreadable', detail: `${counts[OUTCOMES.TARGET_STATE_UNREADABLE]} coupon(s) came back without a readable \`active\` flag. Whether they are redeemable is unknown — re-read before approving a plan built on them` });
-  }
-  if (counts[OUTCOMES.TARGET_GONE] > 0) {
-    blocking.push({ code: 'voucher-target-read-incomplete', detail: `${counts[OUTCOMES.TARGET_GONE]} voucher(s) did not read back from the target. Absent is UNKNOWN on this surface, not deleted — re-read after a settle before approving a plan built on it` });
-  }
-  return {
-    counts,
-    rows,
-    // the count and the money are the same fact, and only one of them gets decided on.
-    liability: {
-      currency: currency ? String(currency) : null,
-      live: minorUnitsToDecimal(liveLiability),
-      codes: counts[OUTCOMES.REMEDY_PENDING],
-      // Codes whose face value could not be counted exactly -- unreadable, or carrying more
-      // precision than the target can hold. The total above EXCLUDES them, and saying so is the
-      // point: a total that silently absorbed them would look complete.
-      unknownValueFor: liabilityUnknownFor,
-    },
-    blocking,
-    approvable: blocking.length === 0,
-    // There is no apply path in this module on purpose. A caller that wants to act reads
-    // `rows[].remedy`, gets an explicit owner decision, and is verified afterwards.
-    readOnly: true,
-  };
-}
-
-// Builds the Update Coupon request for a remedy, in the ONE shape that actually
-// writes: a specification carrying ONLY the changed fields, plus a field mask naming them.
-// Refusing to build any other shape is the point -- a caller that spreads the existing
-// specification in gets a 200 and a silent no-op, which is the defect this whole module guards.
-function buildRemedyRequest({ couponId, remedy, setTags } = {}) {
-  if (!couponId) throw new Error('buildRemedyRequest needs the target couponId');
-  if (remedy === REMEDY.DELETE) {
-    return { method: 'DELETE', url: `/stores/v2/coupons/${encodeURIComponent(couponId)}` };
-  }
-  if (remedy !== REMEDY.DEACTIVATE) throw new Error(`buildRemedyRequest knows ${REMEDY.DEACTIVATE} and ${REMEDY.DELETE}, not ${String(remedy)}`);
-  const specification = { active: false };
-  const paths = ['active'];
-  if (setTags !== undefined && setTags !== null) {
-    if (!Array.isArray(setTags) || setTags.some((t) => typeof t !== 'string' || !t)) throw new Error('setTags must be an array of non-empty strings');
-    const unknown = setTags.filter((t) => !KNOWN_TAGS.includes(t));
-    // The vocabulary is frozen on purpose: `tags` cannot be edited without another update, and a
-    // typo'd tag is indistinguishable from a real one to whoever reads the dashboard later.
-    if (unknown.length > 0) throw new Error(`unknown tag(s) ${unknown.join(', ')}; the frozen vocabulary is ${KNOWN_TAGS.join(', ')}`);
-    specification.tags = [...setTags];
-    paths.push('tags');
-  }
-  return {
-    method: 'PATCH',
-    url: `/stores/v2/coupons/${encodeURIComponent(couponId)}`,
-    // ONLY the changed fields. Never the full specification -- see the header block.
-    body: { specification, fieldMask: { paths } },
-  };
-}
-
-// The one thing a caller must never do is believe the status code. Given the response
-// of a remedy call and a read-back taken after a settle, say what actually happened.
-function verifyRemedyApplied({ remedy, responseStatus, readBackAfterSettle, settleMs } = {}) {
-  if (remedy !== REMEDY.DELETE && remedy !== REMEDY.DEACTIVATE) {
-    throw new Error(`verifyRemedyApplied knows ${REMEDY.DEACTIVATE} and ${REMEDY.DELETE}, not ${String(remedy)} `);
-  }
-  const ok = responseStatus === 200 || responseStatus === 204;
-  if (!ok) return { applied: false, verdict: 'remedy-failed', reason: `the ${remedy === REMEDY.DELETE ? 'delete' : 'update'} returned ${String(responseStatus)}` };
-  if (readBackAfterSettle === undefined) {
-    return { applied: false, verdict: 'remedy-unverified', reason: 'a 2xx is not evidence of a change on this surface -- a PATCH carrying the FULL specification alongside a narrow field mask returns 200 with an empty body and writes nothing; pass the post-settle read-back' };
-  }
-  const settleS = Math.round((settleMs || 0) / 1000);
-  if (remedy === REMEDY.DELETE) {
-    if (readBackAfterSettle === null) return { applied: true, verdict: 'remedy-applied', reason: `the code is absent from the target after ~${settleS}s, which is what a delete looks like` };
-    return { applied: false, verdict: 'remedy-unverified', reason: 'the coupon still reads back after the delete; treat as UNKNOWN and re-read, do not re-issue' };
-  }
-  // DEACTIVATE: absent is NOT success here. A deactivated coupon must still be readable; an
-  // absent one means something deleted it, which is a different outcome than the one requested.
-  if (readBackAfterSettle === null) {
-    return { applied: false, verdict: 'remedy-unverified', reason: `the coupon did not read back after ~${settleS}s. A deactivate leaves the record in place, so absent is UNKNOWN (this surface's read lag), never "switched off"` };
-  }
-  const spec = readBackAfterSettle.specification || readBackAfterSettle;
-  // FINDING 1: only an explicit `false` is proof. `{}` and `{active: undefined}` previously fell
-  // through to "applied" -- a truncated or partial read-back reported a coupon as switched off
-  // when nothing had been read at all.
-  if (spec.active === false) {
-    return { applied: true, verdict: 'remedy-applied', reason: `active reads back false after ~${settleS}s${Array.isArray(spec.tags) ? `, tags ${JSON.stringify(spec.tags)}` : ''}` };
-  }
-  if (spec.active === true) {
-    return { applied: false, verdict: 'remedy-unverified', reason: `the update returned 2xx and the coupon still reads back active after ~${settleS}s -- the signature of a full-specification PATCH being silently ignored. Re-send with ONLY the changed fields` };
-  }
-  return { applied: false, verdict: 'remedy-unverified', reason: `the read-back carried no readable \`active\` flag after ~${settleS}s, so nothing was confirmed. Re-read; absent is never proof of a change` };
-}
-
-module.exports = {
-  OUTCOMES,
-  REMEDY,
-  TAGS,
-  KNOWN_TAGS,
-  SNAPSHOT,
-  isBearerVoucher,
-  exactAmount,
-  toMinorUnits,
-  displayAmount,
-  classifySnapshot,
-  classifyPreWriteDrift,
-  classifyPostImportDrift,
-  buildVoucherDriftPlan,
-  buildRemedyRequest,
-  verifyRemedyApplied,
-};

package/skills/wix-replatform/resources/rp-target-wix/lib/customer-member.js

@@ -1,104 +0,0 @@
-'use strict';
-
-// A source customer -> a Wix member.contact, and the phone/name/address mapping that decides
-// what gets carried and what gets refused.
-//
-// Two traps this exists for:
-//   * Create Member's `contact.phones[]` rejects anything that is not already E.164
-//     (VERIFIED LIVE: "050-1234567" 400s INVALID_PHONE; "+972501234567" is accepted). WooCommerce
-//     phones are local-format text, so every phone needs converting or dropping -- never sent
-//     as-is, and never invented when the source shape can't be read with confidence.
-//   * Contacts dedupe on phone number, and Create Member reuses whatever contact already carries
-//     a matching phone -- VERIFIED LIVE: creating a second member with an unrelated name but the
-//     same phone as a FIRST member (even after that first member was deleted -- deleting a member
-//     does not delete its contact) returned the FIRST member's contactId, silently attaching the
-//     second person's name onto the first person's contact record. Two different source customers
-//     who share a phone number (a shared home line, a placeholder store number, a typo) would be
-//     merged into one Wix identity. The caller (wix-writers.js ensureMember) is responsible for
-//     checking Contacts for a phone collision before ever sending a phone on a CREATE.
-
-const { MEMBER_FINDING, tallyMemberOutcomes } = require('../../../lib/member-outcome-registry.js');
-
-// Calling code + whether the national number carries a leading trunk '0' to strip, for the
-// countries this project has needed so far. Deliberately small: an unlisted country REFUSES the
-// phone (findings, not a guess) rather than emitting a plausible-looking wrong number.
-const COUNTRY_PHONE_RULES = Object.freeze({
-  IL: { callingCode: '972', trunkPrefix: '0' },
-  US: { callingCode: '1', trunkPrefix: null },
-  CA: { callingCode: '1', trunkPrefix: null },
-  GB: { callingCode: '44', trunkPrefix: '0' },
-  FR: { callingCode: '33', trunkPrefix: '0' },
-  DE: { callingCode: '49', trunkPrefix: '0' },
-  IT: { callingCode: '39', trunkPrefix: null },
-  ES: { callingCode: '34', trunkPrefix: null },
-  AU: { callingCode: '61', trunkPrefix: '0' },
-  NL: { callingCode: '31', trunkPrefix: '0' },
-});
-
-const E164 = /^\+[1-9]\d{6,14}$/;
-
-// Never invents digits: either the input already carries a confident international shape, or it
-// converts under an explicit, deterministic rule for a known country, or it is refused outright.
-function normalizePhoneE164(rawPhone, countryCode) {
-  const raw = rawPhone === undefined || rawPhone === null ? '' : String(rawPhone).trim();
-  if (!raw) return { ok: false, reason: 'empty' };
-  const asIs = raw.replace(/[\s().-]/g, '');
-  if (E164.test(asIs)) return { ok: true, phone: asIs };
-  const country = countryCode ? String(countryCode).trim().toUpperCase() : '';
-  const rule = COUNTRY_PHONE_RULES[country];
-  if (!rule) return { ok: false, reason: country ? 'unsupported-country' : 'no-country-code' };
-  const digits = raw.replace(/\D/g, '');
-  if (!digits) return { ok: false, reason: 'no-digits' };
-  const national = rule.trunkPrefix && digits.startsWith(rule.trunkPrefix) ? digits.slice(rule.trunkPrefix.length) : digits;
-  if (national.length < 4 || national.length > 14) return { ok: false, reason: 'implausible-length' };
-  const candidate = `+${rule.callingCode}${national}`;
-  if (!E164.test(candidate)) return { ok: false, reason: 'invalid-shape' };
-  return { ok: true, phone: candidate };
-}
-
-// A generic customer -> Member.contact (Create Member's shape: firstName, lastName, phones[],
-// addresses[], no email -- the login email is a sibling field, never here). Findings, not thrown
-// errors: a field this can't carry is reported and dropped, the rest of the contact still writes.
-// Trims BEFORE testing for presence, everywhere -- a whitespace-only value (" ") is truthy as a
-// raw string, and review (2026-09-06) found the field-by-field checks below testing the raw value
-// first: a source record with a lone space in a name or address field would have written that
-// space through as if it were real data, rather than being treated as absent.
-function nonEmpty(value) {
-  if (value === null || value === undefined) return null;
-  const trimmed = String(value).trim();
-  return trimmed === '' ? null : trimmed;
-}
-
-function buildMemberContact({ firstName = null, lastName = null, phone = null, countryCode = null, address = null } = {}) {
-  const findings = [];
-  const contact = {};
-  const first = nonEmpty(firstName); if (first) contact.firstName = first;
-  const last = nonEmpty(lastName); if (last) contact.lastName = last;
-  if (nonEmpty(phone)) {
-    const normalized = normalizePhoneE164(phone, countryCode);
-    if (normalized.ok) contact.phones = [normalized.phone];
-    else findings.push({ code: MEMBER_FINDING.PHONE_NOT_NORMALIZED, reason: normalized.reason });
-  }
-  if (address && typeof address === 'object') {
-    const a = {};
-    const addressLine = nonEmpty(address.addressLine); if (addressLine) a.addressLine = addressLine;
-    const addressLine2 = nonEmpty(address.addressLine2); if (addressLine2) a.addressLine2 = addressLine2;
-    const city = nonEmpty(address.city); if (city) a.city = city;
-    // Free text: Members V1 stores an unrecognized code as `subdivisionFullname` rather than
-    // rejecting it (verified live), so WooCommerce's state field -- sometimes an ISO subdivision
-    // code, sometimes a free-text region name -- is passed through as-is, never validated here.
-    const subdivision = nonEmpty(address.subdivision); if (subdivision) a.subdivision = subdivision;
-    const country = nonEmpty(address.country); if (country) a.country = country.toUpperCase();
-    const postalCode = nonEmpty(address.postalCode); if (postalCode) a.postalCode = postalCode;
-    if (Object.keys(a).length > 0) contact.addresses = [a];
-  }
-  return { contact, findings };
-}
-
-// Mirrors tallyCouponWriteOutcomes / tallyPlanWriteOutcomes's shape. The buckets come from the
-// member outcome registry, which throws on a code it does not know rather than counting it.
-function tallyMemberWriteOutcomes(outcomes = []) {
-  return tallyMemberOutcomes(outcomes);
-}
-
-module.exports = { COUNTRY_PHONE_RULES, normalizePhoneE164, buildMemberContact, tallyMemberWriteOutcomes };